| Age | Commit message (Collapse) | Author |
|---|
|
The new BCM5760X chips will generate this new TX timestamp completion
when a TX packet's timestamp has been taken right before transmission.
The driver logic to retrieve the timestamp will be added in the next
few patches.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement netdev_queue_mgmt_ops for bnxt added in [1].
Two bnxt_rx_ring_info structs are allocated to hold the new/old queue
memory. Queue memory is copied from/to the main bp->rx_ring[idx]
bnxt_rx_ring_info.
Queue memory is pre-allocated in bnxt_queue_mem_alloc() into a clone,
and then copied into bp->rx_ring[idx] in bnxt_queue_mem_start().
Similarly, when bp->rx_ring[idx] is stopped its queue memory is copied
into a clone, and then freed later in bnxt_queue_mem_free().
I tested this patchset with netdev_rx_queue_restart(), including
inducing errors in all places that returns an error code. In all cases,
the queue is left in a good working state.
Rx queues are created/destroyed using bnxt_hwrm_rx_ring_alloc() and
bnxt_hwrm_rx_ring_free(), which issue HWRM_RING_ALLOC and HWRM_RING_FREE
commands respectively to the firmware. By the time a HWRM_RING_FREE
response is received, there won't be any more completions from that
queue.
Thanks to Somnath for helping me with this patch. With their permission
I've added them as Acked-by.
[1]: https://lore.kernel.org/netdev/20240501232549.1327174-2-shailend@google.com/
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
To prepare for queue API implementation, split rx ring functions out
from ring helpers. These new helpers will be called from queue API
implementation.
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
1e7962114c10 ("bnxt_en: Restore PTP tx_avail count in case of skb_pad() error")
165f87691a89 ("bnxt_en: add timestamping statistics support")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The current code only restores PTP tx_avail count when we get DMA
mapping errors. Fix it so that the PTP tx_avail count will be
restored for both DMA mapping errors and skb_pad() errors.
Otherwise PTP TX timestamp will not be available after a PTP
packet hits the skb_pad() error.
Fixes: 83bb623c968e ("bnxt_en: Transmit and retrieve packet timestamps")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240618215313.29631-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Firmware will now advertise a non-zero TSO max segments if the
device has a limit. 0 means no limit. The latest 5760X chip
(early revs) has a limit of 2047 that cannot be exceeded. If
exceeded, the chip will send out just a small number of segments.
Call netif_set_tso_max_segs() if the device has a limit.
Fixes: 2012a6abc876 ("bnxt_en: Add 5760X (P7) PCI IDs")
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240618215313.29631-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The relevant change is the max_tso_segs value returned by firmware
in the HWRM_FUNC_QCAPS response. This value will be used in the next
patch to cap the TSO segments.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240618215313.29631-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We need the driver core and sysfs fixes in here to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts, no adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
__hwrm_send()
In case of token is released due to token->state == BNXT_HWRM_DEFERRED,
released token (set to NULL) is used in log messages. This issue is
expected to be prevented by HWRM_ERR_CODE_PF_UNAVAILABLE error code. But
this error code is returned by recent firmware. So some firmware may not
return it. This may lead to NULL pointer dereference.
Adjust this issue by adding token pointer check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 8fa4219dba8e ("bnxt_en: add dynamic debug support for HWRM messages")
Suggested-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240611082547.12178-1-amishin@t-argos.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Firmware interface 1.10.2.118 has increased the size of
HWRM_PORT_PHY_QCFG response beyond the maximum size that can be
forwarded. When the VF's link state is not the default auto state,
the PF will need to forward the response back to the VF to indicate
the forced state. This regression may cause the VF to fail to
initialize.
Fix it by capping the HWRM_PORT_PHY_QCFG response to the maximum
96 bytes. The SPEEDS2_SUPPORTED flag needs to be cleared because the
new speeds2 fields are beyond the legacy structure. Also modify
bnxt_hwrm_fwd_resp() to print a warning if the message size exceeds 96
bytes to make this failure more obvious.
Fixes: 84a911db8305 ("bnxt_en: Update firmware interface to 1.10.2.118")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240612231736.57823-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the quest to make struct device constant, start by making
to_auxiliary_drv() return a constant pointer so that drivers that call
this can be fixed up before the driver core changes.
As the return type previously was not constant, also fix up all callers
that were assuming that the pointer was not going to be a constant one
in order to not break the build.
