| Age | Commit message (Collapse) | Author |
|---|
|
These new helpers simplify implementing multi-driver modules and
properly handle failure to register one driver by unregistering all
previously registered drivers.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
omap_dmm_tiler.c can't be compiled as a module and it is built
unconditionally as part of omapdrm. Since it can't be used as a module,
there is no need for it to have an unused MODULE_ALIAS().
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
Fixes: a67719d18229 ("drm/rockchip: vop: spilt register related into rockchip_reg_vop.c")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
The total delay of HDMI hotplug detecting with 30ms is sometimes not
enoughtfor HDMI live status up with specific HDMI monitors in BSW platform.
After doing experiments for following monitors, it needs 80ms at least
for those worst cases.
Lenovo L246 1xwA (4 failed, necessary hot-plug delay: 58/40/60/40ms)
Philips HH2AP (9 failed, necessary hot-plug delay: 80/50/50/60/46/40/58/58/39ms)
BENQ ET-0035-N (6 failed, necessary hot-plug delay: 60/50/50/80/80/40ms)
DELL U2713HM (2 failed, necessary hot-plug delay: 58/59ms)
HP HP-LP2475w (5 failed, necessary hot-plug delay: 70/50/40/60/40ms)
It looks like 70-80 ms is BSW platform needs in some bad cases of the
monitors at this end (8 times delay at most). Keep less than 100ms for
HDCP pulse HPD low (with at least 100ms) to respond a plug out.
Reviewed-by: Cooper Chiou <cooper.chiou@intel.com>
Tested-by: Gary Wang <gary.c.wang@intel.com>
Cc: Gavin Hindman <gavin.hindman@intel.com>
Cc: Sonika Jindal <sonika.jindal@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Gary Wang <gary.c.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450858295-12804-1-git-send-email-gary.c.wang@intel.com
Tested-by: Shobhit Kumar <shobhit.kumar@intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Fixes: 237ed86c693d ("drm/i915: Check live status before reading edid")
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit f8d03ea0053b23de42c828d559016eabe0b91523)
[Jani: undo the file mode change of the original commit]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1451427643-7266-1-git-send-email-benjamin.widawsky@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Now that omapdss is only for omapdrm, we can change omapdrm to select
OMAP2_DSS to enable omapdss if omapdrm is enabled, instead of omapdrm
depending on omapdss.
We can also change omapdss and the display drivers to depend on
DRM_OMAP, so that they are only visible under omapdrm in menuconfig.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Acked-by: Rob Clark <robdclark@gmail.com>
|
|
Now that omapfb has its own copy of omapdss and display drivers, we can
move omapdss and display drivers which omapdrm uses to omapdrm's
directory.
We also need to change the main drm Makefile so that omapdrm directory
is always entered, because omapdss has a file that can't be built as a
module.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Acked-by: Rob Clark <robdclark@gmail.com>
|
|
RK3036 registers layout is quite difference with rk3288 layout,
The IC design with different framework, rk3036 vop is VOP LITE,
and rk3288 is VOP FULL.
RK3036 support two overlay plane and one hwc plane, max output
resolution is 1080p. it support IOMMU, and its IOMMU same as
rk3288's.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
|
|
There are two version scale control register found on vop,
scale full version found on rk3288, support extension registers.
and scale little version found on rk3036, only support common scale.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
|
|
No functional updates. Spilt register related into another file
would be nice to multi vop driver,
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
|
|
Move interrupt registers into vop_data, so it can use at multi-vop driver
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
|
|
Move cfg_done register into vop_data, so it can use at multi-vop driver
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
|
|
encoder.enable is more compatible to atomic api than encoder.prepare/commit
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
|
|
Fill atomic needed funcs with default atomic helper library.
Rockchip use dw_hdmi, and drm/rockchip will covert to atomic api,
we need dw_hdmi support atomic funcs.
