summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)Author
2011-10-19stmmac: use predefined macros for HW cap register fields (V4)Rayagond Kokatanur
Signed-off-by: Rayagond Kokatanur <rayagond@vayavyalabs.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19stmmac: allow mtu bigger than 1500 in case of normal desc (V4)Giuseppe CAVALLARO
This patch allows to set the mtu bigger than 1500 in case of normal descriptors. This is helping some SPEAr customers. Signed-off-by: Deepak SIKRI <deepak.sikri@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19stmmac: update the driver version and doc (V4)Giuseppe CAVALLARO
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19stmmac: protect tx process with lock (V4)Giuseppe CAVALLARO
This patch fixes a problem raised on Orly ARM SMP platform where, in case of fragmented frames, the descriptors in the TX ring resulted broken. This was due to a missing lock protection in the tx process. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19stmmac: Stop advertising 1000Base capabilties for non GMII iface (V4).Srinivas Kandagatla
This patch stops advertising 1000Base capablities if GMAC is either configured for MII or RMII mode and on board there is a GPHY plugged on. Without this patch if an GBit switch is connected on MII interface, Ethernet stops working at all. Discovered as part of https://bugzilla.stlinux.com/show_bug.cgi?id=14148 triage Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19mlx4_en: Updating driver versionYevgeny Petrilin
Driver version updated to 1.5.4.2 Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19mlx4_en: Adding rxhash supportYevgeny Petrilin
Moving to Toeplitz function in RSS calculation. Reporting rxhash in skb. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19mlx4_en: Recording rx queue for gro packetsYevgeny Petrilin
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19mlx4_en: Checksum counters per ringYevgeny Petrilin
Not updating common counters from data path. The checksum counters are per ring, summarizing them when collecting statistics. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19mlx4_en: Controlling FCS header removalYevgeny Petrilin
Canceling FCS removal where FW allows for better alignment of incoming data. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19mlx4: Fix vlan table overflowYevgeny Petrilin
Prevent overflow when trying to register more Vlans then the Vlan table in HW is configured to. Need to take into acount that the first 2 entries are reserved. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19net: add skb frag size accessorsEric Dumazet
To ease skb->truesize sanitization, its better to be able to localize all references to skb frags size. Define accessors : skb_frag_size() to fetch frag size, and skb_frag_size_{set|add|sub}() to manipulate it. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-18cs89x0: Move the driver into the Cirrus dirJeff Kirsher
The cs89x0 driver was initial placed in the apple/ when it should have been placed in the cirrus/. This resolves the issue by moving the dirver and fixing up the respective Kconfig(s) and Makefile(s). Thanks to Sascha for reporting the issue. -v2 Fix a config error that was introduced with v1 by removing the dependency on MACE for NET_VENDOR_APPLE. CC: Russell Nelson <nelson@crynwr.com> CC: Andrew Morton <akpm@linux-foundation.org> Reported-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-nextDavid S. Miller
2011-10-17ixgbe: change the eeprom version reported by ethtoolEmil Tantilov
Use 32bit value starting at offset 0x2d for displaying the firmware version in ethtool. This should work for all current ixgbe HW Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-17ehea: Remove unused tcp_end field in send WQAnton Blanchard
The tcp_end field is not actually used by the hardware, so there is no need to set it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Add GRO supportAnton Blanchard
Add GRO support to the ehea driver. v3: [cascardo] no need to enable GRO, since it's enabled by default [cascardo] vgrp was removed in the vlan cleanup Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Remove LRO supportAnton Blanchard
In preparation for adding GRO to ehea, remove LRO. v3: [cascardo] fixed conflict with vlan cleanup Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Add 64bit statisticsAnton Blanchard
Switch to using ndo_get_stats64 to get 64bit statistics. v3: [cascardo] use rtnl_link_stats64 as port stats Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Remove some unused definitionsAnton Blanchard
The queue macros are many levels deep and it makes it harder to work your way through them when many of the versions are unused. Remove the unused versions. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Simplify type 3 transmit routineAnton Blanchard
If a nonlinear skb fits within the immediate area, use skb_copy_bits instead of copying the frags by hand. v3: [cascardo] fixed conflict with use of skb frag API Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Merge swqe2 TSO and non TSO pathsAnton Blanchard
write_swqe2_TSO and write_swqe2_nonTSO are almost identical. For TSO we have to set the TSO and mss bits in the wqe and we only put the header in the immediate area, no data. Collapse both functions into write_swqe2_immediate. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Simplify ehea_xmit2 and ehea_xmit3Anton Blanchard
