summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/marvell
AgeCommit message (Collapse)Author
2022-03-11net: mv643xx_eth: use platform_get_irq() instead of platform_get_resource()Minghao Chi
It is not recommened to use platform_get_resource(pdev, IORESOURCE_IRQ) for requesting IRQ's resources any more, as they can be not ready yet in case of DT-booting. platform_get_irq() instead is a recommended way for getting IRQ even if it was not retrieved earlier. It also makes code simpler because we're getting "int" value right away and no conversion from resource to int is required. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
net/dsa/dsa2.c commit afb3cc1a397d ("net: dsa: unlock the rtnl_mutex when dsa_master_setup() fails") commit e83d56537859 ("net: dsa: replay master state events in dsa_tree_{setup,teardown}_master") https://lore.kernel.org/all/20220307101436.7ae87da0@canb.auug.org.au/ drivers/net/ethernet/intel/ice/ice.h commit 97b0129146b1 ("ice: Fix error with handling of bonding MTU") commit 43113ff73453 ("ice: add TTY for GNSS module for E810T device") https://lore.kernel.org/all/20220310112843.3233bcf1@canb.auug.org.au/ drivers/staging/gdm724x/gdm_lte.c commit fc7f750dc9d1 ("staging: gdm724x: fix use after free in gdm_lte_rx()") commit 4bcc4249b4cf ("staging: Use netif_rx().") https://lore.kernel.org/all/20220308111043.1018a59d@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-09net: marvell: prestera: Add missing of_node_put() in ↵Miaoqian Lin
prestera_switch_set_base_mac_addr This node pointer is returned by of_find_compatible_node() with refcount incremented. Calling of_node_put() to aovid the refcount leak. Fixes: 501ef3066c89 ("net: marvell: prestera: Add driver for Prestera family ASIC devices") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-08net: prestera: acl: make read-only array client_map static constColin Ian King
Don't populate the read-only array client_map on the stack but instead make it static const. Also makes the object code a little smaller. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20220307221349.164585-1-colin.i.king@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-03net: marvell: Use min() instead of doing it manuallyHaowen Bai
Fix following coccicheck warning: drivers/net/ethernet/marvell/mv643xx_eth.c:1664:35-36: WARNING opportunity for min() Signed-off-by: Haowen Bai <baihaowen88@gmail.com> Link: https://lore.kernel.org/r/1646271529-7659-1-git-send-email-baihaowen88@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-28flow_offload: reject offload for all drivers with invalid police parametersJianbo Liu
As more police parameters are passed to flow_offload, driver can check them to make sure hardware handles packets in the way indicated by tc. The conform-exceed control should be drop/pipe or drop/ok. Besides, for drop/ok, the police should be the last action. As hardware can't configure peakrate/avrate/overhead, offload should not be supported if any of them is configured. Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-24net: marvell: prestera: Fix return value check in prestera_kern_fib_cache_find()Yang Yingliang
rhashtable_lookup_fast() returns NULL pointer not ERR_PTR(), so it can return fib_node directly in prestera_kern_fib_cache_find(). Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220223084954.1771075-2-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-24net: marvell: prestera: Fix return value check in prestera_fib_node_find()Yang Yingliang
rhashtable_lookup_fast() returns NULL pointer not ERR_PTR(), so it can return fib_node directly in prestera_fib_node_find(). Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220223084954.1771075-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
tools/testing/selftests/net/mptcp/mptcp_join.sh 34aa6e3bccd8 ("selftests: mptcp: add ip mptcp wrappers") 857898eb4b28 ("selftests: mptcp: add missing join check") 6ef84b1517e0 ("selftests: mptcp: more robust signal race test") https://lore.kernel.org/all/20220221131842.468893-1-broonie@kernel.org/ drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/act.h drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/ct.c fb7e76ea3f3b6 ("net/mlx5e: TC, Skip redundant ct clear actions") c63741b426e11 ("net/mlx5e: Fix MPLSoUDP encap to use MPLS action information") 09bf97923224f ("net/mlx5e: TC, Move pedit_headers_action to parse_attr") 84ba8062e383 ("net/mlx5e: Test CT and SAMPLE on flow attr") efe6f961cd2e ("net/mlx5e: CT, Don't set flow flag CT for ct clear flow") 3b49a7edec1d ("net/mlx5e: TC, Reject rules with multiple CT actions") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-24net: mv643xx_eth: process retval from of_get_mac_addressMauri Sandberg
