summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2016-05-05drm/radeon: fix DP link training issue with second 4K monitorArindam Nath
There is an issue observed when we hotplug a second DP 4K monitor to the system. Sometimes, the link training fails for the second monitor after HPD interrupt generation. The issue happens when some queued or deferred transactions are already present on the AUX channel when we initiate a new transcation to (say) get DPCD or during link training. We set AUX_IGNORE_HPD_DISCON bit in the AUX_CONTROL register so that we can ignore any such deferred transactions when a new AUX transaction is initiated. Signed-off-by: Arindam Nath <arindam.nath@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-05-05drm/core: Do not preserve framebuffer on rmfb, v4.Maarten Lankhorst
It turns out that preserving framebuffers after the rmfb call breaks vmwgfx userspace. This was originally introduced because it was thought nobody relied on the behavior, but unfortunately it seems there are exceptions. drm_framebuffer_remove may fail with -EINTR now, so a straight revert is impossible. There is no way to remove the framebuffer from the lists and active planes without introducing a race because of the different locking requirements. Instead call drm_framebuffer_remove from a workqueue, which is unaffected by signals. Changes since v1: - Add comment. Changes since v2: - Add fastpath for refcount = 1. (danvet) Changes since v3: - Rebased. - Restore lastclose framebuffer removal too. Cc: stable@vger.kernel.org #v4.4+ Fixes: 13803132818c ("drm/core: Preserve the framebuffer after removing it.") Testcase: kms_rmfb_basic References: https://lists.freedesktop.org/archives/dri-devel/2016-March/102876.html Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Thomas Hellstrom <thellstrom@vmware.com> #v3 Tested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/6c63ca37-0e7e-ac7f-a6d2-c7822e3d611f@linux.intel.com
2016-05-05drm/fb_helper: Fix a few typosLyude
s/modest/modeset/ s/aftert/after/ Signed-off-by: Lyude <cpaul@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1462375734-8213-3-git-send-email-cpaul@redhat.com
2016-05-05Merge tag 'v4.6-rc6' into x86/asm, to refresh the treeIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-05-05drm/i915/mst: use reference counted connectors. (v3)Dave Airlie
Don't just free the connector when we get the destroy callback. Drop a reference to it, and set it's mst_port to NULL so no more mst work is done on it. v2: core mst accepts NULLs fine. Cleanup EDID code properly. v3: drop the extra reference we were taking. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-05-05drm/atomic: use connector references (v3)Dave Airlie
Take a reference when setting a crtc on a connecter, also take one when duplicating if a crtc is set, and drop one on destroy if a crtc is set. v2: take Daniel Stone's advice and simplify the ref/unref dances, also take care of NULL as connector to state reset. v3: remove need for connector NULL check. Reviewed-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-05-05drm/crtc: take references to connectors used in a modeset. (v2)Dave Airlie
This just takes a reference on the connector when we set a mode in the non-atomic paths. v2: Follow Daniel Stone's suggestions on when to take/drop references. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-05-05drm/fb_helper: add connector reference counting. (v2)Dave Airlie
This takes a reference count when fbdev adds the connector, and drops it when it removes the connector. It also drops the now unneeded code to find connectors and remove the from the modeset as they are reference counted. v2: drop references when removing all connectors at end. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-05-05drm/modes: add connector reference counting. (v2)Dave Airlie
This uses the previous changes to add reference counts to drm connector objects. v2: move fbdev changes to their own patch. add some kerneldoc Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-05-05Merge tag 'drm-intel-fixes-2016-05-02' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-fixes i915 fixes for 4.6. A bit more than I'd like at this stage, but OTOH they're all stable material. * tag 'drm-intel-fixes-2016-05-02' of git://anongit.freedesktop.org/drm-intel: drm/i915: Make RPS EI/thresholds multiple of 25 on SNB-BDW drm/i915: Fake HDMI live status drm/i915: Fix eDP low vswing for Broadwell drm/i915/ddi: Fix eDP VDD handling during booting and suspend/resume drm/i915: Fix system resume if PCI device remained enabled drm/i915: Avoid stalling on pending flips for legacy cursor updates
2016-05-05Merge branch 'drm-fixes-4.6' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes two fixes for hw lockups and one for a double free * 'drm-fixes-4.6' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: make sure vertical front porch is at least 1 drm/radeon: make sure vertical front porch is at least 1 drm/amdgpu: set metadata pointer to NULL after freeing.
