Age | Commit message (Collapse) | Author |
|
Pull drm fixes from Dave Airlie:
"Final(?) set of fixes for 6.13, I think the holidays finally caught up
with everyone, the misc changes are 2 weeks worth, otherwise amdgpu
and xe are most of it. The largest pieces is a new test so I'm not too
worried about that.
kunit:
- Fix W=1 build for kunit tests
bridge:
- Handle YCbCr420 better in bridge code, with tests
- itee-it6263 error handling fix
amdgpu:
- SMU 13 fix
- DP MST fixes
- DCN 3.5 fix
- PSR fixes
- eDP fix
- VRR fix
- Enforce isolation fixes
- GFX 12 fix
- PSP 14.x fix
xe:
- Add steering info support for GuC register lists
- Add means to wait for reset and synchronous reset
- Make changing ccs_mode a synchronous action
- Add missing mux registers
- Mark ComputeCS read mode as UC on iGPU, unblocking ULLS on iGPU
i915:
- Relax clear color alignment to 64 bytes [fb]
v3d:
- Fix warn when unloading v3d
nouveau:
- Fix cross-device fence handling in nouveau
- Fix backlight regression for macbooks 5,1
vmwgfx:
- Fix BO reservation handling in vmwgfx"
* tag 'drm-fixes-2025-01-17' of https://gitlab.freedesktop.org/drm/kernel: (33 commits)
drm/xe: Mark ComputeCS read mode as UC on iGPU
drm/xe/oa: Add missing VISACTL mux registers
drm/xe: make change ccs_mode a synchronous action
drm/xe: introduce xe_gt_reset and xe_gt_wait_for_reset
drm/xe/guc: Adding steering info support for GuC register lists
drm/bridge: ite-it6263: Prevent error pointer dereference in probe()
drm/v3d: Ensure job pointer is set to NULL after job completion
drm/vmwgfx: Add new keep_resv BO param
drm/vmwgfx: Remove busy_places
drm/vmwgfx: Unreserve BO on error
drm/amdgpu: fix fw attestation for MP0_14_0_{2/3}
drm/amdgpu: always sync the GFX pipe on ctx switch
drm/amdgpu: disable gfxoff with the compute workload on gfx12
drm/amdgpu: Fix Circular Locking Dependency in AMDGPU GFX Isolation
drm/i915/fb: Relax clear color alignment to 64 bytes
drm/amd/display: Disable replay and psr while VRR is enabled
drm/amd/display: Fix PSR-SU not support but still call the amdgpu_dm_psr_enable
nouveau/fence: handle cross device fences properly
drm/tests: connector: Add ycbcr_420_allowed tests
drm/connector: hdmi: Validate supported_formats matches ycbcr_420_allowed
...
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Add steering info support for GuC register lists (Jesus Narvaez)
- Add means to wait for reset and synchronous reset (Maciej)
- Make changing ccs_mode a synchronous action (Maciej)
- Add missing mux registers (Ashutosh)
- Mark ComputeCS read mode as UC on iGPU, unblocking ULLS on iGPU (Matt Brost)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z4ll3F1anLEwCvrf@fedora
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Relax clear color alignment to 64 bytes [fb] (Ville Syrjälä)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z4fdIVf68qsqIpiN@linux
|
|
RING_CMD_CCTL read index should be UC on iGPU parts due to L3 caching
structure. Having this as WB blocks ULLS from being enabled. Change to
UC to unblock ULLS on iGPU.
v2:
- Drop internal communications commnet, bspec is updated
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Cc: Michal Mrozek <michal.mrozek@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: stable@vger.kernel.org
Fixes: 328e089bfb37 ("drm/xe: Leverage ComputeCS read L3 caching")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250114002507.114087-1-matthew.brost@intel.com
(cherry picked from commit 758debf35b9cda5450e40996991a6e4b222899bd)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Fix two kernel doc warnings introduced by the recent DP audio patch:
- Add a doc line for the new "audio" field
- Remove a reference to zynqmp_dpsub.c from zynqmp.rst, as the .c file
no longer has structured comments
Fixes: 3ec5c1579305 ("drm: xlnx: zynqmp_dpsub: Add DP audio support")
Closes: https://lore.kernel.org/all/20241220154208.720d990b@canb.auug.org.au/
Reviewed-by: Vishal Sagar <vishal.sagar@amd.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241220-xilinx-dp-audio-doc-fix-v1-1-cc488996e463@ideasonboard.com
(cherry picked from commit 96b5d2e807f667320c66f41ddc1c473023a73ab2)
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.13-2025-01-15:
amdgpu:
- SMU 13 fix
- DP MST fixes
- DCN 3.5 fix
- PSR fixes
- eDP fix
- VRR fix
- Enforce isolation fixes
- GFX 12 fix
- PSP 14.x fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250115151602.210704-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.13:
- itee-it6263 error handling fix.
- Fix warn when unloading v3d.
- Fix W=1 build for kunit tests.
- Fix backlight regression for macbooks 5,1 in nouveau.
- Handle YCbCr420 better in bridge code, with tests.
- Fix cross-device fence handling in nouveau.
- Fix BO reservation handling in vmwgfx.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a89adcd5-2042-4e7f-93f4-2b299bb1ef17@linux.intel.com
|
|
Add missing VISACTL mux registers required for some OA
config's (e.g. RenderPipeCtrl).
Fixes: cdf02fe1a94a ("drm/xe/oa/uapi: Add/remove OA config perf ops")
Cc: stable@vger.kernel.org
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250111021539.2920346-1-ashutosh.dixit@intel.com
(cherry picked from commit c26f22dac3449d8a687237cdfc59a6445eb8f75a)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
If ccs_mode is being modified via
/sys/class/drm/cardX/device/tileY/gtY/ccs_mode
the asynchronous reset is triggered and the write returns immediately.
