| Age | Commit message (Collapse) | Author |
|---|
|
Component driver structures allocated with devm_kmalloc() in bind() are
freed automatically after unbind(). Since the contained drm structures
are accessed afterwards in drm_mode_config_cleanup(), move the
allocation into probe() to extend the driver structure's lifetime to the
lifetime of the device. This should eventually be changed to use drm
resource managed allocations with lifetime of the drm device.
We also need to ensure that all componets are available during the
unbind() so we need to call component_unbind_all() before we free
non-devres resources like planes.
Note this patch fixes the the use after free bug but introduces a
possible boot loop issue. The issue is triggered if the HDMI support is
enabled and a component driver always return -EPROBE_DEFER, see
discussion [1] for more details.
[1] https://lkml.org/lkml/2020/3/24/1467
Fixes: 17b5001b5143 ("imx-drm: convert to componentised device support")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
[m.felsch@pengutronix: fix imx_tve_probe()]
[m.felsch@pengutronix: resort component_unbind_all())
[m.felsch@pengutronix: adapt commit message]
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200719171428.60470-1-grandmaster@al2klimov.de
|
|
flags is unused since the driver was introduced in commit 45d59d704080
("drm: Add new driver for MXSFB controller").
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716174139.16602-1-u.kleine-koenig@pengutronix.de
|
|
In contrast to other display controllers on imx like DCSS and ipuv3
lcdif/mxsfb does not support detiling e.g. vivante tiled layouts.
Since mesa might assume otherwise make it explicit that only
DRM_FORMAT_MOD_LINEAR is supported.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/26877532e272c12a74c33188e2a72abafc9a2e1c.1584973664.git.agx@sigxcpu.org
|
|
Convert device logging with dev_* functions into drm_* functions.
The patch has been generated with the coccinelle script below.
The script focuses on instances of dev_* functions where the drm device
context is clearly visible in its arguments.
@@expression E1; expression list E2; @@
-dev_warn(E1->dev, E2)
+drm_warn(E1, E2)
@@expression E1; expression list E2; @@
-dev_info(E1->dev, E2)
+drm_info(E1, E2)
@@expression E1; expression list E2; @@
-dev_err(E1->dev, E2)
+drm_err(E1, E2)
@@expression E1; expression list E2; @@
-dev_info_once(E1->dev, E2)
+drm_info_once(E1, E2)
@@expression E1; expression list E2; @@
-dev_notice_once(E1->dev, E2)
+drm_notice_once(E1, E2)
@@expression E1; expression list E2; @@
-dev_warn_once(E1->dev, E2)
+drm_warn_once(E1, E2)
@@expression E1; expression list E2; @@
-dev_err_once(E1->dev, E2)
+drm_err_once(E1, E2)
@@expression E1; expression list E2; @@
-dev_err_ratelimited(E1->dev, E2)
+drm_err_ratelimited(E1, E2)
@@expression E1; expression list E2; @@
-dev_dbg(E1->dev, E2)
+drm_dbg(E1, E2)
Signed-off-by: Suraj Upadhyay <usuraj35@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200718150955.GA23103@blackclown
|
|
The wrappers in include/linux/pci-dma-compat.h should go away.
The patch has been generated with the coccinelle script below and has been
hand modified to replace GFP_ with a correct flag.
It has been compile tested.
When memory is allocated in 'i810_dma_initialize()' GFP_KERNEL can be used
because its only caller, 'i810_dma_init()', already use it and no lock is
taken in the between.
