summaryrefslogtreecommitdiff
path: root/drivers/mtd
AgeCommit message (Collapse)Author
2014-03-10mtd: sm_ftl: heap corruption in sm_create_sysfs_attributes()Dan Carpenter
We always put a NUL terminator one space past the end of the "vendor" buffer. Walter Harms also pointed out that this should just use kstrndup(). Fixes: 7d17c02a01a1 ('mtd: Add new SmartMedia/xD FTL') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-03-10mtd: m25p80: Enable Dual SPI read transfers for s25fl256s1 and s25fl512sGeert Uytterhoeven
Spansion s25fl256s1 and s25fl512s support Dual SPI transfers, hence set the M25P80_DUAL_READ flag. Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-03-10mtd: m25p80: Add dual read supportGeert Uytterhoeven
Add support for Dual SPI read transfers, which is supported by some Spansion SPI FLASHes. Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-03-05UBI: rename block device ioctlsArtem Bityutskiy
Rename the UBI_IOCVOLATTBLK and UBI_IOCVOLDETBLK to UBI_IOCVOLCRBLK and UBI_IOCVOLRMBLK, because we do not use terms "attach" and "detach" for the R/O block devices on top of UBI volumes. Instead, we use terms "create" and "remove". This patch also amends the related commentaries. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
2014-03-05UBI: block: Use ENOSYS as return value when CONFIG_UBIBLOCK=nEzequiel Garcia
In order to have a way of distinguishing an invalid ioctl from a not supported (but otherwise valid) ioctl, this commit changes the return value of the ioctl stubs from ENOTTY to ENOSYS. This will be useful to report more accurate error messages from userspace tools. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2014-03-04UBI: block: Add CONFIG_BLOCK dependencyEzequiel Garcia
The UBI block driver depends on the block infrastructure. Add the proper dependency and fix a build error when CONFIG_BLOCK is not selected. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2014-03-04UBI: block: Use 'u64' for the 64-bit dividendEzequiel Garcia
Fixes the following warning on ARCH=avr32: drivers/mtd/ubi/block.c: In function 'ubiblock_read': drivers/mtd/ubi/block.c:207: warning: comparison of distinct pointer types lacks a cast Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2014-03-04UBI: block: Mark init-only symbol as __initdataEzequiel Garcia
ubiblock_param_ops should be marked as __init as it's only used to set a driver parameter on insertion time. This commit fixes the following: WARNING: drivers/mtd/built-in.o(.text+0x653ac): Section mismatch in reference from the variable ubiblock_param_ops to the function .init.text:ubiblock_set_param() The function ubiblock_param_ops() references the function __init ubiblock_set_param(). This is often because ubiblock_param_ops lacks a __init annotation or the annotation of ubiblock_set_param is wrong. Given gcc errors if the struct is marked const __initdata, this commit drops the const mark from it. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2014-03-04UBI: block: do not use term "attach"Artem Bityutskiy
We already use term attach/detach for UBI->MTD relations, let's not use this for UBI->ubiblock relations to avoid confusion. Just use 'create' and 'remove' instead. E.g., "create a R/O block device on top of a UBI volume". Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2014-03-02Merge 3.14-rc5 into char-misc-nextGreg Kroah-Hartman
We want these fixes in here as well.
