summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2022-07-06drm/i915/guc: Asynchronous flush of GuC log regionsAlan Previn
Both error-capture and relay-logging mechanism use the GuC log infrastructure. That means the KMD must send a log flush complete notification back to GuC after reading the data out. This call is currently being sent synchronously. However, synchronous H2Gs cause problems when the system is backed up. There is no need for this to be synchronous. The KMD wasn't even looking at the return status from it. So make it asynchronous and then there is no issue about time outs. Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220607002314.1451656-2-alan.previn.teres.alexis@intel.com
2022-07-06drm: xlnx: add <linux/io.h> for readl/writelRandy Dunlap
Add a header file to prevent build errors: ../drivers/gpu/drm/xlnx/zynqmp_dp.c: In function ‘zynqmp_dp_write’: ../drivers/gpu/drm/xlnx/zynqmp_dp.c:335:9: error: implicit declaration of function ‘writel’ [-Werror=implicit-function-declaration] 335 | writel(val, dp->iomem + offset); ../drivers/gpu/drm/xlnx/zynqmp_dp.c: In function ‘zynqmp_dp_read’: ../drivers/gpu/drm/xlnx/zynqmp_dp.c:340:16: error: implicit declaration of function ‘readl’ [-Werror=implicit-function-declaration] 340 | return readl(dp->iomem + offset); Fixes: a204f9743b68 ("drm: Remove linux/i2c.h from drm_crtc.h") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Hyun Kwon <hyun.kwon@xilinx.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Michal Simek <michal.simek@xilinx.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220706184224.29116-1-rdunlap@infradead.org
2022-07-06drm/i915: Nuke PCH_JSPVille Syrjälä
JSP is based on ICP and we don't really need to differentiate between the two. So let's just delcare JSP to be ICP. The only slight change here is for Wa_14011294188 which we used to apply for JSP but now we'll only apply to MCC. This should be fine since the issue being dealt with was introduced in TGP and inherited into MCC. JSP being derived from ICP should not need this workaround. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220630150600.24611-4-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-07-06drm/i915: Nuke PCH_MCCVille Syrjälä
MCC is derived from TGP, and we have no real need to differentiate between the two. Thus remove PCH_MCC and just declare it to be PCH_TGP compatible. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220630150600.24611-3-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-07-06drm/i915: Use short PCH names consistentlyVille Syrjälä
The comments regarding PCH compatibility use long vs. short names inconsistently. Just use short names always. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220630150600.24611-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-07-06drm/msm/mdp5: move iommu_domain_alloc() call close to its usageDmitry Baryshkov
Move iommu_domain_alloc() in front of adress space/IOMMU initialization. This allows us to drop final bits of struct mdp5_cfg_platform which remained from the pre-DT days. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/489695/ Link: https://lore.kernel.org/r/20220616081106.350262-3-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-07-06drm/msm/dpu: check both DPU and MDSS devices for the IOMMUDmitry Baryshkov
Follow the lead of MDP5 driver and check both DPU and MDSS devices for the IOMMU specifiers. Historically DPU devices had IOMMU specified in the MDSS device tree node, but as some of MDP5 devices are being converted to the supported by the DPU driver, the driver should adapt and check both devices. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/489696/ Link: https://lore.kernel.org/r/20220616081106.350262-2-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-07-06drm/msm: Fix %d vs %uRob Clark
In debugging fence rollover, I noticed that GPU state capture and devcore dumps were showing me negative fence numbers. Let's fix that and some related signed vs unsigned confusion. Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/489621/ Link: https://lore.kernel.org/r/20220615163532.3013035-1-robdclark@gmail.com
2022-07-06drm/msm/dpu: move struct dpu_hw_blk definition to dpu_hw_utils.hDmitry Baryshkov
There is little point in having a separate header just for a single opaque struct definition. Drop it now and move the struct to the dpu_hw_util.h header. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/488016/ Link: https://lore.kernel.org/r/20220601161349.1517667-5-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-07-06drm/msm/dpu: merge base_off with blk_off in struct dpu_hw_blk_reg_mapDmitry Baryshkov
