summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/mellanox
AgeCommit message (Collapse)Author
2023-08-02net/mlx5: fs_core: Make find_closest_ft more genericJianbo Liu
As find_closest_ft_recursive is called to find the closest FT, the first parameter of find_closest_ft can be changed from fs_prio to fs_node. Thus this function is extended to find the closest FT for the nodes of any type, not only prios, but also the sub namespaces. Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/d3962c2b443ec8dde7a740dc742a1f052d5e256c.1690803944.git.leonro@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-02net/mlx5e: Make TC and IPsec offloads mutually exclusive on a netdevJianbo Liu
For IPsec packet offload mode, the order of TC offload and IPsec offload on the same netdevice is not aligned with the order in the non-offload software. For example, for RX, the software performs TC first and then IPsec transformation, but the implementation for offload does that in the opposite way. To resolve the difference for now, either IPsec offload or TC offload, not both, is allowed for a specific interface. Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/8e2e5e3b0984d785066e8663aaf97b3ba1bb873f.1690802064.git.leon@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-02net/mlx5e: Add get IPsec offload stats for uplink representorJianbo Liu
As IPsec offload is supported in switchdev mode, HW stats can be can be obtained from uplink rep. Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/b43c91c452f1db9c35c10639a029aa10fd8b7895.1690802064.git.leon@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-02net/mlx5e: Modify and restore TC rules for IPSec TX rulesJianbo Liu
After IPsec policy/state TX rules are added, any TC flow rule, which forwards packets to uplink, is modified to forward to IPsec TX tables. As these tables are destroyed dynamically, whenever there is no reference to them, the destinations of this kind of rules must be restored to uplink. There is a special case for packet encapsulation, as the packet_reformat_id in the extended destination is used to reformat packets, but only for the VPORT destination. To forward packet to IPsec table and do encapsulation in one FTE, move the packet_reformat_id to flow context, instead of using the extended destination. As a limitation, multiple encapsulations with table forwarding, and one together with other VPORT destinations, are not allowed, so add a check when offloading TC rules. TC rules are not allowed before IPsec TX rule is added, so only need to restore TC rules after flush IPSec TX rules. As they are saved in the vport_rep rhashtables, we walk all the rules in the rhashtables, and find TC rules with destinations pointing to IPsec tables, and modify them one by one. To avoid concurrent issue, this handling is done under the protection of eswitch mode_lock. Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/7bcb2c7e2ecf0e0d06b095c8dcc6a37ea7f02faf.1690802064.git.leon@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-02net/mlx5e: Make IPsec offload work together with eswitch and TCJianbo Liu
The eswitch mode is not allowed to change if there are any IPsec rules. Besides, by using mlx5_esw_try_lock() to get eswitch mode lock, IPsec rules are not allowed to be offloaded if there are any TC rules. Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/e442b512b21a931fbdfb87d57ae428c37badd58a.1690802064.git.leon@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-02net/mlx5: Compare with old_dest param to modify rule destinationJianbo Liu
The rule destination must be compared with the old_dest passed in. Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/24adc60d05d7492359ba343c6da1ebbe9fe284f6.1690802064.git.leon@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-02net/mlx5e: Support IPsec packet offload for TX in switchdev modeJianbo Liu
The IPsec encryption is done at the last, so add new prio for IPsec offload in FDB, and put it just lower than the slow path prio and higher than the per-vport prio. Three levels are added for TX. The first one is for ip xfrm policy. The sa table is created in the second level for ip xfrm state. The status table is created at the last to count the number of packets encrypted. The rules, which forward packets to uplink, are changed to forward them to IPsec TX tables first. These rules are restored after those tables are destroyed, which is done immediately when there is no reference to them, just as what does in legacy mode. The support for slow path is added here, by refreshing uplink's channels. But, the handling for TC fast path, which is more complicated, will be added later. Besides, reg c4 is used instead to match reqid. Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/cfd0e6ffaf0b8c55ebaa9fb0649b7c504b6b8ec6.1690802064.git.leon@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-02net/mlx5e: Refactor IPsec TX tables creationJianbo Liu
