summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2025-03-11drm/amdkfd: delete stray tab in kfd_dbg_set_mes_debug_mode()Dan Carpenter
These lines are indented one tab more than they should be. Delete the stray tabs. Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-11drm/amdgpu/gfx: delete stray tabsDan Carpenter
These lines are indented one tab too far. Delete the extra tabs. Reviewed-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-11drm/i915: Increase I915_PARAM_MMAP_GTT_VERSION version to indicate support ↵José Roberto de Souza
for partial mmaps Commit 255fc1703e42 ("drm/i915/gem: Calculate object page offset for partial memory mapping") was the last patch of several patches fixing multiple partial mmaps. But without a bump in I915_PARAM_MMAP_GTT_VERSION there is no clean way for UMD to know if it can do multiple partial mmaps. Fixes: 255fc1703e42 ("drm/i915/gem: Calculate object page offset for partial memory mapping") Cc: Andi Shyti <andi.shyti@linux.intel.com> Cc: Nirmoy Das <nirmoy.das@intel.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250306210827.171147-1-jose.souza@intel.com
2025-03-11printk: Rename console_start to console_resumeMarcos Paulo de Souza
The intent of console_start was to resume a previously suspended console, so rename it accordingly. Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: John Ogness <john.ogness@linutronix.de> Link: https://lore.kernel.org/r/20250226-printk-renaming-v1-4-0b878577f2e6@suse.com [pmladek@suse.com: Fixed typo in the commit message. Updated also new drm_log.c.] Signed-off-by: Petr Mladek <pmladek@suse.com>
2025-03-11printk: Rename console_stop to console_suspendMarcos Paulo de Souza
The intent of console_stop was in fact to suspend it, so rename the function accordingly. Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: John Ogness <john.ogness@linutronix.de> Link: https://lore.kernel.org/r/20250226-printk-renaming-v1-3-0b878577f2e6@suse.com [pmladek@suse.com: Fixed typo in the commit message. Updated also new drm_log.c] Signed-off-by: Petr Mladek <pmladek@suse.com>
2025-03-11drm/dp_mst: Fix locking when skipping CSN before topology probingImre Deak
The handling of the MST Connection Status Notify message is skipped if the probing of the topology is still pending. Acquiring the drm_dp_mst_topology_mgr::probe_lock for this in drm_dp_mst_handle_up_req() is problematic: the task/work this function is called from is also responsible for handling MST down-request replies (in drm_dp_mst_handle_down_rep()). Thus drm_dp_mst_link_probe_work() - holding already probe_lock - could be blocked waiting for an MST down-request reply while drm_dp_mst_handle_up_req() is waiting for probe_lock while processing a CSN message. This leads to the probe work's down-request message timing out. A scenario similar to the above leading to a down-request timeout is handling a CSN message in drm_dp_mst_handle_conn_stat(), holding the probe_lock and sending down-request messages while a second CSN message sent by the sink subsequently is handled by drm_dp_mst_handle_up_req(). Fix the above by moving the logic to skip the CSN handling to drm_dp_mst_process_up_req(). This function is called from a work (separate from the task/work handling new up/down messages), already holding probe_lock. This solves the above timeout issue, since handling of down-request replies won't be blocked by probe_lock. Fixes: ddf983488c3e ("drm/dp_mst: Skip CSN if topology probing is not done yet") Cc: Wayne Lin <Wayne.Lin@amd.com> Cc: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org # v6.6+ Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250307183152.3822170-1-imre.deak@intel.com
2025-03-11Merge tag 'drm-intel-next-2025-03-10' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next drm/i915 feature pull #2 for v6.15: Features and functionality: - FBC dirty rectangle support for display version 30+ (Vinod) - Update plane scalers via DSB based commits (Ville) - Move runtime power status info to display power debugfs (Jani) Refactoring and cleanups: - Convert i915 and xe to DRM client setup (Thomas) - Refactor and clean up CDCLK/bw/dbuf readout/sanitation (Ville) - Conversions from drm_i915_private to struct intel_display (Jani, Suraj) - Refactor display reset for better separation between display and core (Jani) - Move panel fitter code together (Jani) - Add mst and hdcp sub-structs to display structs for clarity (Jani) - Header refactoring to clarify separation between display and i915 core (Jani) Fixes: - Fix DP MST max stream count to match number of pipes (Jani) - Fix encoder HW state readout of DP MST UHBR (Imre) - Fix ICL+ combo