summaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)Author
2017-10-19Input: allow matching device IDs on property bitsDmitry Torokhov
Let's allow matching input devices on their property bits, both in-kernel and when generating module aliases. Tested-by: Roderick Colenbrander <roderick.colenbrander@sony.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-19Input: factor out and export input_device_id matching codeDmitry Torokhov
Factor out and export input_match_device_id() so that modules may use it. It will be needed by joydev to blacklist accelerometers in composite devices. Tested-by: Roderick Colenbrander <roderick.colenbrander@sony.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-19Input: goodix - poll the 'buffer status' bit before reading dataPaul Cercueil
The Goodix panel triggers an interrupt on touch events. However, its registers will contain the valid values a short time after the interrupt, and not when it's raised. At that moment, the 'buffer status' bit is set. Previously, if the 'buffer status' bit was not set when the registers were read, the data was discarded and no input event was emitted, causing "finger down" or "finger up" events to be missed sometimes. This went unnoticed until v4.9, as the DesignWare I2C driver commonly used with this driver had enough latency for that bug to never trigger until commit 2702ea7dbec5 ("i2c: designware: wait for disable/enable only if necessary"). Now, in the IRQ handler we will poll (with a timeout) the 'buffer status' bit and process the data of the panel as soon as this bit gets set. Note that the Goodix panel will send a few spurious interrupts after the 'finger up' event, in which the 'buffer status' bit will never be set. Cc: Bastien Nocera <hadess@hadess.net> Cc: russianneuromancer@ya.ru Signed-off-by: Paul Cercueil <paul@crapouillou.net> [hdegoede@redhat.com: Change poll loop to use jiffies, add comment about typical poll time] Signed-off-by: Hans de Goede <hdegoede@redhat.com> [dtor: rearranged control flow a bit to avoid explicit goto and double check] Reviewed-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-19Input: axp20x-pek - fix module not auto-loading for axp221 pekHans de Goede
Now that we have a platform_device_id table and multiple supported ids we should be using MODULE_DEVICE_TABLE instead of MODULE_ALIAS. This fixes a regression on Bay and Cherry Trail devices, where the power button is now enumerated as an "axp221-pek" and it was impossible to wakeup these devices from suspend since the module did not load. Fixes: c3cc94470bd3 ("Input: axp20x-pek - add support for AXP221 PEK") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-19Input: tca8418 - enable interrupt after it has been requestedDamien Riegel
Currently, enabling keypad interrupts is one of the first operations done on the keypad, even before the interrupt is requested, so there is a small time window where the keypad can fire interrupts but the driver is not yet ready to handle them. It's fine for level interrupts because they will be handled anyway, but not so much for edge ones. This commit modifies and moves the function in charge of configuring the keypad. Enabling interrupts is now the last thing done on the keypad, and after the interrupt has been requested by the driver. Writing to the config register was also used to determine if the device was indeed present on the bus or not, this has been replaced by reading the lock/event count register to keep the same functionality. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-18Input: stmfts - fix setting ABS_MT_POSITION_* maximum sizeChanwoo Choi
The commit 78bcac7b2ae1e ("Input: add support for the STMicroelectronics FingerTip touchscreen) used the 'touchscreen_parse_properties()' helper function in order to get the value of common properties. But, commit 78bcac7b2ae1e didn't set the capability of ABS_MT_POSITION_* before calling touchscreen_parse_properties(). In result, the max_x and max_y of 'struct touchscreen_properties' were not set. Fixes: 78bcac7b2ae1e ("Input: add support for the STMicroelectronics FingerTip touchscreen") Cc: stable@vger.kernel.org Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-18Input: ti_am335x_tsc - fix incorrect step config for 5 wire touchscreenJeff Lance
Step config setting for 5 wire touchscreen is incorrect for Y coordinates. It was broken while we moved to DT. If you look close at the offending commit bb76dc09ddfc ("input: ti_am33x_tsc: Order of TSC wires, made configurable"), the change was: - STEPCONFIG_XNP | STEPCONFIG_YPN; + ts_dev->bit_xn | ts_dev->bit_yp; while bit_xn = STEPCONFIG_XNN and bit_yp = STEPCONFIG_YNN. Not quite the same. Fixes: bb76dc09ddfc ("input: ti_am33x_tsc: Order of TSC wires, made configurable") Signed-off-by: Jeff Lance <j-lance1@ti.com> [vigneshr@ti.com: Rebase to v4.14-rc1] Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Michael Nazzareno Trimarchi <michael@amarulasolutions.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-09Input: synaptics-rmi4 - make array rmi_f54_report_type_names staticColin Ian King
The array rmi_f54_report_type_names is local to the source and does not need to be in global scope, so make it static. Also make the array const char * const. Cleans up sparse warning: symbol 'rmi_f54_report_type_names' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-09Input: synaptics - disable kernel tracking on SMBus devicesAndrew Duggan
