| Age | Commit message (Collapse) | Author |
|---|
|
According to downstream (bengal-sde.dtsi), the sm6115 uses UBWC 1.0.
Change the catalog entry accordingly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/514337/
Link: https://lore.kernel.org/r/20221207142833.204193-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Extend dpu_hw_sspp_setup_format() to also handle the UBWC 1.0 case.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/514336/
Link: https://lore.kernel.org/r/20221207142833.204193-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
On MSM8960 the HDMI PHY provides the PLL clock to the MMCC. As we are
preparing to convert the MSM8960 to use DT clocks properties (rather
than global clock names), register the OF clock provider.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/519211/
Link: https://lore.kernel.org/r/20230119132219.2479775-5-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Replace parent_names usage with parent_data. Note, that this makes the
PLL default to board's `pxo_board' clock rather than just `pxo' clock,
as we are on a way to deprecate the global cxo/pxo clocks.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/519210/
Link: https://lore.kernel.org/r/20230119132219.2479775-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Commit 622113b9f11f ("drm/ssd130x: Replace simple display helpers with the
atomic helpers") changed the driver to just use the atomic helpers instead
of the simple KMS abstraction layer.
But the commit also made a subtle change on the display power sequence and
initialization order, by moving the ssd130x_power_on() call to the encoder
.atomic_enable handler and the ssd130x_init() call to CRTC .reset handler.
Before this change, both ssd130x_power_on() and ssd130x_init() were called
in the simple display pipeline .enable handler, so the display was already
initialized by the time the SSD130X_DISPLAY_ON command was sent.
For some reasons, it only made the ssd130x SPI driver to fail but the I2C
was still working. That is the reason why the bug was not noticed before.
To revert to the old driver behavior, move the ssd130x_init() call to the
encoder .atomic_enable as well. Besides fixing the panel not being turned
on when using SPI, it also gets rid of the custom CRTC .reset callback.
Fixes: 622113b9f11f ("drm/ssd130x: Replace simple display helpers with the atomic helpers")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230125184230.3343206-1-javierm@redhat.com
|
|
dsi_mgr_bridge_mode_valid
It was left unnoticed during the review that even if there is no OPP
table in device tree, one will be created by a call to the function
devm_pm_opp_set_clkname(). This leads to dsi_mgr_bridge_mode_valid()
rejecting all modes if DT contains no OPP table for the DSI host.
Rework dsi_mgr_bridge_mode_valid() to handle this case by actually
checking that the table is populated with frequency entries before
returning an error.
Fixes: 8328041b8c82 ("drm/msm/dsi: implement opp table based check for dsi_mgr_bridge_mode_valid()")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/520076/
Link: https://lore.kernel.org/r/20230124203600.3488766-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Add missing DSC hardware block register ranges to the snapshot utility
to include them in dmesg (on MSM_DISP_SNAPSHOT_DUMP_IN_CONSOLE) and the
kms debugfs file.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/520175/
Link: https://lore.kernel.org/r/20230125101412.216924-1-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
I'm not exactly clear on what strange workflow causes people to do it,
but clearly occasionally some files end up being committed as executable
even though they clearly aren't.
This is a reprise of commit 90fda63fa115 ("treewide: fix up files
incorrectly marked executable"), just with a different set of files (but
with the same trivial shell scripting).
So apparently we need to re-do this every five years or so, and Joe
needs to just keep reminding me to do so ;)
Reported-by: Joe Perches <joe@perches.com>
Fixes: 523375c943e5 ("drm/vmwgfx: Port vmwgfx to arm64")
Fixes: 5c439937775d ("ASoC: codecs: add support for ES8326")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
GAMSTLB_CTRL and GAMCNTRL_CTRL became multicast/replicated registers on
Xe_HP. They should be defined accordingly and use MCR-aware operations.
These registers have only been used for some dg2/xehpsdv workarounds, so
this fix is mostly just for consistency/future-proofing; even lacking
the MCR annotation, workarounds will always be properly applied in a
multicast manner on these platforms.
