summaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw
AgeCommit message (Collapse)Author
2018-11-21Merge branch 'mlx5-next' into rdma.gitJason Gunthorpe
From git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux mlx5 updates taken for dependencies on later ODP patches. Conflict resolved by deleting mlx5_ib_get_vector_affinity() * branch 'mlx5-next': (21 commits) net/mlx5: EQ, Make EQE access methods inline {net,IB}/mlx5: Move Page fault EQ and ODP logic to RDMA net/mlx5: EQ, Generic EQ net/mlx5: EQ, Different EQ types net/mlx5: EQ, Privatize eq_table and friends net/mlx5: EQ, irq_info and rmap belong to eq_table net/mlx5: EQ, Create all EQs in one place net/mlx5: EQ, Move all EQ logic to eq.c net/mlx5: EQ, Remove redundant completion EQ list lock net/mlx5: EQ, No need to store eq index as a field net/mlx5: EQ, Remove unused fields and structures net/mlx5: EQ, Use the right place to store/read IRQ affinity hint IB/mlx5: Improve ODP debugging messages net/mlx5: Use multi threaded workqueue for page fault handling net/mlx5: Return success for PAGE_FAULT_RESUME in internal error state IB/mlx5: Lock QP during page fault handling net/mlx5: Enumerate page fault types net/mlx5: Add interface to hold and release core resources net/mlx5: Release resource on error flow net/mlx5: Fix offsets of ifc reserved fields ... Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-11-21IB/mlx5: Allow modify AV in DCI QP to RTRArtemy Kovalyov
This is required so the user can set the SL on the DC QP. Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com> Reviewed-by: Yossi Itigin <yosefe@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-11-21IB/mlx5: Avoid load failure due to unknown link widthMichael Guralnik
If the firmware reports a connection width that is not 1x, 4x, 8x or 12x it causes the driver to fail during initialization. To prevent this failure every time a new width is introduced to the RDMA stack, we will set a default 4x width for these widths which ar unknown to the driver. This is needed to allow to run old kernels with new firmware. Cc: <stable@vger.kernel.org> # 4.1 Fixes: 1b5daf11b015 ("IB/mlx5: Avoid using the MAD_IFC command under ISSI > 0 mode") Signed-off-by: Michael Guralnik <michaelgur@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-11-21IB/mlx5: Fix XRC QP support after introducing extended atomicYonatan Cohen
Extended atomics are supported with RC and XRC QP types, but the commit citied in the Fixes line added an unneeded check to to_mlx5_access_flags. This broke XRC QPs. The following ib_atomic_bw invocation over XRC reproduces the issue: ib_atomic_bw -d mlx5_1 --connection=XRC --atomic_type=FETCH_AND_ADD It is safe to remove such checks because the QP type was already checked in ib_modify_qp_is_ok(), which was previously called from mlx5_ib_modify_qp. Fixes: a60109dc9a95 ("IB/mlx5: Add support for extended atomic operations") Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-11-21RDMA/bnxt_re: Avoid accessing the device structure after it is freedSelvin Xavier
When bnxt_re_ib_reg returns failure, the device structure gets freed. Driver tries to access the device pointer after it is freed. [ 4871.034744] Failed to register with netedev: 0xffffffa1 [ 4871.034765] infiniband (null): Failed to register with IB: 0xffffffea [ 4871.046430] ================================================================== [ 4871.046437] BUG: KASAN: use-after-free in bnxt_re_task+0x63/0x180 [bnxt_re] [ 4871.046439] Write of size 4 at addr ffff880fa8406f48 by task kworker/u48:2/17813 [ 4871.046443] CPU: 20 PID: 17813 Comm: kworker/u48:2 Kdump: loaded Tainted: G B OE 4.20.0-rc1+ #42 [ 4871.046444] Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 1.0.4 08/28/2014 [ 4871.046447] Workqueue: bnxt_re bnxt_re_task [bnxt_re] [ 4871.046449] Call Trace: [ 4871.046454] dump_stack+0x91/0xeb [ 4871.046458] print_address_description+0x6a/0x2a0 [ 4871.046461] kasan_report+0x176/0x2d0 [ 4871.046463] ? bnxt_re_task+0x63/0x180 [bnxt_re] [ 4871.046466] bnxt_re_task+0x63/0x180 [bnxt_re] [ 4871.046470] process_one_work+0x216/0x5b0 [ 4871.046471] ? process_one_work+0x189/0x5b0 [ 4871.046475] worker_thread+0x4e/0x3d0 [ 4871.046479] kthread+0x10e/0x140 [ 4871.046480] ? process_one_work+0x5b0/0x5b0 [ 4871.046482] ? kthread_stop+0x220/0x220 [ 4871.046486] ret_from_fork+0x3a/0x50 [ 4871.046492] The buggy address belongs to the page: [ 4871.046494] page:ffffea003ea10180 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 4871.046495] flags: 0x57ffffc0000000() [ 4871.046498] raw: 0057ffffc0000000 0000000000000000 ffffea003ea10188 0000000000000000 [ 4871.046500] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 4871.046501] page dumped because: kasan: bad access detected Avoid accessing the device structure once it is freed. Fixes: 497158aa5f52 ("RDMA/bnxt_re: Fix the ib_reg failure cleanup") Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-11-21RDMA/bnxt_re: Fix system hang when registration with L2 driver failsSelvin Xavier
