summaryrefslogtreecommitdiff
path: root/drivers/mmc
AgeCommit message (Collapse)Author
2020-07-13mmc: cqhci: Demote faux kerneldoc header down to basic comment blockLee Jones
cqhci_host_alloc_tdl()'s function header is the only one in kerneldoc format. Which seems odd as it's not part of an external API and isn't referenced anywhere else. Seeing as there has also been no attempt to describe the expected function arguments either, we're going to assume that this is not actually a bona fide kerneldoc use-case. Fixes the following W=1 kernel build warning: drivers/mmc/host/cqhci.c:163: warning: Function parameter or member 'cq_host' not described in 'cqhci_host_alloc_tdl' Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ritesh Harjani <riteshh@codeaurora.org> Cc: Asutosh Das <asutoshd@codeaurora.org> Cc: Venkat Gopalakrishnan <venkatg@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200701124702.908713-15-lee.jones@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci-msm: Demote faux kerneldoc header down to basic comment blockLee Jones
__sdhci_msm_set_clock()'s function header is the only one in kerneldoc format. Which seems odd as it's not part of an external API and isn't referenced anywhere else. Seeing as there has also been no attempt to describe the expected function arguments either, we're going to assume that this is not actually a bona fide kerneldoc use-case. Fixes the following W=1 kernel build warnings: drivers/mmc/host/sdhci-msm.c:1595: warning: Function parameter or member 'host' not described in '__sdhci_msm_set_clock' drivers/mmc/host/sdhci-msm.c:1595: warning: Function parameter or member 'clock' not described in '__sdhci_msm_set_clock' Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: linux-arm-msm@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200701124702.908713-14-lee.jones@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci-of-arasan: Correct formatting and provide missing function arg(s)Lee Jones
Kerneldoc expects arg descriptions to be in the format '@.*: '. If either the '@' or the ':' is omitted then kerneldoc complains that the description is missing. Add the missing ':' here and provide a new description for 'value'. Fixes the following kernel build W=1 warnings: drivers/mmc/host/sdhci-of-arasan.c:1394: warning: Function parameter or member 'host' not described in 'sdhci_arasan_update_support64b' drivers/mmc/host/sdhci-of-arasan.c:1394: warning: Function parameter or member 'value' not described in 'sdhci_arasan_update_support64b' drivers/mmc/host/sdhci-msm.c:1887:6: warning: no previous prototype for ‘sdhci_msm_dump_vendor_regs’ [-Wmissing-prototypes] Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Xiaobo Xie <X.Xie@freescale.com> Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Soeren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200701124702.908713-12-lee.jones@linaro.org Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: rtsx_usb_sdmmc: Remove set but unused variable 'err'Lee Jones
Seeing as sd_wait_data_idle() returns void and only a very specific read value is checked, there doesn't seem to be a good reason to check the return value of rtsx_pci_read_register(). So remove the assignment and definition of 'err'. Squashes the following W=1 kernel build warning: drivers/mmc/host/rtsx_usb_sdmmc.c: In function ‘sd_wait_data_idle’: drivers/mmc/host/rtsx_usb_sdmmc.c:657:6: warning: variable ‘err’ set but not used [-Wunused-but-set-variable] 657 | int err, i; | ^~~ Cc: Roger Tseng <rogerable@realtek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200701124702.908713-11-lee.jones@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: rtsx_pci_sdmmc: Remove set but unused variable 'err'Lee Jones
Seeing as sd_wait_data_idle() returns void and only a very specific read value is checked, there doesn't seem to be a good reason to check the return value of rtsx_pci_read_register(). So remove the assignment and definition of 'err'. Squashes the following W=1 kernel build warning: drivers/mmc/host/rtsx_pci_sdmmc.c: In function ‘sd_wait_data_idle’: drivers/mmc/host/rtsx_pci_sdmmc.c:678:6: warning: variable ‘err’ set but not used [-Wunused-but-set-variable] 678 | int err, i; | ^~~ Cc: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200701124702.908713-10-lee.jones@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: dw_mmc-exynos: Add kerneldoc descriptions of for 'dev' argsLee Jones