With that some test receive false information about number of CCS engines
or even fail if they proceed without delay after changing the ccs_mode.
Changing the ccs_mode change from async to sync to prevent failures in
tests.
Signed-off-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Fixes: f3bc5bb4d53d ("drm/xe: Allow userspace to configure CCS mode")
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211111727.1481476-3-maciej.patelczyk@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
(cherry picked from commit 480fb9806e2e073532f7786166287114c696b340)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Add synchronous version gt reset as there are few places where it
is expected.
Also add a wait helper to wait until gt reset is done.
Signed-off-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Fixes: f3bc5bb4d53d ("drm/xe: Allow userspace to configure CCS mode")
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211111727.1481476-2-maciej.patelczyk@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
(cherry picked from commit 155c77f45f63dd58a37eeb0896b0b140ab785836)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
The guc_mmio_reg interface supports steering, but it is currently not
implemented. This will allow the GuC to control steering of MMIO
registers after save-restore and avoid reading from fused off MCR
register instances.
Fixes: 9c57bc08652a ("drm/xe/lnl: Drop force_probe requirement")
Signed-off-by: Jesus Narvaez <jesus.narvaez@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241212190100.3768068-1-jesus.narvaez@intel.com
(cherry picked from commit ee5a1321df90891d59d83b7c9d5b6c5b755d059d)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
If devm_i2c_new_dummy_device() fails then we were supposed to return an
error code, but instead the function continues and will crash on the next
line. Add the missing return statement.
Fixes: 049723628716 ("drm/bridge: Add ITE IT6263 LVDS to HDMI converter")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://patchwork.freedesktop.org/patch/msgid/804a758b-f2e7-4116-b72d-29bc8905beed@stanley.mountain
|
|
After a job completes, the corresponding pointer in the device must
be set to NULL. Failing to do so triggers a warning when unloading
the driver, as it appears the job is still active. To prevent this,
assign the job pointer to NULL after completing the job, indicating
the job has finished.
Fixes: 14d1d1908696 ("drm/v3d: Remove the bad signaled() implementation.")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250113154741.67520-1-mcanal@igalia.com
|
|
Adds a new BO param that keeps the reservation locked after creation.
This removes the need to re-reserve the BO after creation which is a
waste of cycles.
This also fixes a bug in vmw_prime_import_sg_table where the imported
reservation is unlocked twice.
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Fixes: b32233acceff ("drm/vmwgfx: Fix prime import/export")
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250110185335.15301-1-ian.forbes@broadcom.com
|
|
Unused since commit a78a8da51b36
("drm/ttm: replace busy placement with flags v6")
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Reviewed-by: Martin Krastev <martin.krastev@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250108201355.2521070-1-ian.forbes@broadcom.com
|
|
Unlock BOs in reverse order.
Add an acquire context so that lockdep doesn't complain.
Fixes: d6667f0ddf46 ("drm/vmwgfx: Fix handling of dumb buffers")
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210195535.2074918-1-ian.forbes@broadcom.com
|
|
The recently introduced hotplug event handler in the HDMI Connector
framework attempts to unconditionally read the EDID data, leading to a
bunch of non-harmful, yet quite annoying DDC/I2C related errors being
reported.
Ensure the operation is done only for connectors having the status
connected or unknown. Additionally, perform an explicit reset of the
connector information when dealing with a disconnected status.
Fixes: ab716b74dc9d ("drm/display/hdmi: implement hotplug functions")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250113-hdmi-conn-edid-read-fix-v2-1-d2a0438a44ab@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Atomic check should succeed when disabling a connector. Add a test
case drm_test_check_disabling_connector() to make sure of this.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250110084821.3239518-3-victor.liu@nxp.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
It's ok to pass atomic check successfully if an atomic commit tries to
disable the display pipeline which the connector belongs to. That is,
when the crtc or the best_encoder pointers in struct drm_connector_state
are NULL, drm_atomic_helper_connector_hdmi_check() should return 0.
Without the check against the NULL pointers, drm_default_rgb_quant_range()
called by drm_atomic_helper_connector_hdmi_check() would dereference
the NULL pointer to_match in drm_match_cea_mode().
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Call trace:
drm_default_rgb_quant_range+0x0/0x4c (P)
drm_bridge_connector_atomic_check+0x20/0x2c
drm_atomic_helper_check_modeset+0x488/0xc78
drm_atomic_helper_check+0x20/0xa4
drm_atomic_check_only+0x4b8/0x984
drm_atomic_commit+0x48/0xc4
drm_framebuffer_remove+0x44c/0x530
drm_mode_rmfb_work_fn+0x7c/0xa0
process_one_work+0x150/0x294
worker_thread+0x2dc/0x3dc
kthread+0x130/0x204
ret_from_fork+0x10/0x20
Fixes: 8ec116ff21a9 ("drm/display: bridge_connector: provide atomic_check for HDMI bridges")
Fixes: 84e541b1e58e ("drm/sun4i: use drm_atomic_helper_connector_hdmi_check()")
Fixes: 65548c8ff0ab ("drm/rockchip: inno_hdmi: Switch to HDMI connector")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250110084821.3239518-2-victor.liu@nxp.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
FW attestation was disabled on MP0_14_0_{2/3}.
