| Age | Commit message (Collapse) | Author |
|---|
|
[WHY]
If a system has a privacy screen advertised by a driver it should
be included in the DRM connector for the eDP panel.
[HOW]
Detect statically declared privacy screens when creating eDP connector
and attach privacy screen DRM properties.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY & HOW]
Setup initial changes required to program another set of watermarks
for a 2nd stutter mode. The 2nd stutter mode will be lower power but
have higher enter/exit latencies.
PMFW to choose which stutter mode to use based on stutter efficiences
to see if original stutter (LP1) or low power stutter (LP2) will result
in better power savings.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
DC LSDMA functions had to remember to extract 1 from several fields
to be compliant with DMUB LSDMA commands interface.
Now this logic is moved to DMUB.
[HOW]
Moved extraction by 1 in several fields of LSDMA commands to DMUB.
Changed DC to not do it.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Rafal Ostrowski <rostrows@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHAT]
Removing unused code
Reviewed-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Clay King <clayking@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
The first two loops of for_each_oldnew_connector_in_state() both operate
on an HDCP queue. If one isn't setup then each connector is iterated but
skipped TWICE. This is wasteful for the majority of cases.
[HOW]
Combine the two HDCP related loops of for_each_oldnew_connector_in_state()
and check for the HDCP workqueue before even running either of them. This
should avoid running the functions in most cases, and if HDCP is setup only
run once.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
Conflict for enum type in DPP source files.
[HOW]
Refactor DPP source files to resolve the enum conflicts.
Reviewed-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Lohita Mudimela <lohita.mudimela@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHAT]
Add support for LSDMA Linear Sub Window Copy command.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Rafal Ostrowski <rostrows@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If PAGE_SIZE != XE_PAGE_SIZE (which is currently locked behind
CONFIG_BROKEN), this would generate the wrong number of PDEs.
Since these PDEs are consumed by the GPU, the GPU page size needs to be
used.
Signed-off-by: Simon Richter <Simon.Richter@hogyros.de>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250818064806.2835-1-Simon.Richter@hogyros.de
|
|
Change the resource cleanup order to align with reverse allocation order.
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Christoph Manszewski <christoph.manszewski@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250813101231.196632-3-christoph.manszewski@intel.com
|
|
If the argument check during an array bind fails, the bind_ops are freed
twice as seen below. Fix this by setting bind_ops to NULL after freeing.
==================================================================
BUG: KASAN: double-free in xe_vm_bind_ioctl+0x1b2/0x21f0 [xe]
Free of addr ffff88813bb9b800 by task xe_vm/14198
CPU: 5 UID: 0 PID: 14198 Comm: xe_vm Not tainted 6.16.0-xe-eudebug-cmanszew+ #520 PREEMPT(full)
Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR5 RVP, BIOS ADLPFWI1.R00.2411.A02.2110081023 10/08/2021
Call Trace:
<TASK>
dump_stack_lvl+0x82/0xd0
print_report+0xcb/0x610
? __virt_addr_valid+0x19a/0x300
? xe_vm_bind_ioctl+0x1b2/0x21f0 [xe]
kasan_report_invalid_free+0xc8/0xf0
? xe_vm_bind_ioctl+0x1b2/0x21f0 [xe]
? xe_vm_bind_ioctl+0x1b2/0x21f0 [xe]
check_slab_allocation+0x102/0x130
kfree+0x10d/0x440
? should_fail_ex+0x57/0x2f0
? xe_vm_bind_ioctl+0x1b2/0x21f0 [xe]
xe_vm_bind_ioctl+0x1b2/0x21f0 [xe]
? __pfx_xe_vm_bind_ioctl+0x10/0x10 [xe]
? __lock_acquire+0xab9/0x27f0
? lock_acquire+0x165/0x300