2016-05-05gpu: ipu-v3: Fix imx-ipuv3-crtc module autoloadingPhilipp Zabel
If of_node is set before calling platform_device_add, the driver core will try to use of: modalias matching, which fails because the device tree nodes don't have a compatible property set. This patch fixes imx-ipuv3-crtc module autoloading by setting the of_node property only after the platform modalias is set. Fixes: 304e6be652e2 ("gpu: ipu-v3: Assign of_node of child platform devices to corresponding ports") Reported-by: Dennis Gilmore <dennis@ausil.us> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-By: Dennis Gilmore <dennis@ausil.us> Cc: stable@vger.kernel.org # 4.4+ Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-05-04drm/amdgpu: Replace rcu_assign_pointer() with RCU_INIT_POINTER()Muhammad Falak R Wani
The rcu_assign_pointer() ensures that the initialization of a structure is carried out before storing a pointer to that structre. It is always safe to use RCU_INIT_POINTER() to NULL a pointer, instead of rcu_assign_pointer(). This results in slightly smaller/faster code. The following semantic patch was used: <smpl> @@ @@ - rcu_assign_pointer + RCU_INIT_POINTER (..., NULL) </smpl> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amdgpu: use drm_mode_vrefresh() rather than mode->vrefreshAlex Deucher
This is a port of radeon commit: 3d2d98ee1af0cf6eebfbd6bff4c17d3601ac1284 drm/radeon: use drm_mode_vrefresh() rather than mode->vrefresh to amdgpu. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-05-04drm/amdgpu/uvd6: add bypass support for fiji (v3)Alex Deucher
Handle uvd clock bypass settings as part of clockgating setup. v2: fix gate logic v3: fix header include Reviewed-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amdgpu/fiji: set UVD CG state when enabling UVD DPM (v2)Alex Deucher
Need to call the IP cg callbacks. v2: fix gate logic Reviewed-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/powerplay: add missing clockgating callback for tongaAlex Deucher
Without this clockgating is not enabled. Reviewed-by: Ken Wang <Qingqing.Wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amdgpu: Constify some tablesNils Wallménius
Some more tables with constant data were added with the polaris support v2: missed a few Signed-off-by: Nils Wallménius <nils.wallmenius@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/powerplay: Delete dead struct declarationNils Wallménius
Signed-off-by: Nils Wallménius <nils.wallmenius@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/powerplay/hwmgr: don't add invalid voltageMoritz Kühner
if atomctrl_get_voltage_evv_on_sclk returns non zero (fail) in the expansion of the PP_ASSERT_WITH_CODE macro the continue will actually do nothing (The macro uses a do ... while(0) as scope, which eats the continue). Based on the code I don't think this was the intent. Unfortunately fixing this requires rewriting the control flow and removing the macros. v2: added signed of by fixed error message print v3: agd: drop DRM_ERROR Signed-off-by: Moritz Kühner <kuehner.moritz@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/powerplay/hwmgr: prevent VDDC from exceeding 2VMoritz Kühner
If the tonga gpu is controlled by SVID2 tonga_get_evv_voltage will only print an error if the voltage exceeds 2V although a comment clearly states that it needs be less than 2V. v2: added signed of by Signed-off-by: Moritz Kühner <kuehner.moritz@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/radeon: add cayman VM support for append packet.Dave Airlie
This adds support for SET_APPEND_CNT packet3 to the VM paths. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/amdgpu: Add debugfs entries for smc/didt/pcieTom St Denis
This adds 3 new files that can be read/written to access indirect GPU registers. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/amdgpu: Drop print_status callbacks.Tom St Denis
First patch in series to move to user mode debug tools we're removing the print_status callbacks. These functions were unused at the moment anyway. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/powerplay: revise reading/writing pptable on Polaris10Eric Huang
Change the way we store pptables in the driver to better facilitate eventual runtime updates for debugging. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/powerplay: revise reading/writing pptable on TongaEric Huang
Change the way we store pptables in the driver to better facilitate eventual runtime updates for debugging. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/powerplay: revise reading/writing pptable on FijiEric Huang
