summaryrefslogtreecommitdiff
path: root/drivers/hwmon
AgeCommit message (Collapse)Author
2021-04-20hwmon: replace snprintf in show functions with sysfs_emitGuenter Roeck
coccicheck complains about the use of snprintf() in sysfs show functions. drivers/hwmon/ina3221.c:701:8-16: WARNING: use scnprintf or sprintf This results in a large number of patch submissions. Fix it all in one go using the following coccinelle rules. Use sysfs_emit instead of scnprintf or sprintf since that makes more sense. @depends on patch@ identifier show, dev, attr, buf; @@ ssize_t show(struct device *dev, struct device_attribute *attr, char *buf) { <... return - snprintf(buf, \( PAGE_SIZE \| PAGE_SIZE - 1 \), + sysfs_emit(buf, ...); ...> } @depends on patch@ identifier show, dev, attr, buf, rc; @@ ssize_t show(struct device *dev, struct device_attribute *attr, char *buf) { <... rc = - snprintf(buf, \( PAGE_SIZE \| PAGE_SIZE - 1 \), + sysfs_emit(buf, ...); ...> } While at it, remove unnecessary braces and as well as unnecessary else after return statements to address checkpatch warnings in the resulting patch. Cc: Zihao Tang <tangzihao1@hisilicon.com> Cc: Jay Fang <f.fangjian@huawei.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (pmbus) Replace - with _ in device names before registrationChris Packham
The hwmon sysfs ABI requires that the `name` property doesn't include any dashes. But when the pmbus code picks the name up from the device tree it quite often does. Replace '-' with '_' before registering the device. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20210317040231.21490-2-chris.packham@alliedtelesis.co.nz Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: add driver for NZXT Kraken X42/X52/X62/X72Jonas Malaco
These are "all-in-one" CPU liquid coolers that can be monitored and controlled through a proprietary USB HID protocol. While the models have differently sized radiators and come with varying numbers of fans, they are all indistinguishable at the software level. The driver exposes fan/pump speeds and coolant temperature through the standard hwmon sysfs interface. Fan and pump control, while supported by the devices, are not currently exposed. The firmware accepts up to 61 trip points per channel (fan/pump), but the same set of trip temperatures has to be maintained for both; with pwmX_auto_point_Y_temp attributes, users would need to maintain this invariant themselves. Instead, fan and pump control, as well as LED control (which the device also supports for 9 addressable RGB LEDs on the CPU water block) are left for existing and already mature user-space tools, which can still be used alongside the driver, thanks to hidraw. A link to one, which I also maintain, is provided in the documentation. The implementation is based on USB traffic analysis. It has been runtime tested on x86_64, both as a built-in driver and as a module. Signed-off-by: Jonas Malaco <jonas@protocubo.io> Link: https://lore.kernel.org/r/20210319045544.416138-1-jonas@protocubo.io [groeck: Removed unnecessary spinlock.h include] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (ina2xx) Convert sysfs sprintf/snprintf family to sysfs_emitZihao Tang
Fix the following coccicheck warning: drivers/hwmon/ina2xx.c:313:8-16: WARNING: use scnprintf or sprintf drivers/hwmon/ina2xx.c:453:8-16: WARNING: use scnprintf or sprintf drivers/hwmon/ina2xx.c:484:8-16: WARNING: use scnprintf or sprintf drivers/hwmon/ina2xx.c:540:8-16: WARNING: use scnprintf or sprintf Signed-off-by: Zihao Tang <tangzihao1@hisilicon.com> Signed-off-by: Jay Fang <f.fangjian@huawei.com> Link: https://lore.kernel.org/r/1615892457-35501-1-git-send-email-f.fangjian@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: Use kobj_to_dev()Guenter Roeck
coccinelle complains about WARNING opportunity for kobj_to_dev() in several files, resulting in one-by-one patch submissions. Handle all remaining instances in one go. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (ds1621) Use kobj_to_dev()Tian Tao
fixed the following coccicheck: ./drivers/hwmon/ds1621.c:329:60-61: WARNING opportunity for kobj_to_dev(). Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Link: https://lore.kernel.org/r/1616032504-59817-1-git-send-email-tiantao6@hisilicon.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (ftsteutates) Fix spelling typozuoqilin