Provide missing documentation for dw_mci_exynos_suspend_noirq() and dw_mci_exynos_resume_noirq() function headers. Fixes the following W=1 kernel build warnings: drivers/mmc/host/dw_mmc-exynos.c:184: warning: Function parameter or member 'dev' not described in 'dw_mci_exynos_suspend_noirq' drivers/mmc/host/dw_mmc-exynos.c:200: warning: Function parameter or member 'dev' not described in 'dw_mci_exynos_resume_noirq' Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Thomas Abraham <thomas.ab@samsung.com> Cc: linux-samsung-soc@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Link: https://lore.kernel.org/r/20200701124702.908713-9-lee.jones@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: core: Correct misspelling of 'mq' in mmc_init_request()'s docsLee Jones
Correcting this misspelling squashes the following W=1 build warning(s): mmc/core/queue.c:212: warning: Function parameter or member 'mq' not described in '__mmc_init_request' mmc/core/queue.c:212: warning: Excess function parameter 'q' description in '__mmc_init_request' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200701124702.908713-8-lee.jones@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: atmel-mci: Provide 2 new and correct 1 existing property descriptionLee Jones
'sg_len' and 'dma_conf' are missing correct kerneldoc documentation and 'buf_phys_addr' was misspelled. Correcting these issues fixes the following W=1 kernel build issues: mmc/host/atmel-mci.c:352: warning: Function parameter or member 'sg_len' not described in 'atmel_mci' mmc/host/atmel-mci.c:352: warning: Function parameter or member 'buf_phys_addr' not described in 'atmel_mci' mmc/host/atmel-mci.c:352: warning: Function parameter or member 'dma_conf' not described in 'atmel_mci' Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200701124702.908713-7-lee.jones@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: mtk-sd: Demote msdc_recheck_sdio_irq() function headerLee Jones
No other function in the file is documented using kerneldoc and no effort to document the function arguments have been made. It's a bit of an oddity to say the least. Let's downgrade it from kerneldoc to a standard comment block instead. Fixes the following W=1 kernel build warning: drivers/mmc/host/mtk-sd.c:1030: warning: Function parameter or member 'host' not described in 'msdc_recheck_sdio_irq' Cc: Chaotian Jing <chaotian.jing@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: linux-mediatek@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20200701124702.908713-6-lee.jones@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci-s3c: Provide documentation for missing struct propertiesLee Jones
Describe properties; ext_cd_irq, clk_rates and no_divider (x2). Squashes the following W=1 kernel build warnings: drivers/mmc/host/sdhci-s3c.c:126: warning: Function parameter or member 'ext_cd_irq' not described in 'sdhci_s3c' drivers/mmc/host/sdhci-s3c.c:126: warning: Function parameter or member 'clk_rates' not described in 'sdhci_s3c' drivers/mmc/host/sdhci-s3c.c:126: warning: Function parameter or member 'no_divider' not described in 'sdhci_s3c' drivers/mmc/host/sdhci-s3c.c:139: warning: Function parameter or member 'no_divider' not described in 'sdhci_s3c_drv_data' Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Link: https://lore.kernel.org/r/20200701124702.908713-5-lee.jones@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: core: Add missing documetation for 'mmc' and 'ios'Lee Jones
Remainder of the kerneldoc descriptions look present and correct. Fixes the following W=1 kernel build warnings: drivers/mmc/core/regulator.c:178: warning: Function parameter or member 'mmc' not described in 'mmc_regulator_set_vqmmc' drivers/mmc/core/regulator.c:178: warning: Function parameter or member 'ios' not described in 'mmc_regulator_set_vqmmc' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200701124702.908713-4-lee.jones@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: core: Provide description for sdio_set_host_pm_flags()'s 'flag' argLee Jones
Add missing kerneldoc entry for sdio_set_host_pm_flags()'s 'flag' function argument. Fixes the following W=1 kernel build warning: kernel/drivers/mmc/core/sdio_io.c:722: warning: Function parameter or member 'flags' not described in 'sdio_set_host_pm_flags' Cc: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200701124702.908713-3-lee.jones@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: core: Mark fixups as __maybe_unusedLee Jones