? drm_dev_enter+0x53/0xe0 [drm]
? find_held_lock+0x2b/0x80
? drm_dev_exit+0x30/0x50 [drm]
? drm_ioctl_kernel+0x128/0x1c0 [drm]
drm_ioctl_kernel+0x128/0x1c0 [drm]
? __pfx_xe_vm_bind_ioctl+0x10/0x10 [xe]
? find_held_lock+0x2b/0x80
? __pfx_drm_ioctl_kernel+0x10/0x10 [drm]
? should_fail_ex+0x57/0x2f0
? __pfx_xe_vm_bind_ioctl+0x10/0x10 [xe]
drm_ioctl+0x352/0x620 [drm]
? __pfx_drm_ioctl+0x10/0x10 [drm]
? __pfx_rpm_resume+0x10/0x10
? do_raw_spin_lock+0x11a/0x1b0
? find_held_lock+0x2b/0x80
? __pm_runtime_resume+0x61/0xc0
? rcu_is_watching+0x20/0x50
? trace_irq_enable.constprop.0+0xac/0xe0
xe_drm_ioctl+0x91/0xc0 [xe]
__x64_sys_ioctl+0xb2/0x100
? rcu_is_watching+0x20/0x50
do_syscall_64+0x68/0x2e0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fa9acb24ded
Fixes: b43e864af0d4 ("drm/xe/uapi: Add DRM_XE_VM_BIND_FLAG_CPU_ADDR_MIRROR")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Christoph Manszewski <christoph.manszewski@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250813101231.196632-2-christoph.manszewski@intel.com
|
|
When a VM is marked as an usuable we disallow new submissions from it,
however submissions that where already scheduled on the ring would still
be re-sent.
Since this can lead to further hangs, avoid emitting the actual IBs.
Fixes: 6a4d287a1ae6 ("drm/msm: Mark VM as unusable on GPU hangs")
Signed-off-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/668314/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
|
|
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d2469 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/667895/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
|
|
The BIOS can leave the AUX power well enabled on an output, even if this
isn't required (on platforms where the AUX power is only needed for an
AUX access). This was observed at least on PTL. To avoid the WARN which
would be triggered by this during the HW readout, convert the WARN to a
debug message.
Cc: stable@vger.kernel.org # v6.8+
Reported-by: Charlton Lin <charlton.lin@intel.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250811080152.906216-6-imre.deak@intel.com
(cherry picked from commit 6cb52cba474b2bec1a3018d3dbf75292059a29a1)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
|
|
Use the cached max lane count value on LNL+, to account for scenarios
where this value is queried after the HW cleared the corresponding pin
assignment value in the TCSS_DDI_STATUS register after the sink got
disconnected.
For consistency, follow-up changes will use the cached max lane count
value on other platforms as well and will also cache the pin assignment
value in a similar way.
Cc: stable@vger.kernel.org # v6.8+
Reported-by: Charlton Lin <charlton.lin@intel.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250811080152.906216-5-imre.deak@intel.com
(cherry picked from commit afc4e84388079f4d5ba05271632b7a4d8d85165c)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
|
|
On LNL+ for a disconnected sink the pin assignment value gets cleared by
the HW/FW as soon as the sink gets disconnected, even if the PHY
ownership got acquired already by the BIOS/driver (and hence the PHY
itself is still connected and used by the display). During HW readout
this can result in detecting the PHY's max lane count as 0 - matching
the above cleared aka NONE pin assignment HW state. For a connected PHY
the driver in general (outside of intel_tc.c) expects the max lane count
value to be valid for the video mode enabled on the corresponding output
(1, 2 or 4). Ensure this by setting the max lane count to 4 in this
case. Note, that it doesn't matter if this lane count happened to be
more than the max lane count with which the PHY got connected and
enabled, since the only thing the driver can do with such an output -
where the DP-alt sink is disconnected - is to disable the output.
v2: Rebased on change reading out the pin configuration only if the PHY
is connected.
