summaryrefslogtreecommitdiff
path: root/drivers/media
AgeCommit message (Collapse)Author
2019-10-01media: ov6650: Fix some format attributes not under controlJanusz Krzysztofik
User arguments passed to .get/set_fmt() pad operation callbacks may contain unsupported values. The driver takes control over frame size and pixel code as well as colorspace and field attributes but has never cared for remainig format attributes, i.e., ycbcr_enc, quantization and xfer_func, introduced by commit 11ff030c7365 ("[media] v4l2-mediabus: improve colorspace support"). Fix it. Set up a static v4l2_mbus_framefmt structure with attributes initialized to reasonable defaults and use it for updating content of user provided arguments. In case of V4L2_SUBDEV_FORMAT_ACTIVE, postpone frame size update, now performed from inside ov6650_s_fmt() helper, util the user argument is first updated in ov6650_set_fmt() with default frame format content. For V4L2_SUBDEV_FORMAT_TRY, don't copy all attributes to pad config, only those handled by the driver, then fill the response with the default frame format updated with resulting pad config format code and frame size. Fixes: 11ff030c7365 ("[media] v4l2-mediabus: improve colorspace support") Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: ov6650: Fix incorrect use of JPEG colorspaceJanusz Krzysztofik
Since its initial submission, the driver selects V4L2_COLORSPACE_JPEG for supported formats other than V4L2_MBUS_FMT_SBGGR8_1X8. According to v4l2-compliance test program, V4L2_COLORSPACE_JPEG applies exclusively to V4L2_PIX_FMT_JPEG. Since the sensor does not support JPEG format, fix it to always select V4L2_COLORSPACE_SRGB. Fixes: 2f6e2404799a ("[media] SoC Camera: add driver for OV6650 sensor") Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: ov6650: Fix crop rectangle alignment not passed backJanusz Krzysztofik
Commit 4f996594ceaf ("[media] v4l2: make vidioc_s_crop const") introduced a writable copy of constified user requested crop rectangle in order to be able to perform hardware alignments on it. Later on, commit 10d5509c8d50 ("[media] v4l2: remove g/s_crop from video ops") replaced s_crop() video operation using that const argument with set_selection() pad operation which had a corresponding argument not constified, however the original behavior of the driver was not restored. Since that time, any hardware alignment applied on a user requested crop rectangle is not passed back to the user calling .set_selection() as it should be. Fix the issue by dropping the copy and replacing all references to it with references to the crop rectangle embedded in the user argument. Fixes: 10d5509c8d50 ("[media] v4l2: remove g/s_crop from video ops") Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: ov6650: Fix control handler not freed on init errorJanusz Krzysztofik
Since commit afd9690c72c3 ("[media] ov6650: convert to the control framework"), if an error occurs during initialization of a control handler, resources possibly allocated to the handler are not freed before device initialiaton is aborted. Fix it. Fixes: afd9690c72c3 ("[media] ov6650: convert to the control framework") Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: ov6650: Fix MODULE_DESCRIPTIONJanusz Krzysztofik
Commit 23a52386fabe ("media: ov6650: convert to standalone v4l2 subdevice") converted the driver from a soc_camera sensor to a standalone V4L subdevice driver. Unfortunately, module description was not updated to reflect the change. Fix it. While being at it, update email address of the module author. Fixes: 23a52386fabe ("media: ov6650: convert to standalone v4l2 subdevice") Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: max2175: Fix build error without CONFIG_REGMAP_I2CYueHaibing
If CONFIG_REGMAP_I2C is not set, building fails: drivers/media/i2c/max2175.o: In function `max2175_probe': max2175.c:(.text+0x1404): undefined reference to `__devm_regmap_init_i2c' Select REGMAP_I2C to fix this. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: b47b79d8a231 ("[media] media: i2c: max2175: Add MAX2175 support") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: cx231xx: convert to the vb2 frameworkHans Verkuil
