summaryrefslogtreecommitdiff
path: root/drivers/iio/adc
AgeCommit message (Collapse)Author
2021-10-19iio: adc: aspeed: Fix the calculate error of clock.Billy Tsai
The ADC clock formula is ast2400/2500: ADC clock period = PCLK * 2 * (ADC0C[31:17] + 1) * (ADC0C[9:0] + 1) ast2600: ADC clock period = PCLK * 2 * (ADC0C[15:0] + 1) They all have one fixed divided 2 and the legacy driver didn't handle it. This patch register the fixed factory clock device as the parent of ADC clock scaler to fix this issue. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Link: https://lore.kernel.org/r/20210922081520.30580-8-billy_tsai@aspeedtech.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-10-19iio: adc: aspeed: Support ast2600 adc.Billy Tsai
Make driver to support ast2600 adc device. - Use shared reset controller - Complete the vref configure function - Add the model data for ast2600 adc Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Link: https://lore.kernel.org/r/20210922081520.30580-7-billy_tsai@aspeedtech.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-10-19iio: adc: aspeed: Use devm_add_action_or_reset.Billy Tsai
This patch use devm_add_action_or_reset to handle the error in probe phase. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Link: https://lore.kernel.org/r/20210922081520.30580-6-billy_tsai@aspeedtech.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-10-19iio: adc: aspeed: Use model_data to set clk scaler.Billy Tsai
This patch uses need_prescaler and scaler_bit_width to set the ADC clock scaler. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Link: https://lore.kernel.org/r/20210922081520.30580-5-billy_tsai@aspeedtech.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-10-19iio: adc: aspeed: Add vref config functionBilly Tsai
Add the function to check the vref_fixed_mv and set the value to driver data. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Link: https://lore.kernel.org/r/20210922081520.30580-4-billy_tsai@aspeedtech.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-10-19iio: adc: aspeed: Restructure the model dataBilly Tsai
This patch refactors the model data structure to distinguish the function form different versions of aspeed ADC. - Rename the vref_voltage to vref_fixed_mv and add vref_mv driver data When driver probe will check vref_fixed_mv value and store it to vref_mv which isn't const value. - Add num_channels Make num_channles of iio device can be changed by different model_data - Add need_prescaler flag and scaler_bit_width The need_prescaler flag is used to tell the driver the clock divider needs another Prescaler and the scaler_bit_width to set the clock divider bitfield width. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Link: https://lore.kernel.org/r/20210922081520.30580-3-billy_tsai@aspeedtech.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-10-19iio: adc: aspeed: Keep model data to driver data.Billy Tsai
Keep the model data pointer to driver data for reducing the usage of of_device_get_match_data(). Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Link: https://lore.kernel.org/r/20210922081520.30580-2-billy_tsai@aspeedtech.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-10-17iio: adc: tsc2046: fix scan interval warningOleksij Rempel
Sync if statement with the actual warning. Fixes: 9504db5765e8 ("iio: adc: tsc2046: fix a warning message in tsc2046_adc_update_scan_mode()") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20211007093007.1466-2-o.rempel@pengutronix.de Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-10-17iio: adc: exynos: describe drivers in KConfigKrzysztof Kozlowski
Describe better which driver applies to which SoC, to make configuring kernel for Samsung SoC easier. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210924133515.112357-1-krzysztof.kozlowski@canonical.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-10-17iio: adc: rockchip_saradc: Make use of the helper function ↵Cai Huoqing
devm_platform_ioremap_resource() Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Link: https://lore.kernel.org/r/20210908105631.1474-1-caihuoqing@baidu.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-10-17iio: ep93xx: Make use of the helper function devm_platform_ioremap_resource()Cai Huoqing
Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Link: https://lore.kernel.org/r/20210908105646.1576-1-caihuoqing@baidu.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-09-26iio: mtk-auxadc: fix case IIO_CHAN_INFO_PROCESSEDHui Liu
The previous driver does't apply the necessary scaling to take the voltage range into account. We change readback value from raw data to input voltage to fix case IIO_CHAN_INFO_PROCESSED. Fixes: ace4cdfe67be ("iio: adc: mt2701: Add Mediatek auxadc driver for mt2701.") Signed-off-by: Hui Liu <hui.liu@mediatek.com> Link: https://lore.kernel.org/r/20210926073028.11045-2-hui.liu@mediatek.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-09-14iio: adc: ad7793: Fix IRQ flagAlexandru Tachici