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Fixes: 58bc2453ab8a ("drm/i915: Define multicast registers as a new type")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230125234159.3015385-3-matthew.d.roper@intel.com
|
|
Workaround Wa_18018781329 has applied to several recent Xe_HP-based
platforms. However there are some extra gotchas to implementing this
properly for MTL that we need to take into account:
* Due to the separation of media and render/compute into separate GTs,
this workaround needs to be implemented on each GT, not just the
primary GT. Since each class of register only exists on one of the
two GTs, we should program the appropriate registers on each GT.
* As with past Xe_HP platforms, the registers on the primary GT (Xe_LPG
IP) are multicast/replicated registers and should be handled with the
MCR-aware functions. However the registers on the media GT (Xe_LPM+
IP) are regular singleton registers and should _not_ use MCR
handling. We need to create separate register definitions for the
Xe_HP multicast form and the Xe_LPM+ singleton form and use each in
the appropriate place.
* Starting with MTL, workarounds documented by the hardware teams are
technically associated with IP versions/steppings rather than
top-level platforms. That means we should take care to check the
media IP version rather than the graphics IP version when deciding
whether the workaround is needed on the Xe_LPM+ media GT (in this
case the workaround applies to both IPs and the stepping bounds are
identical, but we should still write the code appropriately to set a
proper precedent for future workaround implementations).
* It's worth noting that the GSC register and the CCS register are
defined with the same MMIO offset (0xCF30). Since the CCS is only
relevant to the primary GT and the GSC is only relevant to the media
GT there isn't actually a clash here (the media GT automatically adds
the additional 0x380000 GSI offset). However there's currently a
glitch in the bspec where the CCS register doesn't show up at all and
the GSC register is listed as existing on both GTs. That's a known
documentation problem for several registers with shared GSC/CCS
offsets; rest assured that the CCS register really does still exist.
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Fixes: 41bb543f5598 ("drm/i915/mtl: Add initial gt workarounds")
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230125234159.3015385-2-matthew.d.roper@intel.com
|
|
Register reset characteristics (i.e., whether the register maintains or
loses its value on engine reset) is an important factor that determines
which wa_list we want to add workarounds to. We recently found out that
the bspec documentation for the Xe_HP's "GAM" registers in the 0xC800 -
0xCFFF range was misleading; these registers do not actually lose their
value on engine resets as the documentation implied. This means there's
no need to re-apply workarounds touching these registers after a reset,
and the corresponding workarounds should be moved from the 'engine'
lists back to the 'gt' list.
v2:
- Don't add Wa_18018781329 to xehpsdv; the original condition didn't
include that platform. (Gustavo)
- Move the MTL code to the GT function as-is for now; we'll take care
of the additional fixes needed in a follow-up patch.
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Fixes: edf176f48d87 ("drm/i915/dg2: Move misplaced 'ctx' & 'gt' wa's to engine wa list")
Fixes: b2006061ae28 ("drm/i915/xehpsdv: Move render/compute engine reset domains related workarounds")
Fixes: 41bb543f5598 ("drm/i915/mtl: Add initial gt workarounds")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230125234159.3015385-1-matthew.d.roper@intel.com
|
|
Use the RUNTIME_PM_OPS() and pm_ptr() macros to handle the
.runtime_suspend/.runtime_resume callbacks.
These macros allow the suspend and resume functions to be automatically
dropped by the compiler when CONFIG_PM is disabled, without having
to use #ifdef guards.
This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Fix the following coccicheck warning:
./drivers/gpu/drm/tegra/submit.c:689:2-7: WARNING:
NULL check before some freeing functions is not needed.
Signed-off-by: Yushan Zhou <katrinzhou@tencent.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Currently all fences have a 30 second timeout to ensure they are
cleaned up if the fence never completes otherwise. However, this
one size fits all solution doesn't actually fit in every case,
such as syncpoint waiting where we want to be able to have timeouts
longer than 30 seconds. As such, we want to be able to give control
over fence cancellation to the caller (and maybe eventually get rid
of the internal timeout altogether).
