summaryrefslogtreecommitdiff
path: root/drivers/hid
AgeCommit message (Collapse)Author
2019-10-03HID: Fix assumption that devices have inputsAlan Stern
The syzbot fuzzer found a slab-out-of-bounds write bug in the hid-gaff driver. The problem is caused by the driver's assumption that the device must have an input report. While this will be true for all normal HID input devices, a suitably malicious device can violate the assumption. The same assumption is present in over a dozen other HID drivers. This patch fixes them by checking that the list of hid_inputs for the hid_device is nonempty before allowing it to be used. Reported-and-tested-by: syzbot+403741a091bf41d4ae79@syzkaller.appspotmail.com Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-10-03HID: lg-g15: Add support for the G510's M1-M3 and MR LEDsHans de Goede
Add support for controlling the LEDs below the M1-M3 and MR keys on the G510. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-10-03HID: lg-g15: Add support for controlling the G510's RGB backlightHans de Goede
Note that the keyboard has a backlight on/off toggle button. If the backlight is turned off through that button, then any changes we make will be ignored and we cannot turn it back on again from the host. To workaround this we write the last set RGB values when we receive an event indicating that the backlight has been turned on again. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-10-03HID: lg-g15: Add support for the G510 keyboards' gaming keysHans de Goede
Add support for the gaming and LCD menu keys on the G510 keyboard. Note this commit does not add support for the keyboard and LCD backlight and the status LEDs, this is done in a follow up commit. Note the G510 generates 4 different input reports on its second (Consumer Keys) interface: -input report 1 is standard bootclass keyboard input report, mirroring normal keyboard interface -input report 2 is consumer page keys -input report 3 is gkeys, etc. -input report 4 is LED status, single byte, bits: bit 2: kbd and LCD backlight is *off* when set, toggled by the light key bit 3: headphone mute LED bit 4: mic mute LED Input-report 1 we ignore since this is a duplicate report from the first interface, report 2 is handled by the regular hid-input code. In this commit we add handling for input report 3. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-10-03HID: lg-g15: Add support for the M1-M3 and MR LEDsHans de Goede
Add support for controlling the LEDs below the M1-M3 and MR keys. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-10-03HID: lg-g15: Add keyboard and LCD backlight controlHans de Goede
Register a led_classdev for the keyboard backlight and another one for the LCD backlight. This commit also includes LED_BRIGHT_HW_CHANGED support, which together with a desktop-environment which supports this, such as GNOME3 leads to the kbd-backlight OSD being show with the new level when changing the backlight setting through the hotkey on the keyboard. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-10-03HID: Add driver for Logitech gaming keyboards (G15, G15 v2)Hans de Goede
Add a driver to stop the extra "G" keys from sending F1 - F12 instead making them send KEY_GKEY# and also make the non-functional M1 - M3 and MR keys and the non-functional buttons below the LCD panel properly generated key events. Note the connect_mask and gkeys_settings_output_report variables may seem unnecessary since they are always set to the same value, these are there in preparation of adding support for the G, M and LCD keys on the G510 kbd. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-10-01HID: hyperv: Use in-place iterator API in the channel callbackDexuan Cui
Simplify the ring buffer handling with the in-place API. Also avoid the dynamic allocation and the memory leak in the channel callback function. Signed-off-by: Dexuan Cui <decui@microsoft.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-01HID: hidraw: replace printk() with corresponding pr_xx() variantRishi Gupta
This commit replaces direct invocations of printk with their appropriate pr_info/warn() variant. Signed-off-by: Rishi Gupta <gupt21@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-10-01HID: prodikeys: make array keys static const, makes object smallerColin Ian King
Don't populate the array keys on the stack but instead make it static const. Makes the object code smaller by 166 bytes. Before: text data bss dec hex filename 18931 5872 480 25283 62c3 drivers/hid/hid-prodikeys.o After: text data bss dec hex filename 18669 5968 480 25117 621d drivers/hid/hid-prodikeys.o (gcc version 9.2.1, amd64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-10-01HID: fix error message in hid_open_report()Michał Mirosław
On HID report descriptor parsing error the code displays bogus pointer instead of error offset (subtracts start=NULL from end). Make the message more useful by displaying correct error offset and include total buffer size for reference. This was carried over from ancient times - "Fixed" commit just promoted the message from DEBUG to ERROR. Cc: stable@vger.kernel.org Fixes: 8c3d52fc393b ("HID: make parser more verbose about parsing errors by default") Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-10-01HID: google: whiskers: signal tablet mode on connectDmitry Torokhov
