Age | Commit message (Collapse) | Author |
|
[Why]
On renoir usb-c port stops functioning on resume after f/w update.
New dmub firmware caused regression due to conflict with dmcu.
With new dmub f/w dmcu is superseded and should be disabled.
[How]
- Disable dmcu for all dcn21.
Check dmesg for dmub f/w version.
The old firmware (before regression):
[drm] DMUB hardware initialized: version=0x00000001
All other versions require this patch for renoir.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1735
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
drm_irq_uninstall is called in irq_fini_hw so that irq is disabled in sw
stage. SMU (and maybe other IP blocks) fini_hw will call irq_put for
cleanup and the whole cleanup process will be skipped because of
drm->irq_enable = false.
[How]
Move ip_fini_early before irq_fini_hw.
Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
ROCr needs to be able to identify all devices that have direct access to
fine grain memory, which should include CPUs that are connected to GPUs
over xGMI. The GPU hive ID can be mapped onto the CPU hive ID since the
CPU is part of the hive.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Some registers' access will fail without PSP RL after resume.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We should unreference a gem object instead of an amdgpu bo here.
Fixes: fd9a9f8801de ("drm/amdgpu: Use GEM obj reference for KFD BOs")
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This memory frequency calculated is only used to check if it is zero,
what is not useful as it will never actually be zero.
Also the calculation is wrong, we should be checking other bit to
select the appropriate frequency multiplier while this code is stuck
with a fixed multiplier.
So here dropping it as whole.
v2:
- Also remove memory frequency calculation for gen9 LP platforms
Cc: Yakui Zhao <yakui.zhao@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Fixes: 5d0c938ec9cc ("drm/i915/gen11+: Only load DRAM information from pcode")
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211013010046.91858-1-jose.souza@intel.com
(cherry picked from commit 83f52364b15265aec47d07e02b0fbf4093ab8554)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Confirmed to work with ADV7610 HDMI receiver.
Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Until we better understand the stability issues caused by frequent
frequency changes, lets limit them to a618.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Tested-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20211018153627.2787882-1-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Based on the removal of the g_dp_display and the movement of the
priv->dp lookup into the DP code it's now possible to have multiple
DP instances.
In line with the other controllers in the MSM driver, introduce a
per-compatible list of base addresses which is used to resolve the
"instance id" for the given DP controller. This instance id is used as
index in the priv->dp[] array.
Then extend the initialization code to initialize struct drm_encoder for
each of the registered priv->dp[] and update the logic for associating
each struct msm_dp with the struct dpu_encoder_virt.
A new enum is introduced to document the connection between the
instances referenced in the dpu_intf_cfg array and the controllers in
the DP driver and sc7180 is updated.
Lastly, bump the number of struct msm_dp instances carries by priv->dp
to 3, the currently known maximum number of controllers found in a
Qualcomm SoC.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20211016221843.2167329-6-bjorn.andersson@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
eDP panels might need some power sequencing and backlight management,
so make it possible to associate a drm_panel with an eDP instance and
prepare and enable the panel accordingly.
Now that we know which hardware instance is DP and which is eDP,
parser->parse() is passed the connector_type and the parser is limited
to only search for a panel in the eDP case.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20211016221843.2167329-5-bjorn.andersson@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
As the following patches introduced support for multiple DP blocks in a
platform and some of those block might be eDP it becomes useful to be
able to specify the connector type per block.
Although there's only a single block at this point, the array of descs
and the search in dp_display_get_desc() are introduced here to simplify
the next patch, that does introduce support for multiple DP blocks.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20211016221843.2167329-4-bjorn.andersson@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Functions in the DisplayPort code that relates to individual instances
(encoders) are passed both the struct msm_dp and the struct drm_encoder.
But in a situation where multiple DP instances would exist this means
that the caller need to resolve which struct msm_dp relates to the
struct drm_encoder at hand.
Store a reference to the struct msm_dp associated with each
dpu_encoder_virt to allow the particular instance to be associate with
the encoder in the following patch.