There is little point in keeping a separate MDP address and block offset in this struct. Merge them to form a new blk_addr field used for all register access. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/488017/ Link: https://lore.kernel.org/r/20220601161349.1517667-4-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-07-06drm/msm/dpu: drop length from struct dpu_hw_blk_reg_mapDmitry Baryshkov
We (nearly) do not use the length field from struct dpu_hw_blk_reg_map, so we can drop it safely. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/488013/ Link: https://lore.kernel.org/r/20220601161349.1517667-3-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-07-06drm/msm/dpu: drop xin_id from struct dpu_hw_blk_reg_mapDmitry Baryshkov
Drop the unused field xin_id. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/488011/ Link: https://lore.kernel.org/r/20220601161349.1517667-2-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-07-06drm/msm/adreno: Allow larger address space sizeRob Clark
The restriction to 4G was strictly to work around 64b math bug in some versions of SQE firmware. This appears to be fixed in a650+ SQE fw, so allow a larger address space size on these devices. Also, add a modparam override for debugging and igt. v2: Send the right version of the patch (ie. the one that actually compiles) Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Chia-I Wu <olvaffe@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/487601/ Link: https://lore.kernel.org/r/20220529180428.2577832-1-robdclark@gmail.com
2022-07-06drm/msm/adreno: Fix up formattingKonrad Dybcio
Leading spaces are not something checkpatch likes, and it says so when they are present. Use tabs consistently to indent function body and unwrap a 83-char-long line, as 100 is cool nowadays. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/487592/ Link: https://lore.kernel.org/r/20220528160353.157870-4-konrad.dybcio@somainline.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-07-06drm/msm/a6xx: Add speedbin support for A619 GPUKonrad Dybcio
There are various SKUs of A619, ranging from 565 MHz to 850 MHz, depending on the bin. Add support for distinguishing them, so that proper frequency ranges can be applied, depending on the HW. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/487590/ Link: https://lore.kernel.org/r/20220528160353.157870-3-konrad.dybcio@somainline.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-07-06drm/msm/adreno: Add A619 supportKonrad Dybcio
Add support for the Adreno 619 GPU, as found in Snapdragon 690 (SM6350), 480 (SM4350) and 750G (SM7225). Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/487588/ Link: https://lore.kernel.org/r/20220528160353.157870-2-konrad.dybcio@somainline.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-07-06drm/msm/adreno: Remove dead codeKonrad Dybcio
This BUG_ON will never be reached, and there is a comment 20 above explaining why. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/487586/ Link: https://lore.kernel.org/r/20220528160353.157870-1-konrad.dybcio@somainline.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-07-06drm/msm: Avoid unclocked GMU register access in 6xx gpu_busyDouglas Anderson
From testing on sc7180-trogdor devices, reading the GMU registers needs the GMU clocks to be enabled. Those clocks get turned on in a6xx_gmu_resume(). Confusingly enough, that function is called as a result of the runtime_pm of the GPU "struct device", not the GMU "struct device". Unfortunately the current a6xx_gpu_busy() grabs a reference to the GMU's "struct device". The fact that we were grabbing the wrong reference was easily seen to cause crashes that happen if we change the GPU's pm_runtime usage to not use autosuspend. It's also believed to cause some long tail GPU crashes even with autosuspend. We could look at changing it so that we do pm_runtime_get_if_in_use() on the GPU's "struct device", but then we run into a different problem. pm_runtime_get_if_in_use() will return 0 for the GPU's "struct device" the whole time when we're in the "autosuspend delay". That is, when we drop the last reference to the GPU but we're waiting a period before actually suspending then we'll think the GPU is off. One reason that's bad is that if the GPU didn't actually turn off then the cycle