summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/hisilicon
AgeCommit message (Collapse)Author
2024-10-21net: hibmcge: Add mdio and hardware configuration supported in this moduleJijie Shao
Implements the C22 read and write PHY registers interfaces. Some hardware interfaces related to the PHY are also implemented in this patch. Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-10-21net: hibmcge: Add read/write registers supported through the bar spaceJijie Shao
Add support for to read and write registers through the pic bar space. Some driver parameters, such as mac_id, are determined by the board form. Therefore, these parameters are initialized from the register as device specifications. the device specifications register are initialized and written by bmc. driver will read these registers when loading. Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-10-21net: hibmcge: Add pci table supported in this moduleJijie Shao
Add pci table supported in this module, and implement pci_driver function to initialize this driver. hibmcge is a passthrough network device. Its software runs on the host side, and the MAC hardware runs on the BMC side to reduce the host CPU area. The software interacts with the MAC hardware through the PCIe. ┌─────────────────────────┐ │ HOST CPU network device │ │ ┌──────────────┐ │ │ │hibmcge driver│ │ │ └─────┬─┬──────┘ │ │ │ │ │ │HOST ┌───┴─┴───┐ │ │ │ PCIE RC │ │ └──────┴───┬─┬───┴────────┘ │ │ PCIE │ │ ┌──────┬───┴─┴───┬────────┐ │ │ PCIE EP │ │ │BMC └───┬─┬───┘ │ │ │ │ │ │ ┌────────┴─┴──────────┐ │ │ │ GE │ │ │ │ ┌─────┐ ┌─────┐ │ │ │ │ │ MAC │ │ MAC │ │ │ └─┴─┼─────┼────┼─────┼──┴─┘ │ PHY │ │ PHY │ └─────┘ └─────┘ Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-10-04net: ethernet: Switch back to struct platform_driver::remove()Uwe Kleine-König
After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all platform drivers below drivers/net/ethernet to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://patch.msgid.link/18f7c585a1a8a8ac8b03a2fca7de19bd5c52ac2b.1727949050.git.u.kleine-koenig@baylibre.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-04net: hns: hisilicon: hns_dsaf_mac: switch to scoped device_for_each_child_node()Javier Carrasco
Use device_for_each_child_node_scoped() to simplify the code by removing the need for explicit calls to fwnode_handle_put() in every error path. This approach also accounts for any error path that could be added. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20240930-net-device_for_each_child_node_scoped-v2-2-35f09333c1d7@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-03net: hns3: Remove setting of RX software timestampGal Pressman
The responsibility for reporting of RX software timestamp has moved to the core layer (see __ethtool_get_ts_info()), remove usage from the device drivers. Reviewed-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Jijie Shao <shaojijie@huawei.com> Link: https://patch.msgid.link/20240901112803.212753-11-gal@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-29net: hns: Use IS_ERR_OR_NULL() helper functionHongbo Li
Use the IS_ERR_OR_NULL() helper instead of open-coding a NULL and an error pointer checks to simplify the code and improve readability. Signed-off-by: Hongbo Li <lihongbo22@huawei.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20240828122336.3697176-1-lihongbo22@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-28net: hisilicon: hns_mdio: fix OF node leak in probe()Krzysztof Kozlowski
Driver is leaking OF node reference from of_parse_phandle_with_fixed_args() in probe(). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240827144421.52852-4-krzysztof.kozlowski@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-28net: hisilicon: hns_dsaf_mac: fix OF node leak in hns_mac_get_info()Krzysztof Kozlowski
Driver is leaking OF node reference from of_parse_phandle_with_fixed_args() in hns_mac_get_info(). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240827144421.52852-3-krzysztof.kozlowski@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-28net: hisilicon: hip04: fix OF node leak in probe()Krzysztof Kozlowski
Driver is leaking OF node reference from of_parse_phandle_with_fixed_args() in probe(). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240827144421.52852-2-krzysztof.kozlowski@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-20net: hns3: Use ARRAY_SIZE() to improve readabilityZhang Zekun
There is a helper function ARRAY_SIZE() to help calculating the u32 array size, and we don't need to do it mannually. So, let's use ARRAY_SIZE() to calculate the array size, and improve the code readability. Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com> Reviewed-by: Jijie Shao<shaojijie@huawei.com> Link: https://patch.msgid.link/20240818052518.45489-1-zhangzekun11@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-16net: hns3: Use ipv6_addr_{cpu_to_be32,be32_to_cpu} helpersSimon Horman
Use new ipv6_addr_cpu_to_be32 and ipv6_addr_be32_to_cpu helpers, and IPV6_ADDR_WORDS. This is arguably slightly nicer. No functional change intended. Compile tested only. Suggested-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/netdev/c7684349-535c-45a4-9a74-d47479a50020@lunn.ch/ Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240813-ipv6_addr-helpers-v2-3-5c974f8cca3e@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-15net: hns3: use correct release function during uninitializationPeiyang Wang
pci_request_regions is called to apply for PCI I/O and memory resources when the driver is initialized, Therefore, when the driver is uninstalled, pci_release_regions should be used to release PCI I/O and memory resources instead of pci_release_mem_regions is used to release memory reasouces only. Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-15net: hns3: void array out of bound when loop tnl_numPeiyang Wang
When query reg inf of SSU, it loops tnl_num times. However, tnl_num comes from hardware and the length of array is a fixed value. To void array out of bound, make sure the loop time is not greater than the length of array Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-15net: hns3: fix a deadlock problem when config TC during resettingJie Wang
When config TC during the reset process, may cause a deadlock, the flow is as below: pf reset start │ ▼ ...... setup tc │ │ ▼ ▼ DOWN: napi_disable() napi_disable()(skip) │ │ │ ▼ ▼ ...... ...... │ │ ▼ │ napi_enable() │ ▼ UINIT: netif_napi_del() │ ▼ ...... │ ▼ INIT: netif_napi_add() │ ▼ ...... global reset start │ │ ▼ ▼ UP: napi_enable()(skip) ...... │ │ ▼ ▼ ...... napi_disable() In reset process, the driver will DOWN the port and then UINIT, in this case, the setup tc process will UP the port before UINIT, so cause the problem. Adds a DOWN process in UINIT to fix it. Fixes: bb6b94a896d4 ("net: hns3: Add reset interface implementation in client") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-15net: hns3: use the user's cfg after resetPeiyang Wang
Consider the followed case that the user change speed and reset the net interface. Before the hw change speed successfully, the driver get old old speed from hw by timer task. After reset, the previous speed is config to hw. As a result, the new speed is configed successfully but lost after PF reset. The followed pictured shows more dirrectly. +------+ +----+ +----+ | USER | | PF | | HW | +---+--+ +-+--+ +-+--+ | ethtool -s 100G | | +------------------>| set speed 100G | | +--------------------->| | | set successfully | | |<---------------------+---+ | |query cfg (timer task)| | | +--------------------->| | handle speed | | return 200G | | changing event | ethtool --reset |<---------------------+ | (100G) +------------------>| cfg previous speed |<--+ | | after reset (200G) | | +--------------------->| | | +---+ | |query cfg (timer task)| | | +--------------------->| | handle speed | | return 100G | | changing event | |<---------------------+ | (200G) | | |<--+ | |query cfg (timer task)| | +--------------------->| | | return 200G | | |<---------------------+ | | | v v v This patch save new speed if hw change speed successfully, which will be used after reset successfully. Fixes: 2d03eacc0b7e ("net: hns3: Only update mac configuation when necessary") Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-15net: hns3: fix wrong use of semaphore upJie Wang
Currently, if hns3 PF or VF FLR reset failed after five times retry, the reset done process will directly release the semaphore which has already released in hclge_reset_prepare_general. This will cause down operation fail. So this patch fixes it by adding reset state judgement. The up operation is only called after successful PF FLR reset. Fixes: 8627bdedc435 ("net: hns3: refactor the precedure of PF FLR") Fixes: f28368bb4542 ("net: hns3: refactor the procedure of VF FLR") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-15net: Add struct kernel_ethtool_ts_infoKory Maincent
In prevision to add new UAPI for hwtstamp we will be limited to the struct ethtool_ts_info that is currently passed in fixed binary format through the ETHTOOL_GET_TS_INFO ethtool ioctl. It would be good if new kernel code already started operating on an extensible kernel variant of that structure, similar in concept to struct kernel_hwtstamp_config vs struct hwtstamp_config. Since struct ethtool_ts_info is in include/uapi/linux/ethtool.h, here we introduce the kernel-only structure in include/linux/ethtool.h. The manual copy is then made in the function called by ETHTOOL_GET_TS_INFO. Acked-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Link: https://patch.msgid.link/20240709-feature_ptp_netnext-v17-6-b5317f50df2a@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. No conflicts, no adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-07net: hns3: add cond_resched() to hns3 ring buffer init processJie Wang
Currently hns3 ring buffer init process would hold cpu too long with big Tx/Rx ring depth. This could cause soft lockup. So this patch adds cond_resched() to the process. Then cpu can break to run other tasks instead of busy looping. Fixes: a723fb8efe29 ("net: hns3: refine for set ring parameters") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-07net: hns3: fix kernel crash problem in concurrent scenarioYonglong Liu
When link status change, the nic driver need to notify the roce driver to handle this event, but at this time, the roce driver may uninit, then cause kernel crash. To fix the problem, when link status change, need to check whether the roce registered, and when uninit, need to wait link update finish. Fixes: 45e92b7e4e27 ("net: hns3: add calling roce callback function when link status change") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-05-30hns3: avoid linking objects into multiple modulesArnd Bergmann
Each object file contains information about which module it gets linked into, so linking the same file into multiple modules now causes a warning: scripts/Makefile.build:254: drivers/net/ethernet/hisilicon/hns3/Makefile: hns3_common/hclge_comm_cmd.o is added to multiple modules: hclge hclgevf scripts/Makefile.build:254: drivers/net/ethernet/hisilicon/hns3/Makefile: hns3_common/hclge_comm_rss.o is added to multiple modules: hclge hclgevf scripts/Makefile.build:254: drivers/net/ethernet/hisilicon/hns3/Makefile: hns3_common/hclge_comm_tqp_stats.o is added to multiple modules: hclge hclgevf Change the way that hns3 is built by moving the three common files into a separate module with exported symbols instead. Fixes: 5f20be4e90e6 ("net: hns3: refactor hns3 makefile to support hns3_common module") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240528161603.2443125-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-22tracing/treewide: Remove second parameter of __assign_str()Steven Rostedt (Google)
With the rework of how the __string() handles dynamic strings where it saves off the source string in field in the helper structure[1], the assignment of that value to the trace event field is stored in the helper value and does not need to be passed in again. This means that with: __string(field, mystring) Which use to be assigned with __assign_str(field, mystring), no longer needs the second parameter and it is unused. With this, __assign_str() will now only get a single parameter. There's over 700 users of __assign_str() and because coccinelle does not handle the TRACE_EVENT() macro I ended up using the following sed script: git grep -l __assign_str | while read a ; do sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file; mv /tmp/test-file $a; done I then searched for __assign_str() that did not end with ';' as those were multi line assignments that the sed script above would fail to catch. Note, the same updates will need to be done for: __assign_str_len() __assign_rel_str() __assign_rel_str_len() I tested this with both an allmodconfig and an allyesconfig (build only for both). [1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/ Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts. Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs Tested-by: Guenter Roeck <linux@roeck-us.net>
2024-05-18Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma updates from Jason Gunthorpe: "Aside from the usual things this has an arch update for __iowrite64_copy() used by the RDMA drivers. This API was intended to generate large 64 byte MemWr TLPs on PCI. These days most processors had done this by just repeating writel() in a loop. S390 and some new ARM64 designs require a special helper to get this to generate. - Small improvements and fixes for erdma, efa, hfi1, bnxt_re - Fix a UAF crash after module unload on leaking restrack entry - Continue adding full RDMA support in mana with support for EQs, GID's and CQs - Improvements to the mkey cache in mlx5 - DSCP traffic class support in hns and several bug fixes - Cap the maximum number of MADs in the receive queue to avoid OOM - Another batch of rxe bug fixes from large scale testing - __iowrite64_copy() optimizations for write combining MMIO memory - Remove NULL checks before dev_put/hold() - EFA support for receive with immediate - Fix a recent memleaking regression in a cma error path" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (70 commits) RDMA/cma: Fix kmemleak in rdma_core observed during blktests nvme/rdma use siw RDMA/IPoIB: Fix format truncation compilation errors bnxt_re: avoid shift undefined behavior in bnxt_qplib_alloc_init_hwq RDMA/efa: Support QP with unsolicited write w/ imm. receive IB/hfi1: Remove generic .ndo_get_stats64 IB/hfi1: Do not use custom stat allocator RDMA/hfi1: Use RMW accessors for changing LNKCTL2 RDMA/mana_ib: implement uapi for creation of rnic cq RDMA/mana_ib: boundary check before installing cq callbacks RDMA/mana_ib: introduce a helper to remove cq callbacks RDMA/mana_ib: create and destroy RNIC cqs RDMA/mana_ib: create EQs for RNIC CQs RDMA/core: Remove NULL check before dev_{put, hold} RDMA/ipoib: Remove NULL check before dev_{put, hold} RDMA/mlx5: Remove NULL check before dev_{put, hold} RDMA/mlx5: Track DCT, DCI and REG_UMR QPs as diver_detail resources. RDMA/core: Add an option to display driver-specific QPs in the rdmatool RDMA/efa: Add shutdown notifier RDMA/mana_ib: Fix missing ret value IB/mlx5: Use __iowrite64_copy() for write combining stores ...
2024-05-18Merge tag 'kbuild-v6.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Avoid 'constexpr', which is a keyword in C23 - Allow 'dtbs_check' and 'dt_compatible_check' run independently of 'dt_binding_check' - Fix weak references to avoid GOT entries in position-independent code generation - Convert the last use of 'optional' property in arch/sh/Kconfig - Remove support for the 'optional' property in Kconfig - Remove support for Clang's ThinLTO caching, which does not work with the .incbin directive - Change the semantics of $(src) so it always points to the source directory, which fixes Makefile inconsistencies between upstream and downstream - Fix 'make tar-pkg' for RISC-V to produce a consistent package - Provide reasonable default coverage for objtool, sanitizers, and profilers - Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc. - Remove the last use of tristate choice in drivers/rapidio/Kconfig - Various cleanups and fixes in Kconfig * tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits) kconfig: use sym_get_choice_menu() in sym_check_prop() rapidio: remove choice for enumeration kconfig: lxdialog: remove initialization with A_NORMAL kconfig: m/nconf: merge two item_add_str() calls kconfig: m/nconf: remove dead code to display value of bool choice kconfig: m/nconf: remove dead code to display children of choice members kconfig: gconf: show checkbox for choice correctly kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal Makefile: remove redundant tool coverage variables kbuild: provide reasonable defaults for tool coverage modules: Drop the .export_symbol section from the final modules kconfig: use menu_list_for_each_sym() in sym_check_choice_deps() kconfig: use sym_get_choice_menu() in conf_write_defconfig() kconfig: add sym_get_choice_menu() helper kconfig: turn defaults and additional prompt for choice members into error kconfig: turn missing prompt for choice members into error kconfig: turn conf_choice() into void function kconfig: use linked list in sym_set_changed() kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED kconfig: gconf: remove debug code ...
2024-05-10kbuild: use $(src) instead of $(srctree)/$(src) for source directoryMasahiro Yamada
Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for checked-in source files. It is merely a convention without any functional difference. In fact, $(obj) and $(src) are exactly the same, as defined in scripts/Makefile.build: src := $(obj) When the kernel is built in a separate output directory, $(src) does not accurately reflect the source directory location. While Kbuild resolves this discrepancy by specifying VPATH=$(srctree) to search for source files, it does not cover all cases. For example, when adding a header search path for local headers, -I$(srctree)/$(src) is typically passed to the compiler. This introduces inconsistency between upstream and downstream Makefiles because $(src) is used instead of $(srctree)/$(src) for the latter. To address this inconsistency, this commit changes the semantics of $(src) so that it always points to the directory in the source tree. Going forward, the variables used in Makefiles will have the following meanings: $(obj) - directory in the object tree $(src) - directory in the source tree (changed by this commit) $(objtree) - the top of the kernel object tree $(srctree) - the top of the kernel source tree Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced with $(src). Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2024-05-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c 35d92abfbad8 ("net: hns3: fix kernel crash when devlink reload during initialization") 2a1a1a7b5fd7 ("net: hns3: add command queue trace for hns3") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-09net: hns3: fix kernel crash when devlink reload during initializationYonglong Liu
The devlink reload process will access the hardware resources, but the register operation is done before the hardware is initialized. So, processing the devlink reload during initialization may lead to kernel crash. This patch fixes this by registering the devlink after hardware initialization. Fixes: cd6242991d2e ("net: hns3: add support for registering devlink for VF") Fixes: 93305b77ffcb ("net: hns3: fix kernel crash when devlink reload during pf initialization") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-09net: hns3: fix port vlan filter not disabled issueYonglong Liu
According to hardware limitation, for device support modify VLAN filter state but not support bypass port VLAN filter, it should always disable the port VLAN filter. but the driver enables port VLAN filter when initializing, if there is no VLAN(except VLAN 0) id added, the driver will disable it in service task. In most time, it works fine. But there is a time window before the service task shceduled and net device being registered. So if user adds VLAN at this time, the driver will not update the VLAN filter state, and the port VLAN filter remains enabled. To fix the problem, if support modify VLAN filter state but not support bypass port VLAN filter, set the port vlan filter to "off". Fixes: 184cd221a863 ("net: hns3: disable port VLAN filter when support function level VLAN filter control") Fixes: 2ba306627f59 ("net: hns3: add support for modify VLAN filter state") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-09net: hns3: use appropriate barrier function after setting a bit valuePeiyang Wang
There is a memory barrier in followed case. When set the port down, hclgevf_set_timmer will set DOWN in state. Meanwhile, the service task has different behaviour based on whether the state is DOWN. Thus, to make sure service task see DOWN, use smp_mb__after_atomic after calling set_bit(). CPU0 CPU1 ========================== =================================== hclgevf_set_timer_task() hclgevf_periodic_service_task() set_bit(DOWN,state) test_bit(DOWN,state) pf also has this issue. Fixes: ff200099d271 ("net: hns3: remove unnecessary work in hclgevf_main") Fixes: 1c6dfe6fc6f7 ("net: hns3: remove mailbox and reset work in hclge_main") Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-09net: hns3: release PTP resources if pf initialization failedPeiyang Wang
During the PF initialization process, hclge_update_port_info may return an error code for some reason. At this point, the ptp initialization has been completed. To void memory leaks, the resources that are applied by ptp should be released. Therefore, when hclge_update_port_info returns an error code, hclge_ptp_uninit is called to release the corresponding resources. Fixes: eaf83ae59e18 ("net: hns3: add querying fec ability from firmware") Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-09net: hns3: change type of numa_node_mask as nodemask_tPeiyang Wang
It provides nodemask_t to describe the numa node mask in kernel. To improve transportability, change the type of numa_node_mask as nodemask_t. Fixes: 38caee9d3ee8 ("net: hns3: Add support of the HNAE3 framework") Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-09net: hns3: direct return when receive a unknown mailbox messageJian Shen
Currently, the driver didn't return when receive a unknown mailbox message, and continue checking whether need to generate a response. It's unnecessary and may be incorrect. Fixes: bb5790b71bad ("net: hns3: refactor mailbox response scheme between PF and VF") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-09net: hns3: using user configure after hardware resetPeiyang Wang
When a reset occurring, it's supposed to recover user's configuration. Currently, the port info(speed, duplex and autoneg) is stored in hclge_mac and will be scheduled updated. Consider the case that reset was happened consecutively. During the first reset, the port info is configured with a temporary value cause the PHY is reset and looking for best link config. Second reset start and use pervious configuration which is not the user's. The specific process is as follows: +------+ +----+ +----+ | USER | | PF | | HW | +---+--+ +-+--+ +-+--+ | ethtool --reset | | +------------------->| reset command | | ethtool --reset +-------------------->| +------------------->| +---+ | +---+ | | | | |reset currently | | HW RESET | | |and wait to do | | | |<--+ | | | | send pervious cfg |<--+ | | (1000M FULL AN_ON) | | +-------------------->| | | read cfg(time task) | | | (10M HALF AN_OFF) +---+ | |<--------------------+ | cfg take effect | | reset command |<--+ | +-------------------->| | | +---+ | | send pervious cfg | | HW RESET | | (10M HALF AN_OFF) |<--+ | +-------------------->| | | read cfg(time task) | | | (10M HALF AN_OFF) +---+ | |<--------------------+ | cfg take effect | | | | | | read cfg(time task) |<--+ | | (10M HALF AN_OFF) | | |<--------------------+ | | | v v v To avoid aboved situation, this patch introduced req_speed, req_duplex, req_autoneg to store user's configuration and it only be used after hardware reset and to recover user's configuration Fixes: f5f2b3e4dcc0 ("net: hns3: add support for imp-controlled PHYs") Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-07net: annotate writes on dev->mtu from ndo_change_mtu()Eric Dumazet
Simon reported that ndo_change_mtu() methods were never updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted in commit 501a90c94510 ("inet: protect against too small mtu values.") We read dev->mtu without holding RTNL in many places, with READ_ONCE() annotations. It is time to take care of ndo_change_mtu() methods to use corresponding WRITE_ONCE() Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Simon Horman <horms@kernel.org> Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/ Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-24net: hns3: flower: validate control flagsAsbjørn Sloth Tønnesen
This driver currently doesn't support any control flags. Use flow_rule_has_control_flags() to check for control flags, such as can be set through `tc flower ... ip_flags frag`. In case any control flags are masked, flow_rule_has_control_flags() sets a NL extended error message, and we return -EOPNOTSUPP. Also propagate extack to hclge_get_cls_key_ip(), and convert it to return error code. Only compile-tested. Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Tested-by: Jijie Shao <shaojijie@huawei.com> Link: https://lore.kernel.org/r/20240422152717.175659-1-ast@fiberby.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-22net: hns3: Remove io_stop_wc() calls after __iowrite64_copy()Jason Gunthorpe
Now that the ARM64 arch implementation does the DGH as part of __iowrite64_copy() there is no reason to open code this in drivers. Link: https://lore.kernel.org/r/5-v3-1893cd8b9369+1925-mlx5_arm_wc_jgg@nvidia.com Reviewed-by: Jijie Shao<shaojijie@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2024-04-12net: hns3: add support to query scc version by devlink infoHao Chen
Add support to query scc version by devlink info for device V3. Signed-off-by: Hao Chen <chenhao418@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Link: https://lore.kernel.org/r/20240410125354.2177067-5-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-12net: hns3: dump more reg info based on ras modPeiyang Wang
When the driver received an interrupte for hardware error, it will try to restore by resetting. But the hardware registers will also be reset at this case, which make it hard to analysis why the hardware error occurs. This patch dumps these registers before resetting to help analyze the hardware error occurs. Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240410125354.2177067-4-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-12net: hns3: move constants from hclge_debugfs.h to hclge_debugfs.cJijie Shao
some constants are defined in hclge_debugfs.h, but only used in hclge_debugfs.c. so move them from hclge_debugfs.h to hclge_debugfs.c. Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240410125354.2177067-3-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-12net: hns3: add command queue trace for hns3Hao Lan
Add support to dump command queue trace for hns3. Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Link: https://lore.kernel.org/r/20240410125354.2177067-2-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-26net: hns3: mark unexcuted loopback test result as UNEXECUTEDJian Shen
Currently, loopback test may be skipped when resetting, but the test result will still show as 'PASS', because the driver doesn't set ETH_TEST_FL_FAILED flag. Fix it by setting the flag and initializating the value to UNEXECUTED. Fixes: 4c8dab1c709c ("net: hns3: reconstruct function hns3_self_test") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-03-26net: hns3: fix kernel crash when devlink reload during pf initializationYonglong Liu
The devlink reload process will access the hardware resources, but the register operation is done before the hardware is initialized. So, processing the devlink reload during initialization may lead to kernel crash. This patch fixes this by taking devl_lock during initialization. Fixes: b741269b2759 ("net: hns3: add support for registering devlink for PF") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-03-26net: hns3: fix index limit to support all queue statsJie Wang
Currently, hns hardware supports more than 512 queues and the index limit in hclge_comm_tqps_update_stats is wrong. So this patch removes it. Fixes: 287db5c40d15 ("net: hns3: create new set of common tqp stats APIs for PF and VF reuse") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-03-18net: hns3: tracing: fix hclgevf trace event stringsSteven Rostedt (Google)
The __string() and __assign_str() helper macros of the TRACE_EVENT() macro are going through some optimizations where only the source string of __string() will be used and the __assign_str() source will be ignored and later removed. To make sure that there's no issues, a new check is added between the __string() src argument and the __assign_str() src argument that does a strcmp() to make sure they are the same string. The hclgevf trace events have: __assign_str(devname, &hdev->nic.kinfo.netdev->name); Which triggers the warning: hclgevf_trace.h:34:39: error: passing argument 1 of ‘strcmp’ from incompatible pointer type [-Werror=incompatible-pointer-types] 34 | __assign_str(devname, &hdev->nic.kinfo.netdev->name); [..] arch/x86/include/asm/string_64.h:75:24: note: expected ‘const char *’ but argument is of type ‘char (*)[16]’ 75 | int strcmp(const char *cs, const char *ct); | ~~~~~~~~~~~~^~ Because __assign_str() now has: WARN_ON_ONCE(__builtin_constant_p(src) ? \ strcmp((src), __data_offsets.dst##_ptr_) : \ (src) != __data_offsets.dst##_ptr_); \ The problem is the '&' on hdev->nic.kinfo.netdev->name. That's because that name is: char name[IFNAMSIZ] Where passing an address '&' of a char array is not compatible with strcmp(). The '&' is not necessary, remove it. Link: https://lore.kernel.org/linux-trace-kernel/20240313093454.3909afe7@gandalf.local.home Cc: netdev <netdev@vger.kernel.org> Cc: Yisen Zhuang <yisen.zhuang@huawei.com> Cc: Salil Mehta <salil.mehta@huawei.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Yufeng Mo <moyufeng@huawei.com> Cc: Huazhong Tan <tanhuazhong@huawei.com> Cc: stable@vger.kernel.org Acked-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Jijie Shao <shaojijie@huawei.com> Fixes: d8355240cf8fb ("net: hns3: add trace event support for PF/VF mailbox") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-03-08net: hns3: add checking for vf id of mailboxJian Shen
Add checking for vf id of mailbox, in order to avoid array out-of-bounds risk. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-08net: hns3: fix port duplex configure error in IMP resetJie Wang
Currently, the mac port is fixed to configured as full dplex mode in hclge_mac_init() when driver initialization or reset restore. Users may change the mode to half duplex with ethtool, so it may cause the user configuration dropped after reset. To fix it, don't change the duplex mode when resetting. Fixes: 2d03eacc0b7e ("net: hns3: Only update mac configuation when necessary") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-08net: hns3: fix reset timeout under full functions and queuesPeiyang Wang
The cmdq reset command times out when all VFs are enabled and the queue is full. The hardware processing time exceeds the timeout set by the driver. In order to avoid the above extreme situations, the driver extends the reset timeout to 1 second. Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-08net: hns3: fix delete tc fail issueJijie Shao
When the tc is removed during reset, hns3 driver will return a errcode. But kernel ignores this errcode, As a result, the driver status is inconsistent with the kernel status. This patch retains the deletion status when the deletion fails and continues to delete after the reset to ensure that the status of the driver is consistent with that of kernel. Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-08net: hns3: fix kernel crash when 1588 is received on HIP08 devicesYonglong Liu
The HIP08 devices does not register the ptp devices, so the hdev->ptp is NULL, but the hardware can receive 1588 messages, and set the HNS3_RXD_TS_VLD_B bit, so, if match this case, the access of hdev->ptp->flags will cause a kernel crash: [ 5888.946472] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 [ 5888.946475] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 ... [ 5889.266118] pc : hclge_ptp_get_rx_hwts+0x40/0x170 [hclge] [ 5889.272612] lr : hclge_ptp_get_rx_hwts+0x34/0x170 [hclge] [ 5889.279101] sp : ffff800012c3bc50 [ 5889.283516] x29: ffff800012c3bc50 x28: ffff2040002be040 [ 5889.289927] x27: ffff800009116484 x26: 0000000080007500 [ 5889.296333] x25: 0000000000000000 x24: ffff204001c6f000 [ 5889.302738] x23: ffff204144f53c00 x22: 0000000000000000 [ 5889.309134] x21: 0000000000000000 x20: ffff204004220080 [ 5889.315520] x19: ffff204144f53c00 x18: 0000000000000000 [ 5889.321897] x17: 0000000000000000 x16: 0000000000000000 [ 5889.328263] x15: 0000004000140ec8 x14: 0000000000000000 [ 5889.334617] x13: 0000000000000000 x12: 00000000010011df [ 5889.340965] x11: bbfeff4d22000000 x10: 0000000000000000 [ 5889.347303] x9 : ffff800009402124 x8 : 0200f78811dfbb4d [ 5889.353637] x7 : 2200000000191b01 x6 : ffff208002a7d480 [ 5889.359959] x5 : 0000000000000000 x4 : 0000000000000000 [ 5889.366271] x3 : 0000000000000000 x2 : 0000000000000000 [ 5889.372567] x1 : 0000000000000000 x0 : ffff20400095c080 [ 5889.378857] Call trace: [ 5889.382285] hclge_ptp_get_rx_hwts+0x40/0x170 [hclge] [ 5889.388304] hns3_handle_bdinfo+0x324/0x410 [hns3] [ 5889.394055] hns3_handle_rx_bd+0x60/0x150 [hns3] [ 5889.399624] hns3_clean_rx_ring+0x84/0x170 [hns3] [ 5889.405270] hns3_nic_common_poll+0xa8/0x220 [hns3] [ 5889.411084] napi_poll+0xcc/0x264 [ 5889.415329] net_rx_action+0xd4/0x21c [ 5889.419911] __do_softirq+0x130/0x358 [ 5889.424484] irq_exit+0x134/0x154 [ 5889.428700] __handle_domain_irq+0x88/0xf0 [ 5889.433684] gic_handle_irq+0x78/0x2c0 [ 5889.438319] el1_irq+0xb8/0x140 [ 5889.442354] arch_cpu_idle+0x18/0x40 [ 5889.446816] default_idle_call+0x5c/0x1c0 [ 5889.451714] cpuidle_idle_call+0x174/0x1b0 [ 5889.456692] do_idle+0xc8/0x160 [ 5889.460717] cpu_startup_entry+0x30/0xfc [ 5889.465523] secondary_start_kernel+0x158/0x1ec [ 5889.470936] Code: 97ffab78 f9411c14 91408294 f9457284 (f9400c80) [ 5889.477950] SMP: stopping secondary CPUs [ 5890.514626] SMP: failed to stop secondary CPUs 0-69,71-95 [ 5890.522951] Starting crashdump kernel... Fixes: 0bf5eb788512 ("net: hns3: add support for PTP") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-08-01 00:24:55 +0000