| Age | Commit message (Collapse) | Author |
|---|
|
First release of GuC for Meteorlake.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230504202252.1104212-3-John.C.Harrison@Intel.com
|
|
When reduced version firmware files were added (matching major
component being the only strict requirement), the minor version was
still tracked and a notification reported if it was older. However,
the patch version should really be tracked as well for the same
reasons. The KMD can work without the change but if the effort has
been taken to release a new firmware with the change then there must
be a valid reason for doing so - important bug fix, security fix, etc.
And in that case it would be good to alert the user if they are
missing out on that new fix.
v2: Use correct patch version number and drop redunant debug print
(review by Daniele / CI results).
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230504202252.1104212-2-John.C.Harrison@Intel.com
|
|
If we disable vblank when entering self-refresh, vblank APIs (like
DRM_IOCTL_WAIT_VBLANK) no longer work. But user space is not aware when
we enter self-refresh, so this appears to be an API violation -- that
DRM_IOCTL_WAIT_VBLANK fails with EINVAL whenever the display is idle and
enters self-refresh.
The downstream driver used by many of these systems never used to
disable vblank for PSR, and in fact, even upstream, we didn't do that
until radically redesigning the state machine in commit 6c836d965bad
("drm/rockchip: Use the helpers for PSR").
Thus, it seems like a reasonable API fix to simply restore that
behavior, and leave vblank enabled.
Note that this appears to potentially unbalance the
drm_crtc_vblank_{off,on}() calls in some cases, but:
(a) drm_crtc_vblank_on() documents this as OK and
(b) if I do the naive balancing, I find state machine issues such that
we're not in sync properly; so it's easier to take advantage of (a).
This issue was exposed by IGT's kms_vblank tests, and reported by
KernelCI. The bug has been around a while (longer than KernelCI
noticed), but was only exposed once self-refresh was bugfixed more
recently, and so KernelCI could properly test it. Some other notes in:
https://lore.kernel.org/dri-devel/Y6OCg9BPnJvimQLT@google.com/
Re: renesas/master bisection: igt-kms-rockchip.kms_vblank.pipe-A-wait-forked on rk3399-gru-kevin
== Backporting notes: ==
Marking as 'Fixes' commit 6c836d965bad ("drm/rockchip: Use the helpers
for PSR"), but it probably depends on commit bed030a49f3e
("drm/rockchip: Don't fully disable vop on self refresh") as well.
We also need the previous patch ("drm/atomic: Allow vblank-enabled +
self-refresh "disable""), of course.
v3:
* no update
v2:
* skip unnecessary lock/unlock
Fixes: 6c836d965bad ("drm/rockchip: Use the helpers for PSR")
Cc: <stable@vger.kernel.org>
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Link: https://lore.kernel.org/dri-devel/Y5itf0+yNIQa6fU4@sirena.org.uk/
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230109171809.v3.2.Ic07cba4ab9a7bd3618a9e4258b8f92ea7d10ae5a@changeid
|
|
The self-refresh helper framework overloads "disable" to sometimes mean
"go into self-refresh mode," and this mode activates automatically
(e.g., after some period of unchanging display output). In such cases,
the display pipe is still considered "on", and user-space is not aware
that we went into self-refresh mode. Thus, users may expect that
vblank-related features (such as DRM_IOCTL_WAIT_VBLANK) still work
properly.
However, we trigger the WARN_ONCE() here if a CRTC driver tries to leave
vblank enabled.
Add a different expectation: that CRTCs *should* leave vblank enabled
when going into self-refresh.
This patch is preparation for another patch -- "drm/rockchip: vop: Leave
vblank enabled in self-refresh" -- which resolves conflicts between the
above self-refresh behavior and the API tests in IGT's kms_vblank test
module.
== Some alternatives discussed: ==
It's likely that on many display controllers, vblank interrupts will
turn off when the CRTC is disabled, and so in some cases, self-refresh
may not support vblank. To support such cases, we might consider
additions to the generic helpers such that we fire vblank events based
on a timer.
