summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel
AgeCommit message (Collapse)Author
2025-02-11ixgbe: Fix possible skb NULL pointer dereferencePiotr Kwapulinski
The commit c824125cbb18 ("ixgbe: Fix passing 0 to ERR_PTR in ixgbe_run_xdp()") stopped utilizing the ERR-like macros for xdp status encoding. Propagate this logic to the ixgbe_put_rx_buffer(). The commit also relaxed the skb NULL pointer check - caught by Smatch. Restore this check. Fixes: c824125cbb18 ("ixgbe: Fix passing 0 to ERR_PTR in ixgbe_run_xdp()") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/intel-wired-lan/2c7d6c31-192a-4047-bd90-9566d0e14cc0@stanley.mountain/ Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Saritha Sanigani <sarithax.sanigani@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-02-11idpf: call set_real_num_queues in idpf_openJoshua Hay
On initial driver load, alloc_etherdev_mqs is called with whatever max queue values are provided by the control plane. However, if the driver is loaded on a system where num_online_cpus() returns less than the max queues, the netdev will think there are more queues than are actually available. Only num_online_cpus() will be allocated, but skb_get_queue_mapping(skb) could possibly return an index beyond the range of allocated queues. Consequently, the packet is silently dropped and it appears as if TX is broken. Set the real number of queues during open so the netdev knows how many queues will be allocated. Fixes: 1c325aac10a8 ("idpf: configure resources for TX queues") Signed-off-by: Joshua Hay <joshua.a.hay@intel.com> Reviewed-by: Madhu Chittim <madhu.chittim@intel.com> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-02-11idpf: record rx queue in skb for RSC packetsSridhar Samudrala
Move the call to skb_record_rx_queue in idpf_rx_process_skb_fields() so that RX queue is recorded for RSC packets too. Fixes: 90912f9f4f2d ("idpf: convert header split mode to libeth + napi_build_skb()") Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Reviewed-by: Madhu Chittim <madhu.chittim@intel.com> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-02-11idpf: fix handling rsc packet with a single segmentSridhar Samudrala
Handle rsc packet with a single segment same as a multi segment rsc packet so that CHECKSUM_PARTIAL is set in the skb->ip_summed field. The current code is passing CHECKSUM_NONE resulting in TCP GRO layer doing checksum in SW and hiding the issue. This will fail when using dmabufs as payload buffers as skb frag would be unreadable. Fixes: 3a8845af66ed ("idpf: add RX splitq napi poll support") Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-02-10ice: use generic unrolled_count() macroAlexander Lobakin
ice, same as i40e, has a custom loop unrolling macros for unrolling Tx descriptors filling on XSk xmit. Replace ice defs with generic unrolled_count(), which is also more convenient as it allows passing defines as its argument, not hardcoded values, while the loop declaration will still be usual for-loop. Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://patch.msgid.link/20250206182630.3914318-4-aleksander.lobakin@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-10i40e: use generic unrolled_count() macroAlexander Lobakin
i40e, as well as ice, has a custom loop unrolling macro for unrolling Tx descriptors filling on XSk xmit. Replace i40e defs with generic unrolled_count(), which is also more convenient as it allows passing defines as its argument, not hardcoded values, while the loop declaration will still be a usual for-loop. Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://patch.msgid.link/20250206182630.3914318-3-aleksander.lobakin@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-10e1000e: Fix real-time violations on link upGerhard Engleder
Link down and up triggers update of MTA table. This update executes many PCIe writes and a final flush. Thus, PCIe will be blocked until all writes are flushed. As a result, DMA transfers of other targets suffer from delay in the range of 50us. This results in timing violations on real-time systems during link down and up of e1000e in combination with an Intel i3-2310E Sandy Bridge CPU. The i3-2310E is quite old. Launched 2011 by Intel but still in use as robot controller. The exact root cause of the problem is unclear and this situation won't change as Intel support for this CPU has ended years ago. Our experience is that the number of posted PCIe writes needs to be limited at least for real-time systems. With posted PCIe writes a much higher throughput can be generated than with PCIe reads which cannot be posted. Thus, the load on the interconnect is much higher. Additionally, a PCIe read waits until all posted PCIe writes are done. Therefore, the PCIe read can block the CPU for much more than 10us if a lot of PCIe writes were posted before. Both issues are the reason why we are limiting the number of posted PCIe writes in row in general for our real-time systems, not only for this driver. A flush after a low enough number of posted PCIe writes eliminates the delay but also increases the time needed for MTA table update. The following measurements were done on i3-2310E with e1000e for 128 MTA table entries: Single flush after all writes: 106us Flush after every write: 429us Flush after every 2nd write: 266us Flush after every 4th write: 180us Flush after every 8th write: 141us Flush after every 16th write: 121us A flush after every 8th write delays the link up by 35us and the negative impact to DMA transfers of other targets is still tolerable. Execute a flush after every 8th write. This prevents overloading the interconnect with posted writes. Signed-off-by: Gerhard Engleder <eg@keba.com> Link: https://lore.kernel.org/netdev/f8fe665a-5e6c-4f95-b47a-2f3281aa0e6c@lunn.ch/T/ CC: Vitaly Lifshits <vitaly.lifshits@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Avigail Dahan <avigailx.dahan@intel.com> Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-02-10igc: Avoid unnecessary link down event in XDP_SETUP_PROG processSong Yoong Siang
The igc_close()/igc_open() functions are too drastic for installing a new XDP prog because they cause undesirable link down event and device reset. To avoid delays in Ethernet traffic, improve the XDP_SETUP_PROG process by using the same sequence as igc_xdp_setup_pool(), which performs only the necessary steps, as follows: 1. stop the traffic and clean buffer 2. stop NAPI 3. install the XDP program 4. resume NAPI 5. allocate buffer and resume the traffic This patch has been tested using the 'ip link set xdpdrv' command to attach a simple XDP prog that always returns XDP_PASS. Before this patch, attaching xdp program will cause ptp4l to lose sync for few seconds, as shown in ptp4l log below: ptp4l[198.082]: rms 4 max 8 freq +906 +/- 2 delay 12 +/- 0 ptp4l[199.082]: rms 3 max 4 freq +906 +/- 3 delay 12 +/- 0 ptp4l[199.536]: port 1 (enp2s0): link down ptp4l[199.536]: port 1 (enp2s0): SLAVE to FAULTY on FAULT_DETECTED (FT_UNSPECIFIED) ptp4l[199.600]: selected local clock 22abbc.fffe.bb1234 as best master ptp4l[199.600]: port 1 (enp2s0): assuming the grand master role ptp4l[199.600]: port 1 (enp2s0): master state recommended in slave only mode ptp4l[199.600]: port 1 (enp2s0): defaultDS.priority1 probably misconfigured