summaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)Author
2016-03-10Input: synaptics-rmi4 - add support for F30Andrew Duggan
RMI4 F30 supports input from clickpad buttons and controls LEDs located on the touchpad PCB. This patch adds support of the clickpad buttons and defers supporting LEDs for the future. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-10Input: synaptics-rmi4 - add support for F12Andrew Duggan
Function 12 implements 2D touch position sensor for newer Synaptics touch devices. It replaces F11 and no device will contain both functions. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Christopher Heiny <cheiny@synaptics.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-10Input: synaptics-rmi4 - add device tree support for 2d sensors and F11Andrew Duggan
2D sensors have several parameter which can be set in the platform data. This patch adds support for getting those values from devicetree. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-10Input: synaptics-rmi4 - add support for 2D sensors and F11Andrew Duggan
RMI4 currently defines two functions for reporting data for 2D sensors (F11 and F12). This patch adds the common functionality which is shared by devices with 2D reporting along with implementing functionality for F11. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Christopher Heiny <cheiny@synaptics.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-10Input: synaptics-rmi4 - add device tree support for RMI4 I2C devicesAndrew Duggan
Add devicetree binding for I2C devices and add bindings for optional parameters in the function drivers. Parameters for function drivers are defined in child nodes for each of the functions. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Acked-by: Rob Herring <robh@kernel.org> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-10Input: synaptics-rmi4 - add I2C transport driverAndrew Duggan
Add the transport driver for devices using RMI4 over I2C. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Christopher Heiny <cheiny@synaptics.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-10Input: synaptics-rmi4 - add support for Synaptics RMI4 devicesAndrew Duggan
Synaptics uses the Register Mapped Interface (RMI) protocol as a communications interface for their devices. This driver adds the core functionality needed to interface with RMI4 devices. RMI devices can be connected to the host via several transport protocols and can supports a wide variety of functionality defined by RMI functions. Support for transport protocols and RMI functions are implemented in individual drivers. The RMI4 core driver uses a bus architecture to facilitate the various combinations of transport and function drivers needed by a particular device. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Christopher Heiny <cheiny@synaptics.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-08Input: ad7879 - add device tree supportStefan Agner
Add device tree support for the I2C and SPI variant of AD7879(-1). This allows to specify the touchscreen controller as a I2C client node or SPI slave device. Most of the options available in platform data are also available as device tree properties, the only exception being GPIO capabilities, which can not be activated through device tree currently. Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-08Input: ad7879 - fix default x/y axis assignmentStefan Agner
The X/Y position measurements read from the controller are interpreted wrong. The first measurement X+ contains the Y position, and the second measurement Y+ the X position (see also Table 11 Register Table in the data sheet). The problem is already known and a swap option has been introduced: commit 6680884a4420 ("Input: ad7879 - add option to correct xy axis") However, the meaning of the new boolean is inverted since the underlying values are already swapped. Let ts->swap_xy set to true actually be the swapped configuration of the two axis. Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-08Input: ad7879 - move header to platform_data directoryStefan Agner
The header file is used by the SPI and I2C variant of the driver. Therefore, move it to a more generic place under platform_data. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-04Input: ts4800 - add hardware dependencyJean Delvare
The Technologic Systems TS-4800 is an i.MX515 board, so its drivers are useless unless building a SOC_IMX51 kernel, except for build testing purposes. Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-04Merge branch 'rotary-encoder' into nextDmitry Torokhov
Bring in updates to roraty encoder driver switching it away from legacy platform data and over to generic device properties and adding support for encoders using more than 2 GPIOs.