PHY cursor and coeff polarity programming (Ville) - Fix pipeDMC and ATS fault handling (Ville) - Display workarounds (Gustavo) - Remove duplicate forward declaration (Vinod) - Improve POWER_DOMAIN_*() macro type safety (Gustavo) - Move CDCLK post plane programming later (Ville) DRM core changes: - Add client-hotplug helper (Thomas) - Send pending hotplug events after client resume (Thomas) - Add fb_restore and fb_set_suspend fb helper hooks (Thomas) - Remove struct fb_probe fb helper hook (Thomas) - Add const qualifier to drm_atomic_helper_damage_merged() (Vinod) Xe driver changes: - Convert i915 and xe to DRM client setup (Thomas) - Refactor i915 compat headers (Jani) - Fix fbdev GGTT mapping handling (Maarten) - Figure out pxp instance from the gem object (Jani) Merges: - Backmerge drm-next to fix conflicts with drm-xe-next (Jani) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87o6y9gpub.fsf@intel.com
2025-03-11Merge tag 'drm-xe-next-2025-03-07' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next UAPI Changes: - Expose per-engine activity via perf pmu (Riana, Lucas, Umesh) - Add support for EU stall sampling (Harish, Ashutosh) - Allow userspace to provide low latency hint for submission (Tejas) - GPU SVM and Xe SVM implementation (Matthew Brost) Cross-subsystem Changes: - devres handling for component drivers (Lucas) - Backmege drm-next to allow cross dependent change with i915 - GPU SVM and Xe SVM implementation (Matthew Brost) Core Changes: Driver Changes: - Fixes to userptr and missing validations (Matthew Auld, Thomas Hellström, Matthew Brost) - devcoredump typos and error handling improvement (Shuicheng) - Allow oa_exponent value of 0 (Umesh) - Finish moving device probe to devm (Lucas) - Fix race between submission restart and scheduled being freed (Tejas) - Fix counter overflows in gt_stats (Francois) - Refactor and add missing workarounds and tunings for pre-Xe2 platforms (Aradhya, Tvrtko) - Fix PXP locks interaction with exec queues being killed (Daniele) - Eliminate TIMESTAMP_OVERRIDE from xe (Matt Roper) - Change xe_gen_wa_oob to allow building on MacOS (Daniel Gomez) - New workarounds for Panther Lake (Tejas) - Fix VF resume errors (Satyanarayana) - Fix workaround infra skipping some workarounds dependent on engine initialization (Tvrtko) - Improve per-IP descriptors (Gustavo) - Add more error injections to probe sequence (Francois) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ilc5jvtyaoyi6woyhght5a6sw5jcluiojjueorcyxbynrcpcjp@mw2mi6rd6a7l
2025-03-11Merge tag 'drm-msm-next-2025-03-09' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-next Updates for v6.15 GPU: - Fix obscure GMU suspend failure - Expose syncobj timeline support - Extend GPU devcoredump with pagetable info - a623 support - Fix a6xx gen1/gen2 indexed-register blocks in gpu snapshot / devcoredump Display: - Add cpu-cfg interconnect paths on SM8560 and SM8650 - Introduce KMS OMMU fault handler, causing devcoredump snapshot - Fixed error pointer dereference in msm_kms_init_aspace() DPU: - Fix mode_changing handling - Add writeback support on SM6150 (QCS615) - Fix DSC programming in 1:1:1 topology - Reworked hardware resource allocation, moving it to the CRTC code - Enabled support for Concurrent WriteBack (CWB) on SM8650 - Enabled CDM blocks on all relevant platforms - Reworked debugfs interface for BW/clocks debugging - Clear perf params before calculating bw - Support YUV formats on writeback - Fixed double inclusion - Fixed writeback in YUV formats when using cloned output, Dropped wb2_formats_rgb - Corrected dpu_crtc_check_mode_changed and struct dpu_encoder_virt kerneldocs - Fixed uninitialized variable in dpu_crtc_kickoff_clone_mode() DSI: - DSC-related fixes - Rework clock programming DSI PHY: - Fix 7nm (and lower) PHY programming - Add proper DT schema definitions for DSI PHY clocks HDMI: - Rework the driver, enabling the use of the HDMI Connector framework Bindings: - Added eDP PHY on SA8775P Misc: - mailmap/MAINTAINERS: update Dmitry's email addr Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGu-rbEFzQQ-me6qRLgBOJ=Xro1PL=PhtKJ-K9=bCaiK0w@mail.gmail.com
2025-03-10drm/sti: move to devm_platform_ioremap_resource() usageAnusha Srivatsa