ptp4l[202.266]: port 1 (enp2s0): link up ptp4l[202.300]: port 1 (enp2s0): FAULTY to LISTENING on INIT_COMPLETE ptp4l[205.558]: port 1 (enp2s0): new foreign master 44abbc.fffe.bb2144-1 ptp4l[207.558]: selected best master clock 44abbc.fffe.bb2144 ptp4l[207.559]: port 1 (enp2s0): LISTENING to UNCALIBRATED on RS_SLAVE ptp4l[208.308]: port 1 (enp2s0): UNCALIBRATED to SLAVE on MASTER_CLOCK_SELECTED ptp4l[208.933]: rms 742 max 1303 freq -195 +/- 682 delay 12 +/- 0 ptp4l[209.933]: rms 178 max 274 freq +387 +/- 243 delay 12 +/- 0 After this patch, attaching xdp program no longer cause ptp4l to lose sync, as shown in ptp4l log below: ptp4l[201.183]: rms 1 max 3 freq +959 +/- 1 delay 8 +/- 0 ptp4l[202.183]: rms 1 max 3 freq +961 +/- 2 delay 8 +/- 0 ptp4l[203.183]: rms 2 max 3 freq +958 +/- 2 delay 8 +/- 0 ptp4l[204.183]: rms 3 max 5 freq +961 +/- 3 delay 8 +/- 0 ptp4l[205.183]: rms 2 max 4 freq +964 +/- 3 delay 8 +/- 0 Besides, before this patch, attaching xdp program will causes flood ping to lose 10 packets, as shown in ping statistics below: --- 169.254.1.2 ping statistics --- 100000 packets transmitted, 99990 received, +6 errors, 0.01% packet loss, time 34001ms rtt min/avg/max/mdev = 0.028/0.301/3104.360/13.838 ms, pipe 10, ipg/ewma 0.340/0.243 ms After this patch, attaching xdp program no longer cause flood ping to loss any packets, as shown in ping statistics below: --- 169.254.1.2 ping statistics --- 100000 packets transmitted, 100000 received, 0% packet loss, time 32326ms rtt min/avg/max/mdev = 0.027/0.231/19.589/0.155 ms, pipe 2, ipg/ewma 0.323/0.322 ms On the other hand, this patch has been tested with tools/testing/selftests/ bpf/xdp_hw_metadata app to make sure AF_XDP zero-copy is working fine with XDP Tx and Rx metadata. Below is the result of last packet after received 10000 UDP packets with interval 1 ms: poll: 1 (0) skip=0 fail=0 redir=10000 xsk_ring_cons__peek: 1 0x55881c7ef7a8: rx_desc[9999]->addr=8f110 addr=8f110 comp_addr=8f110 EoP rx_hash: 0xFB9BB6A3 with RSS type:0x1 HW RX-time: 1733923136269470866 (sec:1733923136.2695) delta to User RX-time sec:0.0000 (43.280 usec) XDP RX-time: 1733923136269482482 (sec:1733923136.2695) delta to User RX-time sec:0.0000 (31.664 usec) No rx_vlan_tci or rx_vlan_proto, err=-95 0x55881c7ef7a8: ping-pong with csum=ab19 (want 315b) csum_start=34 csum_offset=6 0x55881c7ef7a8: complete tx idx=9999 addr=f010 HW TX-complete-time: 1733923136269591637 (sec:1733923136.2696) delta to User TX-complete-time sec:0.0001 (108.571 usec) XDP RX-time: 1733923136269482482 (sec:1733923136.2695) delta to User TX-complete-time sec:0.0002 (217.726 usec) HW RX-time: 1733923136269470866 (sec:1733923136.2695) delta to HW TX-complete-time sec:0.0001 (120.771 usec) 0x55881c7ef7a8: complete rx idx=10127 addr=8f110 Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com> Tested-by: Avigail Dahan <avigailx.dahan@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-02-10ice: refactor ice_fdir_create_dflt_rules() functionMateusz Polchlopek
The Flow Director function ice_fdir_create_dflt_rules() calls few times function ice_create_init_fdir_rule() each time with different enum ice_fltr_ptype parameter. Next step is to return error code if error occurred. Change the code to store all necessary default rules in constant array and call ice_create_init_fdir_rule() in the loop. It makes it easy to extend the list of default rules in the future, without the need of duplicate code more and more. Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-02-10ice: Implement PTP support for E830 devicesMichal Michalik
Add specific functions and definitions for E830 devices to enable PTP support. E830 devices support direct write to GLTSYN_ registers without shadow registers and 64 bit read of PHC time. Enable PTM for E830 device, which is required for cross timestamp and and dependency on PCIE_PTM for ICE_HWTS. Check X86_FEATURE_ART for E830 as it may not be present in the CPU. Cc: Anna-Maria Behnsen <anna-maria@linutronix.de> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Co-developed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Co-developed-by: Milena Olech <milena.olech@intel.com> Signed-off-by: Milena Olech <milena.olech@intel.com> Co-developed-by: Paul Greenwalt <paul.greenwalt@intel.com> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Signed-off-by: Michal Michalik <michal.michalik@intel.com> Co-developed-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-02-10ice: Refactor ice_ptp_init_tx_*Karol Kolacinski
Unify ice_ptp_init_tx_* functions for most of the MAC types except E82X. This simplifies the code for the future use with new MAC types. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-02-10ice: Add unified ice_capture_crosststampJacob Keller
Devices supported by ice driver use essentially the same logic for performing a crosstimestamp. The only difference is that E830 hardware has different offsets. Instead of having multiple implementations, combine them into a single ice_capture_crosststamp() function. To support both hardware types, the ice_capture_crosststamp function must be able to determine the appropriate registers to access. To handle this, pass a custom context structure instead of the PF pointer. This structure, ice_crosststamp_ctx, contains a pointer to the PF, and a pointer to the device configuration structure. This new structure also will make it easier to implement historic snapshot support in a future commit. The device configuration structure is a static const data which defines the offsets and flags for the various registers. This includes the lock register, the cross timestamp control register, the upper and lower ART system time capture registers, and the upper and lower device time capture registers for each timer index. Use the configuration structure to access all of the registers in ice_capture_crosststamp(). Ensure that we don't over-run the device time array by checking that the timer index is 0 or 1. Previously this was simply assumed, and it would cause the device to read an incorrect and likely garbage register. It does feel like there should be a kernel interface for managing register offsets like this, but the closest thing I saw was <linux/regmap.h> which is interesting but not quite what we're looking for... Use rd32_poll_timeout() to read lock_reg and ctl_reg. Add snapshot system time for historic interpolation. Remove X86_FEATURE_ART and X86_FEATURE_TSC_KNOWN_FREQ from all E82X devices because those are SoCs, which will always have those features. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-02-10ice: Process TSYN IRQ in a separate functionKarol Kolacinski
Simplify TSYN IRQ processing by moving it to a separate function and having appropriate behavior per PHY model, instead of multiple conditions not related to HW, but to specific timestamping modes. When PTP is not enabled in the kernel, don't process timestamps and return IRQ_HANDLED. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-02-10ice: Use FIELD_PREP for timestamp valuesKarol Kolacinski
Instead of using shifts and casts, use FIELD_PREP after reading 40b timestamp values. Rename a couple defines for better clarity and consistency. Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-02-10ice: Remove unnecessary ice_is_e8xx() functionsKarol Kolacinski
