| Age | Commit message (Collapse) | Author |
|---|
|
Automatic kernel fuzzing led to a WARN about invalid pipe direction in
the mceusb driver:
------------[ cut here ]------------
usb 6-1: BOGUS control dir, pipe 80000380 doesn't match bRequestType 40
WARNING: CPU: 0 PID: 2465 at drivers/usb/core/urb.c:410
usb_submit_urb+0x1326/0x1820 drivers/usb/core/urb.c:410
Modules linked in:
CPU: 0 PID: 2465 Comm: kworker/0:2 Not tainted 5.19.0-rc4-00208-g69cb6c6556ad #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.13.0-1ubuntu1.1 04/01/2014
Workqueue: usb_hub_wq hub_event
RIP: 0010:usb_submit_urb+0x1326/0x1820 drivers/usb/core/urb.c:410
Code: 7c 24 40 e8 ac 23 91 fd 48 8b 7c 24 40 e8 b2 70 1b ff 45 89 e8
44 89 f1 4c 89 e2 48 89 c6 48 c7 c7 a0 30 a9 86 e8 48 07 11 02 <0f> 0b
e9 1c f0 ff ff e8 7e 23 91 fd 0f b6 1d 63 22 83 05 31 ff 41
RSP: 0018:ffffc900032becf0 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff8881100f3058 RCX: 0000000000000000
RDX: ffffc90004961000 RSI: ffff888114c6d580 RDI: fffff52000657d90
RBP: ffff888105ad90f0 R08: ffffffff812c3638 R09: 0000000000000000
R10: 0000000000000005 R11: ffffed1023504ef1 R12: ffff888105ad9000
R13: 0000000000000040 R14: 0000000080000380 R15: ffff88810ba96500
FS: 0000000000000000(0000) GS:ffff88811a800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffe810bda58 CR3: 000000010b720000 CR4: 0000000000350ef0
Call Trace:
<TASK>
usb_start_wait_urb+0x101/0x4c0 drivers/usb/core/message.c:58
usb_internal_control_msg drivers/usb/core/message.c:102 [inline]
usb_control_msg+0x31c/0x4a0 drivers/usb/core/message.c:153
mceusb_gen1_init drivers/media/rc/mceusb.c:1431 [inline]
mceusb_dev_probe+0x258e/0x33f0 drivers/media/rc/mceusb.c:1807
The reason for the warning is clear enough; the driver sends an
unusual read request on endpoint 0 but does not set the USB_DIR_IN bit
in the bRequestType field.
More importantly, the whole situation can be avoided and the driver
simplified by converting it over to the relatively new
usb_control_msg_recv() and usb_control_msg_send() routines. That's
what this fix does.
Link: https://lore.kernel.org/all/CAB7eexLLApHJwZfMQ=X-PtRhw0BgO+5KcSMS05FNUYejJXqtSA@mail.gmail.com/
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: stable@vger.kernel.org
Reported-and-tested-by: Rondreis <linhaoguo86@gmail.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/YwkfnBFCSEVC6XZu@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
driver will enable the vpu core when request the first instance
on the core.
one vpu core can only support 8 streaming instances in the same
time, the instance won't be added to core's list before streamon.
so the actual instance count may be greater then the number in
the core's list.
in pm resume callback, driver will resume the core immediately if
core's list is not empty.
but this check is not accurate,
if suspend during one instance is requested, but not streamon,
then after suspend, the core won't be resume, and led to instance failure.
use the request_count instead of the core's list to check
whether is the core needed to resume immediately after suspend.
And it can make the pm suspend and resume callback more clear.
Fixes: 9f599f351e86 ("media: amphion: add vpu core driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
video_unregister_device will release device internally. There is no need to
call video_device_release after video_unregister_device.
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
decoder will report the colorspace information
which is parsed from the sequence header,
if they are unspecified, just let application to determine it,
don't change it in driver.