Driver doesn't release rtnl lock if registration with L2 driver (bnxt_re_register_netdev) fais and this causes hang while requesting for the next lock. [ 371.635416] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 371.635417] kworker/u48:1 D 0 634 2 0x80000000 [ 371.635423] Workqueue: bnxt_re bnxt_re_task [bnxt_re] [ 371.635424] Call Trace: [ 371.635426] ? __schedule+0x36b/0xbd0 [ 371.635429] schedule+0x39/0x90 [ 371.635430] schedule_preempt_disabled+0x11/0x20 [ 371.635431] __mutex_lock+0x45b/0x9c0 [ 371.635433] ? __mutex_lock+0x16d/0x9c0 [ 371.635435] ? bnxt_re_ib_reg+0x2b/0xb30 [bnxt_re] [ 371.635438] ? wake_up_klogd+0x37/0x40 [ 371.635442] bnxt_re_ib_reg+0x2b/0xb30 [bnxt_re] [ 371.635447] bnxt_re_task+0xfd/0x180 [bnxt_re] [ 371.635449] process_one_work+0x216/0x5b0 [ 371.635450] ? process_one_work+0x189/0x5b0 [ 371.635453] worker_thread+0x4e/0x3d0 [ 371.635455] kthread+0x10e/0x140 [ 371.635456] ? process_one_work+0x5b0/0x5b0 [ 371.635458] ? kthread_stop+0x220/0x220 [ 371.635460] ret_from_fork+0x3a/0x50 [ 371.635477] INFO: task NetworkManager:1228 blocked for more than 120 seconds. [ 371.635478] Tainted: G B OE 4.20.0-rc1+ #42 [ 371.635479] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Release the rtnl_lock correctly in the failure path. Fixes: de5c95d0f518 ("RDMA/bnxt_re: Fix system crash during RDMA resource initialization") Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-11-21RDMA/mlx5: Fix fence type for IB_WR_LOCAL_INV WRMajd Dibbiny
Currently, for IB_WR_LOCAL_INV WR, when the next fence is None, the current fence will be SMALL instead of Normal Fence. Without this patch krping doesn't work on CX-5 devices and throws following error: The error messages are from CX5 driver are: (from server side) [ 710.434014] mlx5_0:dump_cqe:278:(pid 2712): dump error cqe [ 710.434016] 00000000 00000000 00000000 00000000 [ 710.434016] 00000000 00000000 00000000 00000000 [ 710.434017] 00000000 00000000 00000000 00000000 [ 710.434018] 00000000 93003204 100000b8 000524d2 [ 710.434019] krping: cq completion failed with wr_id 0 status 4 opcode 128 vender_err 32 Fixed the logic to set the correct fence type. Fixes: 6e8484c5cf07 ("RDMA/mlx5: set UMR wqe fence according to HCA cap") Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-11-20{net,IB}/mlx5: Move Page fault EQ and ODP logic to RDMASaeed Mahameed
Use the new generic EQ API to move all ODP RDMA data structures and logic form mlx5 core driver into mlx5_ib driver. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Acked-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-11-20net/mlx5: EQ, Privatize eq_table and friendsSaeed Mahameed
Move unnecessary EQ table structures and declaration from the public include/linux/mlx5/driver.h into the private area of mlx5_core and into eq.c/eq.h. Introduce new mlx5 EQ APIs: mlx5_comp_vectors_count(dev); mlx5_comp_irq_get_affinity_mask(dev, vector); And use them from mlx5_ib or mlx5e netdevice instead of direct access to mlx5_core internal structures. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-11-12IB/mlx5: Improve ODP debugging messagesMoni Shoua
Add and modify debug messages to ODP related error flows. In that context, return code EAGAIN is considered less severe and print level for it is set debug instead of warn. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-11-12IB/mlx5: Lock QP during page fault handlingMoni Shoua
When page fault event for a WQE arrives, the event data contains the resource (e.g. QP) number which will later be used by the page fault handler to retrieve the resource. Meanwhile, another context can destroy the resource and cause use-after-free. To avoid that, take a reference on the resource when handler starts and release it when it ends. Page fault events for RDMA operations don't need to be protected because the driver doesn't need to access the QP in the page fault handler. Fixes: d9aaed838765 ("{net,IB}/mlx5: Refactor page fault handling") Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-11-09infiniband: nes: Fix more direct skb list accesses.David S. Miller
The following: skb = skb->next; ... if (skb == (struct sk_buff *)queue) is transformed into: skb = skb_peek_next(skb, queue); ... if (!skb) Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08cxgb4: use __vlan_hwaccel helpersMichał Mirosław