2014-02-28powerpc: select MEMORY for FSL_IFC to not break existing .config filesPaul Gortmaker
commit d2ae2e20fbdde5a65f3a5a153044ab1e5c53f7cc ("driver/memory:Move Freescale IFC driver to a common driver") introduces this build regression into the mpc85xx_defconfig: drivers/built-in.o: In function `fsl_ifc_nand_remove': drivers/mtd/nand/fsl_ifc_nand.c:1147: undefined reference to `fsl_ifc_ctrl_dev' drivers/mtd/nand/fsl_ifc_nand.c:1147: undefined reference to `fsl_ifc_ctrl_dev' drivers/built-in.o: In function `fsl_ifc_nand_probe': drivers/mtd/nand/fsl_ifc_nand.c:1031: undefined reference to `fsl_ifc_ctrl_dev' drivers/mtd/nand/fsl_ifc_nand.c:1031: undefined reference to `fsl_ifc_ctrl_dev' drivers/built-in.o: In function `match_bank': drivers/mtd/nand/fsl_ifc_nand.c:1013: undefined reference to `convert_ifc_address' drivers/built-in.o: In function `fsl_ifc_nand_probe': drivers/mtd/nand/fsl_ifc_nand.c:1059: undefined reference to `fsl_ifc_ctrl_dev' drivers/mtd/nand/fsl_ifc_nand.c:1080: undefined reference to `fsl_ifc_ctrl_dev' drivers/mtd/nand/fsl_ifc_nand.c:1069: undefined reference to `fsl_ifc_ctrl_dev' drivers/mtd/nand/fsl_ifc_nand.c:1069: undefined reference to `fsl_ifc_ctrl_dev' make: *** [vmlinux] Error 1 This happens because there is nothing to descend us into the drivers/memory directory in the mpc85xx_defconfig. It wasn't selecting CONFIG_MEMORY. So we never built drivers/memory/fsl_ifc.o and so we have nothing to link the above symbols against. Since the goal of the original commit was to relocate the driver to an arch independent location, it only makes sense to relocate the Kconfig setting there as well. But that alone won't fix the build failure; for that we ensure whoever selects FSL_IFC also selects MEMORY. Cc: Prabhakar Kushwaha <prabhakar@freescale.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-28UBI: R/O block driver on top of UBI volumesEzequiel Garcia
This commit introduces read-only block device emulation on top of UBI volumes. Given UBI takes care of wear leveling and bad block management it's possible to add a thin layer to enable block device access to UBI volumes. This allows to use a block-oriented filesystem on a flash device. The UBI block devices are meant to be used in conjunction with any regular, block-oriented file system (e.g. ext4), although it's primarily targeted at read-only file systems, such as squashfs. Block devices are created upon user request through new ioctls: UBI_IOCVOLATTBLK to attach and UBI_IOCVOLDETBLK to detach. Also, a new UBI module parameter is added 'ubi.block'. This parameter is needed in order to attach a block device on boot-up time, allowing to mount the rootfs on a ubiblock device. For instance, you could have these kernel parameters: ubi.mtd=5 ubi.block=0,0 root=/dev/ubiblock0_0 Or, if you compile ubi as a module: $ modprobe ubi mtd=/dev/mtd5 block=/dev/ubi0_0 Artem: amend commentaries and massage the patch a little bit. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2014-02-27Merge tag 'upstream-3.14-rc5' of git://git.infradead.org/linux-ubifsLinus Torvalds
Pull ubifs fix from Artem Bityutskiy: "Just a single fix for the UBI module unload path which makes sure we do not touch freed memory" * tag 'upstream-3.14-rc5' of git://git.infradead.org/linux-ubifs: UBI: fix some use after free bugs
2014-02-23mtd: nand: omap: fix ecclayout->oobfree->lengthPekon Gupta
This patch excludes reserved-marker byte-position from oobfree->length calculation. Thus all bytes from oobfree->offset till end of OOB are free. CC: <stable@vger.kernel.org> # 3.13.x+ Signed-off-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-02-23mtd: nand: omap: fix ecclayout->oobfree->offsetPekon Gupta
