summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2022-10-24drm/amd/display: move stream encoder audio setup to link_hwssWenjing Liu
Unify stream encoder audio setup interface. Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-24drm/amd/display: refactor enable/disable audio stream hw sequenceWenjing Liu
[why] 1. As recommended by hardware team, don't enable APG when stream is not enabled. 2. Move audio stream encoder programming into link_hwss. [how] 1. Merge dp_audio_enable into enable audio stream hw sequence. 2. Move stream encoder programming into link hwss level to unify stream encoder programming interface. Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-24drm/amd/display: Remove FPU guards from the DML folderRodrigo Siqueira
As part of the programming expectation for using DML functions, DC requires that any DML function invoked outside DML uses: DC_FP_START(); ... dml function ... DC_FP_END(); Additionally, all the DML functions that can be invoked outside the DML folder call the function dc_assert_fp_enabled(), which is responsible for triggering a warning in the case that the DML function was not guarded by the DC_FP_START/END. For this reason, call DC_FP_START/END inside DML is wrong, and this commit removes all of those references. Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-24drm/amd/display: Add UHBR135 and UHBR20 into debugfsFangzhi Zuo
Add support to manually force link rate to UHBR135 (0x546) and UHBR20 (0x7d0). Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-24drm/amdgpu: disallow gfxoff until GC IP blocks complete s2idle resumePrike Liang
In the S2idle suspend/resume phase the gfxoff is keeping functional so some IP blocks will be likely to reinitialize at gfxoff entry and that will result in failing to program GC registers.Therefore, let disallow gfxoff until AMDGPU IPs reinitialized completely. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-24drm/amdgpu: skip mes self test for gc 11.0.3 in recoverYuBiao Wang
Temporary disable mes self teset for gc 11.0.3 during gpu_recovery. Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com> Acked-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-24drm/amdkfd: introduce dummy cache info for property asicPrike Liang
This dummy cache info will enable kfd base function support. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-24drm/amdkfd: correct the cache info for gfx1036Jesse Zhang
correct the cache information for gfx1036 Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Jesse Zhang <jesse.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-24drm/amdkfd: update gfx1037 Lx cache settingPrike Liang
Update the gfx1037 L1/L2 cache setting. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-24drm/amd: Add IMU fw version to fw version queriesDavid Francis
IMU is a new firmware for GFX11. There are four means by which firmware version can be queried from the driver: device attributes, vf2pf, debugfs, and the AMDGPU_INFO_FW_VERSION option in the amdgpu info ioctl. Add IMU as an option for those four methods. V2: Added debugfs Reviewed-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: David Francis <David.Francis@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-24drm/amdkfd: use vma_lookup() instead of find_vma()Deming Wang
Using vma_lookup() verifies the start address is contained in the found vma. This results in easier to read the code. Signed-off-by: Deming Wang <wangdeming@inspur.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-24drm/amd/display: make dcn32_mpc_funcs staticruanjinjie
The symbol is not used outside of the file, so mark it static. Fixes the following warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_mpc.c:985:24: warning: symbol 'dcn32_mpc_funcs' was not declared. Should it be static? Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: ruanjinjie <ruanjinjie@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-24drm/amd/display: make dcn32_mmhubbub_funcs staticruanjinjie
The symbol is not used outside of the file, so mark it static. Fixes the following warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_mmhubbub.c:214:28: warning: symbol 'dcn32_mmhubbub_funcs' was not declared. Should it be static? Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: ruanjinjie <ruanjinjie@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-24drm/amd/display: Make some symbols staticruanjinjie
