summaryrefslogtreecommitdiff
path: root/drivers/iio/adc
AgeCommit message (Collapse)Author
2022-08-15iio: adc: at91-sama5d2_adc: move oversampling storage in its functionClaudiu Beznea
Move the storage of oversampling_ratio in at91_adc_config_emr(). This prepares for the next commits. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220803102855.2191070-13-claudiu.beznea@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15iio: adc: at91-sama5d2_adc: add 64 and 256 oversampling ratioClaudiu Beznea
Add 64 and 256 oversampling ratio support. It is necessary for temperature sensor. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220803102855.2191070-12-claudiu.beznea@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15iio: adc: at91-sama5d2_adc: adjust osr based on specific platform dataClaudiu Beznea
ADC captures data on 12 bits (if oversampling is not enabled). When using oversampling captured data could go up to 14 bits for SAMA5D2 or up to 16 bits for SAMA7G5 (depending on oversampling settings). All the channels that are subject of oversampling are registered as 14 or 16 real bits. Depending on the oversampling settings the ADC converted value need to be shifted up to 14 or 16 to cope with realbits value registered to IIO subsystem. Commit adds platform specific information to know if we run on a system with up to 14 or 16 bits ADC converted data. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220803102855.2191070-11-claudiu.beznea@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15iio: adc: at91-sama5d2_adc: add .read_avail() chan_info opsClaudiu Beznea
Add .read_avail() to chan_info ops which will retrieve the available oversampling ratio. Suggested-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220803102855.2191070-10-claudiu.beznea@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15iio: adc: at91-sama5d2_adc: drop AT91_OSR_XSAMPLES definesClaudiu Beznea
Drop AT91_OSR_1SAMPLES, AT91_OSR_4SAMPLES, AT91_OSR_16SAMPLES defines and insted use their values inline. Suggested-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220803102855.2191070-9-claudiu.beznea@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15iio: adc: at91-sama5d2_adc: move the check of oversampling in its functionClaudiu Beznea
Oversampling values are checked anyway in at91_adc_emr_config(). Remove the checking of these from at91_adc_write_raw() and return -EINVAL instead in at91_adc_emr_config(). Suggested-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220803102855.2191070-8-claudiu.beznea@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15iio: adc: at91-sama5d2_adc: handle different EMR.OSR for different hw versionsClaudiu Beznea
SAMA7G5 introduces 64 and 256 oversampling rates. Due to this EMR.OSR is 3 bits long. Change the code to reflect this. Commit prepares the code for the addition of 64 and 256 oversampling rates. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220803102855.2191070-7-claudiu.beznea@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15iio: adc: at91-sama5d2_adc: exit from write_raw() when buffers are enabledClaudiu Beznea
When buffers are enabled conversion may start asynchronously thus allowing changes on actual hardware could lead to bad behavior. Thus do not allow changing oversampling ratio and sample frequency when if iio_device_claim_direct_mode() returns with error. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220803102855.2191070-6-claudiu.beznea@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15iio: adc: at91-sama5d2_adc: disable/prepare buffer on suspend/resumeClaudiu Beznea
In case triggered buffers are enabled while system is suspended they will not work anymore after resume. For this call at91_adc_buffer_postdisable() on suspend and at91_adc_buffer_prepare() on resume. On tests it has been seen that at91_adc_buffer_postdisable() call is not necessary but it has been kept because it also does the book keeping for DMA. On resume path there is no need to call at91_adc_configure_touch() as it is embedded in at91_adc_buffer_prepare(). Fixes: 073c662017f2f ("iio: adc: at91-sama5d2_adc: add support for DMA") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220803102855.2191070-5-claudiu.beznea@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15iio: adc: at91-sama5d2_adc: lock around oversampling and sample freqClaudiu Beznea
