| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit 2b7605d73b97e2fa28e0817242e66ca968d2a7cb
Some displays are not lighting up when put in LTTPR Transparent Mode
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
We're only treating TMDS as a valid target for infoframe updates which
results in PSR being unable to transition from state 4 to state 5.
[How]
Also allow infoframe updates for DCN3.1 - following how we handle
this path for earlier ASIC as well.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Changes in DM needed to support Freesync HDMI on DMUB.
[How]
Change implementation to parse CEA blocks in case of DMUB-enabled ASICs.
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Added NULL checks before two problematic statements
Signed-off-by: Wang <anguwang@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
dmub would notify x86 response time violation by GPINT_DATAOUT
[How]
1. Use GPINT_DATAOUT to trigger x86 interrupt
2. Register GPINT_DATAOUT interrupt handler.
3. Trigger ACR while GPINT_DATAOUT occurred.
Signed-off-by: Chun-Liang Chang <Chun-Liang.Chang@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There is a difference between our default behavior and override
behavior. For default behavior we need to decide link training settings
within specs' limitation and mandates.
For override behavior we do not need to follow all these requirements.
We are isolating override decision to its own function to maintain the
integrity of our specs compliant default behavior.
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In amdgpu_ras_query_error_count() return an error
if the device doesn't support RAS. This prevents
that function from having to always set the values
of the integer pointers (if set), and thus
prevents function side effects--always to have to
set values of integers if integer pointers set,
regardless of whether RAS is supported or
not--with this change this side effect is
mitigated.
Also, if no pointers are set, don't count, since
we've no way of reporting the counts.
Also, give this function a kernel-doc.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Reported-by: Tom Rix <trix@redhat.com>
Fixes: a46751fbcde505 ("drm/amdgpu: Fix RAS function interface")
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
If flr_work takes read_lock, then other threads who takes
read_lock can access hardware when host is doing vf flr.
[How]
flr_work should take write_lock to avoid this case.
Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The I2C IP doesn't support writes or reads of 0 bytes.
In order for a START/STOP transaction to take
place on the bus, the data written/read has to be
at least one byte.
That is, you cannot generate a write with 0 bytes,
just to get the ACK from a device, just so you can
probe that device if it is on the bus and so to
discover all devices on the bus--you'll have to
read at least one byte. Writes of 0 bytes generate
no START/STOP on this I2C IP--the bus is not
engaged at all.
Set the I2C_AQ_NO_ZERO_LEN to the existing I2C
quirk tables for Aldebaran, Arcturus, Navi10 and
Sienna Cichlid, and add a quirk table to the I2C
driver which drives the bus when the SMU
doesn't--for instance on Vega20.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Lijo Lazar <Lijo.Lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add I2C quirk table to Aldebaran.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Lijo Lazar <Lijo.Lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
GPU timing counters are read via KIQ under sriov, which will introduce
a delay.
[How]
It could be directly read by MMIO.
v2: Add additional check to prevent carryover issue.
v3: Only check for carryover for once to prevent performance issue.
v4: Add comments of the rough frequency where carryover happens.
v5: Remove mutex and gfxoff ctrl unused with current timing registers.
Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com>
Acked-by: Horace Chen <horace.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.co>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It is based on reverting two patches back.
drm/amdkfd: Make TLB flush conditional on mapping
drm/amdgpu: Add table_freed parameter to amdgpu_vm_bo_update
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use new helper function amdgpu_vm_set_pasid() to
assign vm pasid value. This also ensures that we don't free
a pasid from vm code as pasids are allocated somewhere else.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Replace idr with xarray as we actually need hash functionality.
Cleanup code related to vm pasid by adding helper function.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
All the proto-context stuff for context creation exists to allow older
userspace drivers to set VMs and engine sets via SET_CONTEXT_PARAM.