1) In current implementation, ecclayout->oobfree->offset is calculated with respect to ecclayout->eccpos[0] which is incorrect because ECC bytes may not be stored contiguously in OOB. So, this patch calculates ecclayout->oobfree->offset with respect to last ECC byte-position 'eccpos[ecclayout->eccbytes-1]'. 2) ECC layout of some ecc-schemes expects reserved-markers at specific eccpos[] which should not be over-written by any file-system metadata. So this patch aligns oobfree->offset taking into account of such markers. CC: <stable@vger.kernel.org> # 3.13.x+ Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com> Tested-by: Stefan Roese <sr@denx.de> Signed-off-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-02-23mtd: nand: omap: fix ecclayout to be in sync with u-boot NAND driverPekon Gupta
Fixes: commit a919e51161b58ed7e6e663daba99ab7d558808f3 mtd: nand: omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe Fixes ecclayout mismatch introduced in above commit for following ecc-schemes: - OMAP_ECC_BCH4_CODE_HW_DETECTION_SW - OMAP_ECC_BCH8_CODE_HW_DETECTION_SW However, this patch also touches other ecc-schemes as the fix required refactoring common code, into ecc-scheme specific code. This patch aligns ecc-layout for below ecc-schemes as per reference [1],[2],[3] +---+------------+-------------++-------------+-------------+ |OOB|BCH8_CODE_HW|BCH8_CODE_HW_||HAM1_CODE_HW |HAM1_CODE_HW | |pos| | DETECTION_SW||(x8 device) |(x16 device) | +---+------------+-------------++-------------+-------------+ | 0 |BADBLK_MARK | BADBLK_MARK || BADBLK_MARK | BADBLK_MARK | | 1 |BADBLK_MARK | BADBLK_MARK || eccpos[0] | BADBLK_MARK | | 2 | eccpos[0] | eccpos[0] || eccpos[1] | eccpos[0] | | 3 | eccpos[1] | eccpos[1] || eccpos[2] | eccpos[1] | | 4 | eccpos[2] | eccpos[2] || eccpos[3] | eccpos[2] | | 5 | eccpos[3] | eccpos[3] || eccpos[4] | eccpos[3] | | 6 | eccpos[4] | eccpos[4] || eccpos[5] | eccpos[4] | | 7 | eccpos[5] | eccpos[5] || eccpos[6] | eccpos[5] | | 8 | eccpos[6] | eccpos[6] || eccpos[7] | eccpos[6] | | 9 | eccpos[7] | eccpos[7] || eccpos[8] | eccpos[7] | |10 | eccpos[8] | eccpos[8] || eccpos[9] | eccpos[8] | |11 | eccpos[9] | eccpos[9] || eccpos[10] | eccpos[9] | |12 | eccpos[10] | eccpos[10] || eccpos[11] | eccpos[10] | |13 | eccpos[11] | eccpos[11] || oobfree[0] | eccpos[11] | |14 | eccpos[12] | eccpos[12] || oobfree[1] | oobfree[0] | |15 | eccpos[13] | <reserved> || oobfree[2] | oobfree[1] | +---+------------+-------------++-------------+-------------+ |16 | eccpos[14] | eccpos[13] || oobfree[3] | oobfree[2] | |...| [...] | [...] || [...] | [...] | |56 | eccpos[54] | eccpos[51] || oobfree[43] | oobfree[42] | |57 | eccpos[55] | <reserved> || oobfree[44] | oobfree[43] | +===+============+=============+==============+=============+ |58 | oobfree[0] | oobfree[0] || oobfree[45] | oobfree[44] | |59 | oobfree[1] | oobfree[1] || oobfree[46] | oobfree[45] | |60 | oobfree[2] | oobfree[2] || oobfree[47] | oobfree[46] | |61 | oobfree[3] | oobfree[3] || oobfree[48] | oobfree[47] | |62 | oobfree[4] | oobfree[4] || oobfree[49] | oobfree[48] | |63 | oobfree[5] | oobfree[5] || oobfree[50] | oobfree[49] | +---+------------+-------------+--------------+-------------+ [1] ecc-layout expected by ROM code, as specified in SoC TRM under: Chapter="Initialization" Section="Device Initialization by ROM code" Sub-Section="Memory Booting" Heading="NAND" Figure="ECC Locations in NAND Spare Areas" [2] ecc-layout updates in u-boot http://lists.denx.de/pipermail/u-boot/2013-November/167551.html [3] u-boot configurations to match above ecc-layout are documented at https://processors.wiki.ti.com/index.php/Linux_Core_NAND_User%27s_Guide CC: <stable@vger.kernel.org> # 3.13.x+ Reported-by: Enric Balletbo Serra <eballetbo@iseebcn.com> Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com> Tested-by: Stefan Roese <sr@denx.de> Signed-off-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-02-23ARM: davinci: aemif: get rid of davinci-nand driver dependency on aemifIvan Khoronzhuk