.read_raw()/.write_raw() could be called asynchronously from user space or other in kernel drivers. Without locking on st->lock these could be called asynchronously while there is a conversion in progress. Read will be harmless but changing registers while conversion is in progress may lead to inconsistent results. Thus, to avoid this lock st->lock. Fixes: 27e177190891 ("iio:adc:at91_adc8xx: introduce new atmel adc driver") Fixes: 6794e23fa3fe ("iio: adc: at91-sama5d2_adc: add support for oversampling resolution") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220803102855.2191070-4-claudiu.beznea@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15iio: adc: at91-sama5d2_adc: check return status for pressure and touchClaudiu Beznea
Check return status of at91_adc_read_position() and at91_adc_read_pressure() in at91_adc_read_info_raw(). Fixes: 6794e23fa3fe ("iio: adc: at91-sama5d2_adc: add support for oversampling resolution") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220803102855.2191070-3-claudiu.beznea@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15iio: adc: at91-sama5d2_adc: fix AT91_SAMA5D2_MR_TRACKTIM_MAXClaudiu Beznea
All ADC HW versions handled by this driver (SAMA5D2, SAM9X60, SAMA7G5) have MR.TRACKTIM on 4 bits. Fix AT91_SAMA5D2_MR_TRACKTIM_MAX to reflect this. Fixes: 27e177190891 ("iio:adc:at91_adc8xx: introduce new atmel adc driver") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220803102855.2191070-2-claudiu.beznea@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15iio: adc: Add rtq6056 supportChiYuan Huang
Add Richtek rtq6056 supporting. It can be used for the system to monitor load current and power with 16-bit resolution. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/1658242365-27797-3-git-send-email-u0084500@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15iio: adc: imx8qxp-adc: propagate regulator_get_voltage errorMartin Larsson
If the ADC vref regulator returns an error, for example, if CONFIG_REGULATOR is not set, the error will be used as a reference voltage. Introduce a guard for negative return values instead of unconditionally casting it to u32. Acked-by: Haibo Chen <haibo.chen@nxp.com> Signed-off-by: Martin Larsson <martin.larsson@actia.se> Reviewed-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20220720153136.3502440-1-martin.larsson@actia.se Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-07-19iio: adc: max1027: unlock on error path in max1027_read_single_value()Dan Carpenter
If max1027_wait_eoc() fails then call iio_device_release_direct_mode() before returning. Fixes: a0e831653ef9 ("iio: adc: max1027: Introduce an end of conversion helper") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YsbztVuAXnau2cIZ@kili Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-07-18iio: adc: imx8qxp: Switch to DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()Jonathan Cameron
Switching to these newer macros allows the compiler to remove the unused functions and struct dev_pm_ops if !CONFIG_PM without the need to mark anything __maybe_unused. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Cai Huoqing <cai.huoqing@linux.dev> Reviewed-by: Haibo Chen <haibo.chen@nxp.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20220621202719.13644-28-jic23@kernel.org
2022-07-18iio: adc: xilinx-ams: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron
Using these newer macros allows the compiler to remove the unused structure and functions when !CONFIG_PM_SLEEP + removes the need to mark pm functions __maybe_unused. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20220621202719.13644-10-jic23@kernel.org
2022-07-18iio: adc: ti-am335x: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron
Using these newer macros allows the compiler to remove the unused structure and functions when !CONFIG_PM_SLEEP + removes the need to mark pm functions __maybe_unused. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20220621202719.13644-9-jic23@kernel.org
2022-07-18iio: adc: stmpe-adc: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron
Using these newer macros allows the compiler to remove the unused structure and functions when !CONFIG_PM_SLEEP + removes the need to mark pm functions __maybe_unused. This one is a little unusual as no suspend callback, but the cleanup is still worthwhile (and eventual aim is to get rid of old macro). Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20220621202719.13644-8-jic23@kernel.org
2022-07-18iio: adc: mt6577_auxadc: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron
Using these newer macros allows the compiler to remove the unused structure and functions when !CONFIG_PM_SLEEP + removes the need to mark pm functions __maybe_unused. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Zhiyong Tao <zhiyong.tao@mediatek.com> Cc: Hui Liu <hui.liu@mediatek.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20220621202719.13644-7-jic23@kernel.org
