summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)Author
2015-12-03ixgbevf: Use a private workqueue to avoid certain possible hangsMark Rustad
Use a private workqueue to avoid hangs that were otherwise possible when performing stress tests, such as creating and destroying many VFS repeatedly. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Darin Miller <darin.j.miller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-03ixgbe: Use private workqueue to avoid certain possible hangsMark Rustad
Use a private workqueue to avoid hangs that were otherwise possible when performing stress tests, such as creating and destroying many VFS repeatedly. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Darin Miller <darin.j.miller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-03ixgbe: Add support for newer thermal alarmMark Rustad
The newer copper PHY implementation used with newer X550EM_x devices uses a different thermal alarm type than the earlier one. Make changes to support both types. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Darin Miller <darin.j.miller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-03ixgbe: Prevent KR PHY reset in ixgbe_init_phy_ops_x550emMark Rustad
This patch removes KR PHY reset from ixgbe_init_phy_ops_x550em, since this function is meant to initialize function pointers for the detected PHY type. Internal PHY reset was moved to ixgbe_setup_internal_phy_t_x550em which will now detect which mode the internal PHY operates in and set it up as required. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Darin Miller <darin.j.miller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-03i40e: trivial fixesJesse Brandeburg
1) remove duplicate include of tcp.h 2) put an ampersand at the end of a line instead of the beginning 3) remove a useless dev_info 4) match declaration of function to the implementation 5) repair incorrect comment 6) correct whitespace 7) remove unused define Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-03i40e/i40evf: Bump version to 1.4.7 for i40e and 1.4.3 for i40evfCatherine Sullivan
Bump. Change-ID: Id8c83c64c973349a722bab40d285ad8ded8c28f7 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-03i40e/i40evf: use logical operatorMitch Williams
We shouldn't be using a bitwise operator here; it's not a bitwise operation. Use a logical operator instead. Why doesn't c have a logical-or-and-assign operator? Change-ID: Id84f3ca884910bed7073c84b1e16a102e958d0de Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-03i40e: fix whitespaceMitch Williams
Operators should have spaces around them. Change-ID: I64735e9aa8618b9a5059a87ace1c999d6d3bfcfb Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-03i40e: Remove separate functions gathering XOFF Rx statsNeerav Parikh
The separate functions to gather Flow control Rx XOFF stats was to determine if the Tx for a queue was paused due to Link Flow Control(LFC) or Priority Flow Control(PFC). But, with recent change in the i40e driver the logic for checking th Tx hang has been removed and these functions don't do anything meaningful. Hence, there is no need to keep these separate functions to gather Rx XOFF stats for LFC or PFC. This patch removes these functions and moves the stat collection for XOFF Rx to the i40e_update_pf_stats() that collects all the PF stats. Change-ID: Iec1452dac3a6766f0d968e754cb407530d7c60cd Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-03i40e: remove CONFIG_I40E_VXLANJesse Brandeburg
Instead of having our own custom symbol, we can just rely on whether or not the kernel has the feature enabled. In this case use IS_ENABLED(CONFIG_VXLAN) in order to handle built-in or module in the current BKM way. Change-ID: I5890fbb518ff8ed6bb07c3362fb0a8a829f9b241 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-03i40e: use priv flags to control packet splitJesse Brandeburg
Ethtool priv flags implementation to enable or disable packet split, which is a hardware feature that inspects headers and will put headers in a separate DMA buffer from the payload data. The driver was automatically choosing to enable packet split in some cases and this gives the user the ability to turn it off/on explicitly. to query state: ethtool --show-priv-flags ethx to enable: ethtool --set-priv-flags ethx packet-split on to disable: ethtool --set-priv-flags ethx packet-split off Why would anyone want this? Because some environments benefit from header/data split in the receive buffer, and the driver defaults to one or the other depending on environment/kernel parameters. Why didn't you implement a generic ethtool control for this feature? Because Intel hardware is the only hardware that supports header/data split. Change-ID: I803121e1eecc9ccb2884031fd85dd1110b3af66d Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-03i40evf: use correct typesMitch Williams
Don't use uint32_t type the kernel. Use u32 instead. No functional change. Change-ID: I77bbf3b6464edaef747c7104b43534032a4dba63 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-03i40e: propagate properlyMitch Williams
