summaryrefslogtreecommitdiff
path: root/drivers/media/usb
AgeCommit message (Collapse)Author
2015-11-17[media] usbvision fix overflow of interfaces arrayOliver Neukum
This fixes the crash reported in: http://seclists.org/bugtraq/2015/Oct/35 The interface number needs a sanity check. Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: Vladis Dronov <vdronov@redhat.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-17[media] media: fix waitqueue_active without memory barrier in cpia2 driverKosuke Tatsukawa
cpia2_usb_disconnect() seems to be missing a memory barrier which might cause the waker to not notice the waiter and miss sending a wake_up as in the following figure. cpia2_usb_disconnect sync ------------------------------------------------------------------------ mutex_unlock(&cam->v4l2_lock); if (waitqueue_active(&cam->wq_stream)) /* The CPU might reorder the test for the waitqueue up here, before prior writes complete */ /* wait_event_interruptible */ /* __wait_event_interruptible */ /* ___wait_event */ long __int = prepare_to_wait_event( &wq, &__wait, state); if (!cam->streaming || frame->status == FRAME_READY) cam->curbuff->status = FRAME_READY; cam->curbuff->length = 0; schedule() ------------------------------------------------------------------------ The attached patch removes the call to waitqueue_active() leaving just wake_up() behind. This fixes the problem because the call to spin_lock_irqsave() in wake_up() will be an ACQUIRE operation. I found this issue when I was looking through the linux source code for places calling waitqueue_active() before wake_up*(), but without preceding memory barriers, after sending a patch to fix a similar issue in drivers/tty/n_tty.c (Details about the original issue can be found here: https://lkml.org/lkml/2015/9/28/849). Signed-off-by: Kosuke Tatsukawa <tatsu@ab.jp.nec.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-17[media] gspca: ov534/topro: prevent a division by 0Antonio Ospite
v4l2-compliance sends a zeroed struct v4l2_streamparm in v4l2-test-formats.cpp::testParmType(), and this results in a division by 0 in some gspca subdrivers: divide error: 0000 [#1] SMP Modules linked in: gspca_ov534 gspca_main ... CPU: 0 PID: 17201 Comm: v4l2-compliance Not tainted 4.3.0-rc2-ao2 #1 Hardware name: System manufacturer System Product Name/M2N-E SLI, BIOS ASUS M2N-E SLI ACPI BIOS Revision 1301 09/16/2010 task: ffff8800818306c0 ti: ffff880095c4c000 task.ti: ffff880095c4c000 RIP: 0010:[<ffffffffa079bd62>] [<ffffffffa079bd62>] sd_set_streamparm+0x12/0x60 [gspca_ov534] RSP: 0018:ffff880095c4fce8 EFLAGS: 00010296 RAX: 0000000000000000 RBX: ffff8800c9522000 RCX: ffffffffa077a140 RDX: 0000000000000000 RSI: ffff880095e0c100 RDI: ffff8800c9522000 RBP: ffff880095e0c100 R08: ffffffffa077a100 R09: 00000000000000cc R10: ffff880067ec7740 R11: 0000000000000016 R12: ffffffffa07bb400 R13: 0000000000000000 R14: ffff880081b6a800 R15: 0000000000000000 FS: 00007fda0de78740(0000) GS:ffff88012fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000014630f8 CR3: 00000000cf349000 CR4: 00000000000006f0 Stack: ffffffffa07a6431 ffff8800c9522000 ffffffffa077656e 00000000c0cc5616 ffff8800c9522000 ffffffffa07a5e20 ffff880095e0c100 0000000000000000 ffff880067ec7740 ffffffffa077a140 ffff880067ec7740 0000000000000016 Call Trace: [<ffffffffa07a6431>] ? v4l_s_parm+0x21/0x50 [videodev] [<ffffffffa077656e>] ? vidioc_s_parm+0x4e/0x60 [gspca_main] [<ffffffffa07a5e20>] ? __video_do_ioctl+0x280/0x2f0 [videodev] [<ffffffffa07a5ba0>] ? video_ioctl2+0x20/0x20 [videodev] [<ffffffffa07a59b9>] ? video_usercopy+0x319/0x4e0 [videodev] [<ffffffff81182dc1>] ? page_add_new_anon_rmap+0x71/0xa0 [<ffffffff811afb92>] ? mem_cgroup_commit_charge+0x52/0x90 [<ffffffff81179b18>] ? handle_mm_fault+0xc18/0x1680 [<ffffffffa07a15cc>] ? v4l2_ioctl+0xac/0xd0 [videodev] [<ffffffff811c846f>] ? do_vfs_ioctl+0x28f/0x480 [<ffffffff811c86d4>] ? SyS_ioctl+0x74/0x80 [<ffffffff8154a8b6>] ? entry_SYSCALL_64_fastpath+0x16/0x75 Code: c7 93 d9 79 a0 5b 5d e9 f1 f3 9a e0 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 53 31 d2 48 89 fb 48 83 ec 08 8b 46 10 <f7> 76 0c 80 bf ac 0c 00 00 00 88 87 4e 0e 00 00 74 09 80 bf 4f RIP [<ffffffffa079bd62>] sd_set_streamparm+0x12/0x60 [gspca_ov534] RSP <ffff880095c4fce8> ---[ end trace 279710c2c6c72080 ]--- Following what the doc says about a zeroed timeperframe (see http://www.linuxtv.org/downloads/v4l-dvb-apis/vidioc-g-parm.html): ... To reset manually applications can just set this field to zero. fix the issue by resetting the frame rate to a default value in case of an unusable timeperframe. The fix is done in the subdrivers instead of gspca.c because only the subdrivers have notion of a default frame rate to reset the camera to. Signed-off-by: Antonio Ospite <ao2@ao2.it> Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-17[media] cx231xx: fix bulk transfer modeTerry Heo
The current cx231xx driver doesn't work with bulk transfer mode. This patch makes it possible to use bulk transfer mode. Signed-off-by: Terry Heo <terryheo@google.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-17[media] media/usb/pvrusb2: Support for V4L2_CTRL_WHICH_DEF_VALRicardo Ribalda
This driver does not use the control infrastructure. Add support for the new field which on structure v4l2_ext_controls Acked-by: Mike Isely <isely@pobox.com> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-17[media] usb/uvc: Support for V4L2_CTRL_WHICH_DEF_VALRicardo Ribalda
This driver does not use the control infrastructure. Add support for the new field which on structure v4l2_ext_controls Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-17[media] go7007: fix broken testHans Verkuil
The wrong flags field was tested for the GO7007_BOARD_HAS_AUDIO flag: that flag is in board->main_info.flags, not in board->flags. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-17[media] include/media: move driver interface headers to a separate dirMauro Carvalho Chehab
Let's not mix headers used by the core with those headers that are needed by some driver-specific interface header. The headers used on drivers were manually moved using: mkdir include/media/drv-intf/ git mv include/media/cx2341x.h include/media/cx25840.h \ include/media/exynos-fimc.h include/media/msp3400.h \ include/media/s3c_camif.h include/media/saa7146.h \ include/media/saa7146_vv.h include/media/sh_mobile_ceu.h \ include/media/sh_mobile_csi2.h include/media/sh_vou.h \ include/media/si476x.h include/media/soc_mediabus.h \ include/media/tea575x.h include/media/drv-intf/ And the references for those headers were corrected using: MAIN_DIR="media/" PREV_DIR="media/" DIRS="drv-intf/" echo "Checking affected files" >&2 for i in $DIRS; do for j in $(find include/$MAIN_DIR/$i -type f -name '*.h'); do n=`basename $j` git grep -l $n done done|sort|uniq >files && ( echo "Handling files..." >&2; echo "for i in \$(cat files|grep -v Documentation); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo "perl -ne 's,(include [\\\"\\<])$PREV_DIR($i)([\\\"\\>]),\1$MAIN_DIR$j\2\3,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done"; ); echo "Handling documentation..." >&2; echo "for i in MAINTAINERS \$(cat files); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo " perl -ne 's,include/$PREV_DIR($i)\b,include/$MAIN_DIR$j\1,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done" ); ) >script && . ./script Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2015-11-17[media] include/media: split I2C headers from V4L2 coreMauro Carvalho Chehab
