summaryrefslogtreecommitdiff
path: root/drivers/media/i2c
AgeCommit message (Collapse)Author
2022-07-08media: ov5640: Rework CSI-2 clock treeJacopo Mondi
Re-work the ov5640_set_mipi_pclk() function to calculate the PLL configuration using the pixel_rate and link_freq values set at s_fmt time. Rework the DVP clock mode settings to calculate the pixel clock internally and remove the assumption on the 16bpp format. Tested in MIPI CSI-2 mode with 1 and 2 data lanes with: - all the sensor supported resolutions in UYVY, RGB565 and MJPEG formats. - resolutions >= 1280x720 in RAW Bayer format. - resolutions < 1280x720 in RGB888 format. [Rework pclk_period and link_freq computation] Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-07-08media: ov5640: Update pixel_rate and link_freqJacopo Mondi
After having set a new format re-calculate the pixel_rate and link_freq control values and update them when in MIPI mode. Take into account the limitation of the link frequency having to be strictly smaller than 1GHz when computing the desired link_freq, and adjust the resulting pixel_rate acounting for the clock tree configuration. [Adjust link_freq calculation] Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-07-08media: ov5640: Add LINK_FREQ controlJacopo Mondi
Add the V4L2_CID_LINK_FREQ control to the ov5640 driver. Make the control read-only for the moment. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-07-08media: ov5640: Associate bpp with formatsJacopo Mondi
Associate the bit depth to each format supported by the sensor. The bpp will be used to calculate the line length. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-07-08media: ov5640: Add ov5640_is_csi2() functionJacopo Mondi
Checking if the sensor is used in DVP or MIPI CSI-2 mode is a repeated pattern which is about to be repeated more often. Provide an inline function to shortcut that. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-07-08media: ov5604: Re-arrange modes definitionJacopo Mondi
The array of supported modes is close to unreadable. Re-arrange it giving it some room to breath. Cosmetic change only. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-07-08media: ov5640: Add pixel rate to modesJacopo Mondi
Add to each mode supported by the sensor the ideal pixel rate, as defined by Table 2.1 in the chip manual. The ideal pixel rate will be used to compute the MIPI CSI-2 clock tree. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon-kit Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-07-08media: st-mipid02: expose 1X16 serial pixel formatHugues Fruchet
Expose RGB & YUV 1X16 serial pixel format variants to comply with CSI-2 camera sensor pixel formats. Signed-off-by: Hugues Fruchet <hugues.fruchet@foss.st.com> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-07-08media: st-mipid02: add support for YVYU and VYUY formatsAlain Volmat
Those two formats were missing in the list of supported MBUS formats. Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-07-08media: st-mipid02: add support of pixel clock polarityHugues Fruchet
Add support of pixel clock polarity. Signed-off-by: Hugues Fruchet <hugues.fruchet@foss.st.com> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-07-08media: ov7251: Fix multiple problems in s_stream callbackSakari Ailus
The s_stream callback had several issues: - If pm_runtime_get_sync() fails, the usage_count is not put. - The sensor wasn't suspended if s_stream(subdev, 1) failed. Fix this. Fixes: ("media: i2c: Add pm_runtime support to ov7251") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-07-05media: isl7998x: select V4L2_FWNODE to fix build errorRandy Dunlap
Fix build error when VIDEO_ISL7998X=y and V4L2_FWNODE=m by selecting V4L2_FWNODE. microblaze-linux-ld: drivers/media/i2c/isl7998x.o: in function `isl7998x_probe': (.text+0x8f4): undefined reference to `v4l2_fwnode_endpoint_parse' Cc: stable@vger.kernel.org # 5.18 and above Fixes: 51ef2be546e2 ("media: i2c: isl7998x: Add driver for Intersil ISL7998x") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Marek Vasut <marex@denx.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Reviewed-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-27media: TDA1997x: Remove now redundant non_legacy_dai_naming flagCharles Keepax
The ASoC core has now been changed to default to the non-legacy DAI naming, as such drivers using the new scheme no longer need to specify the non_legacy_dai_naming flag. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220623125250.2355471-36-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-20media: i2c: adv7180: fix reserved bit in Video Selection 2Benjamin Marty
This bit is marked as reserved in the ADV Hardware Reference Manual. Resetting this bit seems to cause increased video noise. Setting this bit according to the Hardware Reference Manual reduces the video noise immediately. Signed-off-by: Benjamin Marty <info@benjaminmarty.ch> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: adv7604: try all infoframe typesHans Verkuil
When logging the infoframes the adv7604 driver stopped reading infoframes at the first missing infoframe type. Instead it should try all supported infoframe types. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-20media: TDA1997x: Fix the error handling in tda1997x_probe()Zheyu Ma
The driver should disable the regulator when failing to probe. Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Acked-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-06-10treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_30.RULE ↵Thomas Gleixner
(part 2) Based on the normalized pattern: this program is free software you can redistribute it and/or modify it under the terms of the gnu general public license as published by the free software foundation version 2 this program is distributed as is without any warranty of any kind whether express or implied without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference. Reviewed-by: Allison Randal <allison@lohutok.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-17media: ov7251: fix mutex lock unbalanceMauro Carvalho Chehab
