summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)Author
2020-09-03net: mvpp2: ensure the port is forced down while changing modesRussell King
Ensure that the port is forced down while reconfiguring, controlling this via mac_prepare() and mac_finish() so that it is down while we are configuring our (future) PCS. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-03net: mvpp2: convert to use mac_prepare()/mac_finish()Russell King
Convert mvpp2 to use the mac_prepare() and mac_finish() methods in preparation to converting mvpp2 to split-PCS support. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-03net: mvpp2: tidy up ACPI hackRussell King
Tidy up the ACPI hack so that we can minimise the function prototypes for this. This avoids adding further prototypes unnecessarily. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-03tg3: Fix soft lockup when tg3_reset_task() fails.Michael Chan
If tg3_reset_task() fails, the device state is left in an inconsistent state with IFF_RUNNING still set but NAPI state not enabled. A subsequent operation, such as ifdown or AER error can cause it to soft lock up when it tries to disable NAPI state. Fix it by bringing down the device to !IFF_RUNNING state when tg3_reset_task() fails. tg3_reset_task() running from workqueue will now call tg3_close() when the reset fails. We need to modify tg3_reset_task_cancel() slightly to avoid tg3_close() calling cancel_work_sync() to cancel tg3_reset_task(). Otherwise cancel_work_sync() will wait forever for tg3_reset_task() to finish. Reported-by: David Christensen <drc@linux.vnet.ibm.com> Reported-by: Baptiste Covolato <baptiste@arista.com> Fixes: db2199737990 ("tg3: Schedule at most one tg3_reset_task run") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-03mlxsw: core_hwmon: Extend hwmon interface with critical and emergency alarmsAmit Cohen
Add new attributes to hwmon object for exposing critical and emergency alarms. In case that current temperature is higher than emergency threshold, EMERGENCY alarm will be reported in sensors utility: $ sensors ... front panel 025: +55.0°C (crit = +35.0°C, emerg = +40.0°C) ALARM(EMERGENCY) In case that current temperature is higher than critical threshold, CRIT alarm will be reported in sensors utility: $ sensors ... front panel 025: +54.0°C (crit = +35.0°C, emerg = +80.0°C) ALARM(CRIT) Signed-off-by: Amit Cohen <amitc@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Acked-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-03mlxsw: core_hwmon: Calculate MLXSW_HWMON_ATTR_COUNT more accuratelyAmit Cohen
Currently the value of MLXSW_HWMON_ATTR_COUNT is calculated not really accurate. Add several defines to make the calculation clearer and easier to change. Calculate the precise high bound of number of attributes that may be needed. Signed-off-by: Amit Cohen <amitc@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-03mlxsw: core_hwmon: Split temperature querying from show functionsAmit Cohen
mlxsw_hwmon_module_temp_show(), mlxsw_hwmon_module_temp_critical_show() and mlxsw_hwmon_module_temp_emergency_show() query the relevant temperature from firmware and fill the value in provided buffers. Split the temperature querying functionality to individual get() functions and call them from the show() functions. The get() functions will be used by subsequent patches in the set. Signed-off-by: Amit Cohen <amitc@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-02nfp: flower: fix ABI mismatch between driver and firmwareLouis Peens
Fix an issue where the driver wrongly detected ipv6 neighbour updates from the NFP as corrupt. Add a reserved field on the kernel side so it is similar to the ipv4 version of the struct and has space for the extra bytes from the card. Fixes: 9ea9bfa12240 ("nfp: flower: support ipv6 tunnel keep-alive messages from fw") Signed-off-by: Louis Peens <louis.peens@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-02ionic: clarify boolean precedenceShannon Nelson
Add parenthesis to clarify a boolean usage. Pointed out in https://lore.kernel.org/lkml/202008060413.VgrMuqLJ%25lkp@intel.com/ Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-02ionic: remove unused variableShannon Nelson
Remove a vestigial variable. Pointed out in https://lore.kernel.org/lkml/20200806143735.GA9232@xsang-OptiPlex-9020/ Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-02ionic: clean adminq service routineShannon Nelson
The only thing calling ionic_napi any more is the adminq processing, so combine and simplify. Co-developed-by: Neel Patel <neel@pensando.io> Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-02ionic: clean up desc_info and cq_info structsShannon Nelson
