| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
"Core iommufd dependencies from Jason:
- Change the iommufd fault handle into an always present hwpt handle
in the domain
- Give iommufd its own SW_MSI implementation along with some IRQ
layer rework
- Improvements to the handle attach API
Core fixes for probe-issues from Robin
Intel VT-d changes:
- Checking for SVA support in domain allocation and attach paths
- Move PCI ATS and PRI configuration into probe paths
- Fix a pentential hang on reboot -f
- Miscellaneous cleanups
AMD-Vi changes:
- Support for up to 2k IRQs per PCI device function
- Set of smaller fixes
ARM-SMMU changes:
- SMMUv2 devicetree binding updates for Qualcomm implementations
(QCS8300 GPU and MSM8937)
- Clean up SMMUv2 runtime PM implementation to help with wider rework
of pm_runtime_put_autosuspend()
Rockchip driver changes:
- Driver adjustments for recent DT probing changes
S390 IOMMU changes:
- Support for IOMMU passthrough
Apple Dart changes:
- Driver adjustments to meet ISP device requirements
- Null-ptr deref fix
- Disable subpage protection for DART 1"
* tag 'iommu-updates-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (54 commits)
iommu/vt-d: Fix possible circular locking dependency
iommu/vt-d: Don't clobber posted vCPU IRTE when host IRQ affinity changes
iommu/vt-d: Put IRTE back into posted MSI mode if vCPU posting is disabled
iommu: apple-dart: fix potential null pointer deref
iommu/rockchip: Retire global dma_dev workaround
iommu/rockchip: Register in a sensible order
iommu/rockchip: Allocate per-device data sensibly
iommu/mediatek-v1: Support COMPILE_TEST
iommu/amd: Enable support for up to 2K interrupts per function
iommu/amd: Rename DTE_INTTABLEN* and MAX_IRQS_PER_TABLE macro
iommu/amd: Replace slab cache allocator with page allocator
iommu/amd: Introduce generic function to set multibit feature value
iommu: Don't warn prematurely about dodgy probes
iommu/arm-smmu: Set rpm auto_suspend once during probe
dt-bindings: arm-smmu: Document QCS8300 GPU SMMU
iommu: Get DT/ACPI parsing into the proper probe path
iommu: Keep dev->iommu state consistent
iommu: Resolve ops in iommu_init_device()
iommu: Handle race with default domain setup
iommu: Unexport iommu_fwspec_free()
...
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Nested virtualization support for VGICv3, giving the nested
hypervisor control of the VGIC hardware when running an L2 VM
- Removal of 'late' nested virtualization feature register masking,
making the supported feature set directly visible to userspace
- Support for emulating FEAT_PMUv3 on Apple silicon, taking advantage
of an IMPLEMENTATION DEFINED trap that covers all PMUv3 registers
- Paravirtual interface for discovering the set of CPU
implementations where a VM may run, addressing a longstanding issue
of guest CPU errata awareness in big-little systems and
cross-implementation VM migration
- Userspace control of the registers responsible for identifying a
particular CPU implementation (MIDR_EL1, REVIDR_EL1, AIDR_EL1),
allowing VMs to be migrated cross-implementation
- pKVM updates, including support for tracking stage-2 page table
allocations in the protected hypervisor in the 'SecPageTable' stat
- Fixes to vPMU, ensuring that userspace updates to the vPMU after
KVM_RUN are reflected into the backing perf events
LoongArch:
- Remove unnecessary header include path
- Assume constant PGD during VM context switch
- Add perf events support for guest VM
RISC-V:
- Disable the kernel perf counter during configure
- KVM selftests improvements for PMU
- Fix warning at the time of KVM module removal
x86:
- Add support for aging of SPTEs without holding mmu_lock.
Not taking mmu_lock allows multiple aging actions to run in
parallel, and more importantly avoids stalling vCPUs. This includes
an implementation of per-rmap-entry locking; aging the gfn is done
with only a per-rmap single-bin spinlock taken, whereas locking an
rmap for write requires taking both the per-rmap spinlock and the
mmu_lock.
Note that this decreases slightly the accuracy of accessed-page
information, because changes to the SPTE outside aging might not
use atomic operations even if they could race against a clear of
the Accessed bit.
This is deliberate because KVM and mm/ tolerate false
positives/negatives for accessed information, and testing has shown
that reducing the latency of aging is far more beneficial to
overall system performance than providing "perfect" young/old
information.
- Defer runtime CPUID updates until KVM emulates a CPUID instruction,
to coalesce updates when multiple pieces of vCPU state are
changing, e.g. as part of a nested transition
- Fix a variety of nested emulation bugs, and add VMX support for
synthesizing nested VM-Exit on interception (instead of injecting
#UD into L2)
- Drop "support" for async page faults for protected guests that do
not set SEND_ALWAYS (i.e. that only want async page faults at CPL3)
- Bring a bit of sanity to x86's VM teardown code, which has
accumulated a lot of cruft over the years. Particularly, destroy
vCPUs before the MMU, despite the latter being a VM-wide operation
- Add common secure TSC infrastructure for use within SNP and in the
future TDX
- Block KVM_CAP_SYNC_REGS if guest state is protected. It does not
make sense to use the capability if the relevant registers are not
available for reading or writing
- Don't take kvm->lock when iterating over vCPUs in the suspend
notifier to fix a largely theoretical deadlock
- Use the vCPU's actual Xen PV clock information when starting the
Xen timer, as the cached state in arch.hv_clock can be stale/bogus
- Fix a bug where KVM could bleed PVCLOCK_GUEST_STOPPED across
different PV clocks; restrict PVCLOCK_GUEST_STOPPED to kvmclock, as
KVM's suspend notifier only accounts for kvmclock, and there's no
evidence that the flag is actually supported by Xen guests
- Clean up the per-vCPU "cache" of its reference pvclock, and instead
only track the vCPU's TSC scaling (multipler+shift) metadata (which
is moderately expensive to compute, and rarely changes for modern
setups)
- Don't write to the Xen hypercall page on MSR writes that are
initiated by the host (userspace or KVM) to fix a class of bugs
where KVM can write to guest memory at unexpected times, e.g.
