summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)Author
2023-11-13ice: realloc VSI stats arraysMichal Swiatkowski
Previously only case when queues amount is lower was covered. Implement realloc for case when queues amount is higher than previous one. Use krealloc() function and zero new allocated elements. It has to be done before ice_vsi_def_cfg(), because stats element for ring is set there. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: set Tx topology every time new repr is addedMichal Swiatkowski
It is needed to track correct Tx topology. Update it every time new representor is created or remove node in case of removing corresponding representor. Still clear all node when removing switchdev mode as part of Tx topology isn't related only to representors. Also clear ::rate_note value to prevent skipping this node next time Tx topology is created. Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: allow changing SWITCHDEV_CTRL VSI queuesMichal Swiatkowski
Implement mechanism to change number of queues for SWITCHDEV_CTRL VSI type. Value from ::req_txq/rxq will be written to ::alloc_txq/rxq after calling ice_vsi_rebuild(). Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: return pointer to representorMichal Swiatkowski
In follow up patches it will be easier to obtain created port representor pointer instead of the id. Without it the pattern from eswitch side will look like: - create PR - get PR based on the id Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: make representor code genericMichal Swiatkowski
Representor code needs to be independent from specific device type, like in this case VF. Make generic add / remove representor function and specific add VF / rem VF function. New device types will follow this scheme. In bridge offload code there is a need to get representor pointer based on VSI. Implement helper function to achieve that. Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: remove VF pointer reference in eswitch codeMichal Swiatkowski
Make eswitch code generic by removing VF pointer reference in functions. It is needed to support eswitch mode for other type of devices. Previously queue id used for Rx was based on VF number. Use ::q_id saved in port representor instead. After adding or removing port representor ::q_id value can change. It isn't good idea to iterate over representors list using this value. Use xa_find starting from the first one instead to get next port representor to remap. The number of port representors has to be equal to ::num_rx/tx_q. Warn if it isn't true. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: track port representors in xarrayMichal Swiatkowski
Instead of assuming that each VF has pointer to port representor save it in xarray. It will allow adding port representor for other device types. Drop reference to VF where it is use only to get port representor. Get it from xarray instead. The functions will no longer by specific for VF, rename them. Track id assigned by xarray in port representor structure. The id can't be used as ::q_id, because it is fixed during port representor lifetime. ::q_id can change after adding / removing other port representors. Side effect of removing VF pointer is that we are losing VF MAC information used in unrolling. Store it in port representor as parent MAC. Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: use repr instead of vf->reprMichal Swiatkowski
Extract repr from vf->repr as it is often use in the ice_repr_rem(). Remove meaningless clearing of q_vector and netdev pointers as kfree is called on repr pointer. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: track q_id in representorMichal Swiatkowski
Previously queue index of control plane VSI used by port representor was always id of VF. If we want to allow adding port representors for different devices we have to track queue index in the port representor structure. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: remove unused control VSI parameterMichal Swiatkowski
It isn't used in ice_eswitch_release_reprs(). Probably leftover. Remove it. Commit that has removed usage of ctrl_vsi: commit c1e5da5dd465 ("ice: improve switchdev's slow-path") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: remove redundant max_vsi_num variableMichal Swiatkowski
It is a leftover from previous implementation. Accidentally it wasn't removed. Do it now. Commit that has removed it: commit c1e5da5dd465 ("ice: improve switchdev's slow-path") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: rename switchdev to eswitchMichal Swiatkowski
