summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2015-12-14drm/msm/mdp: Remove CONFIG_OF checks from MDP driversArchit Taneja
We don't intend to use downstream non-DT kernels anymore, so remove CONFIG_OF checks. Update the TODO comment so that we don't forget about max_clk setting for non APQ8064 chips having MDP4. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-12-14drm/msm: Update compatible strings for mdpArchit Taneja
Create distinct compatible strings for mdp4 and mdp5. Keep "qcom,mdss_mdp" as is to support downstream kernels. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-12-14drm/msm: Remove non-DT code in msm_drvArchit Taneja
Support for non-DT kernels was mainly to use v3.4 downstream kernels. This is no longer a priority now as we have reasonable support upstream. Remove CONFIG_OF from the top level msm_drv.c file. While we're at it, clean up the data matching process using of_device_get_match_data. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-12-14drm/msm/mdp5: high precision vblank timestamp supportArchit Taneja
MDP5 has line count and frame count registers for each interface. Enable these counters and use them to implement the get_vblank_timestamp drm driver op. The line counter starts with the value 1 at the beginning of the VSYNC pulse and ends with value VTOTAL at the end of VFP. This value is used to determine whether we're in blanking period or not, and an adjusted value of this counter is used to get vpos as expected by get_scanout_position. Since there is no way to calculate hpos, we always set it to 0. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-12-14drm/tegra: Advertise DRIVER_ATOMICThierry Reding
The driver has supported atomic mode-setting for quite a while. It's time to advertise that. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-14drm/tegra: Use DRIVER level for IOMMU aperture messageThierry Reding
This allows the message to be shown even if core messages are disabled globally in DRM. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-14drm/tegra: checking for IS_ERR() instead of NULLDan Carpenter
The tegra_sor_hdmi_find_settings() function returns NULL on error and not an ERR_PTR. Fixes: 459cc2c6800b ('drm/tegra: sor: Add HDMI support') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-14drm/tegra: dc: Add missing of_node_put()Julia Lawall
for_each_matching_node() performs an of_node_get() on each iteration, so a break out of the loop requires an of_node_put(). A simplified version of the semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ local idexpression n; expression e; @@ for_each_matching_node(n,...) { ... ( of_node_put(n); | e = n | + of_node_put(n); ? break; ) ... } ... when != n // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-14drm/tegra: Implement subsystem-level suspend/resumeThierry Reding
Use the drm_atomic_helper_suspend() and drm_atomic_helper_resume() helpers to implement subsystem-level suspend/resume. v2: suspend framebuffer device to avoid concurrency issues v3: resume fbdev on failure to suspend (Emil Velikov) Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-14drm/tegra: sor: Remove unnecessary conditionalThierry Reding
Checking for sor->aux in eDP specific code is unnecessary because eDP inherently requires a valid AUX channel. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-14drm/tegra: sor: Operate on struct drm_dp_aux *Thierry Reding
Instead of getting a pointer to the driver-specific wrapper of AUX channels, use the AUX channel objects directly to avoid hackish casting between the two types. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-14drm/tegra: Use drm_gem_object_unreference_unlocked()Daniel Vetter
This only grabs the mutex when really needed, but still has a might- acquire lockdep check to make sure that's always possible. With this patch Tegra DRM is officially struct_mutex free, yay! v2: refernce_unlocked doesn't exist as kbuild spotted. Cc: Thierry Reding <thierry.reding@gmail.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> [treding@nvidia.com: remove unused variables] Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-14drm/tegra: Don't take dev->struct_mutex in mmap offset ioctlDaniel Vetter
Since David Herrmann's mmap vma manager rework we don't need to grab dev->struct_mutex any more to prevent races when looking up the mmap offset. Drop it and instead don't forget to use the unref_unlocked variant (since the drm core still cares). v2: Finally get rid of the copypasta from another commit in this commit message. And convert to _unlocked like we need to (Patrik). Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-14drm/tegra: Use unlocked gem unreferencingDaniel Vetter
For drm_gem_object_unreference callers are required to hold dev->struct_mutex, which these paths don't. Enforcing this requirement has become a bit more strict with commit ef4c6270bf2867e2f8032e9614d1a8cfc6c71663 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Oct 15 09:36:25 2015 +0200 drm/gem: Check locking in drm_gem_object_unreference Cc: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-14drm/tegra: Use new multi-driver module helpersThierry Reding
Use the new multi-driver module helpers to get rid of some boilerplate in the module initialization and cleanup functions. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-14gpu: host1x: Add Tegra210 supportThierry Reding
The host1x unit found in Tegra210 SoCs is very similar to the unit in Tegra124, but it has 2 additional channels for a total of 14 channels. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-14gpu: host1x: Remove core driver on unregisterThierry Reding
When unregistering a host1x driver, make sure to unregister the core driver as well to prevent it from sticking around and oppose reloading of the driver. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-14gpu: host1x: Use platform_register/unregister_drivers()Thierry Reding
These new helpers simplify implementing multi-driver modules and properly handle failure to register one driver by unregistering all previously registered drivers. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-14drm/omap: fix fbdev pix format to support all platformsTomi Valkeinen