Remove some unnecessary struct fields and related code. Co-developed-by: Neel Patel <neel@pensando.io> Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-02ionic: struct reorder for faster accessShannon Nelson
Move a few active struct fields to the front of the struct for a little better cache use and performance. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-02ionic: clean up page handling codeShannon Nelson
The internal page handling can be cleaned up by passing our local page struct rather than dma addresses, and by putting more of the mgmt code into the alloc and free routines. Co-developed-by: Neel Patel <neel@pensando.io> Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-02net: gemini: Fix another missing clk_disable_unprepare() in probeDan Carpenter
We recently added some calls to clk_disable_unprepare() but we missed the last error path if register_netdev() fails. I made a couple cleanups so we avoid mistakes like this in the future. First I reversed the "if (!ret)" condition and pulled the code in one indent level. Also, the "port->netdev = NULL;" is not required because "port" isn't used again outside this function so I deleted that line. Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-02net: bcmgenet: fix mask check in bcmgenet_validate_flow()Denis Efremov
VALIDATE_MASK(eth_mask->h_source) is checked twice in a row in bcmgenet_validate_flow(). Add VALIDATE_MASK(eth_mask->h_dest) instead. Fixes: 3e370952287c ("net: bcmgenet: add support for ethtool rxnfc flows") Signed-off-by: Denis Efremov <efremov@linux.com> Acked-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-02amd-xgbe: Add support for new port modeShyam Sundar S K
Add support for a new port mode that is a backplane connection without support for auto negotiation. Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-02RDMA/qedr: Fix reported max_pkeysKamal Heib
As qedr driver supports both RoCE and iWarp, make sure to set the max_pkeys only when running in RoCE mode. Link: https://lore.kernel.org/r/20200827141655.406185-1-kamalheib1@gmail.com Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Acked-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-01octeontx2-pf: Add UDP segmentation offload supportSunil Goutham
Defines UDP segmentation algorithm in hardware and supports offloading UDP segmentation. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-01dpaa2-eth: add a dpaa2_eth_ prefix to all functions in dpaa2-eth-dcb.cIoana Ciornei
Some static functions in the dpaa2-eth driver don't have the dpaa2_eth_ prefix and this is becoming an inconvenience when looking at, for example, a perf top output and trying to determine easily which entries are dpaa2-eth related. Ammend this by adding the prefix to all the functions. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-01dpaa2-eth: add a dpaa2_eth_ prefix to all functions in dpaa2-eth.cIoana Ciornei
Some static functions in the dpaa2-eth driver don't have the dpaa2_eth_ prefix and this is becoming an inconvenience when looking at, for example, a perf top output and trying to determine easily which entries are dpaa2-eth related. Ammend this by adding the prefix to all the functions. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-01dpaa2-eth: add a dpaa2_eth_ prefix to all functions in dpaa2-ethtool.cIoana Ciornei
Some static functions in the dpaa2-eth driver don't have the dpaa2_eth_ prefix and this is becoming an inconvenience when looking at, for example, a perf top output and trying to determine easily which entries are dpaa2-eth related. Ammend this by adding the prefix to all the functions. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-01ibmvnic: Harden device Command Response Queue handshakeThomas Falcon
In some cases, the device or firmware may be busy when the driver attempts to perform the CRQ initialization handshake. If the partner is busy, the hypervisor will return the H_CLOSED return code. The aim of this patch is that, if the device is not ready, to query the device a number of times, with a small wait time in between queries. If all initialization requests fail, the driver will remain in a dormant state, awaiting a signal from the device that it is ready for operation. Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf-next 2020-09-01 The following pull-request contains BPF updates for your *net-next* tree. There are two small conflicts when pulling, resolve as follows: 1) Merge conflict in tools/lib/bpf/libbpf.c between 88a82120282b ("libbpf: Factor out common ELF operations and improve logging") in bpf-next and 1e891e513e16 ("libbpf: Fix map index used in error message") in net-next. Resolve by taking the hunk in bpf-next: [...] scn = elf_sec_by_idx(obj, obj->efile.btf_maps_shndx); data = elf_sec_data(obj, scn); if (!scn || !data) { pr_warn("elf: failed to get %s map definitions for %s\n", MAPS_ELF_SEC, obj->path); return -EINVAL; } [...] 