However, there is currently only one driver using the common
self-refresh helpers (i.e., rockchip), and at least as of commit
bed030a49f3e ("drm/rockchip: Don't fully disable vop on self refresh"),
the CRTC hardware is powered enough to continue to generate vblank
interrupts.
So we chose the simpler option of leaving vblank interrupts enabled. We
can reevaluate this decision and perhaps augment the helpers if/when we
gain a second driver that has different requirements.
v3:
* include discussion summary
v2:
* add 'ret != 0' warning case for self-refresh
* describe failing test case and relation to drm/rockchip patch better
Cc: <stable@vger.kernel.org> # dependency for "drm/rockchip: vop: Leave
# vblank enabled in self-refresh"
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230109171809.v3.1.I3904f697863649eb1be540ecca147a66e42bfad7@changeid
|
|
With CONFIG_DRM_I915_WERROR=y, we enable kernel-doc check for both
objects and headers. Now that the kernel-doc warnings have been fixed,
also enable kernel-doc -Werror to fail the build on kernel-doc warnings.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/68ffcad0e6ff2b6cd70c6df28822f967898ce197.1683041799.git.jani.nikula@intel.com
|
|
drivers/gpu/drm/i915/gem/i915_gem_ttm.h:50: warning: Function parameter or member 'bo' not described in 'i915_ttm_to_gem'
v2: Fix return value documentation while at it (Rodrigo)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230504092320.1787627-1-jani.nikula@intel.com
|
|
Can't document function pointer members as if they are functions.
drivers/gpu/drm/i915/i915_scatterlist.h:160: warning: Incorrect use of kernel-doc format: * release() - Free the memory of the struct i915_refct_sgt
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a0c099707ec4f1911b14b0f286848a298b2b29e0.1683041799.git.jani.nikula@intel.com
|
|
You can't document function pointer member as functions.
drivers/gpu/drm/i915/gem/i915_gem_region.h:25: warning: Incorrect use of kernel-doc format: * process_obj - Process the current object
drivers/gpu/drm/i915/gem/i915_gem_region.h:35: warning: Function parameter or member 'process_obj' not described in 'i915_gem_apply_to_region_ops'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a2a81f9ee78591def0534c81a63dbc652c44bbd3.1683041799.git.jani.nikula@intel.com
|
|
You can't document both a sub-struct type and a struct member at the
same time. Separate them.
drivers/gpu/drm/i915/i915_vma_resource.h:91: warning: Incorrect use of kernel-doc format: * struct i915_vma_bindinfo - Information needed for async bind
drivers/gpu/drm/i915/i915_vma_resource.h:129: warning: Function parameter or member 'bi' not described in 'i915_vma_resource'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/89ab5cf179566c429383cc57db746038f75cba0d.1683041799.git.jani.nikula@intel.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
Add missing GPU transcoder masks for MTL and fix DSI power on sequence
for Nextbook Ares 8A. Fix GuC version corner case.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZFOskabVuN45dNaA@jlahtine-mobl.ger.corp.intel.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-fixes-6.4-2023-05-03:
amdgpu:
- GPU reset fixes
- Doorbell fix when resizing BARs
- Fix spurious warnings in gmc
- Locking fix for AMDGPU_SCHED IOCTL
- SR-IOV fix
- DCN 3.1.4 fix
- DCN 3.2 fix
- Fix job cleanup when CS is aborted
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230504034018.7950-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
One cc stable for pipe source size check on SKL+
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZEpbSG1ZOSVqzGLx@jlahtine-mobl.ger.corp.intel.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-fixes-6.4-2023-04-26:
amdgpu:
- SR-IOV fixes
- DCN 3.2 fixes
- DC mclk handling fixes
- eDP fixes
- SubVP fixes
- HDCP regression fix
- DSC fixes
- DC FP fixes
- DCN 3.x fixes
- Display flickering fix when switching between vram and gtt
- Z8 power saving fix
- Fix hang when skipping modeset
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230427033012.7668-1-alexander.deucher@amd.com
|
|
The GSC notifies us of a proxy request via the HECI2 interrupt. The
interrupt must be enabled both in the HECI layer and in our usual gt irq
programming; for the latter, the interrupt is enabled via the same enable
register as the GSC CS, but it does have its own mask register. When the
interrupt is received, we also need to de-assert it in both layers.
