summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)Author
2015-10-07i40e: stop VF ringsMitch Williams
Explicitly stop the rings belonging to each VF when disabling SR-IOV. Even though the VFs were gone, and the associated VSIs were removed, the rings were not stopped, and in some circumstances the hardware would continue to access the memory formerly used by the rings, causing memory corruption or DMAR errors, both of which would lead to general malaise of the kernel. To relieve this condition, explicitly stop all the rings associated with each VF before releasing its resources. Change-ID: I78c05d562c66e7b594b7e48d67860f49b3e5b6ec Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-07i40e: enable WoL operation if config bit show WoL capableShannon Nelson
The driver was disabling Wake-on-LAN by default and waiting for the user to expressly turn it on. This patch has the driver turning on WoL from the start if enabled in the hardware config, which matches the behavior of our other drivers. Change-ID: I43faedb907f8ba4d1a61b72a7c86072b97af12b1 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-07i40e: Increase the amount of time we wait for reset to be donePaul M Stillwell Jr
In some rare cases the reset can take longer to complete so increase the amount of time we wait. Change-ID: Ib5628ec54b526a811ee33d1214fe763226406671 Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-07gianfar: Add WAKE_UCAST and "wake-on-filer" supportClaudiu Manoil
This enables eTSEC's filer (Rx parser) and the FGPI Rx interrupt (Filer General Purpose Interrupt) as a wakeup source event. Upon entering suspend state, the eTSEC filer is given a rule to match incoming L2 unicast packets. A packet matching the rule will be enqueued in the Rx ring and a FGPI Rx interrupt will be asserted by the filer to wakeup the system. Other packet types will be dropped. On resume the filer table is restored to the content before entering suspend state. The set of rules from gfar_filer_config_wol() could be extended to implement other WoL capabilities as well. The "fsl,wake-on-filer" DT binding enables this capability on certain platforms that feature the necessary power management infrastructure, targeting mainly printing and imaging applications. (refer to Power Management section of the SoC Ref Man) Cc: Li Yang <leoli@freescale.com> Cc: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07i40e/i40evf: set AQ count after memory allocationMitch Williams
The standard way to check if the AQ is enabled is to look at the count field. So we should only set this field after we have successfully allocated memory. To do otherwise is to incite panic among the populace. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-10-03 This series contains updates to i40e and i40evf, some of which are to resolve more Red Hat bugzilla issues. Jiang Liu updates the i40e and i40evf drivers to use numa_mem_id() instead of numa_node_id() to get the nearest node with memory which better supports memoryless nodes. Anjali fixes an issue from Dan Carpenter <dan.carpenter@oracle.com>, to resolve a memory leak in X722 RSS configuration path, where we should free the memory allocated before exiting. Shannon modifies the drivers to ensure we have the spinlocks before we clear the ARQ and ASQ management registers. In addition, we widen the locked portion insert a sanity check to ensure we are working with safe register values. Mitch fixes an issue where under certain circumstances, we can get an extra VF_RESOURCES message from the PF driver at runtime. When this occurs, we need to parse it because our VSI may have changed and that will affect the relationship with the PF driver. But this parsing also blows away our current MAC address, so resolve the issue by restoring the current MAC address from the netdev struct after we parse the resource message. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-06Merge tag 'v4.3-rc4' into locking/core, to pick up fixes before applying new ↵Ingo Molnar
changes Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-06Revert "net: Microchip encx24j600 driver"David S. Miller
This reverts commit 04fbfce7a222327b97ca165294ef19f0faa45960.
2015-10-06Revert "net: encx24j600_exit() can be static"David S. Miller
This reverts commit 9886ce2b9d4e5a8bb3d78d0f7eff3c0f1ed58d67.
