summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2016-03-17drm/i915: Move pll power state to crtc power domains.Maarten Lankhorst
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1457944075-14123-4-git-send-email-maarten.lankhorst@linux.intel.com Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
2016-03-17drm/i915: Perform dpll commit first, v2.Maarten Lankhorst
Warn for the wrong mask in enable only. Disable will have the wrong mask now because the new state is committed before disabling the old state. Changes since v1: - Use crtc_mask (Durgadoss) - Rebase. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1457944075-14123-3-git-send-email-maarten.lankhorst@linux.intel.com Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
2016-03-17drm/i915: Use a crtc mask instead of a refcount for dpll functions, v2.Maarten Lankhorst
This makes it easier to verify correct dpll setup with only a single crtc. It is also useful to detect double dpll enable/disable. Changes since v1: - Rebase on top of Ander's dpll rework. - Change debugfs active to a mask. - Change enabled_crtcs and active_crtcs to unsigned. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1457944075-14123-2-git-send-email-maarten.lankhorst@linux.intel.com Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
2016-03-17drm/i915: Fix race condition in intel_dp_destroy_mst_connector()Lyude
After unplugging a DP MST display from the system, we have to go through and destroy all of the DRM connectors associated with it since none of them are valid anymore. Unfortunately, intel_dp_destroy_mst_connector() doesn't do a good enough job of ensuring that throughout the destruction process that no modesettings can be done with the connectors. As it is right now, intel_dp_destroy_mst_connector() works like this: * Take all modeset locks * Clear the configuration of the crtc on the connector, if there is one * Drop all modeset locks, this is required because of circular dependency issues that arise with trying to remove the connector from sysfs with modeset locks held * Unregister the connector * Take all modeset locks, again * Do the rest of the required cleaning for destroying the connector * Finally drop all modeset locks for good This only works sometimes. During the destruction process, it's very possible that a userspace application will attempt to do a modesetting using the connector. When we drop the modeset locks, an ioctl handler such as drm_mode_setcrtc has the oppurtunity to take all of the modeset locks from us. When this happens, one thing leads to another and eventually we end up committing a mode with the non-existent connector: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* failed to enable link training [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7cf0001f [drm:intel_dp_start_link_train [i915]] *ERROR* failed to start channel equalization [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7cf0001f [drm:intel_mst_pre_enable_dp [i915]] *ERROR* failed to allocate vcpi And in some cases, such as with the T460s using an MST dock, this results in breaking modesetting and/or panicking the system. To work around this, we now unregister the connector at the very beginning of intel_dp_destroy_mst_connector(), grab all the modesetting locks, and then hold them until we finish the rest of the function. CC: stable@vger.kernel.org Signed-off-by: Lyude <cpaul@redhat.com> Signed-off-by: Rob Clark <rclark@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1458155884-13877-1-git-send-email-cpaul@redhat.com
2016-03-17Merge branch '2016-02-26-st-drm-next' of ↵Dave Airlie
http://git.linaro.org/people/benjamin.gaignard/kernel into drm-next Here are sti patches for drm-next. It brings: - The support of the atomic_check for the planes and minor fixes for planes - The support of the vendor specific infoframe for HDMI and the support of 2 HDMI properties related to the connector - The support of the DVO solving panel detection issue and timing issue. - The support of debugfs for connectors, encoders, crtcs and planes. * '2016-02-26-st-drm-next' of http://git.linaro.org/people/benjamin.gaignard/kernel: (36 commits) drm/sti: use u32 to store DMA addresses drm: sti: remove sti_gem_prime_export hack drm/sti: add debugfs fps_show/fps_get mechanism for planes drm/sti: add debugfs entries for TVOUT encoders drm/sti: add debugfs entries for MIXER crtc drm/sti: add debugfs entries for VID plane drm/sti: add debugfs entries for HQVDP plane drm/sti: add debugfs entries for GDP planes drm/sti: add debugfs entries for CURSOR plane drm/sti: add debugfs entries for HDA connector drm/sti: add debugfs entries for DVO connector drm/sti: add debugfs entries for HDMI connector drm/sti: add hdmi_mode property for HDMI connector drm/sti: add colorspace property to the HDMI connector drm/sti: add HDMI vendor specific infoframe drm/sti: reset infoframe transmission when HDMI is stopped drm/sti: HDMI infoframe transmission mode not take into account drm/sti: reset HD DACS when HDA connector is created drm/sti: fix dvo data_enable signal drm/sti: adjust delay for DVO ...