Obtaining a MAC address may be deferred in cases when the MAC is stored in an NVMEM block, for example, and it may not be ready upon the first retrieval attempt and return EPROBE_DEFER. It is also possible that a port that does not rely on NVMEM has been already created when getting the defer request. Thus, also the resources allocated previously must be freed when doing a roll-back. Fixes: 76723bca2802 ("net: mv643xx_eth: add DT parsing support") Signed-off-by: Mauri Sandberg <maukka@ext.kapsi.fi> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220223142337.41757-1-maukka@ext.kapsi.fi Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-23octeontx2-pf: Vary completion queue event sizeSubbaraya Sundeep
Completion Queue Entry(CQE) is a descriptor written by hardware to notify software about the send and receive completion status. The CQE can be of size 128 or 512 bytes. A 512 bytes CQE can hold more receive fragments pointers compared to 128 bytes CQE. This patch enables to modify CQE size using: <ethtool -G cqe-size N>. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-21octeontx2-af: cn10k: add workaround for ptp errataNaveen Mamindlapalli
This patch adds workaround for PTP errata given below. 1. At the time of 1 sec rollover of nano-second counter, the nano-second counter is set to 0. However, it should be set to (existing counter_value - 10^9). This leads to an accumulating error in the timestamp value with each sec rollover. 2. Additionally, the nano-second counter currently is rolling over at 'h3B9A_C9FF. It should roll over at 'h3B9A_CA00. The workaround for issue #1 is to speed up the ptp clock by adjusting PTP_CLOCK_COMP register to the desired value to compensate for the nanoseconds lost per each second. The workaround for issue #2 is to slow down the ptp clock such that the rollover occurs at ~1sec. Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: Rakesh Babu Saladi <rsaladi2@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-21octeontx2-pf: cn10k: add support for new ptp timestamp formatNaveen Mamindlapalli
The cn10k hardware ptp timestamp format has been modified primarily to support 1-step ptp clock. The 64-bit timestamp used by hardware is split into two 32-bit fields, the upper one holds seconds, the lower one nanoseconds. A new register (PTP_CLOCK_SEC) has been added that returns the current seconds value. The nanoseconds register PTP_CLOCK_HI resets after every second. The cn10k RPM block provides Rx/Tx timestamps to the NIX block using the new timestamp format. The software can read the current timestamp in nanoseconds by reading both PTP_CLOCK_SEC & PTP_CLOCK_HI registers. This patch provides support for new timestamp format. Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: Rakesh Babu Saladi <rsaladi2@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-19net: prestera: acl: fix 'client_map' buff overflowVolodymyr Mytnyk
smatch warnings: drivers/net/ethernet/marvell/prestera/prestera_acl.c:103 prestera_acl_chain_to_client() error: buffer overflow 'client_map' 3 <= 3 prestera_acl_chain_to_client(u32 chain_index, ...) ... u32 client_map[] = { PRESTERA_HW_COUNTER_CLIENT_LOOKUP_0, PRESTERA_HW_COUNTER_CLIENT_LOOKUP_1, PRESTERA_HW_COUNTER_CLIENT_LOOKUP_2 }; if (chain_index > ARRAY_SIZE(client_map)) ... Fixes: fa5d824ce5dd ("net: prestera: acl: add multi-chain support offload") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-19net: prestera: flower: fix destroy tmpl in chainVolodymyr Mytnyk
Fix flower destroy template callback to release template only for specific tc chain instead of all chain tempaltes. The issue was intruduced by previous commit that introduced multi-chain support. Fixes: fa5d824ce5dd ("net: prestera: acl: add multi-chain support offload") Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-18net: mvpp2: always set port pcs opsJeremy Linton