counter doesn't lose state and that throws off all of our calculations. Let's change the code to keep track of the suspend state of devfreq. msm_devfreq_suspend() is always called before we actually suspend the GPU and msm_devfreq_resume() after we resume it. This means we can use the suspended state to know if we're powered or not. NOTE: one might wonder when exactly our status function is called when devfreq is supposed to be disabled. The stack crawl I captured was: msm_devfreq_get_dev_status devfreq_simple_ondemand_func devfreq_update_target qos_notifier_call qos_max_notifier_call blocking_notifier_call_chain pm_qos_update_target freq_qos_apply apply_constraint __dev_pm_qos_update_request dev_pm_qos_update_request msm_devfreq_idle_work Fixes: eadf79286a4b ("drm/msm: Check for powered down HW in the devfreq callbacks") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Rob Clark <robdclark@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/489124/ Link: https://lore.kernel.org/r/20220610124639.v4.1.Ie846c5352bc307ee4248d7cab998ab3016b85d06@changeid Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-07-06drm/bridge: ti-sn65dsi86: Use atomic variants of drm_bridge_funcsSam Ravnborg
Move away from the deprecated enable/disable operations in drm_bridge_funcs and enable atomic use. v3: - Drop use of DRM_BRIDGE_STATE_OPS v2: - fix build (kernel test robot <lkp@intel.com>) Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Kieran Bingham <kieran.bingham@ideasonboard.com> Cc: Douglas Anderson <dianders@chromium.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220703202724.9553-2-sam@ravnborg.org
2022-07-06drm/mediatek: dpi: Add dp_intf supportGuillaume Ranquet
Dpintf is the displayport interface hardware unit. This unit is similar to dpi and can reuse most of the code. This patch adds support for mt8195-dpintf to this dpi driver. Main differences are: - 4 pixels for one iteration for dp_intf while dpi is 1 pixel for one iteration. - Input of dp_intf is two pixels per iteration. - Some register contents differ slightly between the two components. Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220705102530.1344-6-rex-bc.chen@mediatek.com/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2022-07-06drm/mediatek: dpi: Add pixels_per_iter config supportBo-Chen Chen
The quantity of output for one iteration could be different for dpi and dp_intf. For dp_intf, it's 4 pixels for one iteration it's 1 pixel for one iteration for dpi. Therefore, we add a new config "pixels_per_iter" to control quantity of transferred pixels per iteration. Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220705102530.1344-5-rex-bc.chen@mediatek.com/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2022-07-06drm/mediatek: dpi: Add input_2pixel config supportBo-Chen Chen
The input pixel per iteration could be different, so we add a new config "input_2pixel" to control this. Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220705102530.1344-4-rex-bc.chen@mediatek.com/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2022-07-06drm/mediatek: dpi: Add config to support direct connection to dpi panelsBo-Chen Chen
MediaTek dpi supports direct connection to dpi panels while dp_intf does not support. Therefore, add a config "support_direct_pin" to control this. Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220705102530.1344-3-rex-bc.chen@mediatek.com/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2022-07-06drm/mediatek: dpi: Add YUV422 output supportBo-Chen Chen
Dp_intf supports YUV422 as output format. In MT8195 Chrome project, YUV422 output format is used for 4K resolution. To support this, it is also needed to support color format transfer. Color format transfer is a new feature for both dpi and dpintf of MT8195. The input format could be RGB888 and output format for dp_intf should be YUV422. Therefore, we add a mtk_dpi_matrix_sel() helper to update the DPI_MATRIX_SET register depending on the color format. Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220705102530.1344-2-rex-bc.chen@mediatek.com/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2022-07-06drm/bridge: fsl-ldb: Enable split mode for LVDS dual linkLiu Ying
When LVDS dual link is used, we have to enable the LDB_CTRL_SPLIT_MODE bit. Fixes: 463db5c2ed4a ("drm: bridge: ldb: Implement simple Freescale i.MX8MP LDB bridge") Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Signed-off-by: Liu Ying <victor.liu@nxp.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220701065634.4027537-3-victor.liu@nxp.com Link: https://patchwork.freedesktop.org/patch/msgid/20220701065634.4027537-4-victor.liu@nxp.com