Now another drm driver use dw_hdmi is imx, not yet atomic, so
check DRIVER_ATOMIC at runtime to spilt atomic and not atomic.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
|
|
Both connecter gate and out_mode are not conflict with mode set
configure. Direct setting connecter gate and out_mode, that allow
connector do rockchip_drm_crtc_mode_config after mode set.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
|
|
If drm core requests a async commit, rockchip_drm_atomic_commit
will schedule a work task to update later.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
|
|
Rk3288 vop timing registers is immediately register, when configure
timing on display active time, will cause tearing. use dclk reset is
not a good idea to avoid this tearing. we can avoid tearing by using
standby register.
Vop standby register will take effect at end of current frame, and
go back to work immediately when exit standby.
So we can use standby register to protect this context.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
|
|
Rockchip vop not support hw vblank counter, needed check the committed
register if it's really take effect.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
|
|
For vop, power by enable/disable is more suitable then legacy dpms
function, and enable/disable more closely to the new atomic API.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
|
|
No functional update, drm_vblank_* is the legacy version of
drm_crtc_vblank_*. and use new api make driver more clean.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
|
|
This merges '5b726e06d6e8309e5c9ef4109a32caf27c71dfc8' into drm-next
Just to resolve some merges to make Daniel's life easier.
Signed-off-by: DAve Airlie <airlied@redhat.com>
|
|
git://anongit.freedesktop.org/drm-intel
Pull i915 drm fixes from Jani Nikula:
"Here's a batch of i915 fixes all around. It may be slightly bigger
than one would hope for at this stage, but they've all been through
testing in our -next before being picked up for v4.4. Also, I missed
Dave's fixes pull earlier today just because I wanted an extra testing
round on this. So I'm fairly confident.
Wishing you all the things it is customary to wish this time of the
year"
* tag 'drm-intel-fixes-2015-12-23' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Correct max delay for HDMI hotplug live status checking
drm/i915: mdelay(10) considered harmful
drm/i915: Kill intel_crtc->cursor_bo
drm/i915: Workaround CHV pipe C cursor fail
drm/i915: Only spin whilst waiting on the current request
drm/i915: Limit the busy wait on requests to 5us not 10ms!
drm/i915: Break busywaiting for requests on pending signals
drm/i915: Disable primary plane if we fail to reconstruct BIOS fb (v2)
drm/i915: Set the map-and-fenceable flag for preallocated objects
drm/i915: Drop the broken cursor base==0 special casing
|
|
The total delay of HDMI hotplug detecting with 30ms is sometimes not
enoughtfor HDMI live status up with specific HDMI monitors in BSW platform.
After doing experiments for following monitors, it needs 80ms at least
for those worst cases.
Lenovo L246 1xwA (4 failed, necessary hot-plug delay: 58/40/60/40ms)
Philips HH2AP (9 failed, necessary hot-plug delay: 80/50/50/60/46/40/58/58/39ms)
BENQ ET-0035-N (6 failed, necessary hot-plug delay: 60/50/50/80/80/40ms)
DELL U2713HM (2 failed, necessary hot-plug delay: 58/59ms)
HP HP-LP2475w (5 failed, necessary hot-plug delay: 70/50/40/60/40ms)
It looks like 70-80 ms is BSW platform needs in some bad cases of the
monitors at this end (8 times delay at most). Keep less than 100ms for
HDCP pulse HPD low (with at least 100ms) to respond a plug out.
Reviewed-by: Cooper Chiou <cooper.chiou@intel.com>
Tested-by: Gary Wang <gary.c.wang@intel.com>
Cc: Gavin Hindman <gavin.hindman@intel.com>
Cc: Sonika Jindal <sonika.jindal@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Gary Wang <gary.c.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450858295-12804-1-git-send-email-gary.c.wang@intel.com
Tested-by: Shobhit Kumar <shobhit.kumar@intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Fixes: 237ed86c693d ("drm/i915: Check live status before reading edid")
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Atomic changes broke check_digital_port_conflicts(). It needs to look
at the global situation instead of just trying to find a conflict
within the current atomic state.