The handling of the proxy request is deferred to the same worker that we
use for GSC load. New flags have been added to distinguish between the
init case and the proxy interrupt.
v2: Make sure not to set the reset bit when enabling/disabling the GSC
interrupts, fix defines (Alan)
v3: rebase on proxy status register check
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230502163854.317653-5-daniele.ceraolospurio@intel.com
|
|
The GSC uC needs to communicate with the CSME to perform certain
operations. Since the GSC can't perform this communication directly
on platforms where it is integrated in GT, i915 needs to transfer the
messages from GSC to CSME and back.
The proxy flow is as follow:
1 - i915 submits a request to GSC asking for the message to CSME
2 - GSC replies with the proxy header + payload for CSME
3 - i915 sends the reply from GSC as-is to CSME via the mei proxy
component
4 - CSME replies with the proxy header + payload for GSC
5 - i915 submits a request to GSC with the reply from CSME
6 - GSC replies either with a new header + payload (same as step 2,
so we restart from there) or with an end message.
After GSC load, i915 is expected to start the first proxy message chain,
while all subsequent ones will be triggered by the GSC via interrupt.
To communicate with the CSME, we use a dedicated mei component, which
means that we need to wait for it to bind before we can initialize the
proxies. This usually happens quite fast, but given that there is a
chance that we'll have to wait a few seconds the GSC work has been moved
to a dedicated WQ to not stall other processes.
v2: fix code style, includes and variable naming (Alan)
v3: add extra check for proxy status, fix includes and comments
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230502163854.317653-4-daniele.ceraolospurio@intel.com
|
|
drivers/gpu/drm/i915/i915_scatterlist.h:164: warning: Function parameter or member 'release' not described in 'i915_refct_sgt_ops'
drivers/gpu/drm/i915/i915_scatterlist.h:187: warning: Function parameter or member 'rsgt' not described in 'i915_refct_sgt_put'
drivers/gpu/drm/i915/i915_scatterlist.h:198: warning: Function parameter or member 'rsgt' not described in 'i915_refct_sgt_get'
drivers/gpu/drm/i915/i915_scatterlist.h:214: warning: Function parameter or member 'rsgt' not described in '__i915_refct_sgt_init'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0b31edbb33116c8002dd1e72d3ad25efe5dd0176.1683041799.git.jani.nikula@intel.com
|
|
Add /** to make it a kernel-doc.
drivers/gpu/drm/i915/pxp/intel_pxp_types.h:96: warning: Function parameter or member 'dev_link' not described in 'intel_pxp'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/84f89a3332fa323888f1e3241fb51ae10417ecd7.1683041799.git.jani.nikula@intel.com
|
|
The comments are closer to not being kernel-doc.
