summaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)Author
2021-03-27Input: imx_keypad - convert to a DT-only driverFabio Estevam
i.MX has been converted to a DT-only platform, so make the adjustments to the driver to convert it to a DT-only driver. Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20210327194307.541248-1-festevam@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: elan_i2c - fix a typo in parameter nameNikolai Kostrigin
s/max_baseliune/max_baseline/ Signed-off-by: Nikolai Kostrigin <nickel@altlinux.org> Link: https://lore.kernel.org/r/20210311114146.1977616-1-nickel@altlinux.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: move to use request_irq by IRQF_NO_AUTOEN flagBarry Song
disable_irq() after request_irq() still has a time gap in which interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will disable IRQ auto-enable because of requesting. On the other hand, request_irq() after setting IRQ_NOAUTOEN as below irq_set_status_flags(irq, IRQ_NOAUTOEN); request_irq(dev, irq...); can also be replaced by request_irq() with IRQF_NO_AUTOEN flag. Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Link: https://lore.kernel.org/r/20210302224916.13980-3-song.bao.hua@hisilicon.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Merge tag 'v5.12-rc4' into nextDmitry Torokhov
Sync up with the mainline to bring in newest APIs.
2021-03-25Input: cyttsp - verbose error on soft resetLinus Walleij
The first thing the Cypress driver does when starting up is to try a soft reset. This is the first point where the driver SPI/I2C communication can fail, so put out some nice debug text: cyttsp-spi spi2.0: failed to send soft reset Instead of just: cyttsp-spi: probe of spi2.0 failed with error -5 This is more helpful. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210322221349.1116666-1-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: iqs5xx - make reset GPIO optionalJeff LaBundy
The device's hardware reset pin is only required if the platform must be able to update the device's firmware. As such, demote the reset GPIO to optional in support of devices that ship with pre-programmed firmware and don't route the reset pin back to the SoC. In that case, the 'fw_file' attribute is hidden because there is no way to open the bootloader. The logic is extended to the case in which the device does not advertise bootloader support in the first place. Last but not least, remove the hardware reset performed at probe because there is no reason to reset the device manually. A power on reset function already ensures a clean reset at start-up. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20210323021006.367-1-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: Add support for Azoteq IQS626AJeff LaBundy
This patch adds support for the Azoteq IQS626A capacitive touch controller. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20210301234928.4298-5-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: touchscreen - broaden use-cases described in commentsJeff LaBundy
Now that the helper functions have been moved to drivers/input/ so that all input devices may use them, the introductory comments can be updated to remove any implication that the helper functions are solely limited to touchscreens. This patch also scrubs any remaining use of 'DT' since there isn't any actual dependency on OF. A minor spelling error is resolved as well ('setups' -> 'sets up'). Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20210301234928.4298-3-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: touchscreen - move helper functions to coreJeff LaBundy
Some devices outside of drivers/input/touchscreen/ can still make use of the touchscreen helper functions. Therefore, it was agreed in [1] to move them outside of drivers/input/touchscreen/ so that other devices can call them without INPUT_TOUCHSCREEN being set. As part of this change, 'of' is dropped from the filename because the helpers no longer actually use OF. No changes are made to the file contents whatsoever. Based on the feedback in [2], the corresponding binding documents (touchscreen.yaml and touchscreen.txt) are left in their original locations. [1] https://patchwork.kernel.org/patch/11924029/ [2] https://patchwork.kernel.org/patch/12042037/ Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20210301234928.4298-2-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: wacom_i2c - switch to using managed resourcesDmitry Torokhov
This simplifies error unwinding path and allows us to get rid of remove() method. Reviewed-by: Alistair Francis <alistair@alistair23.me> Link: https://lore.kernel.org/r/20210321220043.318239-2-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: wacom_i2c - do not force interrupt triggerDmitry Torokhov
Instead of forcing interrupt trigger to "level low" rely on the platform to set it up according to how it is wired on the given board. Reviewed-by: Alistair Francis <alistair@alistair23.me> Link: https://lore.kernel.org/r/20210321220043.318239-1-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: iqs5xx - close bootloader using hardware resetJeff LaBundy
