| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix a performance regression on AMD iGPU and dGPU drivers, related to
the unintended activation of DMA bounce buffers that regressed game
performance if KASLR disturbed things just enough
- Fix a copy_user_generic() performance regression on certain older
non-FSRM/ERMS CPUs
- Fix a Clang build warning due to a semantic merge conflict the Kunit
tree generated with the x86 tree
- Fix FRED related system hang during S4 resume
- Remove an unused API
* tag 'x86-urgent-2025-04-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fred: Fix system hang during S4 resume with FRED enabled
x86/platform/iosf_mbi: Remove unused iosf_mbi_unregister_pmic_bus_access_notifier()
x86/mm/init: Handle the special case of device private pages in add_pages(), to not increase max_pfn and trigger dma_addressing_limited() bounce buffers
x86/tools: Drop duplicate unlikely() definition in insn_decoder_test.c
x86/uaccess: Improve performance by aligning writes to 8 bytes in copy_user_generic(), on non-FSRM/ERMS CPUs
|
|
The rz-du driver uses GEM DMA helpers, but does not implement the
drm_driver .gem_prime_import_sg_table operation. This prevents
importing dmabufs. Fix it by implementing the missing operation using
the DRM_GEM_DMA_DRIVER_OPS_WITH_DUMB_CREATE() helper macro.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> # RZ/V2H + DSI
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250321104615.31809-1-laurent.pinchart+renesas@ideasonboard.com
|
|
Add Kconfig dependency between RZG2L_DU and RZG2L_MIPI_DSI, so that
DSI module has functional dependency on DU. It is similar way that
the R-Car MIPI DSI encoder is handled.
While at it drop ARCH_RENESAS dependency as DRM_RZG2L_DU depend on
ARCH_RZG2L.
Suggested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240827163727.108405-1-biju.das.jz@bp.renesas.com
|
|
We switched to use refcount_t for vmaps and missed to change the vunmap
code to properly unset the vmap pointer, which is now cleared while vmap's
refcount > 0. Clear the cached vmap pointer only when refcounting drops to
zero to fix the bug.
Fixes: e1fc39a92332 ("drm/shmem-helper: Use refcount_t for vmap_use_count")
Reported-by: Lucas De Marchi <lucas.demarchi@intel.com>
Closes: https://lore.kernel.org/dri-devel/20250403105053.788b0f6e@collabora.com/T/#m3dca6d81bedc8d6146a56b82694624fbc6fa4c96
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Tested-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250403142633.484660-1-dmitry.osipenko@collabora.com
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the `DEFINE_RAW_FLEX()` helper for an on-stack definition of
a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.
So, with these changes, fix the following warning:
drivers/gpu/drm/nouveau/dispnv50/disp.c:779:47: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/Z-2zI55Qf88jTfNK@kspp
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the `DEFINE_RAW_FLEX()` helper for an on-stack definition of
a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.
So, with these changes, fix the following warning:
drivers/gpu/drm/nouveau/nouveau_svm.c:724:44: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/Z-2uezeHt1aaHH6x@kspp
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the `DEFINE_RAW_FLEX()` helper for an on-stack definition of
a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.
So, with these changes, fix the following warning:
drivers/gpu/drm/nouveau/nouveau_fence.c:188:38: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/Z-2r6v-Cji7vwOsz@kspp
|
|
Fix below inconsistent indenting smatch warning.
smatch warnings:
drivers/gpu/drm/sti/sti_hda.c:696 sti_hda_bind() warn: inconsistent indenting
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Acked-by: Raphaël Gallais-Pou <rgallaispou@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250305101641.2399-1-hanchunchao@inspur.com
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
|
|
branch devices
drm_dp_dpcd_write_data() can be used to write the GUID for a non-root
MST branch device, similarly to writing the GUID to a root MST branch
device, do so.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250401103846.686408-2-imre.deak@intel.com
|
|
The return value on success of drm_dp_send_dpcd_write() called for
non-root MST branch devices from drm_dp_check_mstb_guid() is the number
of bytes transferred. Atm this return value (in case of a complete read)
will be regarded incorrectly as an error by the caller of
drm_dp_check_mstb_guid(). Fix this by converting the return value for a
complete read to the expected success code (0) and for a partial read to
a failure code (-EPROTO).
