summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2020-09-15drm/amdgpu: Enable SDMA utilization for ArcturusMukul Joshi
SDMA utilization calculations are enabled/disabled by writing to SDMAx_PUB_DUMMY_REG2 register. Currently, enable this only for Arcturus. Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-15drm/amd/display: Move disable interrupt into commit tailAurabindo Pillai
[Why&How] Since there is no need for accessing crtc state in the interrupt handler, interrupts need not be disabled well in advance, and can be moved to commit_tail where it should be. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-15drm/amd/display: Refactor to prevent crtc state access in DM IRQ handlerAurabindo Pillai
[Why&How] Currently commit_tail holds global locks and wait for dependencies which is against the DRM API contracts. Inorder to fix this, IRQ handler should be able to run without having to access crtc state. Required parameters are copied over so that they can be directly accessed from the interrupt handler Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-15drm/amdgpu: Move existing pflip fields into separate structAurabindo Pillai
[Why&How] To refactor DM IRQ management, all fields used by IRQ is best moved to a separate struct so that main amdgpu_crtc struct need not be changed Location of the new struct shall be in DM Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-15drm/amdgpu: Update RAS init handlingJohn Clements
Output RAS init status If RAS init fails, teardown RAS context Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-15drm/amdkfd: Fix -Wunused-const-variable warningYueHaibing
If KFD_SUPPORT_IOMMU_V2 is not set, gcc warns: drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_device.c:121:37: warning: ‘raven_device_info’ defined but not used [-Wunused-const-variable=] static const struct kfd_device_info raven_device_info = { ^~~~~~~~~~~~~~~~~ As Huang Rui suggested, Raven already has the fallback path, so it should be out of IOMMU v2 flag. Suggested-by: Huang Rui <ray.huang@amd.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-15drm/amdgpu: add ta DTM/HDCP print in amdgpu_firmware_info for apuChangfeng
It needs to add ta DTM/HDCP print to get HDCP/DTM version info when cat amdgpu_firmware_info Signed-off-by: Changfeng <Changfeng.Zhu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-15drm/amd/pm: update driver if version for navy_flounderJiansong Chen
It's in accordance with pmfw 65.8.0 for navy_flounder. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-15drm/amd/pm: update driver if file for sienna cichlidLikun Gao
Update drive if file for sienna_cichlid. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-15drm/amdgpu: Minor checkpatch fixAndrey Grodzovsky
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-15drm/amdgpu: Disable DPC for XGMI for now.Andrey Grodzovsky
XGMI support is more complicated than single device support as questions of synchronization between the device recovering from PCI error and other members of the hive are required. Leaving this for next round. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-15drm/amdgpu: Trim amdgpu_pci_slot_reset by reusing code.Andrey Grodzovsky
Reuse exsisting functions from GPU recovery to avoid code duplications. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-15drm/amdgpu: Fix consecutive DPC recovery failures.Andrey Grodzovsky
Cache the PCI state on boot and before each case where we might loose it. v2: Add pci_restore_state while caching the PCI state to avoid breaking PCI core logic for stuff like suspend/resume. v3: Extract pci_restore_state from amdgpu_device_cache_pci_state to avoid superflous restores during GPU resets and suspend/resumes. v4: Style fixes. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-15drm/amdgpu: Fix SMU error failureAndrey Grodzovsky
Wait for HW/PSP initiated ASIC reset to complete before starting the recovery operations. v2: Remove typo Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-15drm/amdgpu: Block all job scheduling activity during DPC recoveryAndrey Grodzovsky
DPC recovery involves ASIC reset just as normal GPU recovery so block SW GPU schedulers and wait on all concurrent GPU resets. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-15drm/amdgpu: Avoid accessing HW when suspending SW stateAndrey Grodzovsky
At this point the ASIC is already post reset by the HW/PSP so the HW not in proper state to be configured for suspension, some blocks might be even gated and so best is to avoid touching it. v2: Rename in_dpc to more meaningful name Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-15drm/amdgpu: Implement DPC recoveryAndrey Grodzovsky