The bootloader can be closed using the 'execute' command (0x02) or hardware reset. Rather than using the former option for successful firmware update procedures and reserving the latter for recovering the device upon failure, simply use hardware reset for all cases. The post-bootloader initialization delay increases marginally when triggered by a hardware reset, so increase the wait time to ensure the device does not subsequently fail to respond. As part of this change, refactor the return path to avoid an extra assignment and to make the logic a bit smaller. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20210313191236.4366-6-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: iqs5xx - remove superfluous revision validationJeff LaBundy
The vendor-assigned firmware project number is restricted to the generic project number (15); however the vendor may assign other project numbers to specific applications and customers. These custom project numbers may be based on forwards-compatible firmware revision 1.x. However, the driver unnecessarily rejects anything older than firmware revision 2.0. To support other applications, remove these unnecessarily strict checks and enter the bootloader only for truly incompatible A000 devices. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20210313191236.4366-5-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: iqs5xx - expose firmware revision to user spaceJeff LaBundy
Add the read-only 'fw_info' attribute which reports information about the device's firmware in the following format: a.b.c.d:e.f Where: a = Product number (e.g. 40 for IQS550) b = Project number (e.g. 15) c = Firmware revision (major) d = Firmware revision (minor) e = Customer-assigned exported file version (major) f = Customer-assigned exported file version (minor) As part of the corresponding rework to uses of 'bl_status', the IQS5XX_BL_STATUS_RESET definition is dropped with 0 used in its place instead. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20210313191236.4366-4-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: iqs5xx - optimize axis definition and validationJeff LaBundy
Set the maximum ABS_MT_PRESSURE value and use the existing U16_MAX definition instead of a magic number to validate ABS_MT_POSITION_X and ABS_MT_POSITION_Y. Also use input_set_abs_params() rather than input_abs_set_max() to avoid having to call input_set_capability() separately. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20210313191236.4366-3-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: iqs5xx - update vendor's URLJeff LaBundy
Replace 'http' with 'https' and correct the spelling of the nearby word 'datasheet'. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20210313191236.4366-2-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: silead - fix a typoBhaskar Chowdhury
s/subsytem/subsystem/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20210322022030.3857089-1-unixbhaskar@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: gpio-keys - use hrtimer for software debounce, if possiblePaul Cercueil
We want to be able to report the input event as soon as the debounce delay elapsed. However, the current code does not really ensure that, as it uses the jiffies-based schedule_delayed_work() API. With a small enough HZ value (HZ <= 100), this results in some input events being lost, when a key is quickly pressed then released (on a human's time scale). Switching to hrtimers fixes this issue, and will work even on extremely low HZ values (tested at HZ=24). This is however only possible if reading the GPIO is possible without sleeping. If this condition is not met, the previous approach of using a jiffies-based timer is taken. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20210307222240.380583-3-paul@crapouillou.net Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: gpio-keys - use hrtimer for release timerPaul Cercueil
Dealing with input, timing is important; if the button should be released in one millisecond, then it should be done in one millisecond and not a hundred milliseconds. Therefore, the standard timer API is not really suitable for this task. Convert the gpio-keys driver to use a hrtimer instead of the standard timer to address this issue. Note that by using a hard IRQ for the hrtimer callback, we can get rid of the spin_lock_irqsave() and spin_unlock_irqrestore(). Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20210307222240.380583-2-paul@crapouillou.net Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: gpio-keys - remove extra call to input_syncPaul Cercueil
The input_sync() function is already called after the loop in gpio_keys_report_state(), so it does not need to be called after each iteration within gpio_keys_gpio_report_event(). Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20210307222240.380583-1-paul@crapouillou.net Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: max8997 - simplify open coding of a division using up to 64 divisionsUwe Kleine-König