Drivers need to update to use CONTEXT_CREATE_EXT_* for this going
forward. Force the issue by blocking the old mechanism on any future
hardware generations.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Carl Zhang <carl.zhang@intel.com>
Cc: Michal Mrozek <michal.mrozek@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-31-jason@jlekstrand.net
|
|
Now that we have the whole engine set and VM at context creation time,
we can just assign those fields instead of creating first and handling
the VM and engines later. This lets us avoid creating useless VMs and
engine sets and lets us get rid of the complex VM setting code.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-30-jason@jlekstrand.net
|
|
We want to delete __assign_ppgtt and, generally, stop setting the VM
after context creation. This is the one place I could find in the
selftests where we set a VM after the fact.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-29-jason@jlekstrand.net
|
|
This better models where we want to go with contexts in general where
things like the VM and engine set are create parameters instead of being
set after the fact.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-28-jason@jlekstrand.net
|
|
When the APIs were added to manage the engine set on a GEM context
directly from userspace, the questionable choice was made to allow
changing the engine set on a context at any time. This is horribly racy
and there's absolutely no reason why any userspace would want to do this
outside of trying to exercise interesting race conditions. By removing
support for CONTEXT_PARAM_ENGINES from ctx_setparam, we make it
impossible to change the engine set after the context has been fully
created.
This doesn't yet let us delete all the deferred engine clean-up code as
that's still used for handling the case where the client dies or calls
GEM_CONTEXT_DESTROY while work is in flight. However, moving to an API
where the engine set is effectively immutable gives us more options to
potentially clean that code up a bit going forward. It also removes a
whole class of ways in which a client can hurt itself or try to get
around kernel context banning.
v2 (Jason Ekstrand):
- Expand the commit mesage
v3 (Jason Ekstrand):
- Make it more obvious that I915_CONTEXT_PARAM_ENGINES returns -EINVAL
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-27-jason@jlekstrand.net
|
|
When the APIs were added to manage VMs more directly from userspace, the
questionable choice was made to allow changing out the VM on a context
at any time. This is horribly racy and there's absolutely no reason why
any userspace would want to do this outside of testing that exact race.
By removing support for CONTEXT_PARAM_VM from ctx_setparam, we make it
impossible to change out the VM after the context has been fully
created. This lets us delete a bunch of deferred task code as well as a
duplicated (and slightly different) copy of the code which programs the
PPGTT registers.
v2 (Jason Ekstrand):
- Expand the commit message
v3 (Daniel Vetter):
- Don't drop the __rcu on the vm pointer
v4 (Jason Ekstrand):
- Make it more obvious that I915_CONTEXT_PARAM_VM returns -EINVAL
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-26-jason@jlekstrand.net
|
|
The current context uAPI allows for two methods of setting context
parameters: SET_CONTEXT_PARAM and CONTEXT_CREATE_EXT_SETPARAM. The
former is allowed to be called at any time while the later happens as
part of GEM_CONTEXT_CREATE. Currently, everything settable via one is
settable via the other. While some params are fairly simple and setting
them on a live context is harmless such as the context priority, others
are far trickier such as the VM or the set of engines. In order to swap
out the VM, for instance, we have to delay until all current in-flight
work is complete, swap in the new VM, and then continue. This leads to
a plethora of potential race conditions we'd really rather avoid.
In previous patches, we added a i915_gem_proto_context struct which is
capable of storing and tracking all such create parameters. This commit
delays the creation of the actual context until after the client is done
configuring it with SET_CONTEXT_PARAM. From the perspective of the
client, it has the same u32 context ID the whole time. From the
perspective of i915, however, it's an i915_gem_proto_context right up
until the point where we attempt to do something which the proto-context
can't handle. Then the real context gets created.
This is accomplished via a little xarray dance. When GEM_CONTEXT_CREATE
is called, we create a proto-context, reserve a slot in context_xa but
leave it NULL, the proto-context in the corresponding slot in
proto_context_xa. Then, whenever we go to look up a context, we first
check context_xa. If it's there, we return the i915_gem_context and
we're done. If it's not, we look in proto_context_xa and, if we find it
there, we create the actual context and kill the proto-context.
In order for this dance to work properly, everything which ever touches
a proto-context is guarded by drm_i915_file_private::proto_context_lock,
including context creation. Yes, this means context creation now takes
a giant global lock but it can't really be helped and that should never
be on any driver's fast-path anyway.
v2 (Daniel Vetter):
- Commit message grammatical fixes.