drivers/gpu/drm/i915/i915_pmu.h:21: warning: cannot understand function prototype: 'enum i915_pmu_tracked_events '
drivers/gpu/drm/i915/i915_pmu.h:32: warning: cannot understand function prototype: 'enum '
drivers/gpu/drm/i915/i915_pmu.h:41: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* How many different events we track in the global PMU mask.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7656b8f58b088c108a2a32f7089329740efabba1.1683041799.git.jani.nikula@intel.com
|
|
drivers/gpu/drm/i915/i915_active.h:66: warning: Function parameter or member 'active' not described in '__i915_active_fence_init'
drivers/gpu/drm/i915/i915_active.h:66: warning: Function parameter or member 'fence' not described in '__i915_active_fence_init'
drivers/gpu/drm/i915/i915_active.h:66: warning: Function parameter or member 'fn' not described in '__i915_active_fence_init'
drivers/gpu/drm/i915/i915_active.h:89: warning: Function parameter or member 'active' not described in 'i915_active_fence_set'
drivers/gpu/drm/i915/i915_active.h:89: warning: Function parameter or member 'rq' not described in 'i915_active_fence_set'
drivers/gpu/drm/i915/i915_active.h:102: warning: Function parameter or member 'active' not described in 'i915_active_fence_get'
drivers/gpu/drm/i915/i915_active.h:122: warning: Function parameter or member 'active' not described in 'i915_active_fence_isset'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7f201c6cb715e4b3cece78ffa893a75610ecd27d.1683041799.git.jani.nikula@intel.com
|
|
max_mmio_per_node
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:216: warning: Function parameter or member 'ads_null_cache' not described in 'intel_guc_state_capture'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:216: warning: Function parameter or member 'max_mmio_per_node' not described in 'intel_guc_state_capture'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c83878163221ed3684a6de5d5e1c5373ddd5c06f.1683041799.git.jani.nikula@intel.com
|
|
The documentation is closer to not being kernel-doc, so just drop the
kernel-doc markers.
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:27: warning: Function parameter or member 'size' not described in '__guc_capture_bufstate'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:27: warning: Function parameter or member 'data' not described in '__guc_capture_bufstate'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:27: warning: Function parameter or member 'rd' not described in '__guc_capture_bufstate'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:27: warning: Function parameter or member 'wr' not described in '__guc_capture_bufstate'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:59: warning: Function parameter or member 'link' not described in '__guc_capture_parsed_output'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:59: warning: Function parameter or member 'is_partial' not described in '__guc_capture_parsed_output'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:59: warning: Function parameter or member 'eng_class' not described in '__guc_capture_parsed_output'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:59: warning: Function parameter or member 'eng_inst' not described in '__guc_capture_parsed_output'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:59: warning: Function parameter or member 'guc_id' not described in '__guc_capture_parsed_output'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:59: warning: Function parameter or member 'lrca' not described in '__guc_capture_parsed_output'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:59: warning: Function parameter or member 'reginfo' not described in '__guc_capture_parsed_output'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:62: warning: wrong kernel-doc identifier on line:
* struct guc_debug_capture_list_header / struct guc_debug_capture_list
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:80: warning: wrong kernel-doc identifier on line:
* struct __guc_mmio_reg_descr / struct __guc_mmio_reg_descr_group
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:105: warning: wrong kernel-doc identifier on line:
* struct guc_state_capture_header_t / struct guc_state_capture_t /