i40e_sync_vsi_filters() is the surly teenager of this driver. It says it's going to report errors, but it doesn't actually do that most of the time. And when it does, it leaves a mess. Change this function to have a common exit point so it will properly release the busy lock on the VSI. Propagate errors to the callers. Finally, adjust a few callers to check for and deal with errors from this function. Change-ID: Ic6af4956491e72402ebb3c538a3c31a0ad7f8667 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-03i40evf: don't use atomic allocationMitch Williams
These allocations don't need to be at atomic level. GFP_KERNEL is fine and they'll reduce stress on the allocator when the system is starved for memory. Change-ID: I3561d0399a681de0ad25291b6c848b224c1fde12 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-03i40e: Fix memory leaks, sideband filter programmingKiran Patil
This patch fixes the memory leak which would be seen otherwise when user programs flow-director filter using ethtool (sideband filter programming). When ethtool is used to program flow directory filter, 'raw_buf' gets allocated and it is supposed to be freed as part of queue cleanup. But check of 'tx_buffer->skb' was preventing it from being freed. Change-ID: Ief4f0a1a32a653180498bf6e987c1b4342ab8923 Signed-off-by: Kiran Patil <kiran.patil@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-03i40e: Detection and recovery of TX queue hung logic moved to service_task ↵Kiran Patil
from tx_timeout This patch contains following changes: - detection and recovery logic (issue SW interrupt) has been moved to service_task from timeout function. - added some more debug info from tx_timeout. Logic to detect and recover TX queue hung is now two step process: - service_task detects TX queue hung and sets a bit(hung_detected) if it was not set. - if bit was set (means this is back-back hung condition detected), issue SW interrupt and clear the bit. - napi_poll clears the bit unconditionally since it cleans TX/RX queues. Change-ID: Ieed03a48927c845a988b3ff375090bf37caeb903 Signed-off-by: Kiran Patil <kiran.patil@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-03i40evf: remove duplicate stringMitch Williams
We already print the driver info string in probe, so don't print it again in init. No need to repeat. No need to repeat. Change-ID: Ief597997f580a8c54d5950e3a84c29f2075be66b Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-03i40evf: set real num queuesMitch Williams
Use the helper function to set the real number of RX queues, and also set the real number of TX queues. Change-ID: I67982799de3f248fb4158ccdc9b1a74385f42ddd Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-03i40evf: increase max number of queuesMitch Williams
Future devices will allow for more queue pairs, so allocate a netdev that can handle them. While we're at it, get rid of the separate MAX_TX/MAX_RX defines. Since we always get matched queue pairs, having these makes no sense. Change-ID: I0e3556cd9a962506e509eb7c0afa36b329e8cb51 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-02sfc: use ALIGN macro for aligning frame sizesJarod Wilson
Don't open-code it. CC: Solarflare linux maintainers <linux-net-drivers@solarflare.com> CC: Shradha Shah <sshah@solarflare.com> CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Acked-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02net: mvneta: enable setting custom TX IP checksum limitMarcin Wojtas
Since Armada 38x SoC can support IP checksum for jumbo frames only on a single port, it means that this feature should be enabled per-port, rather than for the whole SoC. This patch enables setting custom TX IP checksum limit by adding new optional property to the mvneta device tree node. If not used, by default 1600B is set for "marvell,armada-370-neta" and 9800B for other strings, which ensures backward compatibility. Binding documentation is updated accordingly. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02net: mvneta: fix error path for building skbMarcin Wojtas
In the actual RX processing, there is same error path for both descriptor ring refilling and building skb fails. This is not correct, because after successful refill, the ring is already updated with newly allocated buffer. Then, in case of build_skb() fail, hitherto code left the original buffer unmapped. This patch fixes above situation by swapping error check of skb build with DMA-unmap of original buffer. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Acked-by: Simon Guinot <simon.guinot@sequanux.org> Cc: <stable@vger.kernel.org> # v4.2+ Fixes a84e32894191 ("net: mvneta: fix refilling for Rx DMA buffers") Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02net: mvneta: fix bit assignment for RX packet irq enableMarcin Wojtas
A value originally defined in the driver was inappropriate. Even though the ingress was somehow working, writing MVNETA_RXQ_INTR_ENABLE_ALL_MASK to MVNETA_INTR_ENABLE didn't make any effect, because the bits [31:16] are reserved and read-only. This commit updates MVNETA_RXQ_INTR_ENABLE_ALL_MASK to be compliant with the controller's documentation. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network unit") Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02net: mvneta: fix bit assignment in MVNETA_RXQ_CONFIG_REGMarcin Wojtas