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211016221843.2167329-3-bjorn.andersson@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
As the Qualcomm DisplayPort driver only supports a single instance of
the driver the commonly used struct dp_display is kept in a global
variable. As we introduce additional instances this obviously doesn't
work.
Replace this with a combination of existing references to adjacent
objects and drvdata.
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211016221843.2167329-2-bjorn.andersson@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Turn fault_in_pages_{readable,writeable} into versions that return the
number of bytes not faulted in, similar to copy_to_user, instead of
returning a non-zero value when any of the requested pages couldn't be
faulted in. This supports the existing users that require all pages to
be faulted in as well as new users that are happy if any pages can be
faulted in.
Rename the functions to fault_in_{readable,writeable} to make sure
this change doesn't silently break things.
Neither of these functions is entirely trivial and it doesn't seem
useful to inline them, so move them to mm/gup.c.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
blk-cgroup.h pulls in blkdev.h and thus pretty much all the block
headers. Break this dependency chain by turning wbc_blkcg_css into a
macro and dropping the blk-cgroup.h include.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210920123328.1399408-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Replace the unconditional clflush() with drm_clflush_virt_range()
which does the wbinvd() fallback when clflush is not available.
This time no justification is given for the clflush in the
offending commit.
Cc: stable@vger.kernel.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Fixes: 2c8ab3339e39 ("drm/i915: Pin timeline map after first timeline pin, v4.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014090941.12159-4-ville.syrjala@linux.intel.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
|
|
This one is apparently a "clflush for good measure", so bit more
justification (if you can call it that) than some of the others.
Convert to drm_clflush_virt_range() again so that machines without
clflush will survive the ordeal.
Cc: stable@vger.kernel.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@intel.com> #v1
Fixes: 12ca695d2c1e ("drm/i915: Do not share hwsp across contexts any more, v8.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014090941.12159-3-ville.syrjala@linux.intel.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
|
|
Not all machines have clflush, so don't go assuming they do.
Not really sure why the clflush is even here since hwsp
is supposed to get snooped I thought.
Although in my case we're talking about a i830 machine where
render/blitter snooping is definitely busted. But it might
work for the hswp perhaps. Haven't really reverse engineered
that one fully.
Cc: stable@vger.kernel.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Fixes: b436a5f8b6c8 ("drm/i915/gt: Track all timelines created using the HWSP")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014090941.12159-2-ville.syrjala@linux.intel.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
|
|
The msm_gem_new_impl() function cleans up after itself so there is no
need to call drm_gem_object_put(). Conceptually, it does not make sense
to call a kref_put() function until after the reference counting has
been initialized which happens immediately after this call in the
drm_gem_(private_)object_init() functions.
In the msm_gem_import() function the "obj" pointer is uninitialized, so
it will lead to a crash.
Fixes: 05b849111c07 ("drm/msm: prime support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211013081315.GG6010@kili
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
The "msm_obj->node" list needs to be initialized earlier so that the
list_del() in msm_gem_free_object() doesn't experience a NULL pointer
dereference.
Fixes: 6ed0897cd800 ("drm/msm: Fix debugfs deadlock")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211013081133.GF6010@kili
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Add a missing unlock on the error path if drm_sched_entity_init() fails.
Fixes: 68002469e571 ("drm/msm: One sched entity per process per priority")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211011124005.GE15188@kili
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
'destroy_workqueue()' already drains the queue before destroying it, so
there is no need to flush it explicitly.
Remove the redundant 'flush_workqueue()' calls.
This was generated with coccinelle:
@@
expression E;
@@
- flush_workqueue(E);
destroy_workqueue(E);
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Jyri Sarha <jyri.sarha@iki.fi>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Link: https://lore.kernel.org/r/75e8ba40076ad707d47e3a3670e6b23c1b8b11bc.1633874223.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
The "dp_debug" show function allocates a buffer and piecemeal appends
line by line, checking for buffer overflows etc.