Replace platform_get_resource/_byname + devm_ioremap with just devm_platform_ioremap_resource() Used Coccinelle to do this change. SmPl patch: @rule@ identifier res; expression ioremap; identifier pdev; constant mem; expression name; @@ -struct resource *res; ... -res = platform_get_resource_byname(pdev,mem,name); <... -if (!res) { -... -} ...> -ioremap = devm_ioremap(...); +ioremap = devm_platform_ioremap_resource_byname(pdev,name); and @rule_2@ identifier res; expression ioremap; identifier pdev; @@ -struct resource *res; ... -res = platform_get_resource(pdev,...); <... -if (!res) { -... -} ...> -ioremap = devm_ioremap(...); +ioremap = devm_platform_ioremap_resource(pdev,0); v2: Fix compilation error. v3: Handle returns properly since the new API return error pointers and not NULL Cc: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> Cc: Alain Volmat <alain.volmat@foss.st.com> Reviewed-by: Maxime Ripard <mripard@kernel.org>(v2) Acked-by: Raphael Gallais-Pou <rgallaispou@gmail.com>(v2) Signed-off-by: Anusha Srivatsa <asrivats@redhat.com> Link: https://patchwork.freedesktop.org/patch/640854/?series=144073&rev=5
2025-03-10drm/sprd: move to devm_platform_ioremap_resource() usageAnusha Srivatsa
Replace platform_get_resource + devm_ioremap with just devm_platform_ioremap_resource() Used Coccinelle to do this change. SmPl patch: @rule_2@ identifier res; expression ioremap; identifier pdev; @@ -struct resource *res; ... -res = platform_get_resource(pdev,...); <... -if (!res) { -... -} ...> -ioremap = devm_ioremap(...); +ioremap = devm_platform_ioremap_resource(pdev,0); v2: Address the return handling properly since the new API returns error pointers and not NULL. Cc: Chunyan Zhang <zhang.lyra@gmail.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Anusha Srivatsa <asrivats@redhat.com> Reviewed-by: Chunyan Zhang <zhang.lyra@gmail.com>(v1) Reviewed-by: Maxime Ripard <mripard@kernel.org>(v1) Link: https://patchwork.freedesktop.org/patch/640854/?series=144073&rev=5
2025-03-10drm/amdgpu: Trigger a wedged event for ring resetAndré Almeida
Instead of only triggering a wedged event for complete GPU resets, trigger for ring resets. Regardless of the reset, it's useful for userspace to know that it happened because the kernel will reject further submissions from that app. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: André Almeida <andrealmeid@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/vmwgfx: Add error path for xa_store in vmw_bo_add_detached_resourceKeisuke Nishimura
The xa_store() may fail due to memory allocation failure because there is no guarantee that the index is already used. This fix introduces new paths to handle the error. This patch also aligns the order of function calls by calling vmw_bo_add_detached_resource() before ttm_prime_object_init() in order to allow consistent error handling. Fixes: d6667f0ddf46 ("drm/vmwgfx: Fix handling of dumb buffers") Signed-off-by: Keisuke Nishimura <keisuke.nishimura@inria.fr> Signed-off-by: Zack Rusin <zack.rusin@broadcom.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250225145223.34773-1-keisuke.nishimura@inria.fr
2025-03-10drm/vmwgfx: Add seqno waiter for sync_filesIan Forbes
Because sync_files are passive waiters they do not participate in the processing of fences like the traditional vmw_fence_wait IOCTL. If userspace exclusively uses sync_files for synchronization then nothing in the kernel actually processes fence updates as interrupts for fences are masked and ignored if the kernel does not indicate to the SVGA device that there are active waiters. This oversight results in a bug where the entire GUI can freeze waiting on a sync_file that will never be signalled as we've masked the interrupts to signal its completion. This bug is incredibly racy as any process which interacts with the fencing code via the 3D stack can process the stuck fences on behalf of the stuck process causing it to run again. Even a simple app like eglinfo is enough to resume the stuck process. Usually this bug is seen at a login screen like GDM because there are no other 3D apps running. By adding a seqno waiter we re-enable interrupt based processing of the dma_fences associated with the sync_file which is signalled as part of a dma_fence_callback. This has likely been broken since it was initially added to the kernel in 2017 but has gone unnoticed until mutter recently started using sync_files heavily over the course of 2024 as part of their explicit sync support. Fixes: c906965dee22 ("drm/vmwgfx: Add export fence to file descriptor support") Signed-off-by: Ian Forbes <ian.forbes@broadcom.com> Signed-off-by: Zack Rusin <zack.rusin@broadcom.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250228200633.642417-1-ian.forbes@broadcom.com
2025-03-10drm/vmwgfx: Bump the minor versionZack Rusin
