| Age | Commit message (Collapse) | Author |
|---|
|
Add missing "dvdd" (Digital circuit power) entry into ov5693_supply_names
array
Signed-off-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Instead of hardcode OV5693_NUM_SUPPLIES in a define is better use
ARRAY_SIZE function to count the number of supplies from
ov5693_supply_names array
Signed-off-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Where iteration over links for an entity is clearly assuming that
all of those links are data links, use the new iterator to guarantee
that assumption is met.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Iterating over the links for an entity is a somewhat common need
through the media subsystem, but generally the assumption is that
they will all be data links. To meet that assumption add a new macro
that iterates through an entity's links and skips non-data links.
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Implement V4L2_SEL_TGT_CROP_BOUNDS query in get_selection subdev op
for this sensor. This is required e.g. to bind it to STM32MP15x DCMI.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
stm32-dcmi calls its source subdev with v4l2_subdev_call() using a
v4l2_subdev_state constructed on stack. This means that init_cfg is
never called for that state, and a source subdev that depends on the
init_cfg call may break.
A new macro has been added for this particular purpose, which properly
initializes the state, so let's use v4l2_subdev_call_state_try() here.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Marek Vasut <marex@denx.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
VIDEO_V4L2 no longer exists, instead use VIDEO_DEV. Without this change
this driver cannot be selected.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The VIDEO_V4L2_SUBDEV_API Kconfig symbol is mostly selected
automatically, with a a handful of drivers still using it as a
dependency. Fix them to use selection, and drop the symbol title text to
not expose it for manual selection.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add the missing gpiod_set_value_cansleep() and clk_disable_unprepare()
before return from ov7251_set_power_on() in the error handling case.
Fixes: 9e1d3012cc10 ("media: i2c: Remove .s_power() from ov7251")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The sun6i-mipi-csi2 and sun6i-a83t-mipi-csi2 drivers depend on the generic
MIPI D-PHY support. Select it. This fixes a linking problem when either of
these drivers is enabled and GENERIC_PHY_MIPI_DPHY is disabled.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Extend the format sanitization code in the framework to handle invalid
values for the colorspace-related fields.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Extend vivid to support the newly added YUVA and YUVX pixel formats
through the TPG.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Extend the TPG to support generating the newly added YUVA and YUVX pixel
formats.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The new YUVA and YUVX are permutations of the existing AYUV and XYUV
formats. They are use by the NXP i.MX8 ISI hardware.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
This partially reverts commit fd9f8050e355d7fd1e126cd207b06c96cde7f783,
and changes things so that the capability string fields of the encoder
conform to their requirements.
The driver name field should contain the actual driver name, not some
otherwise unused string macro from the driver. To make this clear,
copy the name from the driver's name field.
The card name for the video encoder previously held a static platform
name that was fixed to match MT8173. This obviously doesn't make sense
for newer chips. Since commit fd9f8050e355 ("media: mediatek: vcodec:
Change encoder v4l2 capability value"), this field was changed to hold
the driver's name, or "mtk-vcodec-dec". This doesn't make much sense
either, since this still doesn't reflect what chip this is.
Instead, fill in the card name with "MTxxxx video encoder" with the
proper chip number.
Since commit f2d8b6917f3b ("media: v4l: ioctl: Set bus_info in
v4l_querycap()"), the V4L2 core provides a default value for the
bus_info field for platform and PCI devices. This value will match
the default value for media devices added by commit cef699749f37
("media: mc: Set bus_info in media_device_init()"). These defaults
are stable and device-specific.
Drop the custom capability bus_info from the mtk-vcodec encoder
driver, and use the defaults.
As this patch removes the last usage of MTK_VCODEC_DRV_NAME, remove
the macro as well.
Fixes: fd9f8050e355 ("media: mediatek: vcodec: Change encoder v4l2 capability value")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
This partially reverts commit a8a7a278c56ad3b4ddd4db9a960e0537d032b0b3,
and changes things so that the capability string fields of the decoder
conform to their requirements.
This recent change caused ChromeOS's decoder to no longer function. This
is due to ChromeOS using the driver name field to match the video device
with its accompanying media device. After the change, they no longer
matched.
The driver name field should contain the actual driver name, not some
otherwise unused string macro from the driver. To make this clear,
copy the name from the driver's name field.