In Sigma-Delta devices the SDO line is also used as an interrupt. Leaving IRQ on level instead of falling might trigger a sample read when the IRQ is enabled, as the SDO line is already low. Not sure if SDO line will always immediately go high in ad_sd_buffer_postenable before the IRQ is enabled. Also the datasheet seem to explicitly say the falling edge of the SDO should be used as an interrupt: >From the AD7793 datasheet: " The DOUT/RDY falling edge can be used as an interrupt to a processor" Fixes: da4d3d6bb9f6 ("iio: adc: ad-sigma-delta: Allow custom IRQ flags") Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210906065630.16325-4-alexandru.tachici@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-09-14iio: adc: ad7780: Fix IRQ flagAlexandru Tachici
Correct IRQ flag here is falling. In Sigma-Delta devices the SDO line is also used as an interrupt. Leaving IRQ on level instead of falling might trigger a sample read when the IRQ is enabled, as the SDO line is already low. Not sure if SDO line will always immediately go high in ad_sd_buffer_postenable before the IRQ is enabled. Also the datasheet seem to explicitly say the falling edge of the SDO should be used as an interrupt: >From the AD7780 datasheet: " The DOUT/Figure 22 RDY falling edge can be used as an interrupt to a processor" Fixes: da4d3d6bb9f6 ("iio: adc: ad-sigma-delta: Allow custom IRQ flags") Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210906065630.16325-3-alexandru.tachici@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-09-14iio: adc: ad7192: Add IRQ flagAlexandru Tachici
IRQ type in ad_sigma_delta_info struct was missing. In Sigma-Delta devices the SDO line is also used as an interrupt. Leaving IRQ on level instead of falling might trigger a sample read when the IRQ is enabled, as the SDO line is already low. Not sure if SDO line will always immediately go high in ad_sd_buffer_postenable before the IRQ is enabled. Also the datasheet seem to explicitly say the falling edge of the SDO should be used as an interrupt: >From the AD7192 datasheet: "The DOUT/RDY falling edge can be used as an interrupt to a processor," Fixes: da4d3d6bb9f6 ("iio: adc: ad-sigma-delta: Allow custom IRQ flags") Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210906065630.16325-2-alexandru.tachici@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-09-14iio: adc: aspeed: set driver data when adc probe.Billy Tsai
Fix the issue when adc remove will get the null driver data. Fixed: commit 573803234e72 ("iio: Aspeed ADC") Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Link: https://lore.kernel.org/r/20210831071458.2334-2-billy_tsai@aspeedtech.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-09-14iio: adc: rzg2l_adc: add missing clk_disable_unprepare() in ↵Yang Yingliang
rzg2l_adc_pm_runtime_resume() Add clk_disable_unprepare() on error path in rzg2l_adc_pm_runtime_resume(). Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20210819132416.175644-1-yangyingliang@huawei.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-09-14iio: adc: max1027: Fix the number of max1X31 channelsMiquel Raynal
The macro MAX1X29_CHANNELS() already calls MAX1X27_CHANNELS(). Calling MAX1X27_CHANNELS() before MAX1X29_CHANNELS() in the definition of MAX1X31_CHANNELS() declares the first 8 channels twice. So drop this extra call from the MAX1X31 channels list definition. Fixes: 7af5257d8427 ("iio: adc: max1027: Prepare the introduction of different resolutions") Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20210818111139.330636-3-miquel.raynal@bootlin.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-09-14iio: adc: max1027: Fix wrong shift with 12-bit devicesMiquel Raynal
10-bit devices must shift the value twice. This is not needed anymore on 12-bit devices. Fixes: ae47d009b508 ("iio: adc: max1027: Introduce 12-bit devices support") Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20210818111139.330636-2-miquel.raynal@bootlin.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-09-14iio: adc128s052: Fix the error handling path of 'adc128_probe()'Christophe JAILLET
A successful 'regulator_enable()' call should be balanced by a corresponding 'regulator_disable()' call in the error handling path of the probe, as already done in the remove function. Update the error handling path accordingly. Fixes: 913b86468674 ("iio: adc: Add TI ADC128S052") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com> Link: https://lore.kernel.org/r/85189f1cfcf6f5f7b42d8730966f2a074b07b5f5.1629542160.git.christophe.jaillet@wanadoo.fr Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-09-14iio: adc: rzg2l_adc: Fix -EBUSY timeout error returnColin Ian King