2016-03-04Input: cyapa - fix for losing events during device power transitionsDudley Du
When changing the scan rate as part of runtime-resume process we may lose some of the events, because: 1) for gen3 trackpads, the driver must msleep() some time to ensure that the device is ready to accept next command; 2) for gen5 and later trackpads, the queue dumping function will simply ignore the events when waiting for the set power mode command response. The solution is to keep polling and report those valid events when the set power mode command is in progress. Signed-off-by: Dudley Du <dudl@cypress.com> Tested-by: Jeremiah Mahler <jmmahler@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-04Input: sh_keysc - remove dependency on SUPERHSimon Horman
A dependency on ARCH_SHMOBILE seems to be the best option for sh_keysc: * For Super H based SoCs: sh_keysc is used on SH_MIGOR, SH_ECOVEC, SH_KFR2R09, SH_7722_SOLUTION_ENGINE, and SH_7724_SOLUTION_ENGINE, which depend on either CPU_SUBTYPE_SH7722 or CPU_SUBTYPE_SH7724, and both select ARCH_SHMOBILE. * For ARM Based SoCs: Since the removal of legacy (non-multiplatform) support this driver has not been used by any Renesas ARM based SoCs. The Renesas ARM based SoCs currently select ARCH_SHMOBILE, however, it is planned that this will no longer be the case. This is part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS the motivation for which being that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-04Input: melfas_mip4 - add resolution reportingSangwon Jee
Add support for retrieving device resolution (pixels per mm) from firmware and using it when setting up input device. Signed-off-by: Sangwon Jee <jeesw@melfas.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-02Input: rotary-encoder - support more than 2 gpios as inputUwe Kleine-König
This changes how the used gpios are stored (i.e. a struct gpio_descs instead of two struct gpio_desc) and as with >2 gpios the states are numbered differently the function rotary_encoder_get_state returns unencoded numbers instead of grey encoded numbers before. The latter has some implications on how the returned value is used and so the change is bigger than one might expect at first. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-02Input: rotary_encoder - move away from platform data structureDmitry Torokhov
Drop support for platform data passed via a C-structure and switch to device properties instead, which should make the driver compatible with all platforms: OF, ACPI and static boards. Static boards should use property sets to communicate device parameters to the driver. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-02Input: stmpe-ts - restore kerneldocLinus Walleij
commit e4b88e19897f1039fd83f1630517becafc0dd163 "Input: stmpe-ts - enforce device tree only mode" removed platform data but accidentally stripped away useful kerneldoc, so reintroduce it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-02Input: snvs_pwrkey - use __maybe_unused to hide pm functionsArnd Bergmann
The SNVS power key driver has suspend/resume functions that are accessed using SIMPLE_DEV_PM_OPS, which hide the reference when CONFIG_PM_SLEEP is not set, resulting in a warning about unused functions: drivers/input/keyboard/snvs_pwrkey.c:183:12: error: 'imx_snvs_pwrkey_suspend' defined but not used [-Werror=unused-function] drivers/input/keyboard/snvs_pwrkey.c:194:12: error: 'imx_snvs_pwrkey_resume' defined but not used [-Werror=unused-function] This adds __maybe_unused annotations to let the compiler know it can silently drop the function definition. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-02Input: spear-keyboard - use __maybe_unused to hide pm functionsArnd Bergmann
The spear keyboard driver uses #ifdef CONFIG_PM to hide its power management functions, but then uses references from SIMPLE_DEV_PM_OPS that are only present if both CONFIG_PM and CONFIG_PM_SLEEP are set, resulting in a warning about unused functions: drivers/input/keyboard/spear-keyboard.c:292:12: error: 'spear_kbd_suspend' defined but not used [-Werror=unused-function] drivers/input/keyboard/spear-keyboard.c:345:12: error: 'spear_kbd_resume' defined but not used [-Werror=unused-function] This removes the #ifdef and instead uses a __maybe_unused annotation. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-02Input: goldfish_events - enable ACPI-based enumeration for goldfish eventsJason Hu
Add ACPI binding to the goldfish events driver. Signed-off-by: Jason Hu <jia-cheng.hu@intel.com> Signed-off-by: Jin Qian <jinqian@android.com> Signed-off-by: Alan <alan@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-02Input: goldfish_events - add devicetree bindingsGreg Hackmann
Add device tree bindings to the Goldfish virtual platform event driver. Signed-off-by: Greg Hackmann <ghackmann@google.com> Signed-off-by: Jin Qian <jinqian@android.com> Signed-off-by: Alan <alan@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-02Input: rotary_encoder - use input_set_capability()Dmitry Torokhov
Instead of manipulating capability bits directly let's use appropriate helpers. Also there is no need to explicitly set EV_ABS when calling input_set_abs_params(). Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-02Input: rotary_encoder - convert to use gpiod APIDmitry Torokhov