Here we add this cancellation mechanism by essentially adding a
function for entering the timeout path by function call, and changing
the syncpoint wait function to use it.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Move from the old, complex intr handling code to a new implementation
based on dma_fences. While there is a fair bit of churn to get there,
the new implementation is much simpler and likely faster as well due
to allowing signaling directly from interrupt context.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
In anticipation of removal of the intr API, implement job tracking
using DMA fences instead. The main two things about this are
making cdma_update schedule the work since fence completion can
now be called from interrupt context, and some complication in
ensuring the callback is not running when we free the fence.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
In anticipation of removal of the intr API, move host1x_syncpt_wait
to use DMA fences instead. As of this patch, this means that waits
have a 30 second maximum timeout because of the implicit timeout
we have with fences, but that will be lifted in a follow-up patch.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
In the IMM opcode check, don't call is_addr_reg if it's not set.
Fixes: 8cc95f3fd35e ("drm/tegra: Add job firewall")
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The code to write the syncpoint channel assignment register
incorrectly skips the write if hypervisor registers are not available.
The register, however, is within the guest aperture so remove the
check and assign syncpoints properly even on virtualized systems.
Fixes: c3f52220f276 ("gpu: host1x: Enable Tegra186 syncpoint protection")
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
On Tegra186+, the syncpoint ID has 10 bits of space. To allow
using more than 256 syncpoints, fix the mask.
Fixes: 9abdd497cd0a ("gpu: host1x: Tegra234 device data and headers")
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
We want to idle all tiles when exiting selftests.
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230125100003.18243-1-nirmoy.das@intel.com
|
|
The bcm2711 has two HDMI outputs, each with their own CEC adapter.
The CEC adapter name has to be unique, but it is currently
hardcoded to "vc4" for both outputs. Change this to use the card_name
from the variant information in order to make the adapter name unique.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 15b4511a4af6 ("drm/vc4: add HDMI CEC support")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/dcf1db75-d9cc-62cc-fa12-baf1b2b3bf31@xs4all.nl
|
|
Wa_14013475917 has to be applied for all MTL steppings.
Bspec: 66624
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230124102636.2567292-3-jouni.hogander@intel.com
|
|
Implement Wa_14014971492 and apply it for affected platforms.
Bspec: 52890, 54369, 55378, 66624
v2: Adjust platforms where applied
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230124102636.2567292-2-jouni.hogander@intel.com
|
|
It's a bit confusing to have two cached EDIDs in struct intel_connector
with slightly different purposes. Make the distinction a bit clearer by
moving the EDID cached for eDP and LVDS panels at connector init time to
struct intel_panel, and name it fixed_edid. That's what it is, a fixed
EDID for the panels.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/328350ef918638928a8286cdbab3107c8258332d.1674643465.git.jani.nikula@intel.com
|
|
Simplify validation and use by converting to drm_edid.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6abb01f1e97d54a3c11bec24377f035df412b492.1674643465.git.jani.nikula@intel.com
|
|
Try to use struct drm_edid where possible, even if having to fall back
to looking into struct edid down low via drm_edid_raw().
v2: Rebase
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/897807d62f74f690a173ecd405e25c6ccdd63b98.1674643465.git.jani.nikula@intel.com
|
|
Convert all the connectors that use cached connector edid and
detect_edid to drm_edid.