Bump the minor version of vmwgfx in order to detect releases where the cursor issues have been fixed. Cursors created with dumb buffer were broken on vmwgfx. Userspace (e.g. kwin) has workarounds for those issues and often disables hardware cursors on vmwgfx. This allows enabling hardware cursors on vmwgfx again. Signed-off-by: Zack Rusin <zack.rusin@broadcom.com> Reviewed-by: Maaz Mombasawala <maaz.mombasawala@broadcom.com> Reviewed-by: Martin Krastev <martin.krastev@broadcom.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250307125836.3877138-3-zack.rusin@broadcom.com
2025-03-10drm/vmwgfx: Refactor cursor handlingZack Rusin
Refactor cursor handling to make the code maintainable again. Over the last 12 years the svga device improved support for virtualized cursors and at the same time the drm interfaces evolved quite a bit from pre-atomic to current atomic ones. vmwgfx only added new code over the years, instead of adjusting/refactoring the paths. Export the cursor plane handling to its own file. Remove special handling of the legacy cursor support to make it fit within the global cursor plane mechanism. Finally redo dirty tracking because memcmp never worked correctly resulting in the cursor not being properly updated in the guest. Signed-off-by: Zack Rusin <zack.rusin@broadcom.com> Reviewed-by: Maaz Mombasawala <maaz.mombasawala@broadcom.com> Reviewed-by: Martin Krastev <martin.krastev@broadcom.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250307125836.3877138-2-zack.rusin@broadcom.com
2025-03-10drm/amdgpu/vce2: fix ip block referenceAlex Deucher
Need to use the correct IP block type. VCE vs VCN. Fixes mclk issues on Hawaii. Suggested by selendym. Fixes: 82ae6619a450 ("drm/amdgpu: update the handle ptr in wait_for_idle") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3997 Reviewed-by: Boyuan Zhang <Boyuan.Zhang@amd.com> Cc: Sunil Khatri <sunil.khatri@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 02438acd252395628d74cfac692efbb676d21521) Cc: stable@vger.kernel.org
2025-03-10drm/amd/display: Fix slab-use-after-free on hdcp_workMario Limonciello
[Why] A slab-use-after-free is reported when HDCP is destroyed but the property_validate_dwork queue is still running. [How] Cancel the delayed work when destroying workqueue. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4006 Fixes: da3fd7ac0bcf ("drm/amd/display: Update CP property based on HW query") Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 725a04ba5a95e89c89633d4322430cfbca7ce128) Cc: stable@vger.kernel.org
2025-03-10drm/amd/display: Assign normalized_pix_clk when color depth = 14Alex Hung
[WHY & HOW] A warning message "WARNING: CPU: 4 PID: 459 at ... /dc_resource.c:3397 calculate_phy_pix_clks+0xef/0x100 [amdgpu]" occurs because the display_color_depth == COLOR_DEPTH_141414 is not handled. This is observed in Radeon RX 6600 XT. It is fixed by assigning pix_clk * (14 * 3) / 24 - same as the rests. Also fixes the indentation in get_norm_pix_clk. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 274a87eb389f58eddcbc5659ab0b180b37e92775) Cc: stable@vger.kernel.org
2025-03-10drm/amd/display: Restore correct backlight brightness after a GPU resetMario Limonciello
[Why] GPU reset will attempt to restore cached state, but brightness doesn't get restored. It will come back at 100% brightness, but userspace thinks it's the previous value. [How] When running resume sequence if GPU is in reset restore brightness to previous value. Acked-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 5e19e2b57b6bb640d68dfc7991e1e182922cf867) Cc: stable@vger.kernel.org
2025-03-10drm/amd/display: fix default brightnessMario Limonciello
[Why] To avoid flickering during boot default brightness level set by BIOS should be maintained for as much of the boot as feasible. commit 2fe87f54abdc ("drm/amd/display: Set default brightness according to ACPI") attempted to set the right levels for AC vs DC, but brightness still got reset to maximum level in initialization code for setup_backlight_device(). [How] Remove the hardcoded initialization in setup_backlight_device() and instead program brightness value to match BIOS (AC or DC). This avoids a brightness flicker from kernel changing the value. Userspace may however still change it during boot. Fixes: 2fe87f54abdc ("drm/amd/display: Set default brightness according to ACPI") Acked-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 0747acf3311229e22009bec4a9e7fc30c879e842) Cc: stable@vger.kernel.org
2025-03-10drm/amd/display: Disable unneeded hpd interrupts during dm_initLeo Li