@@
@@
- PCI_DMA_BIDIRECTIONAL
+ DMA_BIDIRECTIONAL
@@
@@
- PCI_DMA_TODEVICE
+ DMA_TO_DEVICE
@@
@@
- PCI_DMA_FROMDEVICE
+ DMA_FROM_DEVICE
@@
@@
- PCI_DMA_NONE
+ DMA_NONE
@@
expression e1, e2, e3;
@@
- pci_alloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3;
@@
- pci_zalloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3, e4;
@@
- pci_free_consistent(e1, e2, e3, e4)
+ dma_free_coherent(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_single(e1, e2, e3, e4)
+ dma_map_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_single(e1, e2, e3, e4)
+ dma_unmap_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4, e5;
@@
- pci_map_page(e1, e2, e3, e4, e5)
+ dma_map_page(&e1->dev, e2, e3, e4, e5)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_page(e1, e2, e3, e4)
+ dma_unmap_page(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_sg(e1, e2, e3, e4)
+ dma_map_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_sg(e1, e2, e3, e4)
+ dma_unmap_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+ dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_device(e1, e2, e3, e4)
+ dma_sync_single_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+ dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+ dma_sync_sg_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2;
@@
- pci_dma_mapping_error(e1, e2)
+ dma_mapping_error(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_dma_mask(e1, e2)
+ dma_set_mask(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_consistent_dma_mask(e1, e2)
+ dma_set_coherent_mask(&e1->dev, e2)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200718072822.339064-1-christophe.jaillet@wanadoo.fr
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.9:
UAPI Changes:
Cross-subsystem Changes:
- Add ckoenig as dma-buf maintainer.
- Revert invalid fix for dma-fence-chain, and fix selftest.
- Add fixmes to amifb about APUS support.
- Use array3_size in fbcon_prepare_logo, and struct_size() in alloc_apertures.
- Fix leaks in neofb, fb/savage and omapfb.
- Other small fixes to fb code.
- Convert some dt bindings to schema for some panels, and fix simple-framebuffer dt example.
Core Changes:
- Add DRM_FORMAT_MOD_GENERIC_16_16_TILE as alias to DRM_FORMAT_MOD_SAMSUNG_16_16_TILE,
as it can be used more generic.
- Add support for multiple DispID extension blocks in edid.
- Use https instead of http for some of the urls.
- Use drm_* macros for logging in mipi-dsi and fb-helper.
- Further cleanup ttm_mem_reg handling.
- Remove duplicated words in comments.
Driver Changes:
- Use __drm_atomic_helper_crtc_reset in all atomic drivers.
- Add Amlogic Video FBC support to meson and fourcc to core.
- Refactor hisilicon's hibmc_drv_vdac.
- Create a TXP CRTC for vc4.
- Rework cursor support in ast.
- Fix runtime PM in STM.
- Allow bigger cursors in vkms.
- Cleanup sg handling in radeon and amdgpu, and stop creating dummy
gtt nodes with ttm fixed.
- Rework crtc handling in mgag200.
- Miscellaneous small fixes to meson, vgem, bridge/dw-hdmi,
panel/auo,b116xw03, panel/LG LB070WV8, lima, bridge/sil_sii8620,
virtio, tilcdc.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8b360d65-f228-9286-d247-3004156a5254@linux.intel.com
|
|
Cleaning up ast's MM code with ast_mm_fini() resets the write-combine
flags on the VRAM I/O memory. Drop ast_mm_fini() in favor of an auto-
release callback. Releasing the device also executes the callback.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716125353.31512-7-tzimmermann@suse.de
|
|
Posting the GPU requires the correct DRAM type to be stored in
struct ast_private. Therefore first initialize the DRAM info and
then post the GPU. This restores the original order of instructions
in this function.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Fixes: bad09da6deab ("drm/ast: Fixed vram size incorrect issue on POWER")
Cc: Joel Stanley <joel@jms.id.au>
Cc: Y.C. Chen <yc_chen@aspeedtech.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: "Y.C. Chen" <yc_chen@aspeedtech.com>
Cc: <stable@vger.kernel.org> # v4.11+
Link: https://patchwork.freedesktop.org/patch/msgid/20200716125353.31512-6-tzimmermann@suse.de
|
|
VRAM size detection is only relevant to the memory management. Move
the code into ast_mm.c.
