summaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)Author
2010-02-04Input: usbtouchscreen - add NEXIO (or iNexio) supportOndrej Zary
Add support for NEXIO (or iNexio) USB touchscreens to usbtouchscreen driver. Tested with NEX170MRT 17" LCD monitor with integrated touchscreen (with xserver-xorg-input-evtouch 0.8.8-1): T:  Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 54 Spd=12  MxCh= 0 D:  Ver= 1.10 Cls=02(comm.) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1 P:  Vendor=1870 ProdID=0001 Rev= 1.00 S:  Manufacturer=iNexio S:  Product=iNexio USB C:* #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=00 Driver=(none) E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=255ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none) E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms No datasheet is available, this was written by capturing some data with SniffUSB in Windows: http://www.rainbow-software.org/linux_files/nexio/ Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-02-04Input: usbtouchscreen - find input endpoint automaticallyOndrej Zary
Find input enpoint automatically instead of assuming that the first one is OK. This is needed for devices with multiple endpoints such as iNexio where the first endpoint might be output. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-02-04Input: usbtouchscreen - convert from usb_device to usb_interfaceOndrej Zary
Convert usbtouchscreen from storing usb_device to usb_interface. This is needed for multi-interface touchscreen devices such as iNexio. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-31Input: add imx-keypad driver to support the IMX Keypad PortAlberto Panizzo
The IMX family of Application Processors is shipped with a Keypad Port supported by this driver. The peripheral can control up to an 8x8 matrix key pad where all the scanning is done via software. The hardware provides two interrupts: one for key presses (KDI) and one for all key releases (KRI). There is also a simple circuit for glitch reduction (said for synchronization) made by two series of 3 D-latches clocked by the keypad-clock that stabilize the interrupts sources. KDI and KRI are fired only if the respective conditions are maintained for at last 4 keypad-clock cycle. Since those circuits are poor for a correct debounce process (the keypad-clock frequency is 32K and bounces longer than 94us are not masked) the driver, when an interrupt arrives, samples the matrix with a period of 10ms until the readins are stable for IMX_KEYPAD_SCANS_FOR_STABILITY times (currently set at 3). After getting stable result appropriate events are sent through the input stack. If some keys are maintained pressed, the driver continues to scan the matrix with a longer period (60ms) to catch possible multiple key presses without overloading the cpu. This process ends when all keys are released. This driver is tested to build in kernel or as a module and follow the specification of Freescale Application processors: i.MX25 i.MX27 i.MX31 i.MX35 i.MX51 especially tested on i.MX31. Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-30Input: implement input filtersDmitry Torokhov
Sometimes it is desirable to suppress certain events from reaching input handlers and thus user space. One such example is Mac mouse button emulation code which catches certain key presses and converts them into button clicks as if they were emitted by a virtual mouse. The original key press events should be completely suppressed, otherwise user space will be confused, and while keyboard driver does it on its own evdev is blissfully unaware of this arrangement. This patch adds notion of 'filter' to the standard input handlers, which may flag event as filtered thus preventing it from reaching other input handlers. Filters don't (nor will they ever) have a notion of priority relative to each other, input core will run all of them first and any one of them may mark event as filtered. This patch is inspired by similar patch by Matthew Garret but the implementation and intended usage are quite different. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-29Input: uinput - remove BKL from uinput_open functionThadeu Lima de Souza Cascardo
Commit 8702965848ed4bee27486a3e3d2ae34ebba6dd83 pushed down the BKL into uinput open function. However, there's nothing that needs locking in there. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-29Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: update multi-touch protocol documentation Input: add the ABS_MT_PRESSURE event Input: winbond-cir - remove dmesg spam Input: lifebook - add another Lifebook DMI signature Input: ad7879 - support auxiliary GPIOs via gpiolib
2010-01-28Input: wm97xx - provide coordinate logs for accelerated I/OMark Brown
This aids debug of problematic systems. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-28Input: add the ABS_MT_PRESSURE eventHenrik Rydberg
For pressure-based multi-touch devices, a direct way to send sensor intensity data per finger is needed. This patch adds the ABS_MT_PRESSURE event to the MT protocol. Requested-by: Yoonyoung Shim <jy0922.shim@samsung.com> Requested-by: Mika Kuoppala <mika.kuoppala@nokia.com> Requested-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-28Input: winbond-cir - remove dmesg spamDavid Härdeman
I missed converting one dev_info call to deb_dbg before submitting the driver. Without this change, a message will be printed to dmesg for each button press if a RC6 remote is used. Signed-off-by: David Härdeman <david@hardeman.nu> Cc: stable <stable@kernel.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-28Input: lifebook - add another Lifebook DMI signatureJon Dodgson
There are many many ways one can capitalize "Lifebook B Series"... Signed-off-by: Jon Dodgson <crayzeejon@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-28ACPI: replace acpi_integer by u64Lin Ming