Based on a patch from Michael Ellerman, clean up a significant portion of the transmit path. There was a lot of duplication here. Even worse, we were always checksumming tx packets and ignoring the skb->ip_summed field. Also remove NETIF_F_FRAGLIST from dev->features, I'm not sure why it was enabled. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Allocate large enough skbs to avoid partial cacheline DMA writesAnton Blanchard
The ehea adapter has a mode where it will avoid partial cacheline DMA writes on receive by always padding packets to fall on a cacheline boundary. Unfortunately we currently aren't allocating enough space for a full ethernet MTU packet to be rounded up, so this optimisation doesn't hit. It's unfortunate that the next largest packet size exposed by the hypervisor interface is 2kB, meaning our skb allocation comes out of a 4kB SLAB. However the performance increase due to this optimisation is quite large and my TCP stream numbers increase from 900MB to 1000MB/sec. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Add vlan_featuresAnton Blanchard
We weren't enabling any VLAN features so we missed out on checksum offload and TSO when using VLANs. Enable them. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Dont check NETIF_F_TSO in TX pathAnton Blanchard
It seems like the ehea xmit routine and an ethtool change of TSO mode could race, resulting in corrupt packets. Checking gso_size is enough and we can use the helper function. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Remove num_tx_qps module optionAnton Blanchard
The num_tx_qps module option allows a user to configure a different number of tx and rx queues. Now the networking stack is multiqueue aware it makes little sense just to enable the tx queues and not the rx queues so remove the option. v3: [cascardo] fixed conflict with get_stats change Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Remove force_irq logic in napi poll routineAnton Blanchard
commit 18604c548545 (ehea: NAPI multi queue TX/RX path for SMP) added driver specific logic for exiting napi mode. I'm not sure what it was trying to solve and it should be up to the network stack to decide when we are done polling so remove it. v3: [cascardo] Fixed extra parentheses. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Update multiqueue supportAnton Blanchard
The ehea driver had some multiqueue support but was missing the last few years of networking stack improvements: - Use skb_record_rx_queue to record which queue an skb came in on. - Remove the driver specific netif_queue lock and use the networking stack transmit lock instead. - Remove the driver specific transmit queue hashing and use skb_get_queue_mapping instead. - Use netif_tx_{start|stop|wake}_queue where appropriate. We can also remove pr->queue_stopped and just check the queue status directly. - Print all 16 queues in the ethtool stats. We now enable multiqueue by default since it is a clear win on all my testing so far. v3: [cascardo] fixed use_mcs parameter description [cascardo] set ehea_ethtool_stats_keys as const Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Remove NETIF_F_LLTXAnton Blanchard
Remove the deprecated NETIF_F_LLTX feature. Since the network stack now provides the locking we can remove the driver specific pr->xmit_lock. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ixgbe: allow eeprom writes via ethtoolEmil Tantilov
Implement support for ethtool -E Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-17ixgbe: fix endianess when writing driver version to firmwareEmil Tantilov
This patch makes sure that register writes are in little endian and also converts the reads back to big-endian. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-17igb: Check if subordinate VFs are assigned to virtual machinesGreg Rose
Kvm and the Xen pci-back driver will set a flag in the virtual function pci device dev_flags when the VF is assigned to a guest VM. Before destroying subordinate VFs check to see if the flag is set and if so skip the call to pci_disable_sriov() to avoid system crashes. Copy the maintainer for the Xen pci-back driver. Also CC'ing maintainers of all drivers found to call pci_disable_sriov(). V2 - Fix uninitialized variable warning Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Christian Benvenuti <benve@cisco.com> Cc: Sathya Perla <sathya.perla@emulex.com> Cc: Dimitris Michailidis <dm@chelsio.com> Cc: Jon Mason <jdmason@kudzu.us> Cc: James Smart <james.smart@emulex.com> Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-17igbvf: Fix trunk vlanGreg Rose
Changes to clean up the VLAN Rx path by Jiri Pirko broke trunk VLAN. Trunk VLANs in a VF driver are those set using "ip link set <pfdev> vf <n> <vlanid>" Signed-off-by: Greg Rose <gregory.v.rose@intel.com> CC: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-16igbvf: convert to ndo_fix_featuresMichał Mirosław
Private rx_csum flags are now duplicate of netdev->features & NETIF_F_RXCSUM. Removing this needs deeper surgery. Things noticed: - HW VLAN acceleration probably can be toggled, but it's left as is - the resets on RX csum offload change can probably be avoided - there is A LOT of copy-and-pasted code here Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-16igb: enable l4 timestamping for v2 event packetsJacob Keller