Cc: Dave Ertman <david.m.ertman@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Bingbu Cao <bingbu.cao@intel.com>
Cc: Tianshu Qiu <tian.shu.qiu@intel.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Michael Chan <michael.chan@broadcom.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: Saeed Mahameed <saeedm@nvidia.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Tariq Toukan <tariqt@nvidia.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Cc: Bard Liao <yung-chuan.liao@linux.intel.com>
Cc: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: linux-media@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: intel-wired-lan@lists.osuosl.org
Cc: linux-rdma@vger.kernel.org
Cc: sound-open-firmware@alsa-project.org
Cc: linux-sound@vger.kernel.org
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> # drivers/media/pci/intel/ipu6
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20240611130103.3262749-7-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
atomic_dec_if_positive returns new value regardless if it is updated or
not. The commit in fixes changed the behavior of the condition to one
that differs from original code. Restore original condition to properly
maintain atomic counter.
Fixes: 165f87691a89 ("bnxt_en: add timestamping statistics support")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240604091939.785535-1-vadfed@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ethtool_ts_stats structure was introduced earlier this year. Now
it's time to support this group of counters in more drivers.
This patch adds support to bnxt driver.
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240530204751.99636-1-vadfed@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Clang build brings a warning:
../drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:133:12: warning:
comparison of distinct pointer types ('typeof (tmo_us) *' (aka 'unsigned
int *') and 'typeof (65535) *' (aka 'int *'))
[-Wcompare-distinct-pointer-types]
133 | tmo_us = min(tmo_us, BNXT_PTP_QTS_MAX_TMO_US);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix it by specifying proper type for BNXT_PTP_QTS_MAX_TMO_US.
Fixes: 7de3c2218eed ("bnxt_en: Add a timeout parameter to bnxt_hwrm_port_ts_query()")
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240509151833.12579-1-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Simon reported that ndo_change_mtu() methods were never
updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted
in commit 501a90c94510 ("inet: protect against too small
mtu values.")
We read dev->mtu without holding RTNL in many places,
with READ_ONCE() annotations.
It is time to take care of ndo_change_mtu() methods
to use corresponding WRITE_ONCE()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Simon Horman <horms@kernel.org>
Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Current net-next/main does not boot for older chipsets e.g. Stratus.
Sample dmesg:
[ 11.368315] bnxt_en 0000:02:00.0 (unnamed net_device) (uninitialized): Able to reserve only 0 out of 9 requested RX rings
[ 11.390181] bnxt_en 0000:02:00.0 (unnamed net_device) (uninitialized): Unable to reserve tx rings
[ 11.438780] bnxt_en 0000:02:00.0 (unnamed net_device) (uninitialized): 2nd rings reservation failed.
[ 11.487559] bnxt_en 0000:02:00.0 (unnamed net_device) (uninitialized): Not enough rings available.
[ 11.506012] bnxt_en 0000:02:00.0: probe with driver bnxt_en failed with error -12
This is caused by bnxt_get_avail_msix() returning a negative value for
these chipsets not using the new resource manager i.e. !BNXT_NEW_RM.
This in turn causes hwr.cp in __bnxt_reserve_rings() to be set to 0.
In the current call stack, __bnxt_reserve_rings() is called from
bnxt_set_dflt_rings() before bnxt_init_int_mode(). Therefore,
bp->total_irqs is always 0 and for !BNXT_NEW_RM bnxt_get_avail_msix()
always returns a negative number.
Historically, MSIX vectors were requested by the RoCE driver during
run-time and bnxt_get_avail_msix() was used for this purpose. Today,
RoCE MSIX vectors are statically allocated. bnxt_get_avail_msix() should
only be called for the BNXT_NEW_RM() case to reserve the MSIX ahead of
time for RoCE use.
bnxt_get_avail_msix() is also be simplified to handle the BNXT_NEW_RM()
case only.
Fixes: d630624ebd70 ("bnxt_en: Utilize ulp client resources if RoCE is not registered")
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240502203757.3761827-1-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
No driver logic changes are required to support the VFs, so just add
the VF PCI ID.
Reviewed-by: Selvin Thyparampil Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240501003056.100607-7-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the error recovery path (AER, firmware recovery, etc), the
driver notifies the RoCE driver via ULP_STOP before the reset
and via ULP_START after the reset, all under RTNL_LOCK. The
RoCE driver can take a long time if there are a lot of QPs to
destroy, so it is not ideal to hold the global RTNL lock.
Rely on the new en_dev_lock mutex instead for ULP_STOP and
ULP_START. For the most part, we move the ULP_STOP call before
we take the RTNL lock and move the ULP_START after RTNL unlock.