Migrate the function to seq_file, to remove all the extra book keeping
and simplify the function.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211007190211.3158868-1-bjorn.andersson@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
The debugfs code is provided an array of a single drm_connector. Then to
access the connector, the list of all connectors of the DRM device is
traversed and all non-DisplayPort connectors are skipped, to find the
one and only DisplayPort connector.
But as we move to support multiple DisplayPort controllers this will now
find multiple connectors and has no way to distinguish them.
Pass the single connector to dp_debug_get() and use this in the debugfs
functions instead, both to simplify the code and the support the
multiple instances.
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211015232213.1839472-1-bjorn.andersson@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
First argument of cx_debugbus_read() should be 'void __iomem *' rather
than 'void * __iomem' to make sparse happy.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211002183118.748841-1-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Use clk_bulk_* API instead of hand-coding them. Note, this drops support
for legacy clk naming (e.g. "iface_clk" instead of just "iface"),
however all in-kernel device trees were converted long long ago. The
warning is present there since 2017.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211002012715.691406-1-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Add a short delay before clamping to idle frequency on active->idle
transition. It takes ~0.5ms to increase the freq again on the next
idle->active transition, so this helps avoid extra freq transitions
on workloads that bounce between CPU and GPU.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20210927230455.1066297-2-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Before open-coding this a 2nd time, add a helper.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20210927230455.1066297-1-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Not all platforms has P0 at an offset of 0x1000 from the base address,
so add support for specifying each sub-region in DT. The code falls back
to the predefined offsets in the case that only a single reg is
specified, in order to support existing DT.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211001174400.981707-6-bjorn.andersson@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Not all platforms has DP_P0 at offset 0x1000 from the beginning of the
DP block. So split the dss_io_data memory region into a set of
sub-regions, to make it possible in the next patch to specify each of
the sub-regions individually.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211001174400.981707-5-bjorn.andersson@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
In order to deal with multiple memory ranges in the following commit
change the ioremap wrapper to not poke directly into the dss_io_data
struct.
While at it, devm_ioremap_resource() already prints useful error
messages on failure, so omit the unnecessary prints from the caller.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20211001174400.981707-4-bjorn.andersson@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
The non-devres version of ioremap is used, which requires manual
cleanup. But the code paths leading here is mixed with other devres
users, so rely on this for ioremap as well to simplify the code.
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211001174400.981707-3-bjorn.andersson@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
The msm_iommu_new() returns error pointers on failure so check for that
to avoid an Oops.
Fixes: ccac7ce373c1 ("drm/msm: Refactor address space initialization")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211004103806.GD25015@kili
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
There are two problems here:
1) The "seqptr" is used uninitalized when we free it at the end.
2) The a6xx_gmu_get_mmio() function returns error pointers. It never
returns true.
Fixes: 64245fc55172 ("drm/msm/a6xx: use AOP-initialized PDC for a650")
Fixes: f8fc924e088e ("drm/msm/a6xx: Fix PDC register overlap")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211004134530.GB11689@kili
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
The DSI host might be left in some state by the bootloader. If this
state generates an IRQ, it might hang the system by holding the
interrupt line before the driver sets up the DSI host to the known
state.
Move the request_irq into msm_dsi_host_init and pass IRQF_NO_AUTOEN to
it. Call enable/disable_irq after msm_dsi_host_power_on/_off()
functions, so that we can be sure that the interrupt is delivered when
the host is in the known state.
It is not possible to defer the interrupt enablement to a later point,
because drm_panel_prepare might need to communicate with the panel over
the DSI link and that requires working interrupt.
Fixes: a689554ba6ed ("drm/msm: Initial add DSI connector support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20211002010830.647416-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
MDP version v1.16 is almost identical to v1.15 with most significant
difference being presence of second DSI interface. MDP v1.16 is found on
SoCs such as MSM8x53, SDM450, SDM632 (All with Adreno 506).
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210928131929.18567-4-sireeshkodali1@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Add phy configuration for 14nm dsi phy found on MSM8953 SoC. Only
difference from existing configurations are io_start addresses.