Eswitch is used as a prefix for related functions. Main structure storing all data related to eswitch should also be named as eswitch instead of ice_switchdev_info. Rename it. Also rename switchdev to eswitch where the context is not about eswitch mode. ::uplink_netdev was changed to netdev for simplicity. There is no other netdev in function scope so it is obvious. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: fix DDP package download for packages without signature segmentDan Nowlin
Commit 3cbdb0343022 ("ice: Add support for E830 DDP package segment") incorrectly removed support for package download for packages without a signature segment. These packages include the signature buffer inline in the configurations buffers, and not in a signature segment. Fix package download by providing download support for both packages with (ice_download_pkg_with_sig_seg()) and without signature segment (ice_download_pkg_without_sig_seg()). Fixes: 3cbdb0343022 ("ice: Add support for E830 DDP package segment") Reported-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Closes: https://lore.kernel.org/netdev/ZUT50a94kk2pMGKb@boxer/ Tested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Dan Nowlin <dan.nowlin@intel.com> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: dpll: fix output pin capabilitiesArkadiusz Kubalewski
The dpll output pins which are used to feed clock signal of PHY and MAC circuits cannot be disconnected, those integrated circuits require clock signal for operation. By stopping assignment of DPLL_PIN_CAPABILITIES_STATE_CAN_CHANGE pin capability, prevent the user from invoking the state set callback on those pins, setting the state on those pins already returns error, as firmware doesn't allow the change of their state. Fixes: d7999f5ea64b ("ice: implement dpll interface to control cgu") Fixes: 8a3a565ff210 ("ice: add admin commands to access cgu configuration") Reviewed-by: Andrii Staikov <andrii.staikov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: dpll: fix check for dpll input priority rangeArkadiusz Kubalewski
Supported priority value for input pins may differ with regard of NIC firmware version. E810T NICs with 3.20/4.00 FW versions would accept priority range 0-31, where firmware 4.10+ would support the range 0-9 and extra value of 255. Remove the in-range check as the driver has no information on supported values from the running firmware, let firmware decide if given value is correct and return extack error if the value is not supported. Fixes: d7999f5ea64b ("ice: implement dpll interface to control cgu") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13ice: dpll: fix initial lock status of dpllArkadiusz Kubalewski
When dpll device is registered and dpll subsystem performs notify of a new device, the lock state value provided to dpll subsystem equals 0 which is invalid value for the `enum dpll_lock_status`. Provide correct value by obtaining it from firmware before registering the dpll device. Fixes: d7999f5ea64b ("ice: implement dpll interface to control cgu") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-13net: mvneta: fix calls to page_pool_get_statsSven Auhagen
Calling page_pool_get_stats in the mvneta driver without checks leads to kernel crashes. First the page pool is only available if the bm is not used. The page pool is also not allocated when the port is stopped. It can also be not allocated in case of errors. The current implementation leads to the following crash calling ethstats on a port that is down or when calling it at the wrong moment: ble to handle kernel NULL pointer dereference at virtual address 00000070 [00000070] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Hardware name: Marvell Armada 380/385 (Device Tree) PC is at page_pool_get_stats+0x18/0x1cc LR is at mvneta_ethtool_get_stats+0xa0/0xe0 [mvneta] pc : [<c0b413cc>] lr : [<bf0a98d8>] psr: a0000013 sp : f1439d48 ip : f1439dc0 fp : 0000001d r10: 00000100 r9 : c4816b80 r8 : f0d75150 r7 : bf0b400c r6 : c238f000 r5 : 00000000 r4 : f1439d68 r3 : c2091040 r2 : ffffffd8 r1 : f1439d68 r0 : 00000000 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 066b004a DAC: 00000051 Register r0 information: NULL pointer Register r1 information: 2-page vmalloc region starting at 0xf1438000 allocated at kernel_clone+0x9c/0x390 Register r2 information: non-paged memory Register r3 information: slab kmalloc-2k start c2091000 pointer offset 64 size 2048 Register r4 information: 2-page vmalloc region starting at 0xf1438000 allocated at kernel_clone+0x9c/0x390 Register r5 information: NULL pointer Register r6 information: slab kmalloc-cg-4k start c238f000 pointer offset 0 size 4096 Register r7 information: 15-page vmalloc region starting at 0xbf0a8000 allocated at load_module+0xa30/0x219c Register r8 information: 1-page vmalloc region starting at 0xf0d75000 allocated at ethtool_get_stats+0x138/0x208 Register r9 information: slab task_struct start c4816b80 pointer offset 0 Register r10 information: non-paged memory Register r11 information: non-paged memory Register