| Age | Commit message (Collapse) | Author |
|---|
|
Use connector->display_info.is_hdmi instead of manually using
drm_detect_hdmi_monitor().
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/639657/
Link: https://lore.kernel.org/r/20250226-bridge-hdmi-connector-v8-4-340af24b35cc@linaro.org
|
|
Setup the HDMI connector on the MSM HDMI outputs. Make use of
atomic_check hook and of the provided Infoframe infrastructure.
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/639656/
Link: https://lore.kernel.org/r/20250226-bridge-hdmi-connector-v8-3-340af24b35cc@linaro.org
|
|
The mode_set callback is deprecated, it doesn't get the
drm_bridge_state, just mode-related argumetns. Also Abhinav pointed out
that HDMI timings should be programmed before setting up HDMI PHY and
PLL. Rework the code to program HDMI timings at the start of
atomic_pre_enable().
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/639652/
Link: https://lore.kernel.org/r/20250226-bridge-hdmi-connector-v8-2-340af24b35cc@linaro.org
|
|
Change MSM HDMI bridge to use atomic_* callbacks in preparation to
enablign the HDMI connector support.
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/639653/
Link: https://lore.kernel.org/r/20250226-bridge-hdmi-connector-v8-1-340af24b35cc@linaro.org
|
|
Set writeback encoders as possible clones for DSI encoders and vice
versa.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/637498/
Link: https://lore.kernel.org/r/20250214-concurrent-wb-v6-14-a44c293cf422@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Add a helper that will handle the correct order of the encoder kickoffs
for concurrent writeback.
For concurrent writeback, the realtime encoder must always kickoff last
as it will call the trigger flush and start.
This avoids the following scenario where the writeback encoder
increments the pending kickoff count after the WB_DONE interrupt is
fired:
If the realtime encoder is kicked off first, the encoder kickoff will
flush/start the encoder and increment the pending kickoff count. The
WB_DONE interrupt then fires (before the writeback encoder is kicked
off). When the writeback encoder enters its kickoff, it will skip the
flush/start (due to CWB being enabled) and hit a frame done timeout
as the frame was kicked off (and the WB_DONE interrupt fired) without
the pending kickoff count being incremented.
In addition, the writeback timer should only start after the realtime
encoder is kicked off to ensure that we don't get timeouts when the
system has a heavy load (ex. when debug logs are enabled)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/637491/
Link: https://lore.kernel.org/r/20250214-concurrent-wb-v6-13-a44c293cf422@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
For concurrent writeback, the real time encoder is responsible for
trigger flush and trigger start. Return early for trigger start and
trigger flush for the concurrent writeback encoders.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/637505/
Link: https://lore.kernel.org/r/20250214-concurrent-wb-v6-12-a44c293cf422@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Starting the frame done timer before the encoder is finished kicking off
can lead to unnecessary frame done timeouts when the device is
experiencing heavy load (ex. when debug logs are enabled).
Thus, create a separate API for starting the encoder frame done timer and
call it after the encoder kickoff is finished
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/637502/
Link: https://lore.kernel.org/r/20250214-concurrent-wb-v6-11-a44c293cf422@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Adjust QoS remapper, OT limit, and CDP parameters to account for
concurrent writeback
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/637490/
Link: https://lore.kernel.org/r/20250214-concurrent-wb-v6-10-a44c293cf422@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
The CWB mux has a pending flush bit and *_active register.
Add support for configuring them within the dpu_hw_ctl layer.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/637492/
Link: https://lore.kernel.org/r/20250214-concurrent-wb-v6-9-a44c293cf422@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Cache the CWB block mask in the DPU virtual encoder and configure CWB
according to the CWB block mask within the writeback phys encoder
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/637501/
Link: https://lore.kernel.org/r/20250214-concurrent-wb-v6-8-a44c293cf422@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Add support for RM to reserve dedicated CWB PINGPONGs and CWB muxes
For concurrent writeback, even-indexed CWB muxes must be assigned to
even-indexed LMs and odd-indexed CWB muxes for odd-indexed LMs. The same
even/odd rule applies for dedicated CWB PINGPONGs.
