summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/mellanox/mlxsw
AgeCommit message (Collapse)Author
2020-07-13mlxsw: spectrum_qdisc: Offload mirroring on RED qevent early_dropPetr Machata
The RED qevents early_drop and mark can be offloaded under the following fairly strict conditions: - At most one filter is configured at the qevent block - The protocol is "any" - The classifier is matchall - The action is trap, sample, or mirror with the same conditions as with other SPAN offloads - The hw_counters type is none In this patchset, implement offload of mirror for early_drop qevent. The ECN trigger is currently not implemented in the FW and therefore the mark qevent is not supported. The qevent notifications look exactly like regular block binding notifications with a binder type that identifies them as qevents. Therefore the details of processing this binding are fairly similar to the matchall offload. struct flow_block_offload.sch points at the qdisc in question. Use it to figure out if the qdisc is offloaded at all and what TC it configures. Bounce bindings on not-offloaded qdiscs. Individual bindings are kept in a list so that several qevents can share the same block and all binding points get configured as the configured filters change. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-13mlxsw: spectrum_flow: Promote binder-type dispatch to spectrum.cPetr Machata
Two RED qevents have been introduced recently. From the point of view of a driver, qevents are simply blocks with unusual binder types. However they need to be handled by different logic than ACL-like flows. Thus rename mlxsw_sp_setup_tc_block() to mlxsw_sp_setup_tc_block_clsact() and move the binder-type dispatch from there to spectrum.c into a new function of the original name. The new dispatcher is easier to extend with new binder types. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-13mlxsw: spectrum_matchall: Publish matchall data structuresPetr Machata
A following patch introduces offloading of filters attached to blocks bound to the RED tail_drop qevent. The only classifier that mlxsw will permit in this role is matchall. mlxsw currently offloads matchall filters used with clsact qdisc. The data structures used for that offload will come handy for the qevent offload as well. Publish them in spectrum.h. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-13mlxsw: spectrum_flow: Drop an unused fieldPetr Machata
The field "dev" in struct mlxsw_sp_flow_block_binding is not used. Drop it. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-13mlxsw: spectrum_flow: Convert a goto to a returnPetr Machata
No clean-up is performed at the target label of this goto. Convert it to a direct return. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-13mlxsw: spectrum_span: Add APIs to enable / disable global mirroring triggersIdo Schimmel
While the binding of global mirroring triggers to a SPAN agent is global, packets are only mirrored if they belong to a port and TC on which the trigger was enabled. This allows, for example, to mirror packets that were tail-dropped on a specific netdev. Implement the operations that allow to enable / disable a global mirroring trigger on a specific port and TC. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-13mlxsw: spectrum_span: Add support for global mirroring triggersIdo Schimmel
Global mirroring triggers are triggers that are only keyed by their trigger, as opposed to per-port triggers, which are keyed by their trigger and port. Such triggers allow mirroring packets that were tail/early dropped or ECN marked to a SPAN agent. Implement the previously added trigger operations for these global triggers. Since such triggers are only supported from Spectrum-2 onwards, have the Spectrum-1 operations return an error. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-13mlxsw: spectrum_span: Prepare for global mirroring triggersIdo Schimmel
Currently, a SPAN agent can only be bound to a per-port trigger where the trigger is either an incoming packet (INGRESS) or an outgoing packet (EGRESS) to / from the port. The subsequent patch will introduce the concept of global mirroring triggers. The binding / unbinding of global triggers is different than that of per-port triggers. Such triggers also need to be enabled / disabled on a per-{port, TC} basis and are only supported from Spectrum-2 onwards. Add trigger operations that allow us to abstract these differences. Only implement the operations for per-port triggers. Next patch will implement the operations for global triggers. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-13mlxsw: spectrum_span: Move SPAN operations out of global fileIdo Schimmel
The per-ASIC SPAN operations are relevant to the SPAN module and therefore should be implemented there and not in the main driver file. Move them. These operations will be extended later on. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-13mlxsw: reg: Add Monitoring Port Analyzer Global RegisterAmit Cohen
This register is used for global port analyzer configurations. Signed-off-by: Amit Cohen <amitc@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-13mlxsw: reg: Add Monitoring Mirror Trigger Enable RegisterAmit Cohen