acpi_integer is now obsolete and removed from the ACPICA code base, replaced by u64. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-01-24Input: xpad - add rumble support for original xbox controllerBenjamin Valentin
Signed-off-by: Benjamin Valentin <benpicco@zedat.fu-berlin.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-24Input: xilinx_ps2 - use resource_sizeTobias Klauser
Use the resource_size inline function instead of manually calculating the resource size. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: John Linn <john.linn@xilinx.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-21Merge commit 'v2.6.33-rc5' into nextDmitry Torokhov
2010-01-21Input: sh_keysc - add mode 4 and mode 5 supportMagnus Damm
Add Mode 4 and Mode 5 support to the SH_KEYSC driver. These modes allow slightly larger key pad matrixes. While at it, make use of resource_size(). Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-19Input: ADP5588 - add support for ADP5587 devicesMichael Hennerich
The ADP5587 is quite similar to the ADP5588 but features a greater I/O voltage range and lacks the Dual Light Sensor Interface. This new part is also supported by this driver. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-19Input: ad7879 - support auxiliary GPIOs via gpiolibMichael Hennerich
Drop the simple fancy sysfs hooks for the aux GPIOs and expose these via the gpiolib interface so that other drivers can use them. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: sentelic - fix left/right horizontal scroll mapping Input: pmouse - move Sentelic probe down the list Input: add compat support for sysfs and /proc capabilities output Input: i8042 - add Dritek quirk for Acer Aspire 5610. Input: xbox - do not use GFP_KERNEL under spinlock Input: psmouse - fix Synaptics detection when protocol is disabled Input: bcm5974 - report ABS_MT events Input: davinci_keyscan - add device_enable method to platform data Input: evdev - be less aggressive about sending SIGIO notifies Input: atkbd - fix canceling event_work in disconnect Input: serio - fix potential deadlock when unbinding drivers Input: gf2k - fix &&/|| confusion in gf2k_connect()
2010-01-13Input: ep93xx_keypad - cleanup and use matrix_keypad helpersH Hartley Sweeten
Use struct matrix_keymap_data to supply the keymap from the platform code and matrix_keypad_build_keymap() to initialize the keymap. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-13Input: sentelic - fix left/right horizontal scroll mappingTai-hwa Liang
Signed-off-by: Tai-hwa Liang <avatar@sentelic.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-13Input: pmouse - move Sentelic probe down the listTai-hwa Liang
Sentelic probes confuse IBM trackpoints so they stop responding to TP_READ_ID command. See: http://bugzilla.kernel.org/show_bug.cgi?id=14970 Let's move FSP detection lower so it is probed after trackpoint and others, just before we strat probing for Intellimouse Explorer. Signed-off-by: Tai-hwa Liang <avatar@sentelic.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-12Input: add compat support for sysfs and /proc capabilities outputDmitry Torokhov
Input core displays capabilities bitmasks in form of one or more longs printed in hex form and separated by spaces. Unfortunately it does not work well for 32-bit applications running on 64-bit kernels since applications expect that number is "worth" only 32 bits when kernel advances by 64 bits. Fix that by ensuring that output produced for compat tasks uses 32-bit units. Reported-and-tested-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-11Input: make USB device ids constantMárton Németh
The id_table field of the struct usb_device_id is constant in <linux/usb.h> so it makes sense to mark the initialization data also constant. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-11Input: i8042 - add Dritek quirk for Acer Aspire 5610.Elliott Sales de Andrade
Signed-off-by: Elliott Sales de Andrade <quantum.analyst@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-09Input: xbox - do not use GFP_KERNEL under spinlockDmitry Torokhov
xbox_play_effect() is called while holding dev->event_lock with interrupts disabled and thus may not use GFP_KERNEL when submitting urbs. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-09Input: xen-kbdfront - make xenbus device ids constantMárton Németh
The ids field of the struct xenbus_device_id is constant in <linux/xen/xenbus.h> so it makes sense to mark xenkbd_ids also constant. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-09Input: ns558 - make pnp device ids constantMárton Németh
The id_table field of the struct pnp_driver is constant in <linux/pnp.h> so it makes sense to mark pnp_devids also constant. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-09Input: make PCI device ids constantMárton Németh
The id_table field of the struct pci_driver is constant in <linux/pci.h> so it makes sense to mark initialization data also constant. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-09Input: xilinx_ps2 - make Open Firmware device ids constantMárton Németh
The match_table field of the struct of_device_id is constant in <linux/of_platform.h> so it makes sense to mark xps2_of_match also constant. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-09Input: make i2c device ids constantMárton Németh
The id_table field of the struct i2c_driver is defined as constant in <linux/i2c.h> so it makes sense to mark the initialization data also constant. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-07Input: psmouse - fix Synaptics detection when protocol is disabledDaniel Drake