Remove unnecessary ice_is_e8xx() functions and PHY model. Instead, use MAC type where applicable. Don't check device type in ice_ptp_maybe_trigger_tx_interrupt(), because in reality it depends on the ready bitmap, which only E810 does not have. Call ice_ptp_cfg_phy_interrupt() unconditionally, because all further function calls check the MAC type anyway and this allows simpler code in the future with addition of the new MAC types. Reorder ICE_MAC_* cases in switches in ice_ptp* as in enum ice_mac_type. Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-02-10ice: Don't check device type when checking GNSS presenceKarol Kolacinski
Don't check if the device type is E810T as non-E810T devices can support GNSS too and PCA9575 check is enough to determine if GNSS is present or not. Rename ice_gnss_is_gps_present() to ice_gnss_is_module_present() because GNSS module supports multiple GNSS providers, not only GPS. Move functions related to PCA9575 from ice_ptp_hw.c to ice_common.c to be able to access them when PTP is disabled in the kernel, but GNSS is enabled. Remove logical AND with ICE_AQC_LINK_TOPO_NODE_TYPE_M in ice_get_pca9575_handle(), which has no effect, and reorder device type checks to check the device_id first, then set other variables. Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-02-06Merge branch 'for-next' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== ice: managing MSI-X in driver Michal Swiatkowski says: It is another try to allow user to manage amount of MSI-X used for each feature in ice. First was via devlink resources API, it wasn't accepted in upstream. Also static MSI-X allocation using devlink resources isn't really user friendly. This try is using more dynamic way. "Dynamic" across whole kernel when platform supports it and "dynamic" across the driver when not. To achieve that reuse global devlink parameter pf_msix_max and pf_msix_min. It fits how ice hardware counts MSI-X. In case of ice amount of MSI-X reported on PCI is a whole MSI-X for the card (with MSI-X for VFs also). Having pf_msix_max allow user to statically set how many MSI-X he wants on PF and how many should be reserved for VFs. pf_msix_min is used to set minimum number of MSI-X with which ice driver should probe correctly. Meaning of this field in case of dynamic vs static allocation: - on system with dynamic MSI-X allocation support * alloc pf_msix_min as static, rest will be allocated dynamically - on system without dynamic MSI-X allocation support * try alloc pf_msix_max as static, minimum acceptable result is pf_msix_min As Jesse and Piotr suggested pf_msix_max and pf_msix_min can (an probably should) be stored in NVM. This patchset isn't implementing that. Dynamic (kernel or driver) way means that splitting MSI-X across the RDMA and eth in case there is a MSI-X shortage isn't correct. Can work when dynamic is only on driver site, but can't when dynamic is on kernel site. Let's remove this code and move to MSI-X allocation feature by feature. If there is no more MSI-X for a feature, a feature is working with less MSI-X or it is turned off. There is a regression here. With MSI-X splitting user can run RDMA and eth even on system with not enough MSI-X. Now only eth will work. RDMA can be turned on by changing number of PF queues (lowering) and reprobe RDMA driver. Example: 72 CPU number, eth, RDMA and flow director (1 MSI-X), 1 MSI-X for OICR on PF, and 1 more for RDMA. Card is using 1 + 72 + 1 + 72 + 1 = 147. We set pf_msix_min = 2, pf_msix_max = 128 OICR: 1 eth: 72 flow director: 1 RDMA: 128 - 74 = 54 We can change number of queues on pf to 36 and do devlink reinit OICR: 1 eth: 36 RDMA: 73 flow director: 1 We can also (implemented in "ice: enable_rdma devlink param") turned RDMA off. OICR: 1 eth: 72 RDMA: 0 (turned off) flow director: 1 After this changes we have a static base vector for SRIOV (SIOV probably in the feature). Last patch from this series is simplifying managing VF MSI-X code based on static vector. Now changing queues using ethtool is also changing MSI-X. If there is enough MSI-X it is always one to one. When there is not enough there will be more queues than MSI-X. * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: init flow director before RDMA ice: simplify VF MSI-X managing ice: enable_rdma devlink param ice: treat dyn_allowed only as suggestion ice, irdma: move interrupts code to irdma ice: get rid of num_lan_msix field ice: remove splitting MSI-X between features ice: devlink PF MSI-X max and min parameter ice: count combined queues using Rx/Tx count ==================== Link: https://patch.msgid.link/20250205185512.895887-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-05ice: init flow director before RDMAMichal Swiatkowski
Flow director needs only one MSI-X. Load it before RDMA to save MSI-X for it. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-02-05ice: simplify VF MSI-X managingMichal Swiatkowski
After implementing pf->msix.max field, base vector for other use cases (like VFs) can be fixed. This simplify code when changing MSI-X amount on particular VF, because there is no need to move a base vector. A fixed base vector allows to reserve vectors from the beginning instead of from the end, which is also simpler in code. Store total and rest value in the same struct as max and min for PF. Move tracking vectors from ice_sriov.c to ice_irq.c as it can be also use for other none PF use cases (SIOV). Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-02-05ice: enable_rdma devlink paramMichal Swiatkowski
Implement enable_rdma devlink parameter to allow user to turn RDMA feature on and off. It is useful when there is no enough interrupts and user doesn't need RDMA feature. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jan Sokolowski <jan.sokolowski@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-02-05ice: treat dyn_allowed only as suggestionMichal Swiatkowski
It can be needed to have some MSI-X allocated as static and rest as dynamic. For example on PF VSI. We want to always have minimum one MSI-X on it, because of that it is allocated as a static one, rest can be dynamic if it is supported. Change the ice_get_irq_res() to allow using static entries if they are free even if caller wants dynamic one. Adjust limit values to the new approach. Min and max in limit means the values that are valid, so decrease max and num_static by one. Set vsi::irq_dyn_alloc if dynamic allocation is supported. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-02-05ice, irdma: move interrupts code to irdmaMichal Swiatkowski
Move responsibility of MSI-X requesting for RDMA feature from ice driver to irdma driver. It is done to allow simple fallback when there is not enough MSI-X available. Change amount of MSI-X used for control from 4 to 1, as it isn't needed to have more than one MSI-X for this purpose. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-02-05ice: get rid of num_lan_msix fieldMichal Swiatkowski
Remove the field to allow having more queues than MSI-X on VSI. As default the number will be the same, but if there won't be more MSI-X available VSI can run with at least one MSI-X. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-02-05ice: remove splitting MSI-X between featuresMichal Swiatkowski