These symbols qp_table_422_10bpc_min, qp_table_444_8bpc_max, qp_table_420_12bpc_max, qp_table_444_10bpc_min, qp_table_420_8bpc_max, qp_table_444_8bpc_min, qp_table_444_12bpc_min, qp_table_420_12bpc_min, qp_table_422_12bpc_min, qp_table_422_12bpc_max, qp_table_444_12bpc_max, qp_table_420_8bpc_min, qp_table_422_8bpc_min, qp_table_422_10bpc_max, qp_table_420_10bpc_max, qp_table_420_10bpc_min, qp_table_444_10bpc_max, qp_table_422_8bpc_max are not used outside of the file, so mark them static. ./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:28:18: warning: symbol 'qp_table_422_10bpc_min' was not declared. Should it be static? ./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:61:18: warning: symbol 'qp_table_444_8bpc_max' was not declared. Should it be static? ./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:102:18: warning: symbol 'qp_table_420_12bpc_max' was not declared. Should it be static? ./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:135:18: warning: symbol 'qp_table_444_10bpc_min' was not declared. Should it be static? ./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:188:18: warning: symbol 'qp_table_420_8bpc_max' was not declared. Should it be static? ./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:209:18: warning: symbol 'qp_table_444_8bpc_min' was not declared. Should it be static? ./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:250:18: warning: symbol 'qp_table_444_12bpc_min' was not declared. Should it be static? ./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:315:18: warning: symbol 'qp_table_420_12bpc_min' was not declared. Should it be static? ./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:348:18: warning: symbol 'qp_table_422_12bpc_min' was not declared. Should it be static? ./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:389:18: warning: symbol 'qp_table_422_12bpc_max' was not declared. Should it be static? ./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:430:18: warning: symbol 'qp_table_444_12bpc_max' was not declared. Should it be static? ./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:495:18: warning: symbol 'qp_table_420_8bpc_min' was not declared. Should it be static? ./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:516:18: warning: symbol 'qp_table_422_8bpc_min' was not declared. Should it be static? ./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:541:18: warning: symbol 'qp_table_422_10bpc_max' was not declared. Should it be static? ./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:574:16: warning: symbol 'qp_table_420_10bpc_max' was not declared. Should it be static? ./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:601:18: warning: symbol 'qp_table_420_10bpc_min' was not declared. Should it be static? ./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:628:18: warning: symbol 'qp_table_444_10bpc_max' was not declared. Should it be static? ./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:681:18: warning: symbol 'qp_table_422_8bpc_max' was not declared. Should it be static? Signed-off-by: ruanjinjie <ruanjinjie@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-24drm/amdgpu: fix sdma doorbell init ordering on APUsAlex Deucher
Commit 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") uncovered a bug in amdgpu that required a reordering of the driver init sequence to avoid accessing a special register on the GPU before it was properly set up leading to an PCI AER error. This reordering uncovered a different hw programming ordering dependency in some APUs where the SDMA doorbells need to be programmed before the GFX doorbells. To fix this, move the SDMA doorbell programming back into the soc15 common code, but use the actual doorbell range values directly rather than the values stored in the ring structure since those will not be initialized at this point. This is a partial revert, but with the doorbell assignment fixed so the proper doorbell index is set before it's used. Fixes: e3163bc8ffdfdb ("drm/amdgpu: move nbio sdma_doorbell_range() into sdma code for vega") Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: skhan@linuxfoundation.org
2022-10-24drm/amd/display: Don't return false if no streamAlvin Lee
pipe_ctx[i] exists even if the pipe is not in use. If the pipe is not in use it will always have a null stream, so don't return false in this case. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-24drm/amd/display: Remove wrong pipe control lockRodrigo Siqueira
