summaryrefslogtreecommitdiff
path: root/drivers/mmc
AgeCommit message (Collapse)Author
2015-01-20mmc: sh_mobile_sdhi: add new macro for mmc_host to sh_mobile_sdhiKuninori Morimoto
getting struct sh_mobile_sdhi from struct mmc_host needs to use complex container_of(). This patch adds new host_to_priv macro to get it easily. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-20mmc: sh_mobile_sdhi: tidyup mmc_data->bus_shift for latest SoCKuninori Morimoto
Latest SDHI on Renesas has expand register mapping. update mmc_data->bus_shift for it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-20mmc: sh_mobile_sdhi: remove .init/.cleanupKuninori Morimoto
No one is using .init/.cleanup callback function. Let's remove these. sdhi_ops and .cd_wakeup are also removed Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-20mmc: tmio: enable SoC specific DMA buswidth settingsKuninori Morimoto
Renesas SDHI which is based on TMIO driver has 2 type SoC. 1st one is used as SH-Mobile series, and 2nd is R-Car series. R-Car series SoC has DMA buswidth setting register which enables 32bit access. This patch adds .dma_buswidth and enables it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-20mmc: tmio: add .enable_dma on tmio_mmc_dmaKuninori Morimoto
Some controllers need DMA special register/setting. This patch adds new .enable_dma callback for it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-20mmc: tmio: tmio_mmc_data has .dma_rx_offsetKuninori Morimoto
Current .dma_rx_offset is implemented under tmio_mmc_dma. It goes to tmio_mmc_data by this patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-20mmc: tmio: tmio_mmc_data has .alignment_shiftKuninori Morimoto
Current .alignment_shift is implemented under tmio_mmc_dma. It goes to tmio_mmc_data by this patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-20mmc: tmio: tmio_mmc_host has .bus_shiftKuninori Morimoto
Current .bus_shift is implemented under tmio_mmc_data. It goes to tmio_mmc_host by this patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-20mmc: tmio: tmio_mmc_host has .multi_io_quirkKuninori Morimoto
Current .multi_io_quirk is implemented under tmio_mmc_data. It goes to tmio_mmc_host by this patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-20mmc: tmio: tmio_mmc_host has .clk_disableKuninori Morimoto
Current .clk_disable is implemented under tmio_mmc_data. It goes to tmio_mmc_host by this patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-20mmc: tmio: tmio_mmc_host has .clk_enableKuninori Morimoto
Current .clk_enable is implemented under tmio_mmc_data. It goes to tmio_mmc_host by this patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-20mmc: tmio: tmio_mmc_host has .write16_hookKuninori Morimoto
Current .write16_hook is implemented under tmio_mmc_data. It goes to tmio_mmc_host by this patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-20mmc: tmio: tmio_mmc_host has .dmaKuninori Morimoto
Current .dma is implemented under tmio_mmc_data. It goes to tmio_mmc_host by this patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-20mmc: tmio: add tmio_mmc_host_alloc/free()Kuninori Morimoto
Current tmio_mmc driver is using tmio_mmc_data for driver/platform specific data/callback, and it is needed for tmio_mmc_host_probe() function. Because of this style, include/linux/mfd/tmio.h header has tmio driver/framework specific data which is not needed from platform. This patch adds new tmio_mmc_host_alloc/free() as cleanup preparation. tmio driver specific data/callback will be implemented in tmio_mmc_host, and platform specific data/callback will be implemented in tmio_mmc_data in this cleanup. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-20mmc: sdhci: host: add new f_sdh30Vincent Yang
This patch adds new host controller driver for Fujitsu SDHCI controller f_sdh30. Signed-off-by: Vincent Yang <Vincent.Yang@tw.fujitsu.com> Signed-off-by: Andy Green <andy.green@linaro.org> Signed-off-by: Tetsuya Takinishi <t.takinishi@jp.fujitsu.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-20mmc: sdhci: add a quirk for single block transactionsVincent Yang
This patch defines a quirk to disable the block count for single block transactions. It is a preparation and will be used by Fujitsu SDHCI controller f_sdh30 driver. Signed-off-by: Vincent Yang <Vincent.Yang@tw.fujitsu.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-20mmc: sdhci: add a quirk for tuning work aroundVincent Yang