Since drm_get_edid() calls drm_connector_update_edid_property() while
drm_edid_read*() do not, we need to call drm_edid_connector_update()
separately, in part due to the EDID caching behaviour in HDMI and
DP. Especially DP depends on the details parsed from EDID. (The big
behavioural change conflating EDID reading with parsing and property
update was done in commit 5186421cbfe2 ("drm: Introduce epoch counter to
drm_connector"))
v6: Rebase on drm_edid_connector_add_modes()
v5: Fix potential uninitialized var use (kernel test robot <lkp@intel.com>)
v4: Call drm_edid_connector_update() after reading HDMI/DP EDID
v3: Don't leak vga switcheroo EDID in LVDS init (Ville)
v2: Don't leak opregion fallback EDID (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/eabb4de932841b38b34cc2818ea9fbf7c10224fd.1674643465.git.jani.nikula@intel.com
|
|
The generic fbdev emulation names variables of type struct fb_info
both 'fbi' and 'info'. The latter seems to be more common in fbdev
code, so name fbi accordingly.
Also replace the duplicate variable in drm_fbdev_fb_destroy().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230125200415.14123-11-tzimmermann@suse.de
|
|
The fbdev framebuffer cleanup in drm_fbdev_fb_destroy() calls
drm_fbdev_release() and drm_fbdev_cleanup(). Inline both into the
caller. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230125200415.14123-10-tzimmermann@suse.de
|
|
For uninitialized framebuffers, only release the DRM client and
free the fbdev memory. Do not attempt to clean up the framebuffer.
DRM fbdev clients have a two-step initialization: first create
the DRM client; then create the framebuffer device on the first
successful hotplug event. In cases where the client never creates
the framebuffer, only the client state needs to be released. We
can detect which case it is, full or client-only cleanup, by
looking at the presence of fb_helper's info field.
v3:
* fix typo in commit message (Javier)
* release client before unpreparing fbdev
v2:
* remove test for (fbi != NULL) in drm_fbdev_cleanup() (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230125200415.14123-9-tzimmermann@suse.de
|
|
Call drm_fb_helper_fini() in the generic-fbdev hotplug helper
to revert the effects of drm_fb_helper_init(). No full cleanup
is required.
v3:
* fix error in commit message (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230125200415.14123-8-tzimmermann@suse.de
|
|
Initialize the fb-helper's preferred_bpp field early from within
drm_fb_helper_prepare(); instead of the later client hot-plugging
callback. This simplifies the generic fbdev setup function.
No real changes, but all drivers' fbdev code has to be adapted.
v3:
* build with CONFIG_DRM_FBDEV_EMULATION unset (kernel test bot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230125200415.14123-7-tzimmermann@suse.de
|
|
Store the console's preferred BPP value in struct drm_fb_helper
and remove the respective function parameters from the internal
fbdev code.
The BPP value is only required as a fallback and will now always
be available in the fb-helper instance.
No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230125200415.14123-6-tzimmermann@suse.de
|
|
Initialize the fb-helper structure immediately after its allocation
in drm_fbdev_generic_setup(). That will make it easier to fill it with
driver-specific values, such as the preferred BPP.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230125200415.14123-5-tzimmermann@suse.de
|
|
Move the fb-helper clean-up code into drm_fb_helper_unprepare(). No
functional changes.
v2:
* declare as static inline (kernel test robot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230125200415.14123-4-tzimmermann@suse.de
|
|
Signal failed hotplugging with a flag in struct drm_client_dev. If set,
the client helpers will not further try to set up the fbdev display.
This used to be signalled with a combination of cleared pointers in
struct drm_fb_helper, which prevents us from initializing these pointers
early after allocation.
The change also harmonizes behavior among DRM clients. Additional DRM
clients will now handle failed hotplugging like fbdev does.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230125200415.14123-3-tzimmermann@suse.de
|
|
Test for connectors in the client code and remove a similar test
from the generic fbdev emulation. Do nothing if the test fails.
Not having connectors indicates a driver bug.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230125200415.14123-2-tzimmermann@suse.de
|
|
Restore the proper bridge chain by finding the previous bridge
in the chain instead of passing NULL.
This establishes a proper bridge chain while attaching downstream
bridges.
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Enable the drm bridge pre_enable_prev_first flag so that the
previous bridge pre_enable should be called first before the
pre_enable for the tc358764 bridge is called.