Currently when a timeout occurs in rzg2l_adc_hw_init the error -EBUSY is assigned to ret but the error code is used as the function is hard-coded to return 0. The variable ret is 0 before entering the while-loop hence the fix is just to return ret at the end of the function to return the success 0 or -EBUSY return code. Addresses-Coverity: ("Unused value") Fixes: d484c21bacfa ("iio: adc: Add driver for Renesas RZ/G2L A/D converter") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20210817172111.495897-1-colin.king@canonical.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-09-14iio: adc: aspeed: completes the bitfield declare.Billy Tsai
This patch completes the declare of ADC register bitfields and uses the same prefix ASPEED_ADC_* for these bitfields. In addition, tidy up space alignment of the codes. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Link: https://lore.kernel.org/r/20210831071458.2334-4-billy_tsai@aspeedtech.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-09-14iio: adc: ti-ads8344: convert probe to device-managedAlexandru Ardelean
This change converts the driver to register via devm_iio_device_register(). The regulator disable is moved on a devm_add_action_or_reset() hook. And the spi_set_drvdata() isn't required anymore. And finally, the ads8344_remove() can be removed as well. Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com> Link: https://lore.kernel.org/r/20210903073707.46892-1-aardelean@deviqon.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-09-14iio: adc: at91-sama5d2_adc: update copyright and authors informationEugen Hristev
Update copyright and authors information (corrected e-mail address), and add myself as one of the authors. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Link: https://lore.kernel.org/r/20210901123013.329792-9-eugen.hristev@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-09-14iio: adc: at91-sama5d2_adc: add support for sama7g5 deviceEugen Hristev
Add support to sama7g5 ADC which is similar with sama5d2/sam9x60 device. Differences are highlighted by compatible. Main differences include 16 channels instead of 12 and missing resistive touchscreen. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Link: https://lore.kernel.org/r/20210901123013.329792-8-eugen.hristev@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-09-14iio: adc: at91-sama5d2_adc: add helper for COR registerEugen Hristev
Add helper for the COR register. This helper allows to modify the COR register, removes duplicate code and improves readability. The COR offset is now part of the register layout. This will allow different platform with a different offset to use the same helper. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Link: https://lore.kernel.org/r/20210901123013.329792-7-eugen.hristev@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-09-14iio: adc: at91-sama5d2_adc: add support for separate end of conversion registersEugen Hristev
Some platforms have separated the end-of-conversion information from the usual ISR/IMR/IER/IDR registers, into EOC_ISR/EOC_IMR/EOC_IER/EOC_IDR. To cope with both variants, helpers are being added, that will make code more clear and more easy to read. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Link: https://lore.kernel.org/r/20210901123013.329792-6-eugen.hristev@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-09-14iio: adc: at91-sama5d2_adc: convert to platform specific data structuresEugen Hristev
Convert the driver to platform specific structures. This means: - create a register layout struct that will hold offsets for registers - create a platform struct that will hold platform information (number of channels, indexes for different channels and pointer to layout struct) - convert specific macros that are platform dependent into platform variables This step is in fact a no-op, but allows the driver to be more flexible and for future enhancement including adding new platforms that are partly compatible with the current driver and differ slightly in register layout or capabilities for example. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Link: https://lore.kernel.org/r/20210901123013.329792-5-eugen.hristev@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-09-14iio: adc: at91-sama5d2_adc: remove unused definitionEugen Hristev
Remove unused register definition Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Link: https://lore.kernel.org/r/20210901123013.329792-4-eugen.hristev@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-09-14iio: adc: at91-sama5d2_adc: initialize hardware after clock is startedEugen Hristev
The hw_init hardware init call must happen after the clock is prepared and enabled. Otherwise, writing to the registers might lead to a block or external abort. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Link: https://lore.kernel.org/r/20210901123013.329792-3-eugen.hristev@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-09-14iio: adc: twl6030-gpadc: Use the defined variable to clean codeTang Bin