The problem that the set timings code contains the call of Davinci platform function davinci_aemif_setup_timing() which is not accessible if kernel is built for another platform like Keystone. The Keysone platform is going to use TI AEMIF driver. If TI AEMIF is used we don't need to set timings and bus width. It is done by AEMIF driver. To get rid of davinci-nand driver dependency on aemif platform code we moved aemif code to davinci platform. The platform AEMIF code (aemif.c) has to be removed once Davinci will be converted to DT and use ti-aemif.c driver. Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> [nsekhar@ti.com: fixed checkpatch error and a build breakage due to missing include, rebased onto l2-mtd/master] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2014-02-18driver/memory:Move Freescale IFC driver to a common driverPrabhakar Kushwaha
Freescale IFC controller has been used for mpc8xxx. It will be used for ARM-based SoC as well. This patch moves the driver to driver/memory and fix the header file includes. Also remove module_platform_driver() and instead call platform_driver_register() from subsys_initcall() to make sure this module has been loaded before MTD partition parsing starts. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-14mtd: nand: fix off-by-one read retry mode countingBrian Norris
A flash may support N read retry voltage threshold modes, numbered 0 through N-1 (where mode 0 represents the initial state). However, nand_do_read_ops() tries to use mode 0 through N. This off-by-one error shows up, for instance, when using nanddump, and we have cycled through available modes: nand: setting READ RETRY mode 0 nand: setting READ RETRY mode 1 nand: setting READ RETRY mode 2 nand: setting READ RETRY mode 3 nand: setting READ RETRY mode 4 nand: setting READ RETRY mode 5 nand: setting READ RETRY mode 6 nand: setting READ RETRY mode 7 nand: setting READ RETRY mode 8 libmtd: error!: cannot read 8192 bytes from mtd0 (eraseblock 20, offset 0) error 22 (Invalid argument) nanddump: error!: mtd_read Tested on Micron MT29F64G08CBCBBH1, with 8 retry modes. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Huang Shijie <b32955@freescale.com>
2014-02-11PM / QoS: Rename device resume latency QoS itemsRafael J. Wysocki
Rename symbols, variables, functions and structure fields related do the resume latency device PM QoS type so that it is clear where they belong (in particular, to avoid confusion with the latency tolerance device PM QoS type introduced by a subsequent changeset). Update the PM QoS documentation to better reflect its current state. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-04UBI: fix some use after free bugsDan Carpenter
Move the kmem_cache_free() calls down a couple lines. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2014-01-30Merge tag 'upstream-3.14-rc1' of git://git.infradead.org/linux-ubifsLinus Torvalds
Pull ubifs updates from Artem Bityutskiy: - Improve the NOR erasure quirk - now it tries to do as little writes as possible, because the eraseblock may be in an "unstable" state and write operation sometimes causes NOR chip lock-ups. - Both UBI and UBIFS changes are now maintainer in one single tree, because the amount of changes dropped significantly. * tag 'upstream-3.14-rc1' of git://git.infradead.org/linux-ubifs: UBI: avoid program operation on NOR flash after erasure interrupted MAINTAINERS: keep UBI and UBIFS stuff in the same tree UBI: fix error return code