Track the CWB muxes in the global state and add a CWB-specific helper to
reserve the correct CWB muxes and dedicated PINGPONGs following the
even/odd rule.
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/637495/
Link: https://lore.kernel.org/r/20250214-concurrent-wb-v6-7-a44c293cf422@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Currently, our hardware only supports a single output using CDM block at
most. Because of this, we cannot support cases where both writeback and DP
output request CDM simultaneously
To avoid this happening when CWB is enabled, change
msm_display_topoloy.needs_cdm into a num_cdm counter to track how many
outputs are requesting CDM block. Return EINVAL if multiple outputs are
trying to reserve CDM.
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/637499/
Link: https://lore.kernel.org/r/20250214-concurrent-wb-v6-6-a44c293cf422@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
If the clone mode enabled status is changing, a modeset needs to happen
so that the resources can be reassigned
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/637483/
Link: https://lore.kernel.org/r/20250214-concurrent-wb-v6-5-a44c293cf422@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Currently, the topology is calculated based on the assumption that the
user cannot request real-time and writeback simultaneously. For example,
the number of LMs and CTLs are currently based off the number of phys
encoders under the assumption there will be at least 1 LM/CTL per phys
encoder.
This will not hold true for concurrent writeback as both phys encoders
(1 real-time and 1 writeback) must be driven by 1 LM/CTL when concurrent
writeback is enabled.
To account for this, add a cwb_enabled flag and only adjust the number of
CTL/LMs needed by a given topology based on the number of phys encoders
only if CWB is not enabled.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/637486/
Link: https://lore.kernel.org/r/20250214-concurrent-wb-v6-4-a44c293cf422@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Up to now the driver has been using encoder to allocate hardware
resources. Switch it to use CRTC id in preparation for the next step.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/637503/
Link: https://lore.kernel.org/r/20250214-concurrent-wb-v6-3-a44c293cf422@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
All resource allocation is centered around the LMs. Then other blocks
(except DSCs) are allocated basing on the LMs that was selected, and LM
powers up the CRTC rather than the encoder.
Moreover if at some point the driver supports encoder cloning,
allocating resources from the encoder will be incorrect, as all clones
will have different encoder IDs, while LMs are to be shared by these
encoders.
In addition, move mode_changed() to dpu_crtc as encoder no longer has
access to topology information
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[quic_abhinavk@quicinc.com: Refactored resource allocation for CDM]
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
[quic_jesszhan@quicinc.com: Changed to grabbing exising global state]
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
[DB: rebased on top of msm-next]
[DB: fixed resource allcoation to ignore the active_changed flag]
Patchwork: https://patchwork.freedesktop.org/patch/637487/
Link: https://lore.kernel.org/r/20250214-concurrent-wb-v6-2-a44c293cf422@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Stop poking into CRTC state from dpu_encoder.c, fill CRTC HW resources
from dpu_crtc_assign_resources().
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[quic_abhinavk@quicinc.com: cleaned up formatting]
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/637485/
Link: https://lore.kernel.org/r/20250214-concurrent-wb-v6-1-a44c293cf422@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
The MSM driver uses drm_atomic_helper_check() which mandates that none
of the atomic_check() callbacks toggles crtc_state->mode_changed.
Perform corresponding check before calling the drm_atomic_helper_check()
function.
Fixes: 8b45a26f2ba9 ("drm/msm/dpu: reserve cdm blocks for writeback in case of YUV output")
Reported-by: Simona Vetter <simona.vetter@ffwll.ch>
Closes: https://lore.kernel.org/dri-devel/ZtW_S0j5AEr4g0QW@phenom.ffwll.local/
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
[DB: dropped the WARN_ON]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/633400/
Link: https://lore.kernel.org/r/20250123-drm-dirty-modeset-v2-4-bbfd3a6cd1a4@linaro.org
|
|
Any rules using engine matching are currently broken due RTP processing
happening too in early init, before the list of hardware engines has been
initialised.
Fix this by moving workaround processing to later in the driver probe
sequence, to just before the processed list is used for the first time.