When we receive "keyboard position" event from Whiskers we can conclude that the base is attached, even if we did not get EC event for that. We may miss EC event because there are some units which have a lot of leakage on the ADC pins that the EC uses to determine whether or not a base is attached. Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-10-01HID: google: whiskers: signal tablet mode switch on disconnectDmitry Torokhov
Currently, the tablet mode switch that takes two signals as its input: base attached switch from the EC and some GMR signal from whiskers when it's folded over. This tablet mode switch is then sent to Chrome, which changes the UI. However, there are some units which have a lot of leakage on the ADC pins that the EC uses to determine whether or not a base is attached. This can result in the base being physically detached, but the EC thinking that it's still attached. The user would then be stuck in laptop mode and wouldn't be able to rotate their display. To work around this let's send "tablet mode" signal when we remove HID interface, which normally happens when we physically disconnect whiskers. Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-10-01HID: google: whiskers: more robust tablet mode detectionDmitry Torokhov
The USB interface may get detected before the platform/EC one, so let's note the state of the base (if we receive event) and use it to correctly initialize the tablet mode switch state. Also let's start the HID interface immediately when probing, this will ensure that we correctly process "base folded" events that may be sent as we initialize the base. Note that this requires us to add a remove() function where we stop and close the hardware and switch the LED registration away from devm interface as we need to make sure that we destroy the LED instance before we stop the hardware. Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-09-24Merge tag 'hyperv-next-signed' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull Hyper-V updates from Sasha Levin: - first round of vmbus hibernation support (Dexuan Cui) - remove dependencies on PAGE_SIZE (Maya Nakamura) - move the hyper-v tools/ code into the tools build system (Andy Shevchenko) - hyper-v balloon cleanups (Dexuan Cui) * tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: Drivers: hv: vmbus: Resume after fixing up old primary channels Drivers: hv: vmbus: Suspend after cleaning up hv_sock and sub channels Drivers: hv: vmbus: Clean up hv_sock channels by force upon suspend Drivers: hv: vmbus: Suspend/resume the vmbus itself for hibernation Drivers: hv: vmbus: Ignore the offers when resuming from hibernation Drivers: hv: vmbus: Implement suspend/resume for VSC drivers for hibernation Drivers: hv: vmbus: Add a helper function is_sub_channel() Drivers: hv: vmbus: Suspend/resume the synic for hibernation Drivers: hv: vmbus: Break out synic enable and disable operations HID: hv: Remove dependencies on PAGE_SIZE for ring buffer Tools: hv: move to tools buildsystem hv_balloon: Reorganize the probe function hv_balloon: Use a static page for the balloon_up send buffer
2019-09-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Jiri Kosina: - syzbot memory corruption fixes for hidraw, Prodikeys, Logitech and Sony drivers from Alan Stern and Roderick Colenbrander - stuck 'fn' key fix for hid-apple from Joao Moreno - proper propagation of EPOLLOUT from hiddev and hidraw, from Fabian Henneke - fixes for handling power management for intel-ish devices with NO_D3 flag set, from Zhang Lixu - extension of supported usage range for customer page, as some Logitech devices are actually making use of it. From Olivier Gay. - hid-multitouch is no longer filtering mice node creation, from Benjamin Tissoires - MobileStudio Pro 13 support, from Ping Cheng - a few other device ID additions and assorted smaller fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (27 commits) HID: core: fix dmesg flooding if report field larger than 32bit HID: core: Add printk_once variants to hid_warn() etc HID: core: reformat and reduce hid_printk macros HID: prodikeys: Fix general protection fault during probe HID: wacom: add new MobileStudio Pro 13 support HID: sony: Fix memory corruption issue on cleanup. HID: i2c-hid: modify quirks for weida's devices HID: apple: Fix stuck function keys when using FN HID: sb0540: add support for Creative SB0540 IR receivers HID: Add quirk for HP X500 PIXART OEM mouse HID: logitech-dj: Fix crash when initial logi_dj_recv_query_paired_devices fails hid-logitech-dj: add the new Lightspeed receiver HID: logitech-dj: add support of the G700(s) receiver HID: multitouch: add support for the Smart Tech panel HID: multitouch: do not filter mice nodes HID: do not call hid_set_drvdata(hdev, NULL) in drivers HID: wacom: do not call hid_set_drvdata(hdev, NULL) HID: logitech: Fix general protection fault caused by Logitech driver HID: hidraw: Fix invalid read in hidraw_ioctl HID: wacom: support named keys on older devices ...