during vCPU creation if userspace has set the Xen hypercall MSR
index to collide with an MSR that KVM emulates
- Restrict the Xen hypercall MSR index to the unofficial synthetic
range to reduce the set of possible collisions with MSRs that are
emulated by KVM (collisions can still happen as KVM emulates
Hyper-V MSRs, which also reside in the synthetic range)
- Clean up and optimize KVM's handling of Xen MSR writes and
xen_hvm_config
- Update Xen TSC leaves during CPUID emulation instead of modifying
the CPUID entries when updating PV clocks; there is no guarantee PV
clocks will be updated between TSC frequency changes and CPUID
emulation, and guest reads of the TSC leaves should be rare, i.e.
are not a hot path
x86 (Intel):
- Fix a bug where KVM unnecessarily reads XFD_ERR from hardware and
thus modifies the vCPU's XFD_ERR on a #NM due to CR0.TS=1
- Pass XFD_ERR as the payload when injecting #NM, as a preparatory
step for upcoming FRED virtualization support
- Decouple the EPT entry RWX protection bit macros from the EPT
Violation bits, both as a general cleanup and in anticipation of
adding support for emulating Mode-Based Execution Control (MBEC)
- Reject KVM_RUN if userspace manages to gain control and stuff
invalid guest state while KVM is in the middle of emulating nested
VM-Enter
- Add a macro to handle KVM's sanity checks on entry/exit VMCS
control pairs in anticipation of adding sanity checks for secondary
exit controls (the primary field is out of bits)
x86 (AMD):
- Ensure the PSP driver is initialized when both the PSP and KVM
modules are built-in (the initcall framework doesn't handle
dependencies)
- Use long-term pins when registering encrypted memory regions, so
that the pages are migrated out of MIGRATE_CMA/ZONE_MOVABLE and
don't lead to excessive fragmentation
- Add macros and helpers for setting GHCB return/error codes
- Add support for Idle HLT interception, which elides interception if
the vCPU has a pending, unmasked virtual IRQ when HLT is executed
- Fix a bug in INVPCID emulation where KVM fails to check for a
non-canonical address
- Don't attempt VMRUN for SEV-ES+ guests if the vCPU's VMSA is
invalid, e.g. because the vCPU was "destroyed" via SNP's AP
Creation hypercall
- Reject SNP AP Creation if the requested SEV features for the vCPU
don't match the VM's configured set of features
Selftests:
- Fix again the Intel PMU counters test; add a data load and do
CLFLUSH{OPT} on the data instead of executing code. The theory is
that modern Intel CPUs have learned new code prefetching tricks
that bypass the PMU counters
- Fix a flaw in the Intel PMU counters test where it asserts that an
event is counting correctly without actually knowing what the event
counts on the underlying hardware
- Fix a variety of flaws, bugs, and false failures/passes
dirty_log_test, and improve its coverage by collecting all dirty
entries on each iteration
- Fix a few minor bugs related to handling of stats FDs
- Add infrastructure to make vCPU and VM stats FDs available to tests
by default (open the FDs during VM/vCPU creation)
- Relax an assertion on the number of HLT exits in the xAPIC IPI test
when running on a CPU that supports AMD's Idle HLT (which elides
interception of HLT if a virtual IRQ is pending and unmasked)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (216 commits)
RISC-V: KVM: Optimize comments in kvm_riscv_vcpu_isa_disable_allowed
RISC-V: KVM: Teardown riscv specific bits after kvm_exit
LoongArch: KVM: Register perf callbacks for guest
LoongArch: KVM: Implement arch-specific functions for guest perf
LoongArch: KVM: Add stub for kvm_arch_vcpu_preempted_in_kernel()
LoongArch: KVM: Remove PGD saving during VM context switch
LoongArch: KVM: Remove unnecessary header include path
KVM: arm64: Tear down vGIC on failed vCPU creation
KVM: arm64: PMU: Reload when resetting
KVM: arm64: PMU: Reload when user modifies registers
KVM: arm64: PMU: Fix SET_ONE_REG for vPMC regs
KVM: arm64: PMU: Assume PMU presence in pmu-emul.c
KVM: arm64: PMU: Set raw values from user to PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR}
KVM: arm64: Create each pKVM hyp vcpu after its corresponding host vcpu
KVM: arm64: Factor out pKVM hyp vcpu creation to separate function
KVM: arm64: Initialize HCRX_EL2 traps in pKVM
KVM: arm64: Factor out setting HCRX_EL2 traps into separate function
KVM: x86: block KVM_CAP_SYNC_REGS if guest state is protected
KVM: x86: Add infrastructure for secure TSC
KVM: x86: Push down setting vcpu.arch.user_set_tsc
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq driver updates from Thomas Gleixner:
- Support for hard indices on RISC-V. The hart index identifies a hart
(core) within a specific interrupt domain in RISC-V's Priviledged
Architecture.