Instead of using old GPIO API, let's switch to GPIOD API, which automatically handles polarity. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-02Input: rotary_encoder - mark PM methods as __maybe_unusedDmitry Torokhov
Instead of guarding PM methods with #ifdef let's mark them as __maybe_unused as it allows for better compile coverage. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-02Input: rotary_encoder - use threaded irqsTimo Teräs
Convert to use threaded IRQs to support GPIOs that can sleep. Protect the irq handler with mutex as it can be triggered from two different irq lines accessing the same state. This allows using GPIO expanders behind I2C or SPI bus. Signed-off-by: Timo Teräs <timo.teras@iki.fi> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-02-17Input: add MELFAS MIP4 Touchscreen driverSangwon Jee
This is an input driver for MELFAS MIP4 Touchscreen devices, such as MMS400, MMS500, MCS8000, MIT200, MIT300, MIT400, MFS10. All devices implementing MIP4 protocol (MELFAS Interface Protocol Version 4) should be supported by this driver. Signed-off-by: Sangwon Jee <jeesw@melfas.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-02-15treewide: Fix typo in printkMasanari Iida
This patch fix spelling typos found in printk and Kconfig. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-02-11Input: touchscreen: Add imx25 TCQ driverMarkus Pargmann
This is a driver for the imx25 ADC/TSC module. It controls the touchscreen conversion queue and creates a touchscreen input device. The driver currently only supports 4 wire touchscreens. The driver uses a simple conversion queue of precharge, touch detection, X measurement, Y measurement, precharge and another touch detection. This driver uses the regmap from the parent to setup some touch specific settings in the core driver and setup a idle configuration with touch detection. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Denis Carikli <denis@eukrea.com> [fix clock's period calculation] [fix calculation of the 'settling' value] Signed-off-by: Juergen Borleis <jbe@pengutronix.de> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-02-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Just small driver fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: colibri-vf50-ts - add missing #include <linux/of.h> Input: adp5589 - fix row 5 handling for adp5589 Input: edt-ft5x06 - fix setting gain, offset, and threshold via device tree Input: vmmouse - fix absolute device registration Input: serio - drop warnings in case of EPROBE_DEFER from serio_find_driver() Input: cap11xx - add missing of_node_put Input: sirfsoc-onkey - allow modular build Input: xpad - remove unused function
2016-02-09Input: colibri-vf50-ts - add missing #include <linux/of.h>Geert Uytterhoeven
drivers/input/touchscreen/colibri-vf50-ts.c: In function ‘vf50_ts_probe’: drivers/input/touchscreen/colibri-vf50-ts.c:302: error: implicit declaration of function ‘of_property_read_u32’ Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-02-09Input: adp5589 - fix row 5 handling for adp5589Lars-Peter Clausen
The adp5589 has row 5, don't skip it when creating the GPIO mapping. Otherwise the pin gets reserved as used and it is not possible to use it as a GPIO. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-02-09Input: edt-ft5x06 - fix setting gain, offset, and threshold via device treePhilipp Zabel
A recent patch broke parsing the gain, offset, and threshold parameters from device tree. Instead of setting the cached values and writing them to the correct registers during probe, it would write the values from DT into the register address variables and never write them to the chip during normal operation. Fixes: 2e23b7a96372 ("Input: edt-ft5x06 - use generic properties API") Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-02-09Input: Allow compile test of Goodix and Colibri VF50 if !GPIOLIBGeert Uytterhoeven
The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. If COMPILE_TEST is enabled, relax the dependency on GPIOLIB for the recently introduced or relaxed symbols TOUCHSCREEN_GOODIX and TOUCHSCREEN_COLIBRI_VF50. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-27Input: byd - add BYD PS/2 touchpad driverChris Diamand
Driver for the BYD BTP10463 touchpad, found in PC Specialist `Lafite' laptops. This patch sends the magic command sequence which causes the touchpad to stream intellimouse-style packets. Gestures are detected inside the touchpad, and exposed as special values in the Z component of each packet - absolute coordinates are not supported, even in the Windows driver. At present, this supports two-finger vertical and horizontal scrolling, and provides the framework to expose the other gestures it can recognize. Signed-off-by: Chris Diamand <chris@diamand.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-27Input: vmmouse - fix absolute device registrationDmitry Torokhov
We should set device's capabilities first, and then register it, otherwise various handlers already present in the kernel will not be able to connect to the device. Reported-by: Lauri Kasanen <cand@gmx.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-27Input: serio - drop warnings in case of EPROBE_DEFER from serio_find_driver()Grygorii Strashko