In certain situations kernel tracking seems to be getting confused and incorrectly reporting the slot of a contact. On example is when the user does a three finger click or tap and then places two fingers on the touchpad in the same area. The kernel tracking code seems to continue to think that there are three contacts on the touchpad and incorrectly alternates the slot of one of the contacts. The result that is the input subsystem reports a stream of button press and release events as the reported slot changes. Kernel tracking was originally enabled to prevent cursor jumps, but it is unclear how much of an issue kernel jumps actually are. This patch simply disabled kernel tracking for now. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1482640 Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Tested-by: Kamil Páral <kparal@redhat.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-09Merge 4.14-rc4 into staging-nextGreg Kroah-Hartman
We want the staging/iio fixes in here as well to handle merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-05timer: Remove expires and data arguments from DEFINE_TIMERKees Cook
Drop the arguments from the macro and adjust all callers with the following script: perl -pi -e 's/DEFINE_TIMER\((.*), 0, 0\);/DEFINE_TIMER($1);/g;' \ $(git grep DEFINE_TIMER | cut -d: -f1 | sort -u | grep -v timer.h) Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # for m68k parts Acked-by: Guenter Roeck <linux@roeck-us.net> # for watchdog parts Acked-by: David S. Miller <davem@davemloft.net> # for networking parts Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Kalle Valo <kvalo@codeaurora.org> # for wireless parts Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: linux-mips@linux-mips.org Cc: Petr Mladek <pmladek@suse.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Sebastian Reichel <sre@kernel.org> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: linux1394-devel@lists.sourceforge.net Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: linux-s390@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Ursula Braun <ubraun@linux.vnet.ibm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Harish Patil <harish.patil@cavium.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Reed <mdr@sgi.com> Cc: Manish Chopra <manish.chopra@cavium.com> Cc: Len Brown <len.brown@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-pm@vger.kernel.org Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Julian Wiedmann <jwi@linux.vnet.ibm.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Mark Gross <mark.gross@intel.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Guenter Roeck <linux@roeck-us.net> Cc: netdev@vger.kernel.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lkml.kernel.org/r/1507159627-127660-11-git-send-email-keescook@chromium.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-09-29Input: ad7879 - use managed devm_device_add_groupAndi Shyti
Commit 57b8ff070f98 ("driver core: add devm_device_add_group() and friends") has added the managed version for creating sysfs group files. Use devm_device_add_group instead of sysfs_create_group and remove the action that cleans the sysfs file when exiting the driver. Signed-off-by: Andi Shyti <andi@etezian.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-29Input: edt-ft5x06 - use managed devm_device_add_groupAndi Shyti
Commit 57b8ff070f98 ("driver core: add devm_device_add_group() and friends") has added the managed version for creating sysfs group files. Use devm_device_add_group instead of sysfs_create_group and remove the relative sysfs_remove_group and goto label. Signed-off-by: Andi Shyti <andi@etezian.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-29Input: wdt87xx_i2c - use managed devm_device_add_groupAndi Shyti
Commit 57b8ff070f98 ("driver core: add devm_device_add_group() and friends") has added the managed version for creating sysfs group files. Use devm_device_add_group instead of sysfs_create_group and remove the relative sysfs_remove_group. Signed-off-by: Andi Shyti <andi@etezian.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-29Input: rohm_bu21023 - use managed devm_device_add_groupAndi Shyti
Commit 57b8ff070f98 ("driver core: add devm_device_add_group() and friends") has added the managed version for creating sysfs group files. Use devm_device_add_group instead of sysfs_create_group and remove the action that cleans the sysfs file when exiting the driver. Signed-off-by: Andi Shyti <andi@etezian.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-29Input: raydium_i2c_ts - use managed devm_device_add_groupAndi Shyti
Commit 57b8ff070f98 ("driver core: add devm_device_add_group() and friends") has added the managed version for creating sysfs group files. Use devm_device_add_group instead of sysfs_create_group and remove the action that cleans the sysfs file when exiting the driver. Signed-off-by: Andi Shyti <andi@etezian.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-29Input: melfas_mip4 - use managed devm_device_add_groupAndi Shyti
Commit 57b8ff070f98 ("driver core: add devm_device_add_group() and friends") has added the managed version for creating sysfs group files. Use devm_device_add_group instead of sysfs_create_group and remove the action that cleans the sysfs file when exiting the driver. Signed-off-by: Andi Shyti <andi@etezian.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-29Input: elants_i2c - use managed devm_device_add_groupAndi Shyti