2016-03-16drm/i915/guc: Support GuC SKL v6.1Alex Dai
This version of GuC firmware fixes the engine reset issue where golden context LRC address is treated as page index by mistake. It also fixes the problem that scheduler stops submiting to one engine when the other engine work queue is full. Signed-off-by: Alex Dai <yu.dai@intel.com> Reviewed-by: Dave Gordon <david.s.gordon@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2016-03-17Merge branch 'drm-next-4.6' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next A few more fixes and cleanups for 4.6: - DCE code cleanups - HDP flush/invalidation fixes - GPUVM fixes - switch to drm_vblank_[on|off] - PX fixes - misc bug fixes * 'drm-next-4.6' of git://people.freedesktop.org/~agd5f/linux: (50 commits) drm/amdgpu: split pipeline sync out of SDMA vm_flush() as well drm/amdgpu: Revert "add mutex for ba_va->valids/invalids" drm/amdgpu: Revert "add lock for interval tree in vm" drm/amdgpu: Revert "add spin lock to protect freed list in vm (v3)" drm/amdgpu: reserve the PD during unmap and remove drm/amdgpu: Fix two bugs in amdgpu_vm_bo_split_mapping drm/radeon: Don't drop DP 2.7 Ghz link setup on some cards. MAINTAINERS: update radeon entry to include amdgpu as well drm/amdgpu: disable runtime pm on PX laptops without dGPU power control drm/radeon: disable runtime pm on PX laptops without dGPU power control drm/amd/amdgpu: Fix indentation in do_set_base() (DCEv8) drm/amd/amdgpu: make afmt_init cleanup if alloc fails (DCEv8) drm/amd/amdgpu: Move config init flag to bottom of sw_init (DCEv8) drm/amd/amdgpu: Don't proceed into audio_fini if audio is disabled (DCEv8) drm/amd/amdgpu: Fix identation in do_set_base() (DCEv10) drm/amd/amdgpu: Make afmt_init cleanup if alloc fails (DCEv10) drm/amd/amdgpu: Move initialized flag to bottom of sw_init (DCEv10) drm/amd/amdgpu: Don't proceed in audio_fini if disabled (DCEv10) drm/amd/amdgpu: Fix indentation in dce_v11_0_crtc_do_set_base() drm/amd/amdgpu: Make afmt_init() cleanup if alloc fails (DCEv11) ...
2016-03-17Merge tag 'vmwgfx-next-160316' of ↵Dave Airlie
git://people.freedesktop.org/~thomash/linux into drm-next Pull request of 2016-03-16 * tag 'vmwgfx-next-160316' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: Bump driver minor drm/vmwgfx: Allow the UPDATE_LAYOUT ioctl from control nodes drm/vmwgfx: Send a hotplug event at master_set drm/vmwgfx: Default to explicit crtc placement for screen targets and screen objects drm/vmwgfx: Calculate the cursor position based on the crtc gui origin drm/vmwgfx: Add connector properties to switch between explicit and implicit placement drm/vmwgfx: Add suggested screen x and y connector properties drm/vmwgfx: Add implicit framebuffer checks to the screen target code drm/vmwgfx: Break out implicit fb code drm/vmwgfx: Rework screen target page flips v2 drm/vmwgfx: Fix screen object page flips for large framebuffers drm/vmwgfx: Fix a screen object framebuffer dirty corner case drm/vmwgfx: Add DXGenMips support
2016-03-17Merge tag 'drm-intel-next-fixes-2016-03-16' of ↵Dave Airlie
http://anongit.freedesktop.org/git/drm-intel into drm-next * tag 'drm-intel-next-fixes-2016-03-16' of http://anongit.freedesktop.org/git/drm-intel: drm/i915: Handle -EDEADLK in drm_atomic_commit from load-detect.
