summaryrefslogtreecommitdiff
path: root/drivers/mmc
AgeCommit message (Collapse)Author
2011-05-24mmc: do not switch to 1-bit mode if not requiredOhad Ben-Cohen
6b5eda36 followed SDIO spec part E1 section 8, which states that in case SDIO interrupts are being used to wake up a suspended host, then it is required to switch to 1-bit mode before stopping the clock. Before switching to 1-bit mode (or back to 4-bit mode on resume), make sure that SDIO interrupts are really being used to wake the host. This is helpful for devices which have an external irq line (e.g. wl1271), and do not use SDIO interrupts to wake up the host. In this case, switching to 1-bit mode (and back to 4-bit mode on resume) is not necessary. Reported-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: mmc_card_keep_power cleanupsOhad Ben-Cohen
mmc_card_is_powered_resumed is a mouthful; instead, simply use mmc_card_keep_power, which also better explains the purpose of the macro. Employ mmc_card_keep_power() where possible. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: Reliable write support.Andrei Warkentin
Allows reliable writes to be used for MMC writes. Reliable writes are used to service write REQ_FUA/REQ_META requests. Handles both the legacy and the enhanced reliable write support in MMC cards. Signed-off-by: Andrei Warkentin <andreiw@motorola.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: sdhci: change CONFIG of MMC_SDHCI_TEGRA from 'tristate' to 'bool'Shawn Guo
This config option is used to decide whether tegra sdhci support should be build into the sdhci-platform module. So setting it 'm' is nonsense, since we can't build part of an module as a module. The effect for 'm' will probably be the same as for 'n'. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: tegra: add pm_flagsVenkat Rao
Enable fast bcm4329 WIFI suspend/resume on Tegra2 board. This patch allows the mach-tegra support to tell the tegra MMC host controller to NOT turn off power for the MMC controller the WIFI part lives behind. Thus bcm4329 firmware doesn't need to be reloaded. Signed-off-by: Venkat Rao <vrao@broadcom.com> Tested-by: Grant Grundler <grundler@chromium.org> Reviewed-by: Olof Johansson <olof@lixom.net> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: remove redundant irq disablingJohn Ogness
There is no need to disable irq's when using the sg_copy_*_buffer() functions because those functions do that already. There are also no races for the mm_queue struct here that would require the irq's to be disabled before calling sg_copy_*_buffer(). Signed-off-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: Ensure linux starts in eMMC user partitionPhilip Rakity
uBoot sometimes leaves eMMC pointing to the private boot partition. Ensure we always start looking at the user partition. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Bruce Clemens <bpclemens@marvell.com> Signed-off-by: Mark F. Brown <markb@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: Make struct pcmcia_device_id const, sound drivers edition staging: pcmcia: Convert pcmcia_device_id declarations to const pcmcia: Convert pcmcia_device_id declarations to const pcmcia: Make declaration and uses of struct pcmcia_device_id const pcmcia/sa1100: put sa11x0_pcmcia_hw_init[] to .devinit.data
2011-05-23Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (137 commits) ARM: bcmring: convert to use sp804 clockevents ARM: bcmring: convert to sp804 clocksource ARM: 6912/1: bcmring: Add clkdev table in init_early clockevents: ARM sp804: obtain sp804 timer rate via clks clockevents: ARM sp804: allow clockevent name to be specified clocksource: ARM sp804: obtain sp804 timer rate via clks clocksource: ARM sp804: allow clocksource name to be specified clocksource: convert OMAP1 to 32-bit down counting clocksource clocksource: convert MXS timrotv2 to 32-bit down counting clocksource clocksource: convert SPEAr platforms 16-bit up counting clocksource clocksource: convert Integrator/AP 16-bit down counting clocksource clocksource: convert W90x900 24-bit down counting clocksource clocksource: convert ARM 32-bit down counting clocksources clocksource: convert ARM 32-bit up counting clocksources clocksource: add common mmio clocksource ARM: update sa1100 to reflect PXA updates ARM: omap1: convert to using readl/writel instead of volatile struct ARM: omap1: delete useless interrupt handler ARM: s5p: consolidate selection of timer register ARM: 6939/1: fix missing 'cpu_relax()' declaration ...