As reported by smatch/sparse: drivers/media/i2c/ov7251.c:1381 ov7251_s_stream() warn: inconsistent returns '&ov7251->lock'. Locked on : 1381 Unlocked on: 1377 There's a lock unbalance at this routine, as it keeps the lock on certain errors. Fix it. Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: Add vblank control to ov7251 driverDaniel Scally
Add a vblank control to the ov7251 driver. Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: Add hblank control to ov7251Daniel Scally
Add a hblank control to the ov7251 driver. This necessitates setting a default mode, for which I am simply picking the first available. Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: add ov7251_init_ctrls()Daniel Scally
V4L2 controls initialisation takes up a sizeable portion of the driver's .probe() function. To keep things neat, move it to a dedicated function. Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: Extend .get_selection() for ov7251Daniel Scally
Extend the .get_selection() callback to support other values for sel->target, primarily to satisfy libcamera's requirements. Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: Remove .s_power() from ov7251Daniel Scally
The .s_power() callback is deprecated, and now that we have pm_runtime functionality in the driver there's no further use for it. Delete the function. Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: Add pm_runtime support to ov7251Daniel Scally
Add pm_runtime support to the ov7251 driver. Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: Add ov7251_detect_chip()Daniel Scally
.probe() is quite busy for this driver; make it cleaner by moving the chip verification to a dedicated function. Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: Add support for new frequencies to ov7251Daniel Scally
The OV7251 sensor is used as the IR camera sensor on the Microsoft Surface line of tablets; this provides a 19.2MHz external clock, and the Windows driver for this sensor configures a 319.2MHz link freq to the CSI-2 receiver. Add the ability to support those rate to the driver by defining a new set of PLL configs. Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: Add ov7251_pll_configure()Daniel Scally
Rather than having the pll settings hidden inside mode blobs, define them in structs and use a dedicated function to set them. This makes it simpler to extend the driver to support other frequencies for both the external clock and desired link frequency. Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: Remove per-mode frequencies from ov7251Daniel Scally
Each of the defined modes in the ov7251 driver uses the same link frequency and pixel rate; just drop those members of the modes and set the controls to read only during initialisation. Add a new table defining the supported pixel rates to substitue for the values hardcoded in the modes. Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: Provide ov7251_check_hwcfg()Daniel Scally
Move the endpoint checking from .probe() to a dedicated function, and additionally check that the firmware provided link frequencies are a match for those supported by the driver. Store the index to the matching link frequency so it can be easily identified later. Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: Add acpi support to ov7251Daniel Scally
Add support for enumeration through ACPI to the ov7251 driver Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: ov5645: Remove unneeded of_match_ptr macroMoses Christopher Bollavarapu
of_match_ptr isn't required as CONFIG_OF is already a dependency in Kconfig Signed-off-by: Moses Christopher Bollavarapu <mosescb.dev@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: ov8856: apply digital gain by setting global gain control registerBingbu Cao
MWB gain register are used to set gain for each mwb channel mannually. However, it will involve some artifacts if gain cannot be applied to each channel synchronously. Enable global gain control to set digital global gain instead of setting AWB gain separately to fix this issue. Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: ov5648: fix wrong pointer passed to IS_ERR() and PTR_ERR()Yang Yingliang
IS_ERR() and PTR_ERR() use wrong pointer, it should be sensor->dovdd, fix it. Fixes: e43ccb0a045f ("media: i2c: Add support for the OV5648 image sensor") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: ov2640: Depend on V4L2_ASYNCMike Pagano
Add V4L2_ASYNC as a dependency to match other drivers and prevent failures when compile testing. Fixes: ff3cc65cadb5 ("media: v4l: async, fwnode: Improve module organisation") Signed-off-by: Mike Pagano <mpagano@gentoo.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: video-i2c: Use GENMASK for masking bitsMoses Christopher Bollavarapu
Replace 0x0380 with GENMASK(9, 7) to obtain 0b0000_0011_1000_0000 Signed-off-by: Moses Christopher Bollavarapu <mosescb.dev@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: video-i2c: Replace constants with proper namesMoses Christopher Bollavarapu
Acc to MLX90640 datasheet: - 0x0400 represents the start of RAM address - 0x2400 represents the start of EEPROM address Reference: https://www.melexis.com/-/media/files/documents\ /datasheets/mlx90640-datasheet-melexis.pdf Signed-off-by: Moses Christopher Bollavarapu <mosescb.dev@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: video-i2c: Move defines to the top of the fileMoses Christopher Bollavarapu
