| Age | Commit message (Collapse) | Author |
|---|
|
Rearrange the allocation of the mm_struct registration to avoid
allocating underneath the i915->mm_lock, so that we avoid tainting the
lock (and in turn many other locks that may be held as i915->mm_lock is
taken, and those locks we may want on the free [shrinker] paths). In
doing so, we convert the lookup to be RCU protected by courtesy of
converting the free-worker to be an rcu_work.
v2: Remember to use hash_rcu variants to protect the list iteration from
concurrent add/del.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200619194038.5088-1-chris@chris-wilson.co.uk
|
|
Often we seem to detect an underrun right after modeset on gen2.
It seems to be a spurious detection (potentially the pipe is still
in a wonky state when we enable the planes). An extra vblank wait
seems to cure it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-13-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
|
|
The default fbc1 compression interval we use is 500 frames. That
translates to over 8 seconds typically. That's rather excessive
so let's drop it to 1 second.
The hardware will not attempt recompression unless at least one
line has been modified, so a shorter compression interval should
not cause extra bandwidth use in the purely idle scenario. Of
course in the mostly idle case we are possibly going to recompress
a bit more.
Should really try to find some kind of sweet spot to minimize
the energy usage...
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-11-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
|
|
Avoid the FBC_CONTROL rmw and just store the fbc compression
interval in the params/
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-10-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
|
|
Parametrize the FBC_CONTROL bits for neater code.
Also add the one missing bit: "stop compression on modification".
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-9-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
|
|
The hardware host tracking won't nuke the entire cfb (unless the
entire fb is written through the gtt) so don't clear the busy_bits
for gtt tracking.
Not that it really matters anymore since we've lost ORIGIN_GTT usage
everywhere.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-7-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
|
|
The current fence_y_offset calculation is broken. I think it more or
less used to do the right thing, but then I changed the plane code
to put the final x/y source offsets back into the src rectangle so
now it's just subtraacting the same value from itself. The code would
never have worked if we allowed the framebuffer to have a non-zero
offset.
Let's do this in a better way by just calculating the fence_y_offset
from the final plane surface offset. Note that we don't align the
plane surface address to fence rows so with horizontal panning there's
often a horizontal offset from the fence start to the surface address
as well. We have no way to tell the hardware about that so we just
ignore it. Based on some quick tests the invlidation still happens
correctly. I presume due to the invalidation nuking at least the full
line (or a segment of multiple lines).
Fixes: 54d4d719fa11 ("drm/i915: Overcome display engine stride limits via GTT remapping")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-4-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
|
|
As we close a handle GEM object, we update the drm_file's idr with an
error^W NULL pointer to indicate the in-progress closure, and finally
removing it. If we read the idr directly, we may then see an invalid
object pointer, and in our debugfs per_file_stats() we therefore need
to protect against the entry being invalid.
[ 1016.651637] RIP: 0010:per_file_stats+0xe/0x16e
[ 1016.651646] Code: d2 41 0f b6 8e 69 8c 00 00 48 89 df 48 c7 c6 7b 74 8c be 31 c0 e8 0c 89 cf ff eb d2 0f 1f 44 00 00 55 48 89 e5 41
57 41 56 53 <8b> 06 85 c0 0f 84 4d 01 00 00 49 89 d6 48 89 f3 3d ff ff ff 7f 73
[ 1016.651651] RSP: 0018:ffffad3a01337ba0 EFLAGS: 00010293
[ 1016.651656] RAX: 0000000000000018 RBX: ffff96fe040d65e0 RCX: 0000000000000002
[ 1016.651660] RDX: ffffad3a01337c50 RSI: 0000000000000000 RDI: 00000000000001e8
[ 1016.651663] RBP: ffffad3a01337bb8 R08: 0000000000000000 R09: 00000000000001c0
[ 1016.651667] R10: 0000000000000000 R11: ffffffffbdbe5fce R12: 0000000000000000
[ 1016.651671] R13: ffffffffbdbe5fce R14: ffffad3a01337c50 R15: 0000000000000001
[ 1016.651676] FS: 00007a597e2d7480(0000) GS:ffff96ff3bb00000(0000) knlGS:0000000000000000
[ 1016.651680] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1016.651683] CR2: 0000000000000000 CR3: 0000000171fc2001 CR4: 00000000003606e0
[ 1016.651687] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1016.651690] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1016.651693] Call Trace:
[ 1016.651693] Call Trace:
[ 1016.651703] idr_for_each+0x8a/0xe8
[ 1016.651711] i915_gem_object_info+0x2a3/0x3eb
[ 1016.651720] seq_read+0x162/0x3ca
[ 1016.651727] full_proxy_read+0x5b/0x8d
[ 1016.651733] __vfs_read+0x45/0x1bb
[ 1016.651741] vfs_read+0xc9/0x15e
[ 1016.651746] ksys_read+0x7e/0xde