Looking at the debugfs gt0/workarounds on ADL-P we notice 14011060649
should be present while we see, before:
GT Workarounds
14011059788
14015795083
And with the patch:
GT Workarounds
14011060649
14011059788
14015795083
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: stable@vger.kernel.org # v6.11+
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250227101304.46660-2-tvrtko.ursulin@igalia.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 25d434cef791e03cf40680f5441b576c639bfa84)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Currently we just leave it uninitialised, which at first looks harmless,
however we also don't zero out the pfn array, and with pfn_flags_mask
the idea is to be able set individual flags for a given range of pfn or
completely ignore them, outside of default_flags. So here we end up with
pfn[i] & pfn_flags_mask, and if both are uninitialised we might get back
an unexpected flags value, like asking for read only with default_flags,
but getting back write on top, leading to potentially bogus behaviour.
To fix this ensure we zero the pfn_flags_mask, such that hmm only
considers the default_flags and not also the initial pfn[i] value.
v2 (Thomas):
- Prefer proper initializer.
Fixes: 81e058a3e7fd ("drm/xe: Introduce helper to populate userptr")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@intel.com>
Cc: <stable@vger.kernel.org> # v6.10+
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226174748.294285-2-matthew.auld@intel.com
(cherry picked from commit dd8c01e42f4c5c1eaf02f003d7d588ba6706aa71)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
We create the stream encoders and attach connectors for each pipe we
have. As the number of pipes has increased, we've failed to update the
topology manager maximum number of payloads to match that. Bump up the
max stream count to match number of pipes, enabling the fourth stream on
platforms that support four pipes.
Cc: stable@vger.kernel.org
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226135626.1956012-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 15bccbfb78d63a2a621b30caff8b9424160c6c89)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
This is already handled below in the code by fixup_initial_plane_config.
Fixes: a8153627520a ("drm/i915: Try to relocate the BIOS fb to the start of ggtt")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210083111.230484-3-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
(cherry picked from commit 2218704997979fbf11765281ef752f07c5cf25bb)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
While missing lvds pinctrl is unexpected and is reported, we nevertheless
don't fail setting up the device and instead continue without explicit
pinctrl handling. So lower the log-level from error to warning to reflect
that.
Suggested-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250304124418.111061-4-heiko@sntech.de
|
|
Commit 52d11c863ac9 ("drm/rockchip: lvds: do not print scary message when
probing defer") already started hiding scary messages that are not relevant
if the requested supply just returned EPROBE_DEFER, but there are more
possible sources - like the phy.
So modernize the whole logging in the probe path by replacing the
remaining deprecated DRM_DEV_ERROR with appropriate dev_err(_probe)
and drm_err calls.
The distinction here is that all messages talking about mishaps of the
lvds element use dev_err(_probe) while messages caused by interaction
with the main Rockchip drm-device use drm_err.
Reviewed-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250304124418.111061-3-heiko@sntech.de
|
|
The LVDS block needs a separate pclk only on some socs, so currently
requests and prepares it in the soc-specific probe function, but common
code is required to unprepare it in the error path or on driver remove.
While this works because clk_unprepare just does nothing if clk is NULL,
this mismatch of who is responsible still is not very nice.
The clock-framework already has a helper for clk-get-and-prepare even
with devres support in devm_clk_get_prepared().
This will get and prepare the clock and also unprepare it on driver
removal, saving the driver from having to handle it "manually".
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250304124418.111061-2-heiko@sntech.de
|
|
The expectation is that the struct drm_device based logging helpers get
passed an actual struct drm_device pointer rather than some random
struct pointer where you can dereference the ->dev member.
Convert drm_err(sched, ...) to dev_err(sched->dev, ...) and
similar. This matches current usage, as struct drm_device is not
available, but drops "[drm]" or "[drm] *ERROR*" prefix from logging.
Unfortunately, there's no dev_WARN_ON(), so the conversion is not
exactly the same.
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Philipp Stanner <phasta@kernel.org>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fe441dd1469d2b03e6b2ff247078bdde2011c6e3.1737644530.git.jani.nikula@intel.com
|
|
The expectation is that the struct drm_device based logging helpers get
passed an actual struct drm_device pointer rather than some random
struct pointer where you can dereference the ->dev member.
Convert drm_err(hdmi, ...) to dev_err(hdmi->dev, ...). This matches
current usage, but drops "[drm] *ERROR*" prefix from logging.