[Why] It seems HPD interrupts are enabled by default for all connectors, even if the hpd source isn't valid. An eDP for example, does not have a valid hpd source (but does have a valid hpdrx source; see construct_phy()). Thus, eDPs should have their hpd interrupt disabled. In the past, this wasn't really an issue. Although the driver gets interrupted, then acks by writing to hw registers, there weren't any subscribed handlers that did anything meaningful (see register_hpd_handlers()). But things changed with the introduction of IPS. s2idle requires that the driver allows IPS for DMUB fw to put hw to sleep. Since register access requires hw to be awake, the driver will block IPS entry to do so. And no IPS means no hw sleep during s2idle. This was the observation on DCN35 systems with an eDP. During suspend, the eDP toggled its hpd pin as part of the panel power down sequence. The driver was then interrupted, and acked by writing to registers, blocking IPS entry. [How] Since DC marks eDP connections as having invalid hpd sources (see construct_phy()), DM should disable them at the hw level. Do so in amdgpu_dm_hpd_init() by disabling all hpd ints first, then selectively enabling ones for connectors that have valid hpd sources. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 7b1ba19eb15f88e70782642ce2d934211269337b) Cc: stable@vger.kernel.org
2025-03-10drm/amd: Keep display off while going into S4Mario Limonciello
When userspace invokes S4 the flow is: 1) amdgpu_pmops_prepare() 2) amdgpu_pmops_freeze() 3) Create hibernation image 4) amdgpu_pmops_thaw() 5) Write out image to disk 6) Turn off system Then on resume amdgpu_pmops_restore() is called. This flow has a problem that because amdgpu_pmops_thaw() is called it will call amdgpu_device_resume() which will resume all of the GPU. This includes turning the display hardware back on and discovering connectors again. This is an unexpected experience for the display to turn back on. Adjust the flow so that during the S4 sequence display hardware is not turned back on. Reported-by: Xaver Hugl <xaver.hugl@gmail.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2038 Cc: Muhammad Usama Anjum <usama.anjum@collabora.com> Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Link: https://lore.kernel.org/r/20250306185124.44780-1-mario.limonciello@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 68bfdc8dc0a1a7fdd9ab61e69907ae71a6fd3d91)
2025-03-10drm/amd/display: fix missing .is_two_pixels_per_containerAliaksei Urbanski
Starting from 6.11, AMDGPU driver, while being loaded with amdgpu.dc=1, due to lack of .is_two_pixels_per_container function in dce60_tg_funcs, causes a NULL pointer dereference on PCs with old GPUs, such as R9 280X. So this fix adds missing .is_two_pixels_per_container to dce60_tg_funcs. Reported-by: Rosen Penev <rosenp@gmail.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3942 Fixes: e6a901a00822 ("drm/amd/display: use even ODM slice width for two pixels per container") Signed-off-by: Aliaksei Urbanski <aliaksei.urbanski@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit bd4b125eb949785c6f8a53b0494e32795421209d) Cc: stable@vger.kernel.org
2025-03-10drm/amdgpu/display: Allow DCC for video formats on GFX12David Rosca
We advertise DCC as supported for NV12/P010 formats on GFX12, but it would fail on this check on atomic commit. Signed-off-by: David Rosca <david.rosca@amd.com> Reviewed-by: Ruijing Dong <ruijing.dong@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit ba795235a2b99ba9bbef647ab003b2f3145d9bbb) Cc: stable@vger.kernel.org # 6.12.x
2025-03-10drm/xe: remove redundant check in xe_vm_create_ioctl()Xin Wang
The check for args->extensions is repeated twice in xe_vm_create_ioctl(). This commit removes the redundant check to streamline the code. Fixes: 7224788f6756 ("drm/xe: Kill XE_VM_PROPERTY_BIND_OP_ERROR_CAPTURE_ADDRESS extension") Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Xin Wang <x.wang@intel.com> Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250303004942.951699-1-x.wang@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit 8da8aecf1f2d89c2b8188bcf7aa252ec146ddd12) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-03-10drm/amdgpu/vce2: fix ip block referenceAlex Deucher
Need to use the correct IP block type. VCE vs VCN. Fixes mclk issues on Hawaii. Suggested by selendym. Fixes: 82ae6619a450 ("drm/amdgpu: update the handle ptr in wait_for_idle") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3997 Reviewed-by: Boyuan Zhang <Boyuan.Zhang@amd.com> Cc: Sunil Khatri <sunil.khatri@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: change kzalloc to kcalloc in dml1_validate()Ethan Carter Edwards
We are trying to get rid of all multiplications from allocation functions to prevent integer overflows. Here the multiplication is probably safe, but using kcalloc() is more appropriate and improves readability. This patch has no effect on runtime behavior. Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: change kzalloc to kcalloc in dcn314_validate_bandwidth()Ethan Carter Edwards