V2:
Move check into is_fw_attestation_support func. (Frank)
Remove DRM_WARN log info. (Alex)
Fix format. (Christian)
Signed-off-by: Gui Chengming <Jack.Gui@amd.com>
Reviewed-by: Frank.Min <Frank.Min@amd.com>
Reviewed-by: Christian König <Christian.Koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 62952a38d9bcf357d5ffc97615c48b12c9cd627c)
Cc: stable@vger.kernel.org # 6.12.x
|
|
That is needed to enforce isolation between contexts.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit def59436fb0d3ca0f211d14873d0273d69ebb405)
Cc: stable@vger.kernel.org
|
|
Disable gfxoff with the compute workload on gfx12. This is a
workaround for the opencl test failure.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2affe2bbc997b3920045c2c434e480c81a5f9707)
Cc: stable@vger.kernel.org # 6.12.x
|
|
This commit addresses a circular locking dependency issue within the GFX
isolation mechanism. The problem was identified by a warning indicating
a potential deadlock due to inconsistent lock acquisition order.
- The `amdgpu_gfx_enforce_isolation_ring_begin_use` and
`amdgpu_gfx_enforce_isolation_ring_end_use` functions previously
acquired `enforce_isolation_mutex` and called `amdgpu_gfx_kfd_sch_ctrl`,
leading to potential deadlocks. ie., If `amdgpu_gfx_kfd_sch_ctrl` is
called while `enforce_isolation_mutex` is held, and
`amdgpu_gfx_enforce_isolation_handler` is called while `kfd_sch_mutex` is
held, it can create a circular dependency.
By ensuring consistent lock usage, this fix resolves the issue:
[ 606.297333] ======================================================
[ 606.297343] WARNING: possible circular locking dependency detected
[ 606.297353] 6.10.0-amd-mlkd-610-311224-lof #19 Tainted: G OE
[ 606.297365] ------------------------------------------------------
[ 606.297375] kworker/u96:3/3825 is trying to acquire lock:
[ 606.297385] ffff9aa64e431cb8 ((work_completion)(&(&adev->gfx.enforce_isolation[i].work)->work)){+.+.}-{0:0}, at: __flush_work+0x232/0x610
[ 606.297413]
but task is already holding lock:
[ 606.297423] ffff9aa64e432338 (&adev->gfx.kfd_sch_mutex){+.+.}-{3:3}, at: amdgpu_gfx_kfd_sch_ctrl+0x51/0x4d0 [amdgpu]
[ 606.297725]
which lock already depends on the new lock.
[ 606.297738]
the existing dependency chain (in reverse order) is:
[ 606.297749]
-> #2 (&adev->gfx.kfd_sch_mutex){+.+.}-{3:3}:
[ 606.297765] __mutex_lock+0x85/0x930
[ 606.297776] mutex_lock_nested+0x1b/0x30
[ 606.297786] amdgpu_gfx_kfd_sch_ctrl+0x51/0x4d0 [amdgpu]
[ 606.298007] amdgpu_gfx_enforce_isolation_ring_begin_use+0x2a4/0x5d0 [amdgpu]
[ 606.298225] amdgpu_ring_alloc+0x48/0x70 [amdgpu]
[ 606.298412] amdgpu_ib_schedule+0x176/0x8a0 [amdgpu]
[ 606.298603] amdgpu_job_run+0xac/0x1e0 [amdgpu]
[ 606.298866] drm_sched_run_job_work+0x24f/0x430 [gpu_sched]
[ 606.298880] process_one_work+0x21e/0x680
[ 606.298890] worker_thread+0x190/0x350
[ 606.298899] kthread+0xe7/0x120
[ 606.298908] ret_from_fork+0x3c/0x60
[ 606.298919] ret_from_fork_asm+0x1a/0x30
[ 606.298929]
-> #1 (&adev->enforce_isolation_mutex){+.+.}-{3:3}:
[ 606.298947] __mutex_lock+0x85/0x930
[ 606.298956] mutex_lock_nested+0x1b/0x30
[ 606.298966] amdgpu_gfx_enforce_isolation_handler+0x87/0x370 [amdgpu]
[ 606.299190] process_one_work+0x21e/0x680
[ 606.299199] worker_thread+0x190/0x350
[ 606.299208] kthread+0xe7/0x120
[ 606.299217] ret_from_fork+0x3c/0x60
[ 606.299227] ret_from_fork_asm+0x1a/0x30
[ 606.299236]
-> #0 ((work_completion)(&(&adev->gfx.enforce_isolation[i].work)->work)){+.+.}-{0:0}:
[ 606.299257] __lock_acquire+0x16f9/0x2810
[ 606.299267] lock_acquire+0xd1/0x300
[ 606.299276] __flush_work+0x250/0x610
[ 606.299286] cancel_delayed_work_sync+0x71/0x80
[ 606.299296] amdgpu_gfx_kfd_sch_ctrl+0x287/0x4d0 [amdgpu]
[ 606.299509] amdgpu_gfx_enforce_isolation_ring_begin_use+0x2a4/0x5d0 [amdgpu]
[ 606.299723] amdgpu_ring_alloc+0x48/0x70 [amdgpu]
[ 606.299909] amdgpu_ib_schedule+0x176/0x8a0 [amdgpu]
[ 606.300101] amdgpu_job_run+0xac/0x1e0 [amdgpu]
[ 606.300355] drm_sched_run_job_work+0x24f/0x430 [gpu_sched]
[ 606.300369] process_one_work+0x21e/0x680
[ 606.300378] worker_thread+0x190/0x350
[ 606.300387] kthread+0xe7/0x120
[ 606.300396] ret_from_fork+0x3c/0x60
[ 606.300406] ret_from_fork_asm+0x1a/0x30
[ 606.300416]
other info that might help us debug this:
[ 606.300428] Chain exists of:
(work_completion)(&(&adev->gfx.enforce_isolation[i].work)->work) --> &adev->enforce_isolation_mutex --> &adev->gfx.kfd_sch_mutex
[ 606.300458] Possible unsafe locking scenario:
[ 606.300468] CPU0 CPU1
[ 606.300476] ---- ----
[ 606.300484] lock(&adev->gfx.kfd_sch_mutex);
[ 606.300494] lock(&adev->enforce_isolation_mutex);
[ 606.300508] lock(&adev->gfx.kfd_sch_mutex);
[ 606.300521] lock((work_completion)(&(&adev->gfx.enforce_isolation[i].work)->work));
[ 606.300536]
*** DEADLOCK ***
[ 606.300546] 5 locks held by kworker/u96:3/3825:
[ 606.300555] #0: ffff9aa5aa1f5d58 ((wq_completion)comp_1.1.0){+.+.}-{0:0}, at: process_one_work+0x3f5/0x680
[ 606.300577] #1: ffffaa53c3c97e40 ((work_completion)(&sched->work_run_job)){+.+.}-{0:0}, at: process_one_work+0x1d6/0x680
[ 606.300600] #2: ffff9aa64e463c98 (&adev->enforce_isolation_mutex){+.+.}-{3:3}, at: amdgpu_gfx_enforce_isolation_ring_begin_use+0x1c3/0x5d0 [amdgpu]
[ 606.300837] #3: ffff9aa64e432338 (&adev->gfx.kfd_sch_mutex){+.+.}-{3:3}, at: amdgpu_gfx_kfd_sch_ctrl+0x51/0x4d0 [amdgpu]
[ 606.301062] #4: ffffffff8c1a5660 (rcu_read_lock){....}-{1:2}, at: __flush_work+0x70/0x610
[ 606.301083]
stack backtrace:
[ 606.301092] CPU: 14 PID: 3825 Comm: kworker/u96:3 Tainted: G OE 6.10.0-amd-mlkd-610-311224-lof #19
[ 606.301109] Hardware name: Gigabyte Technology Co., Ltd. X570S GAMING X/X570S GAMING X, BIOS F7 03/22/2024
[ 606.301124] Workqueue: comp_1.1.0 drm_sched_run_job_work [gpu_sched]
[ 606.301140] Call Trace:
[ 606.301146] <TASK>
[ 606.301154] dump_stack_lvl+0x9b/0xf0
[ 606.301166] dump_stack+0x10/0x20
[ 606.301175] print_circular_bug+0x26c/0x340
[ 606.301187] check_noncircular+0x157/0x170
[ 606.301197] ? register_lock_class+0x48/0x490
[ 606.301213] __lock_acquire+0x16f9/0x2810
[ 606.301230] lock_acquire+0xd1/0x300
[ 606.301239] ? __flush_work+0x232/0x610
[ 606.301250] ? srso_alias_return_thunk+0x5/0xfbef5
[ 606.301261] ? mark_held_locks+0x54/0x90
[ 606.301274] ? __flush_work+0x232/0x610
[ 606.301284] __flush_work+0x250/0x610
[ 606.301293] ? __flush_work+0x232/0x610
[ 606.301305] ? __pfx_wq_barrier_func+0x10/0x10
[ 606.301318] ? mark_held_locks+0x54/0x90
[ 606.301331] ? srso_alias_return_thunk+0x5/0xfbef5
[ 606.301345] cancel_delayed_work_sync+0x71/0x80
[ 606.301356] amdgpu_gfx_kfd_sch_ctrl+0x287/0x4d0 [amdgpu]
[ 606.301661] amdgpu_gfx_enforce_isolation_ring_begin_use+0x2a4/0x5d0 [amdgpu]
[ 606.302050] ? srso_alias_return_thunk+0x5/0xfbef5
[ 606.302069] amdgpu_ring_alloc+0x48/0x70 [amdgpu]
[ 606.302452] amdgpu_ib_schedule+0x176/0x8a0 [amdgpu]
[ 606.302862] ? drm_sched_entity_error+0x82/0x190 [gpu_sched]
[ 606.302890] amdgpu_job_run+0xac/0x1e0 [amdgpu]
[ 606.303366] drm_sched_run_job_work+0x24f/0x430 [gpu_sched]
[ 606.303388] process_one_work+0x21e/0x680
[ 606.303409] worker_thread+0x190/0x350
[ 606.303424] ? __pfx_worker_thread+0x10/0x10
[ 606.303437] kthread+0xe7/0x120
[ 606.303449] ? __pfx_kthread+0x10/0x10
[ 606.303463] ret_from_fork+0x3c/0x60
[ 606.303476] ? __pfx_kthread+0x10/0x10
[ 606.303489] ret_from_fork_asm+0x1a/0x30
[ 606.303512] </TASK>
v2: Refactor lock handling to resolve circular dependency (Alex)
- Introduced a `sched_work` flag to defer the call to
`amdgpu_gfx_kfd_sch_ctrl` until after releasing
`enforce_isolation_mutex`.
- This change ensures that `amdgpu_gfx_kfd_sch_ctrl` is called outside
the critical section, preventing the circular dependency and deadlock.
- The `sched_work` flag is set within the mutex-protected section if
conditions are met, and the actual function call is made afterward.
- This approach ensures consistent lock acquisition order.
Fixes: afefd6f24502 ("drm/amdgpu: Implement Enforce Isolation Handler for KGD/KFD serialization")
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0b6b2dd38336d5fd49214f0e4e6495e658e3ab44)
Cc: stable@vger.kernel.org
|
|
This commit enables the cleaner shader feature for GFX12.0 and GFX12.0.1
GPUs. The cleaner shader is important for clearing GPU resources such as
Local Data Share (LDS), Vector General Purpose Registers (VGPRs), and
Scalar General Purpose Registers (SGPRs) between workloads.
- This feature ensures that GPU resources are reset between workloads,
preventing data leaks and ensuring accurate computation.