Cc: stable@vger.kernel.org # v6.8+
Reported-by: Charlton Lin <charlton.lin@intel.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250811080152.906216-4-imre.deak@intel.com
(cherry picked from commit 33cf70bc0fe760224f892bc1854a33665f27d482)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
|
|
The PHY's pin assignment value in the TCSS_DDI_STATUS register - as set
by the HW/FW based on the connected DP-alt sink's TypeC/PD pin
assignment negotiation - gets cleared by the HW/FW on LNL+ as soon as
the sink gets disconnected, even if the PHY ownership got acquired
already by the driver (and hence the PHY itself is still connected and
used by the display). This is similar to how the PHY Ready flag gets
cleared on LNL+ in the same register.
To be able to query the max lane count value on LNL+ - which is based on
the above pin assignment - at all times even after the sink gets
disconnected, the max lane count must be determined and cached during
the PHY's HW readout and connect sequences. Do that here, leaving the
actual use of the cached value to a follow-up change.
v2: Don't read out the pin configuration if the PHY is disconnected.
Cc: stable@vger.kernel.org # v6.8+
Reported-by: Charlton Lin <charlton.lin@intel.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250811080152.906216-3-imre.deak@intel.com
(cherry picked from commit 3e32438fc406761f81b1928d210b3d2a5e7501a0)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
|
|
The TypeC PHY HW readout during driver loading and system resume
determines which TypeC mode the PHY is in (legacy/DP-alt/TBT-alt) and
whether the PHY is connected, based on the PHY's Owned and Ready flags.
For the PHY to be in DP-alt or legacy mode and for the PHY to be in the
connected state in these modes, both the Owned (set by the BIOS/driver)
and the Ready (set by the HW) flags should be set.
On ICL-MTL the HW kept the PHY's Ready flag set after the driver
connected the PHY by acquiring the PHY ownership (by setting the Owned
flag), until the driver disconnected the PHY by releasing the PHY
ownership (by clearing the Owned flag). On LNL+ this has changed, in
that the HW clears the Ready flag as soon as the sink gets disconnected,
even if the PHY ownership was acquired already and hence the PHY is
being used by the display.
When inheriting the HW state from BIOS for a PHY connected in DP-alt
mode on which the sink got disconnected - i.e. in a case where the sink
was connected while BIOS/GOP was running and so the sink got enabled
connecting the PHY, but the user disconnected the sink by the time the
driver loaded - the PHY Owned but not Ready state must be accounted for
on LNL+ according to the above. Do that by assuming on LNL+ that the PHY
is connected in DP-alt mode whenever the PHY Owned flag is set,
regardless of the PHY Ready flag.
This fixes a problem on LNL+, where the PHY TypeC mode / connected state
was detected incorrectly for a DP-alt sink, which got connected and then
disconnected by the user in the above way.
v2: Rename tc_phy_in_legacy_or_dp_alt_mode() to tc_phy_owned_by_display().
(Luca, Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org # v6.8+
Reported-by: Charlton Lin <charlton.lin@intel.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
[Imre: Add one-liner function documentation for tc_phy_owned_by_display()]
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250811080152.906216-2-imre.deak@intel.com
(cherry picked from commit 89f4b196ee4b056e0e8c179b247b29d4a71a4e7e)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
|
|
VFs without native PCIe Power Management (PM) capabilities inherit their
PF's power state as per PCIe specifications(§5.10.1 PCIe Base Spec 7.0).
Enabling Runtime Power Management (RPM) for these VFs trigger unnecessary
driver suspend/resume operations that ultimately perform no PCI-level power
transition.
Since VFs without PM capabilities cannot independently enter low-power
states, the existing RPM workflow becomes redundant:
1. Driver executes full suspend/resume sequence
2. PCI PM transition step becomes no-op
3. VF power state remains tied to PF's status
Disabling RPM for VFs eliminates this redundant processing while
maintaining proper power management through PF dependency. This
optimization ensures VFs follow their PF's power state without superfluous
runtime handling.