Fixes: 2554da0de3e8 ("drm/display: dp-mst-topology: use new DCPD access helpers")
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250401103846.686408-1-imre.deak@intel.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.15-2025-03-27:
amdgpu:
- Guard against potential division by 0 in fan code
- Zero RPM support for SMU 14.0.2
- Properly handle SI and CIK support being disabled
- PSR fixes
- DML2 fixes
- DP Link training fix
- Vblank fixes
- RAS fixes
- Partitioning fix
- SDMA fix
- SMU 13.0.x fixes
- Rom fetching fix
- MES fixes
- Queue reset fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250328004749.3392457-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Driver Changes:
- Fix NULL pointer dereference on error path
- Add missing HW workaround for BMG
- Fix survivability mode not triggering
- Fix build warning when DRM_FBDEV_EMULATION is not set
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/vxy5kwdkzgp2u2umnyxv4ygslmdlvzjl22xotzxaw55dv7plpz@34miqxkbvggu
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
drm/i915 fixes for v6.15 merge window:
- Bounds check for scalers in DSC prefill latency computation
- Fix build by adding a missing include
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/878qota36x.fsf@intel.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
Short summary of fixes pull:
adp:
- Fix error handling in plane setup
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250327141835.GA96037@linux.fritz.box
|
|
A negative resolution doesn't really make any sense, so let's make these
parameters unsigned. In C this doesn't make much of a difference, but Rust
is stricter about signed/unsigned casts and additionally can check for
arithmetic over/underflows if CONFIG_RUST_OVERFLOW_CHECKS is enabled.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250331222556.454334-2-lyude@redhat.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Ingo Molnar:
"These are objtool fixes and updates by Josh Poimboeuf, centered around
the fallout from the new CONFIG_OBJTOOL_WERROR=y feature, which,
despite its default-off nature, increased the profile/impact of
objtool warnings:
- Improve error handling and the presentation of warnings/errors
- Revert the new summary warning line that some test-bot tools
interpreted as new regressions
- Fix a number of objtool warnings in various drivers, core kernel
code and architecture code. About half of them are potential
problems related to out-of-bounds accesses or potential undefined
behavior, the other half are additional objtool annotations
- Update objtool to latest (known) compiler quirks and objtool bugs
triggered by compiler code generation
- Misc fixes"
* tag 'objtool-urgent-2025-04-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
objtool/loongarch: Add unwind hints in prepare_frametrace()
rcu-tasks: Always inline rcu_irq_work_resched()
context_tracking: Always inline ct_{nmi,irq}_{enter,exit}()
sched/smt: Always inline sched_smt_active()
objtool: Fix verbose disassembly if CROSS_COMPILE isn't set
objtool: Change "warning:" to "error: " for fatal errors
objtool: Always fail on fatal errors
Revert "objtool: Increase per-function WARN_FUNC() rate limit"
objtool: Append "()" to function name in "unexpected end of section" warning
objtool: Ignore end-of-section jumps for KCOV/GCOV
objtool: Silence more KCOV warnings, part 2
objtool, drm/vmwgfx: Don't ignore vmw_send_msg() for ORC
objtool: Fix STACK_FRAME_NON_STANDARD for cold subfunctions
objtool: Fix segfault in ignore_unreachable_insn()
objtool: Fix NULL printf() '%s' argument in builtin-check.c:save_argv()
objtool, lkdtm: Obfuscate the do_nothing() pointer
objtool, regulator: rk808: Remove potential undefined behavior in rk806_set_mode_dcdc()
objtool, ASoC: codecs: wcd934x: Remove potential undefined behavior in wcd934x_slim_irq_handler()
objtool, Input: cyapa - Remove undefined behavior in cyapa_update_fw_store()
objtool, panic: Disable SMAP in __stack_chk_fail()
...
|
|
Use the common dp link power up/down helpers to avoid duplicating code.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250318063452.4983-5-andyshrk@163.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Use the common dp link power up/down helpers to avoid duplicating code.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250318063452.4983-4-andyshrk@163.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Use the common dp link power up/down helpers to avoid duplicating code.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250318063452.4983-3-andyshrk@163.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Use the common dp link power up/down helpers to avoid duplicating code.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250318063452.4983-2-andyshrk@163.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
The helper functions drm_dp_link_power_up/down were moved to Tegra
DRM in commit 9a42c7c647a9 ("drm/tegra: Move drm_dp_link helpers to Tegra DRM")".
Now since more and more users are duplicating the same code in their
own drivers, it's time to make them as DRM DP common helpers again.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250318063452.4983-1-andyshrk@163.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
iosf_mbi_unregister_pmic_bus_access_notifier()
The last use of iosf_mbi_unregister_pmic_bus_access_notifier() was
removed in 2017 by:
a5266db4d314 ("drm/i915: Acquire PUNIT->PMIC bus for intel_uncore_forcewake_reset()")
Remove it.