We are trying to get rid of all multiplications from allocation functions to prevent integer overflows. Here the multiplication is probably safe, but using kcalloc() is more appropriate and improves readability. This patch has no effect on runtime behavior. Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: change kzalloc to kcalloc in dcn31_validate_bandwidth()Ethan Carter Edwards
We are trying to get rid of all multiplications from allocation functions to prevent integer overflows. Here the multiplication is probably safe, but using kcalloc() is more appropriate and improves readability. This patch has no effect on runtime behavior. Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: change kzalloc to kcalloc in dcn30_validate_bandwidth()Ethan Carter Edwards
We are trying to get rid of all multiplications from allocation functions to prevent integer overflows. Here the multiplication is probably safe, but using kcalloc() is more appropriate and improves readability. This patch has no effect on runtime behavior. Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Promote DAL to 3.2.324Taimur Hassan
This version brings along following fixes: - Fix some Replay/PSR issue - Fix backlight brightness - Fix suspend issue - Fix visual confirm color - Add scoped mutexes for amdgpu_dm_dhcp Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: remove minimum Dispclk and apply oem panel timing.Charlene Liu
[why & how] 1. apply oem panel timing (not only on OLED) 2. remove MIN_DPP_DISP_CLK request in driver. This fix will apply for dcn31x but not sync with DML's output. Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Drop unnecessary ret variable for enable_assr()Mario Limonciello
[Why] enable_assr() has a res variable that only is changed in one block with no cleanup necessary. [How] Remove variable and return early from failure cases. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Add scoped mutexes for amdgpu_dm_dhcpMario Limonciello
[Why] Guards automatically release mutex when it goes out of scope making code easier to follow. [How] Replace all use of mutex_lock()/mutex_unlock() with guard(mutex). Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Fix slab-use-after-free on hdcp_workMario Limonciello
[Why] A slab-use-after-free is reported when HDCP is destroyed but the property_validate_dwork queue is still running. [How] Cancel the delayed work when destroying workqueue. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4006 Fixes: da3fd7ac0bcf ("drm/amd/display: Update CP property based on HW query") Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Prevent VStartup OverflowRyan Seto
[Why] For some VR headsets with large blanks, it's possible to overflow the OTG_VSTARTUP_PARAM:VSTARTUP_START register. This can lead to incorrect DML calculations and underflow downstream. [How] Min the calcualted max_vstartup_lines with the max value of the register. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Ryan Seto <ryanseto@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Correct timing_adjust_pending flag setting.Zhongwei Zhang
[Why&How] stream->adjust will be overwritten by update->crtc_timing_adjust. We should set update->crtc_timing_adjust->timing_adjust_pending and then overwrite stream->adjust. Reset update->crtc_timing_adjust->timing_adjust_pending after the assignment. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Zhongwei Zhang <Zhongwei.Zhang@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: calculate the remain segments for all pipesZhikai Zhai
[WHY] In some cases the remain de-tile buffer segments will be greater than zero if we don't add the non-top pipe to calculate, at this time the override de-tile buffer size will be valid and used. But it makes the de-tile buffer segments used finally for all of pipes exceed the maximum. [HOW] Add the non-top pipe to calculate the remain de-tile buffer segments. Don't set override size to use the average according to pipe count if the value exceed the maximum. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Fix visual confirm color not updatingLeo Zeng
[WHY] Sometimes visual confirm color is updated, but the background color is not changed. This causes visual confrim to show incorrect colors. [HOW] Update background color when visual confirm color changes. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Leo Zeng <Leo.Zeng@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Assign normalized_pix_clk when color depth = 14Alex Hung