This patch converts the cx231xx driver to the vb2 framework. Since you can't do a partial conversion this is a big-bang patch, i.e. large and hard to review. I never found a way around this. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Co-developed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: cec-gpio: add notifier supportHans Verkuil
Add support for cec-notifier to the cec-gpio driver. This makes it possible to associate the CEC gpio pin with an HDMI connector. This feature was always documented in the cec-gpio bindings: Documentation/devicetree/bindings/media/cec-gpio.txt But support for the hdmi-phandle property was never actually implemented in this driver. This patch adds support for this property. It also fixes a few incorrect error returns in the probe() function, which skipped the call to cec_delete_adapter(). Tested on a Raspberry Pi 3B with a modified vc4 driver. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: cec: expose the new connector info APIDariusz Marcinkiewicz
Until now the connector info API was a kernel-internal API only. This moves it to the public API and adds the new ioctl to retrieve this information. Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: cec/cec-adap.c: use new UI_CMD definesHans Verkuil
Instead of hardcoding the UI Command key values, use the new defines. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: rcar-vin: Add support for V4L2_FIELD_ALTERNATENiklas Söderlund
The hardware is capable to passing V4L2_FIELD_ALTERNATE to user-space. Allow users to request this field format but still default to using the hardware interlacer if alternating is not explicitly requested. Before this change a sensor providing data using alternate would be always combined to an interlaced frame. After this change the user can request to receive frames as alternate if the sensor provides it. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: rcar-vin: Do not reset the crop and compose rectangles in s_fmtNiklas Söderlund
The crop and compose rectangles are reset when s_fmt is called resulting in potentially valid rectangles being lost when updating the format. Fix this by mapping the rectangles inside the new format. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: rcar-vin: Rename rectangle holding the video source informationNiklas Söderlund
The variable to hold the video source information dimensions was poorly named 'source'. This is confusing as a lot of other members of structs share the same name with different purposes, rename it src_rect in preparation of refactoring code. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: rcar-vin: Make use of V4L2_FIELD_IS_INTERLACED() macroNiklas Söderlund
The V4L2_FIELD_IS_INTERLACED() can be used to make the code more readable, use it. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: rcar-vin: Fix incorrect return statement in rvin_try_format()Niklas Söderlund
While refactoring code the return statement became corrupted, fix it by returning the correct return code. Reported-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Fixes: 897e371389e77514 ("media: rcar-vin: simplify how formats are set and reset" Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: vim2m: Fix abort issueJernej Skrabec
Currently, if start streaming -> stop streaming -> start streaming sequence is executed, driver will end job prematurely, if ctx->translen is higher than 1, because "aborting" flag is still set from previous stop streaming command. Fix that by clearing "aborting" flag in start streaming handler. Fixes: 96d8eab5d0a1 ("V4L/DVB: [v5,2/2] v4l: Add a mem-to-mem videobuf framework test device") Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: vivid: Set vid_cap_streaming and vid_out_streaming to trueVandana BN
When vbi stream is started, followed by video streaming, the vid_cap_streaming and vid_out_streaming were not being set to true, which would cause the video stream to stop when vbi stream is stopped. This patch allows to set vid_cap_streaming and vid_out_streaming to true. According to Hans Verkuil it appears that these 'if (dev->kthread_vid_cap)' checks are a left-over from the original vivid development and should never have been there. Signed-off-by: Vandana BN <bnvandana@gmail.com> Cc: <stable@vger.kernel.org> # for v3.18 and up Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: v4l2-dv-timings.c: fix format stringHans Verkuil