When using a device based on DCN32/321, we have an issue where a second 4k@60Hz display does not light up, and the system becomes unresponsive for a few minutes. In the debug process, it was possible to see a hang in the function dcn20_post_unlock_program_front_end in this part: for (j = 0; j < TIMEOUT_FOR_PIPE_ENABLE_MS*1000 && hubp->funcs->hubp_is_flip_pending(hubp); j++) mdelay(1); } The hubp_is_flip_pending always returns positive for waiting pending flips which is a symptom of pipe hang. Additionally, the dmesg log shows this message after a few minutes: BUG: soft lockup - CPU#4 stuck for 26s! ... [ +0.000003] dcn20_post_unlock_program_front_end+0x112/0x340 [amdgpu] [ +0.000171] dc_commit_state_no_check+0x63d/0xbf0 [amdgpu] [ +0.000155] ? dc_validate_global_state+0x358/0x3d0 [amdgpu] [ +0.000154] dc_commit_state+0xe2/0xf0 [amdgpu] This confirmed the hypothesis that we had a pipe hanging somewhere. Next, after checking the ftrace entries, we have the below weird sequence: [..] 2) | dcn10_lock_all_pipes [amdgpu]() { 2) 0.120 us | optc1_is_tg_enabled [amdgpu](); 2) | dcn20_pipe_control_lock [amdgpu]() { 2) | dc_dmub_srv_clear_inbox0_ack [amdgpu]() { 2) 0.121 us | amdgpu_dm_dmub_reg_write [amdgpu](); 2) 0.551 us | } 2) | dc_dmub_srv_send_inbox0_cmd [amdgpu]() { 2) 0.110 us | amdgpu_dm_dmub_reg_write [amdgpu](); 2) 0.511 us | } 2) | dc_dmub_srv_wait_for_inbox0_ack [amdgpu]() { 2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu](); 2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu](); 2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu](); 2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu](); 2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu](); 2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu](); 2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu](); [..] We are not expected to read from dmub register so many times and for so long. From the trace log, it was possible to identify that the function dcn20_pipe_control_lock was triggering the dmub operation when it was unnecessary and causing the hang issue. This commit drops the unnecessary dmub code and, consequently, fixes the second display not lighting up the issue. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-24drm/amd/pm: allow gfxoff on gc_11_0_3Kenneth Feng
allow gfxoff on gc_11_0_3 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-24drm/amd/display: Use update plane and stream routine for DCN32xRodrigo Siqueira
Sub-viewport (Subvp) feature is used for changing MCLK without causing any display artifact, requiring special treatment from the plane and stream perspective since DC needs to read data from the cache when using subvp. However, the function dc_commit_updates_for_stream does not provide all the support needed by this feature which will make this function legacy at some point. For this reason, this commit enables dc_update_planes_and_stream for ASICs that support this feature but preserves the old behavior for other ASICs. However, dc_update_planes_and_stream should replace dc_commit_updates_for_stream for all ASICs since it does most of the tasks executed by dc_commit_updates_for_stream with other extra operations, but we need to run tests before making this change. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-24drm/amd/display: Avoid ABM when ODM combine is enabled for eDPRodrigo Siqueira
ODM to combine on the eDP panel with ABM causes the color difference to the panel since the ABM module only sets one pipe. Hence, this commit blocks ABM in case of ODM combined on eDP. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-24drm/amd/display: Update OTG instance in the commit streamRodrigo Siqueira
OTG instance is not updated in dc_commit_state_no_check for newly committed streams because mode_change is not set. Notice that OTG update is part of the software state, and after hardware programming, it must be updated; for this reason, this commit updates the OTG offset right after hardware programming. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-24drm/amd/display: Handle seamless boot streamRodrigo Siqueira
A seamless boot stream has hardware resources assigned to it, and adding a new stream means rebuilding the current assignment. It is desirable to avoid this situation since it may cause light-up issues on the VGA monitor on USB-C. This commit swaps the seamless boot stream to pipe 0 (if necessary) to ensure that the pipe context matches. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-24drm/amd/display: Add function for validate and update new streamRodrigo Siqueira
DC stream can be seen as a representation of the DCN backend or the data struct that represents the center of the display pipeline. The front end (i.e., planes) is connected to the DC stream, and in its turn, streams are connected to the DC link. Due to this dynamic, DC must handle the following scenarios: 1. A stream is removed; 2. A new stream is created; 3. An unchanged stream had some updates on its planes. These combinations require that the new stream data struct become updated and has a valid global state. For handling multiple corner cases associated with stream operations, this commit introduces a function dedicated to manipulating stream changes and invokes the state validation function after that. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-24drm/amd/display: Handle virtual hardware detectRodrigo Siqueira