- Use WARN_ON instead of GEM_BUG_ON
- Rename lazy_create_context_locked to finalize_create_context_locked
- Rework the control-flow logic in the setparam ioctl
- Better documentation all around
v3 (kernel test robot):
- Make finalize_create_context_locked static
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-25-jason@jlekstrand.net
|
|
There's a big comment saying how useful it is but no one is using this
for anything anymore.
It was added in 2bfa996e031b ("drm/i915: Store owning file on the
i915_address_space") and used for debugfs at the time as well as telling
the difference between the global GTT and a PPGTT. In f6e8aa387171
("drm/i915: Report the number of closed vma held by each context in
debugfs") we removed one use of it by switching to a context walk and
comparing with the VM in the context. Finally, VM stats for debugfs
were entirely nuked in db80a1294c23 ("drm/i915/gem: Remove per-client
stats from debugfs/i915_gem_objects")
v2 (Daniel Vetter):
- Delete a struct drm_i915_file_private pre-declaration
- Add a comment to the commit message about history
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-24-jason@jlekstrand.net
|
|
We're about to start doing lazy context creation which means contexts
get created in i915_gem_context_lookup and we may start having more
errors than -ENOENT.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-23-jason@jlekstrand.net
|
|
This means that the proto-context needs to grow support for engine
configuration information as well as setparam logic. Fortunately, we'll
be deleting a lot of setparam logic on the primary context shortly so it
will hopefully balance out.
There's an extra bit of fun here when it comes to setting SSEU and the
way it interacts with PARAM_ENGINES. Unfortunately, thanks to
SET_CONTEXT_PARAM and not being allowed to pick the order in which we
handle certain parameters, we have think about those interactions.
v2 (Daniel Vetter):
- Add a proto_context_free_user_engines helper
- Comment on SSEU in the commit message
- Use proto_context_set_persistence in set_proto_ctx_param
v3 (Daniel Vetter):
- Fix a doc comment
- Do an explicit HAS_FULL_PPGTT check in set_proto_ctx_vm instead of
relying on pc->vm != NULL.
- Handle errors for CONTEXT_PARAM_PERSISTENCE
- Don't allow more resetting user engines
- Rework initialization of UCONTEXT_PERSISTENCE
v4 (Jason Ekstrand):
- Move hand-rolled initialization of UCONTEXT_PERSISTENCE to an
earlier patch
v5 (Jason Ekstrand):
- Move proto_context_set_persistence to this patch
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-22-jason@jlekstrand.net
|
|
What we really want to check is that size of the engines array, i.e.
args->size - sizeof(*user) is divisible by the element size, i.e.
sizeof(*user->engines) because that's what's required for computing the
array length right below the check. However, we're currently not doing
this and instead doing a compile-time check that sizeof(*user) is
divisible by sizeof(*user->engines) and avoiding the subtraction. As
far as I can tell, the only reason for the more confusing pair of checks
is to avoid a single subtraction of a constant.
The other thing the BUILD_BUG_ON might be trying to implicitly check is
that offsetof(user->engines) == sizeof(*user) and we don't have any
weird padding throwing us off. However, that's not the check it's doing
and it's not even a reliable way to do that check.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-21-jason@jlekstrand.net
|
|
This is the VM equivalent of i915_gem_context_lookup. It's only used
once in this patch but future patches will need to duplicate this lookup
code so it's better to have it in a helper.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-20-jason@jlekstrand.net
|
|
For now this is a no-op because everyone passes in a null SSEU but it
lets us get some of the error handling and selftest refactoring plumbed
through.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-19-jason@jlekstrand.net
|
|
Since free_engines works for partially constructed engine sets, we can
use the usual goto pattern.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-18-jason@jlekstrand.net
|
|
The current context uAPI allows for two methods of setting context
parameters: SET_CONTEXT_PARAM and CONTEXT_CREATE_EXT_SETPARAM. The
former is allowed to be called at any time while the later happens as
part of GEM_CONTEXT_CREATE. Currently, everything settable via one is
settable via the other. While some params are fairly simple and setting
them on a live context is harmless such the context priority, others are
far trickier such as the VM or the set of engines. In order to swap out
the VM, for instance, we have to delay until all current in-flight work
is complete, swap in the new VM, and then continue. This leads to a
plethora of potential race conditions we'd really rather avoid.