2016-03-17Merge tag 'drm/panel/for-4.6-rc1' of ↵Dave Airlie
http://anongit.freedesktop.org/git/tegra/linux into drm-next drm/panel: Changes for v4.6-rc1 This contains a refactoring of parts of the DSI core to allow creating DSI devices from non-DSI control busses (i.e. I2C, SPI, ...). Other than that there's support for a couple of new panels as well as a few cleanup patches. * tag 'drm/panel/for-4.6-rc1' of http://anongit.freedesktop.org/git/tegra/linux: drm/bridge: Make (pre/post) enable/disable callbacks optional drm/panel: simple: Add URT UMSH-8596MD-xT panels support dt-bindings: Add URT UMSH-8596MD-xT panel bindings of: Add United Radiant Technology Corporation vendor prefix drm/panel: simple: Support for LG lp120up1 panel dt-bindings: Add LG lp120up1 panel bindings drm/panel: simple: Fix g121x1_l03 hsync/vsync polarity drm/dsi: Get DSI host by DT device node drm/dsi: Add routine to unregister a DSI device drm/dsi: Try to match non-DT DSI devices drm/dsi: Use mipi_dsi_device_register_full() for DSI device creation drm/dsi: Check for CONFIG_OF when defining of_mipi_dsi_device_add()
2016-03-17Merge tag 'drm/tegra/for-4.6-rc1' of ↵Dave Airlie
http://anongit.freedesktop.org/git/tegra/linux into drm-next drm/tegra: Changes for v4.6-rc1 Only two cleanups this time around. One fixes reference counting of device tree nodes, the other changes the return value of a function from an unsigned int to an int to reflect that it will return error codes. * tag 'drm/tegra/for-4.6-rc1' of http://anongit.freedesktop.org/git/tegra/linux: gpu: host1x: Use a signed return type for do_relocs() gpu: host1x: bus: Add missing of_node_put()
2016-03-16drm/radeon: fix indentation.Jérome Glisse
I hate doing this but it hurts my eyes to go over code that does not comply with indentation rules. Only thing that is not only space change is in atom.c all other files are space indentation issues. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-03-16drm/amd/powerplay: add uvd/vce dpm enabling flag to fix the performance ↵Eric Huang
issue for CZ Set the UVD and VCE DPM flags otherwise UVD and VCE DPM won't get enabled. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Cc: stable@vger.kernel.org
2016-03-16drm/amdgpu: switch back to 32bit hw fences v2Christian König
We don't need to extend them to 64bits any more, so avoid the extra overhead. v2: update commit message. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
2016-03-16drm/amdgpu: remove amdgpu_fence_is_signaledChristian König
It's just overhead to check the fence value when we signal them directly anyway. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
2016-03-16drm/amdgpu: drop the extra fence range check v2Christian König
Amdgpu doesn't support using scratch registers for fences any more. So we won't see values like 0xdeadbeef as fence value any more. v2: reschedule timer even if no change detected Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
2016-03-16drm/amdgpu: signal fences directly in amdgpu_fence_processChristian König
Because of the scheduler we need to signal all fences immediately anyway, so try to avoid the waitqueue overhead. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
2016-03-16drm/amdgpu: cleanup amdgpu_fence_wait_empty v2Christian König
Just wait for last fence instead of waiting for the sequence manually. v2: don't use amdgpu_sched_jobs for the mask Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
2016-03-16drm/amdgpu: keep all fences in an RCU protected array v2Christian König
Just keep all HW fences in a RCU protected array as a first step to replace the wait queue. v2: update commit message, move fixes into separate patch. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
2016-03-16drm/amdgpu: add number of hardware submissions to amdgpu_fence_driver_init_ringChristian König
Make this a parameter instead of using the global variable directly. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
2016-03-16drm/amdgpu: RCU protected amd_sched_fence_releaseChristian König