Booting a MACCHIATObin with 5.17, the system OOPs with a null pointer deref when the network is started. This is caused by the pcs->ops structure being null in mcpp2_acpi_start() when it tries to call pcs_config(). Hoisting the code which sets pcs_gmac.ops and pcs_xlg.ops, assuring they are always set, fixes the problem. The OOPs looks like: [ 18.687760] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000010 [ 18.698561] Mem abort info: [ 18.698564] ESR = 0x96000004 [ 18.698567] EC = 0x25: DABT (current EL), IL = 32 bits [ 18.709821] SET = 0, FnV = 0 [ 18.714292] EA = 0, S1PTW = 0 [ 18.718833] FSC = 0x04: level 0 translation fault [ 18.725126] Data abort info: [ 18.729408] ISV = 0, ISS = 0x00000004 [ 18.734655] CM = 0, WnR = 0 [ 18.738933] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000111bbf000 [ 18.745409] [0000000000000010] pgd=0000000000000000, p4d=0000000000000000 [ 18.752235] Internal error: Oops: 96000004 [#1] SMP [ 18.757134] Modules linked in: rfkill ip_set nf_tables nfnetlink qrtr sunrpc vfat fat omap_rng fuse zram xfs crct10dif_ce mvpp2 ghash_ce sbsa_gwdt phylink xhci_plat_hcd ahci_plam [ 18.773481] CPU: 0 PID: 681 Comm: NetworkManager Not tainted 5.17.0-0.rc3.89.fc36.aarch64 #1 [ 18.781954] Hardware name: Marvell Armada 7k/8k Family Board /Armada 7k/8k Family Board , BIOS EDK II Jun 4 2019 [ 18.795222] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 18.802213] pc : mvpp2_start_dev+0x2b0/0x300 [mvpp2] [ 18.807208] lr : mvpp2_start_dev+0x298/0x300 [mvpp2] [ 18.812197] sp : ffff80000b4732c0 [ 18.815522] x29: ffff80000b4732c0 x28: 0000000000000000 x27: ffffccab38ae57f8 [ 18.822689] x26: ffff6eeb03065a10 x25: ffff80000b473a30 x24: ffff80000b4735b8 [ 18.829855] x23: 0000000000000000 x22: 00000000000001e0 x21: ffff6eeb07b6ab68 [ 18.837021] x20: ffff6eeb07b6ab30 x19: ffff6eeb07b6a9c0 x18: 0000000000000014 [ 18.844187] x17: 00000000f6232bfe x16: ffffccab899b1dc0 x15: 000000006a30f9fa [ 18.851353] x14: 000000003b77bd50 x13: 000006dc896f0e8e x12: 001bbbfccfd0d3a2 [ 18.858519] x11: 0000000000001528 x10: 0000000000001548 x9 : ffffccab38ad0fb0 [ 18.865685] x8 : ffff80000b473330 x7 : 0000000000000000 x6 : 0000000000000000 [ 18.872851] x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff80000b4732f8 [ 18.880017] x2 : 000000000000001a x1 : 0000000000000002 x0 : ffff6eeb07b6ab68 [ 18.887183] Call trace: [ 18.889637] mvpp2_start_dev+0x2b0/0x300 [mvpp2] [ 18.894279] mvpp2_open+0x134/0x2b4 [mvpp2] [ 18.898483] __dev_open+0x128/0x1e4 [ 18.901988] __dev_change_flags+0x17c/0x1d0 [ 18.906187] dev_change_flags+0x30/0x70 [ 18.910038] do_setlink+0x278/0xa7c [ 18.913540] __rtnl_newlink+0x44c/0x7d0 [ 18.917391] rtnl_newlink+0x5c/0x8c [ 18.920892] rtnetlink_rcv_msg+0x254/0x314 [ 18.925006] netlink_rcv_skb+0x48/0x10c [ 18.928858] rtnetlink_rcv+0x24/0x30 [ 18.932449] netlink_unicast+0x290/0x2f4 [ 18.936386] netlink_sendmsg+0x1d0/0x41c [ 18.940323] sock_sendmsg+0x60/0x70 [ 18.943825] ____sys_sendmsg+0x248/0x260 [ 18.947762] ___sys_sendmsg+0x74/0xa0 [ 18.951438] __sys_sendmsg+0x64/0xcc [ 18.955027] __arm64_sys_sendmsg+0x30/0x40 [ 18.959140] invoke_syscall+0x50/0x120 [ 18.962906] el0_svc_common.constprop.0+0x4c/0xf4 [ 18.967629] do_el0_svc+0x30/0x9c [ 18.970958] el0_svc+0x28/0xb0 [ 18.974025] el0t_64_sync_handler+0x10c/0x140 [ 18.978400] el0t_64_sync+0x1a4/0x1a8 [ 18.982078] Code: 52800004 b9416262 aa1503e0 52800041 (f94008a5) [ 18.988196] ---[ end trace 0000000000000000 ]--- Fixes: cff056322372 ("net: mvpp2: use .mac_select_pcs() interface") Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Reviewed-by: Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/r/20220214231852.3331430-1-jeremy.linton@arm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-17net: marvell: prestera: handle fib notificationsYevhen Orlov
For now we support only TRAP or DROP, so we can offload only "local" or "blackhole" routes. Nexthop routes is TRAP for now. Will be implemented soon. Co-developed-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-17net: marvell: prestera: add hardware router objects accounting for lpmYevhen Orlov
Add new router_hw object "fib_node". For now it support only DROP and TRAP mode. Co-developed-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-17net: marvell: prestera: Add router LPM ABIYevhen Orlov
Add functions to create/delete lpm entry in hw. prestera_hw_lpm_add() take index of allocated virtual router. Also it takes grp_id, which is index of allocated nexthop group. ABI to create nexthop group will be added soon. Co-developed-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-17treewide: Replace zero-length arrays with flexible-array membersGustavo A. R. Silva