Unfortunately, both methods of setting the VM and the engine set are in
active use today so we can't simply disallow setting the VM or engine
set vial SET_CONTEXT_PARAM. In order to work around this wart, this
commit adds a proto-context struct which contains all the context create
parameters.
v2 (Daniel Vetter):
- Better commit message
- Use __set/clear_bit instead of set/clear_bit because there's no race
and we don't need the atomics
v3 (Daniel Vetter):
- Use manual bitops and BIT() instead of __set_bit
v4 (Daniel Vetter):
- Add a changelog to the commit message
- Better hyperlinking in docs
- Create the default PPGTT in i915_gem_create_context
v5 (Daniel Vetter):
- Hand-roll the initialization of UCONTEXT_PERSISTENCE
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-17-jason@jlekstrand.net
|
|
In order to prevent kernel doc warnings, also fill out docs for any
missing fields and fix those that forgot the "@".
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-16-jason@jlekstrand.net
|
|
With the proto-context stuff added later in this series, we end up
having to duplicate set_priority. This lets us avoid duplicating the
validation logic.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-15-jason@jlekstrand.net
|
|
As far as I can tell, the only real reason for this is to avoid taking a
reference to the i915_gem_context. The cost of those two atomics
probably pales in comparison to the cost of the ioctl itself so we're
really not buying ourselves anything here. We're about to make context
lookup a tiny bit more complicated, so let's get rid of the one hand-
rolled case.
Some usermode drivers such as our Vulkan driver call GET_RESET_STATS on
every execbuf so the perf here could theoretically be an issue. If this
ever does become a performance issue for any such userspace drivers,
they can use set CONTEXT_PARAM_RECOVERABLE to false and look for -EIO
coming from execbuf to check for hangs instead.
v2 (Daniel Vetter):
- Add a comment in the commit message about recoverable contexts
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-14-jason@jlekstrand.net
|
|
There's no sense in allowing userspace to create more engines than it
can possibly access via execbuf.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-13-jason@jlekstrand.net
|
|
This was only ever used for FENCE_SUBMIT automatic engine selection
which was removed in the previous commit.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-12-jason@jlekstrand.net
|
|
Even though FENCE_SUBMIT is only documented to wait until the request in
the in-fence starts instead of waiting until it completes, it has a bit
more magic than that. If FENCE_SUBMIT is used to submit something to a
balanced engine, we would wait to assign engines until the primary
request was ready to start and then attempt to assign it to a different
engine than the primary. There is an IGT test (the bonded-slice subtest
of gem_exec_balancer) which exercises this by submitting a primary batch
to a specific VCS and then using FENCE_SUBMIT to submit a secondary
which can run on any VCS and have i915 figure out which VCS to run it on
such that they can run in parallel.
However, this functionality has never been used in the real world. The
media driver (the only user of FENCE_SUBMIT) always picks exactly two
physical engines to bond and never asks us to pick which to use.
v2 (Daniel Vetter):
- Mention the exact IGT test this breaks
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-11-jason@jlekstrand.net
|
|
This adds a bunch of complexity which the media driver has never
actually used. The media driver does technically bond a balanced engine
to another engine but the balanced engine only has one engine in the
sibling set. This doesn't actually result in a virtual engine.
This functionality was originally added to handle cases where we may
have more than two video engines and media might want to load-balance
their bonded submits by, for instance, submitting to a balanced vcs0-1
as the primary and then vcs2-3 as the secondary. However, no such
hardware has shipped thus far and, if we ever want to enable such
use-cases in the future, we'll use the up-and-coming parallel submit API
which targets GuC submission.