Use the defined variable "dev" to make the code cleaner. Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20210823095921.16828-1-tangbin@cmss.chinamobile.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-09-14iio: adc: ad7949: use devm managed functionsLiam Beguin
Switch to devm_iio_device_register to finalize devm migration. This removes the use for iio_device_unregister() and since mutex_destroy() is not necessary here, remove it altogether. Signed-off-by: Liam Beguin <lvb@xiphos.com> Link: https://lore.kernel.org/r/20210815213309.2847711-6-liambeguin@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-09-14iio: adc: ad7949: add vref selection supportLiam Beguin
Add support for selecting the voltage reference from the devicetree. This change is required to get valid readings with all three vref hardware configurations supported by the ADC. For instance if the ADC isn't provided with an external reference, the sample request must specify an internal voltage reference to get a valid reading. Signed-off-by: Liam Beguin <lvb@xiphos.com> Link: https://lore.kernel.org/r/20210815213309.2847711-4-liambeguin@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-09-14iio: adc: ad7949: enable use with non 14/16-bit controllersLiam Beguin
This driver supports devices with 14-bit and 16-bit sample sizes. This implies different SPI transfer lengths which are not always handled properly by some SPI controllers. To work around this limitation, define a big endian buffer used to split the buffer into two 8-bit messages in the event that the controller doesn't support 14-bit or 16-bit transfers. A separate buffer is introduced here to avoid performing operations on types of different endianness. Since all transfers use the same bits_per_word value, move that logic to the probe function, and let transfers default to the value defined in the struct spi_device. Signed-off-by: Liam Beguin <lvb@xiphos.com> Link: https://lore.kernel.org/r/20210815213309.2847711-3-liambeguin@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-09-14iio: adc: ad7949: define and use bitfield namesLiam Beguin
Replace raw configuration register values by using FIELD_PREP and defines to improve readability. Signed-off-by: Liam Beguin <lvb@xiphos.com> Link: https://lore.kernel.org/r/20210815213309.2847711-2-liambeguin@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-09-01Merge tag 'staging-5.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull IIO and staging driver updates from Greg KH: "Here is the big set of staging and IIO driver updates for 5.15-rc1. Also included in here are the counter driver subsystem updates as the IIO drivers needed them. Lots of churn in some staging drivers, we dropped the "old" rtl8188eu driver and replaced it with a newer version of the driver that had been maintained out-of-tree by Larry with the end goal of actually being able to get this driver out of staging eventually. Despite that driver being "newer" the line count of this pull request is going up. Some drivers moved out of staging as well, which is always nice to see, that is why there are additions to the mfc and misc driver subsystems. All of these were acked by the various subsystem maintainers involved. But by far, as normal, it's coding style cleanups all over the drivers/staging/ tree in here. Full details of these changes are in the shortlog. All of these have been in linux-next for a while with no reported problems" [ Note: the r8188eu merge clashed with commit 89939e890605 ("staging: rtlwifi: use siocdevprivate") from the networking tree. When resolving the issue, I noted that the whole r8188eu rtw_android code is dead since commit ae7471cae00a ("staging: r8188eu: remove rtw_ioctl function"). End result: the merge resolution was to throw all of that away, rather than do the mindless fixup to code that isn't actually reachable - Linus ] * tag 'staging-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (551 commits) staging: vt6655: Remove filenames in files staging: r8188eu: add extra TODO entries staging: vt6656: Remove filenames in files staging: wlan-ng: fix invalid assignment warning staging: r8188eu: rename fields of struct rtl_ps staging: r8188eu: remove ODM_DynamicPrimaryCCA_DupRTS() staging: r8188eu: rename fields of struct dyn_primary_cca staging: r8188eu: rename struct field Wifi_Error_Status staging: r8188eu: Provide a TODO file for this driver staging: r8188eu: remove unneeded variable staging: r8188eu: remove unneeded conversions to bool staging: r8188eu: remove {read,write}_macreg staging: r8188eu: core: remove condition with no effect staging: r8188eu: remove ethernet.h header file staging: r8188eu: remove ip.h header file staging: r8188eu: remove if_ether.h header file staging: r8188eu: make rtw_deinit_intf_priv return void staging: r8188eu: use is_multicast_ether_addr in os_dep/recv_linux.c staging: r8188eu: use is_multicast_ether_addr in hal/rtl8188eu_xmit.c staging: r8188eu: use is_multicast_ether_addr in core/rtw_xmit.c ...