Now serio_find_driver() will print warnings in case device_attach() returns -EPROBE_DEFER. Those warnings are obsolete, in genral, because: - DD core can report the same if required - since commit 013c074f8642 ("PM / sleep: prohibit devices probing during suspend/hibernation") the devices probing is prohibited during System suspend and deferred device will be carefully reprobed once Resume is finished. Hence, drop warnings in case of EPROBE_DEFER from serio_find_driver(). Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-27Input: cap11xx - add missing of_node_putAmitoj Kaur Chawla
for_each_child_of_node performs an of_node_get on each iteration, so to break out of the loop an of_node_put is required. Found using Coccinelle. Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-27Input: sirfsoc-onkey - allow modular buildArnd Bergmann
CONFIG_INPUT may itself be a loadable module, but the sirf power key driver is listed as 'bool', which makes it possible to select a broken configuration with the driver built-in but the subsystem not loaded. In this configuration, we get a link error: drivers/input/built-in.o: In function `sirfsoc_pwrc_isr': drivers/input/misc/sirfsoc-onkey.c:63: undefined reference to `input_event' drivers/input/built-in.o: In function `sirfsoc_pwrc_isr': include/linux/input.h:414: undefined reference to `input_event' drivers/input/built-in.o: In function `sirfsoc_pwrc_probe': drivers/input/misc/sirfsoc-onkey.c:132: undefined reference to `devm_input_allocate_device' drivers/input/misc/sirfsoc-onkey.c:139: undefined reference to `input_set_capability' drivers/input/misc/sirfsoc-onkey.c:161: undefined reference to `input_register_device' drivers/input/built-in.o: In function `sirfsoc_pwrc_report_event': drivers/input/misc/sirfsoc-onkey.c:48: undefined reference to `input_event' drivers/input/built-in.o: In function `sirfsoc_pwrc_report_event': include/linux/input.h:414: undefined reference to `input_event' drivers/input/built-in.o:(.debug_addr+0x24): undefined reference to `input_event' drivers/input/built-in.o:(.debug_addr+0xbc): undefined reference to `devm_input_allocate_device' drivers/input/built-in.o:(.debug_addr+0x104): undefined reference to `input_set_capability' drivers/input/built-in.o:(.debug_addr+0x128): undefined reference to `input_register_device' This marks the driver as 'tristate' so it becomes possible to have it in a loadable module, mainly to help with randconfig builds. We also have to add a missing semicolon here, which ended up not being needed in built-in mode because the following MODULE_DEVICE_TABLE is an empty macro followed by another semicolon then. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-27Input: xpad - remove unused functionArnd Bergmann
There are two definitions of xpad_identify_controller(), one is used when CONFIG_JOYSTICK_XPAD_LEDS is set, but the other one is empty and never used, and we get a gcc warning about it: drivers/input/joystick/xpad.c:1210:13: warning: 'xpad_identify_controller' defined but not used [-Wunused-function] This removes the second definition. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: cae705baa40b ("Input: xpad - re-send LED command on present event") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-27Input: cyttsp - perform hard reset of the chip during probeOreste Salerno
Since we removed support for calling an init() callback from the platform data, introduce a function which initializes the chip by performing a hard reset, using the reset gpio defined in the device properties. Signed-off-by: Oreste Salerno <oreste.salerno@tomtom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-27Input: cyttsp - switch to using device propertiesOreste Salerno
Drop support for platform data passed via a C-structure and switch to device properties instead, which should make the driver compatible with all platforms: OF, ACPI and static boards. Static boards should use property sets to communicate device parameters to the driver. Signed-off-by: Oreste Salerno <oreste.salerno@tomtom.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-27Input: cyttsp - check return value of input_mt_init_slotsOreste Salerno
Signed-off-by: Oreste Salerno <oreste.salerno@tomtom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-27Input: cyttsp - use devres managed resource allocationsOreste Salerno
Use devm_() functions for allocating memory, input device and IRQ. Signed-off-by: Oreste Salerno <oreste.salerno@tomtom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull more input updates from Dmitry Torokhov: "The second round of updates for the input subsystem, mainly changes to xpad driver to better hanlde Xbox One controllers" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: gpio-keys - allow disabling individual buttons in DT Input: gpio-keys - allow setting input device name in DT Input: xpad - correct xbox one pad device name Input: atmel_mxt_ts - improve touchscreen size/orientation handling Input: xpad - use LED API when identifying wireless controllers Input: xpad - workaround dead irq_out after suspend/ resume Input: xpad - update Xbox One Force Feedback Support Input: xpad - correctly handle concurrent LED and FF requests Input: xpad - handle "present" and "gone" correctly Input: xpad - remove spurious events of wireless xpad 360 controller
2016-01-21Merge branch 'next' into for-linusDmitry Torokhov
Prepare second round of input updates for 4.5 merge window.