With dynamic approach to alloc MSI-X there is no sense to statically split MSI-X between PF features. Splitting was also calculating needed MSI-X. Move this part to separate function and use as max value. Remove ICE_ESWITCH_MSIX, as there is no need for additional MSI-X for switchdev. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-02-05ice: devlink PF MSI-X max and min parameterMichal Swiatkowski
Use generic devlink PF MSI-X parameter to allow user to change MSI-X range. Add notes about this parameters into ice devlink documentation. Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-02-04ice: count combined queues using Rx/Tx countMichal Swiatkowski
Previous implementation assumes that there is 1:1 matching between vectors and queues. It isn't always true. Get minimum value from Rx/Tx queues to determine combined queues number. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-02-03Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== ice: fix Rx data path for heavy 9k MTU traffic Maciej Fijalkowski says: This patchset fixes a pretty nasty issue that was reported by RedHat folks which occurred after ~30 minutes (this value varied, just trying here to state that it was not observed immediately but rather after a considerable longer amount of time) when ice driver was tortured with jumbo frames via mix of iperf traffic executed simultaneously with wrk/nginx on client/server sides (HTTP and TCP workloads basically). The reported splats were spanning across all the bad things that can happen to the state of page - refcount underflow, use-after-free, etc. One of these looked as follows: [ 2084.019891] BUG: Bad page state in process swapper/34 pfn:97fcd0 [ 2084.025990] page:00000000a60ee772 refcount:-1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x97fcd0 [ 2084.035462] flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff) [ 2084.041990] raw: 0017ffffc0000000 dead000000000100 dead000000000122 0000000000000000 [ 2084.049730] raw: 0000000000000000 0000000000000000 ffffffffffffffff 0000000000000000 [ 2084.057468] page dumped because: nonzero _refcount [ 2084.062260] Modules linked in: bonding tls sunrpc intel_rapl_msr intel_rapl_common intel_uncore_frequency intel_uncore_frequency_common i10nm_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm mgag200 irqd [ 2084.137829] CPU: 34 PID: 0 Comm: swapper/34 Kdump: loaded Not tainted 5.14.0-427.37.1.el9_4.x86_64 #1 [ 2084.147039] Hardware name: Dell Inc. PowerEdge R750/0216NK, BIOS 1.13.2 12/19/2023 [ 2084.154604] Call Trace: [ 2084.157058] <IRQ> [ 2084.159080] dump_stack_lvl+0x34/0x48 [ 2084.162752] bad_page.cold+0x63/0x94 [ 2084.166333] check_new_pages+0xb3/0xe0 [ 2084.170083] rmqueue_bulk+0x2d2/0x9e0 [ 2084.173749] ? ktime_get+0x35/0xa0 [ 2084.177159] rmqueue_pcplist+0x13b/0x210 [ 2084.181081] rmqueue+0x7d3/0xd40 [ 2084.184316] ? xas_load+0x9/0xa0 [ 2084.187547] ? xas_find+0x183/0x1d0 [ 2084.191041] ? xa_find_after+0xd0/0x130 [ 2084.194879] ? intel_iommu_iotlb_sync_map+0x89/0xe0 [ 2084.199759] get_page_from_freelist+0x11f/0x530 [ 2084.204291] __alloc_pages+0xf2/0x250 [ 2084.207958] ice_alloc_rx_bufs+0xcc/0x1c0 [ice] [ 2084.212543] ice_clean_rx_irq+0x631/0xa20 [ice] [ 2084.217111] ice_napi_poll+0xdf/0x2a0 [ice] [ 2084.221330] __napi_poll+0x27/0x170 [ 2084.224824] net_rx_action+0x233/0x2f0 [ 2084.228575] __do_softirq+0xc7/0x2ac [ 2084.232155] __irq_exit_rcu+0xa1/0xc0 [ 2084.235821] common_interrupt+0x80/0xa0 [ 2084.239662] </IRQ> [ 2084.241768] <TASK> The fix is mostly about reverting what was done in commit 1dc1a7e7f410 ("ice: Centrallize Rx buffer recycling") followed by proper timing on page_count() storage and then removing the ice_rx_buf::act related logic (which was mostly introduced for purposes from cited commit). Special thanks to Xu Du for providing reproducer and Jacob Keller for initial extensive analysis. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: stop storing XDP verdict within ice_rx_buf ice: gather page_count()'s of each frag right before XDP prog call ice: put Rx buffers after being done with current frame ==================== Link: https://patch.msgid.link/20250131185415.3741532-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-01ice: Add check for devm_kzalloc()Jiasheng Jiang
Add check for the return value of devm_kzalloc() to guarantee the success of allocation. Fixes: 42c2eb6b1f43 ("ice: Implement devlink-rate API") Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250131013832.24805-1-jiashengjiangcool@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-31ice: stop storing XDP verdict within ice_rx_bufMaciej Fijalkowski
Idea behind having ice_rx_buf::act was to simplify and speed up the Rx data path by walking through buffers that were representing cleaned HW Rx descriptors. Since it caused us a major headache recently and we rolled back to old approach that 'puts' Rx buffers right after running XDP prog/creating skb, this is useless now and should be removed. Get rid of ice_rx_buf::act and related logic. We still need to take care of a corner case where XDP program releases a particular fragment. Make ice_run_xdp() to return its result and use it within ice_put_rx_mbuf(). Fixes: 2fba7dc5157b ("ice: Add support for XDP multi-buffer on Rx side") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-31ice: gather page_count()'s of each frag right before XDP prog callMaciej Fijalkowski
If we store the pgcnt on few fragments while being in the middle of gathering the whole frame and we stumbled upon DD bit not being set, we terminate the NAPI Rx processing loop and come back later on. Then on next NAPI execution we work on previously stored pgcnt. Imagine that second half of page was used actively by networking stack and by the time we came back, stack is not busy with this page anymore and decremented the refcnt. The page reuse algorithm in this case should be good to reuse the page but given the old refcnt it will not do so and attempt to release the page via page_frag_cache_drain() with pagecnt_bias used as an arg. This in turn will result in negative refcnt on struct page, which was initially observed by Xu Du. Therefore, move the page count storage from ice_get_rx_buf() to a place where we are sure that whole frame has been collected, but before calling XDP program as it internally can also change the page count of fragments belonging to xdp_buff. Fixes: ac0753391195 ("ice: Store page count inside ice_rx_buf") Reported-and-tested-by: Xu Du <xudu@redhat.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Co-developed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-31ice: put Rx buffers after being done with current frameMaciej Fijalkowski
Introduce a new helper ice_put_rx_mbuf() that will go through gathered frags from current frame and will call ice_put_rx_buf() on them. Current logic that was supposed to simplify and optimize the driver where we go through a batch of all buffers processed in current NAPI instance turned out to be broken for jumbo frames and very heavy load that was coming from both multi-thread iperf and nginx/wrk pair between server and client. The delay introduced by approach that we are dropping is simply too big and we need to take the decision regarding page recycling/releasing as quick as we can. While at it, address an error path of ice_add_xdp_frag() - we were missing buffer putting from day 1 there. As a nice side effect we get rid of annoying and repetitive three-liner: xdp->data = NULL; rx_ring->first_desc = ntc; rx_ring->nr_frags = 0; by embedding it within introduced routine. Fixes: 1dc1a7e7f410 ("ice: Centrallize Rx buffer recycling") Reported-and-tested-by: Xu Du <xudu@redhat.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Co-developed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-24iavf: allow changing VLAN state without calling PFMichal Swiatkowski