By enabling the cleaner shader, this update enhances the security and
reliability of GPU operations on GFX12.0 hardware.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Mark options only meant to be used for debugging as unsafe so that the
kernel is tainted when they are used.
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
FW attestation was disabled on MP0_14_0_{2/3}.
V2:
Move check into is_fw_attestation_support func. (Frank)
Remove DRM_WARN log info. (Alex)
Fix format. (Christian)
Signed-off-by: Gui Chengming <Jack.Gui@amd.com>
Reviewed-by: Frank.Min <Frank.Min@amd.com>
Reviewed-by: Christian König <Christian.Koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
That is needed to enforce isolation between contexts.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We sometimes have people trying to use debugging options in production
environments.
Mark options only meant to be used for debugging as unsafe so that the
kernel is tainted when they are used.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Lets use the existing helper instead of peeking into the structure
directly.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Disable gfxoff with the compute workload on gfx12. This is a
workaround for the opencl test failure.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This commit addresses a circular locking dependency issue within the GFX
isolation mechanism. The problem was identified by a warning indicating
a potential deadlock due to inconsistent lock acquisition order.
- The `amdgpu_gfx_enforce_isolation_ring_begin_use` and
`amdgpu_gfx_enforce_isolation_ring_end_use` functions previously
acquired `enforce_isolation_mutex` and called `amdgpu_gfx_kfd_sch_ctrl`,
leading to potential deadlocks. ie., If `amdgpu_gfx_kfd_sch_ctrl` is
called while `enforce_isolation_mutex` is held, and
`amdgpu_gfx_enforce_isolation_handler` is called while `kfd_sch_mutex` is
held, it can create a circular dependency.
By ensuring consistent lock usage, this fix resolves the issue:
[ 606.297333] ======================================================
[ 606.297343] WARNING: possible circular locking dependency detected
[ 606.297353] 6.10.0-amd-mlkd-610-311224-lof #19 Tainted: G OE
[ 606.297365] ------------------------------------------------------
[ 606.297375] kworker/u96:3/3825 is trying to acquire lock:
[ 606.297385] ffff9aa64e431cb8 ((work_completion)(&(&adev->gfx.enforce_isolation[i].work)->work)){+.+.}-{0:0}, at: __flush_work+0x232/0x610
[ 606.297413]
but task is already holding lock:
[ 606.297423] ffff9aa64e432338 (&adev->gfx.kfd_sch_mutex){+.+.}-{3:3}, at: amdgpu_gfx_kfd_sch_ctrl+0x51/0x4d0 [amdgpu]
[ 606.297725]
which lock already depends on the new lock.
[ 606.297738]
the existing dependency chain (in reverse order) is:
[ 606.297749]
-> #2 (&adev->gfx.kfd_sch_mutex){+.+.}-{3:3}:
[ 606.297765] __mutex_lock+0x85/0x930
[ 606.297776] mutex_lock_nested+0x1b/0x30
[ 606.297786] amdgpu_gfx_kfd_sch_ctrl+0x51/0x4d0 [amdgpu]
[ 606.298007] amdgpu_gfx_enforce_isolation_ring_begin_use+0x2a4/0x5d0 [amdgpu]
[ 606.298225] amdgpu_ring_alloc+0x48/0x70 [amdgpu]
[ 606.298412] amdgpu_ib_schedule+0x176/0x8a0 [amdgpu]
[ 606.298603] amdgpu_job_run+0xac/0x1e0 [amdgpu]
[ 606.298866] drm_sched_run_job_work+0x24f/0x430 [gpu_sched]
[ 606.298880] process_one_work+0x21e/0x680
[ 606.298890] worker_thread+0x190/0x350
[ 606.298899] kthread+0xe7/0x120
[ 606.298908] ret_from_fork+0x3c/0x60
[ 606.298919] ret_from_fork_asm+0x1a/0x30
[ 606.298929]
-> #1 (&adev->enforce_isolation_mutex){+.+.}-{3:3}:
[ 606.298947] __mutex_lock+0x85/0x930
[ 606.298956] mutex_lock_nested+0x1b/0x30
[ 606.298966] amdgpu_gfx_enforce_isolation_handler+0x87/0x370 [amdgpu]
[ 606.299190] process_one_work+0x21e/0x680
[ 606.299199] worker_thread+0x190/0x350
[ 606.299208] kthread+0xe7/0x120
[ 606.299217] ret_from_fork+0x3c/0x60
[ 606.299227] ret_from_fork_asm+0x1a/0x30
[ 606.299236]
-> #0 ((work_completion)(&(&adev->gfx.enforce_isolation[i].work)->work)){+.+.}-{0:0}:
[ 606.299257] __lock_acquire+0x16f9/0x2810
[ 606.299267] lock_acquire+0xd1/0x300
[ 606.299276] __flush_work+0x250/0x610
[ 606.299286] cancel_delayed_work_sync+0x71/0x80
[ 606.299296] amdgpu_gfx_kfd_sch_ctrl+0x287/0x4d0 [amdgpu]
[ 606.299509] amdgpu_gfx_enforce_isolation_ring_begin_use+0x2a4/0x5d0 [amdgpu]
[ 606.299723] amdgpu_ring_alloc+0x48/0x70 [amdgpu]
