summaryrefslogtreecommitdiff
path: root/drivers/i2c/busses
AgeCommit message (Collapse)Author
2019-02-14i2c: tegra: sort all the include headers alphabeticallySowjanya Komatineni
This patch sorts all the include headers alphabetically for the I2C Tegra driver. Acked-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-02-14Merge branch 'i2c/for-current' into i2c/for-5.1Wolfram Sang
2019-02-08i2c: rcar: refactor TCYC handlingWolfram Sang
The latest documentation made it clear that we need to initialize the TCYC value independently of DMA. The old code used TCYC06 (wrongly) for non-DMA transfers. The new code sets TCYC up independently from DMA. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-02-08i2c: gpio: merge two very similar commentsWolfram Sang
I think it is clear enough if we have the explanation once and make it clear it is applicable for both SCL and SDA. Reword it a little with the help of Simon's native language skills :) Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-02-08i2c: sh_mobile: use new clock calculation formulas for Gen2Wolfram Sang
We measured the clock on a Lager and an Ebisu board. The new formula gives better results for both. So after Gen3, switch to this formula for all Gen2 SoCs. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-02-08i2c: sh_mobile: use new clock calculation formulas for Gen3Wolfram Sang
We could finally measure the clock on an Ebisu board. The new formula gives way better results, i.e. 100kHz instead of 106kHz and 400kHz instead of 387kHz. Switch to these formulas for all Gen3 SoCs. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-02-08i2c: sh_mobile: sort compatible entriesWolfram Sang
Makes it easier to add new ones. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-02-08i2c: cbus-gpio: Switch to use GPIO descriptorsLinus Walleij
This augments the CBUS GPIO I2C driver to use GPIO descriptors for clock, sel and data. We drop the platform data that was only used for carrying GPIO numbers and use machine descriptor tables instead. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-02-05i2c: rcar: comment maintenanceWolfram Sang
Update copyright years and remove a comment which grew incorrect and useless over time. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-02-05i2c: gpio: fault-injector: sort debugfs files alphabeticallyWolfram Sang
There is no value in chronological sorting. Make it easier to follow for humans. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-02-05i2c: mediatek: remove completion_done()qii wang
Completion_done() is useless when we don't use its return value, so we remove it. Signed-off-by: qii wang <qii.wang@mediatek.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-02-05i2c: mediatek: speeds is replaced by macros definitionsqii wang
Different speeds have been defined by macros, so we use macros definitions. Signed-off-by: qii wang <qii.wang@mediatek.com> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-02-05i2c: gpio: sort includesWolfram Sang
Less risk for duplications when adding new ones. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-02-05i2c: iop3xx: Add device tree probingLinus Walleij
This adds device tree probing support for the IOP3xx I2C master. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-02-05i2c: omap: Use noirq system sleep pm ops to idle device for suspendTony Lindgren
We currently get the following error with pixcir_ts driver during a suspend resume cycle: omap_i2c 4802a000.i2c: controller timed out pixcir_ts 1-005c: pixcir_int_enable: can't read reg 0x34 : -110 pixcir_ts 1-005c: Failed to disable interrupt generation: -110 pixcir_ts 1-005c: Failed to stop dpm_run_callback(): pixcir_i2c_ts_resume+0x0/0x98 [pixcir_i2c_ts] returns -110 PM: Device 1-005c failed to resume: error -110 And at least am437x based devices with pixcir_ts will fail to resume to a touchscreen that is configured as the wakeup-source in device tree for these devices. This is because pixcir_ts tries to reconfigure it's registers for noirq suspend which fails. This also leaves i2c-omap in enabled state for suspend. Let's fix the pixcir_ts issue and make sure i2c-omap is suspended by adding SET_NOIRQ_SYSTEM_SLEEP_PM_OPS. Let's also get rid of some ifdefs while at it and replace them with __maybe_unused as SET_RUNTIME_PM_OPS and SET_NOIRQ_SYSTEM_SLEEP_PM_OPS already deal with the various PM Kconfig options. Reported-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-02-01PCI: Move Rohm Vendor ID to generic listAndy Shevchenko