While at it, rename the function to ast_get_vram_size(). The function
argument's type is now struct ast_private. The result is stored in a
local variable and not in struct ast_private any longer.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716125353.31512-5-tzimmermann@suse.de
|
|
As a first step to managed MM code in ast, switch over VRAM MM helpers.
v2:
* updated to use drmm_vram_helper_init()
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716125353.31512-4-tzimmermann@suse.de
|
|
Although built upon TTM, the ast driver's VRAM MM helper does not
expose TTM to its users. Rename the related ast file to ast_mm.c.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716125353.31512-3-tzimmermann@suse.de
|
|
Calling drmm_vram_helper_init() sets up a managed instance of
VRAM MM. Releasing the DRM device also frees the memory manager.
The patch also updates the DRM documentation for VRAM helpers. The
tutorial now describes the new managed interface. The old interfaces
are deprecated and should not be used in new code.
v2:
* rename init function to drmm_vram_helper_init()
* return errno code from init function; caller does not
need vram_mm anyway
* update documentation and remove docs for deprecated
un-managed functions
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716125353.31512-2-tzimmermann@suse.de
|
|
PP bcast is marked as doing async reset after job is done.
When resume after suspend, each PP is reset individually,
so no need to reset in PP bcast resume. But I forgot to
clear the PP bcast async reset mark so call into async wait
before job run and gets timeout.
Closes: https://gitlab.freedesktop.org/lima/linux/-/issues/34
Fixes: 3446d7e9883d ("drm/lima: add resume/suspend callback for each ip")
Reviewed-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200719073050.776962-1-yuq825@gmail.com
|
|
Silence compiler warning about used but uninitialized 'ipu_state'
variable. In practice, the variable would never be used when
uninitialized, but the compiler cannot know that 'priv->ipu_plane' will
always be NULL if CONFIG_INGENIC_IPU is disabled.
Silence the warning by initializing the value to NULL.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200719093834.14084-1-paul@crapouillou.net
|
|
The Xilinx ZynqMP SoC has a hardened display pipeline named DisplayPort
Subsystem. It includes a buffer manager, a video pipeline renderer
(blender), an audio mixer and a DisplayPort source controller
(transmitter). The DMA engine the provide data to the buffer manager, as
well as the DisplayPort PHYs that drive the lanes, are external to the
subsystem and interfaced using the DMA engine and PHY APIs respectively.
This driver supports the DisplayPort Subsystem and implements
- Two planes, for graphics and video
- One CRTC that supports alpha blending
- One encoder for the DisplayPort transmitter
- One connector for an external monitor
It currently doesn't support
- Color keying
- Test pattern generation
- Audio
- Live input from the Programmable Logic (FPGA)
- Output to the Programmable Logic (FPGA)
Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
in etnaviv_gpu_submit, etnaviv_gpu_recover_hang, etnaviv_gpu_debugfs,
and etnaviv_gpu_init the call to pm_runtime_get_sync increments the
counter even in case of failure, leading to incorrect ref count.
In case of failure, decrement the ref count before returning.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
|
|
Combining horizontal and vertical reflections gives us 180 degrees of
rotation. Both reflection modes are already supported, and thus, we just
need to mark the 180 rotation mode as supported. The 180 rotation mode is
needed for devices like Nexus 7 tablet, which have display panel mounted
upside-down.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Support horizontal reflection mode which will allow to support 180°
rotation mode when combined with the vertical reflection.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
This makes the naming consistent with the DRM core.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
In the function tegra_dc_probe(), when get irq failed, the function
platform_get_irq() logs an error message, so remove redundant message
here.
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
There are two PATBASE address registers, one for linear layout and other
for tiled. The driver's address registers list misses the tiled PATBASE
register.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Tegra TRM documentation states that hardware should be in a default state
when power partition is turned off, i.e. reset should be asserted. This
patch adds the missing reset assertions.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The hardware documentation uses AVDD_IO_HDMI_DP and VDD_HDMI_DP_PLL to
denote the two power supplies that drive the HDMI/DP outputs of the SOR.