The for loop is just a complicate way to express a division. Replace it by the actual division which is both simpler to understand for a human and more efficient for a CPU to calculate. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Link: https://lore.kernel.org/r/20210316212233.50765-1-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-23Input: nspire-keypad - enable interrupts only when openedFabian Vogt
The driver registers an interrupt handler in _probe, but didn't configure them until later when the _open function is called. In between, the keypad can fire an IRQ due to touchpad activity, which the handler ignores. This causes the kernel to disable the interrupt, blocking the keypad from working. Fix this by disabling interrupts before registering the handler. Additionally, disable them in _close, so that they're only enabled while open. Fixes: fc4f31461892 ("Input: add TI-Nspire keypad support") Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de> Link: https://lore.kernel.org/r/3383725.iizBOSrK1V@linux-e202.suse.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-23Input: i8042 - fix Pegatron C15B ID entryArnd Bergmann
The Zenbook Flip entry that was added overwrites a previous one because of a typo: In file included from drivers/input/serio/i8042.h:23, from drivers/input/serio/i8042.c:131: drivers/input/serio/i8042-x86ia64io.h:591:28: error: initialized field overwritten [-Werror=override-init] 591 | .matches = { | ^ drivers/input/serio/i8042-x86ia64io.h:591:28: note: (near initialization for 'i8042_dmi_noselftest_table[0].matches') Add the missing separator between the two. Fixes: b5d6e7ab7fe7 ("Input: i8042 - add ASUS Zenbook Flip to noselftest list") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Marcos Paulo de Souza <mpdesouza@suse.com> Link: https://lore.kernel.org/r/20210323130623.2302402-1-arnd@kernel.org Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-22input: raspberrypi-ts: Release firmware handle when not neededNicolas Saenz Julienne
There is no use for the firmware interface after getting the touch buffer address, so release it. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
2021-03-20Input: atmel_mxt_ts - support wakeup methodsDmitry Osipenko
According to datasheets, chips like mXT1386 have a WAKE line, it is used to wake the chip up from deep sleep mode before communicating with it via the I2C-compatible interface. If the WAKE line is connected to a GPIO line, the line must be asserted 25 ms before the host attempts to communicate with the controller. If the WAKE line is connected to the SCL pin, the controller will send a NACK on the first attempt to address it, the host must then retry 25 ms later. Implement the wake-up methods in the driver. Touchscreen now works properly on devices like Acer A500 tablet, fixing problems like this: atmel_mxt_ts 0-004c: __mxt_read_reg: i2c transfer failed (-121) atmel_mxt_ts 0-004c: mxt_bootloader_read: i2c recv failed (-121) atmel_mxt_ts 0-004c: Trying alternate bootloader address atmel_mxt_ts 0-004c: mxt_bootloader_read: i2c recv failed (-121) atmel_mxt_ts: probe of 0-004c failed with error -121 Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20210302102158.10533-3-digetx@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-20Input: lpc32xx_ts - convert to use BIT()edison.jiang
There is error from cppcheck tool. "Shifting signed 32-bit value by 31 bits is undefined behaviour errors" Signed-off-by: edison.jiang <jiangzhipeng@yulong.com> Link: https://lore.kernel.org/r/20210316153150.1207-1-jzp0409@163.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-19Input: ims-pcu - drop redundant driver-data assignmentJohan Hovold
The driver data for the data interface has already been set by usb_driver_claim_interface() so drop the subsequent redundant assignment. Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210318155525.22496-1-johan@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-17module: remove never implemented MODULE_SUPPORTED_DEVICELeon Romanovsky
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was implemented. We can safely remove it, because the kernel has grown to have many more reliable mechanisms to determine if device is supported or not. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-15Input: tsc2007 - make use of device propertiesAndy Shevchenko
Device property API allows to gather device resources from different sources, such as ACPI. Convert the drivers to unleash the power of device property API. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20210314210951.645783-2-andy.shevchenko@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-15Input: tsc2007 - convert to GPIO descriptorsAndy Shevchenko
This converts the driver to use GPIO descriptors. Note that it now uses logical polarity and thus nagation has been dropped. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20210314210951.645783-1-andy.shevchenko@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-10input: atc260x: Add onkey driver for ATC260x PMICsCristian Ciocaltea
The Actions Semi ATC260x PMICs are able to manage an onkey button. This driver exposes the ATC260x onkey as an input device. It can also be configured to force a system reset on a long key-press with an adjustable duration. The currently supported chip variants are ATC2603C and ATC2609A. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-03-09Input: n64joy - fix return value check in n64joy_probe()Wei Yongjun