This makes I915_CONTEXT_ENGINES_EXT_BOND a total no-op. We leave the
validation code in place in case we ever decide we want to do something
interesting with the bonding information.
v2 (Jason Ekstrand):
- Don't delete quite as much code.
v3 (Tvrtko Ursulin):
- Add some history to the commit message
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-10-jason@jlekstrand.net
|
|
This has never been used by any userspace except IGT and provides no
real functionality beyond parroting back parameters userspace passed in
as part of context creation or via setparam. If the context is in
legacy mode (where you use I915_EXEC_RENDER and friends), it returns
success with zero data so it's not useful for discovering what engines
are in the context. It's also not a replacement for the recently
removed I915_CONTEXT_CLONE_ENGINES because it doesn't return any of the
balancing or bonding information.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-9-jason@jlekstrand.net
|
|
This API is entirely unnecessary and I'd love to get rid of it. If
userspace wants a single timeline across multiple contexts, they can
either use implicit synchronization or a syncobj, both of which existed
at the time this feature landed. The justification given at the time
was that it would help GL drivers which are inherently single-timeline.
However, neither of our GL drivers actually wanted the feature. i965
was already in maintenance mode at the time and iris uses syncobj for
everything.
Unfortunately, as much as I'd love to get rid of it, it is used by the
media driver so we can't do that. We can, however, do the next-best
thing which is to embed a syncobj in the context and do exactly what
we'd expect from userspace internally. This isn't an entirely identical
implementation because it's no longer atomic if userspace races with
itself by calling execbuffer2 twice simultaneously from different
threads. It won't crash in that case; it just doesn't guarantee any
ordering between those two submits. It also means that sync files
exported from different engines on a SINGLE_TIMELINE context will have
different fence contexts. This is visible to userspace if it looks at
the obj_name field of sync_fence_info.
Moving SINGLE_TIMELINE to a syncobj emulation has a couple of technical
advantages beyond mere annoyance. One is that intel_timeline is no
longer an api-visible object and can remain entirely an implementation
detail. This may be advantageous as we make scheduler changes going
forward. Second is that, together with deleting the CLONE_CONTEXT API,
we should now have a 1:1 mapping between intel_context and
intel_timeline which may help us reduce locking.
v2 (Tvrtko Ursulin):
- Update the comment on i915_gem_context::syncobj to mention that it's
an emulation and the possible race if userspace calls execbuffer2
twice on the same context concurrently.
v2 (Jason Ekstrand):
- Wrap the checks for eb.gem_context->syncobj in unlikely()
- Drop the dma_fence reference
- Improved commit message
v3 (Jason Ekstrand):
- Move the dma_fence_put() to before the error exit
v4 (Tvrtko Ursulin):
- Add a comment about fence contexts to the commit message
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-8-jason@jlekstrand.net
|
|
This API allows one context to grab bits out of another context upon
creation. It can be used as a short-cut for setparam(getparam()) for
things like I915_CONTEXT_PARAM_VM. However, it's never been used by any
real userspace. It's used by a few IGT tests and that's it. Since it
doesn't add any real value (most of the stuff you can CLONE you can copy
in other ways), drop it.
There is one thing that this API allows you to clone which you cannot
clone via getparam/setparam: timelines. However, timelines are an
implementation detail of i915 and not really something that needs to be
exposed to userspace. Also, sharing timelines between contexts isn't
obviously useful and supporting it has the potential to complicate i915
internally. It also doesn't add any functionality that the client can't
get in other ways. If a client really wants a shared timeline, they can
use a syncobj and set it as an in and out fence on every submit.
v2 (Jason Ekstrand):
- More detailed commit message
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-7-jason@jlekstrand.net
|
|
None of the callbacks we use with it return an error code anymore; they
all return 0 unconditionally.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-6-jason@jlekstrand.net
|
|
Instead of handling it like a context param, unconditionally set it when
intel_contexts are created. For years we've had the idea of a watchdog
uAPI floating about. The aim was for media, so that they could set very
tight deadlines for their transcodes jobs, so that if you have a corrupt
bitstream (especially for decoding) you don't hang your desktop too
hard. But it's been stuck in limbo since forever, and this simplifies
things a bit in preparation for the proto-context work. If we decide to
actually make said uAPI a reality, we can do it through the proto-
context easily enough.