It should be "%u.%02u" instead of "%u.%u". Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reported-by: Bard Winther <bwinther@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: vim2m: Fix BUG_ON in vim2m_device_release()Kefeng Wang
If v4l2_m2m_init() fails, m2m_dev pointer will be set ERR_PTR(-ENOMEM), then kfree m2m_dev will trigger BUG_ON, see below, fix it by setting m2m_dev to NULL. vim2m vim2m.0: Failed to init mem2mem device ------------[ cut here ]------------ kernel BUG at mm/slub.c:3944! invalid opcode: 0000 [#1] SMP PTI CPU: 11 PID: 9061 Comm: insmod Tainted: G E 5.2.0-rc2 #81 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:kfree+0x11a/0x160 Call Trace: vim2m_device_release+0x3f/0x50 [vim2m] device_release+0x27/0x80 kobject_release+0x68/0x190 vim2m_probe+0x20f/0x280 [vim2m] platform_drv_probe+0x37/0x90 really_probe+0xef/0x3d0 driver_probe_device+0x110/0x120 device_driver_attach+0x4f/0x60 __driver_attach+0x9a/0x140 ? device_driver_attach+0x60/0x60 bus_for_each_dev+0x76/0xc0 ? klist_add_tail+0x57/0x70 bus_add_driver+0x141/0x210 driver_register+0x5b/0xe0 vim2m_init+0x29/0x1000 [vim2m] do_one_initcall+0x46/0x1f4 ? __slab_alloc+0x1c/0x30 ? kmem_cache_alloc_trace+0x167/0x1b0 do_init_module+0x5b/0x21f load_module+0x1add/0x1fb0 ? __do_sys_finit_module+0xe9/0x110 __do_sys_finit_module+0xe9/0x110 do_syscall_64+0x5b/0x1c0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: ea6c7e34f3b2 ("media: vim2m: replace devm_kzalloc by kzalloc") Reported-by: Hulk Robot <hulkci@huawei.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: mtk-vcodec: vdec: clean up vidioc_vdec_s_fmt a bitAlexandre Courbot
Check for a potentially NULL pointer that was overlooked and use shorter accessors to the same data. While we are at it, sprinkle a few comments. Signed-off-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: mtk-vcodec: vdec: set VPI IPI handler in one placeAlexandre Courbot
Each of the supported decoder formats used to set the same RPC interrupt handler by themselves, even though this could be done by the IF init function itself. Move it to the right place and stop making its symbol public. Signed-off-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: mtk-vcodec: vdec: fix incorrect pointer dereferenceYunfei Dong
mtk_q_data::fmt is actually a pointer and must be dereferenced as such. This went under the radar because mtk_v4l2_debug() evaluates to nothing unless DEBUG is defined. [acourbot: split into its own commit] Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Signed-off-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: em28xx: make various arrays static const, makes object smallerColin Ian King
Don't populate the arrays on the stack but instead make them static const. Makes the object code smaller by 767 bytes. Before: text data bss dec hex filename 41567 15088 192 56847 de0f em28xx/em28xx-dvb.o After: text data bss dec hex filename 39872 16016 192 56080 db10 em28xx/em28xx-dvb.o (gcc version 9.2.1, amd64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: s3c-camif: make array 'registers' static const, makes object smallerColin Ian King
Don't populate the array 'registers' on the stack but instead make it static const. Makes the object code smaller by 45 bytes. Before: text data bss dec hex filename 17364 5000 0 22364 575c platform/s3c-camif/camif-regs.o After: text data bss dec hex filename 17255 5064 0 22319 572f platform/s3c-camif/camif-regs.o (gcc version 9.2.1, amd64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: seco-cec: Add a missing 'release_region()' in an error handling pathChristophe JAILLET
At the beginning of the probe function, we have a call to 'request_muxed_region(BRA_SMB_BASE_ADDR, 7, "CEC00001")()' A corresponding 'release_region()' is performed in the remove function but is lacking in the error handling path. Add it. Fixes: b03c2fb97adc ("media: add SECO cec driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: am437x-vpfe: Switch to SPDX LicensingBenoit Parrot