Fixes: 6de8d628df6ef ("media: amphion: add v4l2 m2m vpu decoder stateful driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
adjust the value range of gop size from [0, 65535] to [1, 8000].
when the gop size is set to a too large value,
it may affect the encoded picture quality.
so constrain it to a reasonable range.
Fixes: 0401e659c1f92 ("media: amphion: add v4l2 m2m vpu encoder stateful driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
For format vc1, the amphion vpu requires driver to
help insert some custom startcode before sequence and frame.
the startcode is different for vc1l and vc1g format.
But the sequence startcode is only needed at the beginning,
and it's not expected after seek.
driver need to treat the codec header and the first frame after seek
as a normal frame, and insert picture startcode for it.
In previous patch, I just fix it for vc1l format,
and should fix the similar issue for vc1g too.
Fixes: e670f5d672ef (media: amphion: only insert the first sequence startcode for vc1l format)
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Now that we've transitioned all users to vb2_find_buffer API,
remove the unused vb2_find_timestamp().
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
V4L2_MPEG_VIDEO_BITRATE_MODE_CBR is the only bitrate mode supported
by the mediatek driver. The other bitrates must be skipped in
QUERY_MENU.
Fixes: d8e8aa866ed8 ("media: mediatek: vcodec: Report supported bitrate modes")
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Getting mt8188's chip name according to encoder compatible name.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
1: add mt8188's compatible name: mediatek,mt8188-vcodec-dec.
2: mt8188 is lat single core architecture, using mtk_lat_sig_core_pdata to
initialize private data.
3: Getting mt8188's chip name according to decoder compatible name.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
There is only one device mutex to lock vb2_queue when running
multi-instance encoding, it can be set by each encoder context.
[hverkuil: fix q_mutex documentation in the header]
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Usually, the real bitstream width and height will set to driver
by vidioc_s_fmt, and vidioc_try_fmt() does align to get the
buffer width and height, driver calculate the encoded bitstream
crop information through them. The aligned resolution will be set
as real resolution now if user didn't set crop info by
V4L2_SEL_TGT_CROP, and the encoded bitstream may exist green line
because of crop information error.
Fixs: 'b6c57d313f5f8 ("media: mtk-vcodec: venc: remove redundant code")'
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The "platform_get_resource(pdev, IORESOURCE_IRQ, 0)" is no longer
used after commit a1a2b7125e107("of/platform: Drop static setup of
IRQ resource from DT core"), so just remove the function in
encoder driver to avoid driver probe failed.
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add mt8188's compatible "mediatek,mt8188-vcodec-enc".
Add mt8188's device private data "mt8188_pdata".
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Encoder driver got iova from IOMMU is 34-bit, for example:
Here is the sample code:
encoder input frame buffer dma address is:
frm_buf =
vb2_dma_contig_plane_dma_addr(&vb2_v4l2_buffer->vb2_buf, 0);
the value of frm_buf is 0x1_ff30_0000.
encoder driver got the frm_buf and send the iova to SCP firmware
through SCP IPI message, then write to encoder hardware in SCP.
The iova is stored in IPI message as uint32_t data type, so the
value will be truncated from *0x1_ff30_0000* to *0xff30_0000*,
and then *0xff30_0000* will be written to encoder hardware, but
IOMMU will help to add the high *0x1_* bit back, so IOMMU can
translate the iova to PA correctly, encoder hardware can access
the correct memory for encoding.
Another reason to do this is the encoder hardware can't access
the 34-bit iova, IOMMU will help to add the remaining high bits
of iova. But for mt8188, encoder hardware can access 34-bit iova
directly, and encoder driver need write all 34 bits because
IOMMU can't help driver do this if the hardware support access
34-bit iova.
For the reasons above, this patch is added to support transfer
34-bit iova between kernel and SCP encoder driver. Use uint64_t
data type to store the iova, for compatibility with old chipsets,
add some new struct definitions for 34-bit.