- Rework of the RISC-V MSI driver
This moves the driver over to the generic MSI library and solves the
affinity problem of unmaskable PCI/MSI controllers. Unmaskable
PCI/MSI controllers are prone to lose interrupts when the MSI message
is updated to change the affinity because the message write consists
of three 32-bit subsequent writes, which update address and data. As
these writes are non-atomic versus the device raising an interrupt,
the device can observe a half written update and issue an interrupt
on the wrong vector. This is mitiated by a carefully orchestrated
step by step update and the observation of an eventually pending
interrupt on the CPU which issues the update. The algorithm follows
the well established method of the X86 MSI driver.
- A new driver for the RISC-V Sophgo SG2042 MSI controller
- Overhaul of the Renesas RZQ2L driver
Simplification of the probe function by using devm_*() mechanisms,
which avoid the endless list of error prone gotos in the failure
paths.
- Expand the Renesas RZV2H driver to support RZ/G3E SoCs
- A workaround for Rockchip 3568002 erratum in the GIC-V3 driver to
ensure that the addressing is limited to the lower 32-bit of the
physical address space.
- Add support for the Allwinner AS23 NMI controller
- Expand the IMX irqsteer driver to handle up to 960 input interrupts
- The usual small updates, cleanups and device tree changes
* tag 'irq-drivers-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
irqchip/imx-irqsteer: Support up to 960 input interrupts
irqchip/sunxi-nmi: Support Allwinner A523 NMI controller
dt-bindings: irq: sun7i-nmi: Document the Allwinner A523 NMI controller
irqchip/davinci-cp-intc: Remove public header
irqchip/renesas-rzv2h: Add RZ/G3E support
irqchip/renesas-rzv2h: Update macros ICU_TSSR_TSSEL_{MASK,PREP}
irqchip/renesas-rzv2h: Update TSSR_TIEN macro
irqchip/renesas-rzv2h: Add field_width to struct rzv2h_hw_info
irqchip/renesas-rzv2h: Add max_tssel to struct rzv2h_hw_info
irqchip/renesas-rzv2h: Add struct rzv2h_hw_info with t_offs variable
irqchip/renesas-rzv2h: Use devm_pm_runtime_enable()
irqchip/renesas-rzv2h: Use devm_reset_control_get_exclusive_deasserted()
irqchip/renesas-rzv2h: Simplify rzv2h_icu_init()
irqchip/renesas-rzv2h: Drop irqchip from struct rzv2h_icu_priv
irqchip/renesas-rzv2h: Fix wrong variable usage in rzv2h_tint_set_type()
dt-bindings: interrupt-controller: renesas,rzv2h-icu: Document RZ/G3E SoC
riscv: sophgo: dts: Add msi controller for SG2042
irqchip: Add the Sophgo SG2042 MSI interrupt controller
dt-bindings: interrupt-controller: Add Sophgo SG2042 MSI
arm64: dts: rockchip: rk356x: Move PCIe MSI to use GIC ITS instead of MBI
...
|
|
'rockchip', 's390', 'core', 'intel/vt-d' and 'amd/amd-vi' into next
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/drivers
Amlogic drivers changes for v6.15:
- GPIO interrupt controller support for Amlogic A4 and A5 SoCs
* tag 'amlogic-drivers-for-v6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
irqchip: Add support for Amlogic A4 and A5 SoCs
dt-bindings: interrupt-controller: Add support for Amlogic A4 and A5 SoCs
Link: https://lore.kernel.org/r/eeaa8d3b-4fc3-4dae-92b8-0fc590e1a070@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
* kvm-arm64/nv-vgic:
: NV VGICv3 support, courtesy of Marc Zyngier
:
: Support for emulating the GIC hypervisor controls and managing shadow
: VGICv3 state for the L1 hypervisor. As part of it, bring in support for
: taking IRQs to the L1 and UAPI to manage the VGIC maintenance interrupt.
KVM: arm64: nv: Fail KVM init if asking for NV without GICv3
KVM: arm64: nv: Allow userland to set VGIC maintenance IRQ
KVM: arm64: nv: Fold GICv3 host trapping requirements into guest setup
KVM: arm64: nv: Propagate used_lrs between L1 and L0 contexts
KVM: arm64: nv: Request vPE doorbell upon nested ERET to L2
KVM: arm64: nv: Respect virtual HCR_EL2.TWx setting
KVM: arm64: nv: Add Maintenance Interrupt emulation
KVM: arm64: nv: Handle L2->L1 transition on interrupt injection
KVM: arm64: nv: Nested GICv3 emulation
KVM: arm64: nv: Sanitise ICH_HCR_EL2 accesses
KVM: arm64: nv: Plumb handling of GICv3 EL2 accesses
KVM: arm64: nv: Add ICH_*_EL2 registers to vpcu_sysreg
KVM: arm64: nv: Load timer before the GIC
arm64: sysreg: Add layout for ICH_MISR_EL2
arm64: sysreg: Add layout for ICH_VTR_EL2
arm64: sysreg: Add layout for ICH_HCR_EL2
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The Amlogic A4 SoCs support 12 GPIO IRQ lines and 2 AO GPIO IRQ lines,
A5 SoCs support 12 GPIO IRQ lines, details are as below.