r12 information: 2-page vmalloc region starting at 0xf1438000 allocated at kernel_clone+0x9c/0x390 Process snmpd (pid: 733, stack limit = 0x38de3a88) Stack: (0xf1439d48 to 0xf143a000) 9d40: 000000c0 00000001 c238f000 bf0b400c f0d75150 c4816b80 9d60: 00000100 bf0a98d8 00000000 00000000 00000000 00000000 00000000 00000000 9d80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9da0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9dc0: 00000dc0 5335509c 00000035 c238f000 bf0b2214 01067f50 f0d75000 c0b9b9c8 9de0: 0000001d 00000035 c2212094 5335509c c4816b80 c238f000 c5ad6e00 01067f50 9e00: c1b0be80 c4816b80 00014813 c0b9d7f0 00000000 00000000 0000001d 0000001d 9e20: 00000000 00001200 00000000 00000000 c216ed90 c73943b8 00000000 00000000 9e40: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9e60: 00000000 c0ad9034 00000000 00000000 00000000 00000000 00000000 00000000 9e80: 00000000 00000000 00000000 5335509c c1b0be80 f1439ee4 00008946 c1b0be80 9ea0: 01067f50 f1439ee3 00000000 00000046 b6d77ae0 c0b383f0 00008946 becc83e8 9ec0: c1b0be80 00000051 0000000b c68ca480 c7172d00 c0ad8ff0 f1439ee3 cf600e40 9ee0: 01600e40 32687465 00000000 00000000 00000000 01067f50 00000000 00000000 9f00: 00000000 5335509c 00008946 00008946 00000000 c68ca480 becc83e8 c05e2de0 9f20: f1439fb0 c03002f0 00000006 5ac3c35a c4816b80 00000006 b6d77ae0 c030caf0 9f40: c4817350 00000014 f1439e1c 0000000c 00000000 00000051 01000000 00000014 9f60: 00003fec f1439edc 00000001 c0372abc b6d77ae0 c0372abc cf600e40 5335509c 9f80: c21e6800 01015c9c 0000000b 00008946 00000036 c03002f0 c4816b80 00000036 9fa0: b6d77ae0 c03000c0 01015c9c 0000000b 0000000b 00008946 becc83e8 00000000 9fc0: 01015c9c 0000000b 00008946 00000036 00000035 010678a0 b6d797ec b6d77ae0 9fe0: b6dbf738 becc838c b6d186d7 b6baa858 40000030 0000000b 00000000 00000000 page_pool_get_stats from mvneta_ethtool_get_stats+0xa0/0xe0 [mvneta] mvneta_ethtool_get_stats [mvneta] from ethtool_get_stats+0x154/0x208 ethtool_get_stats from dev_ethtool+0xf48/0x2480 dev_ethtool from dev_ioctl+0x538/0x63c dev_ioctl from sock_ioctl+0x49c/0x53c sock_ioctl from sys_ioctl+0x134/0xbd8 sys_ioctl from ret_fast_syscall+0x0/0x1c Exception stack(0xf1439fa8 to 0xf1439ff0) 9fa0: 01015c9c 0000000b 0000000b 00008946 becc83e8 00000000 9fc0: 01015c9c 0000000b 00008946 00000036 00000035 010678a0 b6d797ec b6d77ae0 9fe0: b6dbf738 becc838c b6d186d7 b6baa858 Code: e28dd004 e1a05000 e2514000 0a00006a (e5902070) This commit adds the proper checks before calling page_pool_get_stats. Fixes: b3fc79225f05 ("net: mvneta: add support for page_pool_get_stats") Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Reported-by: Paulo Da Silva <Paulo.DaSilva@kyberna.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-13net: hns3: fix VF wrong speed and duplex issueJijie Shao
If PF is down, firmware will returns 10 Mbit/s rate and half-duplex mode when PF queries the port information from firmware. After imp reset command is executed, PF status changes to down, and PF will query link status and updates port information from firmware in a periodic scheduled task. However, there is a low probability that port information is updated when PF is down, and then PF link status changes to up. In this case, PF synchronizes incorrect rate and duplex mode to VF. This patch fixes it by updating port information before PF synchronizes the rate and duplex to the VF when PF changes to up. Fixes: 18b6e31f8bf4 ("net: hns3: PF add support for pushing link status to VFs") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-13net: hns3: fix VF reset fail issueJijie Shao
Currently the reset process in hns3 and firmware watchdog init process is asynchronous. We think firmware watchdog initialization is completed before VF clear the interrupt source. However, firmware initialization may not complete early. So VF will receive multiple reset interrupts and fail to reset. So we add delay before VF interrupt source and 5 ms delay is enough to avoid second reset interrupt. Fixes: 427900d27d86 ("net: hns3: fix the timing issue of VF clearing interrupt sources") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-13net: hns3: fix variable may not initialized problem in hns3_init_mac_addr()Yonglong Liu
When a VF is calling hns3_init_mac_addr(), get_mac_addr() may return fail, then the value of mac_addr_temp is not initialized. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-13net: hns3: fix out-of-bounds access may occur when coalesce info is read via ↵Yonglong Liu
debugfs The hns3 driver define an array of string to show the coalesce info, but if the kernel adds a new mode or a new state, out-of-bounds access may occur when coalesce info is read via debugfs, this patch fix the problem. Fixes: c99fead7cb07 ("net: hns3: add debugfs support for interrupt coalesce") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-13net: hns3: fix incorrect capability bit display for copper portJian Shen