[ 1016.651752] do_syscall_64+0x54/0x68
[ 1016.651758] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Reported-by: Guenter Roeck <linux@roeck-us.net>
Fixes: a8c15954d64a ("drm/i915: Protect debugfs per_file_stats with RCU lock")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630152724.3734-1-chris@chris-wilson.co.uk
|
|
Only the MEDIA_BUS_FMT_RGB666_1X7X3_SPWG,
MEDIA_BUS_FMT_RGB888_1X7X4_SPWG and MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA bus
formats are valid for LVDS panels. Warn at probe time to catch the
common mistake of using an incorrect format, as well as discrepancies
between the bus format and the reported bpc.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200629233320.8774-5-laurent.pinchart+renesas@ideasonboard.com
|
|
The DRM bus flags reporting on which clock edge the pixel data and sync
signals are sampled or driven don't make sense for LVDS panels, as the
bus then uses sub-clock timings to send data. Drop those flags and add a
warning in the probe function to make sure the mistake won't be
repeated.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200629233320.8774-4-laurent.pinchart+renesas@ideasonboard.com
|
|
The Satoz SAT050AT40H12R2 panel is an LVDS panel, the
MEDIA_BUS_FMT_RGB888_1X24 bus format is thus incorrect. Set it to the
correct value MEDIA_BUS_FMT_RGB888_1X7X4_SPWG.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200629233320.8774-3-laurent.pinchart+renesas@ideasonboard.com
|
|
The Starry KR070PE2T panel is a DPI panel, not and LVDS panel. Fix its
connector type.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Pascal Roeleven <dev@pascalroeleven.nl>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200629233320.8774-2-laurent.pinchart+renesas@ideasonboard.com
|
|
Added epoch counter checking to intel_encoder_hotplug
in order to be able process all the connector changes,
besides connection status. Also now any change in connector
would result in epoch counter change, so no multiple checks
are needed.
v2: Renamed change counter to epoch counter. Fixed type name.
v3: Fixed rebase conflict
v4: Remove duplicate drm_edid_equal checks from hdmi and dp,
lets use only once edid property is getting updated and
increment epoch counter from there.
Also lets now call drm_connector_update_edid_property
right after we get edid always to make sure there is a
unified way to handle edid change, without having to
change tons of source code as currently
drm_connector_update_edid_property is called only in
certain cases like reprobing and not right after edid is
actually updated.
v5: Fixed const modifiers, removed blank line
v6: Removed drm specific part from this patch, leaving only
i915 specific changes here.
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630002700.5451-4-kunal1.joshi@intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
|
|
This counter will be used by drm_helper_probe_detect caller to determine
if anything had changed(including edid, connection status and etc).
Hardware specific driver detect hooks are responsible for updating this
counter when some change is detected to notify the drm part,
which can trigger for example hotplug event.
Also now call drm_connector_update_edid_property
right after we get edid always to make sure there is a
unified way to handle edid change, without having to
change tons of source code as currently
drm_connector_update_edid_property is called only in
certain cases like reprobing and not right after edid is
actually updated.
v2: Added documentation for the new counter. Rename change_counter to
epoch_counter.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105540
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630002700.5451-3-kunal1.joshi@intel.com
|
|
Many drivers would benefit from using
drm helper to compare edid, rather
than bothering with own implementation.
v2: Added documentation for this function.
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630002700.5451-2-kunal1.joshi@intel.com
|
|
Currently there is no null check for a failed memory allocation
on the dsb object and without this a null pointer dereference
error can occur. Fix this by adding a null check.
Note: added a drm_err message in keeping with the error message style
in the function.
Addresses-Coverity: ("Dereference null return")
Fixes: afeda4f3b1c8 ("drm/i915/dsb: Pre allocate and late cleanup of cmd buffer")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200616114221.73971-1-colin.king@canonical.com
|
|
Remove the use of dev->archdata.iommu and use the private per-device
pointer provided by IOMMU core code instead.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200625130836.1916-3-joro@8bytes.org
|
|
There are a couple of spelling mistakes in kernel parameter help text,
namely "helpfull" and "paramters". Fix them.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200616082129.65517-1-colin.king@canonical.com
|
|
The HPD sense mechanism in Allwinner's old HDMI encoder hardware is more
or less an input-only GPIO. Other GPIO-based HPD implementations
directly return the current state, instead of polling for a specific
state and returning the other if that times out.