Change 'revsion' to 'revision'. Signed-off-by: zuoqilin <zuoqilin@yulong.com> Link: https://lore.kernel.org/r/20210318124637.1331-1-zuoqilin1@163.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (corsair-psu) add support for critical valuesWilken Gottwalt
Adds support for reading the critical values of the temperature sensors and the rail sensors (voltage and current) once and caches them. Updates the naming of the constants following a more clear scheme. Also updates the documentation and fixes some typos. Updates is_visible and ops_read functions to be more readable. The new sensors output of a Corsair HX850i will look like this: corsairpsu-hid-3-1 Adapter: HID adapter v_in: 230.00 V v_out +12v: 12.14 V (crit min = +8.41 V, crit max = +15.59 V) v_out +5v: 5.03 V (crit min = +3.50 V, crit max = +6.50 V) v_out +3.3v: 3.30 V (crit min = +2.31 V, crit max = +4.30 V) psu fan: 0 RPM vrm temp: +46.2°C (crit = +70.0°C) case temp: +39.8°C (crit = +70.0°C) power total: 152.00 W power +12v: 108.00 W power +5v: 41.00 W power +3.3v: 5.00 W curr +12v: 9.00 A (crit max = +85.00 A) curr +5v: 8.31 A (crit max = +40.00 A) curr +3.3v: 1.62 A (crit max = +40.00 A) Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net> Link: https://lore.kernel.org/r/YFNg6vGk3sQmyqgB@monster.powergraphx.local Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (pmbus/stpddc60) Add ST STPDDC60 pmbus driverErik Rosen
Add hardware monitoring support for ST STPDDC60 Unversal Digital Multicell Controller. Signed-off-by: Erik Rosen <erik.rosen@metormote.com> Link: https://lore.kernel.org/r/20210218115249.28513-3-erik.rosen@metormote.com [groeck: Fixed whitespace error in Makefile] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (pmbus) Add pmbus_set_update() function to set update flagErik Rosen
For the STPDDC60 chip, the vout alarm-limits are represented as an offset relative to the commanded output voltage. This means that the limits are dynamic and must not be cached by the pmbus driver. This patch adds a pmbus_set_sensor() function to pmbus_core to be able to set the update flag on selected sensors after auto-detection of limit attributes. Signed-off-by: Erik Rosen <erik.rosen@metormote.com> Link: https://lore.kernel.org/r/20210218115249.28513-2-erik.rosen@metormote.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (nct6683) Support NCT6686DJiqi Li
Add support for NCT6686D chip used in the Lenovo P620. Signed-off-by: Jiqi Li <lijq9@lenovo.com> Reviewed-by: Mark Pearson <markpearson@lenovo.com> Link: https://lore.kernel.org/r/20210304104421.1912934-1-lijq9@lenovo.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (pmbus) Add driver for Infineon IR36021Chris Packham
The IR36021 is a dual‐loop digital multi‐phase buck controller. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20210301035954.16713-3-chris.packham@alliedtelesis.co.nz Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (corsair-psu) Update calculation of LINEAR11 valuesWilken Gottwalt
Changes the way how LINEAR11 values are calculated. The new method increases the precision of 2-3 digits. old method: corsairpsu-hid-3-1 Adapter: HID adapter v_in: 230.00 V v_out +12v: 12.00 V v_out +5v: 5.00 V v_out +3.3v: 3.00 V psu fan: 0 RPM vrm temp: +44.0°C case temp: +37.0°C power total: 152.00 W power +12v: 112.00 W power +5v: 38.00 W power +3.3v: 5.00 W curr in: N/A curr +12v: 9.00 A curr +5v: 7.00 A curr +3.3v: 1000.00 mA new method: corsairpsu-hid-3-1 Adapter: HID adapter v_in: 230.00 V v_out +12v: 12.16 V v_out +5v: 5.01 V v_out +3.3v: 3.30 V psu fan: 0 RPM vrm temp: +44.5°C case temp: +37.8°C power total: 148.00 W power +12v: 108.00 W power +5v: 37.00 W power +3.3v: 4.50 W curr in: N/A curr +12v: 9.25 A curr +5v: 7.50 A curr +3.3v: 1.50 A Co-developed-by: Jack Doan <me@jackdoan.com> Signed-off-by: Jack Doan <me@jackdoan.com> Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net> Link: https://lore.kernel.org/r/YDoSMqFbgoTXyoru@monster.powergraphx.local Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: Switch to using the new API kobj_to_dev()Yang Li