This bug made my HSW explode spectacularly after I had split the DDI
encoders into separate DP and HDMI encoders. With the fix, things
seem much more solid.
I hope holding the connection_mutex is enough protection that we can
actually walk the connectors even if they're not part of the current
atomic state...
v2: Regenerate the patch so that it actually applies (Jani)
Cc: stable@vger.kernel.org
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Fixes: 5448a00d3f06 ("drm/i915: Don't use staged config in check_digital_port_conflicts()")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449764551-12466-1-git-send-email-ville.syrjala@linux.intel.com
(cherry picked from commit 0bff4858653312a10c83709e0009c3adb87e6f1e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Conflicts:
drivers/gpu/drm/i915/intel_pm.c
|
|
git://anongit.freedesktop.org/drm-intel into drm-next
- fix atomic watermark recomputation logic (Maarten)
- modeset sequence fixes for LPT (Ville)
- more kbl enabling&prep work (Rodrigo, Wayne)
- first bits for mst audio
- page dirty tracking fixes from Dave Gordon
- new get_eld hook from Takashi, also included in the sound tree
- fixup cursor handling when placed at address 0 (Ville)
- refactor VBT parsing code (Jani)
- rpm wakelock debug infrastructure ( Imre)
- fbdev is pinned again (Chris)
- tune the busywait logic to avoid wasting cpu cycles (Chris)
* tag 'drm-intel-next-2015-12-18' of git://anongit.freedesktop.org/drm-intel: (81 commits)
drm/i915: Update DRIVER_DATE to 20151218
drm/i915/skl: Default to noncoherent access up to F0
drm/i915: Only spin whilst waiting on the current request
drm/i915: Limit the busy wait on requests to 5us not 10ms!
drm/i915: Break busywaiting for requests on pending signals
drm/i915: don't enable autosuspend on platforms without RPM support
drm/i915/backlight: prefer dev_priv over dev pointer
drm/i915: Disable primary plane if we fail to reconstruct BIOS fb (v2)
drm/i915: Pin the ifbdev for the info->system_base GGTT mmapping
drm/i915: Set the map-and-fenceable flag for preallocated objects
drm/i915: mdelay(10) considered harmful
drm/i915: check that we are in an RPM atomic section in GGTT PTE updaters
drm/i915: add support for checking RPM atomic sections
drm/i915: check that we hold an RPM wakelock ref before we put it
drm/i915: add support for checking if we hold an RPM reference
drm/i915: use assert_rpm_wakelock_held instead of opencoding it
drm/i915: add assert_rpm_wakelock_held helper
drm/i915: remove HAS_RUNTIME_PM check from RPM get/put/assert helpers
drm/i915: get a permanent RPM reference on platforms w/o RPM support
drm/i915: refactor RPM disabling due to RC6 being disabled
...
|
|
into drm-next
[airlied: fixup build problems on arm - added errno.h include]
* 'drm-next-4.5' of git://people.freedesktop.org/~agd5f/linux: (152 commits)
amd/powerplay: fix copy paste typo in hardwaremanager.c
amd/powerplay: disable powerplay by default initially
amd/powerplay: don't enable ucode fan control if vbios has no fan table
drm/amd/powerplay: show gpu load when print gpu performance for Cz. (v2)
drm/amd/powerplay: check whether need to enable thermal control. (v2)
drm/amd/powerplay: add point check to avoid NULL point hang.
drm/amdgpu/powerplay: Program a calculated value as Deep Sleep clock.
drm/amd/powerplay: Don't return an error if fan table is missing
drm/powerplay/hwmgr: log errors in tonga_hwmgr_backend_init
drm/powerplay: add debugging output to processpptables.c
drm/powerplay: add debugging output to tonga_processpptables.c
amd/powerplay: Add structures required to report configuration change
amd/powerplay: Fix get dal power level
amd\powerplay Implement get dal power level
drm/amd/powerplay: display gpu load when print performance for tonga.
drm/amdgpu/powerplay: enable sysfs and debugfs interfaces late
drm/amd/powerplay: move shared function of vi to hwmgr. (v2)
drm/amd/powerplay: check whether enable dpm in powerplay.
drm/amd/powerplay: fix bug that dpm funcs in debugfs/sysfs missing.
drm/amd/powerplay: fix boolreturn.cocci warnings
...
|
|
git://ftp.arm.linux.org.uk/~rmk/linux-arm into drm-next
These changes from Liviu add support for atomic mode setting, add the
TMDS clock limitation according to the device, and ensure that we
correctly clean up in the unbind function.