2016-01-20Merge tag 'armsoc-multiplatform' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC multiplatform code updates from Arnd Bergmann: "This branch is the culmination of 5 years of effort to bring the ARMv6 and ARMv7 platforms together such that they can all be enabled and boot the same kernel. It has been a tremendous amount of cleanup and refactoring by a huge number of people, and creation of several new (and major) subsystems to better abstract out all the platform details in an appropriate manner. The bulk of this branch is a large patchset from Arnd that brings several of the more minor and older platforms we have closer to multiplatform support. Among these are MMP, S3C64xx, Orion5x, mv78xx0 and realview Much of this is moving around header files from old mach directories, but there are also some cleanup patches of debug_ll (lowlevel debug per-platform options) and other parts. Linus Walleij also has some patchs to clean up the older ARM Realview platforms by finally introducing DT support, and Rob Herring has some for ARM Versatile which is now DT-only. Both of these platforms are now multiplatform. Finally, a couple of patches from Russell for Dove PMU, and a fix from Valentin Rothberg for Exynos ADC, which were rebased on top of the series to avoid conflicts" * tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits) ARM: realview: don't select SMP_ON_UP for UP builds ARM: s3c: simplify s3c_irqwake_{e,}intallow definition ARM: s3c64xx: fix pm-debug compilation iio: exynos-adc: fix irqf_oneshot.cocci warnings ARM: realview: build realview-dt SMP support only when used ARM: realview: select apropriate targets ARM: realview: clean up header files ARM: realview: make all header files local ARM: no longer make CPU targets visible separately ARM: integrator: use explicit core module options ARM: realview: enable multiplatform ARM: make default platform work for NOMMU ARM: debug-ll: move DEBUG_LL_UART_EFM32 to correct Kconfig location ARM: defconfig: use correct debug_ll settings ARM: versatile: convert to multi-platform ARM: versatile: merge mach code into a single file ARM: versatile: switch to DT only booting and remove legacy code ARM: versatile: add DT based PCI detection ARM: pxa: mark ezx structures as __maybe_unused ARM: pxa: mark raumfeld init functions as __maybe_unused ...
2016-01-18Input: rotary_encoder - convert to devm-* apiTimo Teräs
Use managed resource API for simplifying error paths. Signed-off-by: Timo Teräs <timo.teras@iki.fi> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-17Merge tag 'gpio-v4.5-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "Here is the bulk of GPIO changes for v4.5. Notably there are big refactorings mostly by myself, aimed at getting the gpio_chip into a shape that makes me believe I can proceed to preserve state for a proper userspace ABI (character device) that has already been proposed once, but resulted in the feedback that I need to go back and restructure stuff. So I've been restructuring stuff. On the way I ran into brokenness (return code from the get_value() callback) and had to fix it. Also, refactored generic GPIO to be simpler. Some of that is still waiting to trickle down from the subsystems all over the kernel that provide random gpio_chips, I've touched every single GPIO driver in the kernel now, oh man I didn't know I was responsible for so much... Apart from that we're churning along as usual. I took some effort to test and retest so it should merge nicely and we shook out a couple of bugs in -next. Infrastructural changes: - In struct gpio_chip, rename the .dev node to .parent to better reflect the fact that this is not the GPIO struct device abstraction. We will add that soon so this would be totallt confusing. - It was noted that the driver .get_value() callbacks was sometimes reporting negative -ERR values to the gpiolib core, expecting them to be propagated to consumer gpiod_get_value() and gpio_get_value() calls. This was not happening, so as there was a mess of drivers returning negative errors and some returning "anything else than zero" to indicate that a line was active. As some would have bit 31 set to indicate "line active" it clashed with negative error codes. This is fixed by the largeish series clamping