Switch to SPDX licensing and drop the redundant GPL text. Signed-off-by: Benoit Parrot <bparrot@ti.com> Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: am437x-vpfe: Remove per bus width static dataBenoit Parrot
The bus related static data included in the vpfe_fmt static table can be derived dynamically instead. This simplify the table and it's use. We instead replace the per bus data info with just the usual bit per pixel value for each supported pixel format. Signed-off-by: Benoit Parrot <bparrot@ti.com> Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: am437x-vpfe: TRY_FMT ioctl is not really trying anythingBenoit Parrot
The try_fmt was not actually trying out the provided format but merely returning the current format basically like get_fmt. In addition set_fmt should first invoked try_fmt to validate the given format before applying it to the hardware. To fix all of these the whole get/try/set ioctl functions had to be reworked. When calculating the bytesperline/stride and sizeimage format member we don't need to locally store the current value of bytesperpixel as it can easily get derived dynamically. Signed-off-by: Benoit Parrot <bparrot@ti.com> Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: am437x-vpfe: fix function trace debug logBenoit Parrot
checkpatch.pl nows reports several: WARNING: Prefer using '"%s...", __func__' to using '<function name>', this function's name, in a string. So fix these for the whole driver. At the same time remove the function entry trace log as those can be enabled using ftrace instead. Signed-off-by: Benoit Parrot <bparrot@ti.com> Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: am437x-vpfe: Use a per instance format array instead of a static oneBenoit Parrot
Using a statically defined format array would cause issue when multiple vpfe instance would be connected to sub-device of different capabilities. We need to use an instance based array instead to properly maintain a per port/instance format list. Signed-off-by: Benoit Parrot <bparrot@ti.com> Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: am437x-vpfe: Setting STD to current value is not an errorBenoit Parrot
VIDIOC_S_STD should not return an error if the value is identical to the current one. This error was highlighted by the v4l2-compliance test. Signed-off-by: Benoit Parrot <bparrot@ti.com> Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: am437x-vpfe: Streamlined vb2 buffer cleanupBenoit Parrot
Returning queued vb2 buffers back to user space is a common task best handled by a helper function. Signed-off-by: Benoit Parrot <bparrot@ti.com> Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: am437x-vpfe: fix start streaming error pathBenoit Parrot
When start_streaming fails the h/w module might be left enabled inadvertently. Make sure it is disabled in the error path. Signed-off-by: Benoit Parrot <bparrot@ti.com> Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: am437x-vpfe: Wait for end of frame before tear-downBenoit Parrot
We were originally attempting to stop all processing as soon as possible, but the in-progress DMA operation cannot be canceled. This led to the module being in a busy state and prevented proper power management functionality. The existing implementation would attempt to clean things up by waiting up to 50ms. However when receiving video frame at 15fps or lower, it meant an inter frame arrival rate of 66.6 ms or higher. In such cases upon tear down the following message could be seen: omap_hwmod: vpfe0: _wait_target_disable failed This patch fixes this issue by adding a stopping state where we would wait for the next Vsync before disabling the hardware. Signed-off-by: Benoit Parrot <bparrot@ti.com> Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: am437x-vpfe: Rework ISR routine for clarityBenoit Parrot
Make the ISR code simpler to follow by removing goto and relocating/eliminating duplicate spinlock accesses. Signed-off-by: Benoit Parrot <bparrot@ti.com> Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: am437x-vpfe: Fix missing first lineBenoit Parrot