Add PCI Downstream Port Containment (DPC) with basic recovery functionality v2: remove pci_save_state to avoid breaking suspend/resume v3: Fix style comments v4: Improve description. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-15drm/amdgpu: Do gpu recovery when no job is runningLiu ChengZhe
In function flr_work, we should do gpu recovery when no job is running. Fix the logic by inverting it. v2: modify the description Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Liu ChengZhe <ChengZhe.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-15drm/amdkfd: fix a memory leak issueDennis Li
In the resume stage of GPU recovery, start_cpsch will call pm_init which set pm->allocated as false, cause the next pm_release_ib has no chance to release ib memory. Add pm_release_ib in stop_cpsch which will be called in the suspend stage of GPU recovery. Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Dennis Li <Dennis.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-15drm/kfd: fix a system crash issue during GPU recoveryDennis Li
The crash log as the below: [Thu Aug 20 23:18:14 2020] general protection fault: 0000 [#1] SMP NOPTI [Thu Aug 20 23:18:14 2020] CPU: 152 PID: 1837 Comm: kworker/152:1 Tainted: G OE 5.4.0-42-generic #46~18.04.1-Ubuntu [Thu Aug 20 23:18:14 2020] Hardware name: GIGABYTE G482-Z53-YF/MZ52-G40-00, BIOS R12 05/13/2020 [Thu Aug 20 23:18:14 2020] Workqueue: events amdgpu_ras_do_recovery [amdgpu] [Thu Aug 20 23:18:14 2020] RIP: 0010:evict_process_queues_cpsch+0xc9/0x130 [amdgpu] [Thu Aug 20 23:18:14 2020] Code: 49 8d 4d 10 48 39 c8 75 21 eb 44 83 fa 03 74 36 80 78 72 00 74 0c 83 ab 68 01 00 00 01 41 c6 45 41 00 48 8b 00 48 39 c8 74 25 <80> 78 70 00 c6 40 6d 01 74 ee 8b 50 28 c6 40 70 00 83 ab 60 01 00 [Thu Aug 20 23:18:14 2020] RSP: 0018:ffffb29b52f6fc90 EFLAGS: 00010213 [Thu Aug 20 23:18:14 2020] RAX: 1c884edb0a118914 RBX: ffff8a0d45ff3c00 RCX: ffff8a2d83e41038 [Thu Aug 20 23:18:14 2020] RDX: 0000000000000000 RSI: 0000000000000082 RDI: ffff8a0e2e4178c0 [Thu Aug 20 23:18:14 2020] RBP: ffffb29b52f6fcb0 R08: 0000000000001b64 R09: 0000000000000004 [Thu Aug 20 23:18:14 2020] R10: ffffb29b52f6fb78 R11: 0000000000000001 R12: ffff8a0d45ff3d28 [Thu Aug 20 23:18:14 2020] R13: ffff8a2d83e41028 R14: 0000000000000000 R15: 0000000000000000 [Thu Aug 20 23:18:14 2020] FS: 0000000000000000(0000) GS:ffff8a0e2e400000(0000) knlGS:0000000000000000 [Thu Aug 20 23:18:14 2020] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [Thu Aug 20 23:18:14 2020] CR2: 000055c783c0e6a8 CR3: 00000034a1284000 CR4: 0000000000340ee0 [Thu Aug 20 23:18:14 2020] Call Trace: [Thu Aug 20 23:18:14 2020] kfd_process_evict_queues+0x43/0xd0 [amdgpu] [Thu Aug 20 23:18:14 2020] kfd_suspend_all_processes+0x60/0xf0 [amdgpu] [Thu Aug 20 23:18:14 2020] kgd2kfd_suspend.part.7+0x43/0x50 [amdgpu] [Thu Aug 20 23:18:14 2020] kgd2kfd_pre_reset+0x46/0x60 [amdgpu] [Thu Aug 20 23:18:14 2020] amdgpu_amdkfd_pre_reset+0x1a/0x20 [amdgpu] [Thu Aug 20 23:18:14 2020] amdgpu_device_gpu_recover+0x377/0xf90 [amdgpu] [Thu Aug 20 23:18:14 2020] ? amdgpu_ras_error_query+0x1b8/0x2a0 [amdgpu] [Thu Aug 20 23:18:14 2020] amdgpu_ras_do_recovery+0x159/0x190 [amdgpu] [Thu Aug 20 23:18:14 2020] process_one_work+0x20f/0x400 [Thu Aug 20 23:18:14 2020] worker_thread+0x34/0x410 When GPU hang, user process will fail to create a compute queue whose struct object will be freed later, but driver wrongly add this queue to queue list of the proccess. And then kfd_process_evict_queues will access a freed memory, which cause a system crash. v2: The failure to execute_queues should probably not be reported to the caller of create_queue, because the queue was already created. Therefore change to ignore the return value from execute_queues. Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Dennis Li <Dennis.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-15drm: rcar-du: lvds: Add r8a7742 supportLad Prabhakar
The LVDS encoders on RZ/G1H SoC is identical to the R-Car Gen2 family. Add support for RZ/G1H (R8A7742) SoC to the LVDS encoder driver. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2020-09-15drm: rcar-du: Add r8a7742 supportLad Prabhakar
Add direct support for the r8a7742 (RZ/G1H). The RZ/G1H shares a common, compatible configuration with the r8a7790 (R-Car H2) so that device info structure is reused, the only difference being TCON is unsupported on RZ/G1H (Currently unsupported by the driver). Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2020-09-15drm: rcar-du: Make DRM_RCAR_WRITEBACK depends on DRM_RCAR_DUQian Cai
There is no need to select DRM_RCAR_WRITEBACK if DRM_RCAR_DU=n which just make the generated .config a bit ugly. # ARM devices # # end of ARM devices CONFIG_DRM_RCAR_WRITEBACK=y # # Frame buffer Devices Let DRM_RCAR_WRITEBACK depend on DRM_RCAR_DU instead. Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2020-09-15drm/msm/dp: Use qmp phy for DP PLL and PHYStephen Boyd