Use __vlan_hwaccel_put_tag() to set vlan tag and proto fields. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08i40iw: remove use of VLAN_TAG_PRESENTMichał Mirosław
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08i40iw: remove support for ib_get_vector_affinitySagi Grimberg
Devices that does not use managed affinity can not export a vector affinity as the consumer relies on having a static mapping it can map to upper layer affinity (e.g. sw queues). If the driver allows the user to set the device irq affinity, then the affinitization of a long term existing entites is not relevant. For example, nvme-rdma controllers queue-irq affinitization is determined at init time so if the irq affinity changes over time, we are no longer aligned. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Acked-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-11-08mlx5: remove support for ib_get_vector_affinitySagi Grimberg
Devices that does not use managed affinity can not export a vector affinity as the consumer relies on having a static mapping it can map to upper layer affinity (e.g. sw queues). If the driver allows the user to set the device irq affinity, then the affinitization of a long term existing entites is not relevant. For example, nvme-rdma controllers queue-irq affinitization is determined at init time so if the irq affinity changes over time, we are no longer aligned. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-11-06RDMA/hns: prefer dma_zalloc_coherent to dma_alloc_coherent/memseAllen Pais
This is a mechanical transformation, no change in logic. Signed-off-by: Allen Pais <allen.lkml@gmail.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-10-26Revert "mm, mmu_notifier: annotate mmu notifiers with blockable invalidate ↵Michal Hocko
callbacks" Revert 5ff7091f5a2ca ("mm, mmu_notifier: annotate mmu notifiers with blockable invalidate callbacks"). MMU_INVALIDATE_DOES_NOT_BLOCK flags was the only one used and it is no longer needed since 93065ac753e4 ("mm, oom: distinguish blockable mode for mmu notifiers"). We now have a full support for per range !blocking behavior so we can drop the stop gap workaround which the per notifier flag was used for. Link: http://lkml.kernel.org/r/20180827112623.8992-4-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: David Rientjes <rientjes@google.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma updates from Jason Gunthorpe: "This has been a smaller cycle with many of the commits being smallish code fixes and improvements across the drivers. - Driver updates for bnxt_re, cxgb4, hfi1, hns, mlx5, nes, qedr, and rxe - Memory window support in hns - mlx5 user API 'flow mutate/steering' allows accessing the full packet mangling and matching machinery from user space - Support inter-working with verbs API calls in the 'devx' mlx5 user API, and provide options to use devx with less privilege - Modernize the use of syfs and the device interface to use attribute groups and cdev properly for uverbs, and clean up some of the core code's device list management - More progress on net namespaces for RDMA devices - Consolidate driver BAR mmapping support into core code helpers and rework how RDMA holds poitners to mm_struct for get_user_pages cases - First pass to use 'dev_name' instead of ib_device->name - Device renaming for RDMA devices" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (242 commits) IB/mlx5: Add support for extended atomic operations RDMA/core: Fix comment for hw stats init for port == 0 RDMA/core: Refactor ib_register_device() function RDMA/core: Fix unwinding flow in case of error to register device ib_srp: Remove WARN_ON in srp_terminate_io() IB/mlx5: Allow scatter to CQE without global signaled WRs IB/mlx5: Verify that driver supports user flags IB/mlx5: Support scatter to CQE for DC transport type RDMA/drivers: Use core provided API for registering device attributes RDMA/core: Allow existing drivers to set one sysfs group per device IB/rxe: Remove unnecessary enum values RDMA/umad: Use kernel API to allocate umad indexes RDMA/uverbs: Use kernel API to allocate uverbs indexes RDMA/core: Increase total number of RDMA ports across all devices IB/mlx4: Add port and TID to MAD debug print IB/mlx4: Enable debug print of SMPs RDMA/core: Rename ports_parent to ports_kobj RDMA/core: Do not expose unsupported counters IB/mlx4: Refer to the device kobject instead of ports_parent RDMA/nldev: Allow IB device rename through RDMA netlink ...