Currently, the FEC capability bit is default set for device version V2. It's incorrect for the copper port. Eventhough it doesn't make the nic work abnormal, but the capability information display in debugfs may confuse user. So clear it when driver get the port type inforamtion. Fixes: 433ccce83504 ("net: hns3: use FEC capability queried from firmware") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-13net: hns3: add barrier in vf mailbox reply processYonglong Liu
In hclgevf_mbx_handler() and hclgevf_get_mbx_resp() functions, there is a typical store-store and load-load scenario between received_resp and additional_info. This patch adds barrier to fix the problem. Fixes: 4671042f1ef0 ("net: hns3: add match_id to check mailbox response from PF to VF") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-13net: hns3: fix add VLAN fail issueJian Shen
The hclge_sync_vlan_filter is called in periodic task, trying to remove VLAN from vlan_del_fail_bmap. It can be concurrence with VLAN adding operation from user. So once user failed to delete a VLAN id, and add it again soon, it may be removed by the periodic task, which may cause the software configuration being inconsistent with hardware. So add mutex handling to avoid this. user hns3 driver periodic task │ add vlan 10 ───── hns3_vlan_rx_add_vid │ │ (suppose success) │ │ │ del vlan 10 ───── hns3_vlan_rx_kill_vid │ │ (suppose fail,add to │ │ vlan_del_fail_bmap) │ │ │ add vlan 10 ───── hns3_vlan_rx_add_vid │ (suppose success) │ foreach vlan_del_fail_bmp del vlan 10 Fixes: fe4144d47eef ("net: hns3: sync VLAN filter entries when kill VLAN ID failed") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-11net: ti: icssg-prueth: Fix error cleanup on failing pruss_request_mem_regionJan Kiszka
We were just continuing in this case, surely not desired. Fixes: 128d5874c082 ("net: ti: icssg-prueth: Add ICSSG ethernet driver") Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-11net: ti: icssg-prueth: Add missing icss_iep_put to error pathJan Kiszka
Analogously to prueth_remove, just also taking care for NULL'ing the iep pointers. Fixes: 186734c15886 ("net: ti: icssg-prueth: add packet timestamping and ptp support") Fixes: 443a2367ba3c ("net: ti: icssg-prueth: am65x SR2.0 add 10M full duplex support") Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: MD Danish Anwar <danishanwar@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-09Merge tag 'net-6.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter and bpf. Current release - regressions: - sched: fix SKB_NOT_DROPPED_YET splat under debug config Current release - new code bugs: - tcp: - fix usec timestamps with TCP fastopen - fix possible out-of-bounds reads in tcp_hash_fail() - fix SYN option room calculation for TCP-AO - tcp_sigpool: fix some off by one bugs - bpf: fix compilation error without CGROUPS - ptp: - ptp_read() should not release queue - fix tsevqs corruption Previous releases - regressions: - llc: verify mac len before reading mac header Previous releases - always broken: - bpf: - fix check_stack_write_fixed_off() to correctly spill imm - fix precision tracking for BPF_ALU | BPF_TO_BE | BPF_END - check map->usercnt after timer->timer is assigned - dsa: lan9303: consequently nested-lock physical MDIO - dccp/tcp: call security_inet_conn_request() after setting IP addr - tg3: fix the TX ring stall due to incorrect full ring handling - phylink: initialize carrier state at creation - ice: fix direction of VF rules in switchdev mode Misc: - fill in a bunch of missing MODULE_DESCRIPTION()s, more to come" * tag 'net-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits) net: ti: icss-iep: fix setting counter value ptp: fix corrupted list in ptp_open ptp: ptp_read should not release queue net_sched: sch_fq: better validate TCA_FQ_WEIGHTS and TCA_FQ_PRIOMAP net: kcm: fill in MODULE_DESCRIPTION() net/sched: act_ct: Always fill offloading tuple iifidx netfilter: nat: fix ipv6 nat redirect with mapped and scoped addresses netfilter: xt_recent: fix (increase) ipv6 literal buffer length ipvs: add missing module descriptions netfilter: nf_tables: remove catchall element in GC sync path netfilter: add missing module descriptions drivers/net/ppp: use standard array-copy-function net: enetc: shorten enetc_setup_xdp_prog() error message to fit NETLINK_MAX_FMTMSG_LEN virtio/vsock: Fix uninit-value in virtio_transport_recv_pkt() r8169: respect userspace disabling IFF_MULTICAST selftests/bpf: get trusted cgrp from bpf_iter__cgroup directly bpf: Let verifier consider {task,cgroup} is trusted in bpf_iter_reg net: phylink: initialize carrier state at creation test/vsock: add dobule bind connect test test/vsock: refactor vsock_accept ...