2022-07-18iio: adc: meson_saradc: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron
Using these newer macros allows the compiler to remove the unused structure and functions when !CONFIG_PM_SLEEP + removes the need to mark pm functions __maybe_unused. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20220621202719.13644-6-jic23@kernel.org
2022-07-18iio: adc: imx7d_adc: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron
In this case we only gain the ability to have the compiler drop the struct dev_pm_ops because the callbacks are called from paths other than suspend and resume. In general the purpose of this new macro is to allow automated removal of the callbacks as well, but that doesn't apply here. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Haibo Chen <haibo.chen@nxp.com> Reviewed-by: Haibo Chen <haibo.chen@nxp.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20220621202719.13644-5-jic23@kernel.org
2022-07-18iio: adc: at91-sam5d2: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron
Using these newer macros allows the compiler to remove the unused structure and functions when !CONFIG_PM_SLEEP + removes the need to mark pm functions __maybe_unused. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20220621202719.13644-4-jic23@kernel.org
2022-07-18iio: adc: ad799x: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron
Using these newer macros allows the compiler to remove the unused structure and functions when !CONFIG_PM_SLEEP + removes the need to mark pm functions __maybe_unused. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20220621202719.13644-3-jic23@kernel.org
2022-07-18iio: adc: ti-ads124s08: Drop unused parameter to ads124s_read()Jonathan Cameron
The channel number is never used in this call, so don't pass it in. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20220626153828.589664-1-jic23@kernel.org
2022-07-18iio: adc: npcm: Add NPCM8XX supportTomer Maimon
Adding ADC NPCM8XX support to NPCM ADC driver. ADC NPCM8XX uses a different resolution and voltage reference. As part of adding NPCM8XX support: - Add NPCM8XX specific compatible string. - Add data to handle architecture-specific ADC parameters. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Link: https://lore.kernel.org/r/20220713132640.215916-3-tmaimon77@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-07-16iio: adc: ad7949: Fix error messageThorsten Scherer
Signed-off-by: Thorsten Scherer <t.scherer@eckelmann.de> Reviewed-by: Liam Beguin <liambeguin@gmail.com> Link: https://lore.kernel.org/r/20220708201720.16523-1-t.scherer@eckelmann.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-07-16iio: adc: stx104: Implement and utilize register structuresWilliam Breathitt Gray
Reduce magic numbers and improve code readability by implementing and utilizing named register data structures. Tested-by: Fred Eckert <Frede@cmslaser.com> Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Link: https://lore.kernel.org/r/8cb91d5b53e57b066120e42ea07000d6c7ef5543.1657213745.git.william.gray@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-07-14Merge tag 'iio-for-5.20a' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: IIO new device support, features and minor fixes for 5.20 Several on-running cleanup efforts dominate this time, plus the DMA safety alignment issue identified due to improved understanding of the restrictions as a result of Catalin Marinas' efforts in that area. One immutable branch in here due to MFD and SPMI elements needed for the qcom-rradc driver. Device support * bmi088 - Add support for bmi085 (accelerometer part of IMU) - Add support for bmi090l (accelerometer part of IMU) * mcp4922 - Add support for single channel device MCP4921 * rzg2l-adc - Add compatible and minor tweaks to support RZ/G2UL ADC * sca3300 - Add support for scl3300 including refactoring driver to support multiple device types and cleanup noticed whilst working on driver. * spmi-rradc - New driver for Qualcomm SPMI Round Robin ADC including necessary additional utility functions in SPMI core and related MFD driver. * ti-dac55781 - Add compatible for DAC121C081 which is very similar to existing parts. Features * core - Warn on iio_trigger_get() on an unregistered IIO trigger. * bma400 - Triggered buffer support - Activity and step counting - Misc driver improvements such as devm and header ordering * cm32181 - Add PM support. * cros_ec - Sensor location support * sx9324 - Add precharge resistor setting - Add internal compensation resistor setting - Add CS idle/sleep mode. * sx9360 - Add precharge resistor setting * vl53l0x - Handle reset GPIO, regulator and relax handling of irq type. Cleanup and minor fixes: Treewide changes - Cleanup of error handling in remove functions in many drivers. - Update dt-binding maintainers for a number of ADI bindings. - Several sets of conversion of drivers from device tree specific to generic device properties. Includes fixing up various related header and Kconfig issues. - Drop include of of.h from iio.h and fix up drivers that need to include it directly. - More moves of clusters of drivers into appropriate IIO_XXX namespaces. - Tree wide fix of a long running bug around DMA safety requirements. IIO was using __cacheline_aligned to pad iio_priv() structures. This worked for a long time by coincidence, but correct alignment is ARCH_KMALLOC_MINALIGN. As there is activity around this area, introduce an IIO local IIO_DMA_MINALIGN to allow for changing it in one place rather than every driver in future. Note, there have been no reports of this bug in the wild, and it may not happen on any platforms supported by upstream, so no rush to backport these fixes. Other cleanup * core - Switch to ida_alloc()/free() - Drop unused iio_get_time_res() - Octal permissions and DEVICE_ATTR_* macros. - Cleanup bared unsigned usage. * MAINTAINERS - Add include/dt-bindings/iio/ to the main IIO entry. * ad5380 - Comment syntax fix. * ad74413r - Call to for_each_set_bit_from(), with from value as 0 replaced. * ad7768-1 - Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core. * adxl345 - Fix wrong address in dt-binding example. * adxl367 - Drop extra update of FIFO watermark. * at91-sama5d2 - Limit requested watermark to the hwfifo size. * bmg160, bme680 - Typos * cio-dac - Switch to iomap rather than direct use of ioports * kxsd9 - Replace CONFIG_PM guards with new PM macros that let the compiler cleanly remove the unused code and structures when !CONFIG_PM * lsm6dsx - Use new pm_sleep_ptr() and EXPORT_SIMPLE_DEV_PM_OPS(). Then move to Namespace. * meson_saradc - general cleanup. - Avoid attaching resources to iio_dev->dev - Use same struct device for all error messages - Convert to dev_err_probe() and use local struct device *dev to reduce code complexity. - Use devm_clk_get_optional() instead of hand rolling. - Use regmap_read_poll_timeout() instead of hand rolling. * mma7660 - Drop ACPI_PTR() use that is unhelpful. * mpu3050 - Stop exporting symbols not used outside of module - Switch to new DEFINE_RUNTIME_DEV_PM_OPS() macro and move to Namespace. * ping - Typo fix * qcom-spmi-rradc - Typo fix * sc27xx - Convert to generic struct u32_fract * srf08 - Drop a redundant check on !val * st_lsm6dsx - Limit the requested watermark to the hwfifo size. * stm32-adc - Use generic_handle_domain_irq() instead of opencoding. - Fix handling of ADC disable. * stm32-dac - Use str_enabled_disable() instead of open coding. * stx104 - Switch to iomap rather than direct use of ioports * tsc2046 - Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core. * tsl2563 - Replace flush_scheduled_work() with cancel_delayed_work_sync() - Replace cancel_delayed_work() with cancel_delayed_work_sync() * vl53l0x - Make the VDD regulator optional by allowing a dummy regulator. * tag 'iio-for-5.20a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (244 commits) iio: adc: xilinx-xadc: Drop duplicate NULL check in xadc_parse_dt() iio: adc: xilinx-xadc: Make use of device properties iio: light: cm32181: Add PM support iio: adc: ad778-1: do not explicity set INDIO_BUFFER_TRIGGERED mode iio: adc: ti-tsc2046: do not explicity set INDIO_BUFFER_TRIGGERED mode iio: adc: stm32-adc: disable adc before calibration iio: adc: stm32-adc: make safe adc disable iio: dac: ad5380: align '*' each line and drop unneeded blank line iio: adc: qcom-spmi-rradc: Fix spelling mistake "coherrency" -> "coherency" iio: Don't use bare "unsigned" dt-bindings: iio: dac: mcp4922: expand for mcp4921 support iio: dac: mcp4922: add support to mcp4921 iio: chemical: sps30: Move symbol exports into IIO_SPS30 namespace iio: pressure: bmp280: Move symbol exports to IIO_BMP280 namespace iio: imu: bmi160: Move exported symbols to IIO_BMI160 namespace iio: adc: stm32-adc: Use generic_handle_domain_irq() proximity: vl53l0x: Make VDD regulator actually optional MAINTAINERS: add include/dt-bindings/iio to IIO SUBSYSTEM AND DRIVERS dt-bindings: iio/accel: Fix adi,adxl345/6 example I2C address iio: gyro: bmg160: Fix typo in comment ...