Use these names instead of the arbitrary AVDD_IO and VDD_PLL names that
were used previously to avoid confusion.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
When job hangs and there is a memory error pointing at channel's push
buffer, it is very handy to know the push buffer's state. This patch
makes the push buffer's state to be dumped into KMSG in addition to the
job's gathers.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Once channel's job is hung, it dumps the channel's state into KMSG before
tearing down the offending job. If multiple channels hang at once, then
they dump messages simultaneously, making the debug info unreadable, and
thus, useless. This patch adds mutex which allows only one channel to emit
debug messages at a time.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
This patch fixes gather's BO refcounting on a pinning error. Gather's BO
won't be leaked now if something goes wrong.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
We don't need to hold and pin original BOs of the gathers in a case of
enabled firewall because in this case gather's content is copied and the
copy is used by the executed job.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
SW can trigger MIPI pads calibration any time after power on
but calibration results will be latched and applied to the pads
by MIPI CAL unit only when the link is in LP-11 state and then
status register will be updated.
For CSI, trigger of pads calibration happen during CSI stream
enable where CSI receiver is kept ready prior to sensor or CSI
transmitter stream start.
So, pads may not be in LP-11 at this time and waiting for the
calibration to be done immediate after calibration start will
result in timeout.
This patch splits tegra_mipi_calibrate() and tegra_mipi_wait()
so triggering for calibration and waiting for it to complete can
happen at different stages.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Use readl_relaxed_poll_timeout() in tegra_mipi_wait() to simplify
the code.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Tegra CSI driver need a separate MIPI device for each channel as
calibration of corresponding MIPI pads for each channel should
happen independently.
So, this patch updates tegra_mipi_request() API to add a device_node
pointer argument to allow creating mipi device for specific device
node rather than a device.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
When the extra HPD polling in sun4i_hdmi was removed, the result of
HPD was accidentally inverted.
Fix this by inverting the check.
Fixes: bda8eaa6dee7 ("drm: sun4i: hdmi: Remove extra HPD polling")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200711011030.21997-1-wens@kernel.org
|
|
git://people.freedesktop.org/~agd5f/linux into drm-fixes
amd-drm-fixes-5.8-2020-07-15:
amdgpu:
- Fix a race condition with KIQ
- Preemption fix
- Fix handling of fake MST encoders
- OLED panel fix
- Handle allocation failure in stream construction
- Renoir SMC fix
- SDMA 5.x fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200715213914.3994-1-alexander.deucher@amd.com
|
|
Bump version to 1.1 and set date to 2020-07-16.
v3: New patch
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716163846.174790-12-paul@crapouillou.net
|
|
Support multiple panels or bridges connected to the same DPI output of
the SoC. This setup can be found for instance on the GCW Zero, where the
same DPI output interfaces the internal 320x240 TFT panel, and the ITE
IT6610 HDMI chip.
v2: No change
v3: Allow > 80-char lines where it makes sense
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716163846.174790-11-paul@crapouillou.net
|
|
Add support for the Image Processing Unit (IPU) found in all Ingenic
SoCs.
The IPU can upscale and downscale a source frame of arbitrary size
ranging from 4x4 to 4096x4096 on newer SoCs, with bicubic filtering
on newer SoCs, bilinear filtering on older SoCs. Nearest-neighbour can
also be obtained with proper coefficients.
Starting from the JZ4725B, the IPU supports a mode where its output is
sent directly to the LCDC, without having to be written to RAM first.
This makes it possible to use the IPU as a DRM plane on the compatible
SoCs, and have it convert and scale anything the userspace asks for to
what's available for the display.
Regarding pixel formats, older SoCs support packed YUV 4:2:2 and various
planar YUV formats. Newer SoCs introduced support for RGB.
Since the IPU is a separate hardware block, to make it work properly the
Ingenic DRM driver will now register itself as a component master in
case the IPU driver has been enabled in the config.
When enabled in the config, the CRTC will see the IPU as a second primary
plane. It cannot be enabled at the same time as the regular primary
plane. It has the same priority, which means that it will also display
below the overlay plane.
v2: - ingenic-ipu is no longer its own module. It will be built
into the ingenic-drm module.