2) Merge conflict in drivers/net/ethernet/mellanox/mlx5/core/en/xsk/rx.c between 9647c57b11e5 ("xsk: i40e: ice: ixgbe: mlx5: Test for dma_need_sync earlier for better performance") in bpf-next and e20f0dbf204f ("net/mlx5e: RX, Add a prefetch command for small L1_CACHE_BYTES") in net-next. Resolve the two locations by retaining net_prefetch() and taking xsk_buff_dma_sync_for_cpu() from bpf-next. Should look like: [...] xdp_set_data_meta_invalid(xdp); xsk_buff_dma_sync_for_cpu(xdp, rq->xsk_pool); net_prefetch(xdp->data); [...] We've added 133 non-merge commits during the last 14 day(s) which contain a total of 246 files changed, 13832 insertions(+), 3105 deletions(-). The main changes are: 1) Initial support for sleepable BPF programs along with bpf_copy_from_user() helper for tracing to reliably access user memory, from Alexei Starovoitov. 2) Add BPF infra for writing and parsing TCP header options, from Martin KaFai Lau. 3) bpf_d_path() helper for returning full path for given 'struct path', from Jiri Olsa. 4) AF_XDP support for shared umems between devices and queues, from Magnus Karlsson. 5) Initial prep work for full BPF-to-BPF call support in libbpf, from Andrii Nakryiko. 6) Generalize bpf_sk_storage map & add local storage for inodes, from KP Singh. 7) Implement sockmap/hash updates from BPF context, from Lorenz Bauer. 8) BPF xor verification for scalar types & add BPF link iterator, from Yonghong Song. 9) Use target's prog type for BPF_PROG_TYPE_EXT prog verification, from Udip Pant. 10) Rework BPF tracing samples to use libbpf loader, from Daniel T. Lee. 11) Fix xdpsock sample to really cycle through all buffers, from Weqaar Janjua. 12) Improve type safety for tun/veth XDP frame handling, from Maciej Żenczykowski. 13) Various smaller cleanups and improvements all over the place. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-01net: ethernet: mlx4: Fix memory allocation in mlx4_buddy_init()Shung-Hsi Yu
On machines with much memory (> 2 TByte) and log_mtts_per_seg == 0, a max_order of 31 will be passed to mlx_buddy_init(), which results in s = BITS_TO_LONGS(1 << 31) becoming a negative value, leading to kvmalloc_array() failure when it is converted to size_t. mlx4_core 0000:b1:00.0: Failed to initialize memory region table, aborting mlx4_core: probe of 0000:b1:00.0 failed with error -12 Fix this issue by changing the left shifting operand from a signed literal to an unsigned one. Fixes: 225c7b1feef1 ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters") Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-01liquidio: Remove unneeded cast from memory allocationYueHaibing
Remove unneeded return value cast. This is detected by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-01net: sungem: Remove unneeded cast from memory allocationYueHaibing
Remove dma_alloc_coherent return value cast. This is detected by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31net: ethernet: ti: am65-cpsw: fix rmii 100Mbit link modeGrygorii Strashko
In RMII link mode it's required to set bit 15 IFCTL_A in MAC_SL MAC_CONTROL register to enable support for 100Mbit link speed. Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31net: hns: Remove unused macro AE_NAME_PORT_ID_IDXYueHaibing
There is no caller in tree. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31net: dl2k: Remove unused macro DRV_NAMEYueHaibing
There is no caller in tree any more. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31net: ethernet: ti: am65-cpts: fix i2083 genf (and estf) Reconfiguration IssueGrygorii Strashko
The new bit TX_GENF_CLR_EN has been added in AM65x SR2.0 to fix i2083 errata, which can be just set unconditionally for all SoCs. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31sfc: return errors from efx_mcdi_set_id_led, and de-indirectEdward Cree
W=1 warnings indicated that 'rc' was unused in efx_mcdi_set_id_led(); change the function to return int instead of void and plumb the rc through the caller efx_ethtool_phys_id(). Since (post-Falcon) all sfc NICs use MCDI for this, there's no point in indirecting through a nic_type method, so remove that and just call efx_mcdi_set_id_led() directly. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31sfc: fix kernel-doc on struct efx_loopback_stateEdward Cree
Missing 'struct' keyword caused "cannot understand function prototype" warnings. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31sfc: fix unused-but-set-variable warning in efx_farch_filter_remove_safeEdward Cree
Thanks to some past refactor, 'spec' is not actually used in this function; the code using it moved to the callee efx_farch_filter_remove. Remove the variable to fix a W=1 warning. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31sfc: fix W=1 warnings in efx_farch_handle_rx_not_okEdward Cree