2015-10-05amd-xgbe: Check for successful buffer allocation before useTom Lendacky
The kasprintf function can return NULL if the allocation fails. Check for successful allocation before attempting to use the returned buffer. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05i40e: fix offload of GRE tunnelsJesse Brandeburg
The driver still was not offloading TSO on GRE tunnels because it forgot to set the GSO_GRE flag, causing lots of retransmits. This fixes generic GRE traffic (like a tunnel added like below) whereas before it would get 1Gb/s or less, now on a 10G adapter it gets 8.7Gb/s. ip ad ad 11.1.0.2/24 dev ens2f0 ip l set ens2f0 up ip link add gre2 type gretap remote 11.1.0.1 local 11.1.0.2 dev ens2f0 ip l set gre2 up ip ad ad 192.168.124.2/24 dev gre2 ping 192.168.124.1 netperf -H 192.168.124.1 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05net: encx24j600_exit() can be statickbuild test robot
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05net: Microchip encx24j600 driverJon Ringle
This ethernet driver supports the Micorchip enc424j600/626j600 Ethernet controller over a SPI bus interface. This driver makes use of the regmap API to optimize access to registers by caching registers where possible. Datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/39935b.pdf Signed-off-by: Jon Ringle <jringle@gridpoint.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05enic: do hang reset only in case of tx timeoutGovindarajulu Varadarajan
The current code invokes hang reset in case of error interrupt. We should hang reset only in case of tx timeout. This because of the way hang reset is implemented in firmware. Hang reset takes more firmware resources than soft reset. Adaptor does not generate error interrupt in case of tx timeout. Hang reset only in case of tx timeout, in .ndo_tx_timeout. Do soft reset otherwise. Introduce deferred work, enic_tx_hang_reset, to do hang reset. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05enic: handle spurious error interruptGovindarajulu Varadarajan
Some of the enic adaptors are know to generate spurious interrupts. When error interrupt is generated, driver just resets the device. This patch resets the device only when an error is occurred. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05cxgb4: Report correct link speed for unsupported onesHariprasad Shenai
When we get garbage from the firmware with weird Port Speeds, etc. we should emit a warning regarding unsupported speeds rather than use the bogus default of "10Mbps" which isn't even an option in the firmware Port Information message Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05cxgb4: Adds a new Device Log Facility FW_DEVLOG_FACILITY_CFHariprasad Shenai
The firmware team added a new Device Log Facility FW_DEVLOG_FACILITY_CF, but the driver has been decoding Device Log messages with that Facility as "(NULL)", fixing it. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05cxgb4: For T4, don't read the Firmware Mailbox Control registerHariprasad Shenai
T4 doesn't have the Shadow copy of the register which we can read without side effect. So don't read mbox control register for T4 adapter Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05cxgb4 : Update T4/T5/T6 register rangesHariprasad Shenai
Update T4/T5/T6 adapter register ranges so that it doesn't read non existent registers when dumped using ethtool Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05net: lpc_eth: fix warnings caused by enabling unprepared clockVladimir Zapolskiy
If common clock framework is configured, the driver generates warnings, which are fixed by this change: WARNING: CPU: 0 PID: 1 at linux/drivers/clk/clk.c:727 clk_core_enable+0x2c/0xa4() Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.3.0-rc2+ #141 Hardware name: LPC32XX SoC (Flattened Device Tree) Backtrace: [<>] (dump_backtrace) from [<>] (show_stack+0x18/0x1c) [<>] (show_stack) from [<>] (dump_stack+0x20/0x28) [<>] (dump_stack) from [<>] (warn_slowpath_common+0x90/0xb8) [<>] (warn_slowpath_common) from [<>] (warn_slowpath_null+0x24/0x2c) [<>] (warn_slowpath_null) from [<>] (clk_core_enable+0x2c/0xa4) [<>] (clk_core_enable) from [<>] (clk_enable+0x24/0x38) [<>] (clk_enable) from [<>] (lpc_eth_drv_probe+0xfc/0x99c) [<>] (lpc_eth_drv_probe) from [<>] (platform_drv_probe+0x50/0xa0) [<>] (platform_drv_probe) from [<>] (driver_probe_device+0x18c/0x408) [<>] (driver_probe_device) from [<>] (__driver_attach+0x70/0x94) [<>] (__driver_attach) from [<>] (bus_for_each_dev+0x74/0x98) [<>] (bus_for_each_dev) from [<>] (driver_attach+0x20/0x28) [<>] (driver_attach) from [<>] (bus_add_driver+0x11c/0x248) [<>] (bus_add_driver) from [<>] (driver_register+0xa4/0xe8) [<>] (driver_register) from [<>] (__platform_driver_register+0x50/0x64) [<>] (__platform_driver_register) from [<>] (lpc_eth_driver_init+0x18/0x20) [<>] (lpc_eth_driver_init) from [<>] (do_one_initcall+0x11c/0x1dc) [<>] (do_one_initcall) from [<>] (kernel_init_freeable+0x10c/0x1d4) [<>] (kernel_init_freeable) from [<>] (kernel_init+0x10/0xec) [<>] (kernel_init) from [<>] (ret_from_fork+0x14/0x24) Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05amd-xgbe: Remove the XGBE_LINK state bitLendacky, Thomas