When enabling hardware timestamping for ptp v2 event packets, the software does not setup the queue for l4 packets, although layer 4 packets are valid for v2. This patch adds the flag which enables setting up a queue and enabling udp packet timestamping. Signed-off-by: Jacob E Keller <jacob.e.keller@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-16ixgbe: Add new netdev op to turn spoof checking on or off per VFGreg Rose
Implements the new netdev op to allow user configuration of spoof checking on a per VF basis. V2 - Change netdev spoof check op setting to bool Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-16e1000e: locking bug introduced by commit 67fd4fcbBruce Allan
Commit 67fd4fcb (e1000e: convert to stats64) added the ability to update statistics more accurately and on-demand through the net_device_ops .ndo_get_stats64 hook, but introduced a locking bug on 82577/8/9 when linked at half-duplex (seen on kernels with CONFIG_DEBUG_ATOMIC_SLEEP=y and CONFIG_PROVE_LOCKING=y). The commit introduced code paths that caused a mutex to be locked in atomic contexts, e.g. an rcu_read_lock is held when irqbalance reads the stats from /sys/class/net/ethX/statistics causing the mutex to be locked to read the Phy half-duplex statistics registers. The mutex was originally introduced to prevent concurrent accesses of resources (the NVM and Phy) shared by the driver, firmware and hardware a few years back when there was an issue with the NVM getting corrupted. It was later split into two mutexes - one for the NVM and one for the Phy when it was determined the NVM, unlike the Phy, should not be protected by the software/firmware/hardware semaphore (arbitration of which is done in part with the SWFLAG bit in the EXTCNF_CTRL register). This latter semaphore should be sufficient to prevent resource contention of the Phy in the driver (i.e. the mutex for Phy accesses is not needed), but to be sure the mutex is replaced with an atomic bit flag which will warn if any contention is possible. Also add additional debug output to help determine when the sw/fw/hw semaphore is owned by the firmware or hardware. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Reported-by: Francois Romieu <romieu@fr.zoreil.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
2011-10-13ftmac100: fix skb truesize underestimationEric Dumazet
ftmac100 allocates a page per skb fragment. We must account PAGE_SIZE increments on skb->truesize, not the actual frag length. If frame is under 64 bytes, page is freed, so increase truesize only for bigger frames. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Po-Yu Chuang <ratbert@faraday-tech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-13niu: fix skb truesize underestimationEric Dumazet
Add a 'truesize' argument to niu_rx_skb_append(), filled with rcr_size by the caller to properly account frag sizes in skb->truesize Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-13ftgmac100: fix skb truesize underestimationEric Dumazet
ftgmac100 allocates a page per skb fragment. We must account PAGE_SIZE increments on skb->truesize, not the actual frag length. If frame is under 64 bytes, page is freed, and truesize adjusted. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Po-Yu Chuang <ratbert@faraday-tech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-13sky2: fix skb truesize underestimationEric Dumazet
sky2 allocates a page per skb fragment. We must account PAGE_SIZE increments on skb->truesize, not the actual frag length. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-13e1000e: fix skb truesize underestimationEric Dumazet
e1000e allocates a page per skb fragment. We must account PAGE_SIZE increments on skb->truesize, not the actual frag length. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-13ixgbe: fix skb truesize underestimationEric Dumazet
ixgbe allocates half a page per skb fragment. We must account PAGE_SIZE/2 increments on skb->truesize, not the actual frag length. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-13igb: fix skb truesize underestimationEric Dumazet
e1000 allocates half a page per skb fragment. We must account PAGE_SIZE/2 increments on skb->truesize, not the actual frag length. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-13e1000: fix skb truesize underestimationEric Dumazet
e1000 allocates a full page per skb fragment. We must account PAGE_SIZE increments on skb->truesize, not the actual frag length. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-13bnx2: fix skb truesize underestimationEric Dumazet
bnx2 allocates a full page per fragment. We must account PAGE_SIZE increments on skb->truesize, not the actual frag length. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-13be2net: fix truesize errorsEric Dumazet
Fix skb truesize underestimations of this driver. Each frag truesize is exactly rx_frag_size bytes. (2048 bytes per default) A driver should not use "sizeof(struct sk_buff)" at all. Signed-off-by: Eric Dumazet <eric.dumazet> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-12igb: Version bump.Carolyn Wyborny
This change updates the driver version to 3.2.10. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-12igb: Loopback functionality supports for i350 devicesAkeem G. Abodunrin
This patch adds VMDq loopback pf support for i350 devices. The patch is necessary since the register that enabled loopback was moved and renamed from DTXSWC to TXSWC. Signed-off-by: "Akeem G. Abodunrin" <akeem.g.abodunrin@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit (git 2.34.1) at 2025-09-23 01:24:03 +0000