In case of error, the function devm_platform_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: 3bdffa8ffb45 ("Input: Add N64 controller driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Lauri Kasanen <cand@gmx.com> Link: https://lore.kernel.org/r/20210308122856.2177071-1-weiyongjun1@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-09Input: elan_i2c - reduce the resume time for new devicesJingle Wu
Newer controllers, such as Voxel, Delbin, Magple, Bobba and others, do not need to be reset after issuing power-on command, and skipping reset saves at least 100ms from resume time. Note that if first attempt of re-initializing device fails we will not be skipping reset on the subsequent ones. Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw> Link: https://lore.kernel.org/r/20210226073537.4926-1-jingle.wu@emc.com.tw Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-07Input: exc3000 - add type sysfs attributeLucas Stach
Add a sysfs attribute to query the type of the touchscreen device. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Link: https://lore.kernel.org/r/20210125182527.1225245-5-l.stach@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-07Input: exc3000 - fix firmware version query for device in bootloaderLucas Stach
If the device is stuck in bootloader (maybe due to blank or corrupted application firmware) it won't answer a query for the firmware version. Fall back to returning the bootloader version in that case. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Link: https://lore.kernel.org/r/20210125182527.1225245-4-l.stach@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-07Input: exc3000 - factor out vendor data requestLucas Stach
Factor out the vendor data i2c request handling to make it reusable for other functions. Also don't cache the model and firmware version string in the device private data as we never use the cached version, but always read from the device. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Link: https://lore.kernel.org/r/20210125182527.1225245-3-l.stach@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-07Input: exc3000 - split MT event handling from IRQ handlerLucas Stach
Split out the multitouch event handling into its own function to allow other events to be handled in the IRQ handler without disturbing the MT handling. Now that things are separated a bit more, stop treating vendor data requests special by cehcking for a locked mutex, but just look at the event ID to figure out if the message is a MT report or a vendor data query reply. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Link: https://lore.kernel.org/r/20210125182527.1225245-2-l.stach@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-07Input: s6sy761 - fix coordinate read bit shiftCaleb Connolly
The touch coordinate register contains the following: byte 3 byte 2 byte 1 +--------+--------+ +-----------------+ +-----------------+ | | | | | | | | X[3:0] | Y[3:0] | | Y[11:4] | | X[11:4] | | | | | | | | +--------+--------+ +-----------------+ +-----------------+ Bytes 2 and 1 need to be shifted left by 4 bits, the least significant nibble of each is stored in byte 3. Currently they are only being shifted by 3 causing the reported coordinates to be incorrect. This matches downstream examples, and has been confirmed on my device (OnePlus 7 Pro). Fixes: 0145a7141e59 ("Input: add support for the Samsung S6SY761 touchscreen") Signed-off-by: Caleb Connolly <caleb@connolly.tech> Reviewed-by: Andi Shyti <andi@etezian.org> Link: https://lore.kernel.org/r/20210305185710.225168-1-caleb@connolly.tech Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-02-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Mostly existing driver fixes plus a new driver for game controllers directly connected to Nintendo 64, and an enhancement for keyboards driven by Chrome OS EC to communicate layout of the top row to userspace" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (47 commits) Input: st1232 - fix NORMAL vs. IDLE state handling Input: aiptek - convert sysfs sprintf/snprintf family to sysfs_emit Input: alps - fix spelling of "positive" ARM: dts: cros-ec-keyboard: Use keymap macros dt-bindings: input: Fix the keymap for LOCK key dt-bindings: input: Create macros for cros-ec keymap Input: cros-ec-keyb - expose function row physical map to userspace dt-bindings: input: cros-ec-keyb: Add a new property describing top row Input: applespi - fix occasional crc errors under load. Input: applespi - don't wait for responses to commands indefinitely. Input: st1232 - add IDLE state as ready condition Input: zinitix - fix return type of zinitix_init_touch() Input: i8042 - add ASUS Zenbook Flip to noselftest list Input: add missing dependencies on CONFIG_HAS_IOMEM Input: joydev - prevent potential read overflow in ioctl Input: elo - fix an error code in elo_connect() Input: xpad - add support for PowerA Enhanced Wired Controller for Xbox Series X|S Input: sur40 - fix an error code in sur40_probe() Input: elants_i2c - detect enum overflow Input: zinitix - remove unneeded semicolon ...