2022-07-13iio: adc: xilinx-xadc: Drop duplicate NULL check in xadc_parse_dt()Andy Shevchenko
The fwnode_for_each_child_node() is NULL-aware, no need to check its parameters outside. Drop duplicate NULL check in xadc_parse_dt(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220531141118.64540-2-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-07-13iio: adc: xilinx-xadc: Make use of device propertiesAndy Shevchenko
Convert the module to be property provider agnostic and allow it to be used on non-OF platforms. Add mod_devicetable.h include. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/20220531141118.64540-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-07-01iio: adc: ad778-1: do not explicity set INDIO_BUFFER_TRIGGERED modeMarcus Folkesson
The core sets INDIO_BUFFER_TRIGGERED as part of devm_iio_triggered_buffer_setup(). Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Link: https://lore.kernel.org/r/20220629203847.4801-1-marcus.folkesson@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-07-01iio: adc: ti-tsc2046: do not explicity set INDIO_BUFFER_TRIGGERED modeMarcus Folkesson
The core sets INDIO_BUFFER_TRIGGERED as part of devm_iio_triggered_buffer_setup(). Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20220629203910.4836-1-marcus.folkesson@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-07-01iio: adc: stm32-adc: disable adc before calibrationOlivier Moysan
The calibration is launched from prepare callback. The ADC state when entering this function may be unknown as the ADC may have been left enabled by boot stage. One prerequisite for ADC calibration is to have ADC in disabled state. If the calibration is started when ADC is still enabled, the behavior is unpredictable, and the calibration may fail with a timeout error. Force ADC to disabled state in stm32h7_adc_selfcalib(). ADC enabling is ensured by stm32h7_adc_enable() call, before leaving prepare callback. Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20220620154738.801706-3-olivier.moysan@foss.st.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-07-01iio: adc: stm32-adc: make safe adc disableOlivier Moysan
From ADC reference manual the software is allowed to write the control bit ADDIS of the ADC_CR register only if the ADC is enabled. Return immediately from stm32h7_adc_disable() if ADC is already disabled. Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20220620154738.801706-2-olivier.moysan@foss.st.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-07-01iio: adc: qcom-spmi-rradc: Fix spelling mistake "coherrency" -> "coherency"Colin Ian King
There is a spelling mistake in a dev_err message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20220621094736.90436-1-colin.i.king@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-20Merge tag 'iio-fixes-for-5.19a' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: 1st set of IIO fixes for the 5.19 cycle. Most of these have been in next for a long time. Unfortunately there was one stray patch in the branch (wasn't a fix), so I've just rebased to remove that. * testing - Fix a missing MODULE_LICENSE() warning by restricting possible build configs. * Various drivers - Fix ordering of iio_get_trigger() being called before iio_trigger_register() * adi,admv1014 - Fix dubious x & !y warning. * adi,axi-adc - Fix missing of_node_put() in error and normal paths. * aspeed,adc - Add missing of_node_put() * fsl,mma8452 - Fix broken probing from device tree. - Drop check on return value of i2c write to device to cause reset as ACK will be missing (device reset before sending it). * fsl,vf610 - Fix documentation of in_conversion_mode ABI. * iio-trig-sysfs - Ensure irq work has finished before freeing the trigger. * invensense,mpu3050 - Disable regulators in error path. * invensense,icm42600 - Fix collision of enum value of 0 with error path where 0 is no match. * renesas,rzg2l_Adc - Add missing fwnode_handle_put() in error path. * rescale - Fix a boolean logic bug for detection of raw + scale affecting an obscure corner case. * semtech,sx9324 - Check return