(Note that the '_unlocked' version is still used.)
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Link: https://lore.kernel.org/r/20241225175010.91783-1-linux@treblig.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updatesk from Greg KH:
"Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in
6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates"
* tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (52 commits)
rust: platform: require Send for Driver trait implementers
rust: pci: require Send for Driver trait implementers
rust: platform: impl Send + Sync for platform::Device
rust: pci: impl Send + Sync for pci::Device
rust: platform: fix unrestricted &mut platform::Device
rust: pci: fix unrestricted &mut pci::Device
rust: device: implement device context marker
rust: pci: use to_result() in enable_device_mem()
MAINTAINERS: driver core: mark Rafael and Danilo as co-maintainers
rust/kernel/faux: mark Registration methods inline
driver core: faux: only create the device if probe() succeeds
rust/faux: Add missing parent argument to Registration::new()
rust/faux: Drop #[repr(transparent)] from faux::Registration
rust: io: fix devres test with new io accessor functions
rust: io: rename `io::Io` accessors
kernfs: Move dput() outside of the RCU section.
efi: rci2: mark bin_attribute as __ro_after_init
rapidio: constify 'struct bin_attribute'
firmware: qemu_fw_cfg: constify 'struct bin_attribute'
powerpc/perf/hv-24x7: Constify 'struct bin_attribute'
...
|
|
Add support for exporting a dma_fence fd for a specific point on a
timeline. This is needed for vtest/vpipe[1][2] to implement timeline
syncobj support, as it needs a way to turn a point on a timeline back
into a dma_fence fd. It also closes an odd omission from the syncobj
UAPI.
[1] https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33433
[2] https://gitlab.freedesktop.org/virgl/virglrenderer/-/merge_requests/805
v2: Add DRM_SYNCOBJ_HANDLE_TO_FD_FLAGS_TIMELINE
v3: Add unstaged uabi header hunk
v4: Also handle IMPORT_SYNC_FILE case
v5: Address comments from Dmitry
v6: checkpatch.pl nits
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250401155758.48855-1-robdclark@gmail.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- The series "Enable strict percpu address space checks" from Uros
Bizjak uses x86 named address space qualifiers to provide
compile-time checking of percpu area accesses.
This has caused a small amount of fallout - two or three issues were
reported. In all cases the calling code was found to be incorrect.
- The series "Some cleanup for memcg" from Chen Ridong implements some
relatively monir cleanups for the memcontrol code.
- The series "mm: fixes for device-exclusive entries (hmm)" from David
Hildenbrand fixes a boatload of issues which David found then using
device-exclusive PTE entries when THP is enabled. More work is
needed, but this makes thins better - our own HMM selftests now
succeed.
- The series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed
remove the z3fold and zbud implementations. They have been deprecated
for half a year and nobody has complained.
- The series "mm: further simplify VMA merge operation" from Lorenzo
Stoakes implements numerous simplifications in this area. No runtime
effects are anticipated.
- The series "mm/madvise: remove redundant mmap_lock operations from
process_madvise()" from SeongJae Park rationalizes the locking in the
madvise() implementation. Performance gains of 20-25% were observed
in one MADV_DONTNEED microbenchmark.
- The series "Tiny cleanup and improvements about SWAP code" from
Baoquan He contains a number of touchups to issues which Baoquan
noticed when working on the swap code.
- The series "mm: kmemleak: Usability improvements" from Catalin
Marinas implements a couple of improvements to the kmemleak
user-visible output.
- The series "mm/damon/paddr: fix large folios access and schemes
handling" from Usama Arif provides a couple of fixes for DAMON's
handling of large folios.
- The series "mm/damon/core: fix wrong and/or useless damos_walk()
behaviors" from SeongJae Park fixes a few issues with the accuracy of
kdamond's walking of DAMON regions.
- The series "expose mapping wrprotect, fix fb_defio use" from Lorenzo
Stoakes changes the interaction between framebuffer deferred-io and
core MM. No functional changes are anticipated - this is preparatory
work for the future removal of page structure fields.
- The series "mm/damon: add support for hugepage_size DAMOS filter"
from Usama Arif adds a DAMOS filter which permits the filtering by
huge page sizes.
- The series "mm: permit guard regions for file-backed/shmem mappings"
from Lorenzo Stoakes extends the guard region feature from its
present "anon mappings only" state. The feature now covers shmem and
file-backed mappings.
- The series "mm: batched unmap lazyfree large folios during
reclamation" from Barry Song cleans up and speeds up the unmapping
for pte-mapped large folios.