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:163: warning: Function parameter or member 'is_valid' not described in '__guc_capture_ads_cache'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:163: warning: Function parameter or member 'ptr' not described in '__guc_capture_ads_cache'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:163: warning: Function parameter or member 'size' not described in '__guc_capture_ads_cache'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:163: warning: Function parameter or member 'status' not described in '__guc_capture_ads_cache'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'marker' not described in 'guc_log_buffer_state'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'read_ptr' not described in 'guc_log_buffer_state'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'write_ptr' not described in 'guc_log_buffer_state'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'size' not described in 'guc_log_buffer_state'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'sampled_write_ptr' not described in 'guc_log_buffer_state'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'wrap_offset' not described in 'guc_log_buffer_state'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'flush_to_file' not described in 'guc_log_buffer_state'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'buffer_full_cnt' not described in 'guc_log_buffer_state'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'reserved' not described in 'guc_log_buffer_state'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'flags' not described in 'guc_log_buffer_state'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'version' not described in 'guc_log_buffer_state'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9c210d53fdbd6da5fac42e435855d269504919d7.1683041799.git.jani.nikula@intel.com
|
|
drivers/gpu/drm/i915/gt/uc/intel_guc.h:274: warning: Function parameter or member 'dbgfs_node' not described in 'intel_guc'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b0f681dd82289dd86da78c6242411e8d812e51a1.1683041799.git.jani.nikula@intel.com
|
|
drivers/gpu/drm/i915/gt/intel_engine_types.h:293: warning: Function parameter or member 'preempt_hang' not described in 'intel_engine_execlists'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/dafd771bb75cf14965dd3b666987c58a438de134.1683041799.git.jani.nikula@intel.com
|
|
drivers/gpu/drm/i915/gt/intel_gtt.h:515: warning: Function parameter or member 'vm' not described in 'i915_vm_resv_put'
drivers/gpu/drm/i915/gt/intel_gtt.h:515: warning: Excess function parameter 'resv' description in 'i915_vm_resv_put'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c22e58e770019667980b3617f6e963b76d7e79a7.1683041799.git.jani.nikula@intel.com
|
|
drivers/gpu/drm/i915/gt/intel_context.h:108: warning: Function parameter or member 'ce' not described in 'intel_context_lock_pinned'
drivers/gpu/drm/i915/gt/intel_context.h:123: warning: Function parameter or member 'ce' not described in 'intel_context_is_pinned'
drivers/gpu/drm/i915/gt/intel_context.h:142: warning: Function parameter or member 'ce' not described in 'intel_context_unlock_pinned'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8359a1cef6b5ab268a9dcc1a382281b6e39cfa64.1683041799.git.jani.nikula@intel.com
|
|
drivers/gpu/drm/i915/gt/intel_engine_cs.c:1525: warning: expecting prototype for intel_engines_cleanup_common(). Prototype was for intel_engine_cleanup_common() instead
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/33f8dfdf38be3e16675971e6983e3e300d4301a6.1683041799.git.jani.nikula@intel.com
|
|
drivers/gpu/drm/i915/gem/i915_gem_object.h:94: warning: Function parameter or member 'file' not described in 'i915_gem_object_lookup_rcu'
drivers/gpu/drm/i915/gem/i915_gem_object.h:94: warning: Excess function parameter 'filp' description in 'i915_gem_object_lookup_rcu'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/80c96863b7a0755aaa07efb49bcccd9ba620c6d7.1683041799.git.jani.nikula@intel.com
|
|
The documentation is closer to not being kernel-doc. Just drop the
kernel-doc /** indicators.
drivers/gpu/drm/i915/i915_request.h:176: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Request queue structure.
drivers/gpu/drm/i915/i915_request.h:477: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Returns true if seq1 is later than seq2.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/62a7a0f6e5b33e59ef4339304d01e7ef7ee04430.1683041799.git.jani.nikula@intel.com
|
|
drivers/gpu/drm/i915/i915_gpu_error.c:2174: warning: Function parameter or member 'dump_flags' not described in 'i915_capture_error_state'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20524292b002800975d82d23b5bd47da878f1733.1683041799.git.jani.nikula@intel.com
|
|
drivers/gpu/drm/i915/i915_perf.c:5307: warning: Function parameter or member 'i915' not described in 'i915_perf_ioctl_version'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b93ddb95a15d1376936349b32c7facb35c76be82.1683041799.git.jani.nikula@intel.com
|
|
drivers/gpu/drm/i915/i915_vma_resource.h:129: warning: Function parameter or member 'wakeref' not described in 'i915_vma_resource'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/50389365e095dc564ab5f1f1e3647934163ffefa.1683041799.git.jani.nikula@intel.com
|
|
The parameters aren't documented, and the file isn't included in Sphinx
build anyway, so demote the kernel-doc to a regular comment.