value of read of pin_defs * st,stm32-adc: - Fix interaction across ADC instances for some supported devices. - Drop false spurious IRQ messages. - Fix calibration value handling. If we can't calibrate don't expose the vref_int channel. - Fix maximum clock rate for stm32pm15x * ti,ads131e08 - Add missing fwnode_handle_put() in error paths. * xilinx,ams - Fix variable checked for error from platform_get_irq() * x-powers,axp288 - Overide TS_PIN bias current for boards where it is not correctly initialized. * yamaha,yas530 - Fix inverted check on calibration data being all zeros. * tag 'iio-fixes-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (26 commits) iio:proximity:sx9324: Check ret value of device_property_read_u32_array() iio: accel: mma8452: ignore the return value of reset operation iio: adc: stm32: fix maximum clock rate for stm32mp15x iio: adc: stm32: fix vrefint wrong calibration value handling iio: imu: inv_icm42600: Fix broken icm42600 (chip id 0 value) iio: adc: vf610: fix conversion mode sysfs node name iio: adc: adi-axi-adc: Fix refcount leak in adi_axi_adc_attach_client iio: test: fix missing MODULE_LICENSE for IIO_RESCALE=m iio:humidity:hts221: rearrange iio trigger get and register iio:chemical:ccs811: rearrange iio trigger get and register iio:accel:mxc4005: rearrange iio trigger get and register iio:accel:kxcjk-1013: rearrange iio trigger get and register iio:accel:bma180: rearrange iio trigger get and register iio: afe: rescale: Fix boolean logic bug iio: adc: aspeed: Fix refcount leak in aspeed_adc_set_trim_data iio: adc: stm32: Fix IRQs on STM32F4 by removing custom spurious IRQs message iio: adc: stm32: Fix ADCs iteration in irq handler iio: adc: ti-ads131e08: add missing fwnode_handle_put() in ads131e08_alloc_channels() iio: adc: rzg2l_adc: add missing fwnode_handle_put() in rzg2l_adc_parse_properties() iio: trigger: sysfs: fix use-after-free on remove ...
2022-06-19iio: adc: stm32: fix maximum clock rate for stm32mp15xOlivier Moysan
Change maximum STM32 ADC input clock rate to 36MHz, as specified in STM32MP15x datasheets. Fixes: d58c67d1d851 ("iio: adc: stm32-adc: add support for STM32MP1") Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20220609095234.375925-1-olivier.moysan@foss.st.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-19iio: adc: stm32: fix vrefint wrong calibration value handlingOlivier Moysan
If the vrefint calibration is zero, the vrefint channel output value cannot be computed. Currently, in such case, the raw conversion value is returned, which is not relevant. Do not expose the vrefint channel when the output value cannot be computed, instead. Fixes: 0e346b2cfa85 ("iio: adc: stm32-adc: add vrefint calibration support") Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20220609095856.376961-1-olivier.moysan@foss.st.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-19iio: adc: adi-axi-adc: Fix refcount leak in adi_axi_adc_attach_clientMiaoqian Lin
of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: ef04070692a2 ("iio: adc: adi-axi-adc: add support for AXI ADC IP core") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220524074517.45268-1-linmq006@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-19iio: adc: aspeed: Fix refcount leak in aspeed_adc_set_trim_dataMiaoqian Lin
of_find_node_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak. Fixes: d0a4c17b4073 ("iio: adc: aspeed: Get and set trimming data.") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220516075206.34580-1-linmq006@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-19iio: adc: stm32: Fix IRQs on STM32F4 by removing custom spurious IRQs messageYannick Brosseau
The check for spurious IRQs introduced in 695e2f5c289bb assumed that the bits in the control and status registers are aligned. This is true for the H7 and MP1 version, but not the F4. The interrupt was then never handled on the F4. Instead of increasing the complexity of the comparison and check each bit specifically, we remove this check completely and rely on the generic handler for spurious IRQs. Fixes: 695e2f5c289b ("iio: adc: stm32-adc: fix a regression when using dma and irq") Signed-off-by: Yannick Brosseau <yannick.brosseau@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20220516203939.3498673-3-yannick.brosseau@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-19iio: adc: stm32: Fix ADCs iteration in irq handlerYannick Brosseau