fixed the following coccicheck: ./drivers/hwmon/hwmon.c:82:60-61: WARNING opportunity for kobj_to_dev() Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/1614071667-5665-1-git-send-email-yang.lee@linux.alibaba.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (adm9240) Convert to devm_hwmon_device_register_with_info APIGuenter Roeck
Also use regmap for register caching. This change reduces code and data size by more than 40%. While at it, fixed some warnings reported by checkpatch. Cc: Chris Packham <Chris.Packham@alliedtelesis.co.nz> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (adm9240) Store i2c device instead of client in local dataGuenter Roeck
We only use the pointer to i2c_client to access &client->dev. Store the device pointer directly instead of retrieving it from i2c_client. Cc: Chris Packham <Chris.Packham@alliedtelesis.co.nz> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-04-20hwmon: (adm9240) Drop log messages from detect functionGuenter Roeck
Not detecting a chip in the detect function is normal and should not generate any log messages, much less error messages. Cc: Chris Packham <Chris.Packham@alliedtelesis.co.nz> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-03-30hwmon: (scmi) port driver to the new scmi_sensor_proto_ops interfaceCristian Marussi
Port the scmi hwmon driver to the new SCMI sensor interface based on protocol handles and common devm_get_ops(). Link: https://lore.kernel.org/r/20210316124903.35011-25-cristian.marussi@arm.com Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jean Delvare <jdelvare@suse.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-03-25hwmon: (ntc_thermistor): try reading processedLinus Walleij
Before trying the custom method of reading the sensor as raw and then converting, we want to use iio_read_channel_processed_scale() which first tries to see if the ADC can provide a processed value directly, else reads raw and applies scaling inside of IIO using the scale attributes of the ADC. We need to multiply the scaled value with 1000 to get to microvolts from millivolts which is what processed IIO channels returns. Keep the code that assumes 12bit ADC around as a fallback. This gives correct readings on the AB8500 thermistor inputs used in the Ux500 HREFP520 platform for reading battery and board temperature. Cc: Peter Rosin <peda@axentia.se> Cc: Chris Lesiak <chris.lesiak@licor.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: linux-iio@vger.kernel.org Link: https://lore.kernel.org/linux-iio/20201224011607.1059534-1-linus.walleij@linaro.org/ Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Chris Lesiak <chris.lesiak@licor.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210308100219.2732156-2-linus.walleij@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-23hwmon: raspberry-pi: Clean-up few drivers by using managed work initMatti Vaittinen
Few drivers implement remove call-back only for ensuring a delayed work gets cancelled prior driver removal. Clean-up these by switching to use devm_delayed_work_autocancel() instead. This change is compile-tested only. All testing is appreciated. Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/4830f52d46278ea1c92ad7252f6050540346d8b7.1616506559.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-08hwmon: acpi_power_meter: Get rid of ACPICA message printingRafael J. Wysocki
Use acpi_evaluation_failure_warn() introduced previously instead of the ACPICA-specific ACPI_EXCEPTION() macro to log warning messages regarding ACPI object evaluation failures and use dev_err() instead of ACPI_EXCEPTION() to log _PMC package parsing failures, which is consistent with the other messages printed by the code in question. Next, drop the ACPI_MODULE_NAME() definition only used by the ACPICA message printing macro. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Guenter Roeck <linux@roeck-us.net>