This patch defines a quirk for tuning work around for some sdhci host controller. It sets both SDHCI_CTRL_EXEC_TUNING and SDHCI_CTRL_TUNED_CLK for tuning. It is a preparation and will be used by Fujitsu SDHCI controller f_sdh30 driver. Signed-off-by: Vincent Yang <Vincent.Yang@tw.fujitsu.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-20mmc: sdhci: add a voltage switch callback functionVincent Yang
This patch adds a callback function to do controller-specific actions when switching voltages. It is a preparation and will be used by Fujitsu SDHCI controller f_sdh30 driver. Signed-off-by: Vincent Yang <Vincent.Yang@tw.fujitsu.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: dw_mmc: Power on vqmmc in MMC_POWER_ON, not MMC_POWER_UPDoug Anderson
If we power up vqmmc in MMC_POWER_ON then we end up turning it on before mmc_power_up() sets the signal voltage. That's not so great since we might be powering it up at the wrong voltage. Note that this is how Yuvaraj originally coded things up in <https://patchwork.kernel.org/patch/4401231/> but he changed it on my suggestion. Apparently I was wrong. Reported-by: Alexandru M Stan <amstan@chromium.org> Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: host: sdhci: Added a space before (Mohammad Jamal
This patch solves the coding style issue by adding a space before ( Signed-off-by: Mohammad Jamal <md.jamalmohiuddin@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: sdhci-pxav3: fix pm unbalanced issue in -> remove()Jisheng Zhang
This patch calls pm_runtime_put_noidle() to restore the device's usage counter in the ->remove() implementation. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: sdhci-pxav3: fix unbalanced clock issues during probeJisheng Zhang
Commit 0dcaa2499b7d ("sdhci-pxav3: Fix runtime PM initialization") tries to fix one hang issue caused by calling sdhci_add_host() on a suspended device. The fix enables the clock twice, once by clk_prepare_enable() and another by pm_runtime_get_sync(), meaning that the clock will never be gated at runtime PM suspend. I observed the power consumption regression on Marvell BG2Q SoCs. In fact, the fix is not correct. There still be a very small window during which a runtime suspend might somehow occur after pm_runtime_enable() but before pm_runtime_get_sync(). This patch fixes all of the two problems by just incrementing the usage counter before pm_runtime_enable(). It also adjust the order of disabling runtime pm and storing the usage count in the error path to handle clock gating properly. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Cc: <stable@vger.kernel.org> # v3.11+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: sdhci: Always init buf_ready_intAdrian Hunter
There is no point making the initialization of buf_ready_int conditional on host version. Simplify by just doing it always. Note that the other conditional initializations will be removed when the new way of doing re-tuning is taken into use. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: core: Move mmc_card_removed() into mmc_start_request()Adrian Hunter
Both callers of mmc_start_request() call mmc_card_removed() so move that call into mmc_start_request(). This patch is preparation for adding re-tuning support. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: core: Simplify by adding mmc_execute_tuning()Adrian Hunter
For each MMC, SD and SDIO there is code that holds the clock, calls ops->execute_tuning, and releases the clock. Simplify the code a bit by providing a separate function to do that. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: omap_hsmmc: use mmc_of_parse to parse common mmc configuration.NeilBrown
This ensures that all standard options are available to hsmmc, In particular, I need cap-power-off-card. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: omap_hsmmc: use slot-gpio library for gpio support.NeilBrown
Using the common code removes some code duplication, and makes it easier to switch to using mmc_of_parse() which will remove more duplication. This uses the new mmc_gpio_request_cd_isr to provide a non-standard interrupt service routine for card-detect interrupts. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: slot-gpio: Allow host driver to provide isr for card-detect interruptsNeilBrown
One of the reasons omap_hsmmc doesn't use the slot-gpio library is that it has some non-standard functionality in the card-detect interrupt service routine. To make it possible for omap_hsmmc (and maybe others) to be converted to use slot-gpio, add 'mmc_gpio_request_cd_isr' which provide an alternate isr to be register by the slot-gpio code. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: sdhci-acpi: fix copy'n'paste typos in the commentsAndy Shevchenko