This register is used to configure the mirror enable for different mirror reasons. Signed-off-by: Amit Cohen <amitc@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
All conflicts seemed rather trivial, with some guidance from Saeed Mameed on the tc_ct.c one. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-10mlxsw: pci: Fix use-after-free in case of failed devlink reloadIdo Schimmel
In case devlink reload failed, it is possible to trigger a use-after-free when querying the kernel for device info via 'devlink dev info' [1]. This happens because as part of the reload error path the PCI command interface is de-initialized and its mailboxes are freed. When the devlink '->info_get()' callback is invoked the device is queried via the command interface and the freed mailboxes are accessed. Fix this by initializing the command interface once during probe and not during every reload. This is consistent with the other bus used by mlxsw (i.e., 'mlxsw_i2c') and also allows user space to query the running firmware version (for example) from the device after a failed reload. [1] BUG: KASAN: use-after-free in memcpy include/linux/string.h:406 [inline] BUG: KASAN: use-after-free in mlxsw_pci_cmd_exec+0x177/0xa60 drivers/net/ethernet/mellanox/mlxsw/pci.c:1675 Write of size 4096 at addr ffff88810ae32000 by task syz-executor.1/2355 CPU: 1 PID: 2355 Comm: syz-executor.1 Not tainted 5.8.0-rc2+ #29 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xf6/0x16e lib/dump_stack.c:118 print_address_description.constprop.0+0x1c/0x250 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 check_memory_region_inline mm/kasan/generic.c:186 [inline] check_memory_region+0x14e/0x1b0 mm/kasan/generic.c:192 memcpy+0x39/0x60 mm/kasan/common.c:106 memcpy include/linux/string.h:406 [inline] mlxsw_pci_cmd_exec+0x177/0xa60 drivers/net/ethernet/mellanox/mlxsw/pci.c:1675 mlxsw_cmd_exec+0x249/0x550 drivers/net/ethernet/mellanox/mlxsw/core.c:2335 mlxsw_cmd_access_reg drivers/net/ethernet/mellanox/mlxsw/cmd.h:859 [inline] mlxsw_core_reg_access_cmd drivers/net/ethernet/mellanox/mlxsw/core.c:1938 [inline] mlxsw_core_reg_access+0x2f6/0x540 drivers/net/ethernet/mellanox/mlxsw/core.c:1985 mlxsw_reg_query drivers/net/ethernet/mellanox/mlxsw/core.c:2000 [inline] mlxsw_devlink_info_get+0x17f/0x6e0 drivers/net/ethernet/mellanox/mlxsw/core.c:1090 devlink_nl_info_fill.constprop.0+0x13c/0x2d0 net/core/devlink.c:4588 devlink_nl_cmd_info_get_dumpit+0x246/0x460 net/core/devlink.c:4648 genl_lock_dumpit+0x85/0xc0 net/netlink/genetlink.c:575 netlink_dump+0x515/0xe50 net/netlink/af_netlink.c:2245 __netlink_dump_start+0x53d/0x830 net/netlink/af_netlink.c:2353 genl_family_rcv_msg_dumpit.isra.0+0x296/0x300 net/netlink/genetlink.c:638 genl_family_rcv_msg net/netlink/genetlink.c:733 [inline] genl_rcv_msg+0x78d/0x9d0 net/netlink/genetlink.c:753 netlink_rcv_skb+0x152/0x440 net/netlink/af_netlink.c:2469 genl_rcv+0x24/0x40 net/netlink/genetlink.c:764 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x53a/0x750 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x850/0xd90 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0x150/0x190 net/socket.c:672 ____sys_sendmsg+0x6d8/0x840 net/socket.c:2363 ___sys_sendmsg+0xff/0x170 net/socket.c:2417 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2450 do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: a9c8336f6544 ("mlxsw: core: Add support for devlink info command") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-10mlxsw: spectrum_router: Remove inappropriate usage of WARN_ON()Ido Schimmel
We should not trigger a warning when a memory allocation fails. Remove the WARN_ON(). The warning is constantly triggered by syzkaller when it is injecting faults: [ 2230.758664] FAULT_INJECTION: forcing a failure. [ 2230.758664] name failslab, interval 1, probability 0, space 0, times 0 [ 2230.762329] CPU: 3 PID: 1407 Comm: syz-executor.0 Not tainted 5.8.0-rc2+ #28 ... [ 2230.898175] WARNING: CPU: 3 PID: 1407 at drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:6265 mlxsw_sp_router_fib_event+0xfad/0x13e0 [ 2230.898179] Kernel panic - not syncing: panic_on_warn set ... [ 2230.898183] CPU: 3 PID: 1407 Comm: syz-executor.0 Not tainted 5.8.0-rc2+ #28 [ 2230.898190] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Fixes: 3057224e014c ("mlxsw: spectrum_router: Implement FIB offload in deferred work") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09devlink: Move input checks from driver to devlinkDanielle Ratson
Currently, all the input checks are done in driver. After adding the split capability to devlink port, move the checks to devlink. Signed-off-by: Danielle Ratson <danieller@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09devlink: Add a new devlink port split ability attribute and pass to netlinkDanielle Ratson
Add a new attribute that indicates the split ability of devlink port. Drivers are expected to set it via devlink_port_attrs_set(), before registering the port. Signed-off-by: Danielle Ratson <danieller@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09mlxsw: Set port split ability attribute in driverDanielle Ratson