* 'drm-tda998x-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
drm/i2c: tda998x: Add support for atomic modesetting
drm/i2c: tda998x: increase the supported dotclock frequency to 165MHz for TDA19988
drm/i2c: tda998x: unregister the connector in the unbind function
|
|
into drm-next
These are the patches from Daniel Vetter, getting rid of struct_mutex
from the Armada DRM driver.
* 'drm-armada-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
drm/armada: use a private mutex to protect priv->linear
drm/armada: drop struct_mutex from cursor paths
drm/armada: don't grab dev->struct_mutex for in mmap offset ioctl
drm/armada: plug leak in dumb_map_offset
drm/armada: use unlocked gem unreferencing
|
|
When the crtc is configured but not active we currently clip to (0,0)x(0,0).
This results in differences in calculations depending on dpms setting.
When the crtc is enabled but not active run check_plane as if it were on,
but afterwards set plane_state->visible = false for the checks.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1447945645-32005-13-git-send-email-maarten.lankhorst@linux.intel.com
|
|
On skylake when calculating plane visibility with the crtc in
dpms off mode the real cdclk may be different from what it would be
if the crtc was active. This may result in a WARN_ON(cdclk < crtc_clock)
from skl_max_scale. The fix is to keep a atomic_cdclk that would be true
if all crtc's were active.
This is required to get the same calculations done correctly regardless
of dpms mode.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1447945645-32005-12-git-send-email-maarten.lankhorst@linux.intel.com
|
|
Parallel modesets are still not allowed, but this will allow updating
a different crtc during a modeset if the clock is not changed.
Additionally when all pipes are DPMS off the cdclk will be lowered
to the minimum allowed.
Changes since v1:
- Add dev_priv->active_crtcs for tracking which crtcs are active.
- Rename min_cdclk to min_pixclk and move to dev_priv.
- Add a active_crtcs mask which is updated atomically.
- Add intel_atomic_state->modeset which is set on modesets.
- Commit new pixclk/active_crtcs right after state swap.
Changes since v2:
- Make the changes related to max_pixel_rate calculations more readable.
Changes since v3:
- Add cherryview and missing WARN_ON to readout.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
This fixes a warning when the crtc is turned off. In that case fb
will be NULL, and crtc_clock will be 0. Because the crtc is no longer
active this is not a bug, and shouldn't trigger the WARN_ON.
Also remove handling a null crtc_state, with all transitional helpers
gone this can no longer happen.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1448360945-5723-2-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
Add an overview and documentation for the VBT/BDB header structures.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/3d826d4600688ca3518713776ab5bd8a8fc9f20f.1450702954.git.jani.nikula@intel.com
|
|
Atomic changes broke check_digital_port_conflicts(). It needs to look
at the global situation instead of just trying to find a conflict
within the current atomic state.
This bug made my HSW explode spectacularly after I had split the DDI
encoders into separate DP and HDMI encoders. With the fix, things
seem much more solid.
I hope holding the connection_mutex is enough protection that we can
actually walk the connectors even if they're not part of the current
atomic state...
v2: Regenerate the patch so that it actually applies (Jani)
Cc: stable@vger.kernel.org
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Fixes: 5448a00d3f06 ("drm/i915: Don't use staged config in check_digital_port_conflicts()")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449764551-12466-1-git-send-email-ville.syrjala@linux.intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
There was a silent conflict between
commit 0a878716265e9af9f697264dc2e858fcc060d833
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Oct 15 14:23:01 2015 +0200
drm/i915: restore ggtt double-bind avoidance
and
commit 5bab6f60cb4d1417ad7c599166bcfec87529c1a2
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri Oct 23 18:43:32 2015 +0100
drm/i915: Serialise updates to GGTT with access through GGTT on Braswell
thankfully caught by the extra WARN safegaurd in 0a878716. Since we now
override the GGTT insert_pages callback when installing the aliasing
ppgtt, we assert that the callback is the original ggtt routine.