A4 IRQ Number:
- 72:55 18 pins on bank T
- 54:32 23 pins on bank X
- 31:16 16 pins on bank D
- 15:14 2 pins on bank E
- 13:0 14 pins on bank B
A4 AO IRQ Number:
- 7 1 pin on bank TESTN
- 6:0 7 pins on bank AO
A5 IRQ Number:
- 98 1 pin on bank TESTN
- 97:82 16 pins on bank Z
- 81:62 20 pins on bank X
- 61:48 14 pins on bank T
- 47:32 16 pins on bank D
- 31:27 5 pins on bank H
- 26:25 2 pins on bank E
- 24:14 11 pins on bank C
- 13:0 14 pins on bank B
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20250311-irqchip-gpio-a4-a5-v5-2-ca4cc276c18c@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
The irqsteer IP routes groups of input interrupts to a dedicated system
interrupt per group. Each group handles 64 input interrupts.
The current driver is limited to 8 groups, i.e. 512 input interrupts, which
is sufficient for the existing i.MX SoCs. The upcoming i.MX94 family
extends the irqsteer IP to 15 groups, i.e. 960 interrupts.
Extending the group limit to 15 enables this, but the new SoCs are not
guaranteed to utilize all 15 groups. Unused groups have no mapping for the
underlying output interrupt, which makes the probe function fail as it
expects a valid mapping for each group output.
Remove this limitation and stop the mapping loop, when no valid mapping is
detected.
[ tglx: Massage change log ]
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/all/20250305095522.2177843-1-ping.bai@nxp.com
|
|
The NMI controller in the Allwinner A523 is almost compatible to the
previous versions of this IP, but requires the extra bit 31 to be set in
the enable register to actually report the NMI.
Add a mask to allow such an enable bit to be specified, and add this to
the per-SoC data structure. As this struct was just for different register
offsets so far, it was consequently named "reg_offs", which is now no
longer applicable, so rename this to the more generic "data" on the way,
and move the existing offsets into a struct of its own.
Also add the respective Allwinner A523 compatible string, and set bit 31
in its enable mask, to add support for this SoC.
[ tglx: Mop up some coding style along with it ]
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250307005712.16828-7-andre.przywara@arm.com
|
|
There are no more users of irq-davinci-cp-intc.h (da830.c doesn't use
any of its symbols). Remove the header and make the driver stop using the
config structure.
[ tglx: Mop up coding style ]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250304131815.86549-1-brgl@bgdev.pl
|
|
The ICH_HCR_EL2-related macros are missing a number of control
bits that we are about to handle. Take this opportunity to fully
describe the layout of that register as part of the automatic
generation infrastructure.
This results in a bit of churn, unfortunately.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250225172930.1850838-2-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The ICU block on the RZ/G3E SoC is almost identical to the one found on
the RZ/V2H SoC, with the following differences:
- The TINT register base offset is 0x800 instead of zero.
- The number of GPIO interrupts for TINT selection is 141 instead of 86.
- The pin index and TINT selection index are not in the 1:1 map.
- The number of TSSR registers is 16 instead of 8.
- Each TSSR register can program 2 TINTs instead of 4 TINTs.
Add support for the RZ/G3E driver by filling the rzv2h_hw_info table and
adding LUT for mapping between pin index and TINT selection index.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/all/20250224131253.134199-13-biju.das.jz@bp.renesas.com
|
|
On RZ/G3E, TSSEL register field is 8 bits wide compared to 7 on RZ/V2H.
Also bits 8..14 is reserved on RZ/G3E and any writes on these reserved
bits is ignored.
Use bitmask GENMASK(field_width - 2, 0) on both SoCs for extracting TSSEL
and then update the macros ICU_TSSR_TSSEL_PREP and ICU_TSSR_TSSEL_MASK for
supporting both SoCs.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/all/20250224131253.134199-12-biju.das.jz@bp.renesas.com
|
|
On RZ/G3E, TIEN bit position is at 15 compared to 7 on RZ/V2H. Replace the
macro ICU_TSSR_TIEN(n)->ICU_TSSR_TIEN(n, _field_width) for supporting both
these SoCs.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/all/20250224131253.134199-11-biju.das.jz@bp.renesas.com
|
|
On RZ/G3E the field width for TSSR register for a TINT is 16 compared to 8
on the RZ/V2H.
Add field_width to struct rzv2h_hw_info and replace the macros ICU_TSSR_K
and ICU_TSSR_TSSEL_N by a runtime evaluation:
(32 / field_width) provides the number of tints in the TSSR register.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/all/20250224131253.134199-10-biju.das.jz@bp.renesas.com
|
|
The number of GPIO interrupts on RZ/G3E for TINT selection is 141 compared
to 86 on RZ/V2H. Rename the macro ICU_PB5_TINT->ICU_RZV2H_TSSEL_MAX_VAL to
hold this difference for RZ/V2H.
Add max_tssel to struct rzv2h_hw_info and replace the hardcoded constants
in the code.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/all/20250224131253.134199-9-biju.das.jz@bp.renesas.com
|
|
The ICU block on the RZ/G3E SoC is almost identical to the one found on
the RZ/V2H SoC, with the following differences:
- The TINT register base offset is 0x800 instead of zero.
- The number of GPIO interrupts for TINT selection is 141 instead of 86.
- The pin index and TINT selection index are not in the 1:1 map
- The number of TSSR registers is 16 instead of 8
- Each TSSR register can program 2 TINTs instead of 4 TINTs
Introduce struct rzv2h_hw_info to describe the SoC properties and refactor
the code by moving rzv2h_icu_init() into rzv2h_icu_init_common() and pass
the variable containing hw difference to support both these SoCs.