Make the necessary changes to the DP driver to use the qmp phy from the common phy framework instead of rolling our own in the drm subsystem. This also removes the PLL code and adds proper includes so things build. Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Cc: Chandan Uddaraju <chandanu@codeaurora.org> Cc: Vara Reddy <varar@codeaurora.org> Cc: Tanmay Shah <tanmay@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Manu Gautam <mgautam@codeaurora.org> Cc: Sandeep Maheswaram <sanm@codeaurora.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Sean Paul <seanpaul@chromium.org> Cc: Jonathan Marek <jonathan@marek.ca> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Rob Clark <robdclark@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-15drm/msm/dp: remove mode hard-coding in case of DP CTSAbhinav Kumar
No need to fix the number of resolutions to one during the video pattern CTS test. The userspace test client will handle both the hotplug as well as picking the right resolution for the test. Changes in v2: rebase on top of latest patchset of dependency Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-15drm/msm/dp: add debugfs nodes for video pattern testsAbhinav Kumar
Add the debugfs nodes needed for the video pattern compliance tests to MSM DP driver. Changes in v2: rebase on top of latest patchset of dependency Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-15drm/msm/dp: move debugfs node to /sys/kernel/debug/dri/*/Abhinav Kumar
Move the MSM DP debugfs node from /sys/kernel/debug/drm_dp to /sys/kernel/debug/dri/*/ as required for video pattern compliance test suite. Changes in v2: rebase on top of latest patchset of dependency Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-15drm/msm/dp: add debugfs support to DP driverAbhinav Kumar
To prepare the MSM DP driver for running video pattern compliance tests introduce debugfs module for it. Changes in v2: rebase on top of latest patchset of dependency Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-15drm/msm/dp: wait for audio notification before disabling clocksAbhinav Kumar
In the current implementation, there is a very small window for the audio side to safely signal the hdmi_code_shutdown() before the clocks are disabled. Add some synchronization between the DP display and DP audio module to safely disable the clocks to avoid unclocked access from audio side. In addition, audio side can open the sound card even if DP monitor is not connected. Avoid programming hardware registers in this case and bail out early. Changes in v4: - removed some leftover prints Changes in v5: - fix crash when user tries to play audio in suspended state Changes in v6: - rebased on top of latest patchset of dependency Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-15drm/msm/dp: signal the hotplug disconnect in the event handlerAbhinav Kumar
Signal the hotplug disconnect event to the audio side in the event handler so that they are notified earlier and have more time to process the disconnect event. Changes in v2: none Changes in v3: none Changes in v4: rebase on top of latest patchset of dependency Changes in v5: rebase on top of latest patchset of dependency Changes in v6: none Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-15drm/msm/dp: add hook_plugged_cb hdmi-codec op for MSM DP driverAbhinav Kumar
Add the hook_plugged_cb op for the MSM DP driver to signal connect and disconnect events to the hdmi-codec driver which in-turn shall notify the audio subsystem to start a new or teardown an existing session. Changes in v2: none Changes in v3: none Changes in v4: rebase on top of latest patchset of dependency Changes in v5: rebase on top of latest patchset of dependency Changes in v6: none Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-15drm/msm/dp: add audio support for Display Port on MSMAbhinav Kumar
Introduce audio support for Display Port on MSM chipsets. This change integrates DP audio sub-module with the main Display Port platform driver. In addition, this change leverages hdmi_codec_ops to expose the operations to the audio driver. Changes in v2: fix up a compilation issue on drm-next branch Changes in v3: none Changes in v4: none Changes in v5: none Changes in v6: rebase on top of latest patchset of dependency Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-15drm/msm/dp: store dp_display in the driver dataAbhinav Kumar
Store the dp_display in the platform driver data instead of the dp_display_private. This is required to allow other sub-modules to reuse the platform driver data. Changes in v3: none Changes in v4: none Changes in v5: none Changes in v6: rebase on top of latest patchset of dependency Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-15drm/msm/dp: Add DP compliance tests on Snapdragon ChipsetsKuogee Hsieh