2022-07-06drm/bridge: fsl-ldb: Fix mode clock rate validationLiu Ying
With LVDS dual link, up to 160MHz mode clock rate is supported. With LVDS single link, up to 80MHz mode clock rate is supported. Fix mode clock rate validation by swapping the maximum mode clock rates of the two link modes. Fixes: 463db5c2ed4a ("drm: bridge: ldb: Implement simple Freescale i.MX8MP LDB bridge") Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Signed-off-by: Liu Ying <victor.liu@nxp.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220701065634.4027537-2-victor.liu@nxp.com
2022-07-06drm: bridge: ldb: Drop DE flip from Freescale i.MX8MP LDB bridgeMarek Vasut
The DE inversion is implemented in LCDIFv3 driver and is no longer needed in the LDB bridge which does not invert the DE signal. Drop the inversion. Fixes: 463db5c2ed4ae ("drm: bridge: ldb: Implement simple Freescale i.MX8MP LDB bridge") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Peng Fan <peng.fan@nxp.com> Cc: Robby Cai <robby.cai@nxp.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> To: dri-devel@lists.freedesktop.org Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220630174031.92354-1-marex@denx.de
2022-07-06drm/bridge: anx7625: Add wait_hpd_asserted() callbackHsin-Yi Wang
Move hpd polling check into wait_hpd_asserted() callback. For the cases that aux transfer function wasn't used, do hpd polling check after pm runtime resume, which will power on the bridge. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Xin Ji <xji@analogixsemi.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220706125254.2474095-5-hsinyi@chromium.org
2022-07-06drm/bridge: anx7625: Fix NULL pointer crash when using edp-panelHsin-Yi Wang
Move devm_of_dp_aux_populate_ep_devices() after pm runtime and i2c setup to avoid NULL pointer crash. edp-panel probe (generic_edp_panel_probe) calls pm_runtime_get_sync() to read EDID. At this time, bridge should have pm runtime enabled and i2c clients ready. Fixes: adca62ec370c ("drm/bridge: anx7625: Support reading edid through aux channel") Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Xin Ji <xji@analogixsemi.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220706125254.2474095-4-hsinyi@chromium.org
2022-07-06drm/bridge: anx7625: use pm_runtime_force_suspend(resume)Hsin-Yi Wang
There's no need to check for IRQ or disable it in suspend. Use pm_runtime_force_suspend(resume) to make sure anx7625 is powered off correctly. Make the system suspend/resume and pm runtime suspend/resume more consistent. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Xin Ji <xji@analogixsemi.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220706125254.2474095-3-hsinyi@chromium.org
2022-07-06drm/bridge: anx7625: Convert to devm_i2c_new_dummy_device()Hsin-Yi Wang
Simplify the resource management. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Xin Ji <xji@analogixsemi.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220706125254.2474095-2-hsinyi@chromium.org
2022-07-05drm/amdgpu/display: disable prefer_shadow for generic fb helpersAlex Deucher
Seems to break hibernation. Disable for now until we can root cause it. Fixes: 087451f372bf ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's.") Bug: https://bugzilla.kernel.org/show_bug.cgi?id=216119 Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amdgpu: keep fbdev buffers pinned during suspendAlex Deucher
Was dropped when we converted to the generic helpers. Fixes: 087451f372bf ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's.") Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/display: Remove unused variables from vba_vars_stMaíra Canal
Some variables from the struct vba_vars_st are not referenced in any other place on the codebase. As they are not used, this commit removes those variables. Signed-off-by: Maíra Canal <mairacanal@riseup.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/display: Remove duplicate code across dcn30 and dcn31Maíra Canal
The function CalculateBytePerPixelAnd256BBlockSizes was defined four times: on display_mode_vba_30.c, display_rq_dlg_calc_30.c, display_mode_vba_31.c and display_rq_dlg_calc_31.c. In order to avoid code duplication, the CalculateBytePerPixelAnd256BBlockSizes is defined on display_mode_vba_30.h and used across dcn30 and dcn31. Signed-off-by: Maíra Canal <mairacanal@riseup.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/display: clean up some inconsistent indentingYang Li