[ 606.299909] amdgpu_ib_schedule+0x176/0x8a0 [amdgpu]
[ 606.300101] amdgpu_job_run+0xac/0x1e0 [amdgpu]
[ 606.300355] drm_sched_run_job_work+0x24f/0x430 [gpu_sched]
[ 606.300369] process_one_work+0x21e/0x680
[ 606.300378] worker_thread+0x190/0x350
[ 606.300387] kthread+0xe7/0x120
[ 606.300396] ret_from_fork+0x3c/0x60
[ 606.300406] ret_from_fork_asm+0x1a/0x30
[ 606.300416]
other info that might help us debug this:
[ 606.300428] Chain exists of:
(work_completion)(&(&adev->gfx.enforce_isolation[i].work)->work) --> &adev->enforce_isolation_mutex --> &adev->gfx.kfd_sch_mutex
[ 606.300458] Possible unsafe locking scenario:
[ 606.300468] CPU0 CPU1
[ 606.300476] ---- ----
[ 606.300484] lock(&adev->gfx.kfd_sch_mutex);
[ 606.300494] lock(&adev->enforce_isolation_mutex);
[ 606.300508] lock(&adev->gfx.kfd_sch_mutex);
[ 606.300521] lock((work_completion)(&(&adev->gfx.enforce_isolation[i].work)->work));
[ 606.300536]
*** DEADLOCK ***
[ 606.300546] 5 locks held by kworker/u96:3/3825:
[ 606.300555] #0: ffff9aa5aa1f5d58 ((wq_completion)comp_1.1.0){+.+.}-{0:0}, at: process_one_work+0x3f5/0x680
[ 606.300577] #1: ffffaa53c3c97e40 ((work_completion)(&sched->work_run_job)){+.+.}-{0:0}, at: process_one_work+0x1d6/0x680
[ 606.300600] #2: ffff9aa64e463c98 (&adev->enforce_isolation_mutex){+.+.}-{3:3}, at: amdgpu_gfx_enforce_isolation_ring_begin_use+0x1c3/0x5d0 [amdgpu]
[ 606.300837] #3: ffff9aa64e432338 (&adev->gfx.kfd_sch_mutex){+.+.}-{3:3}, at: amdgpu_gfx_kfd_sch_ctrl+0x51/0x4d0 [amdgpu]
[ 606.301062] #4: ffffffff8c1a5660 (rcu_read_lock){....}-{1:2}, at: __flush_work+0x70/0x610
[ 606.301083]
stack backtrace:
[ 606.301092] CPU: 14 PID: 3825 Comm: kworker/u96:3 Tainted: G OE 6.10.0-amd-mlkd-610-311224-lof #19
[ 606.301109] Hardware name: Gigabyte Technology Co., Ltd. X570S GAMING X/X570S GAMING X, BIOS F7 03/22/2024
[ 606.301124] Workqueue: comp_1.1.0 drm_sched_run_job_work [gpu_sched]
[ 606.301140] Call Trace:
[ 606.301146] <TASK>
[ 606.301154] dump_stack_lvl+0x9b/0xf0
[ 606.301166] dump_stack+0x10/0x20
[ 606.301175] print_circular_bug+0x26c/0x340
[ 606.301187] check_noncircular+0x157/0x170
[ 606.301197] ? register_lock_class+0x48/0x490
[ 606.301213] __lock_acquire+0x16f9/0x2810
[ 606.301230] lock_acquire+0xd1/0x300
[ 606.301239] ? __flush_work+0x232/0x610
[ 606.301250] ? srso_alias_return_thunk+0x5/0xfbef5
[ 606.301261] ? mark_held_locks+0x54/0x90
[ 606.301274] ? __flush_work+0x232/0x610
[ 606.301284] __flush_work+0x250/0x610
[ 606.301293] ? __flush_work+0x232/0x610
[ 606.301305] ? __pfx_wq_barrier_func+0x10/0x10
[ 606.301318] ? mark_held_locks+0x54/0x90
[ 606.301331] ? srso_alias_return_thunk+0x5/0xfbef5
[ 606.301345] cancel_delayed_work_sync+0x71/0x80
[ 606.301356] amdgpu_gfx_kfd_sch_ctrl+0x287/0x4d0 [amdgpu]
[ 606.301661] amdgpu_gfx_enforce_isolation_ring_begin_use+0x2a4/0x5d0 [amdgpu]
[ 606.302050] ? srso_alias_return_thunk+0x5/0xfbef5
[ 606.302069] amdgpu_ring_alloc+0x48/0x70 [amdgpu]
[ 606.302452] amdgpu_ib_schedule+0x176/0x8a0 [amdgpu]
[ 606.302862] ? drm_sched_entity_error+0x82/0x190 [gpu_sched]
[ 606.302890] amdgpu_job_run+0xac/0x1e0 [amdgpu]
[ 606.303366] drm_sched_run_job_work+0x24f/0x430 [gpu_sched]
[ 606.303388] process_one_work+0x21e/0x680
[ 606.303409] worker_thread+0x190/0x350
[ 606.303424] ? __pfx_worker_thread+0x10/0x10
[ 606.303437] kthread+0xe7/0x120
[ 606.303449] ? __pfx_kthread+0x10/0x10
[ 606.303463] ret_from_fork+0x3c/0x60
[ 606.303476] ? __pfx_kthread+0x10/0x10
[ 606.303489] ret_from_fork_asm+0x1a/0x30
[ 606.303512] </TASK>
v2: Refactor lock handling to resolve circular dependency (Alex)
- Introduced a `sched_work` flag to defer the call to
`amdgpu_gfx_kfd_sch_ctrl` until after releasing
`enforce_isolation_mutex`.
- This change ensures that `amdgpu_gfx_kfd_sch_ctrl` is called outside
the critical section, preventing the circular dependency and deadlock.
- The `sched_work` flag is set within the mutex-protected section if
conditions are met, and the actual function call is made afterward.
- This approach ensures consistent lock acquisition order.
Fixes: afefd6f24502 ("drm/amdgpu: Implement Enforce Isolation Handler for KGD/KFD serialization")
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Mesa changed its clear color alignment from 4k to 64 bytes
without informing the kernel side about the change. This
is now likely to cause framebuffer creation to fail.