Previous generation of this driver were hard coded to handle encoder/decoder where the first line never contains any data and was therefore always skipped, however when dealing with actual camera sensors the first line is always present. Signed-off-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Jyri Sarha <jsarha@ti.com> Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: am437x-vpfe: Fix suspend path to always handle pinctrl configDave Gerlach
Currently if vpfe is not active then it returns immediately in the suspend and resume handlers. Change this so that it always performs the pinctrl config so that we can still get proper sleep state configuration on the pins even if we do not need to worry about fully saving and restoring context. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Benoit Parrot <bparrot@ti.com> Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: vimc: move duplicated IS_SRC and IS_SINK to common headerShuah Khan
Move duplicated IS_SRC and IS_SINK dfines to common header. Rename them to VIMC_IS_SRC and VIM_IS_SINK. Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: vimc: Fix gpf in rmmod path when stream is activeShuah Khan
If vimc module is removed while streaming is in progress, sensor subdev unregister runs into general protection fault when it tries to unregister media entities. This is a common subdev problem related to releasing pads from v4l2_device_unregister_subdev() before calling unregister. Unregister references pads during unregistering subdev. The sd release handler is the right place for releasing all sd resources including pads. The release handlers currently release all resources except the pads. Fix v4l2_device_unregister_subdev() not release pads and release pads from the sd_int_op release handlers. kernel: [ 4136.715839] general protection fault: 0000 [#1] SMP PTI kernel: [ 4136.715847] CPU: 2 PID: 1972 Comm: bash Not tainted 5.3.0-rc2+ #4 kernel: [ 4136.715850] Hardware name: Dell Inc. OptiPlex 790/0HY9JP, BIOS A18 09/24/2013 kernel: [ 4136.715858] RIP: 0010:media_gobj_destroy.part.16+0x1f/0x60 kernel: [ 4136.715863] Code: ff 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48 89 fe 48 89 e5 53 48 89 fb 48 c7 c7 00 7f cf b0 e8 24 fa ff ff 48 8b 03 <48> 83 80 a0 00 00 00 01 48 8b 43 18 48 8b 53 10 48 89 42 08 48 89 kernel: [ 4136.715866] RSP: 0018:ffff9b2248fe3cb0 EFLAGS: 00010246 kernel: [ 4136.715870] RAX: bcf2bfbfa0d63c2f RBX: ffff88c3eb37e9c0 RCX: 00000000802a0018 kernel: [ 4136.715873] RDX: ffff88c3e4f6a078 RSI: ffff88c3eb37e9c0 RDI: ffffffffb0cf7f00 kernel: [ 4136.715876] RBP: ffff9b2248fe3cb8 R08: 0000000001000002 R09: ffffffffb0492b00 kernel: [ 4136.715879] R10: ffff9b2248fe3c28 R11: 0000000000000001 R12: 0000000000000038 kernel: [ 4136.715881] R13: ffffffffc09a1628 R14: ffff88c3e4f6a028 R15: fffffffffffffff2 kernel: [ 4136.715885] FS: 00007f8389647740(0000) GS:ffff88c465500000(0000) knlGS:0000000000000000 kernel: [ 4136.715888] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: [ 4136.715891] CR2: 000055d008f80fd8 CR3: 00000001996ec005 CR4: 00000000000606e0 kernel: [ 4136.715894] Call Trace: kernel: [ 4136.715903] media_gobj_destroy+0x14/0x20 kernel: [ 4136.715908] __media_device_unregister_entity+0xb3/0xe0 kernel: [ 4136.715915] media_device_unregister_entity+0x30/0x40 kernel: [ 4136.715920] v4l2_device_unregister_subdev+0xa8/0xe0 kernel: [ 4136.715928] vimc_ent_sd_unregister+0x1e/0x30 [vimc] kernel: [ 4136.715933] vimc_sen_rm+0x16/0x20 [vimc] kernel: [ 4136.715938] vimc_remove+0x3e/0xa0 [vimc] kernel: [ 4136.715945] platform_drv_remove+0x25/0x50 kernel: [ 4136.715951] device_release_driver_internal+0xe0/0x1b0 kernel: [ 4136.715956] device_driver_detach+0x14/0x20 kernel: [ 4136.715960] unbind_store+0xd1/0x130 kernel: [ 4136.715965] drv_attr_store+0x27/0x40 kernel: [ 4136.715971] sysfs_kf_write+0x48/0x60 kernel: [ 4136.715976] kernfs_fop_write+0x128/0x1b0 kernel: [ 4136.715982] __vfs_write+0x1b/0x40 kernel: [ 4136.715987] vfs_write+0xc3/0x1d0 kernel: [ 4136.715993] ksys_write+0xaa/0xe0 kernel: [ 4136.715999] __x64_sys_write+0x1a/0x20 kernel: [ 4136.716005] do_syscall_64+0x5a/0x130 kernel: [ 4136.716010] entry_SYSCALL_64_after_hwframe+0x4 Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: vimc: Collapse component structure into a single monolithic driverShuah Khan