As a first step add t_offs to the new struct and replace the hardcoded
constants in the code.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/all/20250224131253.134199-8-biju.das.jz@bp.renesas.com
|
|
Simplify rzv2h_icu_init() by using devm_pm_runtime_enable().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/all/20250224131253.134199-7-biju.das.jz@bp.renesas.com
|
|
Use devm_reset_control_get_exclusive_deasserted() to simplify
rzv2h_icu_init().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/all/20250224131253.134199-6-biju.das.jz@bp.renesas.com
|
|
Use devm_add_action_or_reset() for calling put_device in error path of
rzv2h_icu_init() to simplify the code by using the recently added devm_*
helpers.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/all/20250224131253.134199-5-biju.das.jz@bp.renesas.com
|
|
Use rzv2h_icu_chip directly on irq_domain_set_hwirq_and_chip() and drop
the global variable irqchip from struct rzv2h_icu_priv.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/all/20250224131253.134199-4-biju.das.jz@bp.renesas.com
|
|
The variable tssel_n is used for selecting TINT source and titsel_n for
setting the interrupt type. The variable titsel_n is wrongly used for
enabling the TINT interrupt in rzv2h_tint_set_type(). Fix this issue by
using the correct variable tssel_n.
While at it, move the tien variable assignment near to tssr.
Fixes: 0d7605e75ac2 ("irqchip: Add RZ/V2H(P) Interrupt Control Unit (ICU) driver")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250224131253.134199-3-biju.das.jz@bp.renesas.com
Closes: https://lore.kernel.org/CAMuHMdU3xJpz-jh=j7t4JreBat2of2ksP_OR3+nKAoZBr4pSxg@mail.gmail.com
|
|
Add driver for Sophgo SG2042 MSI interrupt controller.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Inochi Amaoto <inochiama@gmail.com>
Link: https://lore.kernel.org/all/3104216ca90a5f532bafb676c1c5b1efb19e94d1.1740535748.git.unicorn_wang@outlook.com
|
|
Add an interrupt controller driver for MSI-X Interrupt Peripheral (MIP)
hardware block found in BCM2712. The interrupt controller is used to
handle MSI-X interrupts from peripherials behind PCIe endpoints like
RPi1 south bridge found in RPi5.
There are two MIPs on BCM2712, the first has 64 consecutive SPIs
assigned to 64 output vectors, and the second has 17 SPIs, but only
8 of them are consecutive starting at the 8th output vector.
Signed-off-by: Stanimir Varbanov <svarbanov@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Ivan T. Ivanov <iivanov@suse.de>
Link: https://lore.kernel.org/r/20250224083559.47645-4-svarbanov@suse.de
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
Currently, IRQ_MSI_IOMMU is selected if DMA_IOMMU is available to provide
an implementation for iommu_dma_prepare/compose_msi_msg(). However, it'll
make more sense for irqchips that call prepare/compose to select it, and
that will trigger all the additional code and data to be compiled into
the kernel.
If IRQ_MSI_IOMMU is selected with no IOMMU side implementation, then the
prepare/compose() will be NOP stubs.
If IRQ_MSI_IOMMU is not selected by an irqchip, then the related code on
the iommu side is compiled out.
Link: https://patch.msgid.link/r/a2620f67002c5cdf974e89ca3bf905f5c0817be6.1740014950.git.nicolinc@nvidia.com
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The two-step process to translate the MSI address involves two functions,
iommu_dma_prepare_msi() and iommu_dma_compose_msi_msg().
Previously iommu_dma_compose_msi_msg() needed to be in the iommu layer as
it had to dereference the opaque cookie pointer. Now, the previous patch
changed the cookie pointer into an integer so there is no longer any need
for the iommu layer to be involved.
Further, the call sites of iommu_dma_compose_msi_msg() all follow the same
pattern of setting an MSI message address_hi/lo to non-translated and then
immediately calling iommu_dma_compose_msi_msg().
Refactor iommu_dma_compose_msi_msg() into msi_msg_set_addr() that directly
accepts the u64 version of the address and simplifies all the callers.
Move the new helper to linux/msi.h since it has nothing to do with iommu.
Aside from refactoring, this logically prepares for the next patch, which
allows multiple implementation options for iommu_dma_prepare_msi(). So, it
does not make sense to have the iommu_dma_compose_msi_msg() in dma-iommu.c
as it no longer provides the only iommu_dma_prepare_msi() implementation.
Link: https://patch.msgid.link/r/eda62a9bafa825e9cdabd7ddc61ad5a21c32af24.1740014950.git.nicolinc@nvidia.com
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Rockchip RK3566/RK3568 GIC600 integration has DDR addressing
limited to the first 32bit of physical address space. Rockchip
assigned Erratum ID #3568002 for this issue. Add driver quirk for
this Rockchip GIC Erratum.
Note, that the 0x0201743b GIC600 ID is not Rockchip-specific and is
common for many ARM GICv3 implementations. Hence, there is an extra
of_machine_is_compatible() check.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/all/20250216221634.364158-2-dmitry.osipenko@collabora.com
|
|
On X1E80100, there is a hardware bug in the register logic of the
IRQ_ENABLE_BANK register: While read accesses work on the normal address,
all write accesses must be made to a shifted address. Without a workaround
for this, the wrong interrupt gets enabled in the PDC and it is impossible
to wakeup from deep suspend (CX collapse). This has not caused problems so
far, because the deep suspend state was not enabled. A workaround is
required now since work is ongoing to fix this.
The PDC has multiple "DRV" regions, each one has a size of 0x10000 and
provides the same set of registers for a particular client in the system.