2014-01-30Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull more powerpc bits from Ben Herrenschmidt: "Here are a few more powerpc bits for this merge window. The bulk is made of two pull requests from Scott and Anatolij that I had missed previously (they arrived while I was away). Since both their branches are in -next independently, and the content has been around for a little while, they can still go in. The rest is mostly bug and regression fixes, a small series of cleanups to our pseries cpuidle code (including moving it to the right place), and one new cpuidle bakend for the powernv platform. I also wired up the new sched_attr syscalls" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (37 commits) powerpc: Wire up sched_setattr and sched_getattr syscalls powerpc/hugetlb: Replace __get_cpu_var with get_cpu_var powerpc: Make sure "cache" directory is removed when offlining cpu powerpc/mm: Fix mmap errno when MAP_FIXED is set and mapping exceeds the allowed address space powerpc/powernv/cpuidle: Back-end cpuidle driver for powernv platform. powerpc/pseries/cpuidle: smt-snooze-delay cleanup. powerpc/pseries/cpuidle: Remove MAX_IDLE_STATE macro. powerpc/pseries/cpuidle: Make cpuidle-pseries backend driver a non-module. powerpc/pseries/cpuidle: Use cpuidle_register() for initialisation. powerpc/pseries/cpuidle: Move processor_idle.c to drivers/cpuidle. powerpc: Fix 32-bit frames for signals delivered when transactional powerpc/iommu: Fix initialisation of DART iommu table powerpc/numa: Fix decimal permissions powerpc/mm: Fix compile error of pgtable-ppc64.h powerpc: Fix hw breakpoints on !HAVE_HW_BREAKPOINT configurations clk: corenet: Adds the clock binding powerpc/booke64: Guard e6500 tlb handler with CONFIG_PPC_FSL_BOOK3E powerpc/512x: dts: add MPC5125 clock specs powerpc/512x: clk: support MPC5121/5123/5125 SoC variants powerpc/512x: clk: enforce even SDHC divider values ...
2014-01-29Merge remote-tracking branch 'agust/next' into nextBenjamin Herrenschmidt
<< Switch mpc512x to the common clock framework and adapt mpc512x drivers to use the new clock driver. Old PPC_CLOCK code is removed entirely since there are no users any more. >>
2014-01-28Merge tag 'for-linus-20140127' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD updates from Brian Norris: - Add me (Brian Norris) as an additional MTD maintainer (it'd be nice to get David's "ack" for this; I'm sure he approves, but he's been pretty silent lately) - Add Ezequiel Garcie as maintainer for the pxa3xx NAND driver - Last (?) round of pxa3xx improvements for supporting Armada 370/XP - Typical churn in driver boilerplate (OOM messages, printk()'s, devm_*, etc.) - Quad read mode support for SPI NOR driver (m25p80) - Update Davinci NAND driver to prepare for use on new platforms - Begin to kill off NAND_MAX_{PAGE,OOB}SIZE macros; more work is pending - Miscellaneous NAND device support (new IDs) - Add READ RETRY support for Micron MLC NAND - Support new GPMI NAND ECC layout device-tree binding - Avoid mapping stack/vmalloc() memory for GPMI NAND DMA * tag 'for-linus-20140127' of git://git.infradead.org/linux-mtd: (151 commits) mtd: gpmi: add sanity check when mapping DMA for read_buf/write_buf mtd: gpmi: allocate a proper buffer for non ECC read/write mtd: m25p80: Set rx_nbits for Quad SPI transfers mtd: m25p80: Enable Quad SPI read transfers for s25fl512s mtd: s3c2410: Merge plat/regs-nand.h into s3c2410.c mtd: mtdram: add missing 'const' mtd: m25p80: assign default read command mtd: nuc900_nand: remove redundant return value check of platform_get_resource() mtd: plat_nand: remove redundant return value check of platform_get_resource() mtd: nand: add Intel manufacturer ID mtd: nand: add SanDisk manufacturer ID mtd: nand: add support for Samsung K9LCG08U0B mtd: nand: pxa3xx: Add support for 2048 bytes page size devices mtd: m25p80: Use OPCODE_QUAD_READ_4B for 4-byte addressing mtd: nand: don't use {read,write}_buf for 8-bit transfers mtd: nand: use __packed shorthand mtd: nand: support Micron READ RETRY mtd: nand: add generic READ RETRY support mtd: nand: add ONFI vendor block for Micron mtd: nand: localize ECC failures per page ...