Not all source files which include quirks.h make use of the all of the available fixup information. When this happens the compiler complains that some constant variables are defined by never used. We can fix this by telling the compiler that this intentional by simply marking them as __maybe_unused. Fixes the following W=1 kernel build warnings: In file included from drivers/mmc/core/sdio.c:22: drivers/mmc/core/quirks.h:105:31: warning: ‘mmc_ext_csd_fixups’ defined but not used [-Wunused-const-variable=] 105 | static const struct mmc_fixup mmc_ext_csd_fixups[] = { | ^~~~~~~~~~~~~~~~~~ drivers/mmc/core/quirks.h:17:31: warning: ‘mmc_blk_fixups’ defined but not used [-Wunused-const-variable=] 17 | static const struct mmc_fixup mmc_blk_fixups[] = { | ^~~~~~~~~~~~~~ In file included from drivers/mmc/core/mmc.c:25: drivers/mmc/core/quirks.h:123:31: warning: ‘sdio_fixup_methods’ defined but not used [-Wunused-const-variable=] 123 | static const struct mmc_fixup sdio_fixup_methods[] = { | ^~~~~~~~~~~~~~~~~~ drivers/mmc/core/quirks.h:17:31: warning: ‘mmc_blk_fixups’ defined but not used [-Wunused-const-variable=] 17 | static const struct mmc_fixup mmc_blk_fixups[] = { | ^~~~~~~~~~~~~~ Cc: Andrei Warkentin <andreiw@motorola.com> Cc: Martin Mares <mj@ucw.cz> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200701124702.908713-2-lee.jones@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci-msm: Make function sdhci_msm_dump_vendor_regs() staticHulk Robot
Fix sparse build warning: drivers/mmc/host/sdhci-msm.c:1888:6: warning: symbol 'sdhci_msm_dump_vendor_regs' was not declared. Should it be static? Signed-off-by: Hulk Robot <hulkci@huawei.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200702020347.77214-1-weiyongjun1@huawei.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: renesas_sdhi_internal_dmac: Fix dma unmapping in error casesYoshihiro Shimoda
If this controller doesn't issue interrupt for response of command, this driver lacks to call dma_unmap_sg(). So, fix the issue by using end() of struct tmio_mmc_dma_ops. Reported-by: Takeshi Saito <takeshi.saito.xv@renesas.com> Fixes: 2a68ea7896e3 ("mmc: renesas-sdhi: add support for R-Car Gen3 SDHI DMAC") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1590044466-28372-4-git-send-email-yoshihiro.shimoda.uh@renesas.com Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: renesas_sdhi_internal_dmac: clean up the code for dma completeYoshihiro Shimoda
To add end() operation in the future, clean the code of renesas_sdhi_internal_dmac_complete_tasklet_fn(). No behavior change. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1590044466-28372-3-git-send-email-yoshihiro.shimoda.uh@renesas.com Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: tmio: core: Add end operation into tmio_mmc_dma_opsYoshihiro Shimoda
Related drivers like renesas_sdhi_internal_dmac are possible to lack dma unmaping in error cases (for example response timeout). Since tmio_mmc_finish_request() will be always called in any case, to fix the issue, add end operation into struct tmio_mmc_dma_ops and call the operation in tmio_mmc_finish_request() to call dma_ummap API by the related drivers correctly. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1590044466-28372-2-git-send-email-yoshihiro.shimoda.uh@renesas.com Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci-msm: Use internal voltage controlVeerabhadrarao Badiganti
On qcom SD host controllers voltage switching be done after the HW is ready for it. The HW informs its readiness through power irq. The voltage switching should happen only then. Use the internal voltage switching and then control the voltage switching using power irq. IO-bus supply of eMMC would be kept always-on. So set the load for this supply to configure it in LPM when eMMC is suspend state and in HPM when eMMC is active. Co-developed-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> Co-developed-by: Vijay Viswanath <vviswana@codeaurora.org> Signed-off-by: Vijay Viswanath <vviswana@codeaurora.org> Co-developed-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org> Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org> Link: https://lore.kernel.org/r/1592919288-1020-4-git-send-email-vbadigan@codeaurora.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: core: Set default power mode in mmc_alloc_host()Veerabhadrarao Badiganti
Set the default power mode, MMC_POWER_UNDEFINED, in mmc_alloc_host() rather than in mmc_start_host(). This enables host drivers to make use of the initial state during ->probe(). Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org> Link: https://lore.kernel.org/r/1592919288-1020-3-git-send-email-vbadigan@codeaurora.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci: Allow platform controlled voltage switchingVijay Viswanath