Fences must be freed RCU protected, otherwise the reservation_object_*_rcu() functions can run into problems. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2016-03-16drm/amdgpu: RCU protected amdgpu_fence_releaseChristian König
Fences must be freed RCU protected, otherwise the reservation_object_*_rcu() functions can run into problems. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2016-03-16drm/amdgpu: merge amdgpu_fence_process and _activityChristian König
No need to keep the two separate any more. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
2016-03-16drm/amdgpu: cleanup amdgpu_fence_activityChristian König
The comment about the loop counter was never valid, even when you have multiple threads this loop only runs as long as the sequence increases. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
2016-03-16Merge tag 'pci-v4.6-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI changes for v4.6: Enumeration: - Disable IO/MEM decoding for devices with non-compliant BARs (Bjorn Helgaas) - Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs (Bjorn Helgaas Resource management: - Mark shadow copy of VGA ROM as IORESOURCE_PCI_FIXED (Bjorn Helgaas) - Don't assign or reassign immutable resources (Bjorn Helgaas) - Don't enable/disable ROM BAR if we're using a RAM shadow copy (Bjorn Helgaas) - Set ROM shadow location in arch code, not in PCI core (Bjorn Helgaas) - Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs (Bjorn Helgaas) - ia64: Use ioremap() instead of open-coded equivalent (Bjorn Helgaas) - ia64: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas) - MIPS: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas) - Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY (Bjorn Helgaas) - Don't leak memory if sysfs_create_bin_file() fails (Bjorn Helgaas) - rcar: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi) - designware: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi) Virtualization: - Wait for up to 1000ms after FLR reset (Alex Williamson) - Support SR-IOV on any function type (Kelly Zytaruk) - Add ACS quirk for all Cavium devices (Manish Jaggi) AER: - Rename pci_ops_aer to aer_inj_pci_ops (Bjorn Helgaas) - Restore pci_ops pointer while calling original pci_ops (David Daney) - Fix aer_inject error codes (Jean Delvare) - Use dev_warn() in aer_inject (Jean Delvare) - Log actual error causes in aer_inject (Jean Delvare) - Log aer_inject error injections (Jean Delvare) VPD: - Prevent VPD access for buggy devices (Babu Moger) - Move pci_read_vpd() and pci_write_vpd() close to other VPD code (Bjorn Helgaas) - Move pci_vpd_release() from header file to pci/access.c (Bjorn Helgaas) - Remove struct pci_vpd_ops.release function pointer (Bjorn Helgaas) - Rename VPD symbols to remove unnecessary "pci22" (Bjorn Helgaas) - Fold struct pci_vpd_pci22 into struct pci_vpd (Bjorn Helgaas) - Sleep rather than busy-wait for VPD access completion (Bjorn Helgaas) - Update VPD definitions (Hannes Reinecke) - Allow access to VPD attributes with size 0 (Hannes Reinecke) - Determine actual VPD size on first access (Hannes Reinecke) Generic host bridge driver: - Move structure definitions to separate header file (David Daney) - Add pci_host_common_probe(), based on gen_pci_probe() (David Daney) - Expose pci_host_common_probe() for use by other drivers (David Daney) Altera host bridge driver: - Fix altera_pcie_link_is_up() (Ley Foon Tan) Cavium ThunderX host bridge driver: - Add PCIe host driver for ThunderX processors (David Daney) - Add driver for ThunderX-pass{1,2} on-chip devices (David Daney) Freescale i.MX6 host bridge driver: - Add DT bindings to configure PHY Tx driver settings (Justin Waters) - Move imx6_pcie_reset_phy() near other PHY handling functions (Lucas Stach) - Move PHY reset into imx6_pcie_establish_link() (Lucas Stach) - Remove broken Gen2 workaround (Lucas Stach) - Move link up check into imx6_pcie_wait_for_link() (Lucas Stach) Freescale Layerscape host bridge driver: - Add "fsl,ls2085a-pcie" compatible ID (Yang Shi) Intel VMD host bridge driver: - Attach VMD resources to parent domain's resource tree (Jon Derrick) - Set bus resource start to 0 (Keith Busch) Microsoft Hyper-V host bridge driver: - Add fwnode_handle to x86 pci_sysdata (Jake Oshins) - Look up IRQ domain by fwnode_handle (Jake Oshins) - Add paravirtual PCI front-end for Microsoft Hyper-V VMs (Jake Oshins) NVIDIA Tegra host bridge driver: - Add pci_ops.