2021-02-22Merge tag 'devicetree-for-5.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Sync dtc to upstream version v1.6.0-51-g183df9e9c2b9 and build host fdtoverlay - Add kbuild support to build DT overlays (%.dtbo) - Drop NULLifying match table in of_match_device(). In preparation for this, there are several driver cleanups to use (of_)?device_get_match_data(). - Drop pointless wrappers from DT struct device API - Convert USB binding schemas to use graph schema and remove old plain text graph binding doc - Convert spi-nor and v3d GPU bindings to DT schema - Tree wide schema fixes for if/then schemas, array size constraints, and undocumented compatible strings in examples - Handle 'no-map' correctly for already reserved memblock regions * tag 'devicetree-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (35 commits) driver core: platform: Drop of_device_node_put() wrapper of: Remove of_dev_{get,put}() dt-bindings: usb: Change descibe to describe in usbmisc-imx.txt dt-bindings: can: rcar_canfd: Group tuples in pin control properties dt-bindings: power: renesas,apmu: Group tuples in cpus properties dt-bindings: mtd: spi-nor: Convert to DT schema format dt-bindings: Use portable sort for version cmp dt-bindings: ethernet-controller: fix fixed-link specification dt-bindings: irqchip: Add node name to PRUSS INTC dt-bindings: interconnect: Fix the expected number of cells dt-bindings: Fix errors in 'if' schemas dt-bindings: iommu: renesas,ipmmu-vmsa: Make 'power-domains' conditionally required dt-bindings: Fix undocumented compatible strings in examples kbuild: Add support to build overlays (%.dtbo) scripts: dtc: Remove the unused fdtdump.c file scripts: dtc: Build fdtoverlay tool scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9 scripts: dtc: Fetch fdtoverlay.c from external DTC project dt-bindings: thermal: sun8i: Fix misplaced schema keyword in compatible strings dt-bindings: iio: dac: Fix AD5686 references ...
2021-02-22Merge tag 'thermal-v5.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal updates from Daniel Lezcano: - Use the newly introduced 'hot' and 'critical' ops for the acpi thermal driver (Daniel Lezcano) - Remove the notify ops as it is no longer used (Daniel Lezcano) - Remove the 'forced passive' option and the unused bind/unbind functions (Daniel Lezcano) - Remove the THERMAL_TRIPS_NONE and the code cleanup around this macro (Daniel Lezcano) - Rework the delays to make them pre-computed instead of computing them again and again at each polling interval (Daniel Lezcano) - Remove the pointless 'thermal_zone_device_reset' function (Daniel Lezcano) - Use the critical and hot ops to prevent an unexpected system shutdown on int340x (Kai-Heng Feng) - Make the cooling device state private to the thermal subsystem (Daniel Lezcano) - Prevent to use not-power-aware actor devices with the power allocator governor (Lukasz Luba) - Remove 'zx' and 'tango' support along with the corresponding platforms (Arnd Bergman) - Fix several issues on the Omap thermal driver (Tony Lindgren) - Add support for adc-tm5 PMIC thermal monitor for Qcom platforms (Dmitry Baryshkov) - Fix an initialization loop in the adc-tm5 (Colin Ian King) - Fix a return error check in the cpufreq cooling device (Viresh Kumar) * tag 'thermal-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (26 commits) thermal: cpufreq_cooling: freq_qos_update_request() returns < 0 on error thermal: qcom: Fix comparison with uninitialized variable channels_available thermal: qcom: add support for adc-tm5 PMIC thermal monitor dt-bindings: thermal: qcom: add adc-thermal monitor bindings thermal: ti-soc-thermal: Use non-inverted define for omap4 thermal: ti-soc-thermal: Simplify polling with iopoll thermal: ti-soc-thermal: Fix stuck sensor with continuous mode for 4430 thermal: ti-soc-thermal: Skip pointless register access for dra7 thermal/drivers/zx: Remove zx driver thermal/drivers/tango: Remove tango driver thermal: power allocator: fail binding for non-power actor devices thermal/core: Make cooling device state change private thermal: intel: pch: Fix unexpected shutdown at critical temperature thermal: int340x: Fix unexpected shutdown at critical temperature thermal/core: Remove pointless thermal_zone_device_reset() function thermal/core: Remove ms based delay fields thermal/core: Use precomputed jiffies for the polling thermal/core: Precompute the delays from msecs to jiffies thermal/core: Remove unused macro THERMAL_TRIPS_NONE thermal/core: Remove THERMAL_TRIPS_NONE test ...