MVNETA_RXQ_HW_BUF_ALLOC bit which controls enabling hardware buffer allocation was mistakenly set as BIT(1). This commit fixes the assignment. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network unit") Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02net: mvneta: add configuration for MBUS windows access protectionMarcin Wojtas
This commit adds missing configuration of MBUS windows access protection in mvneta_conf_mbus_windows function - a dedicated variable for that purpose remained there unused since v3.8 initial mvneta support. Because of that the register contents were inherited from the bootloader. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network unit") Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02net: thunderx: Enable BGX LMAC's RX/TX only after VF is upSunil Goutham
Enable or disable BGX LMAC's RX/TX based on corresponding VF's status. If otherwise, when multiple LMAC's physical link is up then packets from all LMAC's whose corresponding VF is not yet initialized will get forwarded to VF0. This is due to VNIC's default configuration where CPI, RSSI e.t.c point to VF0/QSET0/RQ0. This patch will prevent multiple copies of packets on VF0. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02net: thunderx: Switchon carrier only upon interface link upSunil Goutham
Call netif_carrier_on() only if interface's link is up. Switching this on upon IFF_UP by default, is causing issues with ethernet channel bonding in LACP mode. Initial NETDEV_CHANGE notification was being skipped. Also fixed some issues with link/speed/duplex reporting via ethtool. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02net: thunderx: Set CQ timer threshold properlySunil Goutham
Properly set CQ timer threshold and also set it to 2us. With previous incorrect settings it was set to 0.5us which is too less. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02net: thunderx: Wait for delayed work to finish before destroying itThanneeru Srinivasulu
While VNIC or BGX driver teardown, wait for already scheduled delayed work to finish before destroying it. Signed-off-by: Thanneeru Srinivasulu <tsrinivasulu@caviumnetworks.com> Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02net: thunderx: Force to load octeon-mdio before bgx driver.Thanneeru Srinivasulu
Signed-off-by: Thanneeru Srinivasulu <tsrinivasulu@caviumnetworks.com> Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-01i40e: remove unused argumentJesse Brandeburg
With the final edition of the patches to remove sleeps from the driver's entry points, the grab_rtnl argument is no longer needed, so partially revert the commit that added it. Change-ID: Ib9778476242586cc9e58b670f5f48d415cb59003 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-01i40e: fix: do not sleep in netdev_opsJesse Brandeburg
The driver was being called by VLAN, bonding, teaming operations that expected to be able to hold locks like rcu_read_lock(). This causes the driver to be held to the requirement to not sleep, and was found by the kernel debug options for checking sleep inside critical section, and the locking validator. Change-ID: Ibc68c835f5ffa8ffe0638ffe910a66fc5649a7f7 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-01i40e/i40evf: Bump i40e version to 1.4.4 and i40evf to 1.4.1Catherine Sullivan
Bump. Change-ID: I00ebbb2e5e5572f947502b8f6db4d94f666d6b14 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-01i40evf: allocate ring structs dynamicallyMitch Williams
Instead of awkwardly keeping a fixed array of pointers in the adapter struct and then allocating ring structs individually, just keep a single pointer and allocate a single blob for the arrays. This simplifies code, shrinks the adapter structure, and future-proofs the driver by not limiting the number of rings we can handle. Change-ID: I31334ff911a6474954232cfe4bc98ccca3c769ff Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-01i40evf: allocate queue vectors dynamicallyMitch Williams
Change the queue_vector array from a statically-sized member of the adapter structure to a dynamically-allocated and -sized array. This reduces the size of the adapter structure, and allows us to support any number of queue vectors in the future without changing the code. Change-ID: I08dc622cb2f2ad01e832e51c1ad9b86524730693 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-01i40evf: quoth the VF driver, NevermoreMitch Williams
If, upon a midnight dreary, the PF returns ERR_PARAM when the VF is requesting resources, that's fatal. Either the firmware or NVM is badly, badly misconfigured, or this VF has been disabled due to a previous VF driver sending a bunch of bogus messages. Either way, there is no recovery from this. Don't ponder weak and weary, just quit. Change-ID: I09d9f16cc4ee7fec3b57646a289d33838c1c5bf5 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-01i40e: make error message more usefulMitch Williams