{add,remove}_bus() callbacks (Thierry Reding) - Implement ->{add,remove}_bus() callbacks (Thierry Reding) - Remove unused struct tegra_pcie.num_ports field (Thierry Reding) - Track bus -> CPU mapping (Thierry Reding) - Remove misleading PHYS_OFFSET (Thierry Reding) Renesas R-Car host bridge driver: - Depend on ARCH_RENESAS, not ARCH_SHMOBILE (Simon Horman) Synopsys DesignWare host bridge driver: - ARC: Add PCI support (Joao Pinto) - Add generic dw_pcie_wait_for_link() (Joao Pinto) - Add default link up check if sub-driver doesn't override (Joao Pinto) - Add driver for prototyping kits based on ARC SDP (Joao Pinto) TI Keystone host bridge driver: - Defer probing if devm_phy_get() returns -EPROBE_DEFER (Shawn Lin) Xilinx AXI host bridge driver: - Use of_pci_get_host_bridge_resources() to parse DT (Bharat Kumar Gogada) - Remove dependency on ARM-specific struct hw_pci (Bharat Kumar Gogada) - Don't call pci_fixup_irqs() on Microblaze (Bharat Kumar Gogada) - Update Zynq binding with Microblaze node (Bharat Kumar Gogada) - microblaze: Support generic Xilinx AXI PCIe Host Bridge IP driver (Bharat Kumar Gogada) Xilinx NWL host bridge driver: - Add support for Xilinx NWL PCIe Host Controller (Bharat Kumar Gogada) Miscellaneous: - Check device_attach() return value always (Bjorn Helgaas) - Move pci_set_flags() from asm-generic/pci-bridge.h to linux/pci.h (Bjorn Helgaas) - Remove includes of empty asm-generic/pci-bridge.h (Bjorn Helgaas) - ARM64: Remove generated include of asm-generic/pci-bridge.h (Bjorn Helgaas) - Remove empty asm-generic/pci-bridge.h (Bjorn Helgaas) - Remove includes of asm/pci-bridge.h (Bjorn Helgaas) - Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h (Bjorn Helgaas) - unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition (Bjorn Helgaas) - Cleanup pci/pcie/Kconfig whitespace (Andreas Ziegler) - Include pci/hotplug Kconfig directly from pci/Kconfig (Bjorn Helgaas) - Include pci/pcie/Kconfig directly from pci/Kconfig (Bogicevic Sasa) - frv: Remove stray pci_{alloc,free}_consistent() declaration (Christoph Hellwig) - Move pci_dma_* helpers to common code (Christoph Hellwig) - Add PCI_CLASS_SERIAL_USB_DEVICE definition (Heikki Krogerus) - Add QEMU top-level IDs for (sub)vendor & device (Robin H. Johnson) - Fix broken URL for Dell biosdevname (Naga Venkata Sai Indubhaskar Jupudi)" * tag 'pci-v4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits) PCI: Add PCI_CLASS_SERIAL_USB_DEVICE definition PCI: designware: Add driver for prototyping kits based on ARC SDP PCI: designware: Add default link up check if sub-driver doesn't override PCI: designware: Add generic dw_pcie_wait_for_link() PCI: Cleanup pci/pcie/Kconfig whitespace PCI: Simplify pci_create_attr() control flow PCI: Don't leak memory if sysfs_create_bin_file() fails PCI: Simplify sysfs ROM cleanup PCI: Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY MIPS: Loongson 3: Keep CPU physical (not virtual) addresses in shadow ROM resource MIPS: Loongson 3: Use temporary struct resource * to avoid repetition ia64/PCI: Keep CPU physical (not virtual) addresses in shadow ROM resource ia64/PCI: Use ioremap() instead of open-coded equivalent ia64/PCI: Use temporary struct resource * to avoid repetition PCI: Clean up pci_map_rom() whitespace PCI: Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs PCI: thunder: Add driver for ThunderX-pass{1,2} on-chip devices PCI: thunder: Add PCIe host driver for ThunderX processors PCI: generic: Expose pci_host_common_probe() for use by other drivers PCI: generic: Add pci_host_common_probe(), based on gen_pci_probe() ...