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. This code was transformed with the help of Coccinelle: (next-20220214$ spatch --jobs $(getconf _NPROCESSORS_ONLN) --sp-file script.cocci --include-headers --dir . > output.patch) @@ identifier S, member, array; type T1, T2; @@ struct S { ... T1 member; T2 array[ - 0 ]; }; UAPI and wireless changes were intentionally excluded from this patch and will be sent out separately. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays Link: https://github.com/KSPP/linux/issues/78 Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2022-02-14net: prestera: acl: add multi-chain support offloadVolodymyr Mytnyk
Add support of rule offloading added to the non-zero index chain, which was previously forbidden. Also, goto action is offloaded allowing to jump for processing of desired chain. Note that only implicit chain 0 is bound to the device port(s) for processing. The rest of chains have to be jumped by actions. Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-11octeontx2-af: fix array bound errorHariprasad Kelam
This patch fixes below error by using proper data type. drivers/net/ethernet/marvell/octeontx2/af/rpm.c: In function 'rpm_cfg_pfc_quanta_thresh': include/linux/find.h:40:23: error: array subscript 'long unsigned int[0]' is partly outside array bounds of 'u16[1]' {aka 'short unsigned int[1]'} [-Werror=array-bounds] 40 | val = *addr & GENMASK(size - 1, offset); Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Link: https://lore.kernel.org/r/20220211155539.13931-1-hkelam@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-10octeontx2-pf: Add TC feature for VFsSubbaraya Sundeep
This patch adds TC feature for VFs also. When MCAM rules are allocated for a VF then either TC or ntuple filters can be used. Below are the commands to use TC feature for a VF(say lbk0): devlink dev param set pci/0002:01:00.1 name mcam_count value 16 \ cmode runtime ethtool -K lbk0 hw-tc-offload on ifconfig lbk0 up tc qdisc add dev lbk0 ingress tc filter add dev lbk0 parent ffff: protocol ip flower skip_sw \ dst_mac 98:03:9b:83:aa:12 action police rate 100Mbit burst 5000 Also to modify any fields of the hardware context with NIX_AQ_INSTOP_WRITE command then corresponding masks of those fields must be set as per hardware. This was missing in ingress ratelimiting context. This patch sets those masks also. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-09octeontx2-pf: PFC config support with DCBxHariprasad Kelam
Data centric bridging designed to eliminate packet loss due to queue overflow by adding enhancements to ethernet network such as proprity flow control etc. This patch adds support for management of Priority flow control(PFC) on Octeontx2 and CN10K interfaces. To enable PFC for all priorities dcb pfc set dev eth0 prio-pfc all:on/off To enable PFC on selected priorites dcb pfc set dev eth0 prio-pfc 0:on/off 1:on/off ..7:on/off With the ntuple commands user can map Priority to receive queues. On queue overflow NIX will assert backpressure such that PFC pause frames are genarated with mapped priority. To map priority 7 to Queue 1 ethtool -U eth0 flow-type ether dst xx:xx:xx:xx:xx:xx vlan 0xe00a m 0x1fff queue 1 Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-09octeontx2-af: Flow control resource managementHariprasad Kelam
CN10K MAC block (RPM) and Octeontx2 MAC block (CGX) both supports PFC flow control and 802.3X flow control pause frames. Each MAC block supports max 4 LMACS and AF driver assigns same (MAC,LMAC) to PF and its VFs. As PF and its share same (MAC,LMAC) pair we need resource management to address below scenarios 1. Maintain PFC and 8023X pause frames mutually exclusive. 2. Reject disable flow control request if other PF or Vfs enabled it. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-09octeontx2-af: Priority flow control configuration supportSunil Kumar Kori
Prirority based flow control (802.1Qbb) mechanism is similar to ethernet pause frames (802.3x) instead pausing all traffic on a link, PFC allows user to selectively pause traffic according to its class. Oceteontx2 MAC block (CGX) and CN10K Mac block (RPM) both supports PFC. As upper layer mbox handler is same for both the MACs, this patch configures PFC by calling apporopritate callbacks. Signed-off-by: Sunil Kumar Kori <skori@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-09octeontx2-af: Don't enable Pause frames by defaultHariprasad Kelam