Change the way we store pptables in the driver to better facilitate eventual runtime updates for debugging. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/powerplay: revise caching the soft pptable and add it's sizeEric Huang
This fixes a bug in the pptable access interface that could lead to a crash. Check the pointer before using it. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/powerplay: add dpm force multiple levels on cz/tonga/fiji/polaris (v2)Eric Huang
Allows you to force multiple levels rather than just one via the new sysfs interrface. v2: squash in: drm/amd/powerplay: ensure clock level set by user is valid. From Rex. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/powerplay: fix fan speed percent setting error on Polaris10Eric Huang
The logic was reversed. Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/powerplay: fix bug dpm can't work when resume back on PolarisEric Huang
Need to initialize the values to 0 since they get or'ed with additional values. If the initialization is missing, on resume, they may end up with a combination of stale data and new data. Fixes dpm on resume. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/powerplay: fix some initialize error on polaris10.Rex Zhu
1. don't enable SclkThrottleLowNotification, it's not supported. 2. Set missing mclk_dpm0_activity_target Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/powerplay: return 0 when interface not implement on some asic.Rex Zhu
Don't fail if certain optional interface callbacks are missing. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amdgpu: fix memory leak in CGS (FW info)Mykola Lysenko
Previously requested FW pointer should not be overwritten on a subsequent call. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mykola Lysenko <Mykola.Lysenko@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/powerplay: update vce power gate state for baffin.Rex Zhu
Forgot to save the current gate state so we don't know what the current state is if we try and gate/ungate the block. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/powerplay: Fix a bug for enabling ACDC gpio interruptEric Huang
Only enable it if it's supported rather than unconitionally. Signed-off-by: Eric Yang <eric.yang2@amd.com> Reviewed-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/powerplay: fix issue that get wrong reference clock value.Rex Zhu
use wrong parameter to compute the reference clock. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/powerplay: parameter updates according to SMC.Rex Zhu
Update to latest changes for SMC team. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/powerplay: add fan control mode interface for baffinRex Zhu
Add interface for manual fan control. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/powerplay: enable some feature for baffin/ellesmere. (v2)Rex Zhu
Sync up with internal updates. v2: squash in: drm/amd/powerplay: set revert flag for enable thermal protect. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amdgpu: code style refine.Rex Zhu
Whitespace fix. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/powerplay: fix copy paste error in error messageAlex Deucher
Noticed-by: Vasily Anonimov <vasily.anonimov@googlemail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/amdgpu: fix 64-bit divisionSlava Grigorev
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amdgpu: add polaris10/11 smc fw declarationFlora Cui
Signed-off-by: Flora Cui <Flora.Cui@amd.com> Reviewed-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/powerplay: Disable Spread Spectrum on DPM 0 on baffin as SPLL Shut ↵Rex Zhu
Down feature is enabled. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Acked-by: Flora Cui <Flora.Cui@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/powerplay: enable set lowest mclk clock on baffin.Rex Zhu
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/powrplay: fix issue that get wrong enable flag.Rex Zhu
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/powerplay: fix mclk in high clock for baffinRex Zhu
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amd/powerplay: print gpu loading and uvd/vce power gate enablement for ↵Rex Zhu
polaris10/11. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-05-04drm/amdgpu: change ELM/BAF to Polaris10/Polaris11Flora Cui
Adjust to preferred code names. Signed-off-by: Flora Cui <Flora.Cui@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-12 22:52:48 +0000