2023-11-09net: ti: icss-iep: fix setting counter valueDiogo Ivo
Currently icss_iep_set_counter() writes the upper 32-bits of the counter value to both the lower and upper counter registers, so fix this by writing the appropriate value to the lower register. Fixes: c1e0230eeaab ("net: ti: icss-iep: Add IEP driver") Signed-off-by: Diogo Ivo <diogo.ivo@siemens.com> Link: https://lore.kernel.org/r/20231107120037.1513546-1-diogo.ivo@siemens.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-08Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-11-06 (ice) This series contains updates to ice driver only. Dave removes SR-IOV LAG attribute for only the interface being disabled to allow for proper unwinding of all interfaces. Michal Schmidt changes some LAG allocations from GFP_KERNEL to GFP_ATOMIC due to non-allowed sleeping. Aniruddha and Marcin fix redirection and drop rules for switchdev by properly setting and marking egress/ingress type. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: Fix VF-VF direction matching in drop rule in switchdev ice: Fix VF-VF filter rules in switchdev mode ice: lag: in RCU, use atomic allocation ice: Fix SRIOV LAG disable on non-compliant aggregate ==================== Link: https://lore.kernel.org/r/20231107004844.655549-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-08Merge branch '40GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-11-06 (i40e) This series contains updates to i40e driver only. Ivan Vecera resolves a couple issues with devlink; removing a call to devlink_port_type_clear() and ensuring devlink port is unregistered after the net device. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: i40e: Fix devlink port unregistering i40e: Do not call devlink_port_type_clear() ==================== Link: https://lore.kernel.org/r/20231107003600.653796-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-07net: enetc: shorten enetc_setup_xdp_prog() error message to fit ↵Vladimir Oltean
NETLINK_MAX_FMTMSG_LEN NETLINK_MAX_FMTMSG_LEN is currently hardcoded to 80, and we provide an error printf-formatted string having 96 characters including the terminating \0. Assuming each %d (representing a queue) gets replaced by a number having at most 2 digits (a reasonable assumption), the final string is also 96 characters wide, which is too much. Reduce the verbiage a bit by removing some (partially) redundant words, which makes the new printf-formatted string be 73 characters wide with the trailing newline. Fixes: 800db2d125c2 ("net: enetc: ensure we always have a minimum number of TXQs for stack") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/lkml/202311061336.4dsWMT1h-lkp@intel.com/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20231106160311.616118-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-07r8169: respect userspace disabling IFF_MULTICASTHeiner Kallweit
So far we ignore the setting of IFF_MULTICAST. Fix this and clear bit AcceptMulticast if IFF_MULTICAST isn't set. Note: Based on the implementations I've seen it doesn't seem to be 100% clear what a driver is supposed to do if IFF_ALLMULTI is set but IFF_MULTICAST is not. This patch is based on the understanding that IFF_MULTICAST has precedence. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/4a57ba02-d52d-4369-9f14-3565e6c1f7dc@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-07tg3: Fix the TX ring stallAlex Pakhunov
The TX ring maintained by the tg3 driver can end up in the state, when it has packets queued for sending but the NIC hardware is not informed, so no progress is made. This leads to a multi-second interruption in network traffic followed by dev_watchdog() firing and resetting the queue. The specific sequence of steps is: 1. tg3_start_xmit() is called at least once and queues packet(s) without updating tnapi->prodmbox (netdev_xmit_more() returns true) 2. tg3_start_xmit() is called with an SKB which causes tg3_tso_bug() to be called. 3. tg3_tso_bug() determines that the SKB is too large, ... if (unlikely(tg3_tx_avail(tnapi) <= frag_cnt_est)) { ... stops the queue, and returns NETDEV_TX_BUSY: netif_tx_stop_queue(txq); ... if (tg3_tx_avail(tnapi) <= frag_cnt_est) return NETDEV_TX_BUSY; 4. Since all tg3_tso_bug() call sites directly return, the code updating tnapi->prodmbox is skipped. 