2021-02-22Merge tag 'hwmon-for-v5.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: "New drivers: - Texas Instruments TPS23861 driver - AHT10 Temperature and Humidity Sensor Driver Support for new chips/variants to existing drivers: - Add AMD family 19h model 30h x86 match to amd_energy driver - Add Zen3 Ryzen Desktop CPUs support to k10temp driver - Add support for MAX16508 to max16601 driver - Support revision "B" of max31785 - Add support for ASRock boards to nct6683 driver Driver removals: - Decomission abx500 driver Various other minor fixes and improvements" * tag 'hwmon-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (30 commits) MAINTAINERS: Add entry for Texas Instruments TPS23861 PoE PSE hwmon: add Texas Instruments TPS23861 driver dt-bindings: hwmon: Add TI TPS23861 bindings hwmon: (da9052) Switch to using the new API kobj_to_dev() hwmon: (amd_energy) Add AMD family 19h model 30h x86 match hwmon: (pmbus/max31785) Support revision "B" hwmon: (pmbus/lm25066) Remove unnecessary pmbus_clear_cache function call hwmon: (pmbus) Clear sensor data after chip write hwmon: (pmbus/max16601) Add support for MAX16508 hwmon: (pmbus/max16601) Determine and use number of populated phases hwmon: (pmbus) Simplify the calculation of variables hwmon: (aht10) Unlock on error in aht10_read_values() hwmon: (pwm-fan) stop using legacy PWM functions and some cleanups hwmon: Add AHT10 Temperature and Humidity Sensor Driver hwmon: (applesmc) Assign boolean values to a bool variable hwmon: (nct6683) Support ASRock boards hwmon: (aspeed-pwm-tacho) Switch to using the new API kobj_to_dev() hwmon: (max6650) Switch to using the new API kobj_to_dev() hwmon: (pwm-fan) Support multiple fan tachometers hwmon: (pwm-fan) Store tach data separately ...