Linux is one the clients and uses DRV region 2 on X1E. Each "bank" inside
the DRV region consists of 32 interrupt pins that can be enabled using the
IRQ_ENABLE_BANK register:
IRQ_ENABLE_BANK[bank] = base + IRQ_ENABLE_BANK + bank * sizeof(u32)
On X1E, this works as intended for read access. However, write access to
most banks is shifted by 2:
IRQ_ENABLE_BANK_X1E[0] = IRQ_ENABLE_BANK[-2]
IRQ_ENABLE_BANK_X1E[1] = IRQ_ENABLE_BANK[-1]
IRQ_ENABLE_BANK_X1E[2] = IRQ_ENABLE_BANK[0] = IRQ_ENABLE_BANK[2 - 2]
IRQ_ENABLE_BANK_X1E[3] = IRQ_ENABLE_BANK[1] = IRQ_ENABLE_BANK[3 - 2]
IRQ_ENABLE_BANK_X1E[4] = IRQ_ENABLE_BANK[2] = IRQ_ENABLE_BANK[4 - 2]
IRQ_ENABLE_BANK_X1E[5] = IRQ_ENABLE_BANK[5] (this one works as intended)
The negative indexes underflow to banks of the previous DRV/client region:
IRQ_ENABLE_BANK_X1E[drv 2][bank 0] = IRQ_ENABLE_BANK[drv 2][bank -2]
= IRQ_ENABLE_BANK[drv 1][bank 5-2]
= IRQ_ENABLE_BANK[drv 1][bank 3]
= IRQ_ENABLE_BANK[drv 1][bank 0 + 3]
IRQ_ENABLE_BANK_X1E[drv 2][bank 1] = IRQ_ENABLE_BANK[drv 2][bank -1]
= IRQ_ENABLE_BANK[drv 1][bank 5-1]
= IRQ_ENABLE_BANK[drv 1][bank 4]
= IRQ_ENABLE_BANK[drv 1][bank 1 + 3]
Introduce a workaround for the bug by matching the qcom,x1e80100-pdc
compatible and apply the offsets as shown above:
- Bank 0...1: previous DRV region, bank += 3
- Bank 1...4: our DRV region, bank -= 2
- Bank 5: our DRV region, no fixup required
The PDC node in the device tree only describes the DRV region for the Linux
client, but the workaround also requires to map parts of the previous DRV
region to issue writes there. To maintain compatibility with old device
trees, obtain the base address of the preceeding region by applying the
-0x10000 offset. Note that this is also more correct from a conceptual
point of view:
It does not really make use of the other region; it just issues shifted
writes that end up in the registers of the Linux associated DRV region 2.
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/all/20250218-x1e80100-pdc-hw-wa-v2-1-29be4c98e355@linaro.org
|
|
Devices, which have a non-atomic MSI update, might see an intermediate
state when changing the target IMSIC vector from one CPU to another.
To avoid losing interrupts due to this intermediate state, do the following
just like x86 APIC:
1) First write a temporary IMSIC vector to the device which has the same
MSI address as the old IMSIC vector and MSI data pointing to the new
IMSIC vector.
2) Next write the new IMSIC vector to the device.
Based on the above, the __imsic_local_sync() must check pending status of
both old MSI data and new MSI data on the old CPU. In addition, the
movement of IMSIC vector for non-atomic device MSI update must be done in
interrupt context using IRQCHIP_MOVE_DEFERRED.
Implememnt the logic and enforce the chip flag for PCI/MSI[X].
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250217085657.789309-11-apatel@ventanamicro.com
|
|
Currently, imsic_handle_irq() uses generic_handle_domain_irq() to handle
the interrupt, which internally has an extra step of resolving hwirq using
domain.
Avoid the translation step by replacing the hardware interrupt number with
the Linux interrupt number in the IMSIC vector data and directly call
generic_handle_irq().
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250217085657.789309-10-apatel@ventanamicro.com
|
|
Implement irq_force_complete_move() for IMSIC driver so that in-flight
vector movements on a CPU can be cleaned-up when the CPU goes down.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250217085657.789309-9-apatel@ventanamicro.com
|
|
Currently, there is only one "move" pointer in struct imsic_vector so
during vector movement the old vector points to the new vector and new
vector points to itself.
To support forced cleanup of the old vector, add separate "move_next" and
"move_prev" pointers to struct imsic_vector, where during vector movement
the "move_next" pointer of the old vector points to the new vector and the
"move_prev" pointer of the new vector points to the old vector.
Both "move_next" and "move_prev" pointers are cleared separately by
__imsic_local_sync() with a restriction that "move_prev" on the new
CPU is cleared only after the old CPU has cleared "move_next".
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250217085657.789309-8-apatel@ventanamicro.com
|
|
Simplify the leaf MSI domain handling in the RISC-V IMSIC driver by
using msi_lib_init_dev_msi_info() and msi_lib_irq_domain_select()
provided by the common MSI library.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250217085657.789309-4-apatel@ventanamicro.com
|
|
msi_lib_init_dev_msi_info() sets the default irq_eoi()/irq_ack() callbacks
unconditionally. This is correct for all existing users, but prevents the
IMSIC driver to be moved to the MSI library implementation.
Introduce chip_flags in struct msi_parent_ops, which instruct the library
to selectively set the callbacks depending on the flags, and update all
current users to set them.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250217085657.789309-3-apatel@ventanamicro.com
|
|
The IMSIC driver assigns the IMSIC domain specific imsic_irq_set_affinity()
callback to the per device leaf MSI domain. That's a layering violation as
it is called with the leaf domain data and not with the IMSIC domain
data. This prevents moving the IMSIC driver to the common MSI library which
uses the generic msi_domain_set_affinity() callback for device MSI domains.