5. The queue is stuck now. tg3_start_xmit() is not called while the queue is stopped. The NIC is not processing new packets because tnapi->prodmbox wasn't updated. tg3_tx() is not called by tg3_poll_work() because the all TX descriptions that could be freed has been freed: /* run TX completion thread */ if (tnapi->hw_status->idx[0].tx_consumer != tnapi->tx_cons) { tg3_tx(tnapi); 6. Eventually, dev_watchdog() fires triggering a reset of the queue. This fix makes sure that the tnapi->prodmbox update happens regardless of the reason tg3_start_xmit() returned. Signed-off-by: Alex Pakhunov <alexey.pakhunov@spacex.com> Signed-off-by: Vincent Wong <vincent.wong2@spacex.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-06idpf: fix potential use-after-free in idpf_tso()Eric Dumazet
skb_cow_head() can change skb->head (and thus skb_shinfo(skb)) We must not cache skb_shinfo(skb) before skb_cow_head(). Fixes: 6818c4d5b3c2 ("idpf: add splitq start_xmit") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Joshua Hay <joshua.a.hay@intel.com> Cc: Alan Brady <alan.brady@intel.com> Cc: Madhu Chittim <madhu.chittim@intel.com> Cc: Phani Burra <phani.r.burra@intel.com> Cc: Sridhar Samudrala <sridhar.samudrala@intel.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Cc: Tony Nguyen <anthony.l.nguyen@intel.com> Cc: Bailey Forrest <bcf@google.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231103200451.514047-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-06tg3: power down device only on SYSTEM_POWER_OFFGeorge Shuklin
Dell R650xs servers hangs on reboot if tg3 driver calls tg3_power_down. This happens only if network adapters (BCM5720 for R650xs) were initialized using SNP (e.g. by booting ipxe.efi). The actual problem is on Dell side, but this fix allows servers to come back alive after reboot. Signed-off-by: George Shuklin <george.shuklin@gmail.com> Fixes: 2ca1c94ce0b6 ("tg3: Disable tg3 device on system reboot to avoid triggering AER") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20231103115029.83273-1-george.shuklin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-06ice: Fix VF-VF direction matching in drop rule in switchdevMarcin Szycik
When adding a drop rule on a VF, rule direction is not being set, which results in it always being set to ingress (ICE_ESWITCH_FLTR_INGRESS equals 0). Because of this, drop rules added on port representors don't match any packets. To fix it, set rule direction in drop action to egress when netdev is a port representor, otherwise set it to ingress. Fixes: 0960a27bd479 ("ice: Add direction metadata") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-06ice: Fix VF-VF filter rules in switchdev modeAniruddha Paul
Any packet leaving VSI i.e VF's VSI is considered as egress traffic by HW, thus failing to match the added rule. Mark the direction for redirect rules as below: 1. VF-VF - Egress 2. Uplink-VF - Ingress 3. VF-Uplink - Egress 4. Link_Partner-Uplink - Ingress 5. Link_Partner-VF - Ingress Fixes: 0960a27bd479 ("ice: Add direction metadata") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Aniruddha Paul <aniruddha.paul@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-06ice: lag: in RCU, use atomic allocationMichal Schmidt
Sleeping is not allowed in RCU read-side critical sections. Use atomic allocations under rcu_read_lock. Fixes: 1e0f9881ef79 ("ice: Flesh out implementation of support for SRIOV on bonded interface") Fixes: 41ccedf5ca8f ("ice: implement lag netdev event handler") Fixes: 3579aa86fb40 ("ice: update reset path for SRIOV LAG support") Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-06ice: Fix SRIOV LAG disable on non-compliant aggregateDave Ertman
If an attribute of an aggregate interface disqualifies it from supporting SRIOV, the driver will unwind the SRIOV support. Currently the driver is clearing the feature bit for all interfaces in the aggregate, but this is not allowing the other interfaces to unwind successfully on driver unload. Only clear the feature bit for the interface that is currently unwinding. Fixes: bf65da2eb279 ("ice: enforce interface eligibility and add messaging for SRIOV LAG") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-06i40e: Fix devlink port unregisteringIvan Vecera