Currently, port attributes like flavour, port number and whether the port was split are set when initializing a port. Set the split ability of the port as well, based on port_mapping->width field and split attribute of devlink port in spectrum, so that it could be easily passed to devlink in the next patch. Signed-off-by: Danielle Ratson <danieller@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09devlink: Add a new devlink port lanes attribute and pass to netlinkDanielle Ratson
Add a new devlink port attribute that indicates the port's number of lanes. Drivers are expected to set it via devlink_port_attrs_set(), before registering the port. The attribute is not passed to user space in case the number of lanes is invalid (0). Signed-off-by: Danielle Ratson <danieller@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09mlxsw: Set number of port lanes attribute in driverDanielle Ratson
Currently, port attributes like flavour, port number and whether the port was split are set when initializing a port. Set the number of lanes of the port as well so that it could be easily passed to devlink in the next patch. Signed-off-by: Danielle Ratson <danieller@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09devlink: Replace devlink_port_attrs_set parameters with a structDanielle Ratson
Currently, devlink_port_attrs_set accepts a long list of parameters, that most of them are devlink port's attributes. Use the devlink_port_attrs struct to replace the relevant parameters. Signed-off-by: Danielle Ratson <danieller@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-29mlxsw: spectrum_ethtool: Add link extended stateAmit Cohen
Implement .get_down_ext_state() as part of ethtool_ops. Query link down reason from PDDR register and convert it to ethtool link_ext_state. In case that more information than common link_ext_state is provided, fill link_ext_substate also with the appropriate value. Signed-off-by: Amit Cohen <amitc@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-29mlxsw: reg: Port Diagnostics Database RegisterAmit Cohen
The PDDR register enables to read the Phy debug database. Signed-off-by: Amit Cohen <amitc@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-29mlxsw: spectrum_ethtool: Move mlxsw_sp_port_type_speed_ops structsAmit Cohen
Move mlxsw_sp1_port_type_speed_ops and mlxsw_sp2_port_type_speed_ops with the relevant code from spectrum.c to spectrum_ethtool.c. Signed-off-by: Amit Cohen <amitc@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-29mlxsw: Move ethtool_ops to spectrum_ethtool.cAmit Cohen
Add spectrum_ethtool.c file for ethtool code. Move ethtool_ops and the relevant code from spectrum.c to spectrum_ethtool.c. Signed-off-by: Amit Cohen <amitc@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-29mlxsw: spectrum_dcb: Rename mlxsw_sp_port_headroom_set()Amit Cohen
mlxsw_sp_port_headroom_set() is defined twice - in spectrum.c and in spectrum_dcb.c, with different arguments and different implementation but the name is same. Rename mlxsw_sp_port_headroom_set() to mlxsw_sp_port_headroom_ets_set() in order to allow using the second function in several files, and not only as static function in spectrum.c. Signed-off-by: Amit Cohen <amitc@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-29thermal: Simplify or eliminate unnecessary set_mode() methodsAndrzej Pietrasiewicz
Setting polling_delay is now done at thermal_core level (by not polling DISABLED devices), so no need to repeat this code. int340x: Checking for an impossible enum value is unnecessary. acpi/thermal: It only prints debug messages. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> [for acerhdf] Acked-by: Peter Kaestle <peter@piie.net> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200629122925.21729-11-andrzej.p@collabora.com
2020-06-29thermal: Use mode helpers in driversAndrzej Pietrasiewicz
Use thermal_zone_device_{en|dis}able() and thermal_zone_device_is_enabled(). Consequently, all set_mode() implementations in drivers: - can stop modifying tzd's "mode" member, - shall stop taking tzd's lock, as it is taken in the helpers - shall stop calling thermal_zone_device_update() as it is called in the helpers - can assume they are called when the mode truly changes, so checks to verify that can be dropped Not providing set_mode() by a driver no longer prevents the core from being able to set tzd's mode, so the relevant check in mode_store() is removed. Other comments: - acpi/thermal.c: tz->thermal_zone->mode will be updated only after we return from set_mode(), so use function parameter in thermal_set_mode() instead, no need to call acpi_thermal_check() in set_mode() - thermal/imx_thermal.c: regmap writes and mode assignment are done in thermal_zone_device_{en|dis}able() and set_mode() callback - thermal/intel/intel_quark_dts_thermal.c: soc_dts_{en|dis}able() are a part of set_mode() callback, so they don't need to modify tzd->mode, and don't need to fall back to the opposite mode if unsuccessful, as the return value will be propagated to thermal_zone_device_{en|dis}able() and ultimately tzd's member will not be changed in thermal_zone_device_set_mode(). - thermal/of-thermal.c: no need to set zone->mode to DISABLED in of_parse_thermal_zones() as a tzd is kzalloc'ed so mode is DISABLED anyway Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> [for acerhdf] Acked-by: Peter Kaestle <peter@piie.net> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200629122925.21729-8-andrzej.p@collabora.com