Current implementation is such that 802.3x pause frames are enabled by default. As CGX and RPM blocks support PFC (priority flow control) also, instead of driver enabling one between them enable them upon request from PF or its VFs. Also add support to disable pause frames in driver unbind. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-05crypto: octeontx2 - disable DMA black hole on an DMA faultSrujana Challa
When CPT_AF_DIAG[FLT_DIS] = 0 and a CPT engine access to LLC/DRAM encounters a fault/poison, a rare case may result in unpredictable data being delivered to a CPT engine. So, this patch adds code to set FLT_DIS as a workaround. Signed-off-by: Srujana Challa <schalla@marvell.com> Signed-off-by: Shijith Thotton <sthotton@marvell.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-01-28octeontx2-pf: Change receive buffer size using ethtoolSubbaraya Sundeep
ethtool rx-buf-len is for setting receive buffer size, support setting it via ethtool -G parameter and getting it via ethtool -g parameter. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-28net: mvneta: remove unnecessary if condition in mvneta_xdp_submit_frameLorenzo Bianconi
Get rid of unnecessary if check on tx_desc pointer in mvneta_xdp_submit_frame routine since num_frames is always greater than 0 and tx_desc pointer is always initialized. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-27net: mvneta: use .mac_select_pcs() interfaceRussell King (Oracle)
Convert mvneta to use the mac_select_interface rather than using phylink_set_pcs(). The intention here is to unify the approach for PCS and eventually remove phylink_set_pcs(). Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-27net: mvneta: reorder initialisationRussell King (Oracle)
Re-order the mvneta initialisation to move devm based resources and easy setup earlier in the probe function. The primary reason for this is to allow us to switch the driver to use phylink's mac_select_pcs() callback. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-24net: use bool values to pass bool param of phy_init_eee()Jisheng Zhang
The 2nd param of phy_init_eee(): clk_stop_enable is a bool param, use true or false instead of 1/0. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220123152241.1480-1-jszhang@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-24Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski
Daniel Borkmann says: ==================== pull-request: bpf-next 2022-01-24 We've added 80 non-merge commits during the last 14 day(s) which contain a total of 128 files changed, 4990 insertions(+), 895 deletions(-). The main changes are: 1) Add XDP multi-buffer support and implement it for the mvneta driver, from Lorenzo Bianconi, Eelco Chaudron and Toke Høiland-Jørgensen. 2) Add unstable conntrack lookup helpers for BPF by using the BPF kfunc infra, from Kumar Kartikeya Dwivedi. 3) Extend BPF cgroup programs to export custom ret value to userspace via two helpers bpf_get_retval() and bpf_set_retval(), from YiFei Zhu. 4) Add support for AF_UNIX iterator batching, from Kuniyuki Iwashima. 5) Complete missing UAPI BPF helper description and change bpf_doc.py script to enforce consistent & complete helper documentation, from Usama Arif. 6) Deprecate libbpf's legacy BPF map definitions and streamline XDP APIs to follow tc-based APIs, from Andrii Nakryiko. 7) Support BPF_PROG_QUERY for BPF programs attached to sockmap, from Di Zhu. 8) Deprecate libbpf's bpf_map__def() API and replace users with proper getters and setters, from Christy Lee. 9) Extend libbpf's btf__add_btf() with an additional hashmap for strings to reduce overhead, from Kui-Feng Lee. 10) Fix bpftool and libbpf error handling related to libbpf's hashmap__new() utility function, from Mauricio Vásquez. 11) Add support to BTF program names in bpftool's program dump, from Raman Shukhau. 12) Fix resolve_btfids build to pick up host flags, from Connor O'Brien. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (80 commits) selftests, bpf: Do not yet switch to new libbpf XDP APIs selftests, xsk: Fix rx_full stats test bpf: Fix flexible_array.cocci warnings xdp: disable XDP_REDIRECT for xdp frags bpf: selftests: add CPUMAP/DEVMAP selftests for xdp frags bpf: selftests: introduce bpf_xdp_{load,store}_bytes selftest net: xdp: introduce bpf_xdp_pointer utility routine bpf: generalise tail call map compatibility check libbpf: Add SEC name for xdp frags programs bpf: selftests: update xdp_adjust_tail selftest to include xdp frags bpf: test_run: add xdp_shared_info pointer in bpf_test_finish signature bpf: introduce frags support to bpf_prog_test_run_xdp() bpf: move user_size out of bpf_test_init bpf: add frags support to xdp copy helpers bpf: add frags support to the bpf_xdp_adjust_tail() API bpf: introduce bpf_xdp_get_buff_len helper net: mvneta: enable jumbo frames if the loaded XDP program support frags bpf: introduce BPF_F_XDP_HAS_FRAGS flag in prog_flags loading the ebpf program net: mvneta: add frags support to XDP_TX xdp: add frags support to xdp_return_{buff/frame} ... ==================== Link: https://lore.kernel.org/r/20220124221235.18993-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-21bpf: add frags support to the bpf_xdp_adjust_tail() APIEelco Chaudron
This change adds support for tail growing and shrinking for XDP frags. When called on a non-linear packet with a grow request, it will work on the last fragment of the packet. So the maximum grow size is the last fragments tailroom, i.e. no new buffer will be allocated. A XDP frags capable driver is expected to set frag_size in xdp_rxq_info data structure to notify the XDP core the fragment size. frag_size set to 0 is interpreted by the XDP core as tail growing is not allowed. Introduce __xdp_rxq_info_reg utility routine to initialize frag_size field. When shrinking, it will work from the last fragment, all the way down to the base buffer depending on the shrinking size. It's important to mention that once you shrink down the fragment(s) are freed, so you can not grow again to the original size. Acked-by: Toke Hoiland-Jorgensen <toke@redhat.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Eelco Chaudron <echaudro@redhat.com> Link: https://lore.kernel.org/r/eabda3485dda4f2f158b477729337327e609461d.1642758637.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-01-21net: mvneta: enable jumbo frames if the loaded XDP program support fragsLorenzo Bianconi
Enable the capability to receive jumbo frames even if the interface is running in XDP mode if the loaded program declare to properly support xdp frags. At same time reject a xdp program not supporting xdp frags if the driver is running in xdp frags mode. Acked-by: Toke Hoiland-Jorgensen <toke@redhat.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/6909f81a3cbb8fb6b88e914752c26395771b882a.1642758637.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-01-21net: mvneta: add frags support to XDP_TXLorenzo Bianconi
Introduce the capability to map non-linear xdp buffer running mvneta_xdp_submit_frame() for XDP_TX and XDP_REDIRECT Acked-by: Toke Hoiland-Jorgensen <toke@redhat.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/5d46ab63870ffe96fb95e6075a7ff0c81ef6424d.1642758637.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-01-21net: marvell: rely on xdp_update_skb_shared_info utility routineLorenzo Bianconi
Rely on xdp_update_skb_shared_info routine in order to avoid resetting frags array in skb_shared_info structure building the skb in mvneta_swbm_build_skb(). Frags array is expected to be initialized by the receiving driver building the xdp_buff and here we just need to update memory metadata. Acked-by: Toke Hoiland-Jorgensen <toke@redhat.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/e0dad97f5d02b13f189f99f1e5bc8e61bef73412.1642758637.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-01-21net: mvneta: simplify mvneta_swbm_add_rx_fragment managementLorenzo Bianconi
Relying on xdp frags bit, remove skb_shared_info structure allocated on the stack in mvneta_rx_swbm routine and simplify mvneta_swbm_add_rx_fragment accessing skb_shared_info in the xdp_buff structure directly. There is no performance penalty in this approach since mvneta_swbm_add_rx_fragment is run just for xdp frags use-case. Acked-by: Toke Hoiland-Jorgensen <toke@redhat.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/45f050c094ccffce49d6bc5112939ed35250ba90.1642758637.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-01-21net: mvneta: update frags bit before passing the xdp buffer to eBPF layerLorenzo Bianconi
Update frags bit (XDP_FLAGS_HAS_FRAGS) in xdp_buff to notify XDP/eBPF layer and XDP remote drivers if this is a "non-linear" XDP buffer. Access skb_shared_info only if XDP_FLAGS_HAS_FRAGS flag is set in order to avoid possible cache-misses. Acked-by: Toke Hoiland-Jorgensen <toke@redhat.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/c00a73097f8a35860d50dae4a36e6cc9ef7e172f.1642758637.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-01-21octeontx2-af: Add KPU changes to parse NGIO as separate layerKiran Kumar K