2011-05-23Merge branches 'consolidate', 'ep93xx', 'fixes', 'misc', 'mmci', 'remove' ↵Russell King
and 'spear' into for-linus
2011-05-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) b43: fix comment typo reqest -> request Haavard Skinnemoen has left Atmel cris: typo in mach-fs Makefile Kconfig: fix copy/paste-ism for dell-wmi-aio driver doc: timers-howto: fix a typo ("unsgined") perf: Only include annotate.h once in tools/perf/util/ui/browsers/annotate.c md, raid5: Fix spelling error in comment ('Ofcourse' --> 'Of course'). treewide: fix a few typos in comments regulator: change debug statement be consistent with the style of the rest Revert "arm: mach-u300/gpio: Fix mem_region resource size miscalculations" audit: acquire creds selectively to reduce atomic op overhead rtlwifi: don't touch with treewide double semicolon removal treewide: cleanup continuations and remove logging message whitespace ath9k_hw: don't touch with treewide double semicolon removal include/linux/leds-regulator.h: fix syntax in example code tty: fix typo in descripton of tty_termios_encode_baud_rate xtensa: remove obsolete BKL kernel option from defconfig m68k: fix comment typo 'occcured' arch:Kconfig.locks Remove unused config option. treewide: remove extra semicolons ...
2011-05-18Haavard Skinnemoen has left AtmelJean Delvare
Haavard's e-mail address at Atmel is no longer valid. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Havard Skinnemoen <hskinnemoen@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-18drivercore: revert addition of of_match to struct deviceGrant Likely
Commit b826291c, "drivercore/dt: add a match table pointer to struct device" added an of_match pointer to struct device to cache the of_match_table entry discovered at driver match time. This was unsafe because matching is not an atomic operation with probing a driver. If two or more drivers are attempted to be matched to a driver at the same time, then the cached matching entry pointer could get overwritten. This patch reverts the of_match cache pointer and reworks all users to call of_match_device() directly instead. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-16Revert "mmc: fix a race between card-detect rescan and clock-gate work ↵Chris Ball
instances" This reverts commit 26fc8775b51484d8c0a671198639c6d5ae60533e, which has been reported to cause boot/resume-time crashes for some users: https://bbs.archlinux.org/viewtopic.php?id=118751. Signed-off-by: Chris Ball <cjb@laptop.org> Cc: <stable@kernel.org>
2011-05-12ARM: 6858/1: mmci: force negative edge on clock bypass for ux500Linus Walleij
This fixes a regression on high clock speeds with the MMCI on ux500. We need to make sure we derive the passthru clock on the falling edge of the incoming clock if it shall work at high frequencies, and on the ux500's there is a special bit for this. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-11ARM: 6785/1: mmci: separate out ST Micro register definesLinus Walleij
The mmci.h header contained a few registers not clearly marked as ST Micro only, rectify this and remove the HWFC magic in the process. The idea is to make the mmci.h header file more ordered so other vendors with PL180 derivates can see where to put in their custom register defines. Includes portions of an earlier patch from Sebastian Rasmussen. Acked-by: Sebastian Rasmussen <sebastian.rasmussen@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-06pcmcia: Convert pcmcia_device_id declarations to constJoe Perches
Saves about 50KB of data. Old/new size of all objects: text data bss dec hex filename 563015 80096 130684 773795 bcea3 (TOTALS) 610916 32256 130632 773804 bceac (TOTALS) Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be> (for drivers/net/can/softing/softing_cs.c) Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-04-27mmc: sdhci: Check mrq != NULL in sdhci_tasklet_finishChris Ball