If vendor platform drivers are controlling whole logic of voltage switching, then sdhci driver no need control vqmmc regulator. So skip enabling/disable vqmmc from SDHC driver. Signed-off-by: Vijay Viswanath <vviswana@codeaurora.org> Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1592919288-1020-2-git-send-email-vbadigan@codeaurora.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci-acpi: For amd device set driver type as MMC_SET_DRIVER_TYPE_AAkshu Agrawal
HS400/HS200/eMMC HS doesn't have Preset Value register. Hence, sdhci_set_ios function overrides the value set by fmw to SDHCI_CTRL_DRV_TYPE_B. This patch sets drv_type to MMC_SET_DRIVER_TYPE_A so that host_control2 register gets updated with the required strength value. Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200623133347.4598-1-akshu.agrawal@amd.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci-esdhc-imx: dump internal IC debug status during errorHaibo Chen
USDHC of i.MX has internal IC debug register, which record the IC logical status. So dump these logical status in error condition, this can help analyzing issue. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1592985830-13038-1-git-send-email-haibo.chen@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdio: fix clock rate setting for SDR12/SDR25 modeHaibo Chen
In current code logic, when work in SDR12/SDR25 mode, the final clock rate is incorrect, just the legancy 400KHz, because the card->sw_caps.sd3_bus_mode do not has the flag SD_MODE_UHS_SDR12 or SD_MODE_UHS_SDR25. Besides, SDIO_SPEED_SDR12 is actually value 0, and every mode need to config the timing and clock rate, so remove the ‘if’ operator. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Tested-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/1592813959-5914-1-git-send-email-haibo.chen@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci_am654: Add support for clkbuf_sel propertyFaiz Abbas
Add support for writing new clkbuf_sel property for the J721e 4 bit IP. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Link: https://lore.kernel.org/r/20200619125801.9530-7-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci_am654: Update delay chain configurationFaiz Abbas
For speed modes where DLL is not enabled write to TXDLYCLK to enable transmitter delay chain mode. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Link: https://lore.kernel.org/r/20200619125801.9530-6-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci_am654: Fix conditions for enabling dllFaiz Abbas
The clock > CLOCK_TOO_SLOW_HZ condition gating phy configuration is only required because dll should not be enabled at too low a clock frequency or too low timing. Make sure that this condition only gates dll enablement. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Link: https://lore.kernel.org/r/20200619125801.9530-5-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci_am654: Add Support for SR2.0Faiz Abbas
Add Support for AM65x PG2.0. Use the SoC bus framework to fixup the driver data and skip do DLL calibration if the revision is 1.0 Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Link: https://lore.kernel.org/r/20200619125801.9530-4-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci_am654: Add flag for PHY calibrationFaiz Abbas
Not all controllers need calibration for the PHY DLL. Add a DLL_CALIB flag to indicate the same. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Link: https://lore.kernel.org/r/20200619125801.9530-3-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sh_mmcif: Use "kHz" for kilohertzGeert Uytterhoeven
"K" stands for "kelvin". While at it, make the spacing before units consistent. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200618080321.16678-1-geert+renesas@glider.be Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci-msm: Fix spelling mistakeFlavio Suligoi
Fix typo: "trigered" --> "triggered" Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200617151938.30217-1-f.suligoi@asem.it Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: mmci: add sdio datactrl mask for sdmmc revisionsLudovic Barre
This patch adds datactrl_mask_sdio for sdmmc revisions. sdmmc revisions used same bit of previous ST variant. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Link: https://lore.kernel.org/r/20200611132839.4515-1-ludovic.barre@st.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci-of-arasan: Add missed checks for devm_clk_register()Chuhong Yuan
These functions do not check the return value of devm_clk_register(): - sdhci_arasan_register_sdcardclk() - sdhci_arasan_register_sampleclk() Therefore, add the missed checks to fix them. Fixes: c390f2110adf1 ("mmc: sdhci-of-arasan: Add ability to export card clock") Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20200608162226.3259186-1-hslester96@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdio: Fix 1-bit mode for SD-combo cards during suspendYue Hu