[hverkuil: initialize wb and wb_34 to NULL]
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
CAL HW interrupts are inherently racy. If we get both start and end
interrupts, we don't know what has happened: did the DMA for a single
frame start and end, or did one frame end and a new frame start?
Usually for normal pixel frames we get the interrupts separately. If
we do get both, we have to guess. The assumption in the code is that the
active vertical area is larger than the blanking vertical area, and thus
it is more likely that we get the end of the old frame and the start of
a new frame.
However, for embedded data, which is only a few lines high, we always
get both interrupts. Here the assumption is that we get both for the
same frame.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Instead of handling the WDMA START and END interrupts separately, we
need to handle both at the same time to better manage the inherent race
conditions related to CAL interrupts.
Change the code so that we have a single function,
cal_irq_handle_wdma(), which gets two booleans, start and end, as
parameters, which allows us to manage the race conditions in the
following patch.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The userspace needs a way to match received metadata buffers to pixel
data buffers. The obvious way to do this is to use the CSI-2 frame
number, as both the metadata and the pixel data have the same frame
number as they come from the same frame.
However, we don't have means to convey the frame number to userspace. We
do have the 'sequence' field, which with a few tricks can be used for
this purpose.
To achieve this, track the frame number for each virtual channel and
increase the sequence for each virtual channel by frame-number -
previous-frame-number, also taking into account the eventual wrap of the
CSI-2 frame number. If the CSI-2 peripheral does not support frame
numbers, CAL increases the frame number register by one each frame.
This way we get a monotonically increasing sequence number which is
common to all streams using the same virtual channel.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Rename 'sd_state' parameters to 'state'. There are no other states, so
there is no ambiguity.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
'ret' is initialized needlessly in cal_legacy_try_fmt_vid_cap(). We can
also move the variable to the for block, which is the only place where
it is used.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
I expect that the hardware will have limited this to 16, but just in
case it hasn't, check for this corner case.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Use the proper define for the maximum CEC message length instead of
hardcoding it.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
After a successful call to media_device_init() it is safer to call
media_device_cleanup().
Add the missing call in the error handling path of the probe, as already
done in the remove function.
[hverkuil: fixed a typo in the commit log]
Fixes: bd090d4d995a ("media: dw100: Add i.MX8MP dw100 dewarper driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
MythTv is unable to scan channels with APUs with the Renior IOMMU
that is also contained in the Cezanne line of APUs. This issue
was discovered on the 5.15 version the kernel. This patch adds
the IOMMU PCI ID to the broken_dev_id array.
This patch was developed with 5.19 of the media_tree repo.
[hverkuil: cleaned up the commit log a bit]
Signed-off-by: Daniel Lee Kruse <daniel.lee.kruse@proton.me>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
rga_parse_dt is missing a error return, so if some of the resources
return DEFER_PROBE, probe will succeed without these resources.
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Co-developed-by: Jarrah Gosbell <kernel@undef.tools>
Signed-off-by: Jarrah Gosbell <kernel@undef.tools>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The commit ca9dc8d06ab6 ("media: airspy: respect the DMA coherency
rules") moves variable buf from stack to heap, however, it only frees
buf in the error handling code, missing deallocation in the success
path.
Fix this by freeing buf in the success path since this variable does not
have any references in other code.
Fixes: ca9dc8d06ab6 ("media: airspy: respect the DMA coherency rules")
Reported-by: syzbot+bb25f85e5aa482864dc0@syzkaller.appspotmail.com
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasolution.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
When the driver calls cx88_risc_buffer() to prepare the buffer, the
function call may fail, resulting in a empty buffer and null-ptr-deref
later in buffer_queue().