- The series "reimplement per-vma lock as a refcount" from Suren
Baghdasaryan puts the vm_lock back into the vma. Our reasons for
pulling it out were largely bogus and that change made the code more
messy. This patchset provides small (0-10%) improvements on one
microbenchmark.
- The series "Docs/mm/damon: misc DAMOS filters documentation fixes and
improves" from SeongJae Park does some maintenance work on the DAMON
docs.
- The series "hugetlb/CMA improvements for large systems" from Frank
van der Linden addresses a pile of issues which have been observed
when using CMA on large machines.
- The series "mm/damon: introduce DAMOS filter type for unmapped pages"
from SeongJae Park enables users of DMAON/DAMOS to filter my the
page's mapped/unmapped status.
- The series "zsmalloc/zram: there be preemption" from Sergey
Senozhatsky teaches zram to run its compression and decompression
operations preemptibly.
- The series "selftests/mm: Some cleanups from trying to run them" from
Brendan Jackman fixes a pile of unrelated issues which Brendan
encountered while runnimg our selftests.
- The series "fs/proc/task_mmu: add guard region bit to pagemap" from
Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to
determine whether a particular page is a guard page.
- The series "mm, swap: remove swap slot cache" from Kairui Song
removes the swap slot cache from the allocation path - it simply
wasn't being effective.
- The series "mm: cleanups for device-exclusive entries (hmm)" from
David Hildenbrand implements a number of unrelated cleanups in this
code.
- The series "mm: Rework generic PTDUMP configs" from Anshuman Khandual
implements a number of preparatoty cleanups to the GENERIC_PTDUMP
Kconfig logic.
- The series "mm/damon: auto-tune aggregation interval" from SeongJae
Park implements a feedback-driven automatic tuning feature for
DAMON's aggregation interval tuning.
- The series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in
powerpc, sparc and x86 lazy MMU implementations. Ryan did this in
preparation for implementing lazy mmu mode for arm64 to optimize
vmalloc.
- The series "mm/page_alloc: Some clarifications for migratetype
fallback" from Brendan Jackman reworks some commentary to make the
code easier to follow.
- The series "page_counter cleanup and size reduction" from Shakeel
Butt cleans up the page_counter code and fixes a size increase which
we accidentally added late last year.
- The series "Add a command line option that enables control of how
many threads should be used to allocate huge pages" from Thomas
Prescher does that. It allows the careful operator to significantly
reduce boot time by tuning the parallalization of huge page
initialization.
- The series "Fix calculations in trace_balance_dirty_pages() for cgwb"
from Tang Yizhou fixes the tracing output from the dirty page
balancing code.
- The series "mm/damon: make allow filters after reject filters useful
and intuitive" from SeongJae Park improves the handling of allow and
reject filters. Behaviour is made more consistent and the documention
is updated accordingly.
- The series "Switch zswap to object read/write APIs" from Yosry Ahmed
updates zswap to the new object read/write APIs and thus permits the
removal of some legacy code from zpool and zsmalloc.
- The series "Some trivial cleanups for shmem" from Baolin Wang does as
it claims.
- The series "fs/dax: Fix ZONE_DEVICE page reference counts" from
Alistair Popple regularizes the weird ZONE_DEVICE page refcount
handling in DAX, permittig the removal of a number of special-case
checks.
- The series "refactor mremap and fix bug" from Lorenzo Stoakes is a
preparatoty refactoring and cleanup of the mremap() code.
- The series "mm: MM owner tracking for large folios (!hugetlb) +
CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in
which we determine whether a large folio is known to be mapped
exclusively into a single MM.
- The series "mm/damon: add sysfs dirs for managing DAMOS filters based
on handling layers" from SeongJae Park adds a couple of new sysfs
directories to ease the management of DAMON/DAMOS filters.
- The series "arch, mm: reduce code duplication in mem_init()" from
Mike Rapoport consolidates many per-arch implementations of
mem_init() into code generic code, where that is practical.
- The series "mm/damon/sysfs: commit parameters online via
damon_call()" from SeongJae Park continues the cleaning up of sysfs
access to DAMON internal data.
- The series "mm: page_ext: Introduce new iteration API" from Luiz
Capitulino reworks the page_ext initialization to fix a boot-time
crash which was observed with an unusual combination of compile and
cmdline options.
- The series "Buddy allocator like (or non-uniform) folio split" from
Zi Yan reworks the code to split a folio into smaller folios. The
main benefit is lessened memory consumption: fewer post-split folios
are generated.
- The series "Minimize xa_node allocation during xarry split" from Zi
Yan reduces the number of xarray xa_nodes which are generated during
an xarray split.