2021-02-12hwmon: add Texas Instruments TPS23861 driverRobert Marko
Add basic monitoring support as well as port on/off control for Texas Instruments TPS23861 PoE PSE IC. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210121134434.2782405-2-robert.marko@sartura.hr Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-02-11hwmon: (da9052) Switch to using the new API kobj_to_dev()Tian Tao
Switch to using the new API kobj_to_dev() to fix the below warnning: /drivers/hwmon/da9052-hwmon.c:302:60-61: WARNING opportunity for kobj_to_dev(). Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Link: https://lore.kernel.org/r/1612860208-51088-1-git-send-email-tiantao6@hisilicon.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-02-11hwmon: (amd_energy) Add AMD family 19h model 30h x86 matchNaveen Krishna Chatradhi
Add X86 CPU match for AMD family 19h model 30h. This is necessary to enable support for energy reporting via the amd_energy module. Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com> Link: https://lore.kernel.org/r/20210211172054.246276-1-nchatrad@amd.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-02-01hwmon: (pmbus/max31785) Support revision "B"Matthew Barth
There was an issue in how the tach feedbacks of dual rotor fans were reported during any change in fan speeds with revision "A" of the MAX31785. When the fan speeds would transition to a new target speed, the rotor not wired to the TACH input when TACHSEL = 0 would report a speed of 0 until the new target was reached. This has been fixed, resulting in a revision "B" update where the MFR_REVISION of "B" is 0x3061. Signed-off-by: Matthew Barth <msbarth@linux.ibm.com> Link: https://lore.kernel.org/r/20210201212217.73721-1-msbarth@linux.ibm.com [groeck: Change 'ret' variable type to int] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-02-01hwmon: (pmbus/lm25066) Remove unnecessary pmbus_clear_cache function callErik Rosen
It is no longer necessary to clear the cache to update the sensor value from the chip. Signed-off-by: Erik Rosen <erik.rosen@metormote.com> Link: https://lore.kernel.org/r/20210201195929.1200-3-erik.rosen@metormote.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-02-01hwmon: (pmbus) Clear sensor data after chip writeErik Rosen
Set the sensor->data field to -ENODATA to force a chip access next time the sensor value is read. Signed-off-by: Erik Rosen <erik.rosen@metormote.com> Link: https://lore.kernel.org/r/20210201195929.1200-2-erik.rosen@metormote.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-29hwmon: (pmbus/max16601) Add support for MAX16508Guenter Roeck
MAX16508 is quite similar to MAX16601, except that it does not support the DEFAULT_NUM_POP register and we thus can not dynamically determine the number of populated phases. Cc: Alex Qiu <xqiu@google.com> Cc: Ugur Usug <Ugur.Usug@maximintegrated.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210125185327.93282-2-linux@roeck-us.net Reviewed-by: Alex Qiu <xqiu@google.com> Tested-by: Alex Qiu <xqiu@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-29hwmon: (pmbus/max16601) Determine and use number of populated phasesGuenter Roeck
The MAX16601 can report the number of populated phases. Use this information to only create sysfs attributes for populated phases. Cc: Alex Qiu <xqiu@google.com> Cc: Ugur Usug <Ugur.Usug@maximintegrated.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210125185327.93282-1-linux@roeck-us.net Reviewed-by: Alex Qiu <xqiu@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-28hwmon: (lm70) Use device_get_match_data()Stephen Boyd
Use the more modern API to get the match data out of the of match table. This saves some code, lines, and nicely avoids referencing the match table when it is undefined with configurations where CONFIG_OF=n. Signed-off-by: Stephen Boyd <swboyd@chromium.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: <linux-hwmon@vger.kernel.org> [robh: rework to use device_get_match_data()] Signed-off-by: Rob Herring <robh@kernel.org>
2021-01-27hwmon: (pmbus) Simplify the calculation of variablesJiapeng Zhong
Fix the following coccicheck warnings: ./drivers/hwmon/pmbus/pmbus_core.c:1265:24-26: WARNING !A || A && B is equivalent to !A || B. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com> Link: https://lore.kernel.org/r/1611642100-29937-1-git-send-email-abaci-bugfix@linux.alibaba.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27hwmon: (aht10) Unlock on error in aht10_read_values()Dan Carpenter