Currently, the defines in this driver are after some structs and functions, it makes more sense to move them up to the top of the file, so that the constants can be named together with other defines. Signed-off-by: Moses Christopher Bollavarapu <mosescb.dev@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: adv7180: Add support for the test patternsFabio Estevam
ADV7180 has a built-in mechanism to generate some video patterns, which is very useful for debug/bring-up activities. Add support for it. The test_pattern parameter can be one of the following values: 0: "Single color" 1: "Color bars" 2: "Luma ramp" 3: "Boundary box" 4: "Disable" Tested on a imx6q board with an ADV7280. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: ov7670: remove ov7670_power_off from ov7670_removeDongliang Mu
In ov7670_probe, it always invokes ov7670_power_off() no matter the execution is successful or failed. So we cannot invoke it agiain in ov7670_remove(). Fix this by removing ov7670_power_off from ov7670_remove. Fixes: 030f9f682e66 ("media: ov7670: control clock along with power") Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: dw9807-vcm: Add "dongwoon,dw9807" compatible stringSakari Ailus
There is firmware out there that uses "dongwoon,dw9807" compatible string that never made it to upstream as-is. Add it to the driver to make it load on such systems. The chip also has an EEPROM part which is AT24 compatible (for reading purposes) on a separate I²C address. Adding possible support for this in the future is not affected by this change. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: imx412: Add bulk regulator supportBryan O'Donoghue
Depending on the platform we may need to enable and disable three separate regulators for the imx412. - DOVDD Digital I/O power - AVDD Analog power - DVDD Digital core power The addition of these regulators shouldn't affect existing users using fixed-on/firmware-controlled regulators. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Acked-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: imx412: Fix power_off orderingBryan O'Donoghue
The enable path does - gpio - clock The disable path does - gpio - clock Fix the order on the power-off path so that power-off and power-on have the same ordering for clock and gpio. Fixes: 9214e86c0cc1 ("media: i2c: Add imx412 camera sensor driver") Cc: stable@vger.kernel.org Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-17media: i2c: imx412: Fix reset GPIO polarityBryan O'Donoghue
The imx412/imx577 sensor has a reset line that is active low not active high. Currently the logic for this is inverted. The right way to define the reset line is to declare it active low in the DTS and invert the logic currently contained in the driver. The DTS should represent the hardware does i.e. reset is active low. So: + reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>; not: - reset-gpios = <&tlmm 78 GPIO_ACTIVE_HIGH>; I was a bit reticent about changing this logic since I thought it might negatively impact @intel.com users. Googling a bit though I believe this sensor is used on "Keem Bay" which is clearly a DTS based system and is not upstream yet. Fixes: 9214e86c0cc1 ("media: i2c: Add imx412 camera sensor driver") Cc: stable@vger.kernel.org Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: s5k6a3: add missing clk_disable_unprepareHans Verkuil
Fix smatch warning: drivers/media/i2c/s5k6a3.c:234 __s5k6a3_power_on() warn: 'sensor->clock' from clk_prepare_enable() not released on lines: 234. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: ccs-core.c: fix failure to call clk_disable_unprepareHans Verkuil
Fixes smatch warning: drivers/media/i2c/ccs/ccs-core.c:1676 ccs_power_on() warn: 'sensor->ext_clk' from clk_prepare_enable() not released on lines: 1606. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: i2c: rdacm20: Fix format definitionJacopo Mondi
The RDACM20 camera supports a single image format which is currently listed as MEDIA_BUS_FMT_UYVY8_2X8. As the video stream is transmitted on the GMSL serial bus, the 2X8 variant does not apply. Fix the format by using MEDIA_BUS_FMT_UYVY8_1X16. This fixes a runtime error which is now triggered as the MAX9286 deserializer implements .link_validate(). Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-05-13media: i2c: rdacm2x: properly set subdev entity functionLaurentiu Palcu
The subdevice entity function was left unset, which produces a warning when probing the device: mxc-md bus@58000000:camera: Entity type for entity rdacm20 19-0051 was not initialized! This patch will set entity function to MEDIA_ENT_F_CAM_SENSOR and leave flags unset. Fixes: 34009bffc1c6 ("media: i2c: Add RDACM20 driver") Fixes: a59f853b3b4b ("media: i2c: Add driver for RDACM21 camera module") Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-04-24media: i2c: dw9714: Return zero in remove callbackUwe Kleine-König
The only effect of returning an error code in an i2c remove callback is that the i2c core emits a generic warning and still removes the device. So even if disabling the regulator fails it's sensible to further cleanup and then return zero to only emit a single error message. This patch is a preparation for making i2c remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-04-24media: i2c: dw9714: Disable the regulator when the driver fails to probeZheyu Ma
When the driver fails to probe, we will get the following splat: [ 59.305988] ------------[ cut here ]------------ [ 59.306417] WARNING: CPU: 2 PID: 395 at drivers/regulator/core.c:2257 _regulator_put+0x3ec/0x4e0 [ 59.310345] RIP: 0010:_regulator_put+0x3ec/0x4e0 [ 59.318362] Call Trace: [ 59.318582] <TASK> [ 59.318765] regulator_put+0x1f/0x30 [ 59.319058] devres_release_group+0x319/0x3d0 [ 59.319420] i2c_device_probe+0x766/0x940 Fix this by disabling the regulator in error handling. Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-04-24media: i2c: ov5695: fix typos in commentsJulia Lawall
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-20 16:30:56 +0000