Just fix the comments, no functional changes. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: sd: add reset bus_ops callbackJohan Rudholm
Enable power cycle and re-initialization of SD cards via the reset bus_ops. Power cycling a buggy SD card sometimes helps it get back on track. Signed-off-by: Johan Rudholm <johanru@axis.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: core: refactor the hw_reset routinesJohan Rudholm
Move the (e)MMC specific hw_reset code from core.c into mmc.c. Call the code from the new bus_ops member "reset". This also allows for adding a SD card specific reset procedure. Signed-off-by: Johan Rudholm <johanru@axis.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: core: always check status after resetJohan Rudholm
Always check if the card is alive after a successful reset. This allows us to remove mmc_hw_reset_check(), leaving mmc_hw_reset() as the only card reset interface. Signed-off-by: Johan Rudholm <johanru@axis.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: Add SDIO function devicetree subnode parsingSascha Hauer
This adds SDIO devicetree subnode parsing to the mmc core. While SDIO devices are runtime probable they sometimes need nonprobable additional information on embedded systems, like an additional gpio interrupt or a clock. This patch makes it possible to supply this information from the devicetree. SDIO drivers will find a pointer to the devicenode in their devices of_node pointer. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> [hdegoede@redhat.com: Misc. cleanups] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: sdhci-acpi: Remove redundant runtime PM idle callbackUlf Hansson
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: sdhci: use pipeline mmc requests to improve performanceHaibo Chen
This patch is based on the patches by Per Forlin, Tony Lin and Ryan QIAN. This patch complete the API 'post_req' and 'pre_req' in sdhci host side, Test Env: 1. i.MX6Q-SABREAUTO board, CPU @ 996MHz, use ADMA in uSDHC controller. 2. Test command: $ echo 1 > /proc/sys/vm/drop_caches write to sd card: $ dd if=/dev/zero of=/dev/mmcblk0 bs=1M count=2000 conv=fsync read the sd card: $ dd if=/dev/mmcblk0 of=/dev/null bs=1M count=2000 3. TOSHIBA 16GB SD3.0 card, running at 4 bit, SDR104 @ 198MHZ Performance with and without this patch: ------------------------------------------------- | | read speed | write speed | |------------------------------------------------ | with this patch | ~76.7 MB/s | ~23.3 MB/s | |------------------------------------------------ |without this patch | ~60.5 MB/s | ~22.5 MB/s | ------------------------------------------------- 4. SanDisk 8GB SD3.0 card, running at 4 bit, DDR50 @ 50MHZ Performance with and without this patch: ------------------------------------------------- | | read speed | write speed | |------------------------------------------------ | with this patch | ~40.5 MB/s | ~15.6 MB/s | |------------------------------------------------ |without this patch | ~36.1 MB/s | ~14.1 MB/s | ------------------------------------------------- 5. Kingston 8GB SD2.0 card, running at 4 bit, High-speed @ 50MHZ Performance with and without this patch: ------------------------------------------------- | | read speed | write speed | |------------------------------------------------ | with this patch | ~22.7 MB/s | ~8.2 MB/s | |------------------------------------------------ |without this patch | ~21.3 MB/s | ~8.0 MB/s | ------------------------------------------------- 6. About eMMC, Sandisk 8GB eMMC on i.MX6DL-sabresd board, CPU @ 792MHZ, eMMC running at 8 bit, DDR52 @ 52MHZ. Performance with and without this patch: ------------------------------------------------- | | read speed | write speed | |------------------------------------------------ | with this patch | ~37.3 MB/s | ~10.5 MB/s | |------------------------------------------------ |without this patch | ~33.4 MB/s | ~10.5 MB/s | ------------------------------------------------- Signed-off-by: Haibo Chen <haibo.chen@freescale.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: sdhci: Remove redundant ADMA page boundary warningsAndrew Gabbasov
The bounce buffer, used for misaligned bytes for ADMA access, resides wholly within the (align_sz)-aligned word, just by construction. The page addresses are aligned to (align_sz), either for 4 or 8 bytes alignment, so that the aligned word resides wholly within a single page and can't cross the page boundary. So, the bounce buffer can't cross the page boundary too. That's why the warnings are never hit, and can be safely removed. Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: core: Make tuning block patterns staticUlf Hansson