2020-06-29thermal: remove get_mode() operation of driversAndrzej Pietrasiewicz
get_mode() is now redundant, as the state is stored in struct thermal_zone_device. Consequently the "mode" attribute in sysfs can always be visible, because it is always possible to get the mode from struct tzd. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> [for acerhdf] Acked-by: Peter Kaestle <peter@piie.net> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200629122925.21729-6-andrzej.p@collabora.com
2020-06-29thermal: Store device mode in struct thermal_zone_deviceAndrzej Pietrasiewicz
Prepare for eliminating get_mode(). Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> [for acerhdf] Acked-by: Peter Kaestle <peter@piie.net> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200629122925.21729-5-andrzej.p@collabora.com
2020-06-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Minor overlapping changes in xfrm_device.c, between the double ESP trailing bug fix setting the XFRM_INIT flag and the changes in net-next preparing for bonding encryption support. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23mlxsw: Enforce firmware version for Spectrum-3Petr Machata
In a fashion similar to the other Spectrum systems, enforce a specific firmware version for Spectrum-3 so that the driver and firmware are always in sync with regards to new features. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23mlxsw: Bump firmware version to XX.2007.1168Petr Machata
This version comes with fixes to the following problems, among others: - Wrong shaper configuration on Spectrum-1 - Bogus temperature reading on Spectrum-2 - Problems in setting egress buffer size after MTU change on Spectrum-2 Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23mlxsw: spectrum_dcb: Fix a spelling typo in spectrum_dcb.cMasanari Iida
This patch fixes a spelling typo in spectrum_dcb.c Signed-off-by: Masanari Iida <standby24x7@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-22mlxsw: spectrum_acl: Support FLOW_ACTION_MANGLE for TCP, UDP portsPetr Machata
Spectrum-2 supports an ACL action L4_PORT, which allows TCP and UDP source and destination port number change. Offload suitable mangles to this action. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-22mlxsw: core_acl_flex_actions: Add L4_PORT_ACTIONPetr Machata
Add fields related to L4_PORT_ACTION, which is used for changing of TCP and UDP port numbers. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-22mlxsw: spectrum: Split handling of pedit mangle by chip typePetr Machata
Certain ACL actions are only available on some Spectrum revisions. In particular, L4_PORT_ACTION is not available on Spectrum-1. Introduce a new ops struct intended to hold these differences, mlxsw_sp_rulei_ops. Prime it with a sole member, act_mangle_field, meant for handling of pedit mangles. Create two ops structures, one for Spectrum-1, the other for Spectrum-2 and above. Add callbacks for act_mangle_field and dispatch to the common handler. Invoke mlxsw_sp_rulei_ops.act_mangle_field from the field mangler instead of calling the common handler directly. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-22mlxsw: spectrum: Do not rely on machine endiannessIdo Schimmel
The second commit cited below performed a cast of 'u32 buffsize' to '(u16 *)' when calling mlxsw_sp_port_headroom_8x_adjust(): mlxsw_sp_port_headroom_8x_adjust(mlxsw_sp_port, (u16 *) &buffsize); Colin noted that this will behave differently on big endian architectures compared to little endian architectures. Fix this by following Colin's suggestion and have the function accept and return 'u32' instead of passing the current size by reference. Fixes: da382875c616 ("mlxsw: spectrum: Extend to support Spectrum-3 ASIC") Fixes: 60833d54d56c ("mlxsw: spectrum: Adjust headroom buffers for 8x ports") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Colin Ian King <colin.king@canonical.com> Suggested-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19net: qos offload add flow status with dropped countPo Liu
This patch adds a drop frames counter to tc flower offloading. Reporting h/w dropped frames is necessary for some actions. Some actions like police action and the coming introduced stream gate action would produce dropped frames which is necessary for user. Status update shows how many filtered packets increasing and how many dropped in those packets. v2: Changes - Update commit comments suggest by Jiri Pirko. Signed-off-by: Po Liu <Po.Liu@nxp.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-16mlxsw: spectrum: Adjust headroom buffers for 8x portsIdo Schimmel