drivers/gpu/drm/i915/i915_utils.h:284: warning: Function parameter or member 'OP' not described in '__wait_for'
drivers/gpu/drm/i915/i915_utils.h:284: warning: Function parameter or member 'COND' not described in '__wait_for'
drivers/gpu/drm/i915/i915_utils.h:284: warning: Function parameter or member 'US' not described in '__wait_for'
drivers/gpu/drm/i915/i915_utils.h:284: warning: Function parameter or member 'Wmin' not described in '__wait_for'
drivers/gpu/drm/i915/i915_utils.h:284: warning: Function parameter or member 'Wmax' not described in '__wait_for'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e6e33a7f03c4a78739fa96e6ae74eb272ae147e7.1683041799.git.jani.nikula@intel.com
|
|
drivers/gpu/drm/i915/i915_vma.h:145: warning: expecting prototype for i915_vma_offset(). Prototype was for i915_vma_size() instead
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9fd58398ba6f86c55cc7a7c62efeab70c3311d59.1683041799.git.jani.nikula@intel.com
|
|
drivers/gpu/drm/i915/gvt/aperture_gm.c:344: warning: Function parameter or member 'conf' not described in 'intel_vgpu_alloc_resource'
drivers/gpu/drm/i915/gvt/aperture_gm.c:344: warning: Excess function parameter 'param' description in 'intel_vgpu_alloc_resource'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9213214c9caa296ebd349a5d5b44c2bbb45cdf99.1683041799.git.jani.nikula@intel.com
|
|
If PLL locking failed, the regulator needs to be disabled again.
Fixes: 5664e3c907e2 ("drm/bridge: ti-sn65dsi83: Add vcc supply regulator support")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230504065316.2640739-1-alexander.stein@ew.tq-group.com
|
|
After commit 3fb16866b51d ("driver core: fw_devlink: Make cycle
detection more robust"), fw_devlink prints an error when consumer
devices don't have their fwnode set. This used to be ignored silently.
Set the fwnode mipi_dsi_device so fw_devlink can find them and properly
track their dependencies.
This fixes errors like this:
[ 0.334054] nwl-dsi 30a00000.mipi-dsi: Failed to create device link with regulator-lcd-1v8
[ 0.346964] nwl-dsi 30a00000.mipi-dsi: Failed to create device link with backlight-dsi
Reported-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Link: https://lore.kernel.org/lkml/2a8e407f4f18c9350f8629a2b5fa18673355b2ae.camel@puri.sm/
Fixes: 068a00233969 ("drm: Add MIPI DSI bus support")
Signed-off-by: Saravana Kannan <saravanak@google.com>
Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Link: https://lore.kernel.org/r/20230310063910.2474472-1-saravanak@google.com
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
Once command submission failed due to userptr invalidation in
amdgpu_cs_submit, legacy code will perform cleanup of scheduler
job. However, it's not needed at all, as former commit has integrated
job cleanup stuff into amdgpu_job_free. Otherwise, because of double
free, a NULL pointer dereference will occur in such scenario.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2457
Fixes: f7d66fb2ea43 ("drm/amdgpu: cleanup scheduler job initialization v2")
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
[Why]
Reading pipe_fuses from register may have invalid bits set, which may
affect the num_pipes erroneously.
[How]
Add read_pipes_fuses() call and filter bits based on expected number
of pipes.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
|
|
[Why & How]
Previous Z8 watermark values were causing flickering and OTC underflow.
Updating Z8 watermark values based on the measurement.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
This WPTR_POLL_ENABLE is a hardware contigious polling which will cause
FCLK and UCLK to keep on a high level.
Mostly its case can be covered by F32_WPTR_POLL_ENABLE which polls by
firmware.
So to save power, SR-IOV also needs to disable this bit
Signed-off-by: Horace Chen <horace.chen@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
mgr->ctx_handles should be protected by mgr->lock.
v2: improve commit message
v3: add a Fixes tag
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Fixes: 52c6a62c64fa ("drm/amdgpu: add interface for editing a foreign process's priority v3")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
As made mention of in commit 08c677cb0b43 ("drm/amdgpu: fix
amdgpu_irq_put call trace in gmc_v10_0_hw_fini") and commit 13af556104fa
("drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v11_0_hw_fini"). It
is meaningless to call amdgpu_irq_put() for gmc.ecc_irq. So, remove it
from gmc_v9_0_hw_fini().