2019-09-22Merge branch 'for-5.4/wacom' into for-linusJiri Kosina
- MobileStudio Pro 13 support, from Ping Cheng - a few other assorted fixes Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-09-22Merge branch 'for-5.4/sb0540' into for-linusJiri Kosina
- support for Creative SB0540 IR receivers, from Bastien Nocera Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-09-22Merge branch 'for-5.4/multitouch' into for-linusJiri Kosina
- support for the Smart Tech panel, from Benjamin Tissoires - hid-multitouch is no longer filtering mice node creation, from Benjamin Tissoires Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-09-22Merge branch 'for-5.4/logitech' into for-linusJiri Kosina
- extension of supported usage range for customer page, as some Logitech devices are actually making use of it. From Olivier Gay. - support for Lightspeed and G700(s) receivers from Filipe Laíns and Benjamin Tissoires Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-09-22Merge branch 'for-5.4/ish' into for-linusJiri Kosina
- fixes for handling power management for intel-ish devices with NO_D3 flag set, from Zhang Lixu Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-09-22Merge branch 'for-5.4/hidraw-hiddev-epoll' into for-linusJiri Kosina
- proper propagation of EPOLLOUT from hiddev and hidraw, from Fabian Henneke Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-09-22Merge branch 'for-5.4/core' into for-linusJiri Kosina
- fixes for formatting / ratelimiting kernel log by HID core, from Joshua Clayton Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-09-22Merge branch 'for-5.4/cleanup' into for-linusJiri Kosina
- cleanup of ->drvdata handling between HID core and drivers, from Benjamin Tissoires Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-09-22Merge branch 'for-5.4/apple' into for-linusJiri Kosina
- stuck 'fn' key fix for hid-apple from Joao Moreno Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-09-19Merge tag 'tag-chrome-platform-for-v5.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Benson Leung: "CrOS EC / MFD Migration: - Move cros_ec core driver from mfd into chrome platform. Wilco EC: - Add batt_ppid_info command to Wilco telemetry driver. CrOS EC: - cros_ec_rpmsg : Add support to inform EC of suspend/resume status - cros_ec_rpmsg : Fix race condition on probe failed - cros_ec_chardev : Add a poll handler to receive MKBP events Misc: - bugfixes in cros_usbpd_logger and cros_ec_ishtp" * tag 'tag-chrome-platform-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: cros_usbpd_logger: null check create_singlethread_workqueue platform/chrome: cros_ec_chardev: Add a poll handler to receive MKBP events platform/chrome: cros_ec_rpmsg: Fix race with host command when probe failed platform/chrome: chromeos_tbmc: Report wake events mfd: cros_ec: Use mfd_add_hotplug_devices() helper mfd: cros_ec: Add convenience struct to define autodetectable CrOS EC subdevices mfd: cros_ec: Add convenience struct to define dedicated CrOS EC MCUs mfd: cros_ec: Use kzalloc and cros_ec_cmd_xfer_status helper mfd / platform: cros_ec: Reorganize platform and mfd includes mfd / platform: cros_ec: Rename config to a better name mfd: cros_ec: Switch to use the new cros-ec-chardev driver mfd / platform: cros_ec: Miscellaneous character device to talk with the EC mfd / platform: cros_ec: Move cros-ec core driver out from MFD mfd / platform: cros_ec: Handle chained ECs as platform devices platform/chrome: cros_ec_rpmsg: Add host command AP sleep state support platform/chrome: chromeos_laptop: drop checks of NULL-safe functions platform/chrome: wilco_ec: Add batt_ppid_info command to telemetry driver
2019-09-18HID: core: fix dmesg flooding if report field larger than 32bitJoshua Clayton