The irq handler was only checking the mask for the first ADCs in the case of the F4 and H7 generation, since it was iterating up to the num_irq value. This patch add the maximum number of ADC in the common register, which map to the number of entries of eoc_msk and ovr_msk in stm32_adc_common_regs. This allow the handler to check all ADCs in that module. Tested on a STM32F429NIH6. Fixes: 695e2f5c289b ("iio: adc: stm32-adc: fix a regression when using dma and irq") Signed-off-by: Yannick Brosseau <yannick.brosseau@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20220516203939.3498673-2-yannick.brosseau@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-19iio: adc: ti-ads131e08: add missing fwnode_handle_put() in ↵Jialin Zhang
ads131e08_alloc_channels() fwnode_handle_put() should be used when terminating device_for_each_child_node() iteration with break or return to prevent stale device node references from being left behind. Fixes: d935eddd2799 ("iio: adc: Add driver for Texas Instruments ADS131E0x ADC family") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Link: https://lore.kernel.org/r/20220517033020.2033324-1-zhangjialin11@huawei.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-19iio: adc: rzg2l_adc: add missing fwnode_handle_put() in ↵Jialin Zhang
rzg2l_adc_parse_properties() fwnode_handle_put() should be used when terminating device_for_each_child_node() iteration with break or return to prevent stale device node references from being left behind. Fixes: d484c21bacfa ("iio: adc: Add driver for Renesas RZ/G2L A/D converter") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220517033526.2035735-1-zhangjialin11@huawei.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-19iio: adc: stm32-adc: Use generic_handle_domain_irq()Sebastian Andrzej Siewior
The call chain generic_handle_irq(irq_find_mapping(domain, x)); could be replaced with generic_handle_domain_irq(domain, x); which looks up the struct irq_desc for the interrupt and handles it with handle_irq_desc(). This is a slight optimisation given that the driver invokes only one function and the struct irq_desc is used directly instead being looked up via irq_to_desc(). Use generic_handle_domain_irq(). Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lore.kernel.org/r/YnuYoQIzJoFIyEJY@linutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-18Merge branch 'immutable-qcom-spmi-rradc' into togregJonathan Cameron
Immutable branch used to allow changes to SPMI and MFD subsystems needed by this driver to be pulled into those trees as well if relevant.
2022-06-18iio: adc: qcom-spmi-rradc: introduce round robin adcCaleb Connolly
The Round Robin ADC is responsible for reading data about the rate of charge from the USB or DC input ports, it can also read the battery ID (resistence), skin temperature and the die temperature of the pmic. It is found on the PMI8998 and PM660 Qualcomm PMICs. Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> Link: https://lore.kernel.org/r/20220429220904.137297-6-caleb.connolly@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-15iio: adc: meson_saradc: Use regmap_read_poll_timeout() for busy waitAndy Shevchenko
Simplify busy wait stages by using regmap_read_poll_timeout(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> # GXM VIM2 Link: https://lore.kernel.org/r/20220603100004.70336-6-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-15iio: adc: meson_saradc: Use temporary variable for struct deviceAndy Shevchenko
Use temporary variable for struct device to make code neater. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20220603100004.70336-5-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
generated by cgit (git 2.34.1) at 2025-09-16 22:23:01 +0000