The following log can reveal it:
[ 41.822762] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI
[ 41.824488] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[ 41.828027] RIP: 0010:buffer_queue+0xc2/0x500
[ 41.836311] Call Trace:
[ 41.836945] __enqueue_in_driver+0x141/0x360
[ 41.837262] vb2_start_streaming+0x62/0x4a0
[ 41.838216] vb2_core_streamon+0x1da/0x2c0
[ 41.838516] __vb2_init_fileio+0x981/0xbc0
[ 41.839141] __vb2_perform_fileio+0xbf9/0x1120
[ 41.840072] vb2_fop_read+0x20e/0x400
[ 41.840346] v4l2_read+0x215/0x290
[ 41.840603] vfs_read+0x162/0x4c0
Fix this by checking the return value of cx88_risc_buffer()
[hverkuil: fix coding style issues]
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In fimc_is_register_subdevs(), we need to call of_node_put() for
the reference 'i2c_bus' when breaking out of the
for_each_compatible_node() which has increased the refcount.
Fixes: 9a761e436843 ("[media] exynos4-is: Add Exynos4x12 FIMC-IS driver")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Deprecate the hexium_gemini, hexium_orion, mxb and ttpci saa7146-based
drivers: these drivers do not use the vb2 framework for video streaming,
instead it uses the old videobuf framework.
We want to get rid of these old drivers, so deprecated these for future
removal.
[hverkuil: update MAINTAINERS file]
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Deprecate the dm644x_ccdc, dm355_cddc and dm365_isif davinci drivers:
all three depend on the vpfe_capture driver, and that driver does not
use the vb2 framework for video streaming, instead it uses the old
videobuf framework.
We want to get rid of these old drivers, so deprecated these for future
removal.
Note that include/media/davinci/vpfe_capture.h can't be moved to staging
since it is used in arch/arm/mach-davinci/davinci.h.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Deprecate the fsl-viu driver. This driver does not use the vb2 framework
for video streaming, instead it uses the old videobuf framework.
We want to get rid of these old drivers, so deprecated it for future
removal.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Deprecate the tm6000 driver. This driver does not use the vb2 framework
for video streaming, instead it uses the old videobuf framework.
We want to get rid of these old drivers, so deprecated it for future
removal.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Deprecate the zr364xx driver. This driver does not use the vb2 framework
for video streaming, instead it uses the old videobuf framework.
We want to get rid of these old drivers, so deprecated it for future
removal.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Deprecate the meye driver. This driver does not use the vb2 framework
for video streaming, instead it implements its own version.
We want to get rid of these old drivers, so deprecated it for future
removal.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Deprecate the cpia2 driver. This driver does not use the vb2 framework
for video streaming, instead it implements its own version.
We want to get rid of these old drivers, so deprecated it for future
removal.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The term 'videobuf' typically refers to the old videobuf version 1
framework. Avoid using this word in drivers that are converted to
vb2.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
These terms typically refer to the old version 1 videobuf framework.
It is confusing to use them for the vb2 framework, so reword these
comments.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
It is confusing to refer to vb2 structures with 'videobuf', since
that typically is used to refer to the old videobuf version 1
framework.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
It is confusing to use the term 'videobuf' or 'video-buf' since that
usually refers to the old videobuf version 1 framework. Rename to
'videobuf2' or vb2.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Remove the dead code under NGENE_V4L.
Among others, this removes references to the old videobuf framework
that isn't actually used by this driver.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The zoran driver can be moved back to mainline after it has been
converted by Corentin Labbe to vb2.
Note that the zoran driver no longer supports video output, but
video capture is working fine now.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Delete the redundant word 'the'.
Signed-off-by: wangjianli <wangjianli@cdjrlc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Delete the redundant word 'of'.
Signed-off-by: wangjianli <wangjianli@cdjrlc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Delete the redundant word 'of'.
Signed-off-by: wangjianli <wangjianli@cdjrlc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Delete the redundant word 'of'.
Signed-off-by: wangjianli <wangjianli@cdjrlc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Delete the redundant word 'of'.
Signed-off-by: wangjianli <wangjianli@cdjrlc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The double `the' is duplicated in the comment, remove one.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The double `is' is duplicated in the comment, remove one.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The double `for' is duplicated in the comment, remove one.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Replace 'the the' with 'the' in the comment.
[hverkuil: the the -> that the]
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