The XGBE_LINK bit is used just to determine whether to call the netif_carrier_on/off functions. Rather than define and use this bit, just call the functions. The netif_carrier_ok function can be used in place of checking the XGBE_LINK bit in the future. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05amd-xgbe: Use device workqueue instead of system workqueueLendacky, Thomas
The driver creates, flushes and destroys a device workqueue but queues work to the system workqueue. Switch from using the system workqueue to the device workqueue. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05amd-xgbe: Add receive buffer unavailable statisticLendacky, Thomas
Add a statistic that tracks how many times an interrupt is generated for a receive buffer not being available to the hardware which prevents the hardware from being able to DMA the received data. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05amd-xgbe: Simplify calculation and setting of queue fifosLendacky, Thomas
The calculation of the Tx and Rx fifo sizes can be calculated rather than hardcoded in a switch statement. Additionally, the per-queue fifo sizes can be calculated rather than hardcoded using if/else if statements that can possibly underutilize the available fifo area. Change the code to calculate the fifo sizes and the per-queue fifo sizes to simplify the code and make best use of the available fifo. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05amd-xgbe: Add ethtool error and debug messagesLendacky, Thomas
Add error and dynamic debug messages to various ethtool functions in the driver while also removing the DBGPR debug print calls. Also, change the message level for some error messages from alert to err. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05amd-xgbe: Add ethtool support for setting the msglevelLendacky, Thomas
Provide the ethtool functions to support getting and setting the msglevel for the driver. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05amd-xgbe: Use proper DT / ACPI precedence checkingLendacky, Thomas
Device tree presence takes precedence over ACPI in the device_* APIs. The amd-xgbe driver should follow the same precedence. Update the check on whether to use DT / ACPI to follow this. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05amd-xgbe: Remove an unneeded semicolon on a switch statementLendacky, Thomas
Remove an unneeded semicolon at the end of a switch statement block. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05net: igb: avoid using timespecArnd Bergmann
We want to deprecate the use of 'struct timespec' on 32-bit architectures, as it is will overflow in 2038. The igb driver uses it to read the current time, and can simply be changed to use ktime_get_real_ts64() instead. Because of hardware limitations, there is still an overflow in year 2106, which we cannot really avoid, but this documents the overflow. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: intel-wired-lan@lists.osuosl.org Reviewed-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05net: stmmac: avoid using timespecArnd Bergmann
We want to deprecate the use of 'struct timespec' on 32-bit architectures, as it is will overflow in 2038. The stmmac driver uses it to read the current time, and can simply be changed to use ktime_get_real_ts64() instead. Because of hardware limitations, there is still an overflow in year 2106, which we cannot really avoid, but this documents the overflow. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Richard Cochran <richardcochran@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05net: fec: avoid timespec useArnd Bergmann
The fec_ptp_enable_pps uses an open-coded implementation of ns_to_timespec, which will be removed eventually as it is not y2038-safe on 32-bit architectures. Two more instances of the same code in this file were already converted to use the safe ns_to_timespec64 in commit 6630514fcee ("ptp: fec: use helpers for converting ns to timespec"), this changes the last one as well. The seconds portion here is actually unused and we could just remove the timespec variable, but using ns_to_timespec64 can still be better as the implementation can be hand-optimized in the future. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Fugang Duan <b38611@freescale.com> Cc: Luwei Zhou <b45643@freescale.com> Cc: Frank Li <Frank.Li@freescale.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05amd-xgbe: fix potential memory leak in xgbe-debugfsGeliang Tang