Some of these RX-event flags aren't used at all, so remove them. Others are used only #ifdef DEBUG to log a message; suppress the unused-var warnings #ifndef DEBUG with a void cast. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31cxgb4: fix thermal zone device registrationPotnuri Bharat Teja
When multiple adapters are present in the system, pci hot-removing second adapter leads to the following warning as both the adapters registered thermal zone device with same thermal zone name/type. Therefore, use unique thermal zone name during thermal zone device initialization. Also mark thermal zone dev NULL once unregistered. [ 414.370143] ------------[ cut here ]------------ [ 414.370944] sysfs group 'power' not found for kobject 'hwmon0' [ 414.371747] WARNING: CPU: 9 PID: 2661 at fs/sysfs/group.c:281 sysfs_remove_group+0x76/0x80 [ 414.382550] CPU: 9 PID: 2661 Comm: bash Not tainted 5.8.0-rc6+ #33 [ 414.383593] Hardware name: Supermicro X10SRA-F/X10SRA-F, BIOS 2.0a 06/23/2016 [ 414.384669] RIP: 0010:sysfs_remove_group+0x76/0x80 [ 414.385738] Code: 48 89 df 5b 5d 41 5c e9 d8 b5 ff ff 48 89 df e8 60 b0 ff ff eb cb 49 8b 14 24 48 8b 75 00 48 c7 c7 90 ae 13 bb e8 6a 27 d0 ff <0f> 0b 5b 5d 41 5c c3 0f 1f 00 0f 1f 44 00 00 48 85 f6 74 31 41 54 [ 414.388404] RSP: 0018:ffffa22bc080fcb0 EFLAGS: 00010286 [ 414.389638] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 414.390829] RDX: 0000000000000001 RSI: ffff8ee2de3e9510 RDI: ffff8ee2de3e9510 [ 414.392064] RBP: ffffffffbaef2ee0 R08: 0000000000000000 R09: 0000000000000000 [ 414.393224] R10: 0000000000000000 R11: 000000002b30006c R12: ffff8ee260720008 [ 414.394388] R13: ffff8ee25e0a40e8 R14: ffffa22bc080ff08 R15: ffff8ee2c3be5020 [ 414.395661] FS: 00007fd2a7171740(0000) GS:ffff8ee2de200000(0000) knlGS:0000000000000000 [ 414.396825] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 414.398011] CR2: 00007f178ffe5020 CR3: 000000084c5cc003 CR4: 00000000003606e0 [ 414.399172] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 414.400352] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 414.401473] Call Trace: [ 414.402685] device_del+0x89/0x400 [ 414.403819] device_unregister+0x16/0x60 [ 414.405024] hwmon_device_unregister+0x44/0xa0 [ 414.406112] thermal_remove_hwmon_sysfs+0x196/0x200 [ 414.407256] thermal_zone_device_unregister+0x1b5/0x1f0 [ 414.408415] cxgb4_thermal_remove+0x3c/0x4f [cxgb4] [ 414.409668] remove_one+0x212/0x290 [cxgb4] [ 414.410875] pci_device_remove+0x36/0xb0 [ 414.412004] device_release_driver_internal+0xe2/0x1c0 [ 414.413276] pci_stop_bus_device+0x64/0x90 [ 414.414433] pci_stop_and_remove_bus_device_locked+0x16/0x30 [ 414.415609] remove_store+0x75/0x90 [ 414.416790] kernfs_fop_write+0x114/0x1b0 [ 414.417930] vfs_write+0xcf/0x210 [ 414.419059] ksys_write+0xa7/0xe0 [ 414.420120] do_syscall_64+0x4c/0xa0 [ 414.421278] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 414.422335] RIP: 0033:0x7fd2a686afd0 [ 414.423396] Code: Bad RIP value. [ 414.424549] RSP: 002b:00007fffc1446148 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 414.425638] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007fd2a686afd0 [ 414.426830] RDX: 0000000000000002 RSI: 00007fd2a7196000 RDI: 0000000000000001 [ 414.427927] RBP: 00007fd2a7196000 R08: 000000000000000a R09: 00007fd2a7171740 [ 414.428923] R10: 00007fd2a7171740 R11: 0000000000000246 R12: 00007fd2a6b43400 [ 414.430082] R13: 0000000000000002 R14: 0000000000000001 R15: 0000000000000000 [ 414.431027] irq event stamp: 76300 [ 414.435678] ---[ end trace 13865acb4d5ab00f ]--- Fixes: b18719157762 ("cxgb4: Add thermal zone support") Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31hinic: add support to query function tableLuo bin
add debugfs node for querying function table, for example: cat /sys/kernel/debug/hinic/0000:15:00.0/func_table/valid Signed-off-by: Luo bin <luobin9@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31hinic: add support to query rq infoLuo bin
add debugfs node for querying rq info, for example: cat /sys/kernel/debug/hinic/0000:15:00.0/RQs/0x0/rq_hw_pi Signed-off-by: Luo bin <luobin9@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31hinic: add support to query sq infoLuo bin
add debugfs node for querying sq info, for example: cat /sys/kernel/debug/hinic/0000:15:00.0/SQs/0x0/sq_pi Signed-off-by: Luo bin <luobin9@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31ionic: fix txrx work accountingShannon Nelson
Take the tx accounting out of the work_done calculation to prevent a possible duplicate napi_schedule call when under high Tx stress but low Rx traffic. Fixes: b14e4e95f9ec ("ionic: tx separate servicing") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31xsk: i40e: ice: ixgbe: mlx5: Test for dma_need_sync earlier for better ↵Magnus Karlsson