Remove the I/O polling from sun4i_hdmi_connector_detect() and directly
return a known state based on the current reading. This also gets rid
of excessive CPU usage by kworker as reported on Stack Exchange [1] and
Armbian forums [2].
[1] https://superuser.com/questions/1515001/debian-10-buster-on-cubietruck-with-bug-in-sun4i-drm-hdmi
[2] https://forum.armbian.com/topic/14282-headless-systems-and-sun4i_drm_hdmi-a10a20/
Fixes: 9c5681011a0c ("drm/sun4i: Add HDMI support")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200629060032.24134-1-wens@kernel.org
|
|
A single Ri mismatch doesn't automatically mean that the link integrity
is broken. Update and check of Ri and Ri' are done asynchronously. In
case an update happens just between the read of Ri' and the check against
Ri there will be a mismatch even if the link integrity is fine otherwise.
Signed-off-by: Oliver Barta <oliver.barta@aptiv.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504123524.7731-1-oliver.barta@aptiv.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.9:
Cross-subsystem Changes:
- Improve dma-buf docs.
Core Changes:
- Add NV15, Q410, Q401 yuv formats.
- Add uncompressed AFBC modifier.
- Add DP helepr for reading Ignore MSA from DPCD.
- Add missing panel type for some panels
- Optimize drm/mm hole handling.
- Constify connector to infoframe functions.
- Add debugfs for VRR monitor range.
Driver Changes:
- Assorted small bugfixes in panfrost, malidp, panel/otm8009a.
- Convert tfp410 dt bindings to yaml, and rework time calculations.
- Add support for a few more simple panels.
- Cleanups and optimizations for ast.
- Allow adv7511 and simple-bridge to be used without connector creation.
- Cleanups to dw-hdmi function prototypes.
- Remove enabled bool from tiny/repaper and mipi-dbi, atomic handles it.
- Remove unused header file from dw-mipi-dsi
- Begin removing ttm_bo->offset.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b1e53620-7937-895c-bfcf-ed208be59c7c@linux.intel.com
|
|
The PL111 DRM driver is now the sole user of the external
CLCD registers header file, so let's absorb that into the
pl111_drm.h file and save the external include.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Russell King <linux@armlinux.org.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200609200446.153209-3-linus.walleij@linaro.org
|
|
This moves over some of the credit for the development of this
driver from the old fbdev driver that I used as reference when
getting this in place.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Russell King <linux@armlinux.org.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200609200446.153209-1-linus.walleij@linaro.org
|
|
The linetime watermark is a 9 bit value, which gives us
a maximum linetime of just below 64 usec. If the linetime
exceeds that value we currently just discard the high bits
and program the rest into the register, which angers the
state checker.
To avoid that let's just clamp the value to the max. I believe
it should be perfectly fine to program a smaller linetime wm
than strictly required, just means the hardware may fetch data
sooner than strictly needed. We are further reassured by the
fact that with DRRS the spec tells us to program the smaller
of the two linetimes corresponding to the two refresh rates.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200625200003.12436-1-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
|
|
We only need the page array when the BO is about to be accessed.
So not only populate, but also create it on demand.
v2: move NULL check into ttm_tt_create()
v3: fix the occurrence in ttm_bo_kmap_ttm as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/373182/
|
|
Instead of signaling failure by setting the node pointer to
NULL do so by returning -ENOSPC.
v2: add memset() to make sure that mem is always initialized.
v3: drop memset() only set mm_node = NULL, move mm_node init in amdgpu
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/373181/
|
|
Some conflicts with ttm_bo->offset removal, but drm-misc-next needs updating to v5.8.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
|
|
Some of these comments are part of the Linux GPU Driver Developer's
Guide.
Fix some minor typo in the comments and remove a repeated 'the'.
Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200626204252.44565-1-antonio.borneo@st.com
|
|
Alexandre Oliva has recently removed these files from Linux Libre
with concerns that the sources weren't available.
The sources are available on IGT repository, and only open source
tools are used to generate the {ivb,hsw}_clear_kernel.c files.
However, the remaining concern from Alexandre Oliva was around
GPL license and the source not been present when distributing
the code.
So, it looks like 2 alternatives are possible, the use of
linux-firmware.git repository to store the blob or making sure
that the source is also present in our tree. Since the goal
is to limit the i915 firmware to only the micro-controller blobs
let's make sure that we do include the asm sources here in our tree.