- If enabled in the config, both the core driver and the IPU
driver will register as components; otherwise the core
driver will bypass that and call the ingenic_drm_bind()
function directly.
- Since both files now build into the same module, the
symbols previously exported as GPL are not exported anymore,
since they are only used internally.
- Fix SPDX license header in ingenic-ipu.h
- Avoid using 'for(;;);' loops without trailing statement(s)
v3: - Pass priv structure to IRQ handler; that way we don't hardcode
the expectation that the IPU plane is at index #0.
- Rework osd_changed() to account for src_* changes
- Add multiplanar YUV 4:4:4 support
- Commit fb addresses to HW at vblank, since addr registers are
not shadow registers
- Probe IPU component later so that IPU plane is last
- Fix driver not working on IPU-less hardware
- Use IPU driver's name as the IRQ name to avoid having two
'ingenic-drm' in /proc/interrupts
- Fix IPU only working for still images on JZ4725B
- Add a bit more code comments
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716163846.174790-10-paul@crapouillou.net
|
|
All Ingenic SoCs starting from the JZ4725B support OSD mode.
In this mode, two separate planes can be used. They can have different
positions and sizes, and one can be overlayed on top of the other.
v2: Use fallthrough; instead of /* fall-through */
v3: - Add custom atomic_tail function to handle case where HW gives no
VBLANK
- Use regmap_set_bits() / regmap_clear_bits() when possible
- Use dma_hwdesc_f{0,1} fields in priv structure instead of array
- Use dmam_alloc_coherent() instead of dma_alloc_coherent()
- Use more meaningful 0xf0 / 0xf1 values as DMA descriptors IDs
- Add a bit more code comments
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716163846.174790-9-paul@crapouillou.net
|
|
Use dmam_alloc_coherent() instead of dma_alloc_coherent(). Then we don't
need to register a custom cleanup handler.
v3: New patch
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716163846.174790-8-paul@crapouillou.net
|
|
Move the register definitions to ingenic-drm.h, to keep
ingenic-drm-drv.c tidy.
v2: Fix SPDX license tag
v3: No change
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716163846.174790-7-paul@crapouillou.net
|
|
The address of the DMA descriptor never changes. It can therefore be set
in the probe function.
v2-v3: No change
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716163846.174790-6-paul@crapouillou.net
|
|
If you pass a string that is not terminated with a carriage return to
dev_err(), it will eventually be printed with a carriage return, but
not right away, since the kernel will wait for a pr_cont().
v2: New patch
v3: No change
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716163846.174790-5-paul@crapouillou.net
|
|
Full rename without any modification, except to the Makefile.
Renaming ingenic-drm.c to ingenic-drm-drv.c allow to decouple the module
name from the source file name in the Makefile. This will be useful
later when more source files are added.
v2: New patch
v3: No change
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716163846.174790-4-paul@crapouillou.net
|
|
plane->index is NOT the index of the color plane in a YUV frame.
Actually, a YUV frame is represented by a single drm_plane, even though
it contains three Y, U, V planes.
v2-v3: No change
Cc: stable@vger.kernel.org # v5.3
Fixes: 90b86fcc47b4 ("DRM: Add KMS driver for the Ingenic JZ47xx SoCs")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716163846.174790-1-paul@crapouillou.net
|
|
While I had thought I'd tested this before, it looks like this one issue
slipped by my original CRC patches. Basically, there seem to be a few
rules we need to follow when sending CRC commands to the display
controller:
* CRCs cannot be both disabled and enabled for a single head in the same
flush
* If a head with CRC reporting enabled switches from one OR to another,
there must be a flush before the OR is re-enabled regardless of the
final state of CRC reporting.