- The series "drivers/base/memory: Two cleanups" from Gavin Shan
performs some maintenance work on the drivers/base/memory code.
- The series "Add tracepoints for lowmem reserves, watermarks and
totalreserve_pages" from Martin Liu adds some more tracepoints to the
page allocator code.
- The series "mm/madvise: cleanup requests validations and
classifications" from SeongJae Park cleans up some warts which
SeongJae observed during his earlier madvise work.
- The series "mm/hwpoison: Fix regressions in memory failure handling"
from Shuai Xue addresses two quite serious regressions which Shuai
has observed in the memory-failure implementation.
- The series "mm: reliable huge page allocator" from Johannes Weiner
makes huge page allocations cheaper and more reliable by reducing
fragmentation.
- The series "Minor memcg cleanups & prep for memdescs" from Matthew
Wilcox is preparatory work for the future implementation of memdescs.
- The series "track memory used by balloon drivers" from Nico Pache
introduces a way to track memory used by our various balloon drivers.
- The series "mm/damon: introduce DAMOS filter type for active pages"
from Nhat Pham permits users to filter for active/inactive pages,
separately for file and anon pages.
- The series "Adding Proactive Memory Reclaim Statistics" from Hao Jia
separates the proactive reclaim statistics from the direct reclaim
statistics.
- The series "mm/vmscan: don't try to reclaim hwpoison folio" from
Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim
code.
* tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (431 commits)
mm/page_alloc: remove unnecessary __maybe_unused in order_to_pindex()
x86/mm: restore early initialization of high_memory for 32-bits
mm/vmscan: don't try to reclaim hwpoison folio
mm/hwpoison: introduce folio_contain_hwpoisoned_page() helper
cgroup: docs: add pswpin and pswpout items in cgroup v2 doc
mm: vmscan: split proactive reclaim statistics from direct reclaim statistics
selftests/mm: speed up split_huge_page_test
selftests/mm: uffd-unit-tests support for hugepages > 2M
docs/mm/damon/design: document active DAMOS filter type
mm/damon: implement a new DAMOS filter type for active pages
fs/dax: don't disassociate zero page entries
MM documentation: add "Unaccepted" meminfo entry
selftests/mm: add commentary about 9pfs bugs
fork: use __vmalloc_node() for stack allocation
docs/mm: Physical Memory: Populate the "Zones" section
xen: balloon: update the NR_BALLOON_PAGES state
hv_balloon: update the NR_BALLOON_PAGES state
balloon_compaction: update the NR_BALLOON_PAGES state
meminfo: add a per node counter for balloon drivers
mm: remove references to folio in __memcg_kmem_uncharge_page()
...
|
|
Start using the new helper that does the refcounted
allocations.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Anusha Srivatsa <asrivats@redhat.com>
Link: https://lore.kernel.org/r/20250331-b4-panel-refcounting-v4-4-dad50c60c6c9@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Start moving to the new refcounted allocations using
the new API devm_drm_panel_alloc(). Deprecate any other
allocation.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Anusha Srivatsa <asrivats@redhat.com>
Link: https://lore.kernel.org/r/20250331-b4-panel-refcounting-v4-3-dad50c60c6c9@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Allocate panel via reference counting. Add _get() and _put() helper
functions to ensure panel allocations are refcounted. Avoid use after
free by ensuring panel pointer is valid and can be usable till the last
reference is put.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Anusha Srivatsa <asrivats@redhat.com>
Link: https://lore.kernel.org/r/20250331-b4-panel-refcounting-v4-2-dad50c60c6c9@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Introduce reference counted allocations for panels to avoid
use-after-free. The patch adds the macro devm_drm_bridge_alloc()
to allocate a new refcounted panel. Followed the documentation for
drmm_encoder_alloc() and devm_drm_dev_alloc and other similar
implementations for this purpose.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Anusha Srivatsa <asrivats@redhat.com>
Link: https://lore.kernel.org/r/20250331-b4-panel-refcounting-v4-1-dad50c60c6c9@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
For ease of implementation, existing line-conversion functions
for 8-bit formats write each pixel individually. Optimize the
performance by writing multiple pixels in a single 32-bit store.
v2:
- simplify address calculation (Jani)
- fix typo in commit message (Jocelyn)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250328141709.217283-9-tzimmermann@suse.de
|
|
For ease of implementation, existing line-conversion functions
for 16-bit formats write each pixel individually. Optimize the
performance by writing multiple pixels in single 64-bit and 32-bit
stores.
v2:
- simplify address calculation (Jani)
- fix typo in commit message (Jocelyn)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250328141709.217283-8-tzimmermann@suse.de
|
|
For ease of implementation, existing line-conversion functions
for 24-bit formats write each byte individually. Optimize the
performance by writing 4 pixels in 3 32-bit stores.
v2:
- simplify address calculation (Jani)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250328141709.217283-7-tzimmermann@suse.de
|
|
Add drm_fb_xfrm_line_32to8() to implement conversion from 32-bit
pixels to 8-bit pixels. The pixel-conversion is specified by the
given callback parameter. Mark the helper as always_inline to avoid
overhead from function calls.