Btw, I tried to have some diligence here and make sure that the
asms that these commits are adding are truly the source for
the mentioned files:
igt$ ./scripts/generate_clear_kernel.sh -g ivb \
-m ~/mesa/build/src/intel/tools/i965_asm
Output file not specified - using default file "ivb-cb_assembled"
Generating gen7 CB Kernel assembled file "ivb_clear_kernel.c"
for i915 driver...
igt$ diff ~/i915/drm-tip/drivers/gpu/drm/i915/gt/ivb_clear_kernel.c \
ivb_clear_kernel.c
< * Generated by: IGT Gpu Tools on Fri 21 Feb 2020 05:29:32 AM UTC
> * Generated by: IGT Gpu Tools on Mon 08 Jun 2020 10:00:54 AM PDT
61c61
< };
> };
\ No newline at end of file
igt$ ./scripts/generate_clear_kernel.sh -g hsw \
-m ~/mesa/build/src/intel/tools/i965_asm
Output file not specified - using default file "hsw-cb_assembled"
Generating gen7.5 CB Kernel assembled file "hsw_clear_kernel.c"
for i915 driver...
igt$ diff ~/i915/drm-tip/drivers/gpu/drm/i915/gt/hsw_clear_kernel.c \
hsw_clear_kernel.c
5c5
< * Generated by: IGT Gpu Tools on Fri 21 Feb 2020 05:30:13 AM UTC
> * Generated by: IGT Gpu Tools on Mon 08 Jun 2020 10:01:42 AM PDT
61c61
< };
> };
\ No newline at end of file
Used IGT and Mesa master repositories from Fri Jun 5 2020)
IGT: 53e8c878a6fb ("tests/kms_chamelium: Force reprobe after replugging
the connector")
Mesa: 5d13c7477eb1 ("radv: set keep_statistic_info with
RADV_DEBUG=shaderstats")
Mesa built with: meson build -D platforms=drm,x11 -D dri-drivers=i965 \
-D gallium-drivers=iris -D prefix=/usr \
-D libdir=/usr/lib64/ -Dtools=intel \
-Dkulkan-drivers=intel && ninja -C build
v2: Header clean-up and include build instructions in a readme (Chris)
Modified commit message to respect check-patch
Reference: http://www.fsfla.org/pipermail/linux-libre/2020-June/003374.html
Reference: http://www.fsfla.org/pipermail/linux-libre/2020-June/003375.html
Fixes: 47f8253d2b89 ("drm/i915/gen7: Clear all EU/L3 residual contexts")
Cc: <stable@vger.kernel.org> # v5.7+
Cc: Alexandre Oliva <lxoliva@fsfla.org>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200610201807.191440-1-rodrigo.vivi@intel.com
(cherry picked from commit 5a7eeb8ba143d860050ecea924a8f074f02d8023)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
drm-intel-fixes
gvt-fixes-2020-06-17
- Two missed MMIO handler fixes for SKL/CFL (Colin)
- Fix mask register bits check (Colin)
- Fix one lockdep error for debugfs entry access (Colin)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200617043418.GQ5687@zhen-hp.sh.intel.com
|
|
The helper uses the MIPI_DCS_SET_TEAR_SCANLINE, although it's currently
using the generic write. This does not look right.
Perhaps some platforms don't distinguish between the two writers?
Cc: Robert Chiras <robert.chiras@nxp.com>
Cc: Vinay Simha BN <simhavcs@gmail.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Thierry Reding <treding@nvidia.com>
Fixes: e83950816367 ("drm/dsi: Implement set tear scanline")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200505160329.2976059-3-emil.l.velikov@gmail.com
|
|
A few of the new panels create a local macro wrapping around
mipi_dsi_dcs_write. At the same time, they don't really care about the
command/payload split.
mipi_dsi_dcs_write does a kmalloc/memcpy/kfree for payload > 7 bytes.
Avoid that all together by using the _buffer function.
Aside:
panel-xinpeng-xpp055c272.c calls its wrapper "generic" although it
should be "dcs". But that for another day/patch.
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200505160329.2976059-2-emil.l.velikov@gmail.com
|
|
Currently the function heap allocates when we have any payload. Where in
many case the payload is 1 byte - ouch.