performance Test for dma_need_sync earlier to increase performance. xsk_buff_dma_sync_for_cpu() takes an xdp_buff as parameter and from that the xsk_buff_pool reference is dug out. Perf shows that this dereference causes a lot of cache misses. But as the buffer pool is now sent down to the driver at zero-copy initialization time, we might as well use this pointer directly, instead of going via the xsk_buff and we can do so already in xsk_buff_dma_sync_for_cpu() instead of in xp_dma_sync_for_cpu. This gets rid of these cache misses. Throughput increases with 3% for the xdpsock l2fwd sample application on my machine. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Björn Töpel <bjorn.topel@intel.com> Link: https://lore.kernel.org/bpf/1598603189-32145-11-git-send-email-magnus.karlsson@intel.com
2020-08-31xsk: i40e: ice: ixgbe: mlx5: Rename xsk zero-copy driver interfacesMagnus Karlsson
Rename the AF_XDP zero-copy driver interface functions to better reflect what they do after the replacement of umems with buffer pools in the previous commit. Mostly it is about replacing the umem name from the function names with xsk_buff and also have them take the a buffer pool pointer instead of a umem. The various ring functions have also been renamed in the process so that they have the same naming convention as the internal functions in xsk_queue.h. This so that it will be clearer what they do and also for consistency. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Björn Töpel <bjorn.topel@intel.com> Link: https://lore.kernel.org/bpf/1598603189-32145-3-git-send-email-magnus.karlsson@intel.com
2020-08-31xsk: i40e: ice: ixgbe: mlx5: Pass buffer pool to driver instead of umemMagnus Karlsson
Replace the explicit umem reference passed to the driver in AF_XDP zero-copy mode with the buffer pool instead. This in preparation for extending the functionality of the zero-copy mode so that umems can be shared between queues on the same netdev and also between netdevs. In this commit, only an umem reference has been added to the buffer pool struct. But later commits will add other entities to it. These are going to be entities that are different between different queue ids and netdevs even though the umem is shared between them. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Björn Töpel <bjorn.topel@intel.com> Link: https://lore.kernel.org/bpf/1598603189-32145-2-git-send-email-magnus.karlsson@intel.com
2020-08-28ionic: pull reset_queues into tx_timeout handlerShannon Nelson
Convert tx_timeout handler to not do the full reset. As this was the last user of ionic_reset_queues(), we can drop it. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-28ionic: change queue count with no resetShannon Nelson
Add to our new ionic_reconfigure_queues() to also be able to change the number of queues in use, and to change the queue interrupt layout between split and combined. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-28ionic: change the descriptor ring length without full resetShannon Nelson
The original way of changing ring length was to completely tear down the lif's queue structure and then rebuild it, while running the risk of allocations that might fail in the middle and leave us with a broken driver. Instead, we can set up all the new queue and descriptor allocations first, then swap them out and delete the old allocations. If the new allocations fail, we report the error, stay with the old setup and continue running. This gives us a safer path, and a smaller window of time where we're not processing traffic. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-28ionic: change mtu without full queue rebuildShannon Nelson
We really don't need to tear down and rebuild the whole queue structure when changing the MTU; we can simply stop the queues, clean and refill, then restart the queues. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-28ionic: use index not pointer for queue trackingShannon Nelson
Use index counters rather than pointers for tracking head and tail in the queues to save a little memory and to perhaps slightly faster queue processing. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-28ionic: reduce contiguous memory allocation requirementShannon Nelson
Split out the queue descriptor blocks into separate dma allocations to make for smaller blocks. Co-developed-by: Neel Patel <neel@pensando.io> Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-28ionic: clean up unnecessary non-static functionsShannon Nelson
ionic_open() and ionic_stop() are not referenced outside of their defining file, so make them static. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-10-02 21:55:49 +0000