Commit 6b5eda369ac3 ("sdio: put active devices into 1-bit mode during suspend") disabled 4-bit mode during system suspend. After this patch, commit 7310ece86ad7 ("mmc: implement SD-combo (IO+mem) support") used new sdio_enable_4bit_bus() instead of sdio_enable_wide() to support SD-combo cards, also for card resume. However, no corresponding support added during suspend. That is not correct. Let's fix it. Signed-off-by: Yue Hu <huyue2@yulong.com> Link: https://lore.kernel.org/r/20200609081431.6376-1-zbestahu@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdio: Enable SDIO 4-bit bus if not support SD_SCR_BUS_WIDTH_4 for SD ↵Yue Hu
combo card If the card type is SD combo(MMC_TYPE_SD_COMBO) and the memory part does not support wider bus(SD_SCR_BUS_WIDTH_4), nothing will be done except return 0. However, we should check whether IO part support wider bus or not. We should use available IO ability if supported. In addition, there's a duplicated check to MMC_CAP_4_BIT_DATA since sdio_enable_wide() will include that check. And we can also save one call site to sdio_enable_wide() after this change. Signed-off-by: Yue Hu <huyue2@yulong.com> Link: https://lore.kernel.org/r/20200608103009.5000-1-zbestahu@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdio: Return ret if sdio_disable_func() failsYue Hu
We should return any possible error returned by mmc_io_rw_direct() rather than only -EIO in sdio_disable_func() failure path. Signed-off-by: Yue Hu <huyue2@yulong.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20200604100102.13572-1-zbestahu@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci-tegra: Add comment for PADCALIB and PAD_CONTROL NVQUIRKSSowjanya Komatineni
This patch adds comments about NVQUIRKS HAS_PADCALIB and NEEDS_PAD_CONTROL. Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Link: https://lore.kernel.org/r/1591326240-28928-1-git-send-email-skomatineni@nvidia.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci-msm: Add interconnect bandwidth scaling supportPradeep P V K
Interconnect bandwidth scaling support is now added as a part of OPP. So, make sure interconnect driver is ready before handling interconnect scaling. Signed-off-by: Pradeep P V K <ppvk@codeaurora.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/1591691846-7578-2-git-send-email-ppvk@codeaurora.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: core: Always allow the card detect uevent to be consumedUlf Hansson
The approach to allow userspace ~5s to consume the uevent, which is triggered when a new card is inserted/initialized, currently requires the mmc host to support system wakeup. This is unnecessary limiting, especially for an mmc host that relies on a GPIO IRQ for card detect. More precisely, the mmc host may not support system wakeup for its corresponding struct device, while the GPIO IRQ still could be configured as a wakeup IRQ via enable_irq_wake(). To support all various cases, let's simply drop the need for the wakeup support. Instead let's always register a wakeup source and activate it for all card detect IRQs by calling __pm_wakeup_event(). Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20200529102341.12529-1-ulf.hansson@linaro.org
2020-07-13mmc: sdhci-of-aspeed: Fix clock divider calculationEddie James
When calculating the clock divider, start dividing at 2 instead of 1. The divider is divided by two at the end of the calculation, so starting at 1 may result in a divider of 0, which shouldn't happen. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Acked-by: Joel Stanley <joel@jms.id.au> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200709195706.12741-3-eajames@linux.ibm.com Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-10misc: rtsx: Add support new chip rts5228 mmc: rtsx: Add support MMC_CAP2_NO_MMCRicky Wu
In order to support new chip rts5228, the definitions of some internal registers and workflow have to be modified. Added rts5228.c rts5228.h for independent functions of the new chip rts5228 Signed-off-by: Ricky Wu <ricky_wu@realtek.com> Link: https://lore.kernel.org/r/20200706070259.32565-1-ricky_wu@realtek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-08mmc: remove the call to check_disk_changeChristoph Hellwig
The mmc driver doesn't support event notifications, which means that check_disk_change is a no-op. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-08mmc: sdhci-msm: Override DLL_CONFIG only if the valid value is suppliedVeerabhadrarao Badiganti