vimc uses Component API to split the driver into functional components. The real hardware resembles a monolith structure than component and component structure added a level of complexity making it hard to maintain without adding any real benefit. The sensor is one vimc component that would makes sense to be a separate module to closely align with the real hardware. It would be easier to collapse vimc into single monolithic driver first and then split the sensor off as a separate module. Collapse it into a single monolithic driver removing the Component API. This patch removes the component API and makes minimal changes to the code base preserving the functional division of the code structure. Preserving the functional structure allows us to split the sensor off as a separate module in the future. Major design elements in this change are: - Use existing struct vimc_ent_config and struct vimc_pipeline_config to drive the initialization of the functional components. - Make vimc_device and vimc_ent_config global by moving them to vimc-common.h - Add two new hooks add and rm to initialize and register, unregister and free subdevs. - All component API is now gone and bind and unbind hooks are modified to do "add" and "rm" with minimal changes to just add and rm subdevs. - vimc-core's bind and unbind are now register and unregister. - Add a new field to vimc_device structure for saving the pointers to struct vimc_ent_device(s) subdevs create in their "add" hooks. These get used to create links and removing the subdevs. vimc-core allocates this array which sized to number of entries in the topology defined in the vimc_pipeline_config structure. - vimc-core invokes "add" hooks from its vimc_register_devices(). The "add" hooks remain the same and register subdevs. They don't create platform devices of their own and use vimc's pdev.dev as their reference device. Each "add" hook returns pointer to its struct vimc_ent_device. This is saved in the vimc_device ent_devs array. - vimc-core invokes "rm" hooks from its unregister to unregister subdevs and cleanup. - vimc-core invokes "add" and "rm" hooks with pointer to struct vimc_device and the corresponding vimc_ent_device saved in the ent_devs. The following configure and stream test works on all devices. media-ctl -d platform:vimc -V '"Sensor A":0[fmt:SBGGR8_1X8/640x480]' media-ctl -d platform:vimc -V '"Debayer A":0[fmt:SBGGR8_1X8/640x480]' media-ctl -d platform:vimc -V '"Sensor B":0[fmt:SBGGR8_1X8/640x480]' media-ctl -d platform:vimc -V '"Debayer B":0[fmt:SBGGR8_1X8/640x480]' v4l2-ctl -z platform:vimc -d "RGB/YUV Capture" -v width=1920,height=1440 v4l2-ctl -z platform:vimc -d "Raw Capture 0" -v pixelformat=BA81 v4l2-ctl -z platform:vimc -d "Raw Capture 1" -v pixelformat=BA81 v4l2-ctl --stream-mmap --stream-count=100 -d /dev/video1 v4l2-ctl --stream-mmap --stream-count=100 -d /dev/video2 v4l2-ctl --stream-mmap --stream-count=100 -d /dev/video3 Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: mc-device.c: fix memleak in media_device_register_entityzhengbin
In media_device_register_entity, if media_graph_walk_init fails, need to free the previously memory. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: i2c: mt9m001: make array init_regs static, makes object smallerColin Ian King
Don't populate the array init_regs on the stack but instead make it static. Makes the object code smaller by 57 bytes. Before: text data bss dec hex filename 15935 3600 128 19663 4ccf drivers/media/i2c/mt9m001.o After: text data bss dec hex filename 15782 3696 128 19606 4c96 drivers/media/i2c/mt9m001.o (gcc version 9.2.1, amd64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-09-25media/v4l2-core: untag user pointers in videobuf_dma_contig_user_getAndrey Konovalov