If virtual hardware is detected, there is no reason to run the full dc_commit_streams process, and DC can return true immediately. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-24drm/amd/display: Include surface of unaffected streamsRodrigo Siqueira
The commit stream function does not include surfaces of unaffected streams, which may lead to some blank screens during mode change in some edge cases. This commit adds surfaces of unaffected streams followed by kernel-doc for documenting some of the fields that participate in this change. v2: squash in kerneldoc warning fix (Alex) Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-24drm/amd/display: Copy DC context in the commit streamsRodrigo Siqueira
DC adds an instance of DML (which contains VBA) to each context, and multiple threads might write back to the global VBA resulting in data overwriting. To keep the consistency with other parts of the DC code, this commit changes dc_commit_streams to copy the current DC state, and as a result, it also changes the function signature to expect streams instead of a context. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-24drm/amd/display: Enable new commit sequence only for DCN32xRodrigo Siqueira
Change commit sequence will impact all ASICs. It is prudent to run this update in small steps to keep issues under control and avoid any potential regression. With this idea in mind, this commit is preparation work for the complete transition to the new commit sequence. To maintain this change manageable across multiple ASICs, this commit adds a new function named dc_commit_streams which is a copy of the dc_commit_state with some minor changes. Finally, inside the dc_commit_state, we check if we are using DCN32x or above and enable the new sequence only for those devices. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-24drm/amd/display: Rework context change checkRodrigo Siqueira
Context change is all about streams; for this reason, this commit renames context_changed to streams_changed. Additionally, to make this function more flexible, this commit changes the function signature to receive the stream array and the stream count as a parameter. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-24drm/amd/display: Check if link state is validRodrigo Siqueira
The link state is set to false if there is no link and local sink. Even though the stream state may not change, it is desirable to commit the new stream when HPD goes low to high. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-24drm/amdkfd: Fix memory leak in kfd_mem_dmamap_userptr()Rafael Mendonca
If the number of pages from the userptr BO differs from the SG BO then the allocated memory for the SG table doesn't get freed before returning -EINVAL, which may lead to a memory leak in some error paths. Fix this by checking the number of pages before allocating memory for the SG table. Fixes: 264fb4d332f5 ("drm/amdgpu: Add multi-GPU DMA mapping helpers") Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-24drm/amdgpu: Remove ATC L2 access for MMHUB 2.1.xLijo Lazar
MMHUB 2.1.x versions don't have ATCL2. Remove accesses to ATCL2 registers. Since they are non-existing registers, read access will cause a 'Completer Abort' and gets reported when AER is enabled with the below patch. Tagging with the patch so that this is backported along with it. v2: squash in uninitialized warning fix (Nathan Chancellor) Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-10-24drm/i915/gt: use intel_uncore_rmw when appropriateAndrzej Hajda
This patch replaces all occurences of the form intel_uncore_write(reg, intel_uncore_read(reg) OP val) with intel_uncore_rmw. Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221019143818.244339-2-andrzej.hajda@intel.com
2022-10-24drm/i915: use intel_uncore_rmw when appropriateAndrzej Hajda
This patch replaces all occurences of the form intel_uncore_write(reg, intel_uncore_read(reg) OP val) with intel_uncore_rmw. Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221019143818.244339-1-andrzej.hajda@intel.com
2022-10-24Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixesMaarten Lankhorst
Update to v6.1-rc2 to grab more fixes. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2022-10-24drm/i915/dp: Reset frl trained flag before restarting FRL trainingAnkit Nautiyal