Instead of using imsic_irq_set_affinity() for leaf MSI domains, use
imsic_irq_set_affinity() for the non-leaf IMSIC base domain and use
irq_chip_set_affinity_parent() for leaf MSI domains.
[ tglx: Massaged change log ]
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250217085657.789309-2-apatel@ventanamicro.com
|
|
Both devm_pm_runtime_enable() and pm_runtime_resume_and_get()
return 0 or a negative error code.
Simplify the checks done with their respective return values
accordingly.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250212182034.366167-7-fabrizio.castro.jz@renesas.com
|
|
Make use of dev_err_probe() to simplify rzg2l_irqc_common_init().
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/all/20250212182034.366167-6-fabrizio.castro.jz@renesas.com
|
|
No need to keep label `pm_put`, as it's only used once.
Call pm_runtime_put() directly from the error path.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/all/20250212182034.366167-5-fabrizio.castro.jz@renesas.com
|
|
Simplify rzg2l_irqc_common_init() by using devm_pm_runtime_enable().
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250212182034.366167-4-fabrizio.castro.jz@renesas.com
|
|
Use devm_reset_control_get_exclusive_deasserted() to simplify
rzg2l_irqc_common_init().
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/all/20250212182034.366167-3-fabrizio.castro.jz@renesas.com
|
|
Replace direct references to `&pdev->dev` with the local `dev` pointer
in rzg2l_irqc_common_init() to avoid redundant dereferencing.
Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/all/20250212182034.366167-2-fabrizio.castro.jz@renesas.com
|
|
The jcore-aic irqchip does not have separate interrupt numbers reserved for
cpu-local vs global interrupts. Therefore the device drivers need to
request the given interrupt as per CPU interrupt.
69a9dcbd2d65 ("clocksource/drivers/jcore: Use request_percpu_irq()")
converted the clocksource driver over to request_percpu_irq(), but failed
to do add all the required changes, resulting in a failure to register PIT
interrupts.
Fix this by:
1) Explicitly mark the interrupt via irq_set_percpu_devid() in
jcore_pit_init().
2) Enable and disable the per CPU interrupt in the CPU hotplug callbacks.
3) Pass the correct per-cpu cookie to the irq handler by using
handle_percpu_devid_irq() instead of handle_percpu_irq() in
handle_jcore_irq().
[ tglx: Massage change log ]
Fixes: 69a9dcbd2d65 ("clocksource/drivers/jcore: Use request_percpu_irq()")
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/all/20250216175545.35079-3-contact@artur-rojek.eu
|
|
Christoph reports that their rk3399 system dies since commit 773c05f417fa1
("irqchip/gic-v3: Work around insecure GIC integrations").
It appears that some rk3399 have secure payloads, and that the firmware
sets SCR_EL3.FIQ==1. Obivously, disabling security in that configuration
leads to even more problems.
Revisit the workaround by:
- making it rk3399 specific
- checking whether Group-0 is available, which is a good proxy
for SCR_EL3.FIQ being 0
- either apply the workaround if Group-0 is available, or disable
pseudo-NMIs if not
Note that this doesn't mean that the secure side is able to receive
interrupts, as all interrupts are made non-secure anyway.
Clearly, nobody ever tested secure interrupts on this platform.
Fixes: 773c05f417fa1 ("irqchip/gic-v3: Work around insecure GIC integrations")
Reported-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Christoph Fritz <chf.fritz@googlemail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250215185241.3768218-1-maz@kernel.org
Closes: https://lore.kernel.org/r/b1266652fb64857246e8babdf268d0df8f0c36d9.camel@googlemail.com
|
|
The space separator was factored out from the multiple chip name prints,
but several irq_chip::irq_print_chip() callbacks still print a leading
space. Remove the superfluous double spaces.
Fixes: 9d9f204bdf7243bf ("genirq/proc: Add missing space separator back")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/893f7e9646d8933cd6786d5a1ef3eb076d263768.1738764803.git.geert+renesas@glider.be
|
|
RISC-V APLIC specification defines "hart index" in:
https://github.com/riscv/riscv-aia
Within a given interrupt domain, each of the domain’s harts has a unique
index number in the range 0 to 2^14 − 1 (= 16,383). The index number a
domain associates with a hart may or may not have any relationship to the
unique hart identifier (“hart ID”) that the RISC-V Privileged Architecture
assigns to the hart. Two different interrupt domains may employ entirely
different index numbers for the same set of harts.
Further, this document says in "4.5 Memory-mapped control region for an
interrupt domain":
The array of IDC structures may include some for potential hart index
numbers that are not actual hart index numbers in the domain. For example,
the first IDC structure is always for hart index 0, but 0 is not
necessarily a valid index number for any hart in the domain.
Support arbitrary hart indices specified in an optional APLIC property
"riscv,hart-indexes" which is specified as an array of u32 elements, one
per interrupt target. If this property is not specified, fallback to use
logical hart indices within the domain.
Signed-off-by: Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/all/20250129091637.1667279-3-vladimir.kondratiev@mobileye.com
|
|
The CPU PMU in Apple SoCs can be configured to fire its interrupt in one of
several ways, and since Apple A11 one of the methods is FIQ, but the check
of the configuration register fails to test explicitely for FIQ mode. It
tests whether the IMODE bitfield is zero or not and the PMCRO_IACT bit is
set. That results in false positives when the IMODE bitfield is not zero,
but does not have the mode PMCR0_IMODE_FIQ.
Only handle the PMC interrupt as a FIQ when the CPU PMU has been configured
to fire FIQs, i.e. the IMODE bitfield value is PMCR0_IMODE_FIQ and
PMCR0_IACT is set.