Ensure that devlink port is unregistered after unregistering of net device. Reproducer: [root@host ~]# rmmod i40e [ 4742.939386] i40e 0000:02:00.1: i40e_ptp_stop: removed PHC on enp2s0f1np1 [ 4743.059269] ------------[ cut here ]------------ [ 4743.063900] WARNING: CPU: 21 PID: 10766 at net/devlink/port.c:1078 devl_port_unregister+0x69/0x80 ... Fixes: 9e479d64dc58 ("i40e: Add initial devlink support") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-06i40e: Do not call devlink_port_type_clear()Ivan Vecera
Do not call devlink_port_type_clear() prior devlink port unregister and let devlink core to take care about it. Reproducer: [root@host ~]# rmmod i40e [ 4539.964699] i40e 0000:02:00.0: devlink port type for port 0 cleared without a software interface reference, device type not supported by the kernel? [ 4540.319811] i40e 0000:02:00.1: devlink port type for port 1 cleared without a software interface reference, device type not supported by the kernel? Fixes: 9e479d64dc58 ("i40e: Add initial devlink support") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-11-06octeontx2-pf: Free pending and dropped SQEsGeetha sowjanya
On interface down, the pending SQEs in the NIX get dropped or drained out during SMQ flush. But skb's pointed by these SQEs never get free or updated to the stack as respective CQE never get added. This patch fixes the issue by freeing all valid skb's in SQ SG list. Fixes: b1bc8457e9d0 ("octeontx2-pf: Cleanup all receive buffers in SG descriptor") Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-03net: ethernet: ti: am65-cpsw: rx_pause/tx_pause controls wrong directionRonald Wahl
The rx_pause flag says that whether we support receiving Pause frames. When a Pause frame is received TX is delayed for some time. This is TX flow control. In the same manner tx_pause is actually RX flow control. Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-03net: stmmac: xgmac: Enable support for multiple Flexible PPS outputsFurong Xu
From XGMAC Core 3.20 and later, each Flexible PPS has individual PPSEN bit to select Fixed mode or Flexible mode. The PPSEN must be set, or it stays in Fixed PPS mode by default. XGMAC Core prior 3.20, only PPSEN0(bit 4) is writable. PPSEN{1,2,3} are read-only reserved, and they are already in Flexible mode by default, our new code always set PPSEN{1,2,3} do not make things worse ;-) Fixes: 95eaf3cd0a90 ("net: stmmac: dwxgmac: Add Flexible PPS support") Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Furong Xu <0x1207@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-02Merge tag 'v6.7-p1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Add virtual-address based lskcipher interface - Optimise ahash/shash performance in light of costly indirect calls - Remove ahash alignmask attribute Algorithms: - Improve AES/XTS performance of 6-way unrolling for ppc - Remove some uses of obsolete algorithms (md4, md5, sha1) - Add FIPS 202 SHA-3 support in pkcs1pad - Add fast path for single-page messages in adiantum - Remove zlib-deflate Drivers: - Add support for S4 in meson RNG driver - Add STM32MP13x support in stm32 - Add hwrng interface support in qcom-rng - Add support for deflate algorithm in hisilicon/zip" * tag 'v6.7-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (283 commits) crypto: adiantum - flush destination page before unmapping crypto: testmgr - move pkcs1pad(rsa,sha3-*) to correct place Documentation/module-signing.txt: bring up to date module: enable automatic module signing with FIPS 202 SHA-3 crypto: asymmetric_keys - allow FIPS 202 SHA-3 signatures crypto: rsa-pkcs1pad - Add FIPS 202 SHA-3 support crypto: FIPS 202 SHA-3 register in hash info for IMA x509: Add OIDs for FIPS 202 SHA-3 hash and signatures crypto: ahash - optimize performance when wrapping shash crypto: ahash - check for shash type instead of not ahash type crypto: hash - move "ahash wrapping shash" functions to ahash.c crypto: talitos - stop using crypto_ahash::init crypto: chelsio - stop using crypto_ahash::init crypto: ahash - improve file comment crypto: ahash - remove struct ahash_request_priv crypto: ahash - remove crypto_ahash_alignmask crypto: gcm - stop using alignmask of ahash crypto: chacha20poly1305 - stop using alignmask of ahash crypto: ccm - stop using alignmask of ahash net: ipv6: stop checking crypto_ahash_alignmask ...