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2522
Fixes: 3029c855d79f ("drm/amdgpu: Fix desktop freezed after gpu-reset")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
The gmc.ecc_irq is enabled by firmware per IFWI setting,
and the host driver is not privileged to enable/disable
the interrupt. So, it is meaningless to use the amdgpu_irq_put
function in gmc_v10_0_hw_fini, which also leads to the call
trace.
[ 82.340264] Call Trace:
[ 82.340265] <TASK>
[ 82.340269] gmc_v10_0_hw_fini+0x83/0xa0 [amdgpu]
[ 82.340447] gmc_v10_0_suspend+0xe/0x20 [amdgpu]
[ 82.340623] amdgpu_device_ip_suspend_phase2+0x127/0x1c0 [amdgpu]
[ 82.340789] amdgpu_device_ip_suspend+0x3d/0x80 [amdgpu]
[ 82.340955] amdgpu_device_pre_asic_reset+0xdd/0x2b0 [amdgpu]
[ 82.341122] amdgpu_device_gpu_recover.cold+0x4dd/0xbb2 [amdgpu]
[ 82.341359] amdgpu_debugfs_reset_work+0x4c/0x70 [amdgpu]
[ 82.341529] process_one_work+0x21d/0x3f0
[ 82.341535] worker_thread+0x1fa/0x3c0
[ 82.341538] ? process_one_work+0x3f0/0x3f0
[ 82.341540] kthread+0xff/0x130
[ 82.341544] ? kthread_complete_and_exit+0x20/0x20
[ 82.341547] ret_from_fork+0x22/0x30
Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2522
Fixes: c8b5a95b5709 ("drm/amdgpu: Fix desktop freezed after gpu-reset")
Cc: stable@vger.kernel.org
|
|
The gmc.ecc_irq is enabled by firmware per IFWI setting,
and the host driver is not privileged to enable/disable
the interrupt. So, it is meaningless to use the amdgpu_irq_put
function in gmc_v11_0_hw_fini, which also leads to the call
trace.
[ 102.980303] Call Trace:
[ 102.980303] <TASK>
[ 102.980304] gmc_v11_0_hw_fini+0x54/0x90 [amdgpu]
[ 102.980357] gmc_v11_0_suspend+0xe/0x20 [amdgpu]
[ 102.980409] amdgpu_device_ip_suspend_phase2+0x240/0x460 [amdgpu]
[ 102.980459] amdgpu_device_ip_suspend+0x3d/0x80 [amdgpu]
[ 102.980520] amdgpu_device_pre_asic_reset+0xd9/0x490 [amdgpu]
[ 102.980573] amdgpu_device_gpu_recover.cold+0x548/0xce6 [amdgpu]
[ 102.980687] amdgpu_debugfs_reset_work+0x4c/0x70 [amdgpu]
[ 102.980740] process_one_work+0x21f/0x3f0
[ 102.980741] worker_thread+0x200/0x3e0
[ 102.980742] ? process_one_work+0x3f0/0x3f0
[ 102.980743] kthread+0xfd/0x130
[ 102.980743] ? kthread_complete_and_exit+0x20/0x20
[ 102.980744] ret_from_fork+0x22/0x30
Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2522
Fixes: c8b5a95b5709 ("drm/amdgpu: Fix desktop freezed after gpu-reset")
Cc: stable@vger.kernel.org
|
|
[Why]
The selfring doorbell aperture will change when resize FB
BAR successfully during gmc sw init, we should reorder
the sequence of enabling doorbell selfring aperture.
[How]
Move enable_doorbell_selfring_aperture from *_common_hw_init
to *_common_late_init.
This fixes the potential issue that GPU ring its own
doorbell when this device is in translated mode when
iommu is on.
v2: Remove *_enable_doorbell_aperture functions (Christian)
v3: Add comments to note that why we need enable doorbell
selfring late (Christian)
Signed-off-by: Shane Xiao <shane.xiao@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Tested-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Christian K�nig <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Below call trace and errors are observed when reloading
amdgpu driver with the module parameter reset_method=3.