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f42da4c9943a2f2a9de4272b7849e72236d4c3f9.1737644530.git.jani.nikula@intel.com
|
|
The expectation is that the struct drm_device based logging helpers get
passed an actual struct drm_device pointer rather than some random
struct pointer where you can dereference the ->dev member.
Convert drm_err(host, ...) to dev_err(host->dev, ...). This matches
current usage, as struct drm_device is not available, but drops "[drm]
*ERROR*" from logs.
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/842f97ade87d6f0c4b1de12e8ed5610a1b07fd8c.1737644530.git.jani.nikula@intel.com
|
|
When building for a 32-bit platform, there are some warnings (or errors
with CONFIG_WERROR=y) due to an incorrect specifier for 'size_t'
variables, which is typedef'd as 'unsigned int' for these architectures:
drivers/gpu/drm/tiny/appletbdrm.c:171:17: error: format specifies type 'unsigned long' but the argument has type 'size_t' (aka 'unsigned int') [-Werror,-Wformat]
170 | drm_err(drm, "Actual size (%d) doesn't match expected size (%lu)\n",
| ~~~
| %zu
171 | actual_size, size);
| ^~~~
...
drivers/gpu/drm/tiny/appletbdrm.c:212:17: error: format specifies type 'unsigned long' but the argument has type 'size_t' (aka 'unsigned int') [-Werror,-Wformat]
211 | drm_err(drm, "Actual size (%d) doesn't match expected size (%lu)\n",
| ~~~
| %zu
212 | actual_size, size);
| ^~~~
Use '%zu' as suggested, clearing up the warnings.
Fixes: 0670c2f56e45 ("drm/tiny: add driver for Apple Touch Bars in x86 Macs")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Aditya Garg <gargaditya08@live.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250304-appletbdrm-fix-size_t-specifier-v1-1-94fe1d2c91f8@kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
We customarily define the bits of a register in big endian
order. Reorder the gen9+ timestamp freq register bits to match.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211231941.22769-13-ville.syrjala@linux.intel.com
|
|
Convert the gen9+ timestamo frequency related registers to
the modern REG_BIT()/etc. style.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211231941.22769-12-ville.syrjala@linux.intel.com
|
|
We customarily define the bits of a register in big endian
order. Reorder the BDW+ fuse bits to match.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211231941.22769-11-ville.syrjala@linux.intel.com
|
|
Convert the BDW+ EU/slice fuse bits to the modern REG_BIT()/etc.
style.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211231941.22769-10-ville.syrjala@linux.intel.com
|
|
We customarily define the bits of a register in big endian
order. Reorder the CHV fuse bits to match.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211231941.22769-9-ville.syrjala@linux.intel.com
|
|
Convert the CHV EU/slice fuse bits to the modern REG_BIT()/etc.
style.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211231941.22769-8-ville.syrjala@linux.intel.com
|
|
gen8_check_faults() and xehp_check_faults() are nearly identical.
Refactor the common bits into gen8_report_fault().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211231941.22769-7-ville.syrjala@linux.intel.com
|
|
Add a proper bitmask definition for the pre-bdw fault
virtual address bits insted of abusing PAGE_MASK.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211231941.22769-6-ville.syrjala@linux.intel.com
|
|
The RING_FAULT bits have change a bit over the years. Document
which platforms use which bits.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211231941.22769-5-ville.syrjala@linux.intel.com
|
|
Update the ring fault registers to use the modern REG_BIT()
stuff.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211231941.22769-4-ville.syrjala@linux.intel.com
|
|
We share the bit definitions between the older
RING_FAULT registers and their various gen12+
counterparts. Currently the bits are defined next
to the new registers which isn't what we typically do.
Move the bit definitions next the older register offsets,
and leave breadcrumbs around the gen12+ registers to make
it easier to find the right bits.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211231941.22769-3-ville.syrjala@linux.intel.com
|
|
The fault engine ID field has been 5 bits since icl. Bump our
define to match. The extra bits were unused before icl so we
should be able to use the larger mask unconditionally.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211231941.22769-2-ville.syrjala@linux.intel.com
|
|
Commit 328e6885996c ("drm/rockchip: vop2: Add platform specific callback")
moved per soc configuration code to the other per-soc data into
rockchip_vop2_reg.c, but forgot to also include bitfield.h for the used
FIELD_PREP macro. Add this missing include.