Then implement all existing line-conversion functions with the new
generic call and the respective pixel-conversion helper.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250328141709.217283-6-tzimmermann@suse.de
|
|
Add drm_fb_xfrm_line_32to16() to implement conversion from 32-bit
pixels to 16-bit pixels. The pixel-conversion is specified by the
given callback parameter. Mark the helper as always_inline to avoid
overhead from function calls.
Then implement all existing line-conversion functions with the new
generic call and the respective pixel-conversion helper. There's one
pixel-conversion helper that swaps output bytes. It is for gud and
requires refactoring, so don't move it into the header file.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250328141709.217283-5-tzimmermann@suse.de
|
|
Add drm_fb_xfrm_line_32to24() to implement conversion from 32-bit
pixels to 24-bit pixels. The pixel-conversion is specified by the
given callback parameter. Mark the helper as always_inline to avoid
overhead from function calls.
Then implement all existing line-conversion functions with the new
generic call and the respective pixel-conversion helper.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250328141709.217283-4-tzimmermann@suse.de
|
|
Add drm_fb_xfrm_line_32to32() to implement conversion from 32-bit
pixels to 32-bit pixels. The pixel-conversion is specified by the
given callback parameter. Mark the helper as always_inline to avoid
overhead from function calls.
Then implement all existing line-conversion functions with the new
generic call and the respective pixel-conversion helper.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250328141709.217283-3-tzimmermann@suse.de
|
|
The DRM draw helpers contain format-conversion helpers that operate
on individual pixels. Move them into an internal header file and adopt
them as individual API. Update the draw code accordingly. The pixel
helpers will also be useful for other format conversion helpers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250328141709.217283-2-tzimmermann@suse.de
|
|
Remove struct cirrus_primary_plane_state and its helpers, which
are all unused. Use struct drm_shadow_plane_state instead.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://lore.kernel.org/r/20250328091821.195061-5-tzimmermann@suse.de
|
|
Remove internal adjustments to framebuffer format from cirrus-qemu
driver. The driver did this to support higher resolutions by reducing
the per-pixel memory consumption. DRM has a policy of exporting formats
as they are implemented in hardware. So avoid internal adjustments if
possible.
Also remove the call to drm_fb_blit() from cirrus-qemu. The helper
is useful if source and destination format are not known beforehand.
This is not the case for cirrus-qemu.
This change effectively reduces the maximum available resolution to
800x600 at 32 bpp. A maximum scanline pitch of 4095 byte prevents
1024 pixels per scanline at 32 bpp. Higher resolutions are possible
at lower bit depths, but are currently not supported by userspace.
When cirrus-qemu currently reduced the internal bit depth to support
higher resolutions, it trades resolution for bit depth and CPU time.
Converting from 32-bit colors has a significant runtime overhead, as
outlined at [1]. Avoiding color-format adjustments also avoids this
tradeoff.
v2:
- expand commit message (Gerd)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://lore.kernel.org/dri-devel/20250325110407.81107-1-tzimmermann@suse.de/ # 1
Link: https://lore.kernel.org/r/20250328091821.195061-4-tzimmermann@suse.de
|
|
Implement strict checking of a display mode's minimum scanline
pitch in cirrus_mode_config_mode_valid(). Sort out all modes that
possibly overflow the maximum pitch.
The current validation only tests against a display mode's minimum
requirements for video memory. Only atomic_check later tests against
the pitch limit before programming the framebuffer.
The problem is that user-space compositors do not handle this
gracefully. If atomic_check fails to validate the scanline pitch
and returns an error, the compositor, namely Weston, does nothing
and the display remains stale.
Ruling out display modes that possibly overflow the pitch avoids
this problem. With only 4 MiB of video memory available, this
effectively limits horizontal resolution to 800 pixels. But with
cirrus-qemu being low-end and obsolete, this is probably not an
issue in practice. Better alternatives are available in qemu.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://lore.kernel.org/r/20250328091821.195061-3-tzimmermann@suse.de
|
|
Do not set CR1B[6] when programming the pitch. The bit effects VGA
text mode and is not interpreted by qemu. [1] It has no affect on
the scanline pitch.