Move the Rohm Vendor ID to pci_ids.h instead of defining it in several drivers. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-23i2c: aspeed: Remove hard-coded bus timeout value settingJae Hyun Yoo
This commit removes hard-coded bus timeout value setting so that it can be set by i2c-core-base. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-23i2c: sh_mobile: update copyright and commentsWolfram Sang
Update copyright years and add Renesas to it. Add/update comments to make driver easier to understand. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-23i2c: sh_mobile: refactor rx isrWolfram Sang
Remove the do_while loop which was just there to have an easy exit with "break;" and replace it with if-else-blocks which should make the state machine clearer. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-23i2c: sh_mobile: replace break; with if-blockWolfram Sang
In preparation to remove the do-while-loop. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-23i2c: sh_mobile: remove is_first_byte functionWolfram Sang
All state machines deal with pd->pos values. This helper function is an exception and makes it only more confusing. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-23i2c: sh_mobile: drop 'data' argument from i2c_op functionWolfram Sang
It is clear that we always send the address in TX_FIRST and data in TX. No need to pass it from the caller. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-23i2c: sh_mobile: remove get_data functionWolfram Sang
It makes the code much easier comprehensible to explicitly code that the first byte will be client address and all the following bytes are the actual data. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-23i2c: sh_mobile: simplify sending address for RXWolfram Sang
pd->pos won't be smaller than -1, so we can simplify the logic. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-22i2c: rcar: Fix clients using i2c from suspend callbackGeert Uytterhoeven
When doing s2idle/s2ram on Salvator-X(S): WARNING: CPU: 2 PID: 971 at drivers/i2c/i2c-core-base.c:1869 __i2c_transfer+0x608/0x910 [...] Call trace: __i2c_transfer+0x608/0x910 i2c_smbus_xfer_emulated+0x158/0x5b0 __i2c_smbus_xfer+0x17c/0x818 i2c_smbus_xfer+0x64/0x98 i2c_smbus_read_byte_data+0x40/0x70 cs2000_bset.isra.1+0x2c/0x68 __cs2000_set_rate.constprop.7+0x80/0x148 cs2000_resume+0x18/0x20 dpm_run_callback+0x74/0x330 device_resume_early+0xd4/0x120 dpm_resume_early+0x158/0x4f8 suspend_devices_and_enter+0x36c/0xd98 [...] On second resume, the sound driver fails with: cs2000-cp 2-004f: pll lock failed rcar_sound ec500000.sound: can't use clk 1 As the CS2000 clock driver needs to send I2C messages during suspend, the I2C controller driver should be suspended later, and resumed earlier. Fix this by using the noirq sleep ops instead of the normal sleep ops, which are called after the late sleep ops, as used by the CS2000 clock driver. Fixes: 18569fa89a4db9ed ("i2c: rcar: add suspend/resume support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-22i2c: imx: Fix inconsistent IS_ERR and PTR_ERR in i2c_imx_dma_request()YueHaibing
Change the call to PTR_ERR to access the value just tested by IS_ERR. Fixes: 5b3a23a3cc94 ("i2c: imx: notify about real errors on dma i2c_imx_dma_request") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Esben Haabendal <esben@haabendal.dk> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-15i2c: imx: improve the error handling in i2c_imx_dma_request()Oleksij Rempel
Improve the error handling in i2c_imx_dma_request() and let it return an error indication that the caller then can handle accordingly. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-15i2c: imx: notify about real errors on dma i2c_imx_dma_requestOleksij Rempel