The only thing we do with the clear color buffer in i915 is:
1. map a single page
2. read out bytes 16-23 from said page
3. unmap the page
So the only requirement we really have is that those 8 bytes
are all contained within one page. Thus we can deal with the
Mesa regression by reducing the alignment requiment from 4k
to the same 64 bytes in the kernel. We could even go as low as
32 bytes, but IIRC 64 bytes is the hardware requirement on
the 3D engine side so matching that seems sensible.
Note that the Mesa alignment chages were partially undone
so the regression itself was already fixed on userspace
side.
Cc: stable@vger.kernel.org
Cc: Sagar Ghuge <sagar.ghuge@intel.com>
Cc: Nanley Chery <nanley.g.chery@intel.com>
Reported-by: Xi Ruoyao <xry111@xry111.site>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13057
Closes: https://lore.kernel.org/all/45a5bba8de009347262d86a4acb27169d9ae0d9f.camel@xry111.site/
Link: https://gitlab.freedesktop.org/mesa/mesa/-/commit/17f97a69c13832a6c1b0b3aad45b06f07d4b852f
Link: https://gitlab.freedesktop.org/mesa/mesa/-/commit/888f63cf1baf34bc95e847a30a041dc7798edddb
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241129065014.8363-2-ville.syrjala@linux.intel.com
Tested-by: Xi Ruoyao <xry111@xry111.site>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit ed3a892e5e3d6b3f6eeb76db7c92a968aeb52f3d)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
|
|
Commit c6a837088bed ("drm/amd/display: Fetch the EDID from _DDC if
available for eDP") added function dm_helpers_probe_acpi_edid(), which
fetches the EDID from the BIOS by calling acpi_video_get_edid().
acpi_video_get_edid() returns a pointer to the EDID, but this pointer
does not originate from kmalloc() - it is actually the internal
"pointer" field from an acpi_buffer struct (which did come from
kmalloc()).
dm_helpers_probe_acpi_edid() then attempts to kfree() the EDID pointer,
resulting in memory corruption which leads to random, intermittent
crashes (e.g. 4% of boots will fail with some Oops).
Fix this by allocating a new array (which can be safely freed) for the
EDID data, and correctly freeing the acpi_buffer pointer.
The only other caller of acpi_video_get_edid() is nouveau_acpi_edid():
remove the extraneous kmemdup() here as the EDID data is now copied in
acpi_video_device_EDID().
Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Fixes: c6a837088bed ("drm/amd/display: Fetch the EDID from _DDC if available for eDP")
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reported-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Closes: https://lore.kernel.org/amd-gfx/20250110175252.GBZ4FedNKqmBRaY4T3@fat_crate.local/T/#m324a23eb4c4c32fa7e89e31f8ba96c781e496fb1
Link: https://patch.msgid.link/Z4K_oQL7eA9Owkbs@debian.local
[ rjw: Changed function description comment into a kerneldoc one ]
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
[Why]
Replay and PSR will cause some video corruption while VRR is enabled.
[How]
1. Disable the Replay and PSR while VRR is enabled.
2. Change the amdgpu_dm_crtc_vrr_active() parameter to const.
Because the function will only read data from dm_crtc_state.
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d7879340e987b3056b8ae39db255b6c19c170a0d)
Cc: stable@vger.kernel.org
|
|
[Why]
The enum DC_PSR_VERSION_SU_1 of psr_version is 1 and
DC_PSR_VERSION_UNSUPPORTED is 0xFFFFFFFF.
The original code may has chance trigger the amdgpu_dm_psr_enable()
while psr version is set to DC_PSR_VERSION_UNSUPPORTED.
[How]
Modify the condition to psr->psr_version == DC_PSR_VERSION_SU_1
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f765e7ce0417f8dc38479b4b495047c397c16902)
Cc: stable@vger.kernel.org
|
|
The fence sync logic doesn't handle a fence sync across devices
as it tries to write to a channel offset from one device into
the fence bo from a different device, which won't work so well.
This patch fixes that to avoid using the sync path in the case
where the fences come from different nouveau drm devices.
This works fine on a single device as the fence bo is shared
across the devices, and mapped into each channels vma space,
the channel offsets are therefore okay to pass between sides,
so one channel can sync on the seqnos from the other by using
the offset into it's vma.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ben Skeggs <bskeggs@nvidia.com>
[ Fix compilation issue; remove version log from commit messsage.
- Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250109005553.623947-1-airlied@gmail.com
|
|
Extend HDMI connector output format tests to verify its registration
succeeds only when the presence of YUV420 in the supported formats
matches the state of ycbcr_420_allowed flag.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-bridge-conn-fmt-prio-v4-4-a9ceb5671379@collabora.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Ensure HDMI connector initialization fails when the presence of
HDMI_COLORSPACE_YUV420 in the given supported_formats bitmask doesn't
match the value of drm_connector->ycbcr_420_allowed.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-bridge-conn-fmt-prio-v4-3-a9ceb5671379@collabora.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
The case of having an HDMI bridge in the pipeline which advertises
YUV420 capability via its ->supported_formats and a non-HDMI one that
didn't enable ->ycbcr_420_allowed, is incorrectly handled because
supported_formats is passed as is to the helper initializing the HDMI
connector.
Ensure HDMI_COLORSPACE_YUV420 is removed from the bitmask passed to
drmm_connector_hdmi_init() when connector's ->ycbcr_420_allowed flag
ends up not being set.
Fixes: 3ced1c687512 ("drm/display: bridge_connector: handle ycbcr_420_allowed")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-bridge-conn-fmt-prio-v4-2-a9ceb5671379@collabora.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Bridges having DRM_BRIDGE_OP_HDMI set in their ->ops are supposed to
rely on the ->supported_formats bitmask to advertise the permitted
colorspaces, including HDMI_COLORSPACE_YUV420.