Currently, include/media is messy, as it contains both the V4L2 core headers and some driver-specific headers on the same place. That makes harder to identify what core headers should be documented and what headers belong to I2C drivers that are included only by bridge/main drivers that would require the functions provided by them. Let's move those i2c specific files to its own subdirectory. The files to move were produced via the following script: mkdir include/media/i2c (cd include/media; for i in *.h; do n=`echo $i|sed s/.h$/.c/`; if [ -e ../../drivers/media/i2c/$n ]; then echo $i; git mv $i i2c/; fi; done) (cd include/media; for i in *.h; do n=`echo $i|sed s/.h$/.c/`; if [ -e ../../drivers/media/*/i2c/$n ]; then echo $i; git mv $i i2c/; fi; done) for i in include/media/*.h; do n=`basename $i`; (for j in $(git grep -l $n); do dirname $j; done)|sort|uniq|grep -ve '^.$' > list; num=$(wc -l list|cut -d' ' -f1); if [ $num == 1 ]; then if [ "`grep i2c list`" != "" ]; then git mv $i include/media/i2c; fi; fi; done And the references corrected via this script: MAIN_DIR="media/" PREV_DIR="media/" DIRS="i2c/" echo "Checking affected files" >&2 for i in $DIRS; do for j in $(find include/$MAIN_DIR/$i -type f -name '*.h'); do n=`basename $j` git grep -l $n done done|sort|uniq >files && ( echo "Handling files..." >&2; echo "for i in \$(cat files|grep -v Documentation); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo "perl -ne 's,(include [\\\"\\<])$PREV_DIR($i)([\\\"\\>]),\1$MAIN_DIR$j\2\3,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done"; ); echo "Handling documentation..." >&2; echo "for i in MAINTAINERS \$(cat files); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo " perl -ne 's,include/$PREV_DIR($i)\b,include/$MAIN_DIR$j\1,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done" ); ) >script && . ./script Merged Sakari Ailus patch that moves smiapp.h to include/media/i2c. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2015-11-05Merge tag 'media/v4.4-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: "Media updates, including: - Lots of improvements at the kABI documentation - Split of Videobuf2 into a common part and a V4L2 specific one - Split of the VB2 tracing events into a separate header file - s5p-mfc got support for Exynos 5433 - v4l2 fixes for 64-bits alignment when running 32 bits userspace on ARM - Added support for SDR radio transmitter at core, vivid and hackrf drivers - Some y2038 fixups - Some improvements at V4L2 colorspace support - saa7164 converted to use the V4L2 core control framework - several new boards additions, cleanups and fixups PS: There are two patches for scripts/kernel-doc that are needed by the documentation patches on Media. Jon is OK on merging those via my tree" * tag 'media/v4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (146 commits) [media] c8sectpfe: Remove select on CONFIG_FW_LOADER_USER_HELPER_FALLBACK [media] DocBook media: update copyright/version numbers [media] ivtv: Convert to get_user_pages_unlocked() [media] media/v4l2-ctrls: fix setting autocluster to manual with VIDIOC_S_CTRL [media] DocBook media: Fix a typo in encoder cmd [media] DocBook: add SDR specific info to G_MODULATOR / S_MODULATOR [media] DocBook: add SDR specific info to G_TUNER / S_TUNER [media] hackrf: do not set human readable name for formats [media] hackrf: add support for transmitter [media] hackrf: switch to single function which configures everything [media] hackrf: add control for RF amplifier [media] DocBook: add modulator type field [media] v4l: add type field to v4l2_modulator struct [media] DocBook: document SDR transmitter [media] v4l2: add support for SDR transmitter [media] DocBook: document tuner RF gain control [media] v4l2: add RF gain control [media] v4l2: rename V4L2_TUNER_ADC to V4L2_TUNER_SDR [media] media/vivid-osd: fix info leak in ioctl [media] media: videobuf2: Move v4l2-specific stuff to videobuf2-v4l2 ...