2016-03-16drm/i915/bios: drop has_mipi in favor of intel_bios_is_dsi_presentJani Nikula
Favor a single point of truth instead of duplicating the information. The change also filters out unsupported DSI ports at this stage, accepting only ports A and C, instead of waiting until the port checks. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1458125015-7931-6-git-send-email-jani.nikula@intel.com
2016-03-16drm/i915/panel: setup pwm backlight based on connector typeJani Nikula
Use the connector type instead of VBT directly to decide which backlight mechanism to use on VLV/CHV. (Indirectly, this is the same thing, but hides the VBT use.) Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1458125015-7931-5-git-send-email-jani.nikula@intel.com
2016-03-16drm/i915: move VBT based DSI presence check to intel_bios.cJani Nikula
Hide knowledge about VBT child devices in intel_bios.c. v2: Move port check to intel_bios.c (Sivakumar) Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1458125015-7931-4-git-send-email-jani.nikula@intel.com
2016-03-16drm/i915: move VBT based eDP port check to intel_bios.cJani Nikula
Hide knowledge about VBT child devices in intel_bios.c. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1458125015-7931-3-git-send-email-jani.nikula@intel.com
2016-03-16drm/i915: move VBT based LVDS presence check to intel_bios.cJani Nikula
Hide knowledge about VBT child devices in intel_bios.c. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1458125015-7931-2-git-send-email-jani.nikula@intel.com
2016-03-16drm/i915: move VBT based TV presence check to intel_bios.cJani Nikula
Hide knowledge about VBT child devices in intel_bios.c. v2: also move int_tv_support check to intel_bios.c (Sivakumar) Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1458125015-7931-1-git-send-email-jani.nikula@intel.com
2016-03-16drm/i915/bxt: fix dsi hw state pipe readoutJani Nikula
BXT isn't as limited as BYT and CHT regarding DSI pipes and ports. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/8bea85b86aaf7a15f854a656bf8d3208a3afe0bd.1458070700.git.jani.nikula@intel.com
2016-03-16drm/i915/dsi: refactor dsi get hw state readoutJani Nikula
Make the code easier to read and update. No functional changes. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/04b20a9be6a9481ca2eb2a42cdcdc27358152e5f.1458070700.git.jani.nikula@intel.com
2016-03-16drm/i915: make transcoder_name return a stringJani Nikula
Nicer for eDP (actually "EDP" instead of "D"), and makes future expansion for DSI transcoders easier. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/2ac55ed584e450fe154daecb6453dff8eede5e7d.1458070700.git.jani.nikula@intel.com
2016-03-16drm/i915: add for_each_port_masked macroJani Nikula
Same as for_each_dsi_port, but for general use. Leave the for_each_dsi_port version around as an "alias" for now to not cause too much churn. No functional changes. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/a0ef5bf33395e1fcd87178b17d6687b022042cf7.1458070700.git.jani.nikula@intel.com
2016-03-16drm/i915/dsi: start using enum mipi_dsi_pixel_formatJani Nikula
A small step moving us closer to DRM MIPI DSI code. Use enum mipi_dsi_pixel_format instead of our own. The first benefit is being able to use common mipi_dsi_pixel_format_to_bpp(). There's a little back and forth conversion with the VBT -> enum -> register, since we have just shoved the VBT value into the register directly. Longer term, all the VBT parsing and deciphering should be done in intel_bios.c, and abstracted there. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1458123700-16003-2-git-send-email-jani.nikula@intel.com
2016-03-16drm/i915/dsi: lose the loose 666 format name in favor of packedJani Nikula