add event thread to execute events serially from event queue. Also timeout mode is supported which allow an event be deferred to be executed at later time. Both link and phy compliant tests had been done successfully. Changes in v2: -- Fix potential deadlock by removing redundant connect_mutex -- Check and enable link clock during modeset -- Drop unused code and fix function prototypes. -- set sink power to normal operation state (D0) before DPCD read Changes in v3: -- push idle pattern at main link before timing generator off -- add timeout handles for both connect and disconnect Changes in v4: -- add ST_SUSPEND_PENDING to handles suspend/modeset test operations -- clear dp phy aux interrupt status when ERR_DPPHY_AUX error -- send segment addr during edid read -- clear bpp depth before MISC register write Changes in v5: -- add ST_SUSPENDED to fix crash at resume Changes in v6: -- at msm_dp_display_enable() do not return until resume_done to avoid kms commit timeout Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-15drm/msm/dp: Add Display Port HPD featureTanmay Shah
Configure HPD registers in DP controller and enable HPD interrupt. Add interrupt to handle HPD connect and disconnect events. Changes in v8: None Signed-off-by: Tanmay Shah <tanmay@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-15drm/msm/dpu: add display port support in DPUJeykumar Sankaran
Add display port support in DPU by creating hooks for DP encoder enumeration and encoder mode initialization. changes in v2: - rebase on [2] (Sean Paul) - remove unwanted error checks and switch cases (Jordan Crouse) [1] https://lwn.net/Articles/768265/ [2] https://lkml.org/lkml/2018/11/17/87 changes in V3: -- Moved this change as part of the DP driver changes. -- Addressed compilation issues on the latest code base. Changes in v6: -- Fix checkpatch.pl warning Changes in v7: Remove depends-on tag from commit message. Changes in v8: None Changes in v9: None Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Vara Reddy <varar@codeaurora.org> Signed-off-by: Tanmay Shah <tanmay@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-15drm/msm/dp: add support for DP PLL driverChandan Uddaraju
Add the needed DP PLL specific files to support display port interface on msm targets. The DP driver calls the DP PLL driver registration. The DP driver sets the link and pixel clock sources. Changes in v2: -- Update copyright markings on all relevant files. -- Use DRM_DEBUG_DP for debug msgs. Changes in v4: -- Update the DP link clock provider names Changes in V5: -- Addressed comments from Stephen Boyd, Rob clark. Changes in V6: -- Remove PLL as separate driver and include PLL as DP module -- Remove redundant clock parsing from PLL module and make DP as clock provider -- Map USB3 DPCOM and PHY IO using hardcoded register address and move mapping form parser to PLL module -- Access DP PHY modules from same base address using offsets instead of deriving base address of individual module from device tree. -- Remove dp_pll_10nm_util.c and include its functionality in dp_pll_10nm.c -- Introduce new data structures private to PLL module Changes in v7: -- Remove DRM_MSM_DP_PLL config from Makefile and Kconfig -- Remove set_parent from determin_rate API -- Remove phy_pll_vco_div_clk from parent list -- Remove flag CLK_DIVIDER_ONE_BASED -- Remove redundant cell-index property parsing Changes in v8: -- Unregister hardware clocks during driver cleanup Changes in v9: -- Remove redundant Kconfig option DRM_MSM_DP_10NM_PLL Changes in v10: -- Limit 10nm PLL function scope Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Vara Reddy <varar@codeaurora.org> Signed-off-by: Tanmay Shah <tanmay@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-15drm/msm/dp: add displayPort driver supportChandan Uddaraju
Add the needed displayPort files to enable DP driver on msm target. "dp_display" module is the main module that calls into other sub-modules. "dp_drm" file represents the interface between DRM framework and DP driver. Changes in v12: -- Add support of pm ops in display port driver -- Clear bpp depth bits before writing to MISC register -- Fix edid read Previous Change log: https://lkml.kernel.org/lkml/20200818051137.21478-3-tanmay@codeaurora.org/ Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Vara Reddy <varar@codeaurora.org> Signed-off-by: Tanmay Shah <tanmay@codeaurora.org> Co-developed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Co-developed-by: Kuogee Hsieh <khsieh@codeaurora.org> Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org> Co-developed-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Guenter Roeck <groeck@chromium.org> Co-developed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-15drm: add constant N value in helper fileChandan Uddaraju