2021-08-30Merge tag 'for-v5.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "Battery/charger related: - cros-peripheral-charger: new driver - mt6360-charger: new driver - simple-battery: support reading chemistry info - max17042-battery: add max77849 support - sbs-battery: add time_to_empty_now support - smb347-charger: prepare USB OTG support - rn5t618: add voltage_now support - axp288: cleanup & optimizations - max17042_battery: cleanups - ab8500: cleanups - misc minor cleanups and DT binding fixes reset related: - tps65086-restart: new driver - linkstation-poweroff: support NETGEAR ReadyNAS Duo v2" * tag 'for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (51 commits) power: supply: core: Fix parsing of battery chemistry/technology power: supply: max17042_battery: log SOC threshold using debug log level power: supply: max17042_battery: more robust chip type checks power: supply: max17042_battery: fix typo in MAx17042_TOFF power: supply: max17042_battery: clean up MAX17055_V_empty power: supply: smb347-charger: Implement USB VBUS regulator power: supply: smb347-charger: Add missing pin control activation power: supply: smb347-charger: Utilize generic regmap caching power: supply: smb347-charger: Make smb347_set_writable() IRQ-safe dt-bindings: power: supply: smb347-charger: Document USB VBUS regulator power: reset: Add TPS65086 restart driver dt-bindings: power: supply: max17042: describe interrupt power: supply: max17042: remove duplicated STATUS bit defines power: supply: max17042: handle fails of reading status register power: supply: core: Parse battery chemistry/technology dt-bindings: power: Extend battery bindings with chemistry power: reset: linkstation-poweroff: add new device power: reset: linkstation-poweroff: prepare for new devices power: supply: bq24735: reorganize ChargeOption command macros power: supply: rn5t618: Add voltage_now property ...
2021-08-17Merge tag 'iio-for-5.15b' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: 2nd set of new IIO device support and cleanups for the 5.15 cycle. A small pull request to pick up a few new drivers and some cleanup and fix patches. New device support * ad5110 non-volatile digital potentiometer - New driver * renesas rzl/gl2 12-bit / 8 channel ADC block - New driver and bindings Minor or late breaking fixes and cleanups * ltc2983 - Fix a false assumption of initial interrupt during probe(). * hp03 - Use devm_* to simplify probe and allow the remove function to be dropped. * rockchip_saradc - Use a regulator notifier to reduce overheads of querying the scale. * tag 'iio-for-5.15b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: adc: Add driver for Renesas RZ/G2L A/D converter dt-bindings: iio: adc: Add binding documentation for Renesas RZ/G2L A/D converter iio: pressure: hp03: update device probe to register with devm functions iio: adc: rockchip_saradc: add voltage notifier so get referenced voltage once at probe iio: ltc2983: fix device probe iio: potentiometer: Add driver support for AD5110 dt-bindings: iio: potentiometer: Add AD5110 in trivial-devices
2021-08-16Merge 5.14-rc6 into staging-nextGreg Kroah-Hartman
We need the IIO fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-15iio: adc: Add driver for Renesas RZ/G2L A/D converterLad Prabhakar
Add ADC driver support for Renesas RZ/G2L A/D converter in SW trigger mode. A/D Converter block is a successive approximation analog-to-digital converter with a 12-bit accuracy and supports a maximum of 8 input channels. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20210804202118.25745-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-15iio: adc: rockchip_saradc: add voltage notifier so get referenced voltage ↵David Wu
once at probe Add voltage notifier, no need to query regulator voltage for every saradc read, just get regulator voltage once at probe. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: Simon Xue <xxm@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20210810011007.54066-1-xxm@rock-chips.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-13iio: adc: rn5t618: Add iio mapAndreas Kemnade
Add iio map to allow power driver to read out values as a consumer. This approach does not block later addition of devicetree support which would be helpful if there is an in-kernel consumer for AIN0/1. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-08-08iio: ep93xx: Prepare clock before using itAlexander Sverdlin