The enum mipi_dsi_pixel_format defines MIPI_DSI_FMT_RGB666 for the "loose" 24 bpp format and MIPI_DSI_FMT_RGB666_PACKED for the 18 bpp format. We have this the other way round, defining a loose version for 24 bpp. Follow suit with what's in enum mipi_dsi_pixel_format to avoid future confusion. Rename VID_MODE_FORMAT_RGB666 -> VID_MODE_FORMAT_RGB666_PACKED VID_MODE_FORMAT_RGB666_LOOSE -> VID_MODE_FORMAT_RGB666 Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1458123700-16003-1-git-send-email-jani.nikula@intel.com
2016-03-16drm/i915/csr: Allow matching unknown HW steppings with generic firmwareChris Wilson
If the firmware is generic and has a run-anywhere mode, enable it rather than completely failing on unknown HW revisions. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Damien Lespiau <damien.lespiau@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Sunil Kamath <sunil.kamath@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Animesh Manna <animesh.manna@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1457352357-8433-1-git-send-email-chris@chris-wilson.co.uk
2016-03-16drm/i915: add module param "enable_dp_mst"Nathan Schulte
Adds an (unsafe; auto-kernel-tainting) boolean module parameter to the i915 drm driver: "enable_dp_mst", which is enabled by default. Disabling the parameter forces newly connected DisplayPort sinks to report as not supporting multi-stream transport (MST), thus "forcing" the use of single-stream transport (SST). v2: rename parameter to conform to style v3: add signoff Signed-off-by: Nathan Schulte <nmschulte@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1458054845-5837-1-git-send-email-nmschulte@gmail.com
2016-03-16drm/i915: More renaming of rings to enginesTvrtko Ursulin
This time using only sed and a few by hand. v2: Rename also intel_ring_id and intel_ring_initialized. v3: Fixed typo in intel_ring_initialized. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1458126040-33105-1-git-send-email-tvrtko.ursulin@linux.intel.com
2016-03-16drm/i915: More intel_engine_cs renamingTvrtko Ursulin
Some trivial ones, first pass done with Coccinelle: @@ @@ ( - I915_NUM_RINGS + I915_NUM_ENGINES | - intel_ring_flag + intel_engine_flag | - for_each_ring + for_each_engine | - i915_gem_request_get_ring + i915_gem_request_get_engine | - intel_ring_idle + intel_engine_idle | - i915_gem_reset_ring_status + i915_gem_reset_engine_status | - i915_gem_reset_ring_cleanup + i915_gem_reset_engine_cleanup | - init_ring_lists + init_engine_lists ) But that didn't fully work so I cleaned it up with: for f in *.[hc]; do sed -i -e s/I915_NUM_RINGS/I915_NUM_ENGINES/ $f; done for f in *.[hc]; do sed -i -e s/i915_gem_request_get_ring/i915_gem_request_get_engine/ $f; done for f in *.[hc]; do sed -i -e s/intel_ring_flag/intel_engine_flag/ $f; done for f in *.[hc]; do sed -i -e s/intel_ring_idle/intel_engine_idle/ $f; done for f in *.[hc]; do sed -i -e s/init_ring_lists/init_engine_lists/ $f; done for f in *.[hc]; do sed -i -e s/i915_gem_reset_ring_cleanup/i915_gem_reset_engine_cleanup/ $f; done for f in *.[hc]; do sed -i -e s/i915_gem_reset_ring_status/i915_gem_reset_engine_status/ $f; done v2: Rebase. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-03-16drm/i915: Rename intel_engine_cs struct membersTvrtko Ursulin
below and a couple manual fixups. @@ identifier I, J; @@ struct I { ... - struct intel_engine_cs *J; + struct intel_engine_cs *engine; ... } @@ identifier I, J; @@ struct I { ... - struct intel_engine_cs J; + struct intel_engine_cs engine; ... } @@ struct drm_i915_private *d; @@ ( - d->ring + d->engine ) @@ struct i915_execbuffer_params *p; @@ ( - p->ring + p->engine ) @@ struct intel_ringbuffer *r; @@ ( - r->ring + r->engine ) @@ struct drm_i915_gem_request *req; @@ ( - req->ring + req->engine ) v2: Script missed the tracepoint code - fixed up by hand. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-03-16drm/i915: Rename intel_engine_cs function parametersTvrtko Ursulin
