summaryrefslogtreecommitdiff
path: root/drivers/mfd
AgeCommit message (Collapse)Author
2013-04-05mfd: Add ChromeOS EC implementationSimon Glass
This is the base EC implementation, which provides a high level interface to the EC for use by the rest of the kernel. The actual communcations is dealt with by a separate protocol driver which registers itself with this interface. Interrupts are passed on through a notifier. A simple message structure is used to pass messages to the protocol driver. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Che-Liang Chiou <clchiou@chromium.org> Signed-off-by: Jonathan Kliegman <kliegs@chromium.org> Signed-off-by: Luigi Semenzato <semenzato@chromium.org> Signed-off-by: Olof Johansson <olofj@chromium.org> Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-03Merge tag 'extcon-arizona-v3.10' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc into char-misc-next Mark writes: extcon: arizona: Updates for v3.10 There's a bunch of different things in this series, I can split them out if need be: - Support for configuring the button detection circuit to reflect the accessories supplied with the system. - Improvements in the HPDET based detection scheme. - Additional robustness against more pathological use cases. - A few small standalone fixes.
2013-04-01mfd: wm5102: Add registers for microphone detection level configurationMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-26mfd: pm8921: Disable driver until it gets fixedDavid Brown
The pm8921 driver has been broken for a while now, but was prevented from compiling because the SSBI bus driver was missing. Now that SSBI is present, pm8921 causes compile fails. Until the pm8921 driver is fixed, mark it as BROKEN to prevent compiles from failing. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David Brown <davidb@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-26Merge tag 'arizona-extcon-asoc' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc into asoc-arizona ASoC/extcon: arizona: Fix interaction between HPDET and headphone outputs This patch series covers both ASoC and extcon subsystems and fixes an interaction between the HPDET function and the headphone outputs - we really shouldn't run HPDET while the headphone is active. The first patch is a refactoring to make the extcon side easier.
2013-03-26Merge tag 'arizona-extcon-asoc' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc into char-misc-next Mark writes: ASoC/extcon: arizona: Fix interaction between HPDET and headphone outputs This patch series covers both ASoC and extcon subsystems and fixes an interaction between the HPDET function and the headphone outputs - we really shouldn't run HPDET while the headphone is active. The first patch is a refactoring to make the extcon side easier.
2013-03-25SSBI: Remove MSM_ prefix from SSBI driversDavid Brown
Although the SSBI sub is currently only used on MSM SoCs, it is still a bus in its own right. Remove this msm_ prefix from the driver and it's symbols. Clients can now refer directly to ssbi_write() and ssbi_read(). Signed-off-by: David Brown <davidb@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-21mfd: wm5102: Add additional speaker control registersMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-18Merge branch 'for-mfd-and-power' of ↵Anton Vorontsov
git://git.linaro.org/people/ljones/linux-3.0-ux500 From Lee Jones <lee.jones@linaro.org>: "Please find the next instalment of the AB8500 Power drivers upgrade. A lot of work has taken place on the internal development track, but little effort has gone into mainlining it. There is a large backlog of patches which are in need of forward-porting, then upstreaming. This patch-set aims to make a large dent into them." Conflicts: drivers/mfd/ab8500-gpadc.c
2013-03-15mfd: twl4030-madc: Remove __exit_p annotationArnd Bergmann
4740f73fe5 "mfd: remove use of __devexit" removed the __devexit annotation on the twl4030_madc_remove function, but left an __exit_p() present on the pointer to this function. Using __exit_p was as wrong with the devexit in place as it is now, but now we get a gcc warning about an unused function. In order for the twl4030_madc_remove to work correctly in built-in code, we have to remove the __exit_p. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-12mfd: ab8500-gpadc: Complain if we fail to enable vtvout LDOAxel Lin
Since commit c8801a8e "regulator: core: Mark all get and enable calls as __must_check", we must check return value of regulator_enable() to silence below build warning. CC drivers/mfd/ab8500-gpadc.o drivers/mfd/ab8500-gpadc.c: In function 'ab8500_gpadc_runtime_resume': drivers/mfd/ab8500-gpadc.c:598:18: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] drivers/mfd/ab8500-gpadc.c: In function 'ab8500_gpadc_probe': drivers/mfd/ab8500-gpadc.c:655:18: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] Also convert to devm_regulator_get(), this fixes a missing regulator_put() call in ab8500_gpadc_remove(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-12mfd: twl4030-audio: Fix argument type for twl4030_audio_disable_resource()Mark Brown
Looks like the conversion to enum was missed for the definition of this function, the declaration has been updated. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-12mfd: tps65912: Declare and use tps65912_irq_exit()Mark Brown