The card name for the video decoder previously held a static platform
name that was fixed to match MT8173. This obviously doesn't make sense
for newer chips. Since commit a8a7a278c56a ("media: mediatek: vcodec:
Change decoder v4l2 capability value"), this field was changed to hold
the driver's name, or "mtk-vcodec-dec". This doesn't make much sense
either, since this still doesn't reflect what chip this is.
Instead, fill in the card name with "MTxxxx video decoder" with the
proper chip number.
Since commit f2d8b6917f3b ("media: v4l: ioctl: Set bus_info in
v4l_querycap()"), the V4L2 core provides a default value for the
bus_info field for platform and PCI devices. This value will match
the default value for media devices added by commit cef699749f37
("media: mc: Set bus_info in media_device_init()"). These defaults
are stable and device-specific.
Drop the custom capability bus_info from the mtk-vcodec decoder
driver, and use the defaults. This also fixes the long standing
issue where the media device used for the stateless decoder didn't
have its bus_info set, and would never match its accompanying video
device.
Fixes: a8a7a278c56a ("media: mediatek: vcodec: Change decoder v4l2 capability value")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Pressing a button on a remote control unit will typically lead to
messages being sent several times per second until the button is released.
Some remote control units indicate long key presses by sending
special "repeat" messages, for which the protocol driver calls
rc_repeat(). Other units repeat the same message over and over,
which will be handled by calling rc_keydown().
The function rc_keydown() never set the LIRC "repeat" flag to distinguish
repeated messages that were sent due to a long keypress, and messages
sent due to repeated short keypresses. While a user-space program may
implement special logic to distinguish long keypresses, it is much simpler
to be able to rely on the flag.
Commit de142c32410649e64d44928505ffad2176a96a9e ("media: lirc: implement
reading scancode") would never set the LIRC_SCANCODE_FLAG_REPEAT flag.
Commit b66218fddfd29f315a103db811152ab0c95fb054
("media: lirc: ensure lirc device receives nec repeats") fixed it up for
rc_repeat() but not rc_keydown().
Signed-off-by: Marko Mäkelä <marko.makela@iki.fi>
Co-developed-by: Sean Young <sean@mess.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Drivers should use dev_err()
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
After 'buf_in' change to pointer, the sizeof() is not correct buffer
size, it should be MAX_PACKET.
Fixes: b3f820b905c9 ("media: igorplugusb: respect DMA coherency")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Future additions to the ent_config[] could break the association between
the index of the struct vimc_ent_config entries in the ent_config[] array,
and the index defined by the enum proposed in the previous patch. Using
designated initializers solves this by linking the 2 together clearly in
code and prevents the array not reflecting the enum. There is no
functional change intended.
Suggested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Daniel Oakley <daniel.oakley@ideasonboard.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The data_links array was hard to read and understand. By implementing
enumerated vimc data link entities, clarity has been improved when
defining data_links. This therefore should help new programmers to
understand the codebase better. There is no functional change intended.
Suggested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Daniel Oakley <daniel.oakley@ideasonboard.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
When introducing the lens controller, it became apparent that the vimc
entity type names were hard to understand, e.g. vimc_len_type refers to the
lens. The names of the vimc entity types have been expanded to make the
code easier to understand. There is no functional change intended.
Suggested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Daniel Oakley <daniel.oakley@ideasonboard.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add lens to vimc driver and link them with sensors using ancillary links.
Provides an example of ancillary link usage.The lens supports
FOCUS_ABSOLUTE control.
Test example: With default vimc topology
> media-ctl -p
Media controller API version 5.18.0
...
- entity 28: Lens A (0 pad, 0 link)
type V4L2 subdev subtype Lens flags 0
device node name /dev/v4l-subdev6
- entity 29: Lens B (0 pad, 0 link)
type V4L2 subdev subtype Lens flags 0
device node name /dev/v4l-subdev7
> v4l2-ctl -d /dev/v4l-subdev7 -C focus_absolute
focus_absolute: 0
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Yunke Cao <yunkec@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
For camera sensor devices the firmware information of which comes from
non-DT (or some ACPI variants), the kernel makes the information visible
to the drivers in a form similar to DT. This takes place through device's
secondary fwnodes, in which case also the secondary fwnode needs to be
heterogenously (endpoint vs. device) matched.
Fixes: 1f391df44607 ("media: v4l2-async: Use endpoints in __v4l2_async_nf_add_fwnode_remote()")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
For format V4L2_PIX_FMT_VC1_ANNEX_L,
the amphion vpu requires driver to help insert some custom startcode
before sequence and frame.
but only the first sequence startcode is needed,
the extra startcode will cause decoding error.