2014-01-27mtd: gpmi: add sanity check when mapping DMA for read_buf/write_bufHuang Shijie
The buffer pointer passed from the upper layer may points to a buffer in the stack or a buffer allocated by vmalloc, and etc.. This patch adds more sanity check to this buffer. After this patch, if we meet a buffer which is allocated by vmalloc or a buffer in the stack, we will use our own DMA buffer @data_buffer_dma to do the DMA operations. If the buffer is not the cases above, we will map it for DMA operations directly. Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-27mtd: gpmi: allocate a proper buffer for non ECC read/writeHuang Shijie
The @data_buffer_dma buffer is used for non ECC read/write. Currently, the length of the buffer is PAGE_SIZE, but the NAND chip may has 8K page or 16K page. So we have to extend it for the large page NAND chips. The gpmi_alloc_dma_buffer will be called twice. The first time is to allocate a temporary buffer for scanning the NAND chip; The second time is to allocate a buffer to store the real page content. This patch allocates a buffer of PAGE_SIZE size for scanning the NAND chip when gpmi_alloc_dma_buffer is called the first time, and allocates a buffer of the real NAND page size for the second time gpmi_alloc_dma_buffer is called. Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-27mtd: m25p80: Set rx_nbits for Quad SPI transfersGeert Uytterhoeven
When using the Quad Read opcode, SPI masters still use Single SPI transfers, as spi_transfer.rx_nbits defaults to SPI_NBITS_SINGLE. Use SPI_NBITS_QUAD to fix this. While an earlier version of commit 3487a63955c34ea508bcf4ca5131ddd953876e2d ("drivers: mtd: m25p80: add quad read support") did this correctly, it was forgotten in the version that got merged. Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-27mtd: m25p80: Enable Quad SPI read transfers for s25fl512sGeert Uytterhoeven
Spansion s25fl512s supports Quad SPI transfers, hence set the M25P80_QUAD_READ flag. Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "Usual rocket science stuff from trivial.git" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) neighbour.h: fix comment sched: Fix warning on make htmldocs caused by wait.h slab: struct kmem_cache is protected by slab_mutex doc: Fix typo in USB Gadget Documentation of/Kconfig: Spelling s/one/once/ mkregtable: Fix sscanf handling lp5523, lp8501: comment improvements thermal: rcar: comment spelling treewide: fix comments and printk msgs IXP4xx: remove '1 &&' from a condition check in ixp4xx_restart() Documentation: update /proc/uptime field description Documentation: Fix size parameter for snprintf arm: fix comment header and macro name asm-generic: uaccess: Spelling s/a ny/any/ mtd: onenand: fix comment header doc: driver-model/platform.txt: fix a typo drivers: fix typo in DEVTMPFS_MOUNT Kconfig help text doc: Fix typo (acces_process_vm -> access_process_vm) treewide: Fix typos in printk drivers/gpu/drm/qxl/Kconfig: reformat the help text ...
2014-01-22mtd: s3c2410: Merge plat/regs-nand.h into s3c2410.cSachin Kamat
plat/regs-nand.h is used only by S3C2410 nand driver. Since there are no other users, merge this file into the driver code to remove platform dependency. While at it also remove unused macros. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-20mtd: mtdram: add missing 'const'Brian Norris
mtdram_init_device() wasn't updated along with mtd_partition.name. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org>
2014-01-20mtd: m25p80: assign default read commandBrian Norris
In the following commit (in -next): commit 8552b439aba7f32063755d23f79ca27b4d0a3115 drivers: mtd: m25p80: convert "bool" read check into an enum We converted the boolean 'fast_read' property to become an enum 'flash_read', but at the same time, we changed the conditional path so that it doesn't choose a default value in some cases (technically, we choose the correct default simply by virtue of devm_kzalloc(), which zeroes this out to be a NORMAL read operation, but still...). Fix this by setting a default for the 'else' clause. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Sourav Poddar <sourav.poddar@ti.com> Acked-by: Marek Vasut <marex@denx.de>
2014-01-20mtd: nuc900_nand: remove redundant return value check of platform_get_resource()Wei Yongjun