Commit 57b8ff070f98 ("driver core: add devm_device_add_group() and friends") has added the managed version for creating sysfs group files. Use devm_device_add_group instead of sysfs_create_group and remove the action that cleans the sysfs file when exiting the driver. Signed-off-by: Andi Shyti <andi@etezian.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-29Input: elan_i2c - do not clobber interrupt trigger on x86Dmitry Torokhov
On x86 we historically used falling edge interrupts in the driver because that's how first Chrome devices were configured. They also did not use ACPI to enumerate I2C devices (because back then there was no kernel support for that), so trigger was hard-coded in the driver. However the controller behavior is much more reliable if we use level triggers, and that is how we configured ARM devices, and how want to configure newer x86 devices as well. All newer x86 boxes have their I2C devices enumerated in ACPI. Let's see if platform code (ACPI, DT) described interrupt and specified particular trigger type, and if so, let's use it instead of always clobbering trigger with IRQF_TRIGGER_FALLING. We will still use this trigger type as a fallback if platform code left interrupt trigger unconfigured. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196761 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-26Input: usbtouchscreen - use EXPERT instead of EMBEDDED for EasyTouchRandy Dunlap
Change control of TOUCHSCREEN_USB_EASYTOUCH prompt string from EMBEDDED to EXPERT to match the rest of this Kconfig file. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-26Input: sa1111ps2 - extend test delayRussell King
A 2us delay is too small for the bus to settle after writing to the register. Extend to 10us which gives more reliable results. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-26Input: sa1111ps2 - remove special sa1111 mmio accessorsRussell King
Remove the special SA1111 MMIO accessors from the SA1111 PS/2 driver as their definition will be removed shortly. The SA1111 accessors are barrierless, so use the _relaxed variants. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-26Input: sa1111ps2 - use sa1111_get_irq() to obtain IRQ resourcesRussell King
Use the provided sa1111_get_irq() to fetch the IRQ resources for the SA1111 PS/2 driver. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-25Merge tag 'iio-for-4.15a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Round one of new device support, features and cleanup for IIO in the 4.15 cycle. Note there is a misc driver drop in here given we have support in IIO and the feeling is no one will care. A large part of this series is a boiler plate removal series avoiding the need to explicitly provide THIS_MODULE in various locations. It's very dull but touches all drivers. New device support * ad5446 - add ids to support compatible parts DAC081S101, DAC101S101, DAC121S101. - add the dac7512 id and drop the misc driver as feeling is no one is using it (was introduced for a board that is long obsolete) * mt6577 - add bindings for mt2712 which is fully compatible with other supported parts. * st_pressure - add support for LPS33HW and LPS35HW with bindings (ids mostly). New features * ccs811 - Add support for the data ready trigger. * mma8452 - remove artifical restriction on supporting multiple event types at the same time. * tcs3472 - support out of threshold events Core and tree wide cleanup * Use macro magic to remove the need to provide THIS_MODULE as part of struct iio_info or struct iio_trigger_ops. This is similar to work done in a number of other subsystems (e.g. i2c, spi). All drivers are fixed and then the fields in these structures are removed. This will cause build failures for out of tree drivers and any new drivers that cross with this work going into the kernel. Note mostly done with a coccinelle patch, included in the series on the mailing list but not merged as the fields no longer exist in the structures so the any hold outs will cause a build failure. Cleanups * ads1015 - avoid writing config register when it doesn't change. - add 10% to conversion wait time as it seems it is sometimes a little small. * ade7753 - replace use of core mlock with a local lock. This is part of a long term effort to make the use of mlock opaque and single purpose. * ade7759 - expand the use of buf_lock to cover previous mlock cases. This is a slightly nicer solution to the same issue as in ade7753. * cros_ec - drop an unused variable * inv_mpu6050 - add a missing break in a switch for consistency - not actual bug, - make some local arrays static to save on object code size. * max5481 - drop manual setting of the spi module owner as handled by the spi core. * max5487 - drop manual setting of the spi module owner as handled by the spi core. * max9611 - drop explicit setting of the i2c module owner as handled by the i2c core. * mcp320x - speed up reads on single channel devices, - drop unused of_device_id data elements, - document the struct mcp320x, - improve binding docs to reflect restrictions on spi setup and to make it explicit that the reference regulator is needed. * mma8452 - symbolic to octal permissions, - unsigned to unsigned int. * st_lsm6dsx - avoid setting odr values multiple times, - drop config of LIR as it is only ever set to the existing defaults, - drop rounding configuration as it only ever matches the defaults. * ti-ads8688 - drop manual setting of the spi module owner as handled by the spi core. * tsl2x7x - constify the i2c_device_id, - cleanup limit checks to avoid static checker warnings (and generally have nicer code).