2018-10-25Merge tag 'pci-v4.20-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - Fix ASPM link_state teardown on removal (Lukas Wunner) - Fix misleading _OSC ASPM message (Sinan Kaya) - Make _OSC optional for PCI (Sinan Kaya) - Don't initialize ASPM link state when ACPI_FADT_NO_ASPM is set (Patrick Talbert) - Remove x86 and arm64 node-local allocation for host bridge structures (Punit Agrawal) - Pay attention to device-specific _PXM node values (Jonathan Cameron) - Support new Immediate Readiness bit (Felipe Balbi) - Differentiate between pciehp surprise and safe removal (Lukas Wunner) - Remove unnecessary pciehp includes (Lukas Wunner) - Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner) - Tolerate PCIe Slot Presence Detect being hardwired to zero to workaround broken hardware, e.g., the Wilocity switch/wireless device (Lukas Wunner) - Unify pciehp controller & slot structs (Lukas Wunner) - Constify hotplug_slot_ops (Lukas Wunner) - Drop hotplug_slot_info (Lukas Wunner) - Embed hotplug_slot struct into users instead of allocating it separately (Lukas Wunner) - Initialize PCIe port service drivers directly instead of relying on initcall ordering (Keith Busch) - Restore PCI config state after a slot reset (Keith Busch) - Save/restore DPC config state along with other PCI config state (Keith Busch) - Reference count devices during AER handling to avoid race issue with concurrent hot removal (Keith Busch) - If an Upstream Port reports ERR_FATAL, don't try to read the Port's config space because it is probably unreachable (Keith Busch) - During error handling, use slot-specific reset instead of secondary bus reset to avoid link up/down issues on hotplug ports (Keith Busch) - Restore previous AER/DPC handling that does not remove and re-enumerate devices on ERR_FATAL (Keith Busch) - Notify all drivers that may be affected by error recovery resets (Keith Busch) - Always generate error recovery uevents, even if a driver doesn't have error callbacks (Keith Busch) - Make PCIe link active reporting detection generic (Keith Busch) - Support D3cold in PCIe hierarchies during system sleep and runtime, including hotplug and Thunderbolt ports (Mika Westerberg) - Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots are empty or occupied (Jon Derrick) - Remove duplicated include from pci/pcie/err.c and unused variable from cpqphp (YueHaibing) - Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza Pawandeep) - Uninline PCI bus accessors for better ftracing (Keith Busch) - Remove unused AER Root Port .error_resume method (Keith Busch) - Use kfifo in AER instead of a local version (Keith Busch) - Use threaded IRQ in AER bottom half (Keith Busch) - Use managed resources in AER core (Keith Busch) - Reuse pcie_port_find_device() for AER injection (Keith Busch) - Abstract AER interrupt handling to disconnect error injection (Keith Busch) - Refactor AER injection callbacks to simplify future improvments (Keith Busch) - Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski) - Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko) - Add switch fall-through annotations (Gustavo A. R. Silva) - Remove unused Switchtec quirk variable (Joshua Abraham) - Fix pci.c kernel-doc warning (Randy Dunlap) - Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig) - Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng) - Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid useless dmesg errors (Logan Gunthorpe) - Update Switchtec NTB documentation (Wesley Yung) - Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz) - Avoid panic when drivers enable MSI/MSI-X twice (Tonghao Zhang) - Add PCI support for peer-to-peer DMA (Logan Gunthorpe) - Add sysfs group for PCI peer-to-peer memory statistics (Logan Gunthorpe) - Add PCI peer-to-peer DMA scatterlist mapping interface (Logan Gunthorpe) - Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan Gunthorpe) - Add PCI peer-to-peer DMA driver writer's documentation (Logan Gunthorpe) - Add block layer flag to indicate driver support for PCI peer-to-peer DMA (Logan Gunthorpe) - Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P memory (Logan Gunthorpe) - Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan Gunthorpe) - Add nvme-pci support for PCI peer-to-peer memory in requests (Logan Gunthorpe) - Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise, Christoph Hellwig, Logan Gunthorpe) - Cache