Only warn once of oversize hid report value field On HP spectre x360 convertible the message: hid-sensor-hub 001F:8087:0AC2.0002: hid_field_extract() called with n (192) > 32! (kworker/1:2) is continually printed many times per second, crowding out all else. Protect dmesg by printing the warning only one time. The size of the hid report field data structure should probably be increased. The data structure is treated as a u32 in Linux, but an unlimited number of bits in the USB hid spec, so there is some rearchitecture needed now that devices are sending more than 32 bits. Signed-off-by: Joshua Clayton <stillcompiling@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-09-06Bluetooth: hidp: Fix assumptions on the return value of hidp_send_messageDan Elkouby
hidp_send_message was changed to return non-zero values on success, which some other bits did not expect. This caused spurious errors to be propagated through the stack, breaking some drivers, such as hid-sony for the Dualshock 4 in Bluetooth mode. As pointed out by Dan Carpenter, hid-microsoft directly relied on that assumption as well. Fixes: 48d9cc9d85dd ("Bluetooth: hidp: Let hidp_send_message return number of queued bytes") Signed-off-by: Dan Elkouby <streetwalkermc@gmail.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-09-05HID: prodikeys: Fix general protection fault during probeAlan Stern
The syzbot fuzzer provoked a general protection fault in the hid-prodikeys driver: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.3.0-rc5+ #28 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event RIP: 0010:pcmidi_submit_output_report drivers/hid/hid-prodikeys.c:300 [inline] RIP: 0010:pcmidi_set_operational drivers/hid/hid-prodikeys.c:558 [inline] RIP: 0010:pcmidi_snd_initialise drivers/hid/hid-prodikeys.c:686 [inline] RIP: 0010:pk_probe+0xb51/0xfd0 drivers/hid/hid-prodikeys.c:836 Code: 0f 85 50 04 00 00 48 8b 04 24 4c 89 7d 10 48 8b 58 08 e8 b2 53 e4 fc 48 8b 54 24 20 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 13 04 00 00 48 ba 00 00 00 00 00 fc ff df 49 8b The problem is caused by the fact that pcmidi_get_output_report() will return an error if the HID device doesn't provide the right sort of output report, but pcmidi_set_operational() doesn't bother to check the return code and assumes the function call always succeeds. This patch adds the missing check and aborts the probe operation if necessary. Reported-and-tested-by: syzbot+1088533649dafa1c9004@syzkaller.appspotmail.com Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-09-05HID: wacom: add new MobileStudio Pro 13 supportPing Cheng
wacom_wac_pad_event is the only routine we need to update. Signed-off-by: Ping Cheng <ping.cheng@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-09-05HID: sony: Fix memory corruption issue on cleanup.Roderick Colenbrander
The sony driver is not properly cleaning up from potential failures in sony_input_configured. Currently it calls hid_hw_stop, while hid_connect is still running. This is not a good idea, instead hid_hw_stop should be moved to sony_probe. Similar changes were recently made to Logitech drivers, which were also doing improper cleanup. Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com> CC: stable@vger.kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-09-04HID: i2c-hid: modify quirks for weida's devicesHungNien Chen
This 'SET_PWR_WAKEUP_DEV' quirk only works for weida's devices with pid 0xC300 & 0xC301. Some weida's devices with other pids also need this quirk now. Use 'HID_ANY_ID' instead of 0xC300 to make all of weida's devices can be fixed on the power on issue. This modification should be safe since devices without power on issue will send the power on command only once. Signed-off-by: HungNien Chen <hn.chen@weidahitech.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-09-04HID: apple: Fix stuck function keys when using FNJoao Moreno