At least on i.MX5x, the DMA events for I2C and SDHC use the same channel and there can only be a single user. So in this case there should be no message emitted that looks like an error if the I2C device doesn't have an assigned DMA channel. In contrast real problems that were only emitted at debug level before should be described at a higher level to be better visible and so understandable. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-11i2c: tegra: Fix Maximum transfer sizeSowjanya Komatineni
Tegra194 supports maximum 64K Bytes transfer per packet. Tegra186 and prior supports maximum 4K Bytes transfer per packet. This patch fixes this payload difference between Tegra194 and prior Tegra chipsets using separate i2c_adapter_quirks. Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-08i2c: rcar: add suspend/resume supportWolfram Sang
Because the adapter will be set up before every transaction anyhow, we just need to mark it as suspended to the I2C core. Signed-off-by: Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-08i2c: s3c2410: use core helper to mark adapter suspendedWolfram Sang
Rejecting transfers should be handled by the core. Also, this will ensure proper locking which was forgotten in this open coded version. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-08i2c: exynos5: use core helper to mark adapter suspendedWolfram Sang
Rejecting transfers should be handled by the core. Also, this will ensure proper locking which was forgotten in this open coded version. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-08i2c: sprd: use core helper to mark adapter suspendedWolfram Sang
Rejecting transfers should be handled by the core. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-08i2c: sprd: don't use pdev as variable name for struct device *Wolfram Sang
The pointer to a device is usually named 'dev'. These 'pdev' here look much like copy&paste errors. Fix them to avoid confusion. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-08i2c: zx2967: use core helper to mark adapter suspendedWolfram Sang
Rejecting transfers should be handled by the core. Also, this will ensure proper locking which was forgotten in this open coded version and make sure resume mark is set after enabling clocks (not before). Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-08i2c: brcmstb: use core helper to mark adapter suspendedWolfram Sang
Rejecting transfers should be handled by the core. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-08i2c: synquacer: remove unused is_suspended flagWolfram Sang
This flag was defined and checked but never set a value. Remove it. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-05Merge branch 'i2c/for-5.0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "I2C has only driver updates for you this time. Mostly new IDs/DT compatibles, also SPDX conversions, small cleanups. STM32F7 got FastMode+ and PM support, Axxia some reliabilty improvements" * 'i2c/for-5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (26 commits) i2c: Add Actions Semiconductor Owl family S700 I2C support dt-bindings: i2c: Add S700 support for Actions Semi Soc's i2c: ismt: Add support for Intel Cedar Fork i2c: tegra: Switch to SPDX identifier i2c: tegra: Add missing kerneldoc for some fields i2c: tegra: Cleanup kerneldoc comments i2c: axxia: support sequence command mode dt-bindings: i2c: rcar: Add r8a774c0 support dt-bindings: i2c: sh_mobile: Add r8a774c0 support i2c: sh_mobile: Add support for r8a774c0 (RZ/G2E) i2c: i2c-cros-ec-tunnel: Switch to SPDX identifier. i2c: powermac: Use of_node_name_eq for node name comparisons i2c-axxia: check for error conditions first i2c-axxia: dedicated function to set client addr dt-bindings: i2c: Use correct vendor prefix for Atmel i2c: tegra: replace spin_lock_irqsave with spin_lock in ISR eeprom: at24: add support for 24c2048 dt-bindings: eeprom: at24: add "atmel,24c2048" compatible string i2c: i2c-stm32f7: add PM Runtime support i2c: sh_mobile: add support for r8a77990 (R-Car E3) ...