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Maarten Lankhorst <dev@lankhorst.se>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250812163613.9954-1-satyanarayana.k.v.p@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
In preparation of wider usecases which require checking for I2C
controller presence, introduce xe_i2c_present() helper.
v2: Doc fix (Riana)
Suggested-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Link: https://lore.kernel.org/r/20250814091845.1356135-1-raag.jadav@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
If VGA and DP connected together, there will be only one can get crtc.
Add encoder possible_clones to support two connectors enable.
Fixes: 3c7623fb5bb6 ("drm/hisilicon/hibmc: Enable this hot plug detect of irq feature")
Signed-off-by: Baihan Li <libaihan@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250813094238.3722345-8-shiyongbang@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
In some case, the dp link training success at 8.1Gbps, but the sink's
maximum supported rate is less than 8.1G. So change the default 8.1Gbps
link rate to the rate that reads from devices' capabilities.
Fixes: 54063d86e036 ("drm/hisilicon/hibmc: add dp link moduel in hibmc drivers")
Signed-off-by: Baihan Li <libaihan@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250813094238.3722345-6-shiyongbang@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
When hibmc loaded failed, the driver use hibmc_unload to free the
resource, but the mutexes in mode.config are not init, which will
access an NULL pointer. Just change goto statement to return, because
hibnc_hw_init() doesn't need to free anything.
Fixes: b3df5e65cc03 ("drm/hibmc: Drop drm_vblank_cleanup")
Signed-off-by: Baihan Li <libaihan@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250813094238.3722345-5-shiyongbang@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
The local variable is passed in request_irq (), and there will be use
after free problem, which will make request_irq failed. Using the global
irq name instead of it to fix.
Fixes: b11bc1ae4658 ("drm/hisilicon/hibmc: Add MSI irq getting and requesting for HPD")
Signed-off-by: Baihan Li <libaihan@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250813094238.3722345-4-shiyongbang@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Currently the driver missed to clean the i2c adapter when vdac init failed.
It may cause resource leak.
Fixes: a0d078d06e516 ("drm/hisilicon: Features to support reading resolutions from EDID")
Signed-off-by: Baihan Li <libaihan@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250813094238.3722345-2-shiyongbang@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Using device_find_child() and of_find_device_by_node() to locate
devices could cause an imbalance in the device's reference count.
device_find_child() and of_find_device_by_node() both call
get_device() to increment the reference count of the found device
before returning the pointer. In mtk_drm_get_all_drm_priv(), these
references are never released through put_device(), resulting in
permanent reference count increments. Additionally, the
for_each_child_of_node() iterator fails to release node references in
all code paths. This leaks device node references when loop
termination occurs before reaching MAX_CRTC. These reference count
leaks may prevent device/node resources from being properly released
during driver unbind operations.
As comment of device_find_child() says, 'NOTE: you will need to drop
the reference with put_device() after use'.
Cc: stable@vger.kernel.org
Fixes: 1ef7ed48356c ("drm/mediatek: Modify mediatek-drm for mt8195 multi mmsys support")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250812071932.471730-1-make24@iscas.ac.cn/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
In 32-bit arm, the build fails with:
error[E0308]: mismatched types
--> drivers/gpu/drm/nova/file.rs:42:28
|
42 | getparam.set_value(value);
| --------- ^^^^^ expected `u64`, found `u32`
| |
| arguments to this method are incorrect
|
note: method defined here
--> drivers/gpu/drm/nova/uapi.rs:29:12
|
29 | pub fn set_value(&self, v: u64) {
| ^^^^^^^^^ ------
help: you can convert a `u32` to a `u64`
|
42 | getparam.set_value(value.into());
| +++++++
The reason is that `Getparam::set_value` takes a `u64` (from the UAPI),
but `pci::Device::resource_len()` returns a `resource_size_t`, which is a
`phys_addr_t`, which may be 32- or 64-bit.