Remove unneeded error handling on the result of a call to platform_get_resource() when the value is passed to devm_ioremap_resource(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-20mtd: plat_nand: remove redundant return value check of platform_get_resource()Wei Yongjun
Remove unneeded error handling on the result of a call to platform_get_resource() when the value is passed to devm_ioremap_resource(). And move those two call together to make the connection between them more clear. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-20mtd: nand: add Intel manufacturer IDHuang Shijie
Add the Intel manufacturer Id. Tested with Intel JS29F32G08ACMD1(4096 + 224) which is ONFI 2.0 compliant nand. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-20mtd: nand: add SanDisk manufacturer IDHuang Shijie
Add the manufactor ID for SanDisk. Make preparation for SanDisk SDTNRGAMA-008G. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-20mtd: nand: add support for Samsung K9LCG08U0BHuang Shijie
Assume that: tmp = ((extid >> 2) & 0x04) | (extid & 0x03)); From the K9LCG08U0B's datasheet, we know that: the oob size is 640 when tmp is 6; the oob size is 1024 when tmp is 7; Signed-off-by: Huang Shijie <b32955@freescale.com> [Brian: fixed compile issue] Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-20mtd: nand: pxa3xx: Add support for 2048 bytes page size devicesRodolfo Giometti
This commit adds support for devices with 2048B page sizes and 4-bit ECC strength requirements. This is achieved by enabling the BCH ECC engine, which provides a higher strength: 16-bit over 2048 bytes. Additionally, add a proper ECC layout to model the controller's view of the device (where 'U' means unused and 'B' is the bad block marker): ---------------------------------------------------- | 2048B data | B | B | 30B spare | 30B ECC | U | U | ---------------------------------------------------- Signed-off-by: Rodolfo Giometti <giometti@linux.it> [Brian: updated with Ezequiel's patch description] Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-16mtd: m25p80: Use OPCODE_QUAD_READ_4B for 4-byte addressingGeert Uytterhoeven
commit 3487a63955c34ea508bcf4ca5131ddd953876e2d ("drivers: mtd: m25p80: add quad read support") in -next added both the 3-byte OPCODE_QUAD_READ and the 4-byte OPCODE_QUAD_READ_4B, but incorrectly uses OPCODE_QUAD_READ for both 3-byte and 4-byte addressing. Use OPCODE_QUAD_READ_4B in the 4-byte case to fix this. Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-14mtd: nand: don't use {read,write}_buf for 8-bit transfersUwe Kleine-König
According to the Open NAND Flash Interface Specification (ONFI) Revision 3.1 "Parameters are always transferred on the lower 8-bits of the data bus." for the Get Features and Set Features commands. So using read_buf and write_buf is wrong for 16-bit wide nand chips as they use I/O[15:0]. The Get Features command is easily fixed using 4 times the read_byte callback. For Set Features implement a new overwritable callback "write_byte". Still I expect the default to work just fine for all controllers and making it overwriteable was just done for symmetry. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [Brian: fixed warning] Tested-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-13mtd: nand: support Micron READ RETRYBrian Norris
Micron provides READ RETRY support via the ONFI vendor-specific parameter block (to indicate how many read-retry modes are available) and the ONFI {GET,SET}_FEATURES commands with a vendor-specific feature address (to support reading/switching the current read-retry mode). The recommended sequence is as follows: 1. Perform PAGE_READ operation 2. If no ECC error, we are done 3. Run SET_FEATURES with feature address 89h, mode 1 4. Retry PAGE_READ operation 5. If ECC error and there are remaining supported modes, increment the mode and return to step 3. Otherwise, this is a true ECC error. 6. Run SET_FEATURES with feature address 89h, mode 0, to return to the default state. This patch implements the chip->setup_read_retry() callback for Micron and fills in the chip->read_retries. Tested on Micron MT29F32G08CBADA, which supports 8 read-retry modes. The Micron vendor-specific table was checked against the datasheets for the following Micron NAND: Needs retry Cell-type Part number Vendor revision Byte 180 ----------- --------- ---------------- --------------- ------------ No SLC MT29F16G08ABABA 1 Reserved (0) No MLC MT29F32G08CBABA 1 Reserved (0) No SLC MT29F1G08AACWP 1 0 Yes MLC MT29F32G08CBADA 1 08h Yes MLC MT29F64G08CBABA 2 08h Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Huang Shijie <b32955@freescale.com>