This error path needs to drop the lock before returning. Fixes: afd018716398 ("hwmon: Add AHT10 Temperature and Humidity Sensor Driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YBD5Ro549hMJSnW4@mwanda Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27hwmon: (pwm-fan) stop using legacy PWM functions and some cleanupsUwe Kleine-König
pwm_apply_state() does what the legacy functions pwm_config() and pwm_{en,dis}able() do in a single function call. This simplifies error handling and is more efficient for new-style PWM hardware drivers. Instead of repeatedly querying the PWM framework about the initial PWM configuration, cache the settings in driver data. Also use __set_pwm() in .probe() to have the algorithm calculating the PWM state in a single place. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20210112191314.124686-1-u.kleine-koenig@pengutronix.de [groeck: Added missing empty line after declaration] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27hwmon: Add AHT10 Temperature and Humidity Sensor DriverJohannes Cornelis Draaijer (datdenkikniet)
This patch adds a hwmon driver for the AHT10 Temperature and Humidity sensor. It has a maximum sample rate, as the datasheet states that the chip may heat up if it is sampled more than once every two seconds. Has been tested a to work on a raspberrypi0w Signed-off-by: Johannes Cornelis Draaijer (datdenkikniet) <jcdra1@gmail.com> Link: https://lore.kernel.org/r/20210107194014.GA88780@desktop [groeck: dropped AHT10_ADDR (unused) and use AHT10_MEAS_SIZE where appropriate; dropped change log] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27hwmon: (applesmc) Assign boolean values to a bool variableJiapeng Zhong
Fix the following coccicheck warnings: ./drivers/hwmon/applesmc.c:568:6-23: WARNING: Assignment of 0/1 to bool variable. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com> Link: https://lore.kernel.org/r/1611124870-125658-1-git-send-email-abaci-bugfix@linux.alibaba.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27hwmon: (nct6683) Support ASRock boardsBlaž Hrastnik
Tested with ASRock X570 Phantom Gaming-ITX/TB3. It also appears on other ASRock boards. Signed-off-by: Blaž Hrastnik <blaz@mxxn.io> Link: https://lore.kernel.org/r/b08d641c-3fb5-4845-85f7-e1753149cd7d@www.fastmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27hwmon: (aspeed-pwm-tacho) Switch to using the new API kobj_to_dev()Tian Tao
fixed the following coccicheck: drivers/hwmon/aspeed-pwm-tacho.c:634:60-61: WARNING opportunity for kobj_to_dev() drivers/hwmon/aspeed-pwm-tacho.c:623:60-61: WARNING opportunity for kobj_to_dev() Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Acked-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/1609725945-13895-1-git-send-email-tiantao6@hisilicon.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27hwmon: (max6650) Switch to using the new API kobj_to_dev()Tian Tao
Switch to using the new API kobj_to_dev() to fix the below warnning: drivers/hwmon/max6650.c:324:60-61: WARNING opportunity for kobj_to_dev(). Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Link: https://lore.kernel.org/r/1609376621-46463-1-git-send-email-tiantao6@hisilicon.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27hwmon: (pwm-fan) Support multiple fan tachometersPaul Barker
The pwm-fan driver is extended to support multiple fan tachometer signals connected to GPIO inputs. This is intended to support the case where a single PWM output signal is routed to multiple fans, each of which have a tachometer output connected back to a GPIO pin. The number of fan tachometer inputs is determined by the number of interrupt sources configured for the pwm-fan device. The number of pulses-per-revolution entries should match the number of interrupt sources so that each input has a value assigned. The fan tachometer measurements are exposed as sysfs files fan1_input, fan2_input, etc up to the number of configured inputs. Signed-off-by: Paul Barker <pbarker@konsulko.com> Link: https://lore.kernel.org/r/20201212195008.6036-3-pbarker@konsulko.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27hwmon: (pwm-fan) Store tach data separatelyPaul Barker
The data for the (optional) fan tachometer input is moved to a separate structure which is only allocated if an input is actually configured. After this change the pulse IRQ handler takes a pointer to the tachometer data structure instead of the whole device context. Signed-off-by: Paul Barker <pbarker@konsulko.com> Link: https://lore.kernel.org/r/20201212195008.6036-2-pbarker@konsulko.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27hwmon: (gpio-fan) Switch to using the new API kobj_to_dev()Tian Tao