2017-09-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - fixes for two long standing issues (lock up and a crash) in force feedback handling in uinput driver - tweak to firmware update timing in Elan I2C touchpad driver. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elan_i2c - extend Flash-Write delay Input: uinput - avoid crash when sending FF request to device going away Input: uinput - avoid FF flush when destroying device
2017-09-22Input: elan_i2c - extend Flash-Write delayKT Liao
The original 20ms delay is only marginally enough delay after a block write operation during firmware update. Let's increase the delay to ensure that the controller finishes up storing the page to avoid failures in the firmware updates. Signed-off-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-22Input: stmfts - use devm_device_add_groupAndi Shyti
instead of sysfs_create_group. Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-21Input: elan_i2c - remove duplicate ELAN0605 idNik Nyby
ELAN0605 appears twice here. Signed-off-by: Nik Nyby <nikolas@gnu.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-21Merge tag 'ib-mfd-input-rtc-v4.14' of ↵Dmitry Torokhov
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next Merge "Immutable branch between MFD, Input and RTC due for the v3.14 merge window" to have dm355evm_msp.h header moved into right place.
2017-09-21Merge tag 'ib-mfd-many-v4.14' of ↵Dmitry Torokhov
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next Merge "Immutable branch between MFD and many other subsystems due for the v4.14 merge window" to get the TWL headers moved to the right place.
2017-09-21Input: uinput - avoid crash when sending FF request to device going awayDmitry Torokhov
If FF request comes in while uinput device is going away, uinput_request_send() will fail with -ENODEV, and uinput_request_submit() will attempt to mark the slot as unused by calling uinput_request_done(). Unfortunately in this case we haven't initialized request->done completion yet, and we get a crash: [ 39.402036] BUG: spinlock bad magic on CPU#1, fftest/3108 [ 39.402046] lock: 0xffff88006a93bb00, .magic: 00000000, .owner: /39, .owner_cpu: 1217155072 [ 39.402055] CPU: 1 PID: 3108 Comm: fftest Tainted: G W 4.13.0+ #15 [ 39.402059] Hardware name: LENOVO 20HQS0EG02/20HQS0EG02, BIOS N1MET37W (1.22 ) 07/04/2017 [ 39.402064] 0000000000000086 f0fad82f3ceaa120 ffff88006a93b9a0 ffffffff9de941bb [ 39.402077] ffff88026df8ae00 ffff88006a93bb00 ffff88006a93b9c0 ffffffff9dca62b7 [ 39.402088] ffff88006a93bb00 ffff88006a93baf8 ffff88006a93b9e0 ffffffff9dca62e7 [ 39.402099] Call Trace: [ 39.402112] [<ffffffff9de941bb>] dump_stack+0x4d/0x63 [ 39.402123] [<ffffffff9dca62b7>] spin_dump+0x97/0x9c [ 39.402130] [<ffffffff9dca62e7>] spin_bug+0x2b/0x2d [ 39.402138] [<ffffffff9dca6373>] do_raw_spin_lock+0x28/0xfd [ 39.402147] [<ffffffff9e3055cd>] _raw_spin_lock_irqsave+0x19/0x1f [ 39.402154] [<ffffffff9dca05b7>] complete+0x1d/0x48 [ 39.402162] [<ffffffffc04f30af>] 0xffffffffc04f30af [ 39.402167] [<ffffffffc04f468c>] 0xffffffffc04f468c [ 39.402177] [<ffffffff9dd59c16>] ? __slab_free+0x22f/0x359 [ 39.402184] [<ffffffff9dcc13e9>] ? tk_clock_read+0xc/0xe [ 39.402189] [<ffffffffc04f471f>] 0xffffffffc04f471f [ 39.402195] [<ffffffff9dc9ffe5>] ? __wake_up+0x44/0x4b [ 39.402200] [<ffffffffc04f3240>] ? 0xffffffffc04f3240 [ 39.402207] [<ffffffff9e0f57f3>] erase_effect+0xa1/0xd2 [ 39.402214] [<ffffffff9e0f58c6>] input_ff_flush+0x43/0x5c [ 39.402219] [<ffffffffc04f32ad>] 0xffffffffc04f32ad [ 39.402227] [<ffffffff9e0f174f>] input_flush_device+0x3d/0x51 [ 39.402234] [<ffffffff9e0f69ae>] evdev_flush+0x49/0x5c [ 39.402243] [<ffffffff9dd62d6e>] filp_close+0x3f/0x65 [ 39.402253] [<ffffffff9dd7dcf7>] put_files_struct+0x66/0xc1 [ 39.402261] [<ffffffff9dd7ddeb>] exit_files+0x47/0x4e [ 39.402270] [<ffffffff9dc6b329>] do_exit+0x483/0x969 [ 39.402278] [<ffffffff9dc73211>] ? recalc_sigpending_tsk+0x3d/0x44 [ 39.402285] [<ffffffff9dc6c7a2>] do_group_exit+0x42/0xb0 [ 39.402293] [<ffffffff9dc767e1>] get_signal+0x58d/0x5bf [ 39.402300] [<ffffffff9dc03701>] do_signal+0x37/0x53e [ 39.402307] [<ffffffff9e0f8401>] ? evdev_ioctl_handler+0xac8/0xb04 [ 39.402314] [<ffffffff9e0f8464>] ? evdev_ioctl+0x10/0x12 [ 39.402321] [<ffffffff9dd74cfa>] ? do_vfs_ioctl+0x42e/0x501 [ 39.402328] [<ffffffff9dc0170e>] prepare_exit_to_usermode+0x66/0x90 [ 39.402333] [<ffffffff9dc0181b>] syscall_return_slowpath+0xe3/0xec [ 39.402339] [<ffffffff9e305b7b>] int_ret_from_sys_call+0x25/0x8f While we could solve this by simply initializing the completion earlier, we are better off rearranging the code a bit so we avoid calling complete() on requests that we did not send out. This patch consolidates marking request slots as free in one place (in uinput_request_submit(), the same place where we acquire them) and having everyone else simply signal completion of the requests. Fixes: 00ce756ce53a ("Input: uinput - mark failed submission requests as free") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-21Input: uinput - avoid FF flush when destroying deviceDmitry Torokhov
Normally, when input device supporting force feedback effects is being destroyed, we try to "flush" currently playing effects, so that the physical device does not continue vibrating (or executing other effects). Unfortunately this does not work well for uinput as flushing of the effects deadlocks with the destroy action: - if device is being destroyed because the file descriptor is being closed, then there is noone to even service FF requests; - if device is being destroyed because userspace sent UI_DEV_DESTROY, while theoretically it could be possible to service FF requests, userspace is unlikely to do so (they'd need to make sure FF handling happens on a separate thread) even if kernel solves the issue with FF ioctls deadlocking with UI_DEV_DESTROY ioctl on udev->mutex. To avoid lockups like the one below, let's install a custom input device flush handler, and avoid trying to flush force feedback effects when we destroying the device, and instead rely on uinput to shut off the device properly. NMI watchdog: Watchdog detected hard LOCKUP on cpu 3 ... <<EOE>> [<ffffffff817a0307>] _raw_spin_lock_irqsave+0x37/0x40 [<ffffffff810e633d>] complete+0x1d/0x50 [<ffffffffa00ba08c>] uinput_request_done+0x3c/0x40 [uinput] [<ffffffffa00ba587>] uinput_request_submit.part.7+0x47/0xb0 [uinput] [<ffffffffa00bb62b>] uinput_dev_erase_effect+0x5b/0x76 [uinput] [<ffffffff815d91ad>] erase_effect+0xad/0xf0 [<ffffffff815d929d>] flush_effects+0x4d/0x90 [<ffffffff815d4cc0>] input_flush_device+0x40/0x60 [<ffffffff815daf1c>] evdev_cleanup+0xac/0xc0 [<ffffffff815daf5b>] evdev_disconnect+0x2b/0x60 [<ffffffff815d74ac>] __input_unregister_device+0xac/0x150 [<ffffffff815d75f7>] input_unregister_device+0x47/0x70 [<ffffffffa00bac45>] uinput_destroy_device+0xb5/0xc0 [uinput] [<ffffffffa00bb2de>] uinput_ioctl_handler.isra.9+0x65e/0x740 [uinput] [<ffffffff811231ab>] ? do_futex+0x12b/0xad0 [<ffffffffa00bb3f8>] uinput_ioctl+0x18/0x20 [uinput] [<ffffffff81241248>] do_vfs_ioctl+0x298/0x480 [<ffffffff81337553>] ? security_file_ioctl+0x43/0x60 [<ffffffff812414a9>] SyS_ioctl+0x79/0x90 [<ffffffff817a04ee>] entry_SYSCALL_64_fastpath+0x12/0x71 Reported-by: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com> Reported-by: Clément VUCHENER <clement.vuchener@gmail.com> Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=193741 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-20Input: adxl34x - do not treat FIFO_MODE() as booleanArnd Bergmann
FIFO_MODE() is a macro expression with a '<<' operator, which gcc points out could be misread as a '<': drivers/input/misc/adxl34x.c: In function 'adxl34x_probe': drivers/input/misc/adxl34x.c:799:36: error: '<<' in boolean context, did you mean '<' ? [-Werror=int-in-bool-context] While utility of this warning is being disputed (Chief Penguin: "This warning is clearly pure garbage.") FIFO_MODE() extracts range of values, with 0 being FIFO_BYPASS, and not something that is logically boolean. This converts the test to an explicit comparison with FIFO_BYPASS, making it clearer to gcc and the reader what is intended. Fixes: e27c729219ad ("Input: add driver for ADXL345/346 Digital Accelerometers") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-19Input: wm97xx: add new AC97 bus supportRobert Jarzmik