[WHY & HOW] A warning message "WARNING: CPU: 4 PID: 459 at ... /dc_resource.c:3397 calculate_phy_pix_clks+0xef/0x100 [amdgpu]" occurs because the display_color_depth == COLOR_DEPTH_141414 is not handled. This is observed in Radeon RX 6600 XT. It is fixed by assigning pix_clk * (14 * 3) / 24 - same as the rests. Also fixes the indentation in get_norm_pix_clk. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Add Support for reg inbox0 for host->DMUB CMDsDillon Varone
[WHY] DCN4+ supports a new register based mailbox for sending messages from host to DMCUB. This mailbox supports 64 byte commands, which makes it compatible with the same structure as the frame buffer based mailbox. [HOW] The intention for reg_inbox0 is to be slot in replacement for the frame buffer based mailbox (Inbox1). It supports all of the required features: - Supports all messages handled by FB Inbox1 - Supports multi command batching Reviewed-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: assume VBIOS supports DSC as defaultCharlene Liu
[Why & How] The clear_dsc_setting at boot logic was based on dcn version check. As such new ASIC lost this DSC clear up logic, change the assumption to BIOS support eDP DSC for new ASIC. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Implement PCON regulated autonomous mode handlingGeorge Shen
[Why/How] DP spec has been updated recently to make regulated autonomous mode more well-defined. In case any PCON vendors choose to implement regulated autonomous mode in the future, pre-emptively add handling for the regulated autonomous mode based on current spec. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: not abort link train when bw is lowPeichen Huang
[WHY] DP tunneling should not abort link train even bandwidth become too low after downgrade. Otherwise, it would fail compliance test. [HOW} Do link train with downgrade settings even bandwidth is not enough Reviewed-by: Cruise Hung <cruise.hung@amd.com> Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Do not enable replay when vtotal update is pending.Danny Wang
[Why&How] Vtotal is not applied to HW when handling vsync interrupt. Make sure vtotal is aligned before enable replay. Reviewed-by: Anthony Koo <anthony.koo@amd.com> Reviewed-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Danny Wang <danny.wang@amd.com> Signed-off-by: Zhongwei Zhang <Zhongwei.Zhang@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Add and use new dm_prepare_suspend() callbackMario Limonciello
[Why] The displays currently don't get turned off until after other IP blocks have been suspended. However turning off the displays first gives a very visible response that the system is on it's way down. [How] Turn off displays in a prepare_suspend() callback instead when possible. This will help for suspend and hibernate sequences. The shutdown sequence however will not call prepare() so check whether the state has been already saved to decide what to do. Acked-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Restore correct backlight brightness after a GPU resetMario Limonciello
[Why] GPU reset will attempt to restore cached state, but brightness doesn't get restored. It will come back at 100% brightness, but userspace thinks it's the previous value. [How] When running resume sequence if GPU is in reset restore brightness to previous value. Acked-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: fix default brightnessMario Limonciello
[Why] To avoid flickering during boot default brightness level set by BIOS should be maintained for as much of the boot as feasible. commit 2fe87f54abdc ("drm/amd/display: Set default brightness according to ACPI") attempted to set the right levels for AC vs DC, but brightness still got reset to maximum level in initialization code for setup_backlight_device(). [How] Remove the hardcoded initialization in setup_backlight_device() and instead program brightness value to match BIOS (AC or DC). This avoids a brightness flicker from kernel changing the value. Userspace may however still change it during boot. Fixes: 2fe87f54abdc ("drm/amd/display: Set default brightness according to ACPI") Acked-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: Add more debug data to dmub_srvJoshua Aberback
[Why] When analyzing some crash dumps, not all of the expected DMUB info was available, so we want to add in-object storage for this data. [How] - dmub_srv_debug (renamed to dmub_timeout_info) is already a member of dmub_diagnostic_data, therefore keep a dmub_diagnostic_data directly in dmub_srv - use dmub_srv->debug when collecting diagnostic info instead of stack object to allow for easy inspection in crash dumps Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-12 20:54:57 +0000