This fixes an issue in which key down events for function keys would be repeatedly emitted even after the user has raised the physical key. For example, the driver fails to emit the F5 key up event when going through the following steps: - fnmode=1: hold FN, hold F5, release FN, release F5 - fnmode=2: hold F5, hold FN, release F5, release FN The repeated F5 key down events can be easily verified using xev. Signed-off-by: Joao Moreno <mail@joaomoreno.com> Co-developed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-09-03HID: sb0540: add support for Creative SB0540 IR receiversBastien Nocera
Add a new hid driver for the Creative SB0540 IR receiver. This receiver is usually coupled with an RM-1500 or an RM-1800 remote control. The scrollwheels on the RM-1800 remote are not bound, as they are labelled for specific audio controls that don't usually exist on most systems. They can be remapped using standard Linux keyboard remapping tools. Signed-off-by: Bastien Nocera <bnocera@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-09-03HID: Add quirk for HP X500 PIXART OEM mouseSebastian Parschauer
The PixArt OEM mice are known for disconnecting every minute in runlevel 1 or 3 if they are not always polled. So add quirk ALWAYS_POLL for this one as well. Ville Viinikka (viinikv) reported and tested the quirk. Link: https://github.com/sriemer/fix-linux-mouse issue 15 Signed-off-by: Sebastian Parschauer <s.parschauer@gmx.de> CC: stable@vger.kernel.org # v4.16+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-09-02HID: hv: Remove dependencies on PAGE_SIZE for ring bufferMaya Nakamura
Define the ring buffer size as a constant expression because it should not depend on the guest page size. Signed-off-by: Maya Nakamura <m.maya.nakamura@gmail.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-09-02mfd / platform: cros_ec: Reorganize platform and mfd includesEnric Balletbo i Serra
There is a bit of mess between cros-ec mfd includes and platform includes. For example, we have a linux/mfd/cros_ec.h include that exports the interface implemented in platform/chrome/cros_ec_proto.c. Or we have a linux/mfd/cros_ec_commands.h file that is non related to the multifunction device (in the sense that is not exporting any function of the mfd device). This causes crossed includes between mfd and platform/chrome subsystems and makes the code difficult to read, apart from creating 'curious' situations where a platform/chrome driver includes a linux/mfd/cros_ec.h file just to get the exported functions that are implemented in another platform/chrome driver. In order to have a better separation on what the cros-ec multifunction driver does and what the cros-ec core provides move and rework the affected includes doing: - Move cros_ec_commands.h to include/linux/platform_data/cros_ec_commands.h - Get rid of the parts that are implemented in the platform/chrome/cros_ec_proto.c driver from include/linux/mfd/cros_ec.h to a new file include/linux/platform_data/cros_ec_proto.h - Update all the drivers with the new includes, so - Drivers that only need to know about the protocol include - linux/platform_data/cros_ec_proto.h - linux/platform_data/cros_ec_commands.h - Drivers that need to know about the cros-ec mfd device also include - linux/mfd/cros_ec.h Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Tested-by: Gwendal Grignou <gwendal@chromium.org> Series changes: 3 - Fix dereferencing pointer to incomplete type 'struct cros_ec_dev' (lkp) Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-09-02mfd / platform: cros_ec: Move cros-ec core driver out from MFDEnric Balletbo i Serra
Now, the ChromeOS EC core driver has nothing related to an MFD device, so move that driver from the MFD subsystem to the platform/chrome subsystem. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Tested-by: Gwendal Grignou <gwendal@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-08-26HID: logitech-dj: Fix crash when initial logi_dj_recv_query_paired_devices failsHans de Goede