This adds support for the new AC97 bus code, which discovers the devices rather than uses platform data. As part of this discovery, it enables a multi-function device wm97xx, which supports touchscreen, battery, ADC and an audio codec. This patch adds the code to bind the touchscreen "cell" as the touchscreen driver. This was tested on the pxa architecture with a pxa270 + wm9713 + the mioa701 touchscreen. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-09-19Input: wm97xx: split out touchscreen registeringRobert Jarzmik
wm97xx-core does several things in it initialization : - touchscreen input device setup - battery device creation As the wm97xx is actually a multi-function device handling an audio codec, a touchscreen, a gpio block and an ADC, reshape the probing to isolate what is truly input/touchscreen specific from the remaining part. This is only code shuffling, there is no functional change. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-09-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull more input updates from Dmitry Torokhov: "A second round of updates for the input subsystem: - a new driver for PWM-controlled vibrators - ucb1400 touchscreen driver had completely busted suspend/resume handling - we now handle "home" button found on some devices with Goodix touchscreens - assorted other fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - add Gigabyte P57 to the keyboard reset table Input: xpad - validate USB endpoint type during probe Input: ucb1400_ts - fix suspend and resume handling Input: edt-ft5x06 - fix access to non-existing register Input: elantech - make arrays debounce_packet static, reduces object code size Input: surface3_spi - make const array header static, reduces object code size Input: goodix - add support for capacitive home button Input: add a driver for PWM controllable vibrators Input: adi - make array seq static, reduces object code size
2017-09-15Merge branch 'next' into for-linusDmitry Torokhov
Prepare second round of input updates for 4.14 merge window.
2017-09-15Input: i8042 - add Gigabyte P57 to the keyboard reset tableKai-Heng Feng
Similar to other Gigabyte laptops, the touchpad on P57 requires a keyboard reset to detect Elantech touchpad correctly. BugLink: https://bugs.launchpad.net/bugs/1594214 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-14dmi: Mark all struct dmi_system_id instances constChristoph Hellwig
... and __initconst if applicable. Based on similar work for an older kernel in the Grsecurity patch. [JD: fix toshiba-wmi build] [JD: add htcpen] [JD: move __initconst where checkscript wants it] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jean Delvare <jdelvare@suse.de>
2017-09-12Input: xpad - validate USB endpoint type during probeCameron Gutman
We should only see devices with interrupt endpoints. Ignore any other endpoints that we find, so we don't send try to send them interrupt URBs and trigger a WARN down in the USB stack. Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Cc: <stable@vger.kernel.org> # c01b5e7464f0 Input: xpad - don't depend on endpoint order Signed-off-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-11Input: ucb1400_ts - fix suspend and resume handlingDmitry Torokhov
Instead of stopping the touchscreen we were starting it in suspend, and disabling it in resume. Fixes: c899afedf168 ("Input: ucb1400_ts - convert to threaded IRQ") Reported-by: Anton Volkov <avolkov@ispras.ru> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-11Input: edt-ft5x06 - fix access to non-existing registerLuca Ceresoli
reg_addr->reg_report_rate is supposed to exist in M06, not M09. The driver is written to skip avoids access to non-existing registers when the register address is NO_REGISTER (0xff). But reg_addr->reg_report_rate is initialized to 0x00 by devm_kzalloc() (in edt_ft5x06_ts_probe()) and not changed thereafter. So the checks do not work and an access to register 0x00 is done. Fix by setting reg_addr->reg_report_rate to NO_REGISTER. Also fix the only place where reg_report_rate is checked against zero instead of NO_REGISTER. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-11Input: elantech - make arrays debounce_packet static, reduces object code sizeColin Ian King