Clean up interrupts on exit, silencing a sparse warning caused by tps65912_irq_exit() being defined but not prototyped as we go. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-12mfd: palmas: Provide irq flags through DT/platform dataLaxman Dewangan
Currently driver sets the irq type to IRQF_TRIGGER_LOW which is causing interrupt registration failure in ARM based SoCs as: [ 0.208479] genirq: Setting trigger mode 8 for irq 118 failed (gic_set_type+0x0/0xf0) [ 0.208513] dummy 0-0059: Failed to request IRQ 118: -22 Provide the irq flags through platform data if device is registered through board file or get the irq type from DT node property in place of hardcoding the irq flag in driver to support multiple platforms. Also configure the device to generate the interrupt signal according to flag type. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-12mfd: Make AB8500_CORE select POWER_SUPPLY to fix build errorAxel Lin
This patch fixes below build error when CONFIG_POWER_SUPPLY is not set. drivers/built-in.o: In function `ab8500_power_off': drivers/mfd/ab8500-sysctrl.c:37: undefined reference to `power_supply_get_by_name' drivers/mfd/ab8500-sysctrl.c:53: undefined reference to `power_supply_get_by_name' make: *** [vmlinux] Error 1 Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-12mfd: omap-usb-host: Actually update hostconfigRoger Quadros
The helper functions omap_usbhs_rev1_hostconfig() and omap_usbhs_rev2_hostconfig() don't write into the hostconfig register. Make sure that we write the return value into the hostconfig register. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07ab8500-fg: Add power cut feature for ab8505 and ab8540Lee Jones
Add support for a power cut feature which allows user to configure when ab8505 and ab8540 based platforms should shut down system due to low battery. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-03-07mfd: ab8500-debugfs: Trivially beautify the debugfs driverLee Jones
Just lots of white space corrections, changing some of the 4 space tabs to 8 and pulling back some of the double tabbing back into singles, such as the remaining of the driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-core: Hierarchical interrupt registersDariusz Szymczak
Make use of the hierarchical interrupt rergister called ITLatchHier1 - 3 also for the 8500 platform (currently the hierarchical interrupt registers are used only for the 8540 and 9540 platforms). This will make the interrupt routing go faster since fewer i2c reads need to made in the most common cases. Signed-off-by: Dariusz Szymczak <dariusz.xd.szymczak@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mian Yousaf KAUKAB <mian.yousaf.kaukab@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-debug: Convert to kstrtoul_from_usersrinidhi kasagar
Use kstrtoul_from_user for getting an unsigned long from userspace which is less error prone. Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-debug: Add explicit dependenciesLinus Walleij
As I am working on SPARSE_IRQ a number of implicit resource grabs in the kernel become evident. For example, some includes like <linux/irqs.h> would implicitly include <mach/irqs.h> and then from there <mach/db8500-regs.h>. In many cases it is masking the fact that drivers do not properly use resources to pass their dependencies, base addresses etc. So write explicit #include statements with TODO items to have this fixed the proper way to all drivers doing this. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-core: Add abx500-clk as an mfd child deviceUlf Hansson
Hierarchically, the abx500-clk shall be considered as a child of the ab8500 core. The abx500-clk is intiated at arch init and thus the clks will be available when clients needs them. Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com> Reviewed-by: Patrice CHOTARD <patrice.chotard@stericsson.com> Reviewed-by: Gabriel FERNANDEZ <gabriel.fernandez@stericsson.com> Reviewed-by: Philippe BEGNIC <philippe.begnic@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-debug: Add register map for ab8540.Lee Jones
Required to read out correct debug information from the AB chip. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-debugfs: Change AB8500 debug permissionsLee Jones
Enable group write permissions for ab8500 debug MFD driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-core: Show turn on status at bootMattias Wallin
Several states can be detected when a device is initially turned on. This patch displays these states in the log. If none of the states are true, then we report that too. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-debug: Add ADC input channel usb_id in debugfsLee Jones
Signed-off-by: Yang QU <yang.qu@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Alexandre BOURDIOL <alexandre.bourdiol@stericsson.com> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-debugfs: Dump sim registersLee Jones
This patch allows to dump the SIM registers from debugfs. It will temporary change the config to allow APE side to read the SIM registers. Note that this read can cause problem on modem side since the modem can't read these registers while the operation is ongoing. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-sysctrl: AB8505 doesn't have SYSCLKREQ5..8Rabin Vincent
So we're removing support for it. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Tested-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-core: Add additional resources to ab8505_iddet_resourcesLee Jones