VF config space size to optimize enumeration of many VFs (KarimAllah Ahmed) - Remove unnecessary <linux/pci-ats.h> include (Bjorn Helgaas) - Fix VMD AERSID quirk Device ID matching (Jon Derrick) - Fix Cadence PHY handling during probe (Alan Douglas) - Signal Cadence Endpoint interrupts via AXI region 0 instead of last region (Alan Douglas) - Write Cadence Endpoint MSI interrupts with 32 bits of data (Alan Douglas) - Remove redundant controller tests for "device_type == pci" (Rob Herring) - Document R-Car E3 (R8A77990) bindings (Tho Vu) - Add device tree support for R-Car r8a7744 (Biju Das) - Drop unused mvebu PCIe capability code (Thomas Petazzoni) - Add shared PCI bridge emulation code (Thomas Petazzoni) - Convert mvebu to use shared PCI bridge emulation (Thomas Petazzoni) - Add aardvark Root Port emulation (Thomas Petazzoni) - Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach) - Add initial power management for i.MX7 (Leonard Crestez) - Add PME_Turn_Off support for i.MX7 (Leonard Crestez) - Fix qcom runtime power management error handling (Bjorn Andersson) - Update TI dra7xx unaligned access errata workaround for host mode as well as endpoint mode (Vignesh R) - Fix kirin section mismatch warning (Nathan Chancellor) - Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare) - Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I) - Update Keystone to use MRRS quirk for host bridge instead of open coding (Kishon Vijay Abraham I) - Refactor Keystone link establishment (Kishon Vijay Abraham I) - Simplify and speed up Keystone link training (Kishon Vijay Abraham I) - Remove unused Keystone host_init argument (Kishon Vijay Abraham I) - Merge Keystone driver files into one (Kishon Vijay Abraham I) - Remove redundant Keystone platform_set_drvdata() (Kishon Vijay Abraham I) - Rename Keystone functions for uniformity (Kishon Vijay Abraham I) - Add Keystone device control module DT binding (Kishon Vijay Abraham I) - Use SYSCON API to get Keystone control module device IDs (Kishon Vijay Abraham I) - Clean up Keystone PHY handling (Kishon Vijay Abraham I) - Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I) - Clean up Keystone config space access checks (Kishon Vijay Abraham I) - Get Keystone outbound window count from DT (Kishon Vijay Abraham I) - Clean up Keystone outbound window configuration (Kishon Vijay Abraham I) - Clean up Keystone DBI setup (Kishon Vijay Abraham I) - Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I) - Fix Keystone IRQ status checking (Kishon Vijay Abraham I) - Add debug messages for all Keystone errors (Kishon Vijay Abraham I) - Clean up Keystone includes and macros (Kishon Vijay Abraham I) - Fix Mediatek unchecked return value from devm_pci_remap_iospace() (Gustavo A. R. Silva) - Fix Mediatek endpoint/port matching logic (Honghui Zhang) - Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui Zhang) - Remove redundant Mediatek PM domain check (Honghui Zhang) - Convert Mediatek to pci_host_probe() (Honghui Zhang) - Fix Mediatek MSI enablement (Honghui Zhang) - Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang) - Add Mediatek loadable module support (Honghui Zhang) - Detach VMD resources after stopping root bus to prevent orphan resources (Jon Derrick) - Convert pcitest build process to that used by other tools (iio, perf, etc) (Gustavo Pimentel) * tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits) PCI/AER: Refactor error injection fallbacks PCI/AER: Abstract AER interrupt handling PCI/AER: Reuse existing pcie_port_find_device() interface PCI/AER: Use managed resource allocations PCI: pcie: Remove redundant 'default n' from Kconfig PCI: aardvark: Implement emulated root PCI bridge config space PCI: mvebu: Convert to PCI emulated bridge config space PCI: mvebu: Drop unused PCI express capability code PCI: Introduce PCI bridge emulated config space common logic PCI: vmd: Detach resources after stopping root bus nvmet: Optionally use PCI P2P memory nvmet: Introduce helper functions to allocate and free request SGLs nvme-pci: Add support for P2P memory in requests nvme-pci: Use PCI p2pmem subsystem to manage the CMB IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]() block: Add PCI P2P flag for request queue PCI/P2PDMA: Add P2P DMA driver writer's documentation docs-rst: Add a new directory for PCI documentation PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset ...