It seems that under certain circumstances the sdhci_tasklet_finish() call can be entered with mrq set to NULL, causing the system to crash with a NULL pointer de-reference. Seen on S3C6410 system. Based on a patch by Dimitris Papastamos. Reported-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Cc: <stable@kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-04-27mmc: sdhci: Check mrq->cmd in sdhci_tasklet_finishBen Dooks
It seems that under certain circumstances that the sdhci_tasklet_finish() call can be entered with mrq->cmd set to NULL, causing the system to crash with a NULL pointer de-reference. Unable to handle kernel NULL pointer dereference at virtual address 00000000 PC is at sdhci_tasklet_finish+0x34/0xe8 LR is at sdhci_tasklet_finish+0x24/0xe8 Seen on S3C6410 system. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: <stable@kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-04-27mmc: tmio: fix .set_ios(MMC_POWER_UP) handlingGuennadi Liakhovetski
The aggressive clock gating for TMIO MMC patch has broken switching interface power on, using MFD or platform callbacks. Restore the ios->power_mode == MMC_POWER_UP && ios->clock == 0 case handling. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-04-27mmc: fix a race between card-detect rescan and clock-gate work instancesGuennadi Liakhovetski
Currently there is a race in the MMC core between a card-detect rescan work and the clock-gating work, scheduled from a command completion. Fix it by removing the dedicated clock-gating mutex and using the MMC standard locking mechanism instead. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Simon Horman <horms@verge.net.au> Cc: Magnus Damm <damm@opensource.se> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: <stable@kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-04-27mmc: omap: Fix possible NULL pointer derefMichael Buesch
Either OMAP_MMC_STAT_CARD_ERR or OMAP_MMC_STAT_END_OF_CMD might fire if there is no host->cmd pointer. Check for a valid host->cmd pointer before calling mmc_omap_cmd_done(). Signed-off-by: Michael Buesch <mb@bu3sch.de> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-04-27mmc: core: mmc_add_card(): fix missing break in switch statementMichał Mirosław
Fixes a cosmetic bug that affects printk() for SD-combo cards. Reported-by: Prashanth Bhat <prashanth.bhat@manipal.net> Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-04-27mmc: sdhci-pci: Fix error case in sdhci_pci_probe_slot()Chris Ball
If pci_ioremap_bar() fails during probe, we "goto release;" and free the host, but then we return 0 -- which tells sdhci_pci_probe() that the probe succeeded. Since we think the probe succeeded, when we unload sdhci we'll go to sdhci_pci_remove_slot() and it will try to dereference slot->host, which is now NULL because we freed it in the error path earlier. The patch simply sets ret appropriately, so that sdhci_pci_probe() will detect the failure immediately and bail out. Signed-off-by: Chris Ball <cjb@laptop.org> Cc: <stable@kernel.org>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-29Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (26 commits) mmc: SDHI should depend on SUPERH || ARCH_SHMOBILE mmc: tmio_mmc: Move some defines into a shared header mmc: tmio: support aggressive clock gating mmc: tmio: fix power-mode interpretation mmc: tmio: remove work-around for unmasked SDIO interrupts sh: fix SDHI IO address-range ARM: mach-shmobile: fix SDHI IO address-range mmc: tmio: only access registers above 0xff, if available mfd: remove now redundant sh_mobile_sdhi.h header sh: convert boards to use linux/mmc/sh_mobile_sdhi.h ARM: mach-shmobile: convert boards to use linux/mmc/sh_mobile_sdhi.h mmc: tmio: convert the SDHI MMC driver from MFD to a platform driver sh: ecovec: use the CONFIG_MMC_TMIO symbols instead of MFD mmc: tmio: split core functionality, DMA and MFD glue mmc: tmio: use PIO for short transfers mmc: tmio-mmc: Improve DMA stability on sh-mobile mmc: fix mmc_app_send_scr() for dma transfer mmc: sdhci-esdhc: enable esdhc on imx53 mmc: sdhci-esdhc: use writel/readl as general APIs mmc: sdhci: add the abort CMDTYPE bits definition ...