Add VBUS_DET_R, VBUS_DET_F IRQ, ID_DET_PLUGR and ID_DET_PLUGF IRQ information to ab8505_iddet_resources. These are required to get interrupts for AB8505 cut-2. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-gpadc: Optimise GPADC driverLee Jones
Optimise GPADC driver: * for code readability and maintenance by grouping similar cheking * for performance by grouping several writing to control register Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-debug: Add support for the AB8540Lee Jones
Allow GPADC debug information to be shown when executing on an AB8540 based platform. Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@stericsson.com> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-gpadc: Add support for the AB8540Lee Jones
This patch enables the GPADC to work on AB8540 based platforms. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-sysctrl: Add new reset functionLee Jones
Add a new reset function which uses the AB WD with 0 timeout. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-debug: Add support for ab8505 and ab9540Lee Jones
Make it possible to dump all registers in ab8505 and ab9540. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-debugfs: Add tests for ab8540 based platform initialisationsLee Jones
Signed-off-by: Alexandre Torgue <alexandre.torgue@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Maxime COQUELIN <maxime.coquelin@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-sysctrl: Error check clean upMarcus Danielsson
Add error checks to see if sysctrl was probed as it should. If the sysctrl_dev is not set the return value is -EINVAL. Signed-off-by: Marcus Danielsson <marcus.danielsson@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Per FORLIN <per.forlin@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-debug: Add wake-up infoJonas Aaberg
Add information regarding what ab interrupt that caused a wake-up from suspend in <debugfs>/ab8500/interrupts. Also print the name of the interrupts, not just the numbers. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Per FORLIN <per.forlin@stericsson.com> Tested-by: Mattias WALLIN <mattias.wallin@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-debug: Better error handling on crashJonas Aaberg
Stop trying to read i2c registers if one fail. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-core: Add Interrupt support for ab8540Lee Jones
ITSource/ITLatch 7, 8, 9 and 10 don't exist on AB8540. This patch replaces them with '-1' in the interrupt list, and handles the '-1' in the code accordingly. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-core: Rework MFD sub-device initialisation structuresLee Jones
Here we're separating Battery Management devices into their own structure, removing the common device structure & redistribute them amongst the individual platform structs and completing the population of them. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-core: Add ADC support for ab8540Lee Jones
Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-debug: Function to save all ABB registers to memLee Jones
Dump function that stores all readable ABB registers to a memory areas where they can be accessed from dump file. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-debug: Print banks in hexMattias Wallin
This patch changes bank prints to use hex value. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Daniel WILLERUD <daniel.willerud@stericsson.com> Tested-by: Jonas ABERG <jonas.aberg@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-core: APE Interrupts are not clearedLee Jones
There are missing register descriptions from the AB8505 user manual and these need to be masked so that the APEINT line can toggle. This patch also affects the behaviour of AB9540. Signed-off-by: Marcus Cooper <marcus.xm.cooper@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Maxime COQUELIN <maxime.coquelin@stericsson.com> Reviewed-by: Alexandre TORGUE <alexandre.torgue@stericsson.com> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-gpadc: Add gpadc hw conversionLee Jones
Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-gpadc: Reread on failureJonas Aaberg
Reread the gpadc once upon failure. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-gpadc: Implemented suspend/resumeDaniel WILLERUD
suspend/resume methods implemented to prevent suspend while the gpadc driver is busy. Signed-off-by: Daniel WILLERUD <daniel.willerud@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-07mfd: ab8500-sysctrl: Update correct turn on statusRajkumar Kasirajan
In L9540, turn_on_status register is not updated correctly if the device is rebooted with AC/USB charger connected. Due to this, the device boots android instead of entering into charge only mode. Read the AC/USB status register to detect the charger presence and update the turn on status manually. Signed-off-by: Rajkumar Kasirajan <rajkumar.kasirajan@stericsson.com> Signed-off-by: Per Forlin <per.forlin@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Rupesh KUMAR <rupesh.kumar@stericsson.com> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com> Tested-by: Rupesh KUMAR <rupesh.kumar@stericsson.com> Tested-by: Philippe LANGLAIS <philippe.langlais@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2013-03-06mfd: wm5102: Map in additional FLL control registersMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-27mfd: convert to idr_alloc()Tejun Heo
Convert to the much saner new idr interface. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit (git 2.34.1) at 2025-09-22 20:31:45 +0000