So, split nv50_crc_atomic_prepare_notifier_contexts() into two
functions:
* nv_crc_atomic_release_notifier_contexts() - checks whether the CRC
notifier contexts were released successfully after the first flush
* nv_crc_atomic_init_notifier_contexts() - prepares any CRC notifier
contexts for use before enabling reporting
Additionally, in order to force a flush when we re-assign ORs with heads
that have CRCs enabled we split our atomic check function into two:
* nv50_crc_atomic_check_head() - called from our heads' atomic checks,
determines whether a state needs to set or clear CRC reporting
* nv50_crc_atomic_check_outp() - called at the end of the atomic check
after all ORs have been added to the atomic state, and sets
nv50_atom->flush_disable if needed
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <skeggsb@gmail.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200629223635.103804-1-lyude@redhat.com
|
|
This introduces support for CRC readback on gf119+, using the
documentation generously provided to us by Nvidia:
https://github.com/NVIDIA/open-gpu-doc/blob/master/Display-CRC/display-crc.txt
We expose all available CRC sources. SF, SOR, PIOR, and DAC are exposed
through a single set of "outp" sources: outp-active/auto for a CRC of
the scanout region, outp-complete for a CRC of both the scanout and
blanking/sync region combined, and outp-inactive for a CRC of only the
blanking/sync region. For each source, nouveau selects the appropriate
tap point based on the output path in use. We also expose an "rg"
source, which allows for capturing CRCs of the scanout raster before
it's encoded into a video signal in the output path. This tap point is
referred to as the raster generator.
Note that while there's some other neat features that can be used with
CRC capture on nvidia hardware, like capturing from two CRC sources
simultaneously, I couldn't see any usecase for them and did not
implement them.
Nvidia only allows for accessing CRCs through a shared DMA region that
we program through the core EVO/NvDisplay channel which is referred to
as the notifier context. The notifier context is limited to either 255
(for Fermi-Pascal) or 2047 (Volta+) entries to store CRCs in, and
unfortunately the hardware simply drops CRCs and reports an overflow
once all available entries in the notifier context are filled.
Since the DRM CRC API and igt-gpu-tools don't expect there to be a limit
on how many CRCs can be captured, we work around this in nouveau by
allocating two separate notifier contexts for each head instead of one.
We schedule a vblank worker ahead of time so that once we start getting
close to filling up all of the available entries in the notifier
context, we can swap the currently used notifier context out with
another pre-prepared notifier context in a manner similar to page
flipping.
Unfortunately, the hardware only allows us to this by flushing two
separate updates on the core channel: one to release the current
notifier context handle, and one to program the next notifier context's
handle. When the hardware processes the first update, the CRC for the
current frame is lost. However, the second update can be flushed
immediately without waiting for the first to complete so that CRC
generation resumes on the next frame. According to Nvidia's hardware
engineers, there isn't any cleaner way of flipping notifier contexts
that would avoid this.
Since using vblank workers to swap out the notifier context will ensure
we can usually flush both updates to hardware within the timespan of a
single frame, we can also ensure that there will only be exactly one
frame lost between the first and second update being executed by the
hardware. This gives us the guarantee that we're always correctly
matching each CRC entry with it's respective frame even after a context
flip. And since IGT will retrieve the CRC entry for a frame by waiting
until it receives a CRC for any subsequent frames, this doesn't cause an
issue with any tests and is much simpler than trying to change the
current DRM API to accommodate.
In order to facilitate testing of correct handling of this limitation,
we also expose a debugfs interface to manually control the threshold for
when we start trying to flip the notifier context. We will use this in
igt to trigger a context flip for testing purposes without needing to
wait for the notifier to completely fill up. This threshold is reset
to the default value set by nouveau after each capture, and is exposed
in a separate folder within each CRTC's debugfs directory labelled
"nv_crc".
Changes since v1:
* Forgot to finish saving crc.h before saving, whoops. This just adds
some corrections to the empty function declarations that we use if
CONFIG_DEBUG_FS isn't enabled.