Added kfree() to avoid the memory leak when debugfs_create_dir() fails. Signed-off-by: Geliang Tang <geliangtang@163.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-04debugfs: Pass bool pointer to debugfs_create_bool()Viresh Kumar
Its a bit odd that debugfs_create_bool() takes 'u32 *' as an argument, when all it needs is a boolean pointer. It would be better to update this API to make it accept 'bool *' instead, as that will make it more consistent and often more convenient. Over that bool takes just a byte. That required updates to all user sites as well, in the same commit updating the API. regmap core was also using debugfs_{read|write}_file_bool(), directly and variable types were updated for that to be bool as well. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-03i40evf: don't blow away MAC addressMitch Williams
Under certain circumstances, we can get an extra VF_RESOURCES message from the PF driver at runtime. When this happens, we need to parse it because our VSI may have changed out from underneath us, and that will affect our relationship with the PF driver. However, parsing the resources message also blows away our current MAC address in the hardware struct, usually with all zeros. When this happens, the next time the interface is opened, it will have no MAC address and will a) not work and b) complain. Fix this issue by restoring the current MAC address from the netdev struct after we parse the resource message. Change-ID: I6cd1b624fc20432f81dc901166c8de195b8e0e65 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-03i40e/i40evf: grab the AQ spinlocks before clearing registersShannon Nelson
Make sure we have the spinlocks before we clear the ARQ and ASQ management registers. Also, widen the locked portion and make a sanity check earlier in the send function to be sure we're working with safe register values. Change-ID: I34b56044b33461ed780f3d2de8d62826cdf933f9 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-03i40e: Fix a memory leak in X722 rss config pathAnjali Singhai
In any case free the memory allocated before exiting. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-03i40evf: Use numa_mem_id() to better support memoryless nodeJiang Liu
Function i40e_clean_rx_irq() tries to reuse memory pages allocated from the nearest node. To better support memoryless node, use numa_mem_id() instead of numa_node_id() to get the nearest node with memory. This change should only affect performance. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-03i40e: Use numa_mem_id() to better support memoryless nodeJiang Liu
Function i40e_clean_rx_irq() tries to reuse memory pages allocated from the nearest node. To better support memoryless node, use numa_mem_id() instead of numa_node_id() to get the nearest node with memory. This change should only affect performance. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-03Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-09-30 This series contains updates to i40e and i40evf only. Vasily Averin provides a couple of rtnl lock/unlock fixes for both i40e and i40evf. Shannon provides several updates and fixes, first fixes up a type clash in i40e_aq_rc_to_posix(), where the error codes are signed values, so we need to treat them as such. Then fixes up a padding issue where an extra byte is added in i40e_aqc_get_cee_dcb_cfg_v1_resp to directly acknowledge the padding. Updated i40e to keep debugfs register read and writes from accessing outside of the io-remapped space. Added support and device id for another 20 GbE device. Jesse fixes the transmit hand workaround code for ARM that was causing Tx hangs to still occur occasionally when there really was no hang. Then fixed the receive dropped counter to show up in netstat interface. Refactor the interrupt enable function since it was always making the caller add the base_vector from the VSI struct which is already passed to the function. Fix kbuild warnings found in 0day build infrastructure by adding a harmless cast to a dev_info(), also fix 32 bit build warnings found by sparse. Greg fixed a configuration error that results if a port VLAN is set for a VF before the VF driver is loaded, so that when the VF driver is loaded the port VLAN is ignored. Mitch fixes the use of QOS field consistently in i40e_ndo_set_vf_port_vlan(). Modified the init timing of the driver to increase stability on load/unload and SR-IOV enable/disable cycles. Anjali updates i40e to not collect VEB stats if they are disabled in the hardware for performance reasons. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03ravb: Add support for r8a7795 SoCKazuya Mizuguchi