fixed the following coccicheck: drivers/hwmon/gpio-fan.c:302:60-61: WARNING opportunity for kobj_to_dev() Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Link: https://lore.kernel.org/r/1609211837-54930-1-git-send-email-tiantao6@hisilicon.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27hwmon: (pmbus/ibm-cffps) Set the PMBUS_NO_CAPABILITY flagEddie James
Several power supplies supported by the IBM CFFPS driver don't report valid data in the CAPABILITY register. This results in PEC being enabled when it's not supported by the device, and since the automatic version detection might fail, disable use of the CAPABILITY register across the board for this driver. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20201222152640.27749-3-eajames@linux.ibm.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27hwmon: (pmbus) Add a PMBUS_NO_CAPABILITY platform data flagEddie James
Some PMBus chips don't respond with valid data when reading the CAPABILITY register. Add a flag that device drivers can set so that the PMBus core driver doesn't use CAPABILITY to determine it's behavior. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20201222152640.27749-2-eajames@linux.ibm.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27hwmon: (k10temp) Zen3 Ryzen Desktop CPUs supportGabriel Craciunescu
The module has only support for Zen3 server CPUs right now. Add support for Family 0x19, model 0x21 which are Zen3 Ryzen Desktop CPUs. Tested on 5800x, 5900x and 5950x CPUs. Signed-off-by: Gabriel Craciunescu <nix.or.die@gmail.com> Link: https://lore.kernel.org/r/20201223005315.20077-1-nix.or.die@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27hwmon: (abx500) Decomission abx500 driverGuenter Roeck
This deletes the ABx500 hwmon driver, the only supported variant being the AB8500. This driver has been replaced by generic frameworks. By inspecting the abx500 sysfs files we see that it contains things such as temp1_max, temp1_max_alarm, temp1_max_hyst, temp1_max_hyst_alarm, temp1_min, temp1_min_alarm. It becomes obvious that the abx500.c is a reimplementation of thermal zones. This is not very strange as the generic thermal zones were not invented when this driver was merged so people were rolling their own. The ab8500.c driver contains conversion tables for handling a thermistor on ADC channels AUX1 and AUX2. I managed to replace the functionality of the driver with: - Activation of the ntc_thermistor.c driver, CONFIG_SENSORS_NTC_THERMISTOR - Activation of thermal zones, CONFIG_THERMAL - In the device tree, connecting the NTC driver to the processed IIO channels from the AB8500 GPADC ADC forming two instances of NTC sensors. - Connecting the two NTC sensors to a "chassis" thermal zone in the device tree and setting that to hit the CPU frequency at 50 degrees celsius and do a critical shutdown at 70 degrees celsius, deploying a policy using the sensors. After talking to the original authors we concluded that the driver was never properly parameterized in production so what we now have in the device tree is already puts the thermistors to better use than what the hwmon driver did. The two remaining channels for two battery temperatures is already handled in the charging algorithms but can be optionally extended to thermal zones as well if we want these to trigger critical shutdown for the platform. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20201221125521.768082-1-linus.walleij@linaro.org [groeck: Removed documentation and fixed up Makefile, Kconfig] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27hwmon: (w83627ehf) Switch to using the new API kobj_to_dev()Tian Tao
Switch to using the new API kobj_to_dev() to fix the below warnning: drivers/hwmon/w83627ehf.c:1113:60-61: WARNING opportunity for kobj_to_dev(). Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Link: https://lore.kernel.org/r/1607907735-17510-1-git-send-email-tiantao6@hisilicon.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27hwmon: (smsc47m1) Remove 'h' from printk format specifierTom Rix
See Documentation/core-api/printk-formats.rst. h should no longer be used in the format specifier for printk. Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20201215183237.2071770-1-trix@redhat.com [groeck: Updated subject] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
generated by cgit (git 2.34.1) at 2025-09-12 06:42:44 +0000