This patch is a part of a series that extends kernel ABI to allow to pass tagged user pointers (with the top byte set to something else other than 0x00) as syscall arguments. videobuf_dma_contig_user_get() uses provided user pointers for vma lookups, which can only by done with untagged pointers. Untag the pointers in this function. Link: http://lkml.kernel.org/r/100436d5f8e4349a78f27b0bbb27e4801fcb946b.1563904656.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Eric Auger <eric.auger@redhat.com> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Jens Wiklander <jens.wiklander@linaro.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24Merge branch 'i2c/for-5.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - new driver for ICY, an Amiga Zorro card :) - axxia driver gained slave mode support, NXP driver gained ACPI - the slave EEPROM backend gained 16 bit address support - and lots of regular driver updates and reworks * 'i2c/for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (52 commits) i2c: tegra: Move suspend handling to NOIRQ phase i2c: imx: ACPI support for NXP i2c controller i2c: uniphier(-f): remove all dev_dbg() i2c: uniphier(-f): use devm_platform_ioremap_resource() i2c: slave-eeprom: Add comment about address handling i2c: exynos5: Remove IRQF_ONESHOT i2c: stm32f7: Make structure stm32f7_i2c_algo constant i2c: cht-wc: drop check because i2c_unregister_device() is NULL safe i2c-eeprom_slave: Add support for more eeprom models i2c: fsi: Add of_put_node() before break i2c: synquacer: Make synquacer_i2c_ops constant i2c: hix5hd2: Remove IRQF_ONESHOT i2c: i801: Use iTCO version 6 in Cannon Lake PCH and beyond watchdog: iTCO: Add support for Cannon Lake PCH iTCO i2c: iproc: Make bcm_iproc_i2c_quirks constant i2c: iproc: Add full name of devicetree node to adapter name i2c: piix4: Add ACPI support i2c: piix4: Fix probing of reserved ports on AMD Family 16h Model 30h i2c: ocores: use request_any_context_irq() to register IRQ handler i2c: designware: Fix optional reset error handling ...
2019-09-19Merge tag 'tag-chrome-platform-for-v5.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Benson Leung: "CrOS EC / MFD Migration: - Move cros_ec core driver from mfd into chrome platform. Wilco EC: - Add batt_ppid_info command to Wilco telemetry driver. CrOS EC: - cros_ec_rpmsg : Add support to inform EC of suspend/resume status - cros_ec_rpmsg : Fix race condition on probe failed - cros_ec_chardev : Add a poll handler to receive MKBP events Misc: - bugfixes in cros_usbpd_logger and cros_ec_ishtp" * tag 'tag-chrome-platform-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: cros_usbpd_logger: null check create_singlethread_workqueue platform/chrome: cros_ec_chardev: Add a poll handler to receive MKBP events platform/chrome: cros_ec_rpmsg: Fix race with host command when probe failed platform/chrome: chromeos_tbmc: Report wake events mfd: cros_ec: Use mfd_add_hotplug_devices() helper mfd: cros_ec: Add convenience struct to define autodetectable CrOS EC subdevices mfd: cros_ec: Add convenience struct to define dedicated CrOS EC MCUs mfd: cros_ec: Use kzalloc and cros_ec_cmd_xfer_status helper mfd / platform: cros_ec: Reorganize platform and mfd includes mfd / platform: cros_ec: Rename config to a better name mfd: cros_ec: Switch to use the new cros-ec-chardev driver mfd / platform: cros_ec: Miscellaneous character device to talk with the EC mfd / platform: cros_ec: Move cros-ec core driver out from MFD mfd / platform: cros_ec: Handle chained ECs as platform devices platform/chrome: cros_ec_rpmsg: Add host command AP sleep state support platform/chrome: chromeos_laptop: drop checks of NULL-safe functions platform/chrome: wilco_ec: Add batt_ppid_info command to telemetry driver