Thus add an `into()` call to support the 32-bit case, while allowing the
Clippy lint that complains in the 64-bit case where the type is the same.
Fixes: cdeaeb9dd762 ("drm: nova-drm: add initial driver skeleton")
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Christian Schrefl <chrisi.schrefl@gmail.com>
Link: https://lore.kernel.org/r/20250724165441.2105632-1-ojeda@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Add formatting directive line in function `drm_gpuvm_sm_map_exec_lock()`
comment to clear warning messages shown bellow that appears generating
documentation `make htmldocs`.
Warning: ./drivers/gpu/drm/drm_gpuvm.c:2444: Unexpected indentation.
Warning: ./drivers/gpu/drm/drm_gpuvm.c:2446: Block quote ends without a blank line; unexpected unindent.
Warning: ./drivers/gpu/drm/drm_gpuvm.c:2450: Definition list ends without a blank line; unexpected unindent.
Warning: ./drivers/gpu/drm/drm_gpuvm.c:2451: Definition list ends without a blank line; unexpected unindent.
Warning: ./drivers/gpu/drm/drm_gpuvm.c:2455: Unexpected indentation.
Warning: ./drivers/gpu/drm/drm_gpuvm.c:2456: Definition list ends without a blank line; unexpected unindent.
Warning: ./drivers/gpu/drm/drm_gpuvm.c:2457: Definition list ends without a blank line; unexpected unindent.
Warning: ./drivers/gpu/drm/drm_gpuvm.c:2458: Definition list ends without a blank line; unexpected unindent.
Fixes: 471920ce25d5 ("drm/gpuvm: Add locking helpers")
Signed-off-by: Javier Garcia <rampxxxx@gmail.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250810150706.305040-1-rampxxxx@gmail.com
[ Fix typo in commit message. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Replace kfree() with kvfree() for memory allocated by kvmalloc().
Compile-tested only.
Cc: stable@vger.kernel.org
Fixes: 8a8b1ec5261f ("drm/nouveau/gsp: split rpc handling out on its own")
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Acked-by: Zhi Wang <zhiw@nvidia.com>
Link: https://lore.kernel.org/r/20250813125412.96178-1-rongqianfeng@vivo.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
When a poison is consumed on the guest before the guest receives the host's poison creation msg, a corner case may occur to have poison_handler complete processing earlier than it should to cause the guest to hang waiting for the req_bad_pages reply during a VF FLR, resulting in the VM becoming inaccessible in stress tests.
To fix this issue, this patch refactored the mailbox sequence by seperating the bad_page_work into two parts req_bad_pages_work and handle_bad_pages_work.
Old sequence:
1.Stop data exchange work
2.Guest sends MB_REQ_RAS_BAD_PAGES to host and keep polling for IDH_RAS_BAD_PAGES_READY
3.If the IDH_RAS_BAD_PAGES_READY arrives within timeout limit, re-init the data exchange region for updated bad page info
else timeout with error message
New sequence:
req_bad_pages_work:
1.Stop data exhange work
2.Guest sends MB_REQ_RAS_BAD_PAGES to host
Once Guest receives IDH_RAS_BAD_PAGES_READY event
handle_bad_pages_work:
3.re-init the data exchange region for updated bad page info
Signed-off-by: Chenglei Xie <Chenglei.Xie@amd.com>
Reviewed-by: Shravan Kumar Gande <Shravankumar.Gande@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The duplicate judgment of wptr_va could be removed to simplify the logic
Signed-off-by: Qiang Liu <liuqiang@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The function dc_stream_set_cursor_attributes() currently dereferences
the `stream` pointer and nested members `stream->ctx->dc->current_state`
without checking for NULL.
All callers of these functions, such as in
`dcn30_apply_idle_power_optimizations()` and
`amdgpu_dm_plane_handle_cursor_update()`, already perform NULL checks
before calling these functions.