This does mean that we move from reading the request_timeout_ms param
once per engine when engines are created instead of once at context
creation. If someone changes request_timeout_ms between creating a
context and setting engines, it will mean that they get the new timeout.
If someone races setting request_timeout_ms and context creation, they
can theoretically end up with different timeouts. However, since both
of these are fairly harmless and require changing kernel params, we
don't care.
v2 (Tvrtko Ursulin):
- Add a comment about races with request_timeout_ms
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-5-jason@jlekstrand.net
|
|
The idea behind this param is to support OpenCL drivers with relocations
because OpenCL reserves 0x0 for NULL and, if we placed memory there, it
would confuse CL kernels. It was originally sent out as part of a patch
series including libdrm [1] and Beignet [2] support. However, the
libdrm and Beignet patches never landed in their respective upstream
projects so this API has never been used. It's never been used in Mesa
or any other driver, either.
Dropping this API allows us to delete a small bit of code.
[1]: https://lists.freedesktop.org/archives/intel-gfx/2015-May/067030.html
[2]: https://lists.freedesktop.org/archives/intel-gfx/2015-May/067031.html
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-4-jason@jlekstrand.net
|
|
Previously, we were storing the ring size in the ring pointer before it
was actually allocated. We would then guard setting the ring size on
checking for CONTEXT_ALLOC_BIT. This is error-prone at best and really
only saves us a few bytes on something that already burns at least 4K.
Instead, this patch adds a new ring_size field and makes everything use
that.
v2 (Daniel Vetter):
- Replace 512 * SZ_4K with SZ_2M
v2 (Jason Ekstrand):
- Rebase on top of page migration code
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-3-jason@jlekstrand.net
|
|
This reverts commit 88be76cdafc7 ("drm/i915: Allow userspace to specify
ringsize on construction"). This API was originally added for OpenCL
but the compute-runtime PR has sat open for a year without action so we
can still pull it out if we want. I argue we should drop it for three
reasons:
1. If the compute-runtime PR has sat open for a year, this clearly
isn't that important.
2. It's a very leaky API. Ring size is an implementation detail of the
current execlist scheduler and really only makes sense there. It
can't apply to the older ring-buffer scheduler on pre-execlist
hardware because that's shared across all contexts and it won't
apply to the GuC scheduler that's in the pipeline.
3. Having userspace set a ring size in bytes is a bad solution to the
problem of having too small a ring. There is no way that userspace
has the information to know how to properly set the ring size so
it's just going to detect the feature and always set it to the
maximum of 512K. This is what the compute-runtime PR does. The
scheduler in i915, on the other hand, does have the information to
make an informed choice. It could detect if the ring size is a
problem and grow it itself. Or, if that's too hard, we could just
increase the default size from 16K to 32K or even 64K instead of
relying on userspace to do it.
Let's drop this API for now and, if someone decides they really care
about solving this problem, they can do it properly.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-2-jason@jlekstrand.net
|
|
Add ADL-P to the list of supported GuC and HuC firmware versions. For
HuC, it reuses the existing TGL firmware file. For GuC, there is a
dedicated firmware release.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210626004522.1699509-3-John.C.Harrison@Intel.com
|
|
A new HuC is available for TGL and compatible platforms, so switch to
using it.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210626004522.1699509-2-John.C.Harrison@Intel.com
|
|
The 'has_cdclk_crawl' field in our device info structure is a boolean
flag and doesn't need a whole u8. Add it as another 1-bit feature flag
and move it to the display section. While we're at it, replace the
has_cdclk_crawl() function with a macro for consistency with our
handling of other feature flags.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707234206.2002849-1-matthew.d.roper@intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Drivers also need to to sync to the exclusive fence when
a shared one is present.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210702111642.17259-4-christian.koenig@amd.com
|
|
Provide a way for userspace to choose synchronous flushing/pageflips.
This helps save CPU and power.
It is also useful for test scripts since userspace can know when a flush
has happended and wait before doing the next visual test.
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Peter Stuge <peter@stuge.se>
Link: https://patchwork.freedesktop.org/patch/msgid/20210703141321.35494-2-noralf@tronnes.org
|