values in all drivers with !!value to [0,1] and then augmenting the code to propagate error codes to consumers. (Includes some ACKed patches in other subsystems.) - Add a void *data pointer to struct gpio_chip. The container_of() design pattern is indeed very nice, but we want to reform the struct gpio_chip to be a non-volative, stateless business, and keep states internal to the gpiolib to be able to hold on to the state when adding a proper userspace ABI (character device) further down the road. To achieve this, drivers need a handle at the internal state that is not dependent on their struct gpio_chip() so we add gpiochip_add_data() and gpiochip_get_data() following the pattern of many other subsystems. All the "use gpiochip data pointer" patches transforms drivers to this scheme. - The Generic GPIO chip header has been merged into the general <linux/gpio/driver.h> header, and the custom header for that removed. Instead of having a separate mm_gpio_chip struct for these generic drivers, merge that into struct gpio_chip, simplifying the code and removing the need for separate and confusing includes. Misc improvements: - Stabilize the way GPIOs are looked up from the ACPI legacy specification. - Incremental driver features for PXA, PCA953X, Lantiq (patches from the OpenWRT community), RCAR, Zynq, PL061, 104-idi-48 New drivers: - Add a GPIO chip to the ALSA SoC AC97 driver. - Add a new Broadcom NSP SoC driver (this lands in the pinctrl dir, but the branch is merged here too to account for infrastructural changes). - The sx150x driver now supports the sx1502" * tag 'gpio-v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (220 commits) gpio: generic: make bgpio_pdata always visible gpiolib: fix chip order in gpio list gpio: mpc8xxx: Do not use gpiochip_get_data() in mpc8xxx_gpio_save_regs() gpio: mm-lantiq: Do not use gpiochip_get_data() in ltq_mm_save_regs() gpio: brcmstb: Allow building driver for BMIPS_GENERIC gpio: brcmstb: Set endian flags for big-endian MIPS gpio: moxart: fix build regression gpio: xilinx: Do not use gpiochip_get_data() in xgpio_save_regs() leds: pca9532: use gpiochip data pointer leds: tca6507: use gpiochip data pointer hid: cp2112: use gpiochip data pointer bcma: gpio: use gpiochip data pointer avr32: gpio: use gpiochip data pointer video: fbdev: via: use gpiochip data pointer gpio: pch: Optimize pch_gpio_get() Revert "pinctrl: lantiq: Implement gpio_chip.to_irq" pinctrl: nsp-gpio: use gpiochip data pointer pinctrl: vt8500-wmt: use gpiochip data pointer pinctrl: exynos5440: use gpiochip data pointer pinctrl: at91-pio4: use gpiochip data pointer ...
2016-01-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - new driver for eGalaxTouch serial touchscreen - new driver for TS-4800 touchscreen - an update for Goodix touchscreen driver - PS/2 mouse module was reworked to limit number of protocols we try on pass-through ports to speed up their detection time - wacom_w8001 touchscreen driver now reports pen and touch via separate instances of input devices - other driver changes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (42 commits) Input: elantech - mark protocols v2 and v3 as semi-mt Input: wacom_w8001 - drop use of ABS_MT_TOOL_TYPE Input: gpio-keys - fix check for disabling unsupported keys Input: omap-keypad - remove dead check Input: ti_am335x_tsc - fix HWPEN interrupt handling Input: omap-keypad - set tasklet data earlier Input: rohm_bu21023 - fix handling of retrying firmware update Input: ALPS - report v3 pinnacle trackstick device only if is present Input: ALPS - detect trackstick presence for v7 protocol Input: pcap_ts - use to_delayed_work Input: bma150 - constify bma150_cfg structure Input: i8042 - add Fujitsu Lifebook U745 to the nomux list Input: egalax_ts_serial - fix potential NULL dereference on error Input: uinput - sanity check on ff_effects_max and EV_FF Input: uinput - rework ABS validation Input: uinput - add new UINPUT_DEV_SETUP and UI_ABS_SETUP ioctl Input: goodix - use "inverted_[xy]" flags instead of "rotated_screen" Input: goodix - add axis swapping and axis inversion support Input: goodix - use goodix_i2c_write_u8 instead of i2c_master_send Input: goodix - add power management support ...
generated by cgit (git 2.34.1) at 2025-09-14 01:08:22 +0000