Use clk_prepare_enable()/clk_disable_unprepare() in preparation for switch to Common Clock Framework, otherwise the following is visible: WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:1011 clk_core_enable+0x9c/0xbc Enabling unprepared ep93xx-adc CPU: 0 PID: 1 Comm: swapper Not tainted 5.13.0-rc5-... #1 Hardware name: Cirrus Logic EDB9302 Evaluation Board [<c000d5b0>] (unwind_backtrace) from [<c000c590>] (show_stack+0x10/0x18) [<c000c590>] (show_stack) from [<c03a5f38>] (dump_stack+0x20/0x2c) [<c03a5f38>] (dump_stack) from [<c03a2098>] (__warn+0x98/0xc0) [<c03a2098>] (__warn) from [<c03a2150>] (warn_slowpath_fmt+0x90/0xc0) [<c03a2150>] (warn_slowpath_fmt) from [<c01d8358>] (clk_core_enable+0x9c/0xbc) [<c01d8358>] (clk_core_enable) from [<c01d8698>] (clk_core_enable_lock+0x18/0x30) [<c01d8698>] (clk_core_enable_lock) from [<c0266560>] (ep93xx_adc_probe+0xe4/0x1a0) [<c0266560>] (ep93xx_adc_probe) from [<c02126e0>] (platform_probe+0x34/0x80) [<c02126e0>] (platform_probe) from [<c0210bf8>] (really_probe+0xe8/0x394) [<c0210bf8>] (really_probe) from [<c0211464>] (device_driver_attach+0x5c/0x64) [<c0211464>] (device_driver_attach) from [<c02114e8>] (__driver_attach+0x7c/0xec) [<c02114e8>] (__driver_attach) from [<c020f1b4>] (bus_for_each_dev+0x78/0xc4) [<c020f1b4>] (bus_for_each_dev) from [<c0211570>] (driver_attach+0x18/0x24) [<c0211570>] (driver_attach) from [<c020fab4>] (bus_add_driver+0x140/0x1cc) [<c020fab4>] (bus_add_driver) from [<c0211c44>] (driver_register+0x74/0x114) [<c0211c44>] (driver_register) from [<c02134f8>] (__platform_driver_register+0x18/0x24) [<c02134f8>] (__platform_driver_register) from [<c0470148>] (ep93xx_adc_driver_init+0x10/0x1c) [<c0470148>] (ep93xx_adc_driver_init) from [<c045ce88>] (do_one_initcall+0x7c/0x1a4) [<c045ce88>] (do_one_initcall) from [<c045d184>] (kernel_init_freeable+0x17c/0x1fc) [<c045d184>] (kernel_init_freeable) from [<c03a64d0>] (kernel_init+0x8/0xf8) [<c03a64d0>] (kernel_init) from [<c00082d8>] (ret_from_fork+0x14/0x3c) ... ep93xx-adc ep93xx-adc: Cannot enable clock ep93xx-adc: probe of ep93xx-adc failed with error -108 Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Link: https://lore.kernel.org/r/20210613233041.128961-2-alexander.sverdlin@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-08-08iio: adc: fsl-imx25-gcq: adjust irq check to match docs and simplify codeTang Bin
For the function of platform_get_irq(), the example in platform.c is * int irq = platform_get_irq(pdev, 0); * if (irq < 0) * return irq; the return value of zero is unnecessary to check, so make the right check and simplify code. Note that platform_get_irq() is documented as never returning 0 so this is a minor optmization rather than a fix. Co-developed-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20210802120929.33760-1-tangbin@cmss.chinamobile.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-07-31iio/adc: ingenic: add JZ4760B support to the sadc driverChristophe Branchereau
The JZ4760B variant differs slightly from the JZ4760: it has a bit called VBAT_SEL in the CFG register. In order to correctly sample the battery voltage on existing handhelds using this SOC, the bit must be cleared. We leave the possibility to set the bit, by using the "ingenic,use-internal-divider" in the devicetree. Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com> Link: https://lore.kernel.org/r/20210726082033.351533-5-cbranchereau@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-07-31iio/adc: ingenic: add JZ4760 support to the sadc driverChristophe Branchereau
The jz4760 sadc is very similar to the jz4770 one, but has a VREF of 2.5V and 3 aux channels. modify ingenic_adc_read_chan_info_raw() needs a change to account for it. Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20210726082033.351533-4-cbranchereau@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-07-31iio/adc: ingenic: rename has_aux2 to has_aux_mdChristophe Branchereau
The jz4760(b) socs have 3 aux channels. The purpose of has_aux2 is to set the MD bits used to select the AUX channel to be sampled, not to describe the hardware. Rename it to a more appropriate name. Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20210726082033.351533-2-cbranchereau@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-07-31iio: adc: Fix incorrect exit of for-loopColin Ian King
Currently the for-loop that scans for the optimial adc_period iterates through all the possible adc_period levels because the exit logic in the loop is inverted. I believe the comparison should be swapped and the continue replaced with a break to exit the loop at the correct point. Addresses-Coverity: ("Continue has no effect") Fixes: e08e19c331fb ("iio:adc: add iio driver for Palmas (twl6035/7) gpadc") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210730071651.17394-1-colin.king@canonical.com Cc: <stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-07-25iio: adc: meson-saradc: Fix indentation of arguments after a line-breakMartin Blumenstingl
Align the function arguments after a line-break with the opening parenthesis on the previous line. No functional changes intended. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20210717233718.332267-4-martin.blumenstingl@googlemail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-07-25iio: adc: meson-saradc: Add missing space between if and parenthesisMartin Blumenstingl
Add a missing space between if and the opening parenthesis to make the coding style consistent across the whole driver. No functional changes intended. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20210717233718.332267-3-martin.blumenstingl@googlemail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
generated by cgit (git 2.34.1) at 2025-09-22 11:10:34 +0000