So after seek, we don't need to insert the sequence startcode.
In other words, for V4L2_PIX_FMT_VC1_ANNEX_L,
the vpu doesn't support dynamic resolution change.
Fixes: 145e936380edb ("media: amphion: implement malone decoder rpc interface")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
1. prevent to allocate buffer to firmware during abort
2. release buffer when clear the slots
Fixes: 6de8d628df6ef ("media: amphion: add v4l2 m2m vpu decoder stateful driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
are processed
Don't set last_buffer_dequeued during dynamic resolution change,
otherwise it may be cleared in handling resolution change,
as streamoff may be called in dynamic resolution change.
Normally, this does not happen.
But we encounter a special testcase,
User issue V4L2_DEC_CMD_STOP after enqueue one buffer
that only contains codec config header, but not any frame data.
So VPU report the parsed resolution, then report the eos event.
So driver should notify user to handle resolution change first,
after it's handled, set the last_buffer_dequeued.
then the user can exit decoding normally.
Otherwise the user may be stalled.
Fixes: 6de8d628df6ef ("media: amphion: add v4l2 m2m vpu decoder stateful driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The decoder parameters are stored in each instance's context data. This
needs to be initialized per-instance, but a previous fix incorrectly
changed it to only be initialized for the first opened instance. This
resulted in subsequent instances not correctly signaling the requirement
for the Requests API.
Fix this by calling the initializing function outside of the
v4l2_fh_is_singular() conditional block.
Fixes: faddaa735c20 ("media: mediatek: vcodec: Initialize decoder parameters after getting dec_capability")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Right now the decoder maintains two separate lists for supported pixel
formats and frame sizes. Getting the supported frame sizes for the
current set format is a bit convoluted, requiring a search through
the separate frame size list. The frame sizes are used to clamp and
align requested resolutions.
Instead, the frame size structure could be embedded inside the pixel
format structure. Getting one also gets the other. And since the
the driver already keeps pointers to the current set format, getting
the frame sizes becomes straightforward.
Do just that. Move v4l2_frmsize_stepwise inside mtk_video_fmt, and get
rid of mtk_codec_framesizes.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
This partially reverts commit b018be06f3c7 ("media: mediatek: vcodec:
Read max resolution from dec_capability").
After the previous patches:
- media: mediatek: vcodec: decoder: Fix 4K frame size enumeration
- media: mediatek: vcodec: decoder: Skip alignment for default resolution
- media: mediatek: vcodec: decoder: Fix resolution clamping in TRY_FMT
the max_{width,height} fields in |struct mtk_vcodec_ctx| no longer have
any real users. Remove them.
Fixes: b018be06f3c7 ("media: mediatek: vcodec: Read max resolution from dec_capability")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In commit b018be06f3c7 ("media: mediatek: vcodec: Read max resolution
from dec_capability"), TRY_FMT clamps the resolution to the maximum
that was previously set either by default 1080p or the limit set by a
previous S_FMT call. This does not make sense when doing TRY_FMT for
the output side, which may have different capabilities.
Instead, for the output side, find the maximum resolution based on the
pixel format requested. For the capture side, find the maximum
resolution based on the currently set output format.
The maximum resolution is found from the list of per-format frame
sizes, so the patch "media: mediatek: vcodec: dec: Fix 4K frame size
enumeration" is needed.
Fixes: b018be06f3c7 ("media: mediatek: vcodec: Read max resolution from dec_capability")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The default resolution of 64x64 is already aligned, according to the
call to v4l_bound_align_image() in mtk_vcodec_dec_set_default_params().
Drop the redundant v4l_bound_align_image() call. This also removes one
usage of ctx->max_{width,height}.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
This partially reverts commit b018be06f3c7 ("media: mediatek: vcodec:
Read max resolution from dec_capability"). In this commit, the maximum
resolution ended up being a function of both the firmware capability and
the current set format.
However, frame size enumeration for output (coded) formats should not
depend on the format set, but should return supported resolutions for
the format requested by userspace.
Fix this so that the driver returns the supported resolutions correctly,
even if the instance only has default settings, or if the output format
is currently set to VP8F, which does not support 4K.
This adds an copy of special casing for !VP8 and 4K support. The other
existing copy will be removed when .max_{width,height} are removed from
|struct mtk_vcodec_ctx| in a subsequent patch.