Eliminate the follow smatch warning: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:3151 commit_planes_for_stream() warn: inconsistent indenting Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/display: Remove return value of Calculate256BBlockSizesMaíra Canal
The function Calculate256BBlockSizes always returns true, regardless of the parameters. As any file checks the return of the function, this commit changes the return value to void. Signed-off-by: Maíra Canal <mairacanal@riseup.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amdpgu/debugfs: Simplify some exit pathsAndré Almeida
To avoid code repetition, unify the function exit path when possible. No functional changes. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: André Almeida <andrealmeid@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amdgpu/mes: Fix an error handling path in amdgpu_mes_self_test()Jianglei Nie
if amdgpu_mes_ctx_alloc_meta_data() fails, we should call amdgpu_vm_fini() to handle amdgpu_vm_init(). Add a new lable before amdgpu_vm_init() and goto this lable when amdgpu_mes_ctx_alloc_meta_data() fails. Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/display: Maintain old audio programming sequenceAlvin Lee
[Description] Program audio DTO before wall dto for audio Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/display: 3.2.192Aric Cyr
This DC patchset brings improvements in multiple areas. In summary, we highlight: - Program ACP-related registers - Fixes for DMUB, DPIA, PSR, and others - Improvements in the pipe split - Add SubVP code - Add basic setup for FAMS support - Improve BB capabilities Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/display: rename hdmi_frl_pcon_supportHamza Mahfooz
hdmi_frl_pcon_support has been the source of confusion. So, rename it to dp_hdmi21_pcon_support. Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/display: enable PCON SST support for newer ASICsHamza Mahfooz
Generic PCON SST support already exists and works for newer ASICs. So, enable it by default. Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/display: OVT Update on InfoFrame and Mode ManagementChris Park
[Why] Integrate OVT timing from DM to DC logic to update info frame and mode management to report the resolution to the OS. [How] Reflect RID and Frame Rate to AVI InfoFrame Version 5. Define new Timing Standard for OVT timing. Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Chris Park <Chris.Park@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amdgpu/mes11: fix to unmap legacy queueJack Xiao
MES fw updated to support unmapping legacy gfx/compute queue. Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/display: Initialize lt_settings on instantiationMichael Strauss
[WHY] lt_settings' pointers remain uninitialized but nonzero if display fails to light up with no DPCD/EDID info populated, leading to a hang on access Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/display: Fix uninitialized variable.Jimmy Kizito
[Why] Uninitialized variable causes diag compilation build failure. [How] - Ensure that variable in question is always initialized before being used. - The variable in question is the USB4 DP training pattern. In case an unsupported training pattern has been requested, update status accordingly and abort current link training attempt. Reviewed-by: Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/display: Move all linux includes into OS typesHarry Wentland
Move all linux includes into OS types. Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/display: Fix null timing generator resourceEric Bernstein
[Why] For some customer blending transition cases, the available pipe for second stream is a pipe index that is greater than the number of timing generators, which can cause a problem in acquire_first_free_pipe since it assumes same index for pipe and timing generator [How] Added logic to use last timing generator index if the pipe index is greater than number of timing generators. Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/display: Add flag to modify MST delayDuncan Ma
[Why] Some panels may require more MST delay on discovery [How] Add panel patch and debug mst delay flag Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Duncan Ma <duncan.ma@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-10-01 23:37:58 +0000