2019-01-03i2c: Add Actions Semiconductor Owl family S700 I2C supportParthiban Nallathambi
Add S700 to the list of devices supported by Owl I2C driver. Add Actions Semiconductor Owl family S700 I2C driver. Signed-off-by: Parthiban Nallathambi <pn@denx.de> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-01-03i2c: ismt: Add support for Intel Cedar ForkJarkko Nikula
Add PCI ID for the Intel Cedar Fork iSMT SMBus controller. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> [wsa: kept sorting] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-12-17i2c: tegra: Switch to SPDX identifierThierry Reding
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-12-17i2c: tegra: Add missing kerneldoc for some fieldsThierry Reding
Not all fields were properly documented. Add kerneldoc for the missing fields to prevent the build from flagging them. Reported-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-12-17i2c: tegra: Cleanup kerneldoc commentsThierry Reding
Some of the kerneldoc uses a strange spelling for abbreviations. Turn them into all-uppercase and clean up some whitespace issues while at it. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-12-17i2c: axxia: support sequence command modeAdamski, Krzysztof (Nokia - PL/Wroclaw)
In order to comply with SMBus specification, the Axxia I²C module will abort the multi message transfer if the delay between finishing sending one message and starting another is longer than 25ms. Unfortunately it isn't that hard to trigger this situation on a busy system. In order to fix this problem, we should make sure hardware does whole transaction without waiting for software to fill some data. Fortunately, in addition to Manual mode that is currently used by the driver to perform I²C transfers, the module supports also so called Sequence mode. In this mode, the module automatically performs predefined sequence of operations - it sends a slave address, transmits specified number of bytes from the FIFO, changes transfer direction, resends the slave address and then reads specified number of bytes to FIFO. While very inflexible, this does fit a most common case of multi message transfer - the one where you first write a register number you want to read and then read it. To use this mode effectively, a number of conditions must be met to ensure the transaction does fit the predefined sequence. In case this is not the case, a fallback to manual mode is used. The initialization of this mode is very similar to Manual mode. The most notable difference is different bit in the Master Interrupt Status designating finishing of transaction. Also some of the errors, like TSS, cannot happen in this mode. While it is possible to support transactions requesting a read of any size (RFL interrupt will be generated when FIFO size is not enough) the TFL interrupt is not available in this mode, thus the write part of the transaction cannot exceed FIFO_SIZE (8). Note that in case of a NAK during transaction, the NA/ND status bits will be set before STOP command is generated, triggering an interrupt while the controller is still busy. Current solution for this problem is to actively wait for this command to stop before leaving xfer callback. Signed-off-by: Krzysztof Adamski <krzysztof.adamski@nokia.com> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> [wsa: added braces around else branch spotted by checkpatch] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-12-17i2c: sh_mobile: Add support for r8a774c0 (RZ/G2E)Fabrizio Castro
Similarly to R-Car E3, RZ/G2E doesn't come with automatic transmission registers, as such it is not considered compatible with the existing fallback bindings. Add SoC specific binding compatibility to allow for later support for automatic transmission. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-12-17i2c: i2c-cros-ec-tunnel: Switch to SPDX identifier.Enric Balletbo i Serra
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-12-11i2c: nvidia-gpu: mark resume function as __maybe_unusedArnd Bergmann
When CONFIG_PM is disabled, this is needed to avoid a harmless unused-function warning: drivers/i2c/busses/i2c-nvidia-gpu.c:345:12: error: 'gpu_i2c_resume' defined but not used [-Werror=unused-function] Fixes: c71bcdcb42a7 ("i2c: add i2c bus driver for NVIDIA GPU") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-12-11i2c: powermac: Use of_node_name_eq for node name comparisonsRob Herring
Convert string compares of DT node names to use of_node_name_eq helper instead. This removes direct access to the node name pointer. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-12-11i2c-axxia: check for error conditions firstAdamski, Krzysztof (Nokia - PL/Wroclaw)
It was observed that when using seqentional mode contrary to the documentation, the SS bit (which is supposed to only be set if automatic/sequence command completed normally), is sometimes set together with NA (NAK in address phase) causing transfer to falsely be considered successful. My assumption is that this does not happen during manual mode since the controller is stopping its work the moment it sets NA/ND bit in status register. This is not the case in Automatic/Sequentional mode where it is still working to send STOP condition and the actual status we get depends on the time when the ISR is run. This patch changes the order of checking status bits in ISR - error conditions are checked first and only if none of them occurred, the transfer may be considered successful. This is required to introduce using of sequentional mode in next patch. Signed-off-by: Krzysztof Adamski <krzysztof.adamski@nokia.com> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-12-11i2c-axxia: dedicated function to set client addrAdamski, Krzysztof (Nokia - PL/Wroclaw)
This patch moves configuration of hardware registers used for setting i2c client address to separate function. It is preparatory change for next commit. Signed-off-by: Krzysztof Adamski <krzysztof.adamski@nokia.com> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
generated by cgit (git 2.34.1) at 2025-09-23 08:06:34 +0000