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
Link: https://lore.kernel.org/r/20210928131929.18567-3-sireeshkodali1@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
dev_pm_opp_find_freq_exact never return null but ERR_PTR(),so we
should use IS_ERR() to clarify and avoid compilation warnings.
Signed-off-by: Wang Qing <wangqing@vivo.com>
Link: https://lore.kernel.org/r/1604630714-6163-1-git-send-email-wangqing@vivo.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Using DEFINE_DEBUGFS_ATTRIBUTE macro with debugfs_create_file_unsafe()
function in place of the debugfs_create_file() function will make the
file operation struct "reset" aware of the file's lifetime. Additional
details here: https://lists.archive.carbon60.com/linux/kernel/2369498
Issue reported by Coccinelle script:
scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci
Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com>
Link: https://lore.kernel.org/r/9ca2c2e4cbd9ebb282b90f742305fd9b481aacc2.1603998014.git.mh12gx2825@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Delete the conversion from bool value to bool function return.
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Link: https://lore.kernel.org/r/AI*ANACSDfnjQejyeNXUnKoQ.1.1604995827401.Hmail.bernard@vivo.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
clk_prepare_enable/clk_disable_unprepare
Because clk_prepare_enable() and clk_disable_unprepare() already checked
NULL clock parameter, so the additional checks are unnecessary, just
remove them.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201231094935.25737-1-vulab@iscas.ac.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
clk_prepare_enable/clk_disable_unprepare
Because clk_prepare_enable() and clk_disable_unprepare() already checked
NULL clock parameter, so the additional checks are unnecessary, just
remove them.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201231095616.25973-1-vulab@iscas.ac.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
clk_prepare_enable/clk_disable_unprepare
Because clk_prepare_enable() and clk_disable_unprepare() already checked
NULL clock parameter, so the additional checks are unnecessary, just
remove them.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201231094155.25481-1-vulab@iscas.ac.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Fix sparse warning:
drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:1195:41: warning: Using plain integer as NULL pointer
drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:1348:32: warning: Using plain integer as NULL pointer
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Link: https://lore.kernel.org/r/20210510031250.5303-1-bernard@vivo.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Coverity complains of a possible NULL dereference:
CID 120718 (#1 of 1): Dereference null return value (NULL_RETURNS)
23. dereference: Dereferencing a pointer that might be NULL state->bos when
calling msm_gpu_crashstate_get_bo. [show details]
301 msm_gpu_crashstate_get_bo(state, submit->bos[i].obj,
302 submit->bos[i].iova, submit->bos[i].flags);
Fix this by employing the same state->bos NULL check as is used in the next
for loop.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210929162554.14295-1-tim.gardner@canonical.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
The variable bpp is being initialized with a value that is never
read, it is being updated later on in both paths of an if statement.
The assignment is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210929105458.209895-1-colin.king@canonical.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
These aren't used. And if we add use for them later, we should probably
do something a bit more structured than string parsing.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210928162903.1104847-1-robdclark@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
For now, since we have a mix of bridges which support this flag, which
which do *not* support this flag, or work both ways, try it once with
NO_CONNECTOR and then fall back to the old way if that doesn't work.
Eventually we can drop the fallback path.
v2: Add missing drm_connector_attach_encoder() so display actually comes
up when the bridge properly handles the NO_CONNECTOR flag
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210920225801.227211-2-robdclark@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
The only usage of hdmi_8996_pll_ops is to assign its address to the ops
field in the clk_init_data struct, and the only usage of pll_init is to
assign its address to the init field in the clk_hw struct, both which
are pointers to const. Make them const to allow the compiler to put them
in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210920212014.40520-1-rikard.falkeborn@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
div_u64_rem provides the result of the division and additionally the
remainder; don't use this function to solely calculate the remainder
while calculating the division again with div_u64.
A similar improvement was applied earlier to the 10nm pll in
5c191fef4ce2 ("drm/msm/dsi_pll_10nm: Fix dividing the same numbers
twice").
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-By: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20211011201642.167700-1-marijn.suijten@somainline.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
|