2019-09-17Merge tag 'media/v5.4-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - a new sensor driver for ov5675 - a new platform driver for Allwinner A10 sensor interface - some new remote controller keymaps - some cosmetic changes at V4L2 core in order to avoid #ifdefs and to merge two core modules into one - removal of bcm2048 radio driver from staging - removal of davinci_vpfe video driver from staging - regression fix since Kernel 5.1 at the legacy VideoBuffer version 1 core - added some documentation for remote controller protocols - pixel format documentation was split on two files - lots of other driver improvements and cleanups * tag 'media/v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (321 commits) media: videobuf-core.c: poll_wait needs a non-NULL buf pointer media: sun4i: Make sun4i_csi_formats static media: imx: remove unused including <linux/version.h> media: stm32-dcmi: Delete an unnecessary of_node_put() call in dcmi_probe() media: pvrusb2: qctrl.flag will be uninitlaized if cx2341x_ctrl_query() returns error code media: em28xx: Fix exception handling in em28xx_alloc_urbs() media: don't do a 31 bit shift on a signed int media: use the BIT() macro media: ov9650: add a sanity check media: aspeed-video: address a protential usage of an unitialized var media: vicodec: make life easier for static analyzers media: remove include stdarg.h from some drivers v4l2-core: fix coding style for the two new c files media: v4l2-core: Remove BUG() from i2c and spi helpers media: v4l2-core: introduce a helper to unregister a i2c subdev media: v4l2-core: introduce a helper to unregister a spi subdev media: v4l2-core: move i2c helpers out of v4l2-common.c media: v4l2-core: move spi helpers out of v4l2-common.c media: v4l2-core: Module re-organization media: usbvision: Remove dead code ...
2019-09-05media: videobuf-core.c: poll_wait needs a non-NULL buf pointerHans Verkuil
poll_wait uses &buf->done, but buf is NULL. Move the poll_wait to later in the function once buf is correctly set and only call it if it is non-NULL. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: bb436cbeb918 ("media: videobuf: fix epoll() by calling poll_wait first") Cc: <stable@vger.kernel.org> # for v5.1 and up Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-09-02mfd / platform: cros_ec: Reorganize platform and mfd includesEnric Balletbo i Serra
There is a bit of mess between cros-ec mfd includes and platform includes. For example, we have a linux/mfd/cros_ec.h include that exports the interface implemented in platform/chrome/cros_ec_proto.c. Or we have a linux/mfd/cros_ec_commands.h file that is non related to the multifunction device (in the sense that is not exporting any function of the mfd device). This causes crossed includes between mfd and platform/chrome subsystems and makes the code difficult to read, apart from creating 'curious' situations where a platform/chrome driver includes a linux/mfd/cros_ec.h file just to get the exported functions that are implemented in another platform/chrome driver. In order to have a better separation on what the cros-ec multifunction driver does and what the cros-ec core provides move and rework the affected includes doing: - Move cros_ec_commands.h to include/linux/platform_data/cros_ec_commands.h - Get rid of the parts that are implemented in the platform/chrome/cros_ec_proto.c driver from include/linux/mfd/cros_ec.h to a new file include/linux/platform_data/cros_ec_proto.h - Update all the drivers with the new includes, so - Drivers that only need to know about the protocol include - linux/platform_data/cros_ec_proto.h - linux/platform_data/cros_ec_commands.h - Drivers that need to know about the cros-ec mfd device also include - linux/mfd/cros_ec.h Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Tested-by: Gwendal Grignou <gwendal@chromium.org> Series changes: 3 - Fix dereferencing pointer to incomplete type 'struct cros_ec_dev' (lkp) Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-09-02mfd / platform: cros_ec: Move cros-ec core driver out from MFDEnric Balletbo i Serra
Now, the ChromeOS EC core driver has nothing related to an MFD device, so move that driver from the MFD subsystem to the platform/chrome subsystem. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Tested-by: Gwendal Grignou <gwendal@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-08-30media: sun4i: Make sun4i_csi_formats staticMaxime Ripard
The sun4i_csi_formats array is only used in sun4i_v4l2.c, so it doesn't make any sense to have it !static. [Sakari Ailus: const static -> static const] Reported-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-12 21:46:57 +0000