Since previous patches removed the need for the tuning block patterns to be exported, let's move them close to the mmc_send_tuning() API. Those are now intended to be used only by the mmc core. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
2015-01-19mmc: dw_mmc: Convert to mmc_send_tuning()Ulf Hansson
Instead of having a local hack taking care of sending the tuning command and as well to verify the response pattern, let's convert to the common mmc_send_tuning() API. This change affects the Exynos variant, since it's the only one which support the dw_mmc's ->execute_tuning() callback. It's seems like dw_mmc internal logic expects failed data transfers to be ended using a stop command. Let the tuning requests also fall into this category, since there are data transfer involved. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
2015-01-19mmc: mmci: Do pm_runtime_put() after the host has been addedUlf Hansson
Previously the pm_runtime_put() caused the device to be runtime PM suspended, but then immediately being resumed when we add the host. Prevent this unnecessary runtime PM suspend/resume cycle during ->probe() by moving the call to pm_runtime_put() after mmc_add_host(). Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: sdhci-pci: Remove redundant runtime PM idle callbackUlf Hansson
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: sdhci-esdhc-imx: Fixup runtime PM conditions during ->probe()Ulf Hansson
By configure runtime PM prior we enable the use of it, we close the gap for strange and unhandled conditions. Moreover it makes us rely on the driver core, after finalized ->probe(), to request an inactive device to become runtime PM idle/suspended, which earlier potentially could happen already at pm_runtime_set_autosuspend_delay(). Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: sdhci-esdhc-imx: Fixup ->remove()Ulf Hansson
Since sdhci_remove_host() access the device, we need to make sure it's runtime PM resumed. To handle clock gating properly in remove, we first have to make sure the clocks are ungated. To fix both these issues, by invoking pm_runtime_get_sync() early in ->remove() callback. Later once we disabled runtime PM, we can restore the usage count. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: mvsdio: don't use devm_pinctrl_get_select_default() in probeWolfram Sang
Since commit ab78029ecc34 (drivers/pinctrl: grab default handles from device core), we can rely on device core for setting the default pins. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: dw_mmc: remove unnecessary debug messageBeomho Seo
This patch remove unnecessary 'out of memory' message on dw mmc driver. Signed-off-by: Beomho Seo <beomho.seo@samsung.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: rtsx: swap function position to avoid pre declarationMicky Ching
move function sd_read_data()/sd_write_data() behind sd_send_cmd_get_rsp() to avoid pre-declaration. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: rtsx: add support for sdio cardMicky Ching
Modify transfer mode for support sdio card, send cmd and data at the same time for read data transfer, but send data after cmd for write data transfer. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: rtsx: add helper function to simplify codeMicky Ching
To support sdio card, transfer mode need make a change, this need to split code and use it in different place, Add new function to simplify repeat operation. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: rtsx: init cookie at probe/card_eventMicky Ching
host->cookie is used for handle async request, we should init it to negative value when new card inserted, make cookie value invalid. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: rtsx: add dump_reg_range to simplify dump registerMicky Ching
Add a new function to dump register within a range. We print 1 register a line before this patch, this may make debug info too long when we add more register to dump. The new dump_reg_range() dump to 8 register a line, and it is easy to use. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: slot-gpio: Rework how to handle allocation of slot-gpio dataUlf Hansson
By moving the allocation of the slot-gpio data into mmc_alloc_host(), we can remove the slot-gpio internal calls to mmc_gpio_alloc(). This means mmc_gpio_alloc() has now only one caller left, which consequence allow us to simplify and remove some of the slot-gpio code. Additionally, this makes the slot-gpio mutex redundant, so let's remove it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-22 20:50:24 +0000