The port's headroom buffers are used to store packets while they traverse the device's pipeline and also to store packets that are egress mirrored. On Spectrum-3, ports with eight lanes use two headroom buffers between which the configured headroom size is split. In order to prevent packet loss, multiply the calculated headroom size by two for 8x ports. Fixes: da382875c616 ("mlxsw: spectrum: Extend to support Spectrum-3 ASIC") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-07mlxsw: core: Use different get_trend() callbacks for different thermal zonesVadim Pasternak
The driver registers three different types of thermal zones: For the ASIC itself, for port modules and for gearboxes. Currently, all three types use the same get_trend() callback which does not work correctly for the ASIC thermal zone. The callback assumes that the device data is of type 'struct mlxsw_thermal_module', whereas for the ASIC thermal zone 'struct mlxsw_thermal' is passed as device data. Fix this by using one get_trend() callback for the ASIC thermal zone and another for the other two types. Fixes: 6f73862fabd9 ("mlxsw: core: Add the hottest thermal zone detection") Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-01mlxsw: spectrum_trap: Register ACL control trapsIdo Schimmel
In a similar fashion to other control traps, register ACL control traps with devlink. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-01mlxsw: spectrum_trap: Register layer 3 control trapsIdo Schimmel
In a similar fashion to layer 2 control traps, register layer 3 control traps with devlink. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-01mlxsw: spectrum_trap: Register layer 2 control trapsIdo Schimmel
In a similar fashion to other traps, register layer 2 control traps with devlink. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-01mlxsw: spectrum_trap: Factor out common Rx listener functionIdo Schimmel
We currently have an Rx listener function for exception traps that marks received skbs with 'offload_fwd_mark' and injects them to the kernel's Rx path. The marking is done because all these exceptions occur during L3 forwarding, after the packets were potentially flooded at L2. A subsequent patch will add support for control traps. Packets received via some of these control traps need different handling: 1. Packets might not need to be marked with 'offload_fwd_mark'. For example, if packet was trapped before L2 forwarding 2. Packets might not need to be injected to the kernel's Rx path. For example, sampled packets are reported to user space via the psample module Factor out a common Rx listener function that only reports trapped packets to devlink. Call it from mlxsw_sp_rx_no_mark_listener() and mlxsw_sp_rx_mark_listener() that will inject the packets to the kernel's Rx path, without and with the marking, respectively. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-01mlxsw: spectrum_trap: Move layer 3 exceptions to exceptions trap groupIdo Schimmel
The layer 3 exceptions are still subject to the same trap policer, so nothing changes, but user space can choose to assign a different one. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27mlxsw: spectrum_router: remove redundant initialization of pointer br_devColin Ian King
The pointer br_dev is being initialized with a value that is never read and is being updated with a new value later on. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26mlxsw: spectrum_router: Allow programming link-local prefix routesIdo Schimmel
The device has a trap for IPv6 packets that need be routed and have a unicast link-local destination IP (i.e., fe80::/10). This allows mlxsw to ignore link-local routes, as the packets will be trapped to the CPU in any case. However, since link-local routes are not programmed, it is possible for routed packets to hit the default route which might also be programmed to trap packets. This means that packets with a link-local destination IP might be trapped for the wrong reason. To overcome this, allow programming link-local prefix routes (usually one fe80::/64 per-table), so that the packets will be forwarded until reaching the link-local trap. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26mlxsw: spectrum: Add packet traps for BFD packetsIdo Schimmel
Bidirectional Forwarding Detection (BFD) provides "low-overhead, short-duration detection of failures in the path between adjacent forwarding engines" (RFC 5880). This is accomplished by exchanging BFD packets between the two forwarding engines. Up until now these packets were trapped via the general local delivery (i.e., IP2ME) trap which also traps a lot of other packets that are not as time-sensitive as BFD packets. Expose dedicated traps for BFD packets so that user space could configure a dedicated policer for them. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26mlxsw: spectrum: Treat IPv6 link-local SIP as an exceptionIdo Schimmel
IPv6 packets that need to be forwarded and have a link-local source IP are dropped by the kernel and an ICMPv6 "Destination unreachable" is sent to the sending host. As such, change the trap group of such packets so that they do not interfere with IPv6 management packets. In the future this trap will be exposed as an exception via devlink-trap. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-10-01 11:55:14 +0000