With current KPU profile NGIO is being parsed along with CTAG as a single layer. Because of this MCAM/ntuple rules installed with ethertype as 0x8842 are not being hit. Adding KPU profile changes to parse NGIO in separate ltype and CTAG in separate ltype. Fixes: f9c49be90c05 ("octeontx2-af: Update the default KPU profile and fixes") Signed-off-by: Kiran Kumar K <kirankumark@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-21octeontx2-pf: Forward error codes to VFSubbaraya Sundeep
PF forwards its VF messages to AF and corresponding replies from AF to VF. AF sets proper error code in the replies after processing message requests. Currently PF checks the error codes in replies and sends invalid message to VF. This way VF lacks the information of error code set by AF for its messages. This patch changes that such that PF simply forwards AF replies so that VF can handle error codes. Fixes: d424b6c02415 ("octeontx2-pf: Enable SRIOV and added VF mbox handling") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-21octeontx2-af: cn10k: Do not enable RPM loopback for LPC interfacesGeetha sowjanya
Internal looback is not supported to low rate LPCS interface like SGMII/QSGMII. Hence don't allow to enable for such interfaces. Fixes: 3ad3f8f93c81 ("octeontx2-af: cn10k: MAC internal loopback support") Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-21octeontx2-af: Increase link credit restore polling timeoutGeetha sowjanya
It's been observed that sometimes link credit restore takes a lot of time than the current timeout. This patch increases the default timeout value and return the proper error value on failure. Fixes: 1c74b89171c3 ("octeontx2-af: Wait for TX link idle for credits change") Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-21octeontx2-pf: cn10k: Ensure valid pointers are freed to auraGeetha sowjanya
While freeing SQB pointers to aura, driver first memcpy to target address and then triggers lmtst operation to free pointer to the aura. We need to ensure(by adding dmb barrier)that memcpy is finished before pointers are freed to the aura. This patch also adds the missing sq context structure entry in debugfs. Fixes: ef6c8da71eaf ("octeontx2-pf: cn10K: Reserve LMTST lines per core") Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-21octeontx2-af: cn10k: Use appropriate register for LMAC enableGeetha sowjanya
CN10K platforms uses RPM(0..2)_MTI_MAC100(0..3)_COMMAND_CONFIG register for lmac TX/RX enable whereas CN9xxx platforms use CGX_CMRX_CONFIG register. This config change was missed when adding support for CN10K RPM. Fixes: 91c6945ea1f9 ("octeontx2-af: cn10k: Add RPM MAC support") Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-21octeontx2-af: Retry until RVU block reset completeGeetha sowjanya
Few RVU blocks like SSO require more time for reset on some silicons. Hence retrying the block reset until success. Fixes: c0fa2cff8822c ("octeontx2-af: Handle return value in block reset") Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-21octeontx2-af: Fix LBK backpressure id countSunil Goutham
In rvu_nix_get_bpid() lbk_bpid_cnt is being read from wrong register. Due to this backpressure enable is failing for LBK VF32 onwards. This patch fixes that. Fixes: fe1939bb2340 ("octeontx2-af: Add SDP interface support") Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-21octeontx2-af: Do not fixup all VF action entriesSubbaraya Sundeep
AF modifies all the rules destined for VF to use the action same as default RSS action. This fixup was needed because AF only installs default rules with RSS action. But the action in rules installed by a PF for its VFs should not be changed by this fixup. This is because action can be drop or direct to queue as specified by user(ntuple filters). This patch fixes that problem. Fixes: 967db3529eca ("octeontx2-af: add support for multicast/promisc packet") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-12net: marvell: prestera: Fix deinit sequence for routerYevhen Orlov
* Add missed call prestera_router_fini in prestera_switch_fini * Add prestera_router_hw_fini, which verify lists are empty Fixes: 69204174cc5c ("net: marvell: prestera: Add prestera router infra") Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Link: https://lore.kernel.org/r/20220111011129.5457-1-yevhen.orlov@plvision.eu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-19 11:21:03 +0000