However, on Braswell we now use a different insertion routine to
serialise access through the GGTT with updating the PTE and hence the
conflict. To avoid the conflict, move the custom insertion routine for
Braswell down a level.
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1447859979-20107-1-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit c140330b5e6b5bc2262ffb2f50bfeea06a482699)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The total delay of HDMI hotplug detecting with 30ms have already
been split into a resolution of 3 retries of 10ms each, for the worst
cases. But it still suffered from only waiting 10ms at most in
intel_hdmi_detect(). This patch corrects it by reading hotplug status
with 4 times at most for 30ms delay.
v2:
- straight up to loop execution for more clear in code readability
- mdelay will replace with msleep by Daniel's new patch
drm/i915: mdelay(10) considered harmful
- suggest to re-evaluate try times for being compatible to old HDMI monitor
Reviewed-by: Cooper Chiou <cooper.chiou@intel.com>
Tested-by: Gary Wang <gary.c.wang@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Gavin Hindman <gavin.hindman@intel.com>
Cc: Sonika Jindal <sonika.jindal@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Gary Wang <gary.c.wang@intel.com>
[danvet: fixup conflict with s/mdelay/msleep/ patch.]
Cc: drm-intel-fixes@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 61fb3980dd396880ffba48523b1e27579868b82b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
I missed this myself when reviewing
commit 237ed86c693d8a8e4db476976aeb30df4deac74b
Author: Sonika Jindal <sonika.jindal@intel.com>
Date: Tue Sep 15 09:44:20 2015 +0530
drm/i915: Check live status before reading edid
Long sleeps like this really shouldn't waste cpu cycles spinning.
Cc: Sonika Jindal <sonika.jindal@intel.com>
Cc: "Wang, Gary C" <gary.c.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449859455-32609-1-git-send-email-daniel.vetter@ffwll.ch
Reviewed-by: Sonika Jindal <sonika.jindal@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 71a199bacb398ee54eeac001699257dda083a455)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The vma may have been rebound between the last time the cursor was
enabled and now, so skipping the cursor gtt offset deduction is not
safe unless we would also reset cursor_bo to NULL when disabling the
cursor. Just thow cursor_bo to the bin instead since it's lost all
other uses thanks to universal plane support.
Chris pointed out that cursor updates are currently too slow
via universal planes that micro optimizations like these wouldn't
even help.
v2: Add a note about futility of micro optimizations (Chris)
Cc: drm-intel-fixes@lists.freedesktop.org
References: http://lists.freedesktop.org/archives/intel-gfx/2015-December/082976.html
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450107302-17171-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 1264859d648c4bdc9f0a098efbff90cbf462a075)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Turns out CHV pipe C was glued on somewhat poorly, and there's something
wrong with the cursor. If the cursor straddles the left screen edge,
and is then moved away from the edge or disabled, the pipe will often
underrun. If enough underruns are triggered quickly enough the pipe
will fall over and die (it just scans out a solid color and reports
a constant underrun). We need to turn the disp2d power well off and
on again to recover the pipe.
None of that is very nice for the user, so let's just refuse to place
the cursor in the compromised position. The ddx appears to fall back
to swcursor when the ioctl returns an error, so theoretically there's
no loss of functionality for the user (discounting swcursor bugs).
I suppose most cursors images actually have the hotspot not exactly
at 0,0 so under typical conditions the fallback will in fact kick in
as soon as the cursor touches the left edge of the screen.
Any atomic compositor should anyway be prepared to fall back to
GPU composition when things don't work out, so there should be no
problem with those.