Before this commit dj_probe would exit with an error if the initial logi_dj_recv_query_paired_devices fails. The initial call may fail when the receiver is connected through a kvm and the focus is away. When the call fails this causes 2 problems: 1) dj_probe calls logi_dj_recv_query_paired_devices after calling hid_device_io_start() so a HID report may have been received in between and our delayedwork_callback may be running. It seems that the initial logi_dj_recv_query_paired_devices failure happening with some KVMs triggers this exact scenario, causing the work-queue to run on free-ed memory, leading to: BUG: unable to handle page fault for address: 0000000000001e88 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 3 PID: 257 Comm: kworker/3:3 Tainted: G OE 5.3.0-rc5+ #100 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./B150M Pro4S/D3, BIOS P7.10 12/06/2016 Workqueue: events 0xffffffffc02ba200 RIP: 0010:0xffffffffc02ba1bd Code: e8 e8 13 00 d8 48 89 c5 48 85 c0 74 4c 48 8b 7b 10 48 89 ea b9 07 00 00 00 41 b9 09 00 00 00 41 b8 01 00 00 00 be 10 00 00 00 <48> 8b 87 88 1e 00 00 48 8b 40 40 e8 b3 6b b4 d8 48 89 ef 41 89 c4 RSP: 0018:ffffb760c046bdb8 EFLAGS: 00010286 RAX: ffff935038ea4550 RBX: ffff935046778000 RCX: 0000000000000007 RDX: ffff935038ea4550 RSI: 0000000000000010 RDI: 0000000000000000 RBP: ffff935038ea4550 R08: 0000000000000001 R09: 0000000000000009 R10: 000000000000e011 R11: 0000000000000001 R12: ffff9350467780e8 R13: ffff935046778000 R14: 0000000000000000 R15: ffff935046778070 FS: 0000000000000000(0000) GS:ffff935054e00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000001e88 CR3: 000000075a612002 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: 0xffffffffc02ba2f7 ? process_one_work+0x1b1/0x560 process_one_work+0x234/0x560 worker_thread+0x50/0x3b0 kthread+0x10a/0x140 ? process_one_work+0x560/0x560 ? kthread_park+0x80/0x80 ret_from_fork+0x3a/0x50 Modules linked in: vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) bnep vfat fat btusb btrtl btbcm btintel bluetooth intel_rapl_msr ecdh_generic rfkill ecc snd_usb_audio snd_usbmidi_lib intel_rapl_common snd_rawmidi mc x86_pkg_temp_thermal intel_powerclamp coretemp iTCO_wdt iTCO_vendor_support mei_wdt mei_hdcp ppdev kvm_intel kvm irqbypass crct10dif_pclmul crc32_generic crc32_pclmul snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio ghash_clmulni_intel intel_cstate snd_hda_intel snd_hda_codec intel_uncore snd_hda_core snd_hwdep intel_rapl_perf snd_seq snd_seq_device snd_pcm snd_timer intel_wmi_thunderbolt snd e1000e soundcore mxm_wmi i2c_i801 bfq mei_me mei intel_pch_thermal parport_pc parport acpi_pad binfmt_misc hid_lg_g15(E) hid_logitech_dj(E) i915 crc32c_intel i2c_algo_bit drm_kms_helper nvme nvme_core drm wmi video uas usb_storage i2c_dev CR2: 0000000000001e88 ---[ end trace 1d3f8afdcfcbd842 ]--- 2) Even if we were to fix 1. by making sure the work is stopped before failing probe, failing probe is the wrong thing to do, we have logi_dj_recv_queue_unknown_work to deal with the initial logi_dj_recv_query_paired_devices failure. Rather then error-ing out of the probe, causing the receiver to not work at all we should rely on this, so that the attached devices will get properly enumerated once the KVM focus is switched back. Cc: stable@vger.kernel.org Fixes: 74808f9115ce ("HID: logitech-dj: add support for non unifying receivers") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-08-23hid-logitech-dj: add the new Lightspeed receiverFilipe Laíns
This patchs adds the new Lightspeed receiver. Currently it seems to only be used in the G305. Signed-off-by: Filipe Laíns <lains@archlinux.org> [bentiss: rebased on top of master] Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-08-23HID: logitech-dj: add support of the G700(s) receiverBenjamin Tissoires