If we get an invalid message from a VF, we should tell the user which VF is being naughty, rather than making them guess. Change-ID: I9252cef7baea3d8584043ed6ff12619a94e2f99c Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-01i40e: fix confusing messageHelin Zhang
This patch fixes the confusing kernel message of enabled RSS size, by reporting it together with the hardware maximum RSS size. Change-ID: I64864dbfbc13beccc180a7871680def1f3d5a339 Signed-off-by: Helin Zhang <helin.zhang@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-01i40e: Update error messagingCarolyn Wyborny
This patch fixes an issue where adminq init failures always provided a message that NVM was newer than expected. This is not always the case for init_adminq failures. Without this patch, if adminq init fails for any reason, newer NVM message would be given. This problem is fixed by adding a check for that specific error condition and a different hopefully helpful message otherwise. Change-ID: Iaeaebee4e398989eae40bb70f943ab66a3a521a5 Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-01i40evf: add new fields to store user configuration of RSSHelin Zhang
This patch adds new fields to i40e_vsi to store user configured RSS config data and code to use it. Change-ID: Ic5d3db8d9df52182b560248f8cdca9c5c7546879 Signed-off-by: Helin Zhang <helin.zhang@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-01i40evf: create a generic get RSS functionHelin Zhang
There are two ways to get RSS, this patch implements two functions with the same input parameters, and creates a more generic function for getting RSS configuration. Change-ID: I12d3b712c21455d47dd0a5aae58fc9b7c680db59 Signed-off-by: Helin Zhang <helin.zhang@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-01i40evf: create a generic config RSS functionHelin Zhang
There are two ways to configure RSS, this patch adjusts those two functions with the same input parameters, and creates a more generic function for configuring RSS. Change-ID: Iace73bdeba4831909979bef221011060ab327f71 Signed-off-by: Helin Zhang <helin.zhang@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-01i40evf: rename VF adapter specific RSS functionHelin Zhang
This patch renames old VF adapter specific RSS function to clarify its scope. Change-ID: Ie5253083a44c677ebb7709a8a3a18402ad2dc6a6 Signed-off-by: Helin Zhang <helin.zhang@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-01i40e/i40evf: prefetch skb data on transmitJesse Brandeburg
Issue a prefetch for data early in the transmit path. This should not be generally needed for Tx traffic, but it helps immensely for pktgen workloads and should help for forwarding workloads as well. Change-ID: Iefee870c20599e0c4240e1d8637e4f16b625f83a Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-01i40e/i40evf: Fix RS bit update in Tx path and disable force WB workaroundAnjali Singhai Jain
This patch fixes the issue of forcing WB too often causing us to not benefit from NAPI. Without this patch we were forcing WB/arming interrupt too often taking away the benefits of NAPI and causing a performance impact. With this patch we disable force WB in the clean routine for X710 and XL710 adapters. X722 adapters do not enable interrupt to force a WB and benefit from WB_ON_ITR and hence force WB is left enabled for those adapters. For XL710 and X710 adapters if we have less than 4 packets pending a software Interrupt triggered from service task will force a WB. This patch also changes the conditions for setting RS bit as described in code comments. This optimizes when the HW does a tail bump amd when it does a WB. It also optimizes when we do a wmb. Change-ID: Id831e1ae7d3e2ec3f52cd0917b41ce1d22d75d9d Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-01i40e: rename rss_size to alloc_rss_size in i40e_pfHelin Zhang
This patch renames rss_size to alloc_rss_size in i40e_pf, which is clearer and avoids confusion. It also adds comments to the other related structure members to help clarify usage. Change-ID: Ia90090609d006ab589cb639975bb8a0af795d16f Signed-off-by: Helin Zhang <helin.zhang@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-01i40e: add new fields to store user configurationHelin Zhang
This patch adds new fields to i40e_vsi to store user configured RSS config data and code to use it. Signed-off-by: Helin Zhang <helin.zhang@intel.com> Change-ID: I73886469dca9e9f6b16d842182a87f3f4009f95d Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-01stmmac: support Reg_9 to get HW level informationGiuseppe CAVALLARO
For GMAC newer than 3.40a there is a new register (Reg_9) that provides the status of all modules of the transmit and receive paths and FIFO status. These can be exposed via ethtool. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-01qede: Add support for {get, set}_pauseparamSudarsana Kalluru
Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-01qede: Add support for nway_resetSudarsana Kalluru
Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-22 01:31:06 +0000