For cases where DP has HDMI2.1 sink and FRL Link issues are detected, reset the flag to state FRL trained status before restarting FRL training. Fixes: 9488a030ac91 ("drm/i915: Add support for enabling link status and recovery") Cc: Swati Sharma <swati2.sharma@intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> (v2) Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011063447.904649-2-ankit.k.nautiyal@intel.com (cherry picked from commit 47e1a59e60c688c5f95b67277202f05b7e84c189) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-10-24drm/i915/dgfx: Keep PCI autosuspend control 'on' by default on all dGPUAnshuman Gupta
DGFX platforms has lmem and cpu can access the lmem objects via mmap and i915 internal i915_gem_object_pin_map() for i915 own usages. Both of these methods has pre-requisite requirement to keep GFX PCI endpoint in D0 for a supported iomem transaction over PCI link. (Refer PCIe specs 5.3.1.4.1) Both DG1/DG2 have a known hardware bug that violates the PCIe specs and support the iomem read write transaction over PCIe bus despite endpoint is D3 state. Due to above H/W bug, we had never observed any issue with i915 runtime PM versus lmem access. But this issue becomes visible when PCIe gfx endpoint's upstream bridge enters to D3, at this point any lmem read/write access will be returned as unsupported request. But again this issue is not observed on every platform because it has been observed on few host machines DG1/DG2 endpoint's upstream bridge does not bind with pcieport driver. which really disables the PCIe power savings and leaves the bridge at D0 state. We need a unique interface to read/write from lmem with runtime PM wakeref protection something similar to intel_uncore_{read, write}, keep autosuspend control to 'on' on all discrete platforms, until we have a unique interface to read/write from lmem. This just change the default autosuspend setting of i915 on dGPU, user can still change it to 'auto'. v2: - Modified the commit message and subject with more information. - Changed the Fixes tag to LMEM support commit. [Joonas] - Changed !HAS_LMEM() Cond to !IS_DGFX(). [Rodrigo] Fixes: b908be543e44 ("drm/i915: support creating LMEM objects") Suggested-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221014113258.1284226-1-anshuman.gupta@intel.com (cherry picked from commit 66eb93e71a7a6695b7c5eb682e3ca1c980cf9d58) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-10-24drm/i915: Extend Wa_1607297627 to Alderlake-PJosé Roberto de Souza
Workaround 1607297627 was missed for Alderlake-P, so here extending it to it and adding the fixes tag so this WA is backported to all stable kernels. v2: - fixed subject - added Fixes tag BSpec: 54369 Cc: <stable@vger.kernel.org> # v5.17+ Fixes: dfb924e33927 ("drm/i915/adlp: Remove require_force_probe protection") Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221017132432.112850-1-jose.souza@intel.com (cherry picked from commit 847eec69f01a28ca44f5ac7e1d71d3a60263d680) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-10-24drm/bridge: it6505: Improve synchronization between extcon subsystemPin-yen Lin
Originally, the it6505 relies on a short sleep in the IRQ handler and a long sleep to make sure it6505->lane_swap and it6505->lane_count is configured in it6505_extcon_work and it6505_detect, respectively. Use completion and additional DPCD read to remove the unnecessary waits, and use a different lock for it6505_extcon_work and the threaded IRQ handler because they no longer need to run exclusively. The wait time of the completion is usually less than 10ms in local experiments, but leave it larger here just in case. Signed-off-by: Pin-yen Lin <treapking@chromium.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221013110411.1674359-4-treapking@chromium.org
2022-10-24drm/bridge: it6505: Setup links in it6505_irq_hpdPin-yen Lin
Move the DPCD read and link setup steps to HPD IRQ handler to remove an unnecessary dependency between .detect callback and the HPD IRQ handler before registering it6505 as a DRM bridge. This is safe because there is always a .detect call after each HPD IRQ handler triggered by the drm_helper_hpd_irq_event call. Signed-off-by: Pin-yen Lin <treapking@chromium.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221013110411.1674359-3-treapking@chromium.org
2022-10-24drm/bridge: it6505: Initialize AUX channel in it6505_i2c_probePin-yen Lin