Both the G700 and the G700s are sharing the same receiver. Include support for this receiver in hid-logitech-dj so that userspace can differentiate both. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2019-08-23Merge branch 'master' into for-5.4/logitechBenjamin Tissoires
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-08-22HID: multitouch: add support for the Smart Tech panelBenjamin Tissoires
This panel is not very friendly to us: it exposes multiple multitouch collections, some of them being of logical application stylus. Usually, a device has only one report per application, and that is what I assumed in commit 8dfe14b3b47f ("HID: multitouch: ditch mt_report_id") To avoid breaking all working device, add a new class and a new quirk for that situation. Reported-and-tested-by: Matthias Fend <Matthias.Fend@wolfvision.net> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-08-22HID: multitouch: do not filter mice nodesBenjamin Tissoires
It was a good idea at the time to not create a mouse node for the multitouch touchscreens, but: - touchscreens following the Win 8 protocol should not have this disturbing mouse node anymore, or if they have, it should be used for something else (like a joystick attached to the screen) - touchpads have it, and they should not use it unless there is a bug, but when the laptop has a trackstick, the data are reported through this mouse node. So instead of whitelisting all of the devices that have a need for the mouse node, just export it. hid-input.c will append a suffix to it ('Mouse'), so users will eventually see if something goes wrong. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-08-22HID: do not call hid_set_drvdata(hdev, NULL) in driversBenjamin Tissoires
This is a common pattern in the HID drivers to reset the drvdata. Some do it properly, some do it only in case of failure. But, this is actually already handled by driver core, so there is no need to do it manually. [for hid-sensor-hub.c] Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [For hid-picolcd_core.c] Acked-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-08-22HID: wacom: do not call hid_set_drvdata(hdev, NULL)Benjamin Tissoires
This is a common pattern in the HID drivers to reset the drvdata. However, this is actually already handled by driver core, so there is no need to do it manually. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Jason Gerecke <jason.gerecke@wacom.com>
2019-08-22HID: logitech: Fix general protection fault caused by Logitech driverAlan Stern
The syzbot fuzzer found a general protection fault in the HID subsystem: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN CPU: 0 PID: 3715 Comm: syz-executor.3 Not tainted 5.2.0-rc6+ #15 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__pm_runtime_resume+0x49/0x180 drivers/base/power/runtime.c:1069 Code: ed 74 d5 fe 45 85 ed 0f 85 9a 00 00 00 e8 6f 73 d5 fe 48 8d bd c1 02 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 48 89 fa 83 e2 07 38 d0 7f 08 84 c0 0f 85 fe 00 00 00 RSP: 0018:ffff8881d99d78e0 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000020 RCX: ffffc90003f3f000 RDX: 0000000416d8686d RSI: ffffffff82676841 RDI: 00000020b6c3436a RBP: 00000020b6c340a9 R08: ffff8881c6d64800 R09: fffffbfff0e84c25 R10: ffff8881d99d7940 R11: ffffffff87426127 R12: 0000000000000004 R13: 0000000000000000 R14: ffff8881d9b94000 R15: ffffffff897f9048 FS: 00007f047f542700(0000) GS:ffff8881db200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b30f21000 CR3: 00000001ca032000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: pm_runtime_get_sync include/linux/pm_runtime.h:226 [inline] usb_autopm_get_interface+0x1b/0x50 drivers/usb/core/driver.c:1707 usbhid_power+0x7c/0xe0 drivers/hid/usbhid/hid-core.c:1234 hid_hw_power include/linux/hid.h:1038 [inline] hidraw_open+0x20d/0x740 drivers/hid/hidraw.c:282 chrdev_open+0x219/0x5c0 fs/char_dev.c:413 