Add attribute for IPsec TX creation, pass all needed parameters in it, so tx_create() can be used by eswitch. Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/24d5ab988b0db2d39b7fde321b44ffe885d47828.1690802064.git.leon@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-02net/mlx5e: Handle IPsec offload for RX datapath in switchdev modeJianbo Liu
Reuse tun opts bits in reg c1, to pass IPsec obj id to datapath. As this is only for RX SA and there are only 11 bits, xarray is used to map IPsec obj id to an index, which is between 1 and 0x7ff, and replace obj id to write to reg c1. Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/43d60fbcc9cd672a97d7e2a2f7fe6a3d9e9a776d.1690802064.git.leon@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-02net/mlx5e: Support IPsec packet offload for RX in switchdev modeJianbo Liu
As decryption must be done first, add new prio for IPsec offload in FDB, and put it just lower than BYPASS prio and higher than TC prio. Three levels are added for RX. The first one is for ip xfrm policy. SA table is created in the second level for ip xfrm state. The status table is created in the last to check the decryption result. If success, packets continue with the next process, or dropped otherwise. For now, the set of reg c1 is removed for swtichdev mode, and the datapath process will be added in the next patch. Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/c91063554cf643fb50b99cf093e8a9bf11729de5.1690802064.git.leon@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-02net/mlx5e: Refactor IPsec RX tables creation and destructionJianbo Liu
Add attribute for IPsec RX creation, so rx_create() can be used by eswitch in later patch. And move the code for TTC dest connect/disconnect, which are needed only in NIC mode, to individual functions. Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/87478d928479b6a4eee41901204546ea05741815.1690802064.git.leon@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-02net/mlx5e: Prepare IPsec packet offload for switchdev modeJianbo Liu
As the uplink representor is created only in switchdev mode, add a local variable for IPsec to indicate the device is in this mode. In this mode, IPsec ROCE is disabled, and crypto offload is kept as it is. However, as the tables for packet offload are created in FDB, ipsec->rx_esw and ipsec->tx_esw are added. Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/ee242398f3b0a18007749fe79ff6ff19445a0280.1690802064.git.leon@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-02net/mlx5e: Change the parameter of IPsec RX skb handle functionJianbo Liu
Refactor the function to pass in reg B value only. Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/3b3c53f64660d464893eaecc41298b1ce49c6baa.1690802064.git.leon@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-02net/mlx5e: Add function to get IPsec offload namespaceJianbo Liu
Add function to get namespace in different directions. It will be extended for switchdev mode in later patch, but no functionality change for now. Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/ac2982c34f1ed3288d4670cacfd7e1b87a8c96d9.1690802064.git.leon@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-31net: flow_dissector: Use 64bits for used_keysRatheesh Kannoth
As 32bits of dissector->used_keys are exhausted, increase the size to 64bits. This is base change for ESP/AH flow dissector patch. Please find patch and discussions at https://lore.kernel.org/netdev/ZMDNjD46BvZ5zp5I@corigine.com/T/#t Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Tested-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-28Merge tag 'mlx5-updates-2023-07-24' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2023-07-24 1) Generalize devcom implementation to be independent of number of ports or device's GUID. 2) Save memory on command interface statistics. 