omap_fbdev always creates a framebuffer with ARGB8888 pixel format. On OMAP3 we have VIDEO1 overlay that does not support ARGB8888, and on OMAP2 none of the overlays support ARGB888. This patch changes the omap_fbdev's fb to XRGB8888, which is supported by all platforms. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: H. Nikolaus Schaller <hns@goldelico.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2015-12-13drm/exynos: gem: remove old unused prototypesMarek Szyprowski
This patch removes old, unused function prototypes from exynos_drm_gem.h. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-12-13drm/exynos: fimd: fix dma burst size setting for small plane sizeMarek Szyprowski
This patch fixes trashed display of buffers cropped to very small width. Even if DMA is unstable and causes tearing when changing the burst size, it is still better than displaying a garbage. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-12-13drm/exynos: fix clipping when scaling is enabledMarek Szyprowski
This patch fixes calculation of src x/y offset for negative crtc x/y values when scaling is enabled. This fixes possible IOMMU fault when scaling is enabled. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-12-13drm/exynos: mixer: use ratio precalculated in exynos_stateMarek Szyprowski
Common plane code already calculates and checks for supported scalling modes, so additional code in mixer driver can be now removed. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-12-13drm/exynos: add generic check for plane stateMarek Szyprowski
This patch adds generic check for plane state - display area dimensions, so drivers can always assume that they get valid plane state to set. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-12-13drm/exynos: introduce exynos_drm_plane_config structureMarek Szyprowski
This patch adds common structure for keeping plane configuration and capabilities data. This patch is inspired by similar code developed by Tobias Jakobi. Changelog v2: - fix vidi_win_types(i) call. vidi_win_types is not a function. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-12-13drm/exynos: mixer: enable video overlay plane only when VP is availableMarek Szyprowski
Video overlay plane should be registered only when suitable hardware sub-block (Video Processor) is available. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-12-13drm/exynos: mixer: use crtc->state->adjusted_mode instead of crtc->modeMarek Szyprowski
This patch replaces usage of crtc->mode with crtc->state->adjusted_mode like it is already done in common plane code. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-12-13drm/exynos: introduce exynos_drm_plane_state structureMarek Szyprowski
This patch introduces exynos_drm_plane_state structure, which subclasses drm_plane_state and holds precalculated data suitable for configuring Exynos hardware. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-12-13drm/exynos: move dma_addr attribute from exynos plane to exynos fbMarek Szyprowski
DMA address is a framebuffer attribute and the right place for it is exynos_drm_framebuffer not exynos_drm_plane. This patch also introduces helper function for getting dma address of the given framebuffer. Changelog v2: - use state->fb instead of plane->base.fb. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-12-13drm/exynos: exynos7-decon: remove excessive checkMarek Szyprowski
Display area is already checked by exynos plane core, so there is no need for such check in driver code. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-12-13drm/exynos: rotator: convert to common clock frameworkMarek Szyprowski
This driver was not used after introduction of common clock framework. This patch adds missing prepare/unprepare calls and allows to use it again with current kernel code. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-12-13drm/exynos: gsc: add device tree support and remove usage of static mappingsSeung-Woo Kim
This patch adds device tree support for exynos_drm_gsc. This patch also fixed build issue on non-Exynos platforms, thus dependency on !ARCH_MULTIPLATFORM can be now removed. The driver cannot be used simultaneously with V4L2 Mem2Mem GScaller driver thought. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-12-13drm/exynos: gsc: fix wrong pm_runtime stateSeung-Woo Kim
At probe time, gsc clock is not enabled, so pm_runtime state should be deactive. So this patch removes pm_runtime_set_active() from gsc_probe(). Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-12-13drm/exynos: gsc: prepare and unprepare gsc clockSeung-Woo Kim
Ths patch changes the clk_enable and clk_disable call in gsc driver into clk_prepare_enable and clk_disable_unprepare. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-12-13drm/exynos: dp: add of_graph dt binding support for panelInki Dae
This patch adds of_graph dt binding support for panel device and also keeps the backward compatibility. i.e., The dts file for Exynos5800 based peach pi board has a panel property so we need to keep the backward compatibility. Changelog v3: - bind only one of two nodes outbound - panel or bridge. Changelog v2: - return -EINVAL if getting a port node failed. Signed-off-by: Inki Dae <inki.dae@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2015-12-13drm/exynos: decon: remove unused variablesInki Dae
This patch just removes unused variables, i and ret. Signed-off-by: Inki Dae <inki.dae@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2015-12-13drm/exynos: dsi: modify a error type when getting a node failedInki Dae
This patch makes it to return -EINVAL instead of -ENXIO when getting a port or remote node failed. Signed-off-by: Inki Dae <inki.dae@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2015-12-13drm/exynos: simplify sleep PM opsAndrzej Hajda
PM ops in exynos_drm_drv were split into two separate function as they were used also by drm device. Since PM ops have been removed from drm device, the functions can be merged together. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-12-13drm/exynos: dsi: add runtime pm supportInki Dae