First case: > ip l a l $VF name vlanx type vlan id 100 > ip l d vlanx > ip l a l $VF name vlanx type vlan id 100 As workqueue can be execute after sometime, there is a window to have call trace like that: - iavf_del_vlan - iavf_add_vlan - iavf_del_vlans (wq) It means that our VLAN 100 will change the state from IAVF_VLAN_ACTIVE to IAVF_VLAN_REMOVE (iavf_del_vlan). After that in iavf_add_vlan state won't be changed because VLAN 100 is on the filter list. The final result is that the VLAN 100 filter isn't added in hardware (no iavf_add_vlans call). To fix that change the state if the filter wasn't removed yet directly to active. It is save as IAVF_VLAN_REMOVE means that virtchnl message wasn't sent yet. Second case: > ip l a l $VF name vlanx type vlan id 100 Any type of VF reset ex. change trust > ip l s $PF vf $VF_NUM trust on > ip l d vlanx > ip l a l $VF name vlanx type vlan id 100 In case of reset iavf driver is responsible for readding all filters that are being used. To do that all VLAN filters state are changed to IAVF_VLAN_ADD. Here is even longer window for changing VLAN state from kernel side, as workqueue isn't called immediately. We can have call trace like that: - changing to IAVF_VLAN_ADD (after reset) - iavf_del_vlan (called from kernel ops) - iavf_del_vlans (wq) Not exsisitng VLAN filters will be removed from hardware. It isn't a bug, ice driver will handle it fine. However, we can have call trace like that: - changing to IAVF_VLAN_ADD (after reset) - iavf_del_vlan (called from kernel ops) - iavf_add_vlan (called from kernel ops) - iavf_del_vlans (wq) With fix for previous case we end up with no VLAN filters in hardware. We have to remove VLAN filters if the state is IAVF_VLAN_ADD and delete VLAN was called. It is save as IAVF_VLAN_ADD means that virtchnl message wasn't sent yet. Fixes: 0c0da0e95105 ("iavf: refactor VLAN filter states") Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-24ice: remove invalid parameter of equalizerMateusz Polchlopek
It occurred that in the commit 70838938e89c ("ice: Implement driver functionality to dump serdes equalizer values") the invalid DRATE parameter for reading has been added. The output of the command: $ ethtool -d <ethX> returns the garbage value in the place where DRATE value should be stored. Remove mentioned parameter to prevent return of corrupted data to userspace. Fixes: 70838938e89c ("ice: Implement driver functionality to dump serdes equalizer values") Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-24ice: fix ice_parser_rt::bst_key array sizePrzemek Kitszel
Fix &ice_parser_rt::bst_key size. It was wrongly set to 10 instead of 20 in the initial impl commit (see Fixes tag). All usage code assumed it was of size 20. That was also the initial size present up to v2 of the intro series [2], but halved by v3 [3] refactor described as "Replace magic hardcoded values with macros." The introducing series was so big that some ugliness was unnoticed, same for bugs :/ ICE_BST_KEY_TCAM_SIZE and ICE_BST_TCAM_KEY_SIZE were differing by one. There was tmp variable @j in the scope of edited function, but was not used in all places. This ugliness is now gone. I'm moving ice_parser_rt::pg_prio a few positions up, to fill up one of the holes in order to compensate for the added 10 bytes to the ::bst_key, resulting in the same size of the whole as prior to the fix, and minimal changes in the offsets of the fields. Extend also the debug dump print of the key to cover all bytes. To not have string with 20 "%02x" and 20 params, switch to ice_debug_array_w_prefix(). This fix obsoletes Ahmed's attempt at [1]. [1] https://lore.kernel.org/intel-wired-lan/20240823230847.172295-1-ahmed.zaki@intel.com [2] https://lore.kernel.org/intel-wired-lan/20230605054641.2865142-13-junfeng.guo@intel.com [3] https://lore.kernel.org/intel-wired-lan/20230817093442.2576997-13-junfeng.guo@intel.com Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/intel-wired-lan/b1fb6ff9-b69e-4026-9988-3c783d86c2e0@stanley.mountain Fixes: 9a4c07aaa0f5 ("ice: add parser execution main loop") CC: Ahmed Zaki <ahmed.zaki@intel.com> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-24idpf: add more info during virtchnl transaction timeout/salt mismatchManoj Vishwanathan
Add more information related to the transaction like cookie, vc_op, salt when transaction times out and include similar information when transaction salt does not match. Info output for transaction timeout: ------------------- (op:5015 cookie:45fe vc_op:5015 salt:45 timeout:60000ms) ------------------- before it was: ------------------- (op 5015, 60000ms) ------------------- Signed-off-by: Manoj Vishwanathan <manojvishy@google.com> Signed-off-by: Brian Vazquez <brianvv@google.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-24idpf: convert workqueues to unboundMarco Leogrande
When a workqueue is created with `WQ_UNBOUND`, its work items are served by special worker-pools, whose host workers are not bound to any specific CPU. In the default configuration (i.e. when `queue_delayed_work` and friends do not specify which CPU to run the work item on), `WQ_UNBOUND` allows the work item to be executed on any CPU in the same node of the CPU it was enqueued on. While this solution potentially sacrifices locality, it avoids contention with other processes that might dominate the CPU time of the processor the work item was scheduled on. This is not just a theoretical problem: in a particular scenario misconfigured process was hogging most of the time from CPU0, leaving less than 0.5% of its CPU time to the kworker. The IDPF workqueues that were using the kworker on CPU0 suffered large completion delays as a result, causing performance degradation, timeouts and eventual system crash. Tested: * I have also run a manual test to gauge the performance improvement. The test consists of an antagonist process (`./stress --cpu 2`) consuming as much of CPU 0 as possible. This process is run under `taskset 01` to bind it to CPU0, and its priority is changed with `chrt -pQ 9900 10000 ${pid}` and `renice -n -20 ${pid}` after start. Then, the IDPF driver is forced to prefer CPU0 by editing all calls to `queue_delayed_work`, `mod_delayed_work`, etc... to use CPU 0. Finally, `ktraces` for the workqueue events are collected. Without the current patch, the antagonist process can force arbitrary delays between `workqueue_queue_work` and `workqueue_execute_start`, that in my tests were as high as `30ms`. With the current patch applied, the workqueue can be migrated to another unloaded CPU in the same node, and, keeping everything else equal, the maximum delay I could see was `6us`. Fixes: 0fe45467a104 ("idpf: add create vport and netdev configuration") Signed-off-by: Marco Leogrande <leogrande@google.com> Signed-off-by: Manoj Vishwanathan <manojvishy@google.com> Signed-off-by: Brian Vazquez <brianvv@google.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-24idpf: Acquire the lock before accessing the xn->saltManoj Vishwanathan