Other things that I tried to solve this include flipping all
display related clock gating knobs I could find, increasing the
minimum gtt alignment all the way up to 512k. I also tried to see
if there are more specific screen coordinates that hit the bug, but
the findings were somewhat inconclusive. Sometimes the failures
happen almost across the whole left edge, sometimes more at the very
top and around the bottom half. I wasn't able to find any real pattern
to these variations, so it seems our only choice is to just refuse
to straddle the left screen edge at all.
Cc: stable@vger.kernel.org
Cc: Jason Plum <max@warheads.net>
Testcase: igt/kms_chv_cursor_fail
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92826
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450459479-16286-1-git-send-email-ville.syrjala@linux.intel.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit b29ec92c4f5e6d45d8bae8194e664427a01c6687)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Limit busywaiting only to the request currently being processed by the
GPU. If the request is not currently being processed by the GPU, there
is a very low likelihood of it being completed within the 2 microsecond
spin timeout and so we will just be wasting CPU cycles.
v2: Check for logical inversion when rebasing - we were incorrectly
checking for this request being active, and instead busywaiting for
when the GPU was not yet processing the request of interest.
v3: Try another colour for the seqno names.
v4: Another colour for the function names.
v5: Remove the forced coherency when checking for the active request. On
reflection and plenty of recent experimentation, the issue is not a
cache coherency problem - but an irq/seqno ordering problem (timing issue).
Here, we do not need the w/a to force ordering of the read with an
interrupt.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: "Rogozhkin, Dmitry V" <dmitry.v.rogozhkin@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Eero Tamminen <eero.t.tamminen@intel.com>
Cc: "Rantala, Valtteri" <valtteri.rantala@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449833608-22125-4-git-send-email-chris@chris-wilson.co.uk
(cherry picked from commit 821485dc2ad665f136c57ee589bf7a8210160fe2)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
When waiting for high frequency requests, the finite amount of time
required to set up the irq and wait upon it limits the response rate. By
busywaiting on the request completion for a short while we can service
the high frequency waits as quick as possible. However, if it is a slow
request, we want to sleep as quickly as possible. The tradeoff between
waiting and sleeping is roughly the time it takes to sleep on a request,
on the order of a microsecond. Based on measurements of synchronous
workloads from across big core and little atom, I have set the limit for
busywaiting as 10 microseconds. In most of the synchronous cases, we can
reduce the limit down to as little as 2 miscroseconds, but that leaves
quite a few test cases regressing by factors of 3 and more.
The code currently uses the jiffie clock, but that is far too coarse (on
the order of 10 milliseconds) and results in poor interactivity as the
CPU ends up being hogged by slow requests. To get microsecond resolution
we need to use a high resolution timer. The cheapest of which is polling
local_clock(), but that is only valid on the same CPU. If we switch CPUs
because the task was preempted, we can also use that as an indicator that
the system is too busy to waste cycles on spinning and we should sleep
instead.
__i915_spin_request was introduced in
commit 2def4ad99befa25775dd2f714fdd4d92faec6e34 [v4.2]
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue Apr 7 16:20:41 2015 +0100
drm/i915: Optimistically spin for the request completion
v2: Drop full u64 for unsigned long - the timer is 32bit wraparound safe,
so we can use native register sizes on smaller architectures. Mention
the approximate microseconds units for elapsed time and add some extra
comments describing the reason for busywaiting.
v3: Raise the limit to 10us
v4: Now 5us.
Reported-by: Jens Axboe <axboe@kernel.dk>
Link: https://lkml.org/lkml/2015/11/12/621
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: "Rogozhkin, Dmitry V" <dmitry.v.rogozhkin@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Eero Tamminen <eero.t.tamminen@intel.com>
Cc: "Rantala, Valtteri" <valtteri.rantala@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449833608-22125-3-git-send-email-chris@chris-wilson.co.uk
(cherry picked from commit ca5b721e238226af1d767103ac852aeb8e4c0764)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The busywait in __i915_spin_request() does not respect pending signals
and so may consume the entire timeslice for the task instead of
returning to userspace to handle the signal.