@@ identifier func; @@ func(..., struct intel_engine_cs * - ring + engine , ...) { <... - ring + engine ...> } @@ identifier func; type T; @@ T func(..., struct intel_engine_cs * - ring + engine , ...); Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-03-16drm/i915: Rename local struct intel_engine_cs variablesTvrtko Ursulin
Done by the Coccinelle script below plus a manual intervention to GEN8_RING_SEMAPHORE_INIT. @@ expression E; @@ - struct intel_engine_cs *ring = E; + struct intel_engine_cs *engine = E; <+... - ring + engine ...+> @@ @@ - struct intel_engine_cs *ring; + struct intel_engine_cs *engine; <+... - ring + engine ...+> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-03-16drm/i915/bxt: Fix off-by-one error in Broxton PLL IDsImre Deak
After the commit below the Broxton PLL IDs had an off-by-one error, so fix this up. Also add a missing brace at intel_shared_dpll_init(), it happened to compile only due to the way the IS_BROXTON macro is defined. v2: - remove debugging left-over Fixes: a3c988ea068c ("drm/i915: Make SKL/KBL DPLL0 managed by the shared dpll code") CC: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> CC: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/1457978134-12362-1-git-send-email-imre.deak@intel.com
2016-03-16drm/i915: Nuke fbc members from intel_crtc->atomic, v4.Maarten Lankhorst
Whenever there's an update to the primary plane, fbc_pre_update and fbc_post_update are called. Kill off intel_crtc->atomic.update_fbc and now that intel_crtc->atomic is empty, kill it off too. Changes since v1: - Add a intel_fbc_supports_rotation helper. Changes since v2: - Remove intel_fbc_supports_rotation_helper. - Remove unrelated changes. Changes since v3: - Rebase Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1457516145-32117-2-git-send-email-maarten.lankhorst@linux.intel.com Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
2016-03-16drm/i915: Remove some post-commit members from intel_crtc->atomic, v3.Maarten Lankhorst
fb_bits is useful to have in the crtc_state for cs flips when the code is updated to use intel_frontbuffer_flip_prepare/complete. So calculate it in advance and move it to crtc_state. The other stuff can be calculated in post_plane_update, and aren't useful elsewhere. Changes since v1: - Changing wording, remove comment about loop. Changes since v2: - Rebase. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/1457516145-32117-1-git-send-email-maarten.lankhorst@linux.intel.com
2016-03-16gpu: host1x: Use a signed return type for do_relocs()Markus Elfring
The return type "unsigned int" was used by the do_relocs() function despite the fact that it will eventually return a negative error code. Use a signed integer instead to accomodate for error codes. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-03-16gpu: host1x: bus: Add missing of_node_put()Amitoj Kaur Chawla
for_each_child_of_node() performs an of_node_get() on each iteration, so to break out of the loop an of_node_put() is required. Found using Coccinelle. The semantic patch used for this is as follows: // <smpl> @@ expression e; local idexpression n; @@ for_each_child_of_node(..., n) { ... when != of_node_put(n) when != e = n ( return n; | + of_node_put(n); ? return ...; ) ... } // </smpl> Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-03-16Merge remote-tracking branch 'airlied/drm-next' into drm-intel-next-queuedDaniel Vetter
Backmerge because: - Maarten needs latest atomic patches from drm-misc. - Lionel needs the color manager core patch from drm-misc. - Ander extracted intel_dpll_mgr.c, we need a backmerge to avoid git losing track of things too often (right now it seems ok due to cherry-picks). - Tvrtko needs a stable baseline to apply some large-scale renaming patches to i915 GEM code. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
generated by cgit (git 2.34.1) at 2025-09-19 03:38:14 +0000