For configurations where Synaptics hardware is present but the Synaptics extensions support is not compiled in, the mouse is reprobed and a new device is allocated on every suspend/resume. During probe, psmouse_switch_protocol() calls psmouse_extensions() with set_properties=1. This calls the dummy synaptics_init() which returns an error code, instructing us not to use the synaptics extensions. During resume, psmouse_reconnect() calls psmouse_extensions() with set_properties=0, in which case call to synaptics_init() is bypassed and PSMOUSE_SYNAPTICS is returned. Since the result is different from previous attempt psmouse_reconnect() fails and full re-probe happens. Fix this by tweaking the set_properties=0 codepath in psmouse_extensions() to be more careful about offering PSMOUSE_SYNAPTICS extensions. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-06Input: elo - switch to using dev_xxx() when printing messagesDmitry Torokhov
Also fix formatting of "switch" statements. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-06Input: atkbd - switch to dev_err() and friendsDmitry Torokhov
dev_err(), dev_warn() and dev_dbg() ensure consistency in driver messages. Also switch to using bool where appropriate and fix some formatting issues. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-06Input: bcm5974 - report ABS_MT eventsHenrik Rydberg
Make bcm5974 report raw multi-touch (MT) data in the form of ABS_MT events. [dtor@mail.ru: get rid of module option, always report all events] Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-06Input: psmouse - remove unused 'autocal' parameter from hgpk protocolDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-06Input: cleanse capabilities bits before registering deviceDmitry Torokhov
To avoid showing garbage in capability bits, zero out bitmasks absent from dev->evbit in case driver inadvertently leaves some garbage there. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-06Input: automatically reset KEY_RESERVED bit for all input devicesDmitry Torokhov
KEY_RESERVED is not supposed to be reported to userspace but rather to mark unused entries in keymaps. Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-06Input: gameport - switch to using pr_xxx() and dev_xxx()Dmitry Torokhov
pr_xxx() and dev_xxx() helpers ensure that all messages emitted by the module have consistent prefixes, so let's use them. Also fix some formatting issues. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-06Input: gameport - make use of list_first_entry() helperDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-06Input: gameport - let device core tell us if device was registeredDmitry Torokhov
No need to keep track of it by ourselves. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-06Input: serio - use pr_xxx() and dev_xxx() helpersDmitry Torokhov
pr_xxx() and dev_xxx() helpers ensure that all messages emitted by the module have consistent prefixes, so let's use them. Also fix some formatting issues. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-06Input: serio - use list_first_entry() helperDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-06Input: serio - let device core tell us if device was registeredDmitry Torokhov
No need to keep track of it by ourselves. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-06Input: serio - use device core to create 'id' attribute groupDmitry Torokhov
Instead of creating 'id' sysfs attribute group by ourselves rely on device core to do that for us. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-06Input: davinci_keyscan - add device_enable method to platform dataMiguel Aguilar
Add a function pointer in the platform data of the DaVinci Keyscan driver called device_enable, in order to perform board specific actions when the device is initialized, like setup the PINMUX configuration. Signed-off-by: Miguel Aguilar <miguel.aguilar@ridgerun.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-06Input: evdev - be less aggressive about sending SIGIO notifiesAdam Jackson
When using realtime signals, we'll enqueue one signal for every event. This is unfortunate, because (for example) keyboard presses are three events: key, msc scancode, and syn. They'll be enqueued fast enough in kernel space that all three events will be ready to read by the time userspace runs, so the first invocation of the signal handler will read all three events, but then the second two invocations still have to run to do no work. Instead, only send the SIGIO notification on syn events. This is a slight abuse of SIGIO semantics, in principle it ought to fire as soon as any events are readable. But it matches evdev semantics, which is more important since SIGIO is rather vaguely defined to begin with. Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-06Input: atkbd - fix canceling event_work in disconnectDmitry Torokhov
We need to first unregister input device and only then cancel event work since events can arrive (and cause event work to get scheduled again) until input_unregister_device() returns. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-06Input: serio - fix potential deadlock when unbinding driversEric W. Biederman
sysfs_remove_group() waits for sysfs attributes to be removed, therefore we do not need to worry about driver-specific attributes being accessed after driver has been detached from the device. In fact, attempts to take serio->drv_mutex in attribute methods may lead to the following deadlock: sysfs_read_file() fill_read_buffer() sysfs_get_active_two() psmouse_attr_show_helper() serio_pin_driver() serio_disconnect_driver() mutex_lock(&serio->drv_mutex); <--------> mutex_lock(&serio_drv_mutex); psmouse_disconnect() sysfs_remove_group(... psmouse_attr_group); .... sysfs_deactivate(); wait_for_completion(); Fix this by removing calls to serio_[un]pin_driver() and functions themselves and using driver-private mutexes to serialize access to attribute's set() methods that may change device state. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-01Input: gf2k - fix &&/|| confusion in gf2k_connect()Roel Kluin
This always evaluates to true. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
generated by cgit (git 2.34.1) at 2025-09-15 07:38:51 +0000