Changes since v2:
* Don't check return code from debugfs_create_dir() or
debugfs_create_file() - Greg K-H
Changes since v3:
(no functional changes)
* Fix SPDX license identifiers (checkpatch)
* s/uint32_t/u32/ (checkpatch)
* Fix indenting in switch cases (checkpatch)
Changes since v4:
* Remove unneeded param changes with nv50_head_flush_clr/set
* Rebase
Changes since v5:
* Remove set but unused variable (outp) in nv50_crc_atomic_check() -
Kbuild bot
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200627194657.156514-10-lyude@redhat.com
|
|
While most of the functionality on Nvidia GPUs doesn't require using an
explicit handle instead of the main VRAM handle + offset, there are a
couple of places that do require explicit handles, such as CRC
functionality. Since this means we're about to add another
nouveau-chosen handle, let's just go ahead and move any hard-coded
handles into a single header. This is just to keep things slightly
organized, and to make it a little bit easier if we need to add more
handles in the future.
This patch should contain no functional changes.
Changes since v3:
* Correct SPDX license identifier (checkpatch)
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200627194657.156514-9-lyude@redhat.com
|
|
In order to make sure that we flush disable updates at the right time
when disabling CRCs, we'll need to be able to look at the outp state to
see if we're changing it at the same time that we're disabling CRCs.
So, expose the struct in disp.h.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200627194657.156514-8-lyude@redhat.com
|
|
While we're not quite ready yet to add support for flexible wndw
mappings, we are going to need to at least keep track of the static wndw
mappings we're currently using in each head's atomic state. We'll likely
use this in the future to implement real flexible window mapping, but
the primary reason we'll need this is for CRC support.
See: on nvidia hardware, each CRC entry in the CRC notifier dma context
has a "tag". This tag corresponds to the nth update on a specific
EVO/NvDisplay channel, which itself is referred to as the "controlling
channel". For gf119+ this can be the core channel, ovly channel, or base
channel. Since we don't expose CRC entry tags to userspace, we simply
ignore this feature and always use the core channel as the controlling
channel. Simple.
Things get a little bit more complicated on gv100+ though. GV100+ only
lets us set the controlling channel to a specific wndw channel, and that
wndw must be owned by the head that we're grabbing CRCs when we enable
CRC generation. Thus, we always need to make sure that each atomic head
state has at least one wndw that is mapped to the head, which will be
used as the controlling channel.
Note that since we don't have flexible wndw mappings yet, we don't
expect to run into any scenarios yet where we'd have a head with no
mapped wndws. When we do add support for flexible wndw mappings however,
we'll need to make sure that we handle reprogramming CRC capture if our
controlling wndw is moved to another head (and potentially reject the
new head state entirely if we can't find another available wndw to
replace it).
With that being said, nouveau currently tracks wndw visibility on heads.
It does not keep track of the actual ownership mappings, which are
(currently) statically programmed. To fix this, we introduce another
bitmask into nv50_head_atom.wndw to keep track of ownership separately
from visibility. We then introduce a nv50_head callback to handle
populating the wndw ownership map, and call it during the atomic check
phase when core->assign_windows is set to true.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200627194657.156514-7-lyude@redhat.com
|
|
While we expose the ability to turn off hardware dithering for nouveau,
we actually make the mistake of turning it on anyway, due to
dithering_depth containing a non-zero value if our dithering depth isn't
also set to 6 bpc.
So, fix it by never enabling dithering when it's disabled.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200627194657.156514-6-lyude@redhat.com
|
|
Currently, we modify the depth value stored in the atomic state when
performing a commit in order to workaround the fact we haven't
implemented support for depths higher then 10 yet. This isn't idempotent
though, as it will happen every atomic commit where we modify the OR
state even if the head's depth in the atomic state hasn't been modified.
Normally this wouldn't matter, since we don't modify OR state outside of
modesets, but since the CRC capture region is implemented as part of the
OR state in hardware we'll want to make sure all commits modifying OR
state are idempotent so as to avoid changing the depth unexpectedly.
So, fix this by simply not writing the reduced depth value we come up
with to the atomic state.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200627194657.156514-5-lyude@redhat.com
|