Don't populate the arrays debounce_packet on the stack, instead make them static. Makes the object code smaller by over 870 bytes: Before: text data bss dec hex filename 30553 9152 0 39705 9b19 drivers/input/mouse/elantech.o After: text data bss dec hex filename 29521 9312 0 38833 97b1 drivers/input/mouse/elantech.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-11Input: surface3_spi - make const array header static, reduces object code sizeColin Ian King
Don't populate the const array header on the stack, instead make it static. Makes the object code smaller by over 180 bytes: Before: text data bss dec hex filename 6003 1536 0 7539 1d73 surface3_spi.o After: text data bss dec hex filename 5726 1632 0 7358 1cbe surface3_spi.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-11Input: goodix - add support for capacitive home buttonSergei A. Trusov
On some x86 tablets with a Goodix touchscreen, the Windows logo on the front is a capacitive home button. Touching this button results in a touch with bit 4 of the first byte set, while only the lower 4 bits (0-3) are used to indicate the number of touches. Report a KEY_LEFTMETA press when this happens. Note that the hardware might support more than one button, in which case the "id" byte of coor_data would identify the button in question. This is not implemented as we don't have access to hardware with multiple buttons. Signed-off-by: Sergei A. Trusov <sergei.a.trusov@ya.ru> Acked-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-07Merge tag 'mfd-next-4.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers - RK805 Power Management IC (PMIC) - ROHM BD9571MWV-M MFD Power Management IC (PMIC) - Texas Instruments TPS68470 Power Management IC (PMIC) & LEDs New Device Support: - Add support for HiSilicon Hi6421v530 to hi6421-pmic-core - Add support for X-Powers AXP806 to axp20x - Add support for X-Powers AXP813 to axp20x - Add support for Intel Sunrise Point LPSS to intel-lpss-pci New Functionality: - Amend API to provide register layout; atmel-smc Fix-ups: - DT re-work; omap, nokia - Header file location change {I2C => MFD}; dm355evm_msp, tps65010 - Fix chip ID formatting issue(s); rk808 - Optionally register touchscreen devices; da9052-core - Documentation improvements; twl-core - Constification; rtsx_pcr, ab8500-core, da9055-i2c, da9052-spi - Drop unnecessary static declaration; max8925-i2c - Kconfig changes (missing deps and remove module support) - Slim down oversized licence statement; hi6421-pmic-core - Use managed resources (devm_*); lp87565 - Supply proper error checking/handling; t7l66xb Bug Fixes: - Fix counter duplication issue; da9052-core - Fix potential NULL deference issue; max8998 - Leave SPI-NOR write-protection bit alone; lpc_ich - Ensure device is put into reset during suspend; intel-lpss - Correct register offset variable size; omap-usb-tll" * tag 'mfd-next-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (61 commits) mfd: intel_soc_pmic: Differentiate between Bay and Cherry Trail CRC variants mfd: intel_soc_pmic: Export separate mfd-cell configs for BYT and CHT dt-bindings: mfd: Add bindings for ZII RAVE devices mfd: omap-usb-tll: Fix register offsets mfd: da9052: Constify spi_device_id mfd: intel-lpss: Put I2C and SPI controllers into reset state on suspend mfd: da9055: Constify i2c_device_id mfd: intel-lpss: Add missing PCI ID for Intel Sunrise Point LPSS devices mfd: t7l66xb: Handle return value of clk_prepare_enable mfd: Add ROHM BD9571MWV-M PMIC DT bindings mfd: intel_soc_pmic_chtwc: Turn Kconfig option into a bool mfd: lp87565: Convert to use devm_mfd_add_devices() mfd: Add support for TPS68470 device mfd: lpc_ich: Do not touch SPI-NOR write protection bit on Haswell/Broadwell mfd: syscon: atmel-smc: Add helper to retrieve register layout mfd: axp20x: Use correct platform device ID for many PEK dt-bindings: mfd: axp20x: Introduce bindings for AXP813 mfd: axp20x: Add support for AXP813 PMIC dt-bindings: mfd: axp20x: Add AXP806 to supported list of chips mfd: Add ROHM BD9571MWV-M MFD PMIC driver ...