However, a new flag ->ycbcr_420_allowed has been recently introduced,
which brings the necessity to require redundant and potentially
inconsistent information to be provided on HDMI bridges initialization.
Adjust ->ycbcr_420_allowed for HDMI bridges according to
->supported_formats, right before adding them to the global bridge list.
This keeps the initialization process straightforward and unambiguous,
thereby preventing any further confusion.
Fixes: 3ced1c687512 ("drm/display: bridge_connector: handle ycbcr_420_allowed")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-bridge-conn-fmt-prio-v4-1-a9ceb5671379@collabora.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
We need the debugfs / driver-core fixes in here as well for testing and
to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since task->comm is guaranteed to be NUL-terminated, we can print it
directly without the need to copy it into a separate buffer. This
simplifies the code and avoids unnecessary operations.
Link: https://lkml.kernel.org/r/20241219023452.69907-6-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org> (For tty)
Reviewed-by: Lyude Paul <lyude@redhat.com> (For nouveau)
Cc: Oded Gabbay <ogabbay@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: "André Almeida" <andrealmeid@igalia.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vineet Gupta <vgupta@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies to avoid the multiplication.
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@@ constant C; @@
- msecs_to_jiffies(C * 1000)
+ secs_to_jiffies(C)
@@ constant C; @@
- msecs_to_jiffies(C * MSEC_PER_SEC)
+ secs_to_jiffies(C)
Link: https://lkml.kernel.org/r/20241210-converge-secs-to-jiffies-v3-8-ddfefd7e9f2a@linux.microsoft.com
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Anna-Maria Behnsen <anna-maria@linutronix.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Daniel Mack <daniel@zonque.org>
Cc: David Airlie <airlied@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Jeff Johnson <jjohnson@kernel.org>
Cc: Jeff Johnson <quic_jjohnson@quicinc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jeroen de Borst <jeroendb@google.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Jozsef Kadlecsik <kadlec@netfilter.org>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Louis Peens <louis.peens@corigine.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nicolas Palix <nicolas.palix@imag.fr>
Cc: Oded Gabbay <ogabbay@kernel.org>
Cc: Ofir Bitton <obitton@habana.ai>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Praveen Kaligineedi <pkaligineedi@google.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roger Pau Monné <roger.pau@citrix.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Shailend Chand <shailend@google.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Simon Horman <horms@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
drm-next
Updates for v6.14
MDSS:
- properly described UBWC registers
- added SM6150 (aka QCS615) support
MDP4:
- several small fixes
DPU:
- added SM6150 (aka QCS615) support
- enabled wide planes if virtual planes are enabled (by using two SSPPs for a single plane)
- fixed modes filtering for platforms w/o 3DMux
- fixed DSPP DSPP_2 / _3 links on several platforms
- corrected DSPP definitions on SDM670
- added CWB hardware blocks support
- added VBIF to DPU snapshots
- dropped struct dpu_rm_requirements
DP:
- reworked DP audio support
DSI:
- added SM6150 (aka QCS615) support
GPU:
- Print GMU core fw version
- GMU bandwidth voting for a740 and a750
- Expose uche trap base via uapi
- UAPI error reporting
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsutUu4ff6OpXNXxqf1xaV0rV6oV23VXNRiF0_OEfe72Q@mail.gmail.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.14-2025-01-10:
amdgpu:
- Fix max surface handling in DC
- clang fixes
- DCN 3.5 fixes
- DCN 4.0.1 fixes
- DC CRC fixes
- DML updates
- DSC fixes
- PSR fixes
- DC add some divide by 0 checks
- SMU13 updates
- SR-IOV fixes
- RAS fixes
- Cleaner shader support for gfx10.3 dGPUs
- fix drm buddy trim handling
- SDMA engine reset updates
_ Fix RB bitmap setup
- Fix doorbell ttm cleanup
- Add CEC notifier support
- DPIA updates
- MST fixes
amdkfd:
- Shader debugger fixes
- Trap handler cleanup
- Cleanup includes
- Eviction fence wq fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250110172731.2960668-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Driver Changes:
- SRIOV VF: Avoid reading inaccessible registers (Jakub, Marcin)
- Introduce RPa frequency information (Rodrigo)
- Remove unnecessary force wakes on SLPC code (Vinay)
- Fix all typos in xe (Nitin)
- Adding steering info support for GuC register lists (Jesus)
- Remove unused xe_pciids.h harder, add missing PCI ID (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z4E0tlTAA6MZ7PF2@intel.com
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Driver Changes:
- More robust engine resets on Haswell and older (Nitin)
- Dead code removal (David)
- Selftest, logging and tracing improvements (Sk, Nitin, Sebastian,
Apoorva)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z4DidoEACFu7D6iG@jlahtine-mobl.ger.corp.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-next
DMEM cgroup pull request
This introduces a new cgroup controller to limit the device memory.
Notable users would be DRM, dma-buf heaps, or v4l2.
This pull request is based on the series developped by Maarten
Lankhorst, Friedrich Vock, and I:
https://lore.kernel.org/all/20241204134410.1161769-1-dev@lankhorst.se/
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250110-cryptic-warm-mandrill-b71f5d@houat
|
|
[WHAT & HOW]
Variables, used as denominators and maybe not assigned to other values,
should be initialized to non-zero to avoid DIVIDE_BY_ZERO, as reported
by Coverity.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e2c4c6c10542ccfe4a0830bb6c9fd5b177b7bbb7)
|
|
[Why]
Without the dmub hw lock, it may cause the lock timeout issue
while do modeset on PSR1 eDP panel.
[How]
Allow dmub hw lock for PSR1.
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a2b5a9956269f4c1a09537177f18ab0229fe79f7)
|