do_dentry_open+0x497/0x1040 fs/open.c:778 do_last fs/namei.c:3416 [inline] path_openat+0x1430/0x3ff0 fs/namei.c:3533 do_filp_open+0x1a1/0x280 fs/namei.c:3563 do_sys_open+0x3c0/0x580 fs/open.c:1070 do_syscall_64+0xb7/0x560 arch/x86/entry/common.c:301 entry_SYSCALL_64_after_hwframe+0x49/0xbe It turns out the fault was caused by a bug in the HID Logitech driver, which violates the requirement that every pathway calling hid_hw_start() must also call hid_hw_stop(). This patch fixes the bug by making sure the requirement is met. Reported-and-tested-by: syzbot+3cbe5cd105d2ad56a1df@syzkaller.appspotmail.com Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-08-22HID: hidraw: Fix invalid read in hidraw_ioctlAlan Stern
The syzbot fuzzer has reported a pair of problems in the hidraw_ioctl() function: slab-out-of-bounds read and use-after-free read. An example of the first: BUG: KASAN: slab-out-of-bounds in strlen+0x79/0x90 lib/string.c:525 Read of size 1 at addr ffff8881c8035f38 by task syz-executor.4/2833 CPU: 1 PID: 2833 Comm: syz-executor.4 Not tainted 5.3.0-rc2+ #1 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xca/0x13e lib/dump_stack.c:113 print_address_description+0x6a/0x32c mm/kasan/report.c:351 __kasan_report.cold+0x1a/0x33 mm/kasan/report.c:482 kasan_report+0xe/0x12 mm/kasan/common.c:612 strlen+0x79/0x90 lib/string.c:525 strlen include/linux/string.h:281 [inline] hidraw_ioctl+0x245/0xae0 drivers/hid/hidraw.c:446 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0xd2d/0x1330 fs/ioctl.c:696 ksys_ioctl+0x9b/0xc0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x6f/0xb0 fs/ioctl.c:718 do_syscall_64+0xb7/0x580 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x459829 Code: fd b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f7a68f6dc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000459829 RDX: 0000000000000000 RSI: 0000000080404805 RDI: 0000000000000004 RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f7a68f6e6d4 R13: 00000000004c21de R14: 00000000004d5620 R15: 00000000ffffffff The two problems have the same cause: hidraw_ioctl() fails to test whether the device has been removed. This patch adds the missing test. Reported-and-tested-by: syzbot+5a6c4ec678a0c6ee84ba@syzkaller.appspotmail.com Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-08-20HID: wacom: support named keys on older devicesAaron Armstrong Skomra
Some Wacom devices have keys with predefined meanings. However, when support was originally added for these devices, the codes for these keys were not available yet. These keys were thus reported with the numbered KEY_PROG* range. Some missing key codes were added with commit 4eb220cb35a9 ("HID: wacom: generic: add 3 tablet touch keys") and we are now able to report the proper key codes. We continue to report the original KEY_PROG codes so as not to break any unknown applications that may depend on them. Also, to support the touch key, track its state in the pad report. Signed-off-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> Link: https://gitlab.freedesktop.org/libinput/libinput/merge_requests/155 Link: https://github.com/linuxwacom/xf86-input-wacom/pull/46 Reviewed-by: Ping Cheng <ping.cheng@wacom.com> Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-08-20HID: wacom: Fix several minor compiler warningsJason Gerecke
Addresses a few issues that were noticed when compiling with non-default warnings enabled. The trimmed-down warnings in the order they are fixed below are: * declaration of 'size' shadows a parameter * '%s' directive output may be truncated writing up to 5 bytes into a region of size between 1 and 64 * pointer targets in initialization of 'char *' from 'unsigned char *' differ in signedness * left shift of negative value Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
generated by cgit (git 2.34.1) at 2025-09-22 00:12:31 +0000