The transaction salt was being accessed before acquiring the idpf_vc_xn_lock when idpf has to forward the virtchnl reply. Fixes: 34c21fa894a1 ("idpf: implement virtchnl transaction manager") Signed-off-by: Manoj Vishwanathan <manojvishy@google.com> Signed-off-by: David Decotigny <decot@google.com> Signed-off-by: Brian Vazquez <brianvv@google.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-24idpf: fix transaction timeouts on resetEmil Tantilov
Restore the call to idpf_vc_xn_shutdown() at the beginning of idpf_vc_core_deinit() provided the function is not called on remove. In the reset path the mailbox is destroyed, leading to all transactions timing out. Fixes: 09d0fb5cb30e ("idpf: deinit virtchnl transaction manager after vport and vectors") Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-24idpf: add read memory barrier when checking descriptor done bitEmil Tantilov
Add read memory barrier to ensure the order of operations when accessing control queue descriptors. Specifically, we want to avoid cases where loads can be reordered: 1. Load #1 is dispatched to read descriptor flags. 2. Load #2 is dispatched to read some other field from the descriptor. 3. Load #2 completes, accessing memory/cache at a point in time when the DD flag is zero. 4. NIC DMA overwrites the descriptor, now the DD flag is one. 5. Any fields loaded before step 4 are now inconsistent with the actual descriptor state. Add read memory barrier between steps 1 and 2, so that load #2 is not executed until load #1 has completed. Fixes: 8077c727561a ("idpf: add controlq init and reset checks") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Suggested-by: Lance Richardson <rlance@google.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-22Merge tag 'net-next-6.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "This is slightly smaller than usual, with the most interesting work being still around RTNL scope reduction. Core: - More core refactoring to reduce the RTNL lock contention, including preparatory work for the per-network namespace RTNL lock, replacing RTNL lock with a per device-one to protect NAPI-related net device data and moving synchronize_net() calls outside such lock. - Extend drop reasons usage, adding net scheduler, AF_UNIX, bridge and more specific TCP coverage. - Reduce network namespace tear-down time by removing per-subsystems synchronize_net() in tipc and sched. - Add flow label selector support for fib rules, allowing traffic redirection based on such header field. Netfilter: - Do not remove netdev basechain when last device is gone, allowing netdev basechains without devices. - Revisit the flowtable teardown strategy, dealing better with fin, reset and re-open events. - Scale-up IP-vs connection dumping by avoiding linear search on each restart. Protocols: - A significant XDP socket refactor, consolidating and optimizing several helpers into the core - Better scaling of ICMP rate-limiting, by removing false-sharing in inet peers handling. - Introduces netlink notifications for multicast IPv4 and IPv6 address changes. - Add ipsec support for IP-TFS/AggFrag encapsulation, allowing aggregation and fragmentation of the inner IP. - Add sysctl to configure TIME-WAIT reuse delay for TCP sockets, to avoid local port exhaustion issues when the average connection lifetime is very short. - Support updating keys (re-keying) for connections using kernel TLS (for TLS 1.3 only). - Support ipv4-mapped ipv6 address clients in smc-r v2. - Add support for jumbo data packet transmission in RxRPC sockets, gluing multiple data packets in a single UDP packet. - Support RxRPC RACK-TLP to manage packet loss and retransmission in conjunction with the congestion control algorithm. Driver API: - Introduce a unified and structured interface for reporting PHY statistics, exposing consistent data across different H/W via ethtool. - Make timestamping selectable, allow the user to select the desired hwtstamp provider (PHY or MAC) administratively. - Add support for configuring a header-data-split threshold (HDS) value via ethtool, to deal with partial or buggy H/W implementation. - Consolidate DSA drivers Energy Efficiency Ethernet support. - Add EEE management to phylink, making use of the phylib implementation. - Add phylib support for in-band capabilities negotiation. - Simplify how phylib-enabled mac drivers expose the supported interfaces. Tests and tooling: - Make the YNL tool package-friendly to make it easier to deploy it separately from the kernel. - Increase TCP selftest coverage importing several packetdrill test-cases. - Regenerate the ethtool uapi header from the YNL spec, to ease maintenance and future development. - Add YNL support for decoding the link types used in net self-tests, allowing a single build to run both net and drivers/net. Drivers: - Ethernet high-speed NICs: - nVidia/Mellanox (mlx5): - add cross E-Switch QoS support - add SW Steering support for ConnectX-8 - implement support for HW-Managed Flow Steering, improving the rule deletion/insertion rate - support for multi-host LAG - Intel (ixgbe, ice, igb): - ice: add support for devlink health events - ixgbe: add initial support for E610 chipset variant - igb: add support for AF_XDP zero-copy - Meta: - add support for basic RSS config - allow changing the number of channels - add hardware monitoring support - Broadcom (bnxt): - implement TCP data split and HDS threshold ethtool support, enabling Device Memory TCP. - Marvell Octeon: - implement egress ipsec offload support for the cn10k family - Hisilicon (HIBMC): - implement unicast MAC filtering - Ethernet NICs embedded and virtual: - Convert UDP tunnel drivers to NETDEV_PCPU_STAT_DSTATS, avoiding contented atomic operations for drop counters - Freescale: - quicc: phylink conversion - enetc: support Tx and Rx checksum offload and improve TSO performances - MediaTek: - airoha: introduce support for ETS and HTB Qdisc offload - Microchip: - lan78XX USB: preparation work for phylink conversion - Synopsys (stmmac): - support DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45 - refactor EEE support to leverage the new driver API - optimize DMA and cache access to increase raw RX performances by 40% - TI: - icssg-prueth: add multicast filtering support for VLAN interface - netkit: - add ability to configure head/tailroom - VXLAN: - accepts packets with user-defined reserved bit - Ethernet switches: - Microchip: - lan969x: add RGMII support - lan969x: improve TX and RX performance using the FDMA engine - nVidia/Mellanox: - move Tx header handling to PCI driver, to ease XDP support - Ethernet PHYs: - Texas Instruments DP83822: - add support for GPIO2 clock output - Realtek: - 8169: add support for RTL8125D rev.b - rtl822x: add hwmon support for the temperature sensor - Microchip: - add support for RDS PTP hardware - consolidate periodic output signal generation - CAN: - several DT-bindings to DT schema conversions - tcan4x5x: - add HW standby support - support nWKRQ voltage selection - kvaser: - allowing Bus Error