2021-02-23Input: st1232 - fix NORMAL vs. IDLE state handlingGeert Uytterhoeven
NORMAL (0x0) and IDLE (0x4) are really two different states. Hence you cannot check for both using a bitmask, as that checks for IDLE only, breaking operation for devices that are in NORMAL state. Fix the wait function to report either state as ready. Fixes: 6524d8eac258452e ("Input: st1232 - add IDLE state as ready condition") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Michael Tretter <m.tretter@pengutronix.de> Link: https://lore.kernel.org/r/20210223090201.1430542-1-geert+renesas@glider.be Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-02-22Merge branch 'next' into for-linusDmitry Torokhov
Prepare input updates for 5.12 merge window.
2021-02-22Input: aiptek - convert sysfs sprintf/snprintf family to sysfs_emitJiapeng Chong
Fix the following coccicheck warning: ./drivers/input/tablet/aiptek.c:1629:8-16: WARNING: use scnprintf or sprintf. Reported-by: Abaci Robot<abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/1612419191-1078-1-git-send-email-jiapeng.chong@linux.alibaba.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-02-22Input: alps - fix spelling of "positive"Bhaskar Chowdhury
s/postive/positive/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20210222075439.32201-1-unixbhaskar@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-02-22Input: cros-ec-keyb - expose function row physical map to userspacePhilip Chen
The top-row keys in a keyboard usually have dual functionalities. E.g. A function key "F1" is also an action key "Browser back". Therefore, when an application receives an action key code from a top-row key press, the application needs to know how to correlate the action key code with the function key code and do the conversion whenever necessary. Since the userpace already knows the key scanlines (row/column) associated with a received key code. Essentially, the userspace only needs a mapping between the key row/column and the matching physical location in the top row. So, enhance the cros-ec-keyb driver to create such a mapping and expose it to userspace in the form of a function_row_physmap attribute. The attribute would be a space separated ordered list of row/column codes for the keys in the function row, in a left-to-right order. The attribute will only be present when the device has a custom design for the top-row keys. Signed-off-by: Philip Chen <philipchen@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20210115122412.v7.2.I6542d7d9d0b246e7079bb16b41e697b2ac4b4e39@changeid Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-02-22Merge tag 'v5.11' into nextDmitry Torokhov
Merge with mainline to get latest APIs and device tree bindings.
2021-02-22Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: - Generalise byte swapping assembly - Update debug addresses for STI - Validate start of physical memory with DTB - Do not clear SCTLR.nTLSMD in decompressor - amba/locomo/sa1111 devices remove method return type is void - address markers for KASAN in page table dump * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9065/1: OABI compat: fix build when EPOLL is not enabled ARM: 9055/1: mailbox: arm_mhuv2: make remove callback return void amba: Make use of bus_type functions amba: Make the remove callback return void vfio: platform: simplify device removal amba: reorder functions amba: Fix resource leak for drivers without .remove ARM: 9054/1: arch/arm/mm/mmu.c: Remove duplicate header ARM: 9053/1: arm/mm/ptdump:Add address markers for KASAN regions ARM: 9051/1: vdso: remove unneded extra-y addition ARM: 9050/1: Kconfig: Select ARCH_HAVE_NMI_SAFE_CMPXCHG where possible ARM: 9049/1: locomo: make locomo bus's remove callback return void ARM: 9048/1: sa1111: make sa1111 bus's remove callback return void ARM: 9047/1: smp: remove unused variable ARM: 9046/1: decompressor: Do not clear SCTLR.nTLSMD for ARMv7+ cores ARM: 9045/1: uncompress: Validate start of physical memory against passed DTB ARM: 9042/1: debug: no uncompress debugging while semihosting ARM: 9041/1: sti LL_UART: add STiH418 SBC UART0 support ARM: 9040/1: use DEBUG_UART_PHYS and DEBUG_UART_VIRT for sti LL_UART ARM: 9039/1: assembler: generalize byte swapping macro into rev_l
2021-02-22Merge branch 'devel-stable' into for-linusRussell King