Fixes below:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c:336 dc_stream_program_cursor_attributes()
error: we previously assumed 'stream' could be null (see line 334)
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c
327 bool dc_stream_program_cursor_attributes(
328 struct dc_stream_state *stream,
329 const struct dc_cursor_attributes *attributes)
330 {
331 struct dc *dc;
332 bool reset_idle_optimizations = false;
333
334 dc = stream ? stream->ctx->dc : NULL;
^^^^^^
The old code assumed stream could be NULL.
335
--> 336 if (dc_stream_set_cursor_attributes(stream, attributes)) {
^^^^^^
The refactor added an unchecked dereference.
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c
313 bool dc_stream_set_cursor_attributes(
314 struct dc_stream_state *stream,
315 const struct dc_cursor_attributes *attributes)
316 {
317 bool result = false;
318
319 if (dc_stream_check_cursor_attributes(stream, stream->ctx->dc->current_state, attributes)) {
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Here.
This function used to check for if stream as NULL and return false at
the start. Probably we should add that back.
Fixes: 4465dd0e41e8 ("drm/amd/display: Refactor SubVP cursor limiting logic")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Alvin Lee <alvin.lee2@amd.com>
Cc: Ray Wu <ray.wu@amd.com>
Cc: Dillon Varone <dillon.varone@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Daniel Wheeler <daniel.wheeler@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Wenjing Liu <wenjing.liu@amd.com>
Cc: Jun Lei <Jun.Lei@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Dillon Varone <Dillon.varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Various small typos found around.
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Take into account the limits from the vbios. Ported
from the SMU13 code.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4352
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Free the resources allocated if smu_v13_0_12_tables_init fails.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Fixes: 5bf93e1d6efd ("drm/amd/pm: Add caching to SMUv13.0.12 temp metric")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This change reorganizes VCN reset capability detection by:
1. Moving reset mask configuration from sw_init to new late_init phase
2. Adding vcn_v4_0_3_late_init() to properly check for per-queue reset support
3. Only setting soft full reset mask as fallback when per-queue reset isn't supported
4. Removing TODO comment now that queue reset support is implemented
V2: Removed unrelated changes. Keep amdgpu_get_soft_full_reset_mask in place
and remove TODO comment. (Alex)
v3: set the flags at one place (all in late_init) (Lijo)
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ruili Ji <ruiliji2@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
HMM assumes that pages have READ permissions by default. Inside
svm_range_validate_and_map, we add READ permissions then add WRITE
permissions if the VMA isn't read-only. This will conflict with regions
that only have PROT_WRITE or have PROT_NONE. When that happens,
svm_range_restore_work will continue to retry, silently, giving the
impression of a hang if pr_debug isn't enabled to show the retries..
If pages don't have READ permissions, simply unmap them and continue. If
they weren't mapped in the first place, this would be a no-op. Since x86
doesn't support write-only, and PROT_NONE doesn't allow reads or writes
anyways, this will allow the svm range validation to continue without
getting stuck in a loop forever on mappings we can't use with HMM.
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This commit implements VCN reset capability for SMU v13.0.6 with the following changes:
1. Added new PPSMC message ID (0x5B) for VCN reset in SMU firmware interface
2. Extended SMU capabilities to include VCN_RESET support
3. Implemented VCN reset support check:
- Added smu_v13_0_6_reset_vcn_is_supported() function
4. Updated SMU v13.0.6 PPT functions to include VCN reset operations
v2: clean up debug info (Alex)
v3: remove unsupported message and split smu v13.0.6 changes to a separate patch (Lijo)
v4: simply the function (smu_v13_0_6_reset_vcn_is_supported) (Lijo)
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ruili Ji <ruiliji2@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This change introduces infrastructure to check whether VCN reset
is supported by the SMU firmware. Key changes include:
1. Added new functions to query VCN reset support:
- amdgpu_dpm_reset_vcn_is_supported()
- smu_reset_vcn_is_supported()
- pptable_funcs.reset_vcn_is_supported callback
2. Implemented proper locking in the DPM layer with mutex protection
3. Maintained consistency with existing SDMA reset support checks
The new capability allows callers to check for VCN reset support
before attempting the operation, preventing unnecessary attempts
on unsupported platforms.
v2: clean up debug info(Alex)
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ruili Ji <ruiliji2@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If a amdgpu_bo_va is fpriv->prt_va, the bo of this one is always NULL.