This makes sure that the previous bridge should be initialized
properly before the tc358764 bridge is powered up.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Enable the drm panel prepare_prev_first flag so-that the previous
controller should be prepared first before the prepare for the
panel is called.
samsung-s6e3ha2, samsung-s6e63j0x03 and samsung-s6e8aa0 are the
effected samsung-s6e panels for this change.
This makes sure that the previous controller, likely to be a DSI
host controller should be initialized to LP-11 before the panel
is powered up.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
When clang's -Qunused-arguments is dropped from KBUILD_CPPFLAGS, it
warns:
clang-16: error: argument unused during compilation: '-mhard-float' [-Werror,-Wunused-command-line-argument]
Similar to commit 84edc2eff827 ("selftest/fpu: avoid clang warning"),
just add this flag to GCC builds. Commit 0f0727d971f6 ("drm/amd/display:
readd -msse2 to prevent Clang from emitting libcalls to undefined SW FP
routines") added '-msse2' to prevent clang from emitting software
floating point routines.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The current design of callback function disable() of struct
nvkm_devinit_func is defined to return a u64 value. In its implementation
in the driver modules, the function always returns a fixed value 0. Hence
the design and implementation of this function should be enhanced to return
void instead of a fixed value. This change also eliminates untouched
return variables.
The change is identified using the returnvar.cocci Coccinelle semantic
patch script.
Signed-off-by: Deepak R Varma <drv@mailo.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y9FFoooIXjlr+UP1@ubun2204.myguest.virtualbox.org
|
|
Backmerging to sync with other DRM trees.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
[Why&How]
Switching between certain modes that are freesync video modes and those
are not freesync video modes result in timing not changing as seen by
the monitor due to incorrect timing being driven.
The issue is fixed by ensuring that when a non freesync video mode is
set, we reset the freesync status on the crtc.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why & how]
We still need to refer to port while removing payload at commit_tail.
we should keep the kref till then to release.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2171
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Fixes: 4d07b0bc4034 ("drm/display/dp_mst: Move all payload info into the atomic state")
Cc: stable@vger.kernel.org # 6.1
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Tested-by: Didier Raboud <odyx@debian.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Now the vc_start_slot is controlled at drm side. When we
service a long HPD, we still need to run
dm_helpers_dp_mst_write_payload_allocation_table() to update
drm mst_mgr's relevant variable. Otherwise, on the next plug-in,
payload will get assigned with a wrong start slot.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2171
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Fixes: 4d07b0bc4034 ("drm/display/dp_mst: Move all payload info into the atomic state")
Cc: stable@vger.kernel.org # 6.1
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Tested-by: Didier Raboud <odyx@debian.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
amdgpu expects to update payload table for one stream one time
by calling dm_helpers_dp_mst_write_payload_allocation_table().
Currently, it get modified to try to update HW payload table
at once by referring mst_state.
[How]
This is just a quick workaround. Should find way to remove the
temporary struct dc_dp_mst_stream_allocation_table later if set
struct link_mst_stream_allocatio directly is possible.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2171
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Fixes: 4d07b0bc4034 ("drm/display/dp_mst: Move all payload info into the atomic state")
Cc: stable@vger.kernel.org # 6.1
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Tested-by: Didier Raboud <odyx@debian.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Looks like I made a pretty big mistake here without noticing: it seems when
I moved the assignments of mst_state->pbn_div I completely missed the fact
that the reason for us calling drm_dp_mst_update_slots() earlier was to
account for the fact that we need to call this function using info from the
root MST connector, instead of just trying to do this from each MST
encoder's atomic check function. Otherwise, we end up filling out all of
DC's link information with zeroes.
So, let's restore that and hopefully fix this DSC regression.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2171
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Fixes: 4d07b0bc4034 ("drm/display/dp_mst: Move all payload info into the atomic state")
Cc: stable@vger.kernel.org # 6.1
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Didier Raboud <odyx@debian.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To support new mes ip block
Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