It should do a default reset when loading or reloading the
driver, regardless of the module parameter reset_method.
v2: add comments inside and modify commit messages.
[ +2.180243] [drm] psp gfx command ID_LOAD_TOC(0x20) failed
and response status is (0x0)
[ +0.000011] [drm:psp_hw_start [amdgpu]] *ERROR* Failed to load toc
[ +0.000890] [drm:psp_hw_start [amdgpu]] *ERROR* PSP tmr init failed!
[ +0.020683] [drm:amdgpu_fill_buffer [amdgpu]] *ERROR* Trying to
clear memory with ring turned off.
[ +0.000003] RIP: 0010:amdgpu_bo_release_notify+0x1ef/0x210 [amdgpu]
[ +0.000004] Call Trace:
[ +0.000003] <TASK>
[ +0.000008] ttm_bo_release+0x2c4/0x330 [amdttm]
[ +0.000026] amdttm_bo_put+0x3c/0x70 [amdttm]
[ +0.000020] amdgpu_bo_free_kernel+0xe6/0x140 [amdgpu]
[ +0.000728] psp_v11_0_ring_destroy+0x34/0x60 [amdgpu]
[ +0.000826] psp_hw_init+0xe7/0x2f0 [amdgpu]
[ +0.000813] amdgpu_device_fw_loading+0x1ad/0x2d0 [amdgpu]
[ +0.000731] amdgpu_device_init.cold+0x108e/0x2002 [amdgpu]
[ +0.001071] ? do_pci_enable_device+0xe1/0x110
[ +0.000011] amdgpu_driver_load_kms+0x1a/0x160 [amdgpu]
[ +0.000729] amdgpu_pci_probe+0x179/0x3a0 [amdgpu]
Signed-off-by: lyndonli <Lyndon.Li@amd.com>
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Before this change, sienna_cichlid_get_reset_handler will always
return NULL, although the module parameter reset_method is 3
when loading amdgpu driver.
Signed-off-by: lyndonli <Lyndon.Li@amd.com>
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
GuC based register dumps in error capture logs were basically broken
for virtual engines. This can be seen in igt@gem_exec_balancer@hang:
[IGT] gem_exec_balancer: starting subtest hang
[drm] GPU HANG: ecode 12:4:e1524110, in gem_exec_balanc [6388]
[drm] GT0: GUC: No register capture node found for 0x1005 / 0xFEDC311D
[drm] GPU HANG: ecode 12:4:00000000, in gem_exec_balanc [6388]
[IGT] gem_exec_balancer: exiting, ret=0
The test causes a hang on both engines of a virtual engine context.
The engine instance zero hang gets a valid error capture but the
non-instance-zero hang does not.
Fix that by scanning through the list of pending register captures
when a hang notification for a virtual engine is received. That way,
the hang can be assigned to the correct physical engine prior to
starting the error capture process. So later on, when the error capture
handler tries to find the engine register list, it looks for one on
the correct engine.
Also, sneak in a missing blank line before a comment in the node
search code.
v2: Fix null pointer deref on non-GuC platforms.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428185636.457407-5-John.C.Harrison@Intel.com
|
|
Don't use 'xe_lp*' prefixes for register lists that are common with
Gen8.
Don't add Xe only GSC registers to pre-Xe devices that don't
even have a GSC engine.
Fix Xe_LP name.
Don't use GEN9 as a prefix for register lists that contain all GEN8
registers.
Rename the 'default_' register list prefix to 'gen8_' as that is the
more accurate name.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428185636.457407-4-John.C.Harrison@Intel.com
|
|
Remove 99% duplicated steered register list code. Also, include the
pre-Xe steered registers in the pre-Xe list generation.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428185636.457407-3-John.C.Harrison@Intel.com
|