The scanline bit that is set into CR1B[6] belongs into CR13[7], which
the driver sets up correctly.
This bug goes back to the driver's initial commit.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://gitlab.com/qemu-project/qemu/-/blob/stable-9.2/hw/display/cirrus_vga.c?ref_type=heads#L1112 # 1
Fixes: f9aa76a85248 ("drm/kms: driver for virtual cirrus under qemu")
Cc: Adam Jackson <ajax@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: <stable@vger.kernel.org> # v3.5+
Link: https://lore.kernel.org/r/20250328091821.195061-2-tzimmermann@suse.de
|
|
MediaTek MT8192 SoC has an ARM Mali-G57 MC5 GPU (Valhall-JM). Now that
Panfrost supports AARCH64_4K page table format, let's enable it on this
SoC.
Running glmark2-es2-drm [0] benchmark, reported the same performance
score on both modes Mali LPAE (LEGACY) vs. AARCH64_4K, before and after
this commit. Tested on a Mediatek (MT8395) Genio 1200 EVK board.
[0] https://github.com/glmark2/glmark2
Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250324185801.168664-7-ariel.dalessandro@collabora.com
|
|
MediaTek MT8188 SoC has an ARM Mali-G57 MC3 GPU (Valhall-JM), which
constantly faults with the current panfrost support.
For instance, running `glmark2-es2-drm` benchmark test:
```
[ 79.617461] panfrost 13000000.gpu: js fault, js=1, status=JOB_BUS_FAULT, head=0xaadc380, tail=0xaadc380
[ 80.119811] panfrost 13000000.gpu: gpu sched timeout, js=0, config=0x7300, status=0x58, head=0xaaca180, tail=0xaaca180, sched_job=000000002fd03ccc
[ 80.129083] panfrost 13000000.gpu: Unhandled Page fault in AS0 at VA 0x0000000000000000
[ 80.129083] Reason: TODO
[ 80.129083] raw fault status: 0x1C2
[ 80.129083] decoded fault status: SLAVE FAULT
[ 80.129083] exception type 0xC2: TRANSLATION_FAULT_2
[ 80.129083] access type 0x1: EXECUTE
[ 80.129083] source id 0x0
```
Note that current panfrost mode (Mali LPAE - LEGACY) only allows to
specify write-cache or implementation-defined as the caching policy,
probably not matching the right configuration. As depicted in the source
code:
drivers/iommu/io-pgtable-arm.c:
```
* MEMATTR: Mali has no actual notion of a non-cacheable type, so the
* best we can do is mimic the out-of-tree driver and hope that the
* "implementation-defined caching policy" is good enough...
```
Now that Panfrost supports AARCH64_4K page table format, let's enable it
on Mediatek MT8188 and configure the cache/shareability policies
properly.
Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250324185801.168664-6-ariel.dalessandro@collabora.com
|
|
Currently, Panfrost only supports MMU configuration in "LEGACY" (as
Bifrost calls it) mode, a (modified) version of LPAE "Large Physical
Address Extension", which in Linux we've called "mali_lpae".
This commit adds support for conditionally enabling AARCH64_4K page
table format. To achieve that, a "GPU optional quirks" field was added
to `struct panfrost_features` with the related flag.
Note that, in order to enable AARCH64_4K mode, the GPU variant must have
the HW_FEATURE_AARCH64_MMU feature flag present.
Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250324185801.168664-5-ariel.dalessandro@collabora.com
|
|
Set this feature flag on all Mali Bifrost platforms as the MMU supports
AARCH64 4K page table format.
Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250324185801.168664-4-ariel.dalessandro@collabora.com
|
|
As done in panthor, define and use these GPU_MMU_FEATURES_* macros,
which makes code easier to read and reuse.
Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250324185801.168664-3-ariel.dalessandro@collabora.com
|
|
Panfrost does not support uncached mappings, so flag them properly. Also
flag the pages that are mapped as response to a page fault as cached.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250324185801.168664-2-ariel.dalessandro@collabora.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Extract the 'pin-init' API from the 'kernel' crate and make it into
a standalone crate.
In order to do this, the contents are rearranged so that they can
easily be kept in sync with the version maintained out-of-tree that
other projects have started to use too (or plan to, like QEMU).
This will reduce the maintenance burden for Benno, who will now
have his own sub-tree, and will simplify future expected changes
like the move to use 'syn' to simplify the implementation.
- Add '#[test]'-like support based on KUnit.
We already had doctests support based on KUnit, which takes the
examples in our Rust documentation and runs them under KUnit.