So, such kind of amdgpu_bo_va should be updated separately before
amdgpu_vm_handle_moved.
Signed-off-by: Heng Zhou <Heng.Zhou@amd.com>
Reviewed-by: Kasiviswanathan, Harish <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Currently each kfd compute partition/node is sharing
the same uuid of AID, which doen't meet the CUDA spec
for visible device, so corresponding XCD id for each
partition in smu has been assigned to xcp, and exposed
to kfd topology.
v2: add NULL check (Lijo)
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Replace "out == 0" with "!out" for pointer comparison to improve code
readability and conform to coding style.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove unnecessary semicolons.
Fixes: dda4fb85e433 ("drm/amd/display: DML changes for DCN32/321")
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The clamp() macro explicitly expresses the intent of constraining
a value within bounds.Therefore, replacing min(max(a, b), c) and
max(min(a,b),c) with clamp(val, lo, hi) can improve code readability.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Detecting the monitor for DisplayPort targets is more complicated than
just reading the HPD pin level: it requires reading the DPCD in order to
check what kind of device is attached to the port and whether there is
an actual display attached.
In order to let DRM framework handle such configurations, disable
DRM_BRIDGE_OP_DETECT for dp-connector devices, letting the actual DP
driver perform detection. This still keeps DRM_BRIDGE_OP_HPD enabled, so
it is valid for the bridge to report HPD events.
Currently inside the kernel there are only two targets which list
hpd-gpios for dp-connector devices: arm64/qcom/qcs6490-rb3gen2 and
arm64/qcom/sa8295p-adp. Both should be fine with this change.
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konradybcio@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250802-dp-conn-no-detect-v1-1-2748c2b946da@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250704075411.3218059-1-sakari.ailus@linux.intel.com
|
|
intel_bo.c doesn't need intel_display_types.h for anything. Remove.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20250814132445.1573035-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
This patch adds firmware binary and GPU model naming support for
Mali-Gx20 and Mali-Gx25 GPUs.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250807162633.3666310-8-karunika.choo@arm.com
|
|
As the FLUSH_MEM and FLUSH_PT MMU_AS commands are deprecated in GPUs
from Mali-Gx20 onwards, this patch adds support for performing cache
maintenance via the FLUSH_CACHES command in GPU_COMMAND in place of
FLUSH_MEM and FLUSH_PT commands.
Mali-Gx10 and Mali-Gx15 GPUs also has support for the FLUSH_CACHES
command and will also use this by default going forward.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250807162633.3666310-7-karunika.choo@arm.com
|
|
In certain scenarios, it is possible for multiple cache flushes to be
requested before the previous one completes. This patch introduces the
cache_flush_lock mutex to serialize these operations and ensure that
any requested cache flushes are completed instead of dropped.
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Co-developed-by: Dennis Tsiang <dennis.tsiang@arm.com>
Signed-off-by: Dennis Tsiang <dennis.tsiang@arm.com>
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250807162633.3666310-6-karunika.choo@arm.com
|
|
Mali-Gx15 introduces a new GPU_FEATURES register that provides
information about GPU-wide supported features. The register value will
be passed on to userspace via gpu_info.
Additionally, Mali-Gx15 presents an 'Immortalis' naming variant
depending on the shader core count and presence of Ray Intersection
feature support.
This patch adds:
- support for correctly identifying the model names for Mali-Gx15 GPUs.
- arch 11.8 FW binary support
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250807162633.3666310-5-karunika.choo@arm.com
|