During DLL initialization, the DLL_CONFIG register value would be updated with the value supplied from the device-tree. Override this register only if a valid value is supplied. Fixes: 03591160ca19 ("mmc: sdhci-msm: Read and use DLL Config property from device tree file") Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org> Link: https://lore.kernel.org/r/1594213888-2780-1-git-send-email-vbadigan@codeaurora.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-06mmc: owl-mmc: Get rid of of_match_ptr() macroManivannan Sadhasivam
Remove the 'of_match_ptr()' macro to fix the warning when CONFIG_OF is not selected. drivers/mmc/host/owl-mmc.c:677:34: warning: unused variable 'owl_mmc_of_match' [-Wunused-const-variable] Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Link: https://lore.kernel.org/r/20200621025330.10561-1-mani@kernel.org Fixes: ff65ffe46d28 ("mmc: Add Actions Semi Owl SoCs SD/MMC driver") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-06-24blk-mq: move failure injection out of blk_mq_complete_requestChristoph Hellwig
Move the call to blk_should_fake_timeout out of blk_mq_complete_request and into the drivers, skipping call sites that are obvious error handlers, and remove the now superflous blk_mq_force_complete_rq helper. This ensures we don't keep injecting errors into completions that just terminate the Linux request after the hardware has been reset or the command has been aborted. Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-16mmc: meson-gx: limit segments to 1 when dram-access-quirk is neededNeil Armstrong
The actual max_segs computation leads to failure while using the broadcom sdio brcmfmac/bcmsdh driver, since the driver tries to make usage of scatter gather. But with the dram-access-quirk we use a 1,5K SRAM bounce buffer, and the max_segs current value of 3 leads to max transfers to 4,5k, which doesn't work. This patch sets max_segs to 1 to better describe the hardware limitation, and fix the SDIO functionality with the brcmfmac/bcmsdh driver on Amlogic G12A/G12B SoCs on boards like SEI510 or Khadas VIM3. Reported-by: Art Nikpal <art@khadas.com> Reported-by: Christian Hewitt <christianshewitt@gmail.com> Fixes: acdc8e71d9bb ("mmc: meson-gx: add dram-access-quirk") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200608084458.32014-1-narmstrong@baylibre.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-06-15sched,mmc: Convert to sched_set_fifo*()Peter Zijlstra
Because SCHED_FIFO is a broken scheduler model (see previous patches) take away the priority field, the kernel can't possibly make an informed decision. In this case, use fifo_low, because it only cares about being above SCHED_NORMAL. Effectively no change in behaviour. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Ingo Molnar <mingo@kernel.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-10Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This time around we have four lines of diff in the core framework, removing a function that isn't used anymore. Otherwise the main new thing for the common clk framework is that it is selectable in the Kconfig language now. Hopefully this will let clk drivers and clk consumers be testable on more than the architectures that support the clk framework. The goal is to introduce some Kunit tests for the framework. Outside of the core framework we have the usual set of various driver updates and non-critical fixes. The dirstat shows that the new Baikal-T1 driver is the largest addition this time around in terms of lines of code. After that the x86 (Intel), Qualcomm, and Mediatek drivers introduce many lines to support new or upcoming SoCs. After that the dirstat shows the usual suspects working on their SoC support by fixing minor bugs, correcting data and converting some of their DT bindings to YAML. Core: - Allow the COMMON_CLK config to be selectable New Drivers: - Clk driver for Baikal-T1 SoCs - Mediatek MT6765 clock support - Support for Intel Agilex clks - Add support for X1830 and X1000 Ingenic SoC clk controllers - Add support for the new Renesas RZ/G1H (R8A7742) SoC - Add support for Qualcomm's MSM8939 Generic Clock Controller Updates: - Support IDT VersaClock 5P49V5925 - Bunch of updates for HSDK clock generation unit (CGU) driver - Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs - Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver - Enable supply regulators for GPU gdscs on Qualcomm SoCs - Add support for Si5342, Si5344 and Si5345 chips - Support custom flags in Xilinx zynq firmware - Various small fixes to the Xilinx clk driver - A single minor rounding fix for the legacy Allwinner clock support - A few patches from Abel Vesa as preparation of adding audiomix