The constant N value (0x8000) is used by i915 DP driver. Define this value in dp helper header file to use in multiple Display Port drivers. Change i915 driver accordingly. Change in v6: Change commit message Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Vara Reddy <varar@codeaurora.org> Signed-off-by: Tanmay Shah <tanmay@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-15drm/msm: Get rid of the REG_ADRENO offsetsJordan Crouse
As newer GPU families are added it makes less sense to maintain a "generic" version functions for older families. Move adreno_submit() and get_rptr() into the target specific code for a2xx, a3xx and a4xx. Add a parameter to adreno_flush to pass the target specific WPTR register instead of relying on the generic register. All of this gets rid of the last of the REG_ADRENO offsets so remove all all the register definitions and infrastructure. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-15drm/msm: a6xx: Use WHERE_AM_I for eligible targetsJordan Crouse
Support the WHERE_AM_I opcode for the A618, A630 and A640 GPUs if the microcode supports it. The WHERE_AM_I opcode allows the RPTR shadow to be updated in priviliged memory which protects the shadow from being read or written from user submissions. A650 already supports extended APRIV have built in hardware support for to access privilged memory from the CP and can go back to using the hardware RPTR shadow feature. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-15drm/msm: Allow a5xx to mark the RPTR shadow as privilegedJordan Crouse
Newer microcode versions have support for the CP_WHERE_AM_I opcode which allows the RPTR shadow memory to be marked as privileged to protect it from corruption. Move the RPTR shadow into its own buffer and protect it it if the current microcode version supports the new feature. We can also re-enable preemption for those targets that support CP_WHERE_AM_I. Start out by preemptively assuming that we can enable preemption and disable it in a5xx_hw_init if the microcode version comes back as too old. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-15drm/i915: Nuke pointless variableVille Syrjälä
No point in assigning the function return value to a local variable if we're just going to use it the one time. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200630215601.28557-13-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2020-09-15drm/i915: Introduce intel_hpd_hotplug_irqs()Ville Syrjälä
Introduce intel_hpd_hotplug_irqs() as a partner to intel_hpd_enabled_irqs(). There's no need to care about the encoders which we're not exposing, so we can avoid hardcoding the masks in various places. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200630215601.28557-12-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2020-09-15drm/i915: Introduce HPD_PORT_TC<n>Ville Syrjälä
Make a clean split between hpd pins for DDI vs. TC. This matches how the actual hardware is split. And with this we move the DDI/PHY->HPD pin mapping into the encoder init instead of having to remap yet again in the interrupt code. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200630215601.28557-11-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2020-09-15drm/i915: Move hpd_pin setup to encoder initVille Syrjälä
Currently DP/HDMI/DDI encoders init their hpd_pin from the connector init. Let's move it to the encoder init so that we don't need to add platform specific junk to the connector init (which is shared by all g4x+ platforms). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200630215601.28557-10-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2020-09-15drm/i915: Split icp_hpd_detection_setup() into ddi vs. tc partsVille Syrjälä
No reason to stuff both DDI and TC port handling into the same function. Split it into two. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200630215601.28557-9-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2020-09-15drm/i915: Configure GEN11_{TBT,TC}_HOTPLUG_CTL for ports TC5/6Ville Syrjälä
gen11_hpd_detection_setup() is missing ports TC5/6. Add them. TODO: Might be nice to only enable the hpd detection logic for ports we actually have. Should be rolled out for all platforms if/when done... Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200630215601.28557-8-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2020-09-15drm/i915: Nuke the redundant TC/TBT HPD bit definesVille Syrjälä
We have nice parametrized GEN11_{TC,TBT}_HOTPLUG() so nuke the overlapping defines. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200630215601.28557-7-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2020-09-15drm/i915: Add VBT AUX CH H and IVille Syrjälä
As with everything else VBT can now specify AUX CH H or I. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200630215601.28557-6-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
generated by cgit (git 2.34.1) at 2025-09-11 21:40:36 +0000