Note that SRIOV re-enablement must be done after ULP_START
or RoCE on the VFs will not resume properly after reset.
The one scenario in bnxt_hwrm_if_change() where the RTNL lock
is already taken in the .ndo_open() context requires the ULP
restart to be deferred to the bnxt_sp_task() workqueue.
Reviewed-by: Selvin Thyparampil Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240501003056.100607-6-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The current scheme relies heavily on the RTNL lock for all ULP
operations between the L2 and the RoCE driver. Add a new en_dev_lock
mutex so that the asynchronous ULP_STOP and ULP_START operations
can be serialized with bnxt_register_dev() and bnxt_unregister_dev()
calls without relying on the RTNL lock. The next patch will remove
the RTNL lock from the ULP_STOP and ULP_START calls.
Reviewed-by: Selvin Thyparampil Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240501003056.100607-5-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is no need to call ULP_STOP and ULP_START before and after the
L2 reset in bnxt_reset_task(). This L2 reset is done after detecting
TX timeout, RX ring errors, or VF config changes. The L2 reset does
not affect RoCE since the firmware is not reset and the backing store
is left alone.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240501003056.100607-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Offline self test is a very disruptive operation for RoCE and requires
all active QPs to be destroyed. With a large number of QPs, it can
take a long time to destroy all the QPs and can timeout. Do not allow
ethtool offline self test if the RoCE driver is registered on the
device.
Reviewed-by: Selvin Thyparampil Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240501003056.100607-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On P5_PLUS chips and later, the NQ rings have subrings for RX and TX
completions respectively. These subrings are passed to the poll
function instead of the base NQ, but each ring carries its own
copy of the software ring statistics.
For stats to be conveniently accessible in __bnxt_poll_work(), the
statistics memory should either be shared between the NQ and its
subrings or the subrings need to be included in the ethtool stats
aggregation logic. This patch opts for the former, because it's more
efficient and less confusing having the software statistics for a
ring exist in a single place.
Before this patch, the counter will not be displayed if the "wrong"
cpr->sw_stats was used to increment a counter.
Link: https://lore.kernel.org/netdev/CACKFLikEhVAJA+osD7UjQNotdGte+fth7zOy7yDdLkTyFk9Pyw@mail.gmail.com/
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240501003056.100607-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/ti/icssg/icssg_prueth.c
net/mac80211/chan.c
89884459a0b9 ("wifi: mac80211: fix idle calculation with multi-link")
87f5500285fb ("wifi: mac80211: simplify ieee80211_assign_link_chanctx()")
https://lore.kernel.org/all/20240422105623.7b1fbda2@canb.auug.org.au/
net/unix/garbage.c
1971d13ffa84 ("af_unix: Suppress false-positive lockdep splat for spin_lock() in __unix_gc().")
4090fa373f0e ("af_unix: Replace garbage collection algorithm.")
drivers/net/ethernet/ti/icssg/icssg_prueth.c
drivers/net/ethernet/ti/icssg/icssg_common.c
4dcd0e83ea1d ("net: ti: icssg-prueth: Fix signedness bug in prueth_init_rx_chns()")
e2dc7bfd677f ("net: ti: icssg-prueth: Move common functions into a separate file")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
I added OOM and netpoll discard counters, naively assuming that
the cpr pointer is pointing to a common completion ring.
Turns out that is usually *a* completion ring but not *the*
completion ring which bnapi->cp_ring points to. bnapi->cp_ring
is where the stats are read from, so we end up reporting 0
thru ethtool -S and qstat even though the drop events have happened.
Make 100% sure we're recording statistics in the correct structure.
Fixes: 907fd4a294db ("bnxt: count discards due to memory allocation errors")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240424002148.3937059-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
ice: Support 5 layer Tx scheduler topology
Mateusz Polchlopek says:
For performance reasons there is a need to have support for selectable
Tx scheduler topology. Currently firmware supports only the default
9-layer and 5-layer topology. This patch series enables switch from
default to 5-layer topology, if user decides to opt-in.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: Document tx_scheduling_layers parameter
ice: Add tx_scheduling_layers devlink param
ice: Enable switching default Tx scheduler topology
ice: Adjust the VSI/Aggregator layers
ice: Support 5 layer topology
devlink: extend devlink_param *set pointer
====================
Link: https://lore.kernel.org/r/20240422203913.225151-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This driver currently doesn't support any control flags.
Use flow_rule_match_has_control_flags() to check for control flags,
such as can be set through `tc flower ... ip_flags frag`.
In case any control flags are masked, flow_rule_match_has_control_flags()
sets a NL extended error message, and we return -EOPNOTSUPP.
Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Tested-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Link: https://lore.kernel.org/r/20240422152626.175569-1-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend devlink_param *set function pointer to take extack as a param.
Sometimes it is needed to pass information to the end user from set
function. It is more proper to use for that netlink instead of passing
message to dmesg.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
During error recovery, such as AER fatal error slot reset, we call
bnxt_try_map_fw_health_reg() to try to get access to the health
register to determine the firmware state. Fix
bnxt_try_map_fw_health_reg() to recognize the P7 chip correctly
and set up the health register.
This fixes this type of AER slot reset failure:
bnxt_en 0000:04:00.0: AER: PCIe Bus Error: severity=Uncorrectable (Fatal), type=Inaccessible, (Unregistered Agent ID)
bnxt_en 0000:04:00.0 enp4s0f0np0: PCI I/O error detected
bnxt_en 0000:04:00.0 bnxt_re0: Handle device suspend call
bnxt_en 0000:04:00.1 enp4s0f1np1: PCI I/O error detected
bnxt_en 0000:04:00.1 bnxt_re1: Handle device suspend call
pcieport 0000:00:02.0: AER: Root Port link has been reset (0)
bnxt_en 0000:04:00.0 enp4s0f0np0: PCI Slot Reset
bnxt_en 0000:04:00.0: enabling device (0000 -> 0002)
bnxt_en 0000:04:00.0: Firmware not ready
bnxt_en 0000:04:00.1 enp4s0f1np1: PCI Slot Reset
bnxt_en 0000:04:00.1: enabling device (0000 -> 0002)
bnxt_en 0000:04:00.1: Firmware not ready
pcieport 0000:00:02.0: AER: device recovery failed
Fixes: a432a45bdba4 ("bnxt_en: Define basic P7 macros")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We do not support two simultaneous recoveries so check for reset
flag, BNXT_STATE_IN_FW_RESET, and do not proceed with AER further.
When the pci channel state is pci_channel_io_frozen, the PCIe link
can not be trusted so we disable the traffic immediately and stop
BAR access by calling bnxt_fw_fatal_close(). BAR access after
AER fatal error can cause an NMI.
Fixes: f75d9a0aa967 ("bnxt_en: Re-write PCI BARs after PCI fatal error.")
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce bnxt_fw_fatal_close() API which can be used
to stop data path and disable device when firmware
is in fatal state.
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
net/unix/garbage.c
47d8ac011fe1 ("af_unix: Fix garbage collector racing against connect()")
4090fa373f0e ("af_unix: Replace garbage collection algorithm.")
Adjacent changes:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
faa12ca24558 ("bnxt_en: Reset PTP tx_avail after possible firmware reset")
b3d0083caf9a ("bnxt_en: Support RSS contexts in ethtool .{get|set}_rxfh()")
drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c
7ac10c7d728d ("bnxt_en: Fix possible memory leak in bnxt_rdma_aux_device_init()")
194fad5b2781 ("bnxt_en: Refactor bnxt_rdma_aux_device_init/uninit functions")
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
958f56e48385 ("net/mlx5e: Un-expose functions in en.h")
49e6c9387051 ("net/mlx5e: RSS, Block XOR hash with over 128 channels")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update MODULE_DESCRIPTION to the more generic adapter family name.
The old name only includes the first generation of supported
adapters.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240409215431.41424-8-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If the RoCE driver is not registered for a RoCE capable device, add
flexibility to use the RoCE resources (MSIX/NQs) for L2 purposes,
such as additional rings configured by the user or for XDP.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240409215431.41424-7-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The existing scheme sets aside a number of MSIX/NQs for the RoCE
driver whether the RoCE driver is registered or not. This scheme
is not flexible and limits the resources available for the L2 rings
if RoCE is never used.
Modify the scheme so that the RoCE MSIX/NQs can be used by the L2
driver if they are not used for RoCE. The MSIX/NQs are now
represented by 3 fields. bp->ulp_num_msix_want contains the
desired default value, edev->ulp_num_msix_vec contains the
available value (but not necessarily in use), and
ulp_tbl->msix_requested contains the actual value in use by RoCE.
The L2 driver can dip into edev->ulp_num_msix_vec if necessary.
We need to add rtnl_lock() back in bnxt_register_dev() and
bnxt_unregister_dev() to synchronize the MSIX usage between L2 and
RoCE.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240409215431.41424-6-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In its current form, bnxt_rdma_aux_device_init() not only initializes
the necessary data structures of the newly created aux device but also
adds the aux device into the aux bus subsytem. Refactor the logic into
separate functions, first function to initialize the aux device along
with the required resources and second, to actually add the device to
the aux bus subsytem.
This separation helps to create bnxt_en_dev much earlier and save its
resources separately.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240409215431.41424-5-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ever since commit:
303432211324 ("bnxt_en: Remove runtime interrupt vector allocation")
The MSIX base vector is effectively always 0. Remove all unneeded
structure fields and code referencing the MSIX base.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240409215431.41424-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The memory for "edev->ulp_tbl" is allocated inside the
bnxt_rdma_aux_device_init() function. If it fails, the driver
will not create the auxiliary device for RoCE. Hence the NULL
check inside bnxt_register_dev() is unnecessary.
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240409215431.41424-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The current implementation requires the ifstate to be up when
configuring the RSS contexts. It will try to fetch the RX ring
IDs and will crash if it is in ifdown state. Return error if
!netif_running() to prevent the crash.
An improved implementation is in the works to allow RSS contexts
to be changed while in ifdown state.
Fixes: b3d0083caf9a ("bnxt_en: Support RSS contexts in ethtool .{get|set}_rxfh()")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240409215431.41424-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It is possible that during error recovery and firmware reset,
there is a pending TX PTP packet waiting for the timestamp.
We need to reset this condition so that after recovery, the
tx_avail count for PTP is reset back to the initial value.
Otherwise, we may not accept any PTP TX timestamps after
recovery.
Fixes: 118612d519d8 ("bnxt_en: Add PTP clock APIs, ioctls, and ethtool methods")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since runtime MSIXs vector allocation/free has been removed,
the L2 driver needs to repopulate the MSIX entries for the
ulp client as the irq table may change during the recovery
process.
Fixes: 303432211324 ("bnxt_en: Remove runtime interrupt vector allocation")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If ulp = kzalloc() fails, the allocated edev will leak because it is
not properly assigned and the cleanup path will not be able to free it.
Fix it by assigning it properly immediately after allocation.
Fixes: 303432211324 ("bnxt_en: Remove runtime interrupt vector allocation")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use the correct tmo_us microsecond parameter for the PTP firmware
timeout parameter.
Fixes: 7de3c2218eed ("bnxt_en: Add a timeout parameter to bnxt_hwrm_port_ts_query()")
Reported-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240404195500.171071-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some chips may not allow changing default speed when dual rate
transceivers modules are used. Firmware on those chips will
indicate the same to the driver.
Add a warning message when speed change is not supported
because a dual rate transceiver is detected by the NIC.
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240402093753.331120-8-pavan.chebbi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This updated interface supports backing store APIs to
configure host FW trace buffers, updates transceivers ID
types, updates to TrueFlow features and other changes
for the basic L2 features.
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240402093753.331120-7-pavan.chebbi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
- Change the last arg to xdp_prepare_buff to true from false.
- Ensure that when XDP_PASS is returned the xdp->data_meta area
is copied to the skb->data area. Account for the meta data
size on skb allocation and do a pull after to move it to the
"reserved" zone.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240402093753.331120-6-pavan.chebbi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Change bnxt_rx_xdp() to take a pointer to xdp instead of stack
variable.
This is in prepartion for the XDP metadata patch change where
the BPF program can change the value of the xdp.meta_data.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240402093753.331120-5-pavan.chebbi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Driver's Page Pool allocation code looks at the node local
to the PCIe device to determine where to allocate memory.
In scenarios where the core count per NUMA node is low (< default rings)
it makes sense to exhaust page pool allocations on
Node 0 first and then moving on to allocating page pools
for the remaining rings from Node 1.
With this patch, and the following configuration on the NIC
$ ethtool -L ens1f0np0 combined 16
(core count/node = 12, first 12 rings on node#0, last 4 rings node#1)
and traffic redirected to a ring on node#1 , we see a performance
improvement of ~20%
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240402093753.331120-4-pavan.chebbi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Enable XPS on default during NIC open. The choice of
Tx queue is based on the CPU executing the thread that
submits the Tx request. The pool of Tx queues will be
spread evenly across both device-attached NUMA nodes(local)
and remote NUMA nodes.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240402093753.331120-3-pavan.chebbi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In case of DPC, after issuing the hot reset, the
kernel waits for 100ms for the device to complete
the reset. However on some older chips, the firmware
may take up to 1 second to complete the reset, only
after which the driver can restart the card.
Introduce delay of 900ms to handle this scenario on
the older chipsets.
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240402093753.331120-2-pavan.chebbi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