2014-01-13mtd: nand: add generic READ RETRY supportBrian Norris
Modern MLC (and even SLC?) NAND can experience a large number of bitflips (beyond the recommended correctability capacity) due to drifts in the voltage threshold (Vt). These bitflips can cause ECC errors to occur well within the expected lifetime of the flash. To account for this, some manufacturers provide a mechanism for shifting the Vt threshold after a corrupted read. The generic pattern seems to be that a particular flash has N read retry modes (where N = 0, traditionally), and after an ECC failure, the host should reconfigure the flash to use the next available mode, then retry the read operation. This process repeats until all bitfips can be corrected or until the host has tried all available retry modes. This patch adds the infrastructure support for a vendor-specific/flash-specific callback, used for setting the read-retry mode (i.e., voltage threshold). For now, this patch always returns the flash to mode 0 (the default mode) after a successful read-retry, according to the flowchart found in Micron's datasheets. This may need to change in the future if it is determined that eventually, mode 0 is insufficient for the majority of the flash cells (and so for performance reasons, we should leave the flash in mode 1, 2, etc.). Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Huang Shijie <b32955@freescale.com>
2014-01-13mtd: nand: localize ECC failures per pageBrian Norris
ECC failures can be tracked at the page level, not the do_read_ops level (i.e., a potentially multi-page transaction). This helps prepare for READ RETRY support. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Huang Shijie <b32955@freescale.com>
2014-01-12mtd: nand: pxa3xx: Add "armada370-nand" compatibleEzequiel Garcia
Now that the driver can support the Armada 370/XP SoC NAND controller, add the devicetree compatible string, enabling its use. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-12mtd: mpc5121_nfc: adjust for OF based clock lookupGerhard Sittig
after device tree based clock lookup became available, the NAND flash driver need no longer use the previous global "nfc_clk" name, but should use the "ipg" clock name specific to the OF node Cc: David Woodhouse <dwmw2@infradead.org> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: Gerhard Sittig <gsi@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2014-01-11mtd: denali: kill the NAND_MAX_PAGESIZE/NAND_MAX_OOBSIZEHuang Shijie
This patch kills the NAND_MAX_PAGESIZE/NAND_MAX_OOBSIZE by the following way: 1.) change the @buf field of nand_buf{} from an array to a pointer. also remove the DENALI_BUF_SIZE macro. 2.) Before we call the nand_scan_ident, we allocate a temporary buffer whose size is PAGE_SIZE. 3.) After we finish the nand_scan_ident, we have already getten the page size and oob size. We will allocate the right buffer size again. Signed-off-by: Huang Shijie <shijie8@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-11mtd: mxc-nand: kill the NAND_MAX_PAGESIZE/NAND_MAX_OOBSIZEHuang Shijie
We kill the NAND_MAX_PAGESIZE/NAND_MAX_OOBSIZE by the following way: 1.) Before we call the nand_scan_ident, we allocate a temporary buffer whose size is PAGE_SIZE. 2.) After we finish the nand_scan_ident, we have already getten the page size and oob size. We will allocate the right buffer size again. Signed-off-by: Huang Shijie <shijie8@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-11mtd: nand: Update mtd.name assignment type to u64 for IFC, eLBCPrabhakar Kushwaha
mtd.name is assigned to IFC NAND physical address. Assignment type is u32. It is not providing correct physical address of IFC NAND. Update assignment type to u64. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-11mtd: nand: assign mtd->name in find_full_id_nandCai Zhiyong
This patch assigned the type->name to mtd->name when mtd->name is NULL in function "find_full_id_nand". mtd->name is NULL may cause some problem. Signed-off-by: Cai Zhiyong <caizhiyong@huawei.com> Acked-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
generated by cgit (git 2.34.1) at 2025-09-15 14:03:44 +0000