3) General code cleanups * tag 'mlx5-updates-2023-07-24' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: Give esw_offloads_load/unload_rep() "mlx5_" prefix net/mlx5: Make mlx5_eswitch_load/unload_vport() static net/mlx5: Make mlx5_esw_offloads_rep_load/unload() static net/mlx5: Remove pointless devlink_rate checks net/mlx5: Don't check vport->enabled in port ops net/mlx5e: Make flow classification filters static net/mlx5e: Remove duplicate code for user flow net/mlx5: Allocate command stats with xarray net/mlx5: split mlx5_cmd_init() to probe and reload routines net/mlx5: Remove redundant cmdif revision check net/mlx5: Re-organize mlx5_cmd struct net/mlx5e: E-Switch, Allow devcom initialization on more vports net/mlx5e: E-Switch, Register devcom device with switch id key net/mlx5: Devcom, Infrastructure changes net/mlx5: Use shared code for checking lag is supported ==================== Link: https://lore.kernel.org/r/20230727183914.69229-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-28mlxsw: spectrum_router: IPv6 events: Use tracker helpers to hold & put ↵Petr Machata
netdevices Using the tracking helpers makes it easier to debug netdevice refcount imbalances when CONFIG_NET_DEV_REFCNT_TRACKER is enabled. Convert dev_hold() / dev_put() to netdev_hold() / netdev_put() in the router code that deals with IPv6 address events. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/f0af6ad4722b4ca6e598fd4fda8311a3041651ec.1690471775.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-28mlxsw: spectrum_router: RIF: Use tracker helpers to hold & put netdevicesPetr Machata
Using the tracking helpers makes it easier to debug netdevice refcount imbalances when CONFIG_NET_DEV_REFCNT_TRACKER is enabled. Convert dev_hold() / dev_put() to netdev_hold() / netdev_put() in the router code that deals with RIF allocation. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/8b7701a7b439ac268e4be4040eff99d01e27ae47.1690471775.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-28mlxsw: spectrum_router: hw_stats: Use tracker helpers to hold & put netdevicesPetr Machata
Using the tracking helpers makes it easier to debug netdevice refcount imbalances when CONFIG_NET_DEV_REFCNT_TRACKER is enabled. Convert dev_hold() / dev_put() to netdev_hold() / netdev_put() in the router code that deals with hw_stats events. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/b972314cfef4f4c24e66e60d13cffa5d606d1bf3.1690471774.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-28mlxsw: spectrum_router: FIB: Use tracker helpers to hold & put netdevicesPetr Machata
Using the tracking helpers makes it easier to debug netdevice refcount imbalances when CONFIG_NET_DEV_REFCNT_TRACKER is enabled. Convert dev_hold() / dev_put() to netdev_hold() / netdev_put() in the router code that deals with FIB events. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/5221a92e751c40447c55959f622267ccc999ed04.1690471774.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-28mlxsw: spectrum_switchdev: Use tracker helpers to hold & put netdevicesPetr Machata
Using the tracking helpers makes it easier to debug netdevice refcount imbalances when CONFIG_NET_DEV_REFCNT_TRACKER is enabled. Convert dev_hold() / dev_put() to netdev_hold() / netdev_put() in the switchdev module. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/774c3d7b5b0231f1435df2ec9dd660192e382756.1690471774.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-28mlxsw: spectrum_nve: Do not take reference when looking up netdevicePetr Machata
mlxsw_sp_nve_fid_disable() is always called under RTNL. It is therefore safe to call __dev_get_by_index() to get the netdevice pointer without bumping the reference count, because we can be sure the netdevice is not going away. That then obviates the need to put the netdevice later in the function. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/341d1046f89d8d839d9d00e4a3d58cdc351e9397.1690471774.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-28mlxsw: spectrum: Drop unused functions mlxsw_sp_port_lower_dev_hold/_put()Petr Machata
As of commit 151b89f6025a ("mlxsw: spectrum_router: Reuse work neighbor initialization in work scheduler"), the functions mlxsw_sp_port_lower_dev_hold() and mlxsw_sp_port_dev_put() have no users. Drop them. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/d0adcd7cb4ea19416294a0f861100edba84c9f36.1690471774.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-28net/mlx5: Fix flowhash key set/get for custom RSSJoe Damato