Now, we are adding the beginning of the support for "normal" tests,
similar to those the '#[test]' tests in userspace Rust. For
instance:
#[kunit_tests(my_suite)]
mod tests {
#[test]
fn my_test() {
assert_eq!(1 + 1, 2);
}
}
Unlike with doctests, the 'assert*!'s do not map to the KUnit
assertion APIs yet.
- Check Rust signatures at compile time for functions called from C
by name.
In particular, introduce a new '#[export]' macro that can be placed
in the Rust function definition. It will ensure that the function
declaration on the C side matches the signature on the Rust
function:
#[export]
pub unsafe extern "C" fn my_function(a: u8, b: i32) -> usize {
// ...
}
The macro essentially forces the compiler to compare the types of
the actual Rust function and the 'bindgen'-processed C signature.
These cases are rare so far. In the future, we may consider
introducing another tool, 'cbindgen', to generate C headers
automatically. Even then, having these functions explicitly marked
may be a good idea anyway.
- Enable the 'raw_ref_op' Rust feature: it is already stable, and
allows us to use the new '&raw' syntax, avoiding a couple macros.
After everyone has migrated, we will disallow the macros.
- Pass the correct target to 'bindgen' on Usermode Linux.
- Fix 'rusttest' build in macOS.
'kernel' crate:
- New 'hrtimer' module: add support for setting up intrusive timers
without allocating when starting the timer. Add support for
'Pin<Box<_>>', 'Arc<_>', 'Pin<&_>' and 'Pin<&mut _>' as pointer
types for use with timer callbacks. Add support for setting clock
source and timer mode.
- New 'dma' module: add a simple DMA coherent allocator abstraction
and a test sample driver.
- 'list' module: make the linked list 'Cursor' point between
elements, rather than at an element, which is more convenient to us
and allows for cursors to empty lists; and document it with
examples of how to perform common operations with the provided
methods.
- 'str' module: implement a few traits for 'BStr' as well as the
'strip_prefix()' method.
- 'sync' module: add 'Arc::as_ptr'.
- 'alloc' module: add 'Box::into_pin'.
- 'error' module: extend the 'Result' documentation, including a few
examples on different ways of handling errors, a warning about
using methods that may panic, and links to external documentation.
'macros' crate:
- 'module' macro: add the 'authors' key to support multiple authors.
The original key will be kept until everyone has migrated.
Documentation:
- Add error handling sections.
MAINTAINERS:
- Add Danilo Krummrich as reviewer of the Rust "subsystem".
- Add 'RUST [PIN-INIT]' entry with Benno Lossin as maintainer. It has
its own sub-tree.
- Add sub-tree for 'RUST [ALLOC]'.
- Add 'DMA MAPPING HELPERS DEVICE DRIVER API [RUST]' entry with
Abdiel Janulgue as primary maintainer. It will go through the
sub-tree of the 'RUST [ALLOC]' entry.
- Add 'HIGH-RESOLUTION TIMERS [RUST]' entry with Andreas Hindborg as
maintainer. It has its own sub-tree.
And a few other cleanups and improvements"
* tag 'rust-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (71 commits)
rust: dma: add `Send` implementation for `CoherentAllocation`
rust: macros: fix `make rusttest` build on macOS
rust: block: refactor to use `&raw mut`
rust: enable `raw_ref_op` feature
rust: uaccess: name the correct function
rust: rbtree: fix comments referring to Box instead of KBox
rust: hrtimer: add maintainer entry
rust: hrtimer: add clocksource selection through `ClockId`
rust: hrtimer: add `HrTimerMode`
rust: hrtimer: implement `HrTimerPointer` for `Pin<Box<T>>`
rust: alloc: add `Box::into_pin`
rust: hrtimer: implement `UnsafeHrTimerPointer` for `Pin<&mut T>`
rust: hrtimer: implement `UnsafeHrTimerPointer` for `Pin<&T>`
rust: hrtimer: add `hrtimer::ScopedHrTimerPointer`
rust: hrtimer: add `UnsafeHrTimerPointer`
rust: hrtimer: allow timer restart from timer handler
rust: str: implement `strip_prefix` for `BStr`
rust: str: implement `AsRef<BStr>` for `[u8]` and `BStr`
rust: str: implement `Index` for `BStr`
rust: str: implement `PartialEq` for `BStr`
...
|
|
This is a RGB to HDMI bridge, so set the bridge type accordingly.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250326101124.4031874-1-alexander.stein@ew.tq-group.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Changes the himax-hx8394 panel to use multi style functions for
improved error handling.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250325094707.961349-1-tejasvipin76@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