In the worst case this could cause a delay in signal processing of 20ms,
which would be a noticeable jitter in cursor tracking. If a higher
resolution signal was being used, for example to provide fairness of a
server timeslices between clients, we could expect to detect some
unfairness between clients (i.e. some windows not updating as fast as
others). This issue was noticed when inspecting a report of poor
interactivity resulting from excessively high __i915_spin_request usage.
Fixes regression from
commit 2def4ad99befa25775dd2f714fdd4d92faec6e34 [v4.2]
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue Apr 7 16:20:41 2015 +0100
drm/i915: Optimistically spin for the request completion
v2: Try to assess the impact of the bug
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc; "Rogozhkin, Dmitry V" <dmitry.v.rogozhkin@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Eero Tamminen <eero.t.tamminen@intel.com>
Cc: "Rantala, Valtteri" <valtteri.rantala@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449833608-22125-2-git-send-email-chris@chris-wilson.co.uk
(cherry picked from commit 91b0c352ace9afec1fb51590c7b8bd60e0eb9fbd)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
If we fail to reconstruct the BIOS fb (e.g., because the FB is too
large), we'll be left with plane state that indicates the primary plane
is visible yet has a NULL fb. This mismatch causes problems later on
(e.g., for the watermark code). Since we've failed to reconstruct the
BIOS FB, the best solution is to just disable the primary plane and
pretend the BIOS never had it enabled.
v2: Add intel_pre_disable_primary() call (Maarten)
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449171462-30763-2-git-send-email-matthew.d.roper@intel.com
(cherry picked from commit 200757f5d7c6f7f7032a0a07bbb8c02a840bbf7d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
As we mark the preallocated objects as bound, we should also flag them
correctly as being map-and-fenceable (if appropriate!) so that later
users do not get confused and try and rebind the pinned vma in order to
get a map-and-fenceable binding.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: "Goel, Akash" <akash.goel@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: drm-intel-fixes@lists.freedesktop.org
Link: http://patchwork.freedesktop.org/patch/msgid/1448029000-10616-1-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit d0710abbcd88b1ff17760e97d74a673e67b49ea1)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The cursor code tries to treat base==0 to mean disabled. That fails
when the cursor bo gets bound at ggtt offset 0, and the user is left
looking at an invisible cursor.
We lose the disabled->disabled optimization, but that seems like
something better handled at a slightly higher level.
Cc: drm-intel-fixes@lists.freedesktop.org
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450091808-32607-3-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 663f3122d00c0b412d429f105dca129aa8f4f094)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Using __stringify(x) instead of #x adds support for macros as
a parameter and compile-time concatenation reduces the runtime
overhead.
Slightly increases the .text size but should not matter.
v2:
- Define I915_STATE_WARN_ON though I915_STATE_WARN
(Bikeshed inspiration by Chris)
v3:
- More specific commit message
v4:
- Do not directly pass arbitary string as format, instead
guard with "%s" (Dave)
Cc: Rob Clark <robdclark@gmail.com>
Cc: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v3)
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450441647-23924-3-git-send-email-joonas.lahtinen@linux.intel.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Take advantage of WARN return value to simplify the flow.
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450441647-23924-2-git-send-email-joonas.lahtinen@linux.intel.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
drm-next
I've decided to just send this fixes-for-next pull request now, even if
we don't have a patch for the CONFIG_PM_SLEEP build failure reviewed.
If you like my patch for that, I'd be happy to see it applied directly.
This pull request brings in little fixes from Dan Carpenter for the 3D
support added in this -next cycle.
* tag 'drm-vc4-next-2015-12-21' of http://github.com/anholt/linux:
drm/vc4: fix an error code
drm/vc4: allocate enough memory in vc4_save_hang_state()
drm/vc4: copy_to_user() returns the number of bytes remaining
|
|
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