mlx5 flow hash field retrieval and set only worked on the default RSS context as of commit f01cc58c18d6 ("net/mlx5e: Support multiple RSS contexts"), not custom RSS contexts. For example, before this patch attempting to retrieve the flow hash fields for RSS context 1 fails: $ sudo ethtool -u eth1 rx-flow-hash tcp4 context 1 Cannot get RX network flow hashing options: Invalid argument This patch fixes getting and setting the flow hash fields for contexts other than the default context. Getting the flow hash fields for RSS context 1: $ sudo ethtool -u eth1 rx-flow-hash tcp4 context 1 For RSS context 1: TCP over IPV4 flows use these fields for computing Hash flow key: IP DA Now, setting the flash hash fields to a custom value: $ sudo ethtool -U eth1 rx-flow-hash tcp4 sdfn context 1 And retrieving them again: $ sudo ethtool -u eth1 rx-flow-hash tcp4 context 1 For RSS context 1: TCP over IPV4 flows use these fields for computing Hash flow key: IP SA IP DA L4 bytes 0 & 1 [TCP/UDP src port] L4 bytes 2 & 3 [TCP/UDP dst port] Signed-off-by: Joe Damato <jdamato@fastly.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-27net/mlx5: Give esw_offloads_load/unload_rep() "mlx5_" prefixJiri Pirko
As esw_offloads_load/unload_rep() are used outside eswitch.c it is nicer for them to have "mlx5_" prefix. Add it. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-27net/mlx5: Make mlx5_eswitch_load/unload_vport() staticJiri Pirko
mlx5_eswitch_load/unload_vport()() functions are not used outside of eswitch.c. Make them static. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-27net/mlx5: Make mlx5_esw_offloads_rep_load/unload() staticJiri Pirko
mlx5_esw_offloads_rep_load/unload() functions are not used outside of eswitch_offloads.c. Make them static. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-27net/mlx5: Remove pointless devlink_rate checksJiri Pirko
It is guaranteed that the devlink rate leaf is created during init paths. No need to check during cleanup. Remove the checks. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-27net/mlx5: Don't check vport->enabled in port opsJiri Pirko
vport->enabled is always set for a vport for which a devlink port is registered, therefore the checks in the ops are pointless. Remove those. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-27net/mlx5e: Make flow classification filters staticParav Pandit
Get and set flow classification filters are used in a single file. Hence, make them static. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-27net/mlx5e: Remove duplicate code for user flowParav Pandit
Flow table and priority detection is same for IP user flows and other L4 flows. Hence, use same code for all these flow types. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-27net/mlx5: Allocate command stats with xarrayShay Drory
Command stats is an array with more than 2K entries, which amounts to ~180KB. This is way more than actually needed, as only ~190 entries are being used. Therefore, replace the array with xarray. Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-27net/mlx5: split mlx5_cmd_init() to probe and reload routinesShay Drory
There is no need to destroy and allocate cmd SW structs during reload, this is time consuming for no reason. Hence, split mlx5_cmd_init() to probe and reload routines. Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-27net/mlx5: Remove redundant cmdif revision checkShay Drory
mlx5 is checking the cmdif revision twice, for no reason. Remove the latter check. Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-27net/mlx5: Re-organize mlx5_cmd structShay Drory
Downstream patch will split mlx5_cmd_init() to probe and reload routines. As a preparation, organize mlx5_cmd struct so that any field that will be used in the reload routine are grouped at new nested struct. Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-27net/mlx5e: E-Switch, Allow devcom initialization on more vportsRoi Dayan
New features could use the devcom interface but not necessarily the lag feature although for vport managers and ECPF still check for lag support. Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-27net/mlx5e: E-Switch, Register devcom device with switch id keyRoi Dayan
Register devcom devices with switch id instead of guid. Devcom interface is used to sync between ports in the eswitch, e.g. Adding miss rules between the ports. New eswitch devices could have the same guid but a different switch id so its more correct to group according to switch id which is the identifier if the ports are on the same eswitch. Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-27net/mlx5: Devcom, Infrastructure changesRoi Dayan