This patch adds runtime pm interfaces to dsi driver. Each sub driver should control not only its own clocks and regulator but also its power domain. For this, it removes existing exynos_dsi_poweron/poweroff interfaces and uses runtime pm interfaces instead. Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-12-13drm/exynos: add pm_runtime to DECON 7Gustavo Padovan
Let pm_runtime handle the enabling/disabling of the device with proper refcnt instead of rely on specific flags to track the enabled state. Changelog v3: - revive suspended to keep current dpms mode Changelog v2: - Modify CONFIG_PM_SLEEP -> CONFIG_PM Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-12-13drm/exynos: add pm_runtime to DECON 5433Gustavo Padovan
Let pm_runtime handle the enabling/disabling of the device with proper refcnt instead of rely on specific flags to track the enabled state. Changelog v3: - Change CONFIG_PM_SLEEP -> CONFIG_PM Changelog v2: - no change Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-12-13drm/exynos: add pm_runtime to FIMDGustavo Padovan
Let pm_runtime handle the enabling/disabling of the device with proper refcnt instead of rely on specific flags to track the enabled state. Chnagelog v3: - Revive suspended varable to check the suspend status. Changelog v2: - Remove unnecessary changes which removed commit callback from decon drivers and modify CONFIG_PM_SLEEP -> CONFIG_PM Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-12-13drm/exynos: add pm_runtime to MixerGustavo Padovan
Let pm_runtime handle the enabling/disabling of the device with proper refcnt instead of rely on specific flags to track the enabled state. Changelog v2: - revive MXR_BIT_POWERED flag to keep current dpms mode. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-12-13drm/exynos: add pm_runtime to HDMIGustavo Padovan
Let pm_runtime handle the enabling/disabling of the device with proper refcnt instead of rely on specific flags to track the enabled state. Changelog v3: - revive powered flag to keep current dpms mode Changelog v2: - Mofidy CONFIG_PM_SLEEP -> CONFIG_PM Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-12-13drm/exynos: add pm_runtime to DPGustavo Padovan
Let pm_runtime handle the enabling/disabling of the device with proper refcnt instead of rely on specific flags to track the enabled state. Chnagelog v3: - revive dpms_mode to keep current dpms mode. Changelog v2: - no change Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-12-13drm/exynos: do not start enabling DP at bind() phaseGustavo Padovan
The DP device will be properly enabled at the enable() call just after the bind call finishes. Changelog v2: - no change Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-12-11drm/i915: PSR also doesn't have link_entry_time on SKL.Rodrigo Vivi
This bit is also reserved on Skylake. Actually the only platform that supports this is Haswell, so let's fix this logic and apply this link entry time only for the platform that supports it, i.e. Haswell. This also changes the style to let more clear platform differences outside the reg write. We would probably catch this case sooner if separated, or not... Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1449880291-21388-1-git-send-email-rodrigo.vivi@intel.com
2015-12-11Merge tag 'drm-i915-get-eld' of tiwai/sound into drm-intel-next-queuedDaniel Vetter
Add get_eld audio component for i915/HD-audio Currently, the HDMI/DP audio status and ELD are notified and obtained via the hardware-level communication over HD-audio unsolicited event and verbs although the graphics driver holds the exactly same information. As we already have a notification via audio component, this is another step forward; namely, the audio driver may fetch directly the audio status and ELD via the new component op. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-12-11drm/i915: mark a newly-created GEM object dirty when filled with dataDave Gordon
When creating a new (pageable) GEM object and filling it with data, we must mark it as 'dirty', i.e. backing store is out-of-date w.r.t. the newly-written content. This ensures that if the object is evicted under memory pressure, its pages in the pagecache will be written to backing store rather than discarded. Based on an original version by Alex Dai. Signed-off-by: Alex Dai <yu.dai@intel.com> Signed-off-by: Dave Gordon <david.s.gordon@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1449773486-30822-3-git-send-email-david.s.gordon@intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-12-11drm/i915: mark GEM object pages dirty when mapped & written by the CPUDave Gordon
In various places, a single page of a (regular) GEM object is mapped into CPU address space and updated. In each such case, either the page or the the object should be marked dirty, to ensure that the modifications are not discarded if the object is evicted under memory pressure. The typical sequence is: va = kmap_atomic(i915_gem_object_get_page(obj, pageno)); *(va+offset) = ... kunmap_atomic(va); Here we introduce i915_gem_object_get_dirty_page(), which performs the same operation as i915_gem_object_get_page() but with the side-effect of marking the returned page dirty in the pagecache. This will ensure that if the object is subsequently evicted (due to memory pressure), the changes are written to backing store rather than discarded. Note that it works only for regular (shmfs-backed) GEM objects, but (at least for now) those are the only ones that are updated in this way -- the objects in question are contexts and batchbuffers, which are always shmfs-backed. Separate patches deal with the cases where whole objects are (or may be) dirtied. v3: Mark two more pages dirty in the page-boundary-crossing cases of the execbuffer relocation code [Chris Wilson] Signed-off-by: Dave Gordon <david.s.gordon@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1449773486-30822-2-git-send-email-david.s.gordon@intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
generated by cgit (git 2.34.1) at 2025-09-22 17:58:49 +0000