This patch supports the r8a7795 SoC by: - Using two interrupts + One for E-MAC + One for everything else + Both can be handled by the existing common interrupt handler, which affords a simpler update to support the new SoC. In future some consideration may be given to implementing multiple interrupt handlers - Limiting the phy speed to 100Mbit/s for the new SoC; at this time it is not clear how this restriction may be lifted but I hope it will be possible as more information comes to light Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> [horms: reworked] Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03ravb: Provide dev parameter to DMA APIKazuya Mizuguchi
This patch is in preparation for using this driver on arm64 where the implementation of __dma_alloc_coherent fails if a device parameter is not provided. Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Masaru Nagai <masaru.nagai.vx@renesas.com> [horms: squashed into a single patch] Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03switchdev: push object ID back to object structureJiri Pirko
Suggested-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03switchdev: bring back switchdev_obj and use it as a generic object paramJiri Pirko
Replace "void *obj" with a generic structure. Introduce couple of helpers along that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03switchdev: rename switchdev_obj_fdb to switchdev_obj_port_fdbJiri Pirko
Make the struct name in sync with object id name. Suggested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03switchdev: rename switchdev_obj_vlan to switchdev_obj_port_vlanJiri Pirko
Make the struct name in sync with object id name. Suggested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03switchdev: rename SWITCHDEV_ATTR_* enum values to SWITCHDEV_ATTR_ID_*Jiri Pirko
To be aligned with obj. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03switchdev: rename SWITCHDEV_OBJ_* enum values to SWITCHDEV_OBJ_ID_*Jiri Pirko
Suggested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: net/dsa/slave.c net/dsa/slave.c simply had overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix regression in SKB partial checksum handling, from Pravin B Shalar. 2) Fix VLAN inside of VXLAN handling in i40e driver, from Jesse Brandeburg. 3) Cure softlockups during accept() in SCTP, from Karl Heiss. 4) MSG_PEEK should return multiple SKBs worth of data in AF_UNIX, from Aaron Conole. 5) IPV6 erroneously ignores output interface specifier in lookup key for route lookups, fix from David Ahern. 6) In Marvell DSA driver, forward unknown frames to CPU port, from Andrew Lunn. 7) Mission flow flag initializations in some code paths, from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: Initialize flow flags in input path net: dsa: fix preparation of a port STP update testptp: Silence compiler warnings on ppc64 net/mlx4: Handle return codes in mlx4_qp_attach_common dsa: mv88e6xxx: Enable forwarding for unknown to the CPU port skbuff: Fix skb checksum partial check. net: ipv6: Add RT6_LOOKUP_F_IFACE flag if oif is set net sysfs: Print link speed as signed integer bna: fix error handling af_unix: return data from multiple SKBs on recv() with MSG_PEEK flag af_unix: Convert the unix_sk macro to an inline function for type safety net: sctp: Don't use 64 kilobyte lookup table for four elements l2tp: protect tunnel->del_work by ref_count net/ibm/emac: bump version numbers for correct work with ethtool sctp: Prevent soft lockup when sctp_accept() is called during a timeout event sctp: Whitespace fix i40e/i40evf: check for stopped admin queue i40e: fix VLAN inside VXLAN r8169: fix handling rtl_readphy result net: hisilicon: fix handling platform_get_irq result
2015-10-01Merge tag 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma fixes from Doug Ledford: - Fixes for mlx5 related issues - Fixes for ipoib multicast handling * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: IB/ipoib: increase the max mcast backlog queue IB/ipoib: Make sendonly multicast joins create the mcast group IB/ipoib: Expire sendonly multicast joins IB/mlx5: Remove pa_lkey usages IB/mlx5: Remove support for IB_DEVICE_LOCAL_DMA_LKEY IB/iser: Add module parameter for always register memory xprtrdma: Replace global lkey with lkey local to PD
generated by cgit (git 2.34.1) at 2025-09-24 09:21:45 +0000