2011-03-29drivers: Final irq namespace conversionThomas Gleixner
Scripted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-28mmc: SDHI should depend on SUPERH || ARCH_SHMOBILEGuennadi Liakhovetski
Fix build breakage on platforms, not providing readsw and writesw functions, e.g., on x86(_64). Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-26mmc: tmio_mmc: Move some defines into a shared headerSimon Horman
Also add TMIO_BBS. This allows these defines to also be used by zboot. Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-25mmc: tmio: support aggressive clock gatingGuennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-25mmc: tmio: fix power-mode interpretationGuennadi Liakhovetski
The power-mode sequence on MMC is MMC_POWER_OFF -> MMC_POWER_UP -> MMC_POWER_ON and not MMC_POWER_ON -> MMC_POWER_UP, as the driver currently is implying. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-25mmc: tmio: remove work-around for unmasked SDIO interruptsGuennadi Liakhovetski
SDIO IRQs got unmasked on sh-mobile while writing to the CTL_CLK_AND_WAIT_CTL register, because that register at address 0x138 is not implemented on those SoCs and writes to it overwrite the register at address 0x38: CTL_SDIO_IRQ_MASK. Previous patches eliminated access to register above 0xff on sh-mobile, so that this work-around isn't needed anymore. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-25mmc: tmio: only access registers above 0xff, if availableGuennadi Liakhovetski
Not all tmio implementations have registers above oxff. Accessing them on thise platforms is dangerous. In some cases it leads to address wrapping to addresses below 0x100, which corrupts random unrelated registers. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-25mmc: tmio: convert the SDHI MMC driver from MFD to a platform driverGuennadi Liakhovetski
On sh-mobile platforms the SDHI driver was using the tmio_mmc SD/SDIO MFD cell driver. Now that the tmio_mmc driver has been split into a core and a separate MFD glue, we can support SDHI natively without the need to emulate an MFD controller. This also allows to support systems with an on-SoC SDHI controller and a separate MFD with a TMIO core. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-25mmc: tmio: split core functionality, DMA and MFD glueGuennadi Liakhovetski
TMIO MMC chips contain an SD / SDIO IP core from Panasonic, similar to the one, used in MN5774 and other MN57xx controllers. These IP cores are included in many multifunction devices, in sh-mobile chips from Renesas, in the latter case they can also use DMA. Some sh-mobile implementations also have some other specialities, that MFD-based solutions don't have. This makes supporting all these features in a monolithic driver inconveniet and error-prone. This patch splits the driver into 3 parts: the core, the MFD glue and the DMA support. In case of a modular build, two modules will be built: mmc_tmio_core and mmc_tmio. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-25mmc: tmio: use PIO for short transfersGuennadi Liakhovetski
This patch allows transferring of some requests in PIO and some in DMA mode and defaults to using DMA only for transfers longer than 8 bytes. This is especially useful with SDIO, which can have lots of 2- and 4-byte transfers, creating unnecessary high overhead, when executed in DMA. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-25mmc: tmio-mmc: Improve DMA stability on sh-mobileGuennadi Liakhovetski
On some SDHI tmio implementations the order of DMA and command completion interrupts swaps, which leads to malfunction. This patch postpones DMA activation until the MMC command completion IRQ time. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-25mmc: fix mmc_app_send_scr() for dma transferYoshihiro Shimoda
This patch is based on the commit "af51715079e7fb6b290e1881d63d815dc4de5011": * Bugfix to that mmc_send_cxd_data() code: dma-to-stack is unsafe/nonportable, so kmalloc a bounce buffer instead. The driver may invalidate the mmc_card->csd when host driver uses dma. So this subroutine also needs a kmalloc buffer. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-25mmc: sdhci-esdhc: enable esdhc on imx53Richard Zhu
Fix the NO INT in the Multi-BLK IO in SD/MMC, and Multi-BLK read in SDIO on imx53. The CMDTYPE of the CMD register (offset 0xE) should be set to "11" when the STOP CMD12 is issued on imx53 to abort one open ended multi-blk IO. Otherwise the TC INT wouldn't be generated. In exact block transfer, the controller doesn't complete the operations automatically as required at the end of the transfer and remains on hold if the abort command is not sent on imx53. As a result, the TC flag is not asserted and SW receives timeout exception. Set bit1 of Vendor Spec register to fix it. Signed-off-by: Richard Zhu <Hong-Xing.Zhu@freescale.com> Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-25mmc: sdhci-esdhc: use writel/readl as general APIsRichard Zhu