Fixes: c7708816c944 ("irqchip/apple-aic: Wire PMU interrupts")
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250118163554.16733-1-towinchenmi@gmail.com
|
|
mvebu_icu_translate() incorrectly casts irq_domain::host_data directly to
mvebu_icu_msi_data. However, host_data actually points to a structure of
type msi_domain_info.
This incorrect cast causes issues such as the thermal sensors of the
CP110 platform malfunctioning. Specifically, the translation of the SEI
interrupt to IRQ_TYPE_EDGE_RISING fails, preventing proper interrupt
handling. The following error was observed:
genirq: Setting trigger mode 4 for irq 85 failed (irq_chip_set_type_parent+0x0/0x34)
armada_thermal f2400000.system-controller:thermal-sensor@70: Cannot request threaded IRQ 85
Resolve the issue by first casting host_data to msi_domain_info and then
accessing mvebu_icu_msi_data through msi_domain_info::chip_data.
Fixes: d929e4db22b6 ("irqchip/irq-mvebu-icu: Prepare for real per device MSI")
Signed-off-by: Stefan Eichenberger <eichest@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250124085140.44792-1-eichest@gmail.com
|
|
RISC-V distinguishes between memory accesses and device I/O and uses FENCE
instruction to order them as viewed by other RISC-V harts and external
devices or coprocessors. The FENCE instruction can order any combination of
device input(I), device output(O), memory reads(R) and memory
writes(W). For example, 'fence w, o' is used to ensure all memory writes
from instructions preceding the FENCE instruction appear earlier in the
global memory order than device output writes from instructions after the
FENCE instruction.
RISC-V issues IPIs by writing to the IMSIC/ACLINT MMIO registers, which is
regarded as device output operation. However, the existing implementation
of the IMSIC/ACLINT drivers issue the IPI via writel_relaxed(), which does
not guarantee the order of device output operation and preceding memory
writes. As a consequence the hart receiving the IPI might not observe the
IPI related data.
Fix this by replacing writel_relaxed() with writel() when issuing IPIs,
which uses 'fence w, o' to ensure all previous writes made by the current
hart are visible to other harts before they receive the IPI.
Signed-off-by: Xu Lu <luxu.kernel@bytedance.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250127093846.98625-1-luxu.kernel@bytedance.com
|
|
The Microchip LAN966x outband interrupt controller is only present on
Microchip LAN966x SoCs, and only used in PCI endpoint mode. Hence add a
dependency on MCHP_LAN966X_PCI, to prevent asking the user about this
driver when configuring a kernel without Microchip LAN966x PCIe support.
Fixes: 3e3a7b35332924c8 ("irqchip: Add support for LAN966x OIC")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/all/28e8a605e72ee45e27f0d06b2b71366159a9c782.1737383314.git.geert+renesas@glider.be
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
- Consolidate the machine_kexec_mask_interrupts() by providing a
generic implementation and replacing the copy & pasta orgy in the
relevant architectures.
- Prevent unconditional operations on interrupt chips during kexec
shutdown, which can trigger warnings in certain cases when the
underlying interrupt has been shut down before.
- Make the enforcement of interrupt handling in interrupt context
unconditionally available, so that it actually works for non x86
related interrupt chips. The earlier enablement for ARM GIC chips set
the required chip flag, but did not notice that the check was hidden
behind a config switch which is not selected by ARM[64].
- Decrapify the handling of deferred interrupt affinity setting.
Some interrupt chips require that affinity changes are made from the
context of handling an interrupt to avoid certain race conditions.
For x86 this was the default, but with interrupt remapping this
requirement was lifted and a flag was introduced which tells the core
code that affinity changes can be done in any context. Unrestricted
affinity changes are the default for the majority of interrupt chips.
RISCV has the requirement to add the deferred mode to one of it's
interrupt controllers, but with the original implementation this
would require to add the any context flag to all other RISC-V
interrupt chips. That's backwards, so reverse the logic and require
that chips, which need the deferred mode have to be marked
accordingly. That avoids chasing the 'sane' chips and marking them.
- Add multi-node support to the Loongarch AVEC interrupt controller
driver.
- The usual tiny cleanups, fixes and improvements all over the place.
* tag 'irq-core-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/generic_chip: Export irq_gc_mask_disable_and_ack_set()
genirq/timings: Add kernel-doc for a function parameter
genirq: Remove IRQ_MOVE_PCNTXT and related code
x86/apic: Convert to IRQCHIP_MOVE_DEFERRED
genirq: Provide IRQCHIP_MOVE_DEFERRED
hexagon: Remove GENERIC_PENDING_IRQ leftover
ARC: Remove GENERIC_PENDING_IRQ
genirq: Remove handle_enforce_irqctx() wrapper
genirq: Make handle_enforce_irqctx() unconditionally available
irqchip/loongarch-avec: Add multi-nodes topology support
irqchip/ts4800: Replace seq_printf() by seq_puts()
irqchip/ti-sci-inta : Add module build support
irqchip/ti-sci-intr: Add module build support
irqchip/irq-brcmstb-l2: Replace brcmstb_l2_mask_and_ack() by generic function
irqchip: keystone: Use syscon_regmap_lookup_by_phandle_args
genirq/kexec: Prevent redundant IRQ masking by checking state before shutdown
kexec: Consolidate machine_kexec_mask_interrupts() implementation
genirq: Reuse irq_thread_fn() for forced thread case
genirq: Move irq_thread_fn() further up in the code
|