2015-10-22[media] rtl28xxu: fix control message flawsAntti Palosaari
Add lock to prevent concurrent access for control message as control message function uses shared buffer. Without the lock there may be remote control polling which messes the buffer causing IO errors. Increase buffer size and add check for maximum supported message length. Link: https://bugzilla.kernel.org/show_bug.cgi?id=103391 Fixes: c56222a6b25c ("[media] rtl28xxu: move usb buffers to state") Cc: <stable@vger.kernel.org> # 4.0+ Signed-off-by: Antti Palosaari <crope@iki.fi>
2015-10-20[media] hackrf: do not set human readable name for formatsAntti Palosaari
Format names are set by core nowadays. Remove name from driver. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-20[media] hackrf: add support for transmitterAntti Palosaari
HackRF SDR device has both receiver and transmitter. There is limitation that receiver and transmitter cannot be used at the same time (half-duplex operation). That patch implements transmitter support to existing receiver only driver. Signed-off-by: Antti Palosaari <crope@iki.fi> [hans.verkuil@cisco.com: fix krobot unused variable warning] [hans.verkuil@cisco.com: add back s_modulator from PATCHv4] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-20[media] hackrf: switch to single function which configures everythingAntti Palosaari
Implement single funtion, hackrf_set_params(), which handles all needed settings. Controls and other IOCTLs are just wrappers to that function. That way we can get easily better control what we could do on different device states - sleeping, receiving, transmitting. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-20[media] hackrf: add control for RF amplifierAntti Palosaari
There is Avago MGA-81563 amplifier just right after antenna connector. It could be turned on/off and its gain is around 12dB. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-20[media] media: videobuf2: Change queue_setup argumentJunghak Sung
Replace struct v4l2_format * with void * to make queue_setup() for common use. And then, modify all device drivers related with this change. Signed-off-by: Junghak Sung <jh1009.sung@samsung.com> Signed-off-by: Geunyoung Kim <nenggun.kim@samsung.com> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> [hans.verkuil@cisco.com: fix missing const in fimc-lite.c] Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-06[media] dvb: get rid of enum dmx_successMauro Carvalho Chehab
This enum is not actually used anymore. The only value used from the enum is DMX_OK, passed as a parameter on two callbacks. Yet, this value is not used anywhere. So, just remove it. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-03[media] cx231xx: fix handling cx231xx_read_i2c_data resultAndrzej Hajda
The function can return negative value. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2046107 Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-03[media] Add Terratec H7 Revision 4 to DVBSky driverErik Andresen
Adds Terratec H7 Rev. 4 with USB id 0ccd:10a5 to DVBSky driver. Signed-off-by: Erik Andresen <erik@vontaene.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-03[media] Compro U650F supportGraham Eccleston
Added Compro U650F to the rtl28xxu devices. Signed-off-by: Graham Eccleston <grahameccleston_@hotmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-01[media] media: videobuf2: Restructure vb2_bufferJunghak Sung
Remove v4l2 stuff - v4l2_buf, v4l2_plane - from struct vb2_buffer. Add new member variables - bytesused, length, offset, userptr, fd, data_offset - to struct vb2_plane in order to cover all information of v4l2_plane. struct vb2_plane { <snip> unsigned int bytesused; unsigned int length; union { unsigned int offset; unsigned long userptr; int fd; } m; unsigned int data_offset; } Replace v4l2_buf with new member variables - index, type, memory - which are common fields for buffer management. struct vb2_buffer { <snip> unsigned int index; unsigned int type; unsigned int memory; unsigned int num_planes; struct vb2_plane planes[VIDEO_MAX_PLANES]; <snip> }; v4l2 specific fields - flags, field, timestamp, timecode, sequence - are moved to vb2_v4l2_buffer in videobuf2-v4l2.c struct vb2_v4l2_buffer { struct vb2_buffer vb2_buf; __u32 flags; __u32 field; struct timeval timestamp; struct v4l2_timecode timecode; __u32 sequence; }; Signed-off-by: Junghak Sung <jh1009.sung@samsung.com> Signed-off-by: Geunyoung Kim <nenggun.kim@samsung.com> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-01[media] media: videobuf2: Replace videobuf2-core with videobuf2-v4l2Junghak Sung