Update devcom infrastructure to be more generic, without depending on max supported ports definition or a device guid, and also more encapsulated so callers don't need to pass the register devcom component id per event call. Signed-off-by: Eli Cohen <elic@nvidia.com> Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-27net/mlx5: Use shared code for checking lag is supportedRoi Dayan
Move shared function to check lag is supported to lag header file. Signed-off-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-26net/mlx4: clean up a type issueDan Carpenter
These functions returns type bool, not pointers, so return false instead of NULL. Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/52d0814a-7287-4160-94b5-ac7939ac61c6@moroto.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-26mlxsw: core_env: Read transceiver module EEPROM in 128 bytes chunksIdo Schimmel
Old firmware versions could only read up to 48 bytes from a transceiver module's EEPROM in one go. Newer versions can read up to 128 bytes, resulting in fewer transactions. Query support for the new capability during driver initialization and if supported, read up to 128 bytes in one go. This is going to be especially useful for upcoming transceiver module firmware flashing support. Before: # perf stat -e devlink:devlink_hwmsg -- ethtool -m swp11 page 0x1 offset 128 length 128 i2c 0x50 [...] Performance counter stats for 'ethtool -m swp11 page 0x1 offset 128 length 128 i2c 0x50': 3 devlink:devlink_hwmsg After: # perf stat -e devlink:devlink_hwmsg -- ethtool -m swp11 page 0x1 offset 128 length 128 i2c 0x50 [...] Performance counter stats for 'ethtool -m swp11 page 0x1 offset 128 length 128 i2c 0x50': 1 devlink:devlink_hwmsg Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/99d1618e8cd5acefb2f795dfde1a5b41caa07dcb.1690281940.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-26mlxsw: reg: Increase Management Cable Info Access Register lengthIdo Schimmel
The layout of the register always supported 128 bytes payloads, but the driver defined the register with a shorter length because it uses a maximum payload size of 48 bytes. Increase the register's length in preparation for using 128 bytes payloads. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/ba5c0f631e2cfd61bd21218d0cbfe03fbfe521f9.1690281940.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-26mlxsw: reg: Remove unused function argumentIdo Schimmel
The 'lock' argument is always set to the default value of '0'. Remove it from the arguments list. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/fb5dd22830622ceeda1c2d6431c27fccd0687aca.1690281940.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-26mlxsw: reg: Add Management Capabilities Mask RegisterAmit Cohen
MCAM register reports the device supported management features. Querying this register exposes if features are supported with the current firmware version in the current ASIC. Then, the driver can separate between different implementations dynamically. MCAM register supports querying whether the MCIA register supports 128 bytes payloads or only 48 bytes. Add support for the register as preparation for allowing larger MCIA transactions. Note that the access to the bits in the field 'mng_feature_cap_mask' is not same to other mask fields in other registers. In most of the cases bit #0 is the first one in the last dword, in MCAM register, bits #0-#31 are in the first dword and so on. Declare the mask field using bits arrays per dword to simplify the access. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/1427a3f57ba93db1c5dd4f982bfb31dd5c82356e.1690281940.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-26mlxsw: reg: Move 'mpsc' definition in 'mlxsw_reg_infos'Amit Cohen
The array 'mlxsw_reg_infos' is ordered by registers' IDs. The ID of MPSC register is 0x9080, so it should be after MCDA (register ID 0x9063) and not after MTUTC (register ID 0x9055). Note that the register's fields are defined in the correct place in the file, only the definition in 'mlxsw_reg_infos' is wrong. This issue was found while adding new register which supposed to be before mpsc. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/c5e270cd5769f301fe81235622215143506e1b48.1690281940.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-26net/mlx5: Unregister devlink params in case interface is downShay Drory