Reporting runtime configuration - WiFi: - the on-going Multi-Link Operation (MLO) effort continues, affecting both the stack and in drivers - mac80211/cfg80211: - Emergency Preparedness Communication Services (EPCS) station mode support - support for adding and removing station links for MLO - add support for WiFi 7/EHT mesh over 320 MHz channels - report Tx power info for each link - RealTek (rtw88): - enable USB Rx aggregation and USB 3 to improve performance - LED support - RealTek (rtw89): - refactor power save to support Multi-Link Operations - add support for RTL8922AE-VS variant - MediaTek (mt76): - single wiphy multiband support (preparation for MLO) - p2p device support - add TP-Link TXE50UH USB adapter support - Qualcomm (ath10k): - support for the QCA6698AQ IP core - Qualcomm (ath12k): - enable MLO for QCN9274 - Bluetooth: - Allow sysfs to trigger hdev reset, to allow recovering devices not responsive from user-space - MediaTek: add support for MT7922, MT7925, MT7921e devices - Realtek: add support for RTL8851BE devices - Qualcomm: add support for WCN785x devices - ISO: allow BIG re-sync" * tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1386 commits) net/rose: prevent integer overflows in rose_setsockopt() net: phylink: fix regression when binding a PHY net: ethernet: ti: am65-cpsw: streamline TX queue creation and cleanup net: ethernet: ti: am65-cpsw: streamline RX queue creation and cleanup net: ethernet: ti: am65-cpsw: ensure proper channel cleanup in error path ipv6: Convert inet6_rtm_deladdr() to per-netns RTNL. ipv6: Convert inet6_rtm_newaddr() to per-netns RTNL. ipv6: Move lifetime validation to inet6_rtm_newaddr(). ipv6: Set cfg.ifa_flags before device lookup in inet6_rtm_newaddr(). ipv6: Pass dev to inet6_addr_add(). ipv6: Convert inet6_ioctl() to per-netns RTNL. ipv6: Hold rtnl_net_lock() in addrconf_init() and addrconf_cleanup(). ipv6: Hold rtnl_net_lock() in addrconf_dad_work(). ipv6: Hold rtnl_net_lock() in addrconf_verify_work(). ipv6: Convert net.ipv6.conf.${DEV}.XXX sysctl to per-netns RTNL. ipv6: Add __in6_dev_get_rtnl_net(). net: stmmac: Drop redundant skb_mark_for_recycle() for SKB frags net: mii: Fix the Speed display when the network cable is not connected sysctl net: Remove macro checks for CONFIG_SYSCTL eth: bnxt: update header sizing defaults ...
2025-01-21Merge tag 'kthread-for-6.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks Pull kthread updates from Frederic Weisbecker: "Kthreads affinity follow either of 4 existing different patterns: 1) Per-CPU kthreads must stay affine to a single CPU and never execute relevant code on any other CPU. This is currently handled by smpboot code which takes care of CPU-hotplug operations. Affinity here is a correctness constraint. 2) Some kthreads _have_ to be affine to a specific set of CPUs and can't run anywhere else. The affinity is set through kthread_bind_mask() and the subsystem takes care by itself to handle CPU-hotplug operations. Affinity here is assumed to be a correctness constraint. 3) Per-node kthreads _prefer_ to be affine to a specific NUMA node. This is not a correctness constraint but merely a preference in terms of memory locality. kswapd and kcompactd both fall into this category. The affinity is set manually like for any other task and CPU-hotplug is supposed to be handled by the relevant subsystem so that the task is properly reaffined whenever a given CPU from the node comes up. Also care should be taken so that the node affinity doesn't cross isolated (nohz_full) cpumask boundaries. 4) Similar to the previous point except kthreads have a _preferred_ affinity different than a node. Both RCU boost kthreads and RCU exp kworkers fall into this category as they refer to "RCU nodes" from a distinctly distributed tree. Currently the preferred affinity patterns (3 and 4) have at least 4 identified users, with more or less success when it comes to handle CPU-hotplug operations and CPU isolation. Each of which do it in its own ad-hoc way. This is an infrastructure proposal to handle this with the following API changes: - kthread_create_on_node() automatically affines the created kthread to its target node unless it has been set as per-cpu or bound with kthread_bind[_mask]() before the first wake-up. - kthread_affine_preferred() is a new function that can be called right after kthread_create_on_node() to specify a preferred affinity different than the specified node. When the preferred affinity can't be applied because the possible targets are offline or isolated (nohz_full), the kthread is affine to the housekeeping CPUs (which means to all online CPUs most of the time or only the non-nohz_full CPUs when nohz_full= is set). kswapd, kcompactd, RCU boost kthreads and RCU exp kworkers have been converted, along with a few old drivers. Summary of the changes: - Consolidate a bunch of ad-hoc implementations of kthread_run_on_cpu() - Introduce task_cpu_fallback_mask() that defines the default last resort affinity of a task to become nohz_full aware - Add some correctness check to ensure kthread_bind() is always called before the first kthread wake up. - Default affine kthread to its preferred node. - Convert kswapd / kcompactd and remove their halfway working ad-hoc affinity implementation - Implement kthreads preferred affinity - Unify kthread worker and kthread API's style - Convert RCU kthreads to the new API and remove the ad-hoc affinity implementation" * tag 'kthread-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks: kthread: modify kernel-doc function name to match code rcu: Use kthread preferred affinity for RCU exp kworkers treewide: Introduce kthread_run_worker[_on_cpu]() kthread: Unify kthread_create_on_cpu() and kthread_create_worker_on_cpu() automatic format rcu: Use kthread preferred affinity for RCU boost kthread: Implement preferred affinity mm: Create/affine kswapd to its preferred node mm: Create/affine kcompactd to its preferred node kthread: Default affine kthread to its preferred NUMA node kthread: Make sure kthread hasn't started while binding it sched,arm64: Handle CPU isolation on last resort fallback rq selection arm64: Exclude nohz_full CPUs from 32bits el0 support lib: test_objpool: Use kthread_run_on_cpu() kallsyms: Use kthread_run_on_cpu() soc/qman: test: Use kthread_run_on_cpu() arm/bL_switcher: Use kthread_run_on_cpu()
2025-01-17Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== ice: support FW Recovery Mode Konrad Knitter says: Enable update of card in FW Recovery Mode * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: support FW Recovery Mode devlink: add devl guard pldmfw: enable selected component update ==================== Link: https://patch.msgid.link/20250116212059.1254349-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-16ice: support FW Recovery ModeKonrad Knitter