clock support on i.MX - A couple of cleanups from Anson Huang for i.MX clk-sscg-pll and clk-pllv3 drivers - Drop dependency on ARM64 for i.MX8M clock driver, to support aarch32 mode on aarch64 hardware - A series from Peng Fan to improve i.MX8M clock drivers, using composite clock for core and bus clk slice - Set a better parent clock for flexcan on i.MX6UL to support CiA102 defined bit rates - A couple changes for EMC frequency scaling on Tegra210 - Support for CPU frequency scaling on Tegra20/Tegra30 - New clk gate for CSI test pattern generator on Tegra210 - Regression fixes for Samsung exynos542x and exynos5433 SoCs - Use of fallthrough; attribute for Samsung s3c24xx - Updates and fixup HDMI and video clocks on Meson8b - Fixup reset polarity on Meson8b - Fix GPU glitch free mux switch on Meson gx and g12 - A minor fix for the currently unused suspend/resume handling on Renesas RZ/A1 and RZ/A2 - Two more conversions of Renesas DT bindings to json-schema - Add support for the USB 2.0 clock selector on Renesas R-Car M3-W+" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (155 commits) clk: mediatek: Remove ifr{0,1}_cfg_regs structures clk: baikal-t1: remove redundant assignment to variable 'divider' clk: baikal-t1: fix spelling mistake "Uncompatible" -> "Incompatible" dt-bindings: clock: Add a missing include to MMP Audio Clock binding dt: Add bindings for IDT VersaClock 5P49V5925 clk: vc5: Add support for IDT VersaClock 5P49V6965 clk: Add Baikal-T1 CCU Dividers driver clk: Add Baikal-T1 CCU PLLs driver dt-bindings: clk: Add Baikal-T1 CCU Dividers binding dt-bindings: clk: Add Baikal-T1 CCU PLLs binding clk: mediatek: assign the initial value to clk_init_data of mtk_mux clk: mediatek: Add MT6765 clock support clk: mediatek: add mt6765 clock IDs dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC CLK: HSDK: CGU: add support for 148.5MHz clock CLK: HSDK: CGU: support PLL bypassing CLK: HSDK: CGU: check if PLL is bypassed first clk: clk-si5341: Add support for the Si5345 series ...
2020-06-07Merge tag 'char-misc-5.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the large set of char/misc driver patches for 5.8-rc1 Included in here are: - habanalabs driver updates, loads - mhi bus driver updates - extcon driver updates - clk driver updates (approved by the clock maintainer) - firmware driver updates - fpga driver updates - gnss driver updates - coresight driver updates - interconnect driver updates - parport driver updates (it's still alive!) - nvmem driver updates - soundwire driver updates - visorbus driver updates - w1 driver updates - various misc driver updates In short, loads of different driver subsystem updates along with the drivers as well. All have been in linux-next for a while with no reported issues" * tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (233 commits) habanalabs: correctly cast u64 to void* habanalabs: initialize variable to default value extcon: arizona: Fix runtime PM imbalance on error extcon: max14577: Add proper dt-compatible strings extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()' extcon: remove redundant assignment to variable idx w1: omap-hdq: print dev_err if irq flags are not cleared w1: omap-hdq: fix interrupt handling which did show spurious timeouts w1: omap-hdq: fix return value to be -1 if there is a timeout w1: omap-hdq: cleanup to add missing newline for some dev_dbg /dev/mem: Revoke mappings when a driver claims the region misc: xilinx-sdfec: convert get_user_pages() --> pin_user_pages() misc: xilinx-sdfec: cleanup return value in xsdfec_table_write() misc: xilinx-sdfec: improve get_user_pages_fast() error handling nvmem: qfprom: remove incorrect write support habanalabs: handle MMU cache invalidation timeout habanalabs: don't allow hard reset with open processes habanalabs: GAUDI does not support soft-reset habanalabs: add print for soft reset due to event habanalabs: improve MMU cache invalidation code ...
2020-06-01mmc: sdhci-msm: Clear tuning done flag while hs400 tuningVeerabhadrarao Badiganti
Clear tuning_done flag while executing tuning to ensure vendor specific HS400 settings are applied properly when the controller is re-initialized in HS400 mode. Without this, re-initialization of the qcom SDHC in HS400 mode fails while resuming the driver from runtime-suspend or system-suspend. Fixes: ff06ce417828 ("mmc: sdhci-msm: Add HS400 platform support") Cc: stable@vger.kernel.org Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org> Link: https://lore.kernel.org/r/1590678838-18099-1-git-send-email-vbadigan@codeaurora.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-19 07:22:57 +0000