2018-10-20Merge branch 'pci/misc'Bjorn Helgaas
- Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski) - Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko) - Add switch fall-through annotations (Gustavo A. R. Silva) - Remove unused Switchtec quirk variable (Joshua Abraham) - Fix pci.c kernel-doc warning (Randy Dunlap) - Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig) - Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng) - Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid useless dmesg errors (Logan Gunthorpe) - Update Switchtec NTB documentation (Wesley Yung) - Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz) * pci/misc: PCI: pcie: Remove redundant 'default n' from Kconfig NTB: switchtec_ntb: Update switchtec documentation with prerequisites for NTB PCI: Fix Switchtec DMA aliasing quirk dmesg noise PCI: Add macro for Switchtec quirk declarations PCI: Add Device IDs for Intel GPU "spurious interrupt" quirk PCI: Remove pci_set_dma_max_seg_size() PCI: Remove pci_set_dma_seg_boundary() PCI: Remove pci_unmap_addr() wrappers for DMA API PCI / ACPI: Mark expected switch fall-through PCI: Remove set but unused variable PCI: Fix pci.c kernel-doc parameter warning PCI: Allocate dma_alias_mask with bitmap_zalloc() PCI: Remove unused NFP32xx IDs
2018-10-18net/mlx5: Refactor fragmented buffer struct fields and init flowTariq Toukan
Take struct mlx5_frag_buf out of mlx5_frag_buf_ctrl, as it is not needed to manage and control the datapath of the fragmented buffers API. struct mlx5_frag_buf contains control info to manage the allocation and de-allocation of the fragmented buffer. Its fields are not relevant for datapath, so here I take them out of the struct mlx5_frag_buf_ctrl, except for the fragments array itself. In addition, modified mlx5_fill_fbc to initialise the frags pointers as well. This implies that the buffer must be allocated before the function is called. A set of type-specific *_get_byte_size() functions are replaced by a generic one. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-10-17net/mlx5: Add a no-append flow insertion modePaul Blakey
If no-append flag is set, we will add a new FTE, instead of appending the actions of the inserted rule when the same match already exists. While here, move the has_flow_tag boolean indicator to be a flag too. This patch doesn't change any functionality. Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanmox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-10-17net/mlx5: Use flow counter IDs and not the wrapping cache objectMark Bloch
Currently, when a flow rule is created using the FS core layer, the caller has to pass the entire flow counter object and not just the counter HW handle (ID). This requires both the FS core and the caller to have knowledge about the inner implementation of the FS layer flow counters cache and limits the possible users. Move to use the counter ID across the place when dealing with flows. Doing this decoupling, now can we privatize the inner implementation of the flow counters. Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-10-17Merge branch 'mlx5-next' of ↵Saeed Mahameed
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux into net-next mlx5 updates for both net-next and rdma-next * 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux: (21 commits) net/mlx5: Expose DC scatter to CQE capability bit net/mlx5: Update mlx5_ifc with DEVX UID bits net/mlx5: Set uid as part of DCT commands net/mlx5: Set uid as part of SRQ commands net/mlx5: Set uid as part of SQ commands net/mlx5: Set uid as part of RQ commands net/mlx5: Set uid as part of QP commands net/mlx5: Set uid as part of CQ commands net/mlx5: Rename incorrect naming in IFC file net/mlx5: Export packet reformat alloc/dealloc functions net/mlx5: Pass a namespace for packet reformat ID allocation net/mlx5: Expose new packet reformat capabilities {net, RDMA}/mlx5: Rename encap to reformat packet net/mlx5: Move header encap type to IFC header file net/mlx5: Break encap/decap into two separated flow table creation flags net/mlx5: Add support for more namespaces when allocating modify header net/mlx5: Export modify header alloc/dealloc functions net/mlx5: Add proper NIC TX steering flow tables support net/mlx5: Cleanup flow namespace getter switch logic net/mlx5: Add memic command opcode to command checker ... Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-10-17IB/mlx5: Add support for extended atomic operationsYonatan Cohen
Extended atomic operations cmp&swp and fetch&add is a Mellanox feature extending the standard atomic operation to use, varied operand sizes, as apposed to normal atomic operation that use an 8 byte operand only. Extended atomics allows masking the results and arguments. This patch configures QP to support extended atomic operation with the maximum size possible, as exposed by HCA capabilities. Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com> Reviewed-by: Guy Levi <guyle@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-10-17IB/mlx5: Allow scatter to CQE without global signaled WRsYonatan Cohen