2023-11-02Merge tag 'sh-for-v6.7-tag1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux Pull sh updates from John Paul Adrian Glaubitz: "While the previously announced patch series for converting arch/sh to device trees is not yet ready for inclusion to mainline and therefore didn't make it for this pull request, there are still a small number changes for v6.7 which include one platform (board plus CPU and driver code) removal plus two fixes. The removal sent in by Arnd Bergmann concerns the microdev board which was an early SuperH prototype board that was never used in production. With the board removed, we were able to drop the now unused code for the SH4-202 CPU and well as the driver code for the superhyway bus and a custom implementation for ioport_map() and ioport_unmap() which will allow us to simplify ioport handling in the future. Another patch set by Geert Uytterhoeven revives SuperH BIOS earlyprintk support which got accidentally disabled in e76fe57447e88916 ("sh: Remove old early serial console code V2"), the second patch in the series updates the documentation. Finally, a patch by Masami Hiramatsu fixes a regression reported by the kernel test robot which uncovered that arch/sh is not implementing arch_cmpxchg_local() and therefore needs use __generic_cmpxchg_local() instead" * tag 'sh-for-v6.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux: locking/atomic: sh: Use generic_cmpxchg_local for arch_cmpxchg_local() Documentation: kernel-parameters: Add earlyprintk=bios on SH sh: bios: Revive earlyprintk support sh: machvec: Remove custom ioport_{un,}map() sh: Remove superhyway bus support sh: Remove unused SH4-202 support sh: Remove stale microdev board
2023-11-02Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma updates from Jason Gunthorpe: "Nothing exciting this cycle, most of the diffstat is changing SPDX 'or' to 'OR'. Summary: - Bugfixes for hns, mlx5, and hfi1 - Hardening patches for size_*, counted_by, strscpy - rts fixes from static analysis - Dump SRQ objects in rdma netlink, with hns support - Fix a performance regression in mlx5 MR deregistration - New XDR (200Gb/lane) link speed - SRQ record doorbell latency optimization for hns - IPSEC support for mlx5 multi-port mode - ibv_rereg_mr() support for irdma - Affiliated event support for bnxt_re - Opt out for the spec compliant qkey security enforcement as we discovered SW that breaks under enforcement - Comment and trivial updates" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (50 commits) IB/mlx5: Fix init stage error handling to avoid double free of same QP and UAF RDMA/mlx5: Fix mkey cache WQ flush RDMA/hfi1: Workaround truncation compilation error IB/hfi1: Fix potential deadlock on &irq_src_lock and &dd->uctxt_lock RDMA/core: Remove NULL check before dev_{put, hold} RDMA/hfi1: Remove redundant assignment to pointer ppd RDMA/mlx5: Change the key being sent for MPV device affiliation RDMA/bnxt_re: Fix clang -Wimplicit-fallthrough in bnxt_re_handle_cq_async_error() RDMA/hns: Fix init failure of RoCE VF and HIP08 RDMA/hns: Fix unnecessary port_num transition in HW stats allocation RDMA/hns: The UD mode can only be configured with DCQCN RDMA/hns: Add check for SL RDMA/hns: Fix signed-unsigned mixed comparisons RDMA/hns: Fix uninitialized ucmd in hns_roce_create_qp_common() RDMA/hns: Fix printing level of asynchronous events RDMA/core: Add support to set privileged QKEY parameter RDMA/bnxt_re: Do not report SRQ error in srq notification RDMA/bnxt_re: Report async events and errors RDMA/bnxt_re: Update HW interface headers IB/mlx5: Fix rdma counter binding for RAW QP ...
2023-11-02net: r8169: Disable multicast filter for RTL8168H and RTL8107EPatrick Thompson
RTL8168H and RTL8107E ethernet adapters erroneously filter unicast eapol packets unless allmulti is enabled. These devices correspond to RTL_GIGA_MAC_VER_46 and VER_48. Add an exception for VER_46 and VER_48 in the same way that VER_35 has an exception. Fixes: 6e1d0b898818 ("r8169:add support for RTL8168H and RTL8107E") Signed-off-by: Patrick Thompson <ptf@google.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/20231030205031.177855-1-ptf@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-02octeontx2-pf: Fix holes in error codeRatheesh Kannoth
Error code strings are not getting printed properly due to holes. Print error code as well. Fixes: 51afe9026d0c ("octeontx2-pf: NIX TX overwrites SQ_CTX_HW_S[SQ_INT]") Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Link: https://lore.kernel.org/r/20231027021953.1819959-2-rkannoth@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-02octeontx2-pf: Fix error codesRatheesh Kannoth
Some of error codes were wrong. Fix the same. Fixes: 51afe9026d0c ("octeontx2-pf: NIX TX overwrites SQ_CTX_HW_S[SQ_INT]") Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Link: https://lore.kernel.org/r/20231027021953.1819959-1-rkannoth@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-17 04:55:14 +0000