Make videobuf2-v4l2 as a wrapper of videobuf2-core for v4l2-use. And replace videobuf2-core.h with videobuf2-v4l2.h. This renaming change should be accompanied by the modifications of all device drivers that include videobuf2-core.h. It can be done with just running this shell script. replace() { str1=$1 str2=$2 dir=$3 for file in $(find $dir -name *.h -o -name *.c -o -name Makefile) do echo $file sed "s/$str1/$str2/g" $file > $file.out mv $file.out $file done } replace "videobuf2-core" "videobuf2-v4l2" "include/media/" replace "videobuf2-core" "videobuf2-v4l2" "drivers/media/" replace "videobuf2-core" "videobuf2-v4l2" "drivers/usb/gadget/" replace "videobuf2-core" "videobuf2-v4l2" "drivers/staging/media/" Signed-off-by: Junghak Sung <jh1009.sung@samsung.com> Signed-off-by: Geunyoung Kim <nenggun.kim@samsung.com> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-01[media] cx25821, cx88, tm6000: use SNDRV_DEFAULT_ENABLE_PNPLuis de Bethencourt
Instead of manually initializing the bool array enable, use the SNDRV_DEFAULT_ENABLE_PNP macro. As most drivers do. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-01[media] go7007: Fix returned errno code in gen_mjpeghdr_to_package()Javier Martinez Canillas
The driver is using -1 instead of the -ENOMEM defined macro to specify that a buffer allocation failed. Since the error number is propagated, the caller will get a -EPERM which is the wrong error condition. Also, the smatch tool complains with the following warning: gen_mjpeghdr_to_package() warn: returning -1 instead of -ENOMEM is sloppy Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-01[media] use v4l2_get_timestamp where possibleArnd Bergmann
This is a preparation for a change to the type of v4l2 timestamps. v4l2_get_timestamp() is a helper function that reads the monotonic time and stores it into a 'struct timeval'. Multiple drivers implement the same thing themselves for historic reasons. Changing them all to use v4l2_get_timestamp() is more consistent and reduces the amount of code duplication, and most importantly simplifies the following changes. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> [hans.verkuil@cisco.com: dropped the v4l2-dev.c patch that didn't belong here] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-09-25[media] uvcvideo: Disable hardware timestamps by defaultLaurent Pinchart
The hardware timestamping implementation has been reported as not working correctly on at least the Logitech C920. Until this can be fixed, disable it by default. Reported-by: Peter Rabbitson <rabbit@rabbit.us> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-09-03[media] cx231xx: Use wake_up_interruptible() instead of ↵Steven Rostedt
wake_up_interruptible_nr() While looking at use cases of the wake queues in order to add support for simple wait queues, I noticed that there was only a single user of wake_up_interruptible_nr(), and that use was doing a single task wake up. Have that user use the proper wake_up_interruptible() instead, and perhaps we can even remove the function wake_up_interruptible_nr(). Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-11[media] Technisat SkyStar USB HD,(DVB-S/S2) too much URBs for arm devicesChristian Löpke
Using 8 URBs results in a consecutive buffer allocation of too much memory for some arm devices. As we use isochronuous transfers the number of URBs can be reduced without risking data-loss. Signed-off-by: Christian Loepke <loepke@edfritsch.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-11[media] Drop owner assignment from i2c_driverKrzysztof Kozlowski
i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-11[media] pctv452e: Replace memset with eth_zero_addrVaishali Thakkar
Use eth_zero_addr to assign the zero address to the given address array instead of memset when second argument is address of zero. Note that the 6 in the third argument of memset appears to represent an ethernet address size (ETH_ALEN). The Coccinelle semantic patch that makes this change is as follows: // <smpl> @eth_zero_addr@ expression e; @@ -memset(e,0x00,6); +eth_zero_addr(e); // </smpl> Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-11[media] usb/airspy: removing unneeded gotoManinder Singh
This patch removes unneded goto, reported by coccinelle. Signed-off-by: Maninder Singh <maninder1.s@samsung.com> Reviewed-by: Akhilesh Kumar <akhilesh.k@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-11[media] em28xx: remove unused a8293 SEC configAntti Palosaari
Devices that were using a8293 SEC are converted to I2C platform data thus that old config structure is left unused. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-11[media] usbvision: move init code to probe()Hans Verkuil
These things are only initialized if you start streaming video, but they are also used in the disconnect function. So just init them always during probe time. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-11[media] usbvision: fix standards for S-Video/Composite inputsHans Verkuil
The standards supported by S-Video and Composite inputs are not limited by PAL, so make it more generic. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-11[media] usbvision: fix DMA from stack warningsHans Verkuil
In various places the stack was used to provide buffers for USB data, but this should be allocated memory. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-11[media] usbvision: fix locking errorHans Verkuil