Requester scatter to CQE is restricted to QPs configured to signal all WRs. This patch adds ability to enable scatter to cqe (force enable) in the requester without sig_all, for users who do not want all WRs signaled but rather just the ones whose data found in the CQE. Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com> Reviewed-by: Guy Levi <guyle@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-10-17IB/mlx5: Verify that driver supports user flagsYonatan Cohen
Flags sent down from user might not be supported by running driver. This might lead to unwanted bugs. To solve this, added macro to test for unsupported flags. Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-10-17IB/mlx5: Support scatter to CQE for DC transport typeYonatan Cohen
Scatter to CQE is a HW offload that saves PCI writes by scattering the payload to the CQE. This patch extends already existing functionality to support DC transport type. Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com> Reviewed-by: Guy Levi <guyle@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-10-17RDMA/drivers: Use core provided API for registering device attributesParav Pandit
Use rdma_set_device_sysfs_group() to register device attributes and simplify the driver. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16IB/mlx4: Add port and TID to MAD debug printHåkon Bugge
Add said information and make the debug print format consistent. Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com> Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-10-16IB/mlx4: Enable debug print of SMPsHåkon Bugge
IB Subnet Management Packets (SMPs) were excluded from debug prints. Fixed by enabling print even on QP0 MADs. Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-10-16IB/mlx4: Refer to the device kobject instead of ports_parentParav Pandit
iov sysfs tree is created under ib device at /sys/class/infiniband/mlx4_0/iov. And, ibdev->ports_parent->parent = &ibdev->dev. Therefore, refer to device's kobject directly instead of indirect access to it. Additionally, iov entries are created under device kobject and deleted before device is removed. There is no need to hold additional reference to device kobject in provider driver. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-10-16IB/mlx5: Fix MR cache initializationArtemy Kovalyov
Schedule MR cache work only after bucket was initialized. Cc: <stable@vger.kernel.org> # 4.10 Fixes: 49780d42dfc9 ("IB/mlx5: Expose MR cache for mlx5_ib") Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16RDMA/mlx5: Add support for flow tag to raw create flowMark Bloch
A user can provide a hint which will be attached to the packet and written to the CQE on receive. This can be used as a way to offload operations into the HW, for example parsing a packet which is a tunneled packet, and if so, pass 0x1 as the hint. The software can use that hint to decapsulate the packet and parse only the inner headers thus saving CPU cycles. Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16RDMA/mlx5: Remove extraneous error checkGal Pressman
Remove double error check from create user RQ error flow. Fixes: 79b20a6c3014 ("IB/mlx5: Add receive Work Queue verbs") Signed-off-by: Gal Pressman <pressmangal@gmail.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16IB/mlx5: Verify DEVX object typeYishai Hadas
Verify that the input DEVX object type matches the created object. As the obj_id in the firmware is not globally unique the object type must be considered upon checking for a valid object id. Once both the type and the id match we know that the lock was taken on the correct object by the uverbs layer. Fixes: e662e14d801b ("IB/mlx5: Add DEVX support for modify and query commands") Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16RDMA/hns: Add FRMR support for hip08Yixian Liu
This patch adds fast register physical memory region (FRMR) support for hip08. Signed-off-by: Yixian Liu <liuyixian@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16RDMA/bnxt_re: Avoid resource leak in case the NQ registration failsSelvin Xavier
In case the NQ alloc/enable fails, free up the already allocated/enabled NQ before reporting failure. Also, track the alloc/enable using proper state checking. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16RDMA/bnxt_re: Wait for delayed work to finish before device removalSelvin Xavier
Delayed work bnxt_re_worker would be still running even after cancel_delayed_work returns. This causes crash as the driver proceeds with device removal. To make sure that the work is finished before returning, use cancel_delayed_work_sync. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16RDMA/bnxt_re: Limit max_pkey to 16 bit valueDevesh Sharma