During device boot, the HPD interrupt could be triggered before the DRM subsystem registers it6505 as a DRM bridge. In such cases, the driver tries to access AUX channel and causes NULL pointer dereference. Initializing the AUX channel earlier to prevent such error. Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver") Signed-off-by: Pin-yen Lin <treapking@chromium.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221013110411.1674359-2-treapking@chromium.org
2022-10-24gpu/drm: fix repeated words in commentswangjianli
Delete the redundant word 'the'. Signed-off-by: wangjianli <wangjianli@cdjrlc.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20221022060701.58280-1-wangjianli@cdjrlc.com
2022-10-24gpu/drm: fix repeated words in commentswangjianli
Delete the redundant word 'the'. Signed-off-by: wangjianli <wangjianli@cdjrlc.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20221022060551.56918-1-wangjianli@cdjrlc.com
2022-10-24drm/vc4: Fix spelling mistake "mmaping" -> "mmapping"Colin Ian King
There are a couple of spelling mistakes in DRM_DEBUG messages. Fix them. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20221021084035.65367-1-colin.i.king@gmail.com
2022-10-22drm/i915: Introduce intel_crtc_needs_color_update()Ville Syrjälä
Add a common helper to answer the question "do we need to update color management stuff?". Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221021162442.27283-5-ville.syrjala@linux.intel.com
2022-10-22drm/i915: Don't flag both full modeset and fastset at the same timeVille Syrjälä
Be consistent in whether we flag a full modeset or a fastset for the pipe. intel_modeset_all_pipes() would seem to be the only codepath not getting this right. The other case is when we flag the fastset initially, currently we just clear the mode_changed flag and set the update_pipe flag. But we could still have connectors_changed==true or active_changed==true forcing a full modeset anyway. So check for that after clearing the mode_changed flag. And let's add a WARN to make sure we did get it right. v2: Deal with {connectors,active}_changed Reviewed-by: Jani Nikula <jani.nikula@intel.com> #v1 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221021162442.27283-4-ville.syrjala@linux.intel.com
2022-10-22drm/i915: Remove some local 'mode_changed' boolsVille Syrjälä
These 'mode_changed' booleans aren't very helpful. Just replace them with direct intel_crtc_needs_modeset() calls which is more descriptive. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221021162442.27283-3-ville.syrjala@linux.intel.com
2022-10-22drm/i915: Introduce intel_crtc_needs_fastset()Ville Syrjälä
Replace the somewhat obscure crtc_state.update_pipe checks with a more descriptive thing. Also nicely matches the intel_crtc_needs_modeset() counterpart for full modesets. v2: Handle one more case in the fbc code Reviewed-by: Jani Nikula <jani.nikula@intel.com> #v1 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221021162442.27283-2-ville.syrjala@linux.intel.com
2022-10-22drm/i915: Activate DRRS after state readoutVille Syrjälä
On BDW+ we have just the one set of DP M/N registers. The values we write into said registers depends on whether we want DRRS to be in high or low gear. This causes issues for the state checker which currently has to assume either set of M/N (high or low refresh rate) values may appear there. That sort of works for M/N itself, but all other values derived from the M/N (dotclock, pixel rate) are not handled correctly, leading to potential for state checker mismatches. Let's avoid all those problems by simply keeping DRRS in high gear until the state checker has done its hardware state readout. Note that hitting this issue presumable became very hard after commit 1b333c679a0f ("drm/i915: Do DRRS disable/enable during pre/post_plane_update()") since the state check would have to laze about for one full second (delay used by intel_drrs_schedule_work()) to see the low refresh rate. But it is still theoretically possible. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221020120706.25728-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-10-21nouveau/dmem: Remove duplicated include in nouveau_dmem.cYang Li
./drivers/gpu/drm/nouveau/nouveau_dmem.c: nvif/if000c.h is included more than once. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2404 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221017000723.113744-1-yang.lee@linux.alibaba.com
2022-10-21drm/amdgpu: Adjust MES polling timeout for sriovYiqing Yao
[why] MES response time in sriov may be longer than default value due to reset or init in other VF. A timeout value specific to sriov is needed. [how] When in sriov, adjust the timeout value to calculated worst case scenario. Signed-off-by: Yiqing Yao <yiqing.yao@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-20 16:44:03 +0000