2017-09-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - a new GPIO bit-banging driver implementing PS/2 protocol - a new power key driver for Rockchip RK805 PMIC - bunch of patches constifying various device ID structures - Elan I2C touchpad driver now supports devices with 2 buttons - other assorted fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (76 commits) Input: byd - make array seq static, reduces object code size Input: xilinx_ps2 - fix multiline comment style Input: pxa27x_keypad - handle return value of clk_prepare_enable Input: tegra-kbc - handle return value of clk_prepare_enable Input: PS/2 gpio bit banging driver for serio bus Input: xen-kbdfront - enable auto repeat for xen keyboard frontend driver Input: ambakmi - constify amba_id Input: atmel_mxt_ts - add support for reset line Input: atmel_mxt_ts - use more managed resources Input: wacom_w8001 - constify serio_device_id Input: tsc40 - constify serio_device_id Input: touchwin - constify serio_device_id Input: touchright - constify serio_device_id Input: touchit213 - constify serio_device_id Input: penmount - constify serio_device_id Input: mtouch - constify serio_device_id Input: inexio - constify serio_device_id Input: hampshire - constify serio_device_id Input: gunze - constify serio_device_id Input: fujitsu_ts - constify serio_device_id ...
2017-09-05Merge tag 'driver-core-4.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here is the "big" driver core update for 4.14-rc1. It's really not all that big, the largest thing here being some firmware tests to help ensure that that crazy api is working properly. There's also a new uevent for when a driver is bound or unbound from a device, fixing a hole in the driver model that's been there since the very beginning. Many thanks to Dmitry for being persistent and pointing out how wrong I was about this all along :) Patches for the new uevents are already in the systemd tree, if people want to play around with them. Otherwise just a number of other small api changes and updates here, nothing major. All of these patches have been in linux-next for a while with no reported issues" * tag 'driver-core-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (28 commits) driver core: bus: Fix a potential double free Do not disable driver and bus shutdown hook when class shutdown hook is set. base: topology: constify attribute_group structures. base: Convert to using %pOF instead of full_name kernfs: Clarify lockdep name for kn->count fbdev: uvesafb: remove DRIVER_ATTR() usage xen: xen-pciback: remove DRIVER_ATTR() usage driver core: Document struct device:dma_ops mod_devicetable: Remove excess description from structured comment test_firmware: add batched firmware tests firmware: enable a debug print for batched requests firmware: define pr_fmt firmware: send -EINTR on signal abort on fallback mechanism test_firmware: add test case for SIGCHLD on sync fallback initcall_debug: add deferred probe times Input: axp20x-pek - switch to using devm_device_add_group() Input: synaptics_rmi4 - use devm_device_add_group() for attributes in F01 Input: gpio_keys - use devm_device_add_group() for attributes driver core: add devm_device_add_group() and friends driver core: add device_{add|remove}_group() helpers ...
2017-09-05Merge branch 'parisc-4.14-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc updates from Helge Deller: "Major changes include: - Full support of the firmware Page Deallocation Table with MADV_HWPOISON and MADV_SOFT_OFFLINE. A kernel thread scans regularily for new bad memory pages. - Full support for self-extracting kernel. - Added UBSAN support. - Lots of section mismatch fixes across all parisc drivers. - Added examples for %pF and %pS usage in printk-formats.txt" * 'parisc-4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: (28 commits) printk-formats.txt: Add examples for %pF and %pS usage parisc: Fix up devices below a PCI-PCI MegaRAID controller bridge parisc/core: Fix section mismatches parisc/ipmi_si_intf: Fix section mismatches on parisc platform parisc/input/hilkbd: Fix section mismatches parisc/net/lasi_82596: Fix section mismatches parisc/serio: Fix section mismatches in gscps2 and hp_sdc drivers parisc: Fix section mismatches in parisc core drivers parisc/parport_gsc: Fix section mismatches parisc/scsi/lasi700: Fix section mismatches parisc/scsi/zalon: Fix section mismatches parisc/8250_gsc: Fix section mismatches parisc/mux: Fix section mismatches parisc/sticore: Fix section mismatches parisc/harmony: Fix section mismatches parisc: Wire up support for self-extracting kernel parisc: Make existing core files reuseable for bootloader parisc: Add core code for self-extracting kernel parisc: Enable UBSAN support parisc/random: Add machine specific randomness ...
2017-09-05Merge branches 'ib-mfd-arm-i2c-4.14', 'ib-mfd-arm-usb-video-4.14', ↵Lee Jones
'ib-mfd-hwmon-4.14', 'ib-mfd-iio-pwm-4.14', 'ib-mfd-input-rtc-4.14', 'ib-mfd-many-4.14' and 'ib-mfd-pinctrl-regulator-4.14' into ibs-for-mfd-merged
generated by cgit (git 2.34.1) at 2025-09-13 09:08:08 +0000