>From casual observation, vast majority of the payloads are smaller than
8 bytes - so use a stack array tx[8] to avoid the senseless kmalloc and
kfree dance.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200505160329.2976059-1-emil.l.velikov@gmail.com
|
|
Fix the following coccicheck warning:
drivers/gpu/drm/zte/zx_vga.c:158:2-3: Unneeded semicolon
drivers/gpu/drm/zte/zx_vga.c:171:2-3: Unneeded semicolon
drivers/gpu/drm/zte/zx_vga.c:179:2-3: Unneeded semicolon
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504113230.40588-1-yanaijie@huawei.com
|
|
in mic_pre_enable, pm_runtime_get_sync is called which
increments the counter even in case of failure, leading to incorrect
ref count. In case of failure, decrement the ref count before returning.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Propagate the proper error codes from the called functions instead of
unconditionally returning 0.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Merge conflict so merged it manually.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
platform_get_irq() will call dev_err() itself on failure,
so there is no need for the driver to also do this.
This is detected by coccinelle.
Signed-off-by: Tamseel Shams <m.shams@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
This patch adds missing BUS fields to the display panel descriptions of
the panels which are found on NVIDIA Tegra devices:
1. AUO B101AW03
2. Chunghwa CLAA070WP03XG
3. Chunghwa CLAA101WA01A
4. Chunghwa CLAA101WB01
5. Innolux N156BGE L21
6. Samsung LTN101NT05
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200621222742.25695-3-digetx@gmail.com
|
|
The EDT ET057090DHU panel has a DPI connector and not LVDS. This patch
corrects the panel's description.
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Fixes: 94f07917ebe8 ("drm/panel-simple: Add missing connector type for some panels")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200621222742.25695-2-digetx@gmail.com
|
|
Disable the plane if it's not visible. Otherwise mtk_ovl_layer_config()
would proceed with invalid plane and we may see vblank timeout.
Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
WARNING: unmet direct dependencies detected for MTK_MMSYS
Depends on [n]: (ARCH_MEDIATEK [=y] || COMPILE_TEST [=n]) && COMMON_CLK_MT8173_MMSYS [=n]
Selected by [y]:
- DRM_MEDIATEK [=y] && HAS_IOMEM [=y] && DRM [=y] && (ARCH_MEDIATEK [=y] || ARM && COMPILE_TEST [=n]) && COMMON_CLK [=y] && HAVE_ARM_SMCCC [=y] && OF [=y]
Make DRM_MEDIATEK depend on MTK_MMSYS to fix this.
Fixes: 2c758e301ed9 ("soc / drm: mediatek: Move routing control to mmsys device")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Equivalent information can be nowadays obtained using function tracer.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
drm device is now probed from mmsys. We need to use mmsys device to get gce
nodes. Fix following errors:
[ 0.740068] mediatek-drm mediatek-drm.1.auto: error -2 can't parse gce-client-reg property (0)
[ 0.748721] mediatek-drm mediatek-drm.1.auto: error -2 can't parse gce-client-reg property (0)
...
[ 2.659645] mediatek-drm mediatek-drm.1.auto: failed to request channel
[ 2.666270] mediatek-drm mediatek-drm.1.auto: failed to request channel
Fixes: 667c769246b0 ("soc / drm: mediatek: Fix mediatek-drm device probing")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Update code to reflect recent bspec changes
Bspec: 52890
Bspec: 53508
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200624215723.2316-1-matthew.s.atwood@intel.com
|
|
GPU address handling is device specific and should be handle by its device
driver.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/372937/
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
This patch uses score to select a new drm scheduler for better
loadbalance between multiple drm schedulers instead of num_jobs.
Below are test results after running amdgpu_test for ~10 times.
Before this patch:
sched_name num of many times it got schedule
========= ==================================
sdma0 1463
sdma1 198
comp_1.0.1 280
After this patch:
sched_name num of many times it got schedule
========= ==================================
sdma0 925
sdma1 928
comp_1.0.1 177
comp_1.1.1 44
comp_1.2.1 43
comp_1.3.1 44
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/373000/
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
Store ttm bo->offset in struct nouveau_bo instead.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/372932/
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
Calculate GPU offset within vmwgfx driver itself without depending on
bo->offset.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/372933/
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
ti-sn65dsi86 bridge is enumerated as a runtime device. When
suspend is triggered, PM core adds a refcount on all the
devices and calls device suspend, since usage count is
already incremented, runtime suspend will not be called
and it kept the bridge regulators and gpios ON which resulted
in platform not entering into XO shutdown.
Add changes to force suspend on the runtime device during pm sleep.
Signed-off-by: Harigovindan P <harigovi@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200609120455.20458-1-harigovi@codeaurora.org
|
|
This workaround now also applies to TGL and RKL, so extend the PCH test
to just capture everthing ICP and beyond.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200617180006.4130501-1-matthew.d.roper@intel.com
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
|