Currently, in case an interface is down, mlx5 driver doesn't unregister its devlink params, which leads to this WARN[1]. Fix it by unregistering devlink params in that case as well. [1] [ 295.244769 ] WARNING: CPU: 15 PID: 1 at net/core/devlink.c:9042 devlink_free+0x174/0x1fc [ 295.488379 ] CPU: 15 PID: 1 Comm: shutdown Tainted: G S OE 5.15.0-1017.19.3.g0677e61-bluefield #g0677e61 [ 295.509330 ] Hardware name: https://www.mellanox.com BlueField SoC/BlueField SoC, BIOS 4.2.0.12761 Jun 6 2023 [ 295.543096 ] pc : devlink_free+0x174/0x1fc [ 295.551104 ] lr : mlx5_devlink_free+0x18/0x2c [mlx5_core] [ 295.561816 ] sp : ffff80000809b850 [ 295.711155 ] Call trace: [ 295.716030 ] devlink_free+0x174/0x1fc [ 295.723346 ] mlx5_devlink_free+0x18/0x2c [mlx5_core] [ 295.733351 ] mlx5_sf_dev_remove+0x98/0xb0 [mlx5_core] [ 295.743534 ] auxiliary_bus_remove+0x2c/0x50 [ 295.751893 ] __device_release_driver+0x19c/0x280 [ 295.761120 ] device_release_driver+0x34/0x50 [ 295.769649 ] bus_remove_device+0xdc/0x170 [ 295.777656 ] device_del+0x17c/0x3a4 [ 295.784620 ] mlx5_sf_dev_remove+0x28/0xf0 [mlx5_core] [ 295.794800 ] mlx5_sf_dev_table_destroy+0x98/0x110 [mlx5_core] [ 295.806375 ] mlx5_unload+0x34/0xd0 [mlx5_core] [ 295.815339 ] mlx5_unload_one+0x70/0xe4 [mlx5_core] [ 295.824998 ] shutdown+0xb0/0xd8 [mlx5_core] [ 295.833439 ] pci_device_shutdown+0x3c/0xa0 [ 295.841651 ] device_shutdown+0x170/0x340 [ 295.849486 ] __do_sys_reboot+0x1f4/0x2a0 [ 295.857322 ] __arm64_sys_reboot+0x2c/0x40 [ 295.865329 ] invoke_syscall+0x78/0x100 [ 295.872817 ] el0_svc_common.constprop.0+0x54/0x184 [ 295.882392 ] do_el0_svc+0x30/0xac [ 295.889008 ] el0_svc+0x48/0x160 [ 295.895278 ] el0t_64_sync_handler+0xa4/0x130 [ 295.903807 ] el0t_64_sync+0x1a4/0x1a8 [ 295.911120 ] ---[ end trace 4f1d2381d00d9dce ]--- Fixes: fe578cbb2f05 ("net/mlx5: Move devlink registration before mlx5_load") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Maher Sanalla <msanalla@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-26net/mlx5: DR, Fix peer domain namespace settingShay Drory
The offending patch is based on the assumption that for PFs, mlx5_get_dev_index() is the same as vhca_id. However, this assumption is wrong in case of DPU (ECPF). Fix it by using vhca_id directly, and switch the array of peers to xarray. Fixes: 6d5b7321d8af ("net/mlx5: DR, handle more than one peer domain") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-26net/mlx5: fs_chains: Fix ft prio if ignore_flow_level is not supportedChris Mi
The cited commit sets ft prio to fs_base_prio. But if ignore_flow_level it not supported, ft prio must be set based on tc filter prio. Otherwise, all the ft prio are the same on the same chain. It is invalid if ignore_flow_level is not supported. Fix it by setting ft prio based on tc filter prio and setting fs_base_prio to 0 for fdb. Fixes: 8e80e5648092 ("net/mlx5: fs_chains: Refactor to detach chains from tc usage") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-26net/mlx5e: kTLS, Fix protection domain in use syndrome when devlink reloadJianbo Liu
There are DEK objects cached in DEK pool after kTLS is used, and they are freed only in mlx5e_ktls_cleanup(). mlx5e_destroy_mdev_resources() is called in mlx5e_suspend() to free mdev resources, including protection domain (PD). However, PD is still referenced by the cached DEK objects in this case, because profile->cleanup() (and therefore mlx5e_ktls_cleanup()) is called after mlx5e_suspend() during devlink reload. So the following FW syndrome is generated: mlx5_cmd_out_err:803:(pid 12948): DEALLOC_PD(0x801) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0xef0c8a), err(-22) To avoid this syndrome, move DEK pool destruction to mlx5e_ktls_cleanup_tx(), which is called by profile->cleanup_tx(). And move pool creation to mlx5e_ktls_init_tx() for symmetry. Fixes: f741db1a5171 ("net/mlx5e: kTLS, Improve connection rate by using fast update encryption key") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-26net/mlx5: Bridge, set debugfs access right to root-onlyVlad Buslov
As suggested during code review set the access rights for bridge 'fdb' debugfs file to root-only. Fixes: 791eb78285e8 ("net/mlx5: Bridge, expose FDB state via debugfs") Reported-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/netdev/20230619120515.5045132a@kernel.org/ Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
generated by cgit (git 2.34.1) at 2025-10-02 16:12:58 +0000