Add one flag to indicate the GPIO CD/WP is enabled or not on imx platforms, and reuse the writel/readl as the general APIs for imx SOCs. Signed-off-by: Richard Zhu <Hong-Xing.Zhu@freescale.com> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-25mmc: sdhci: add the abort CMDTYPE bits definitionRichard Zhu
Add the abort CMDTYPE bits definition of command register (offset 0xE) Signed-off-by: Richard Zhu <Hong-Xing.Zhu@freescale.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-25mmc: sdhci-esdhc: remove SDHCI_QUIRK_NO_CARD_NO_RESET from esdhcRichard Zhu
sdhci-esdhc-imx does not need SDHCI_QUIRK_NO_CARD_NO_RESET. Make it OF-specific. Signed-off-by: Richard Zhu <Hong-Xing.Zhu@freescale.com> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-25mmc: of_mmc_spi: Need to include irq.h and of_irq.hDavid Miller
Since these are the headers that provide irq_of_parse_and_map() and NO_IRQ. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-25mmc: mmci: Add ARM variant with extended FIFOPawel Moll
New IO FPGA implementation for Versatile Express boards contain MMCI (PL180) cell with FIFO extended to 128 words (512 bytes). Matt Waddel reports that this patch improves MMC performance on his vexpress system, and also fixes "mmcblk0: error -5 transferring data" errors. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Tested-by: Matt Waddel <matt.waddel@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-25mmc: dw_mmc: set fixed burst in BMOD registerJaehoon Chung
This patch uses the fixed burst bit when using an internal DMA controller. I found increased performance with IDMAC when this bit is set. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-25mmc: use pci_dev->revisionSergei Shtylyov
The SDHCI driver uses PCI_CLASS_REVISION instead of PCI_REVISION_ID, so it was not converted by commit 44c10138fd4bbc4b6d6bff0873c24902f2a9da65 (PCI: Change all drivers to use pci_device->revision). The newer VIA driver has similar code too. This patch converts both drivers to use the 'revision' field of 'struct pci_dev'. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-25mmc: mmc_test: Remove set-but-unused variable.Chris Ball
Fixes: drivers/mmc/card/mmc_test.c: In function ‘mmc_test_seq_perf’: drivers/mmc/card/mmc_test.c:1878:28: warning: variable ‘ts’ set but not used [-Wunused-but-set-variable] There's no reason to be calling timespec_sub() here, because mmc_test_print_avg_rate() is going to do that itself. Signed-off-by: Chris Ball <cjb@laptop.org> Cc: Adrian Hunter <adrian.hunter@nokia.com>
2011-03-24Merge branch 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-block: (65 commits) Documentation/iostats.txt: bit-size reference etc. cfq-iosched: removing unnecessary think time checking cfq-iosched: Don't clear queue stats when preempt. blk-throttle: Reset group slice when limits are changed blk-cgroup: Only give unaccounted_time under debug cfq-iosched: Don't set active queue in preempt block: fix non-atomic access to genhd inflight structures block: attempt to merge with existing requests on plug flush block: NULL dereference on error path in __blkdev_get() cfq-iosched: Don't update group weights when on service tree fs: assign sb->s_bdi to default_backing_dev_info if the bdi is going away block: Require subsystems to explicitly allocate bio_set integrity mempool jbd2: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging jbd: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging fs: make fsync_buffers_list() plug mm: make generic_writepages() use plugging blk-cgroup: Add unaccounted time to timeslice_used. block: fixup plugging stubs for !CONFIG_BLOCK block: remove obsolete comments for blkdev_issue_zeroout. blktrace: Use rq->cmd_flags directly in blk_add_trace_rq. ... Fix up conflicts in fs/{aio.c,super.c}
2011-03-23tmio: Silence warnings introduced by mfd changesAndres Salomon
This silences warnings such as drivers/video/tmiofb.c: In function 'tmiofb_hw_init': drivers/video/tmiofb.c:270: warning: initialization discards qualifiers from pointer target type These were added by me in commit 2a79bb1d. Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mmc: Use mfd_data instead of driver_data for tmio-mmcAndres Salomon
Use mfd_data for passing information from mfd drivers to mfd clients. The mfd_cell's driver_data field is being phased out. Clients that were using driver_data now access .mfd_data via mfd_get_data(). This changes tmio-mmc only; mfd drivers with other cells are not modified. Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit (git 2.34.1) at 2025-09-12 21:26:48 +0000