2021-02-21Merge tag 'sound-5.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "A relatively calm release at this time, and no massive code changes are found in the stats, while a wide range of code refactoring and cleanup have been done. Note that this update includes the tree-wide trivial changes for dropping the return value from ISA remove callbacks, too. Below lists up some highlight: ALSA Core: - Support for the software jack injection via debugfs - Fixes for sync_stop PCM operations HD-audio and USB-audio: - A few usual HD-audio device quirks - Updates for Tegra HD-audio - More quirks for Pioneer and other USB-audio devices - Stricter state checks at USB-audio disconnection ASoC: - Continued code refactoring, cleanup and fixes in ASoC core API - A KUnit testsuite for the topology code - Lots of ASoC Intel driver Realtek codec updates, quirk additions and fixes - Support for Ingenic JZ4760(B), Intel AlderLake-P, DT configured nVidia cards, Qualcomm lpass-rx-macro and lpass-tx-macro - Removal of obsolete SIRF prima/atlas, Txx9 and ZTE zx drivers Others: - Drop return value from ISA driver remove callback - Cleanup with DIV_ROUND_UP() macro - FireWire updates, HDSP output loopback support" * tag 'sound-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (322 commits) ALSA: hda: intel-dsp-config: add Alder Lake support ASoC: soc-pcm: fix hw param limits calculation for multi-DAI ASoC: Intel: bytcr_rt5640: Add quirk for the Acer One S1002 tablet ASoC: Intel: bytcr_rt5651: Add quirk for the Jumper EZpad 7 tablet ASoC: Intel: bytcr_rt5640: Add quirk for the Voyo Winpad A15 tablet ASoC: Intel: bytcr_rt5640: Add quirk for the Estar Beauty HD MID 7316R tablet ASoC: soc-pcm: fix hwparams min/max init for dpcm ALSA: hda/realtek: Quirk for HP Spectre x360 14 amp setup ALSA: usb-audio: Add implicit fb quirk for BOSS GP-10 ALSA: hda: Add another CometLake-H PCI ID ASoC: soc-pcm: add soc_pcm_hw_update_format() ASoC: soc-pcm: add soc_pcm_hw_update_chan() ASoC: soc-pcm: add soc_pcm_hw_update_rate() ASoC: wm_adsp: Remove unused control callback structure ASoC: SOF: relax ABI checks and avoid unnecessary warnings ASoC: codecs: lpass-tx-macro: add dapm widgets and route ASoC: codecs: lpass-tx-macro: add support for lpass tx macro ASoC: qcom: dt-bindings: add bindings for lpass tx macro codec ASoC: codecs: lpass-rx-macro: add iir widgets ASoC: codecs: lpass-rx-macro: add dapm widgets and route ...
2021-02-20Merge tag 'tty-5.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big set of tty/serial driver changes for 5.12-rc1. Nothing huge, just lots of good cleanups and additions: - n_tty line discipline cleanups - vt core cleanups and reworks to make the code more "modern" - stm32 driver additions - tty led support added to the tty core and led layer - minor serial driver fixups and additions All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (54 commits) serial: core: Remove BUG_ON(in_interrupt()) check vt_ioctl: Remove in_interrupt() check dt-bindings: serial: imx: Switch to my personal address vt: keyboard, use new API for keyboard_tasklet serial: stm32: improve platform_get_irq condition handling in init_port serial: ifx6x60: Remove driver for deprecated platform tty: fix up iterate_tty_read() EOVERFLOW handling tty: fix up hung_up_tty_read() conversion tty: fix up hung_up_tty_write() conversion tty: teach the n_tty ICANON case about the new "cookie continuations" too tty: teach n_tty line discipline about the new "cookie continuations" tty: clean up legacy leftovers from n_tty line discipline tty: implement read_iter tty: convert tty_ldisc_ops 'read()' function to take a kernel pointer serial: remove sirf prima/atlas driver serial: mxs-auart: Remove <asm/cacheflush.h> serial: mxs-auart: Remove serial_mxs_probe_dt() serial: fsl_lpuart: Use of_device_get_match_data() dt-bindings: serial: renesas,hscif: Add r8a779a0 support tty: serial: Drop unused efm32 serial driver ...
2021-02-19Input: applespi - fix occasional crc errors under load.Ronald Tschalär
For some reason, when the system is under heavy CPU load, the read following the write sometimes occurs unusually quickly, resulting in the read data not being quite ready and hence a bad packet getting read. Adding another delay after reading the status message appears to fix this. Signed-off-by: Ronald Tschalär <ronald@innovation.ch> Link: https://lore.kernel.org/r/20210217190718.11035-2-ronald@innovation.ch Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit (git 2.34.1) at 2025-09-14 21:30:29 +0000