Fixes: 328e6885996c ("drm/rockchip: vop2: Add platform specific callback")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503040135.fgoyWdLB-lkp@intel.com/
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250303182256.1727178-1-heiko@sntech.de
|
|
VOP2 on rk3576:
Three video ports:
VP0 Max 4096x2160
VP1 Max 2560x1600
VP2 Max 1920x1080
2 4K Cluster windows with AFBC/RFBC, line RGB and YUV
4 Esmart windows with line RGB/YUV support:
Esmart0/1: 4K
Esmart2/3: 2k, or worked together as a single 4K plane at shared
line buffer mode.
Compared to the previous VOP, another difference is that each VP
has its own independent vsync interrupt number.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Michael Riesch <michael.riesch@wolfvision.net> # on RK3568
Tested-by: Detlev Casanova <detlev.casanova@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250303034436.192400-8-andyshrk@163.com
|
|
The Cluster windows of upcoming VOP on rk3576 also support
linear YUV support, we need to set uv swap bit for it.
As the VOP2_WIN_UV_SWA register defined on rk3568/rk3588 is
0xffffffff, so this register will not be touched on these
two platforms.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Michael Riesch <michael.riesch@wolfvision.net> # on RK3568
Tested-by: Detlev Casanova <detlev.casanova@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250303034436.192400-4-andyshrk@163.com
|
|
In the upcoming VOP of rk3576, a window cannot attach to all Video
Ports, we introduce a possible_vp_mask for every window to indicate
which Video Ports this window can attach to.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Michael Riesch <michael.riesch@wolfvision.net> # on RK3568
Tested-by: Detlev Casanova <detlev.casanova@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250303034436.192400-3-andyshrk@163.com
|
|
In the upcoming VOP of rk3576, a Window cannot attach to all Video Ports,
so make sure all VP find it's suitable primary plane, then register the
remain windows as overlay plane will make code easier.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Michael Riesch <michael.riesch@wolfvision.net> # on RK3568
Tested-by: Detlev Casanova <detlev.casanova@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250303034436.192400-2-andyshrk@163.com
|
|
This display controller is present on M-series chips and is used
to drive the touchbar display.
Co-developed-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250224-adpdrm-v8-2-cccf96710f0f@gmail.com
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
|
|
The Touch Bars found on x86 Macs support two USB configurations: one
where the device presents itself as a HID keyboard and can display
predefined sets of keys, and one where the operating system has full
control over what is displayed.
This commit adds support for the display functionality of the second
configuration. Functionality for the first configuration has been
merged in the HID tree.
Note that this driver has only been tested on T2 Macs, and only includes
the USB device ID for these devices. Testing on T1 Macs would be
appreciated.
Credit goes to Ben (Bingxing) Wang on GitHub for reverse engineering
most of the protocol.
Also, as requested by Andy, I would like to clarify the use of __packed
structs in this driver:
- All the packed structs are aligned except for appletbdrm_msg_information.
- We have to pack appletbdrm_msg_information since it is requirement of
the protocol.
- We compared binaries compiled by keeping the rest structs __packed and
not __packed using bloat-o-meter, and __packed was not affecting code
generation.
- To maintain consistency, rest structs have been kept __packed.
I would also like to point out that since the driver was reverse-engineered
the actual data types of the protocol might be different, including, but
not limited to, endianness.
Link: https://github.com/imbushuo/DFRDisplayKm
Signed-off-by: Kerem Karabay <kekrby@gmail.com>
Co-developed-by: Atharva Tiwari <evepolonium@gmail.com>
Signed-off-by: Atharva Tiwari <evepolonium@gmail.com>
Co-developed-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Aun-Ali Zaidi <admin@kodeit.net>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/FCAC702C-F84A-47F9-8C78-BBBB34D08500@live.com
|
|
Add XRGB8888 emulation helper for devices that only support BGR888.
Signed-off-by: Kerem Karabay <kekrby@gmail.com>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/9A67EA95-9BC7-4D56-8F87-05EAC1C166AD@live.com
|