Fixes: b018be06f3c7 ("media: mediatek: vcodec: Read max resolution from dec_capability")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
stepwise_fhd is the reference framesize variable, and should not be
altered. Make it constant.
Fixes: ("76250b48de79 media: mediatek: vcodec: Getting supported decoder format types")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The device_driver structure's of_match_table field exists
unconditionally, so there's no need for of_match_ptr(). This fixes a
compiler warning when test-compiling on non-OF platforms:
drivers/media/platform/renesas/rcar_drif.c:1470:34: warning: unused variable 'rcar_drif_of_table' [-Wunused-const-variable]
static const struct of_device_id rcar_drif_of_table[] = {
^
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
There is an unexpected word 'with' in the comments that need to be
dropped.
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The .open subdev op is not always called soon enough to initialize
the default crop settings. Move all this initialization into .init_cfg
op instead.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add compatible for MT9P006 sensor, which is older variant of MT9P031
and compatible with this driver.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The driver has been extensively tested in an i.MX6-based system.
AR0521 is a 5.7 mm x 4.3 mm, 5 MPix RGGB MIPI/HiSPi BSI CMOS sensor
from On Semiconductor.
Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The image format produced by the sensor is controlled by two registers,
whose values computation is open coded in ov5640_set_framefmt().
As we have a list of formats already, move the OV5640_REG_FORMAT_CONTROL00
and OV5640_REG_ISP_FORMAT_MUX_CTRL register values to the static list
of formats instead of open coding it.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The format enumeration list is shared between CSI-2 and DVP modes.
This lead to the enumeration of unsupported format variants in both
modes.
Separate the list of DVP and CSI-2 formats and create helpers to access
the correct one.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The ov5640 driver supports different sizes for different mbus_codes.
In particular:
- 8bpp modes: high resolution sizes (>= 1280x720)
- 16bpp modes: all sizes
- 24bpp modes: low resolutions sizes (< 1280x720)
Adjust the image sizes according to the above constraints.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The ov5640 driver supports different sizes for different mbus_codes.
In particular:
- 8bpp modes: high resolution sizes (>= 1280x720)
- 16bpp modes: all sizes
- 24bpp modes: low resolutions sizes (< 1280x720)
Restrict the frame sizes enumerations to the above constraints.
While at it, make sure the fse->mbus_code parameter is valid, and return
-EINVAL if it's not.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add support for BGR888 image format.
No existing media bus codes describe exactly the way data is transferred
on the CSI-2 bus. This is not a new issue, the CSI-2 YUV422 8-bit format
is described by MEDIA_BUS_FMT_UYVY8_1X16 which is an arbitrary
convention and not an exact match. Use the MEDIA_BUS_FMT_BGR888_1X24 to
follow the same convention, based on the order in which bits are
transmitted over the CSI-2 bus when producing images in RGB24 format.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The driver already supports the 2X8_[LE|BE] variants of RGB565
formats.
As for CSI-2 the 2X8 variants do not apply, add RGB565_1X16 variant
with little-endian ordering of components as required by the CSI-2
specifications.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Parse the device properties and register the rotation and orientation
V4L2 controls using v4l2_ctrl_new_fwnode_properties().
Remove the open-coded parsing of the rotation property and assume the
DTS is correct is providing either <0> or <180> as possible rotations.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Implement the get_selection pad operation for the OV5640 sensor driver.
The supported targets report the sensor's native size, the active pixel
array size and the analog crop rectangle from which the image is
produced.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Implement the init_cfg pad operation to initialize the subdev state
format to the default one.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Now that the frame duration can be controlled by tuning the VBLANK
duration in CSI-2 mode, fix all modes definitions to comply with the
reported FPS.
All modes run at 30 FPS except for full-resolution mode 2592x1944
which runs at 15FPS.
Tested on a 2 data lanes setup in UYVY and RGB565 modes in CSI-2 mode.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The current implementation of ov5640_find_mode() fails if the
frame rate programmed with s_frame_interval doesn't match the
maximum frame rate for the current mode.
This causes issues when moving from one mode with higher FPS to another
one which only supports a lower FPS range with tools like media-ctl.
It also forces users that do not use s_frame_interval(), but rather
configure blankings explicitly, to adjust the programmed FPS range to
avoid failures.
For this reason, remove the FPS check from ov5640_find_mode() and only
perform it at s_frame_interval() time.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