Some FW versios return pkey values more than 0xFFFF. pkey_tbl_len of ib_port_attr is 16bit value. So restricting max_pkeys to 0xFFFF. Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16RDMA/bnxt_re: Fix qp async event reportingDevesh Sharma
Reports affiliated async event on the qp-async event channel instead of global event channel. Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16RDMA/bnxt_re: Report out of sequence hw countersSelvin Xavier
Expose out of sequence errors received from FW. This counter is a 32 bit counter and driver has to accumulate the counter. Stores the previous value for calculating the difference in the next query. Also, update the HW statistics structure with new fields. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16RDMA/bnxt_re: Expose rx discards and drop countersSelvin Xavier
Expose the RoCE discard and drop counters from the HW statistics context Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16RDMA/bnxt_re: Prevent driver crash due to NULL pointer in error message printSomnath Kotur
crsqe->resp would be NULL in case the host command timed out before getting a response from HW. Check for NULL pointer to avoid a potential crash while printing the error message. Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16RDMA/bnxt_re: Drop L2 async events silentlyDevesh Sharma
In some FW versions, RoCE driver also receives an async notification which was directed to L2 driver. RoCE driver does not handle this and print a message to syslog. Drop these notifications silently. Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16RDMA/bnxt_re: Avoid accessing nq->bar_reg_iomem in failure caseSelvin Xavier
In the failure path, nq->bar_reg_iomem gets accessed without initializing. Avoid this by calling the bnxt_qplib_nq_stop_irq only if the initialization is complete. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Fixes: 6e04b1035689 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes") Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16RDMA/bnxt_re: Avoid NULL check after accessing the pointerSelvin Xavier
This is reported by smatch check. rcfw->creq_bar_reg_iomem is accessed in bnxt_qplib_rcfw_stop_irq and this variable check afterwards doesn't make sense. Also, rcfw->creq_bar_reg_iomem will never be NULL. So Removing this check. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 6e04b1035689 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes") Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16RDMA/bnxt_re: Remove the unnecessary version macro definitionSelvin Xavier
Version macro is not required as the driver is not maintaining the version. Removing the references of this macro too. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16RDMA/bnxt_re: Fix recursive lock warning in debug kernelSelvin Xavier
Fix possible recursive lock warning. Its a false warning as the locks are part of two differnt HW Queue data structure - cmdq and creq. Debug kernel is throwing the following warning and stack trace. [ 783.914967] ============================================ [ 783.914970] WARNING: possible recursive locking detected [ 783.914973] 4.19.0-rc2+ #33 Not tainted [ 783.914976] -------------------------------------------- [ 783.914979] swapper/2/0 is trying to acquire lock: [ 783.914982] 000000002aa3949d (&(&hwq->lock)->rlock){..-.}, at: bnxt_qplib_service_creq+0x232/0x350 [bnxt_re] [ 783.914999] but task is already holding lock: [ 783.915002] 00000000be73920d (&(&hwq->lock)->rlock){..-.}, at: bnxt_qplib_service_creq+0x2a/0x350 [bnxt_re] [ 783.915013] other info that might help us debug this: [ 783.915016] Possible unsafe locking scenario: [ 783.915019] CPU0 [ 783.915021] ---- [ 783.915034] lock(&(&hwq->lock)->rlock); [ 783.915035] lock(&(&hwq->lock)->rlock); [ 783.915037] *** DEADLOCK *** [ 783.915038] May be due to missing lock nesting notation [ 783.915039] 1 lock held by swapper/2/0: [ 783.915040] #0: 00000000be73920d (&(&hwq->lock)->rlock){..-.}, at: bnxt_qplib_service_creq+0x2a/0x350 [bnxt_re] [ 783.915044] stack backtrace: [ 783.915046] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.0-rc2+ #33 [ 783.915047] Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 1.0.4 08/28/2014 [ 783.915048] Call Trace: [ 783.915049] <IRQ> [ 783.915054] dump_stack+0x90/0xe3 [ 783.915058] __lock_acquire+0x106c/0x1080 [ 783.915061] ? sched_clock+0x5/0x10 [ 783.915063] lock_acquire+0xbd/0x1a0 [ 783.915065] ? bnxt_qplib_service_creq+0x232/0x350 [bnxt_re] [ 783.915069] _raw_spin_lock_irqsave+0x4a/0x90 [ 783.915071] ? bnxt_qplib_service_creq+0x232/0x350 [bnxt_re] [ 783.915073] bnxt_qplib_service_creq+0x232/0x350 [bnxt_re] [ 783.915078] tasklet_action_common.isra.17+0x197/0x1b0 [ 783.915081] __do_softirq+0xcb/0x3a6 [ 783.915084] irq_exit+0xe9/0x100 [ 783.915085] do_IRQ+0x6a/0x120 [ 783.915087] common_interrupt+0xf/0xf [ 783.915088] </IRQ> Use nested notation for the spin_lock to avoid this warning. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
generated by cgit (git 2.34.1) at 2025-09-11 04:44:11 +0000