If remove_pending is non-zero, then the v4l2_lock is never unlocked. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-11[media] usbvision: set field and colorspaceHans Verkuil
Set the colorspace and field in vidioc_try_fmt_vid_cap(). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-11[media] usbvision: frequency fixesHans Verkuil
- setup initial radio and tv frequencies. - set/get the correct frequency (radio vs tv). - disable tuner/freq ioctls if there is no tuner. - fix some tuner index checks. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-11[media] usbvision: the radio device node has wrong capsHans Verkuil
The radio device node had the same caps as the video node. Fix this. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-11[media] usbvision: remove g/s_audio and for radio remove enum/g/s_inputHans Verkuil
The g/s_audio ioctls didn't do anything, so remove them all for both video and radio nodes and remove V4L2_CAP_AUDIO. The enum/g/s_input ioctls are invalid for radio nodes, so remove them from the radio ioctl_ops. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-11[media] usbvision: return valid error in usbvision_register_video()Hans Verkuil
Don't return -1, return a proper error code. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-11[media] usbvision: convert to the control frameworkHans Verkuil
Convert this driver to the control framework and struct v4l2_fh (needed for handling control events). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-11[media] usbvision: remove power_on_at_open and timed power offHans Verkuil
This causes lots of problems and is *very* slow as well. One of the main problems is that this prohibits the use of the control framework since subdevs will be unloaded on power off which is not allowed as long as they are used by a usb device. Apparently the reason for doing this is to turn off a noisy tuner. My hardware has no problem with that, and I wonder whether the hardware with that noisy tuner wasn't just functioning improperly as I have never heard of noisy tuners. Contact me if you have one of those devices and I can take a look whether the tuner can't be powered off if necessary by letting the tuner subdevice go into standby mode. Unloading the tuner module is just evil and is not the right approach. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] stk1160: Add frame scaling supportEzequiel Garcia
This commit implements frame decimation for stk1160, which allows to support format changes instead of a static frame size. The stk1160 supports independent row and column decimation, in two different modes: * set a number of rows/columns units to skip for each unit sent. * set a number of rows/columns units to send for each unit skipped. This effectively allows to achieve different frame scaling ratios. The unit number can be set to either two row/columns sent/skipped, or four row/columns sent/skipped. Since the video format (UYVY) has 4-bytes, using a unit number of two row/columns results in frame color 'shifting', so set to four row/columns sent/skipped. Signed-off-by: Michael Stegemann <michael@stegemann.it> Signed-off-by: Dale Hamel <dale.hamel@srvthe.net> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] stk1160: Reduce driver verbosityEzequiel Garcia
These messages are not really informational, and just makes the driver's output too verbose. This commit changes some messages to a debug level, removes a really useless "driver loaded" message and finally undefines the DEBUG macro. Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] ttusb-dec: use swap() in swap_bytes()Fabian Frederick
Use kernel.h macro definition. Thanks to Julia Lawall for Coccinelle scripting support. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-06[media] lmedm04: NEC scancode cleanupDavid Härdeman
This changes the keymap back to the state before commit 616a4b83 and changes the driver to use full NEC32 scancodes following the instructions provided by Malcolm Priestley <tvboxspy@gmail.com>. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-06[media] gscpa_m5602: use msecs_to_jiffies for conversionsNicholas Mc Guire
API compliance scanning with coccinelle flagged: ./drivers/media/usb/gspca/m5602/m5602_s5k83a.c:180:9-25: WARNING: timeout (100) seems HZ dependent Numeric constants passed to schedule_timeout() make the effective timeout HZ dependent which makes little sense in a polling loop for the cameras rotation state. Fixed up by converting the constant to jiffies with msecs_to_jiffies() Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-06[media] gspca: sn9c2028: remove an unneeded conditionDan Carpenter
We already know status is negative because of the earlier check so there is no need to check again. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-06[media] stk1160: fix sequence handlingHans Verkuil
Fix the sequence counter: we're counting frames, not fields. Also remove the unused 'field' field. That would only be needed if this driver would support V4L2_FIELD_ALTERNATE. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
generated by cgit (git 2.34.1) at 2025-10-02 00:49:04 +0000