Recovery Mode is intended to recover from a fatal failure scenario in which the device is not accessible to the host, meaning the firmware is non-responsive. The purpose of the Firmware Recovery Mode is to enable software tools to update firmware and/or device configuration so the fatal error can be resolved. Recovery Mode Firmware supports a limited set of admin commands required for NVM update. Recovery Firmware does not support hardware interrupts so a polling mode is used. The driver will expose only the minimum set of devlink commands required for the recovery of the adapter. Using an appropriate NVM image, the user can recover the adapter using the devlink flash API. Prior to 4.20 E810 Adapter Recovery Firmware supports only the update and erase of the "fw.mgmt" component. E810 Adapter Recovery Firmware doesn't support selected preservation of cards settings or identifiers. The following command can be used to recover the adapter: $ devlink dev flash <pci-address> <update-image.bin> component fw.mgmt overwrite settings overwrite identifier Newer FW versions (4.20 or newer) supports update of "fw.undi" and "fw.netlist" components. $ devlink dev flash <pci-address> <update-image.bin> Tested on Intel Corporation Ethernet Controller E810-C for SFP FW revision 3.20 and 4.30. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Konrad Knitter <konrad.knitter@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.13-rc8). Conflicts: drivers/net/ethernet/realtek/r8169_main.c 1f691a1fc4be ("r8169: remove redundant hwmon support") 152d00a91396 ("r8169: simplify setting hwmon attribute visibility") https://lore.kernel.org/20250115122152.760b4e8d@canb.auug.org.au Adjacent changes: drivers/net/ethernet/broadcom/bnxt/bnxt.c 152f4da05aee ("bnxt_en: add support for rx-copybreak ethtool command") f0aa6a37a3db ("eth: bnxt: always recalculate features after XDP clearing, fix null-deref") drivers/net/ethernet/intel/ice/ice_type.h 50327223a8bb ("ice: add lock to protect low latency interface") dc26548d729e ("ice: Fix quad registers read on E825") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-15net: protect NAPI enablement with netdev_lock()Jakub Kicinski
Wrap napi_enable() / napi_disable() with netdev_lock(). Provide the "already locked" flavor of the API. iavf needs the usual adjustment. A number of drivers call napi_enable() under a spin lock, so they have to be modified to take netdev_lock() first, then spin lock then call napi_enable_locked(). Protecting napi_enable() implies that napi->napi_id is protected by netdev_lock(). Acked-by: Francois Romieu <romieu@fr.zoreil.com> # via-velocity Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250115035319.559603-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-15net: protect netdev->napi_list with netdev_lock()Jakub Kicinski
Hold netdev->lock when NAPIs are getting added or removed. This will allow safe access to NAPI instances of a net_device without rtnl_lock. Create a family of helpers which assume the lock is already taken. Switch iavf to them, as it makes extensive use of netdev->lock, already. Reviewed-by: Joe Damato <jdamato@fastly.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250115035319.559603-6-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-15net: add netdev_lock() / netdev_unlock() helpersJakub Kicinski
Add helpers for locking the netdev instance, use it in drivers and the shaper code. This will make grepping for the lock usage much easier, as we extend the lock to cover more fields. Reviewed-by: Joe Damato <jdamato@fastly.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://patch.msgid.link/20250115035319.559603-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-14ice: Add in/out PTP pin delaysKarol Kolacinski
HW can have different input/output delays for each of the pins. Currently, only E82X adapters have delay compensation based on TSPLL config and E810 adapters have constant 1 ms compensation, both cases only for output delays and the same one for all pins. E825 adapters have different delays for SDP and other pins. Those delays are also based on direction and input delays are different than output ones. This is the main reason for moving delays to pin description structure. Add a field in ice_ptp_pin_desc structure to reflect that. Delay values are based on approximate calculations of HW delays based on HW spec. Implement external timestamp (input) delay compensation. Remove existing definitions and wrappers for periodic output propagation delays. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-14ice: implement low latency PHY timer updatesJacob Keller
Programming the PHY registers in preparation for an increment value change or a timer adjustment on E810 requires issuing Admin Queue commands for each PHY register. It has been found that the firmware Admin Queue processing occasionally has delays of tens or rarely up to hundreds of milliseconds. This delay cascades to failures in the PTP applications which depend on these updates being low latency. Consider a standard PTP profile with a sync rate of 16 times per second. This means there is ~62 milliseconds between sync messages. A complete cycle of the PTP algorithm 1) Sync message (with Tx timestamp) from source 2) Follow-up message from source 3) Delay request (with Tx timestamp) from sink 4) Delay response (with Rx timestamp of request) from source 5) measure instantaneous clock offset 6) request time adjustment via CLOCK_ADJTIME systemcall The Tx timestamps have a default maximum timeout of 10 milliseconds. If we assume that the maximum possible time is used, this leaves us with ~42 milliseconds of processing time for a complete cycle. The CLOCK_ADJTIME system call is synchronous and will block until the driver completes its timer adjustment or frequency change. If the writes to prepare the PHY timers get hit by a latency spike of 50 milliseconds, then the PTP application will be delayed past the point where the next cycle should start. Packets from the next cycle may have already arrived and are waiting on the socket. In particular, LinuxPTP ptp4l may start complaining about missing an announce message from the source, triggering a fault. In addition, the clockcheck logic it uses may trigger. This clockcheck failure occurs because the timestamp captured by hardware is compared against a reading of CLOCK_MONOTONIC. It is assumed that the time when the Rx timestamp is captured and the read from CLOCK_MONOTONIC are relatively close together. This is not the case if there is a significant delay to processing the Rx packet. Newer firmware supports programming the PHY registers over a low latency interface which bypasses the Admin Queue. Instead, software writes to the REG_LL_PROXY_L and REG_LL_PROXY_H registers. Firmware reads these registers and then programs the PHY timers. Implement functions to use this interface when available to program the PHY timers instead of using the Admin Queue. This avoids the Admin Queue latency and ensures that adjustments happen within acceptable latency bounds. Co-developed-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Anton Nadezhdin <anton.nadezhdin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-14ice: check low latency PHY timer update firmware capabilityJacob Keller
Newer versions of firmware support programming the PHY timer via the low latency interface exposed over REG_LL_PROXY_L and REG_LL_PROXY_H. Add support for checking the device capabilities for this feature. Co-developed-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Milena Olech <milena.olech@intel.com> Signed-off-by: Anton Nadezhdin